Search Results

Search found 233 results on 10 pages for 'napoleon wai lun wong'.

Page 2/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

  • Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

    - by Boden
    I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

    Read the article

  • Replication - between pools in the same system

    - by Steve Tunstall
    OK, I fully understand that's it's been a LONG time since I've blogged with any tips or tricks on the ZFSSA, and I'm way behind. Hey, I just wrote TWO BLOGS ON THE SAME DAY!!! Make sure you keep scrolling down to see the next one too, or you may have missed it. To celebrate, for the one or two of you out there who are still reading this, I got something for you. The first TWO people who make any comment below, with your real name and email so I can contact you, will get some cool Oracle SWAG that I have to give away. Don't get excited, it's not an iPad, but it pretty good stuff. Only the first two, so if you already see two below, then settle down. Now, let's talk about Replication and Migration.  I have talked before about Shadow Migration here: https://blogs.oracle.com/7000tips/entry/shadow_migrationShadow Migration lets one take a NFS or CIFS share in one pool on a system and migrate that data over to another pool in the same system. That's handy, but right now it's only for file systems like NFS and CIFS. It will not work for LUNs. LUN shadow migration is a roadmap item, however. So.... What if you have a ZFSSA cluster with multiple pools, and you have a LUN in one pool but later you decide it's best if it was in the other pool? No problem. Replication to the rescue. What's that? Replication is only for replicating data between two different systems? Who told you that? We've been able to replicate to the same system now for a few code updates back. These instructions below will also work just fine if you're setting up replication between two different systems. After replication is complete, you can easily break replication, change the new LUN into a primary LUN and then delete the source LUN. Bam. Step 1- setup a target system. In our case, the target system is ourself, but you still have to set it up like it's far away. Go to Configuration-->Services-->Remote Replication. Click the plus sign and setup the target, which is the ZFSSA you're on now. Step 2. Now you can go to the LUN you want to replicate. Take note which Pool and Project you're in. In my case, I have a LUN in Pool2 called LUNp2 that I wish to replicate to Pool1.  Step 3. In my case, I made a Project called "Luns" and it has LUNp2 inside of it. I am going to replicate the Project, which will automatically replicate all of the LUNs and/or Filesystems inside of it.  Now, you can also replicate from the Share level instead of the Project. That will only replicate the share, and not all the other shares of a project. If someone tells you that if you replicate a share, it always replicates all the other shares also in that Project, don't listen to them.Note below how I can choose not only the Target (which is myself), but I can also choose which Pool to replicate it to. So I choose Pool1.  Step 4. I did not choose a schedule or pick the "Continuous" button, which means my replication will be manual only. I can now push the Manual Replicate button on my Actions list and you will see it start. You will see both a barber pole animation and also an update in the status bar on the top of the screen that a replication event has begun. This also goes into the event log.  Step 5. The status bar will also log an event when it's done. Step 6. If you go back to Configuration-->Services-->Remote Replication, you will see your event. Step 7. Done. To see your new replica, go to the other Pool (Pool1 for me), and click the "Replica" area below the words "Filesystems | LUNs" Here, you will see any replicas that have come in from any of your sources. It's a simple matter from here to break the replication, which will change this to a "Local" LUN, and then delete the original LUN back in Pool2. Ok, that's all for now, but I promise to give out more tricks sometime in November !!! There's very exciting stuff coming down the pipe for the ZFSSA. Both new hardware and new software features that I'm just drooling over. That's all I can say, but contact your local sales SC to get a NDA roadmap talk if you want to hear more.   Happy Halloween,Steve 

    Read the article

  • What are the common linux ( RH ) commands for SAN related activities ? How to check if a LUN is attached to the computer ?

    - by Nishant
    How do I check if a LUN has been presented to my server ? What are the Linux commands for that ? Do the LUNS show up in a fdisk -l command like a normal /dev/sda gets listed ? What are other commands assosicaed with general SAN related checks in Linux ? What is WWN and how does that have any relevance and Also please explain multipathing why if we have LUN's , what is the use of multipathing then ? Bit lenghty but I am not able to get a grasp on the topic . Any help would be appreciated .

    Read the article

  • Can I have different ESX hosts accessing the same LUN over different protocols?

    - by Kevin Kuphal
    I currently have a cluster of two ESX 3.5U2 servers connected directly via FiberChannel to a NetApp 3020 cluster. These hosts mount four VMFS LUNs for virtual machine storage. Currently these LUNs are only made available via our FiberChannel initator in the Netapp configuration If I were to add an ESXi host to the cluster for internal IT use can I: Make the same VMFS LUNs available via the iSCSI initiator on the Netapp Connect this ESXi host to those LUNs via iSCSI Do all of this while the existing two ESX hosts are connected to those LUNs via FiberChannel Does anyone have experience with this type of mixed protocol environment, specifically with Netapp?

    Read the article

  • Create XFS volume on /dev/sg* device

    - by cpt.Buggy
    Now I have couple of Supermicro 24x2Tb SATA servers and I have now idea how to get access to disks. I need to create XFS volume on each of them but really don't know how to do it, because fdisk doesn't see them. # sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi1 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi6 channel=1 id=8 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] ... ... ... /dev/sg25: scsi6 channel=1 id=31 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] /dev/sg26: scsi6 channel=3 id=0 lun=0 [em] LSILOGIC SASX36 A.1 7017 [rmb=0 cmdq=1 pqual=0 pdev=0xd] # sg_map /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 .. ... ... /dev/sg25 /dev/sg26 I can't use fdisk and mkfs, what should I do?

    Read the article

  • Migrating Virtual Iron guest to Oracle VM 3.x

    - by scoter
    As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

    Read the article

  • What are the common Linux commands for SAN-related activities? How do I check if a LUN is attached to the computer?

    - by Nishant
    How do I check if a LUN has been presented to my server? What are the Linux commands for that? Do the LUNs show up in a fdisk -l command like a normal /dev/sda gets listed? What are other commands associated with general SAN related checks in Linux? What is WWN and how does that have any relevance? If we have LUNs, what is the use of multipathing? Bit lengthy but I am not able to get a grasp on the topic. Any help would be appreciated.

    Read the article

  • Required Skill Sets Of A Software Architect

    The question has been asked as to what is the required skill sets of a software architect. The answer to this is that it truly depends. When I state that it depend, it depends on the organization, industry, and skill sets available on the open market and internally within a company. With open ended skill sets even Napoleon Dynamite could be an architect. Napoleon Dynamite’s Skills Pedro: Have you asked anybody yet? Napoleon Dynamite: No, but who would? I don't even have any good skills. Pedro: What do you mean? Napoleon Dynamite: You know, like nunchuck skills, bow hunting skills, computer hacking skills... Girls only want boyfriends who have great skills. Pedro: Aren't you pretty good at drawing, like animals and warriors and stuff? This example might be a little off base but it does illustrate a point. What are the real required skills of a software architect? In my opinion, an architect needs to demonstrate the knowledge of the following three main skill set categories so that they are successful. General Skill Sets of an Architect Basic Engineering Skills Organizational  Skills Interpersonal Skills Basic Engineering Skills are a very large part of what a software architect deal with on a daily bases when designing or updating systems. Think about it, how good would a lead mechanic be if they did not know how to fix or repair cars? They would not be, and that is my point that architects need to have at least some basic skills regarding engineering. The skills listed below are generic in nature because they change from job to job, so in this discussion I am trying to focus more on generalities so that anyone can apply this information to their individual situation. Common Basic Engineering Skills Data Modeling Code Creation Configuration Testing Deployment/Publishing System and Environment Knowledge Organizational Skills If an Architect works for or with an origination then they will need strong organization skills to survive. An architect is no use to a project if the project is missed managed. Additionally, budgets and timelines can really affect a company and their products when established deadlines are repeated not meet. By not meeting these timelines a company is forced to cancel the project and waste all the money and time spent or spend more money until it is completed, if it is ever completed. Common Organizational Skills Project Management Estimation (Cost and Time) Creation and Maintenance of Accepted Standards Interpersonal Skills For me personally Interpersonal skill ranks above the other types of skill sets because an architect can quickly pick up the other two skill sets by communicating with other team/project members so that they are quickly up to speed on a project. Additionally, in order for an architect to manage a project or even derive rough estimates they will more than likely have to consult with others actually working on the code (Programmers/Software Engineers) to get there estimates since they will be the ones actually working on the changes to be implemented. Common Interpersonal Skills Good Communicator Focus on projects success over personal Honors roles within a team Reference: Taylor, R. N., Medvidovic, N., & Dashofy, E. M. (2009). Software architecture: Foundations, theory, and practice Hoboken, NJ: John Wiley & Sons

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by Graeme Donaldson
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

  • Managing a test iSCSI target server

    - by dyasny
    Hi all, I am using a RHEL server with a few hard drives, and tgtd as the iscsi target software. I a looking for a way to allocate and deallocate space and targets with that space, without restarting my system, or harming other LUNs. Currently, all my HDDs are PVs in a single VG, and I lvcreate/lvremove as required, and then export the allocated LVs using a tgt script: usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=1 --targetname iqn.2001-04.com.lab.gss:300gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_300Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=2 --targetname iqn.2001-04.com.lab.gss:200gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 2 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_200Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 2 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=3 --targetname iqn.2001-04.com.lab.gss:100gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 3 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_100Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 3 -I ALL tgtadm --mode target --op show So in order to remove a LUN, I stop the tgtd service, lvremove the lv, and remove the entry from the iscsi target script When I add a lun, I run lvcreate, and then add an entry to the script and run it. This is not quite optimal, since restarting the service is a bad idea while other LUNs are busy, so I am looking for a more scalable and safer way. Thanks

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by ThatGraemeGuy
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

  • Port-Forwarding in Virtual Box

    - by davidzaz
    I have Virtual Box setup with the following commands: vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/HostPort" 50000 vboxmanage setextradata myVm `"VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/GuestPort" 50000 vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/Protocol" TCP On the host machine, the following command times out: telnet localhost 50000 What am I doing wrong? The above command does work on the guest machine.

    Read the article

  • How to measure code quality? [closed]

    - by Lo Wai Lun
    Is there a methodology or any objective standard to determine whether the code of the project is well-written? How to measure in a structural and scientific manner to access the quality of the code? Many people say code review is important and always do encapsulation and data abstraction to ensure the quality. How can we determine the quality? Can a structural, organised software design diagrams drawn implies good quality of code ? If we type the code with good cautions of encapsulation and data abstraction, why review anyway?

    Read the article

  • Version Control without CVS

    - by Lo Wai Lun
    My partners and I have been building an application that requires users to authenticate with password and user ID for member registration and transaction. Very often, tasks for designing UI, Datagrid view event trigger and data access using SQL are allocated to different person. Sometimes, there are different versions to be updated but the database structure used are different If everybody finishes their own part and submit the project on their own onto the shared cloud rivers, there must be a huge cost for software maintenance and re-engineering. How should the task to be submitted so as to minimize the cost for re-engineering without the software like winCVS and Tortoise HG?

    Read the article

  • Eyes easily get dry and itchy [closed]

    - by Lo Wai Lun
    I have currently working as a programmer for half a year Very often, I often looking the monitors with natural contrast and brightness. Still when the weather is getting cold, my eyes feel dry and itchy. Sometimes I can see some red 'tree-roots' (capillaries) near iris. At home, i sometimes use my notebook for 13" or Galaxy Nexus Brightness are also natural contrast and brightness , a bit dim How should we take care of our eyes under this scenario?

    Read the article

  • How important are unit tests in software development?

    - by Lo Wai Lun
    We are doing software testing by testing a lot of I/O cases, so developers and system analysts can open reviews and test for their committed code within a given time period (e.g. 1 week). But when it come across with extracting information from a database, how to consider the cases and the corresponding methodology to start with? Although that is more likely to be a case studies because the unit-testing depends on the project we have involved which is too specific and particular most of the time. What is the general overview of the steps and precautions for unit-testing?

    Read the article

  • What is the career path for a software developer/ programmer? [closed]

    - by Lo Wai Lun
    I've been working as a programmer for a few months and I often study CCNA , CISSP for future. Besides simple coding I was working on specs, designing applications, and all those around-like things. My question is, I want to be a information / system security specialist. what's the career path I should be aiming for? Is it like working on code for the rest of my life? :) Restart my career from the network engineer ? Or do programmers make a good manager-position people ? I know it's very subjective. Thing is, lately I find myself much more into the designing/working on specs part of the development project then the coding itself. How do you see it? Would you like to go from development to information security? Would you like to work on a project with a manager that used to be a coder?

    Read the article

  • How important is the unit test in the software development?

    - by Lo Wai Lun
    We are doing software testing by testing a lot if I/O cases, so developers and system analysts can open reviews and test for their committed code within a given time period (e.g. 1 week). But when it come across with extracting information from a database, how to consider the cases and the corresponding methodology to start with? Although that is more likely to be a case studies because the unit-testing depends on the project we have involved which is too specific and particular most of the time. What is the general overview of the steps and precautions for unit-testing?

    Read the article

  • Entity Framework with SQL Server 2000 (APPLY Operator) issue

    - by How Lun
    Hello, I have a simple Linq query below: var seq = (from n in GetObjects() select n.SomeKey) .Distinct() .Count(); This query works find with SQL Server 2005 and above. But, this start to give headache when I hooked the EF to SQL Server 2000. Because EF is using APPLY operator which only SQL Server 2005 and above can be supported. I do not know why the hell EF is using APPLy operator instead of sub queries. My current work around is: var seq = (from n in GetObjects() select n.SomeKey) .Distinct() .ToList() .Count(); But, I can forsee more problems to come. The above query is just a simple one. Did anyone come across such issue? And how you guys work around it? Or is there a way to force EF not to use APPLY operator? Any help will be very much appreciated. How Lun.

    Read the article

  • Oracle VM repository creation seems contradictory to its server pool?

    - by Michael
    I found something contradictory in Oracle VM. Clustered server pool creation in Oracle VM would format my FC LUN as ocfs2 , and start o2cb & ocfs2 services to build cluster environment. After that, when I wanted to create repository on the serverpool, unexpectedly, it told me that the physical disk I chose which is also my FC LUN, already contains a file system. What a contradictory! So what, delete the file system in serverpool? If so, why created it before?! OVM> list physicaldisk Command: list physicaldisk Status: Success Time: 2012-09-10 06:44:42.660 Data: id:0004fb00001800007765e62381895f61 name:OVM_HDS OVM> create serverpool clusterenable=true virtualip=10.84.21.123 physicaldisk=OVM_HDS name=ovmserverpool Serverpool creation took quite a long time since my FC LUN was big. When the creation completed, my FC LUN was created as ocfs2 and o2cb & ocfs2 services were started on my ovm servers successfully. But then repository creation indeed throws me a big surprise ... OVM> create repository serverpool=ovmserverpool physicaldisk=OVM_HDS name=ovmrepo Command: create repository serverpool=ovmserverpool physicaldisk=OVM_HDS name=ovmrepo Status: Failure Time: 2012-09-10 06:23:44.656 Error Msg: com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_002026E Cannot use or delete physical disk: OVM_HDS, it already contains a file system: [Pool filesystem for ovmserverpool] Mon Sep 10 06:23:44 CST 2012 What should I do now? Delete the filesystem using dd command? That would destroy the serverpool, right? I'm really confused. My OVM Manager version is 3.1.1.399 which is the latest. Any tips are appreciated. Thanks.

    Read the article

  • Cannot increase Datastore

    - by k4w4zz
    Hello, We have an ESX 4.0 cluster with 2 hosts, EMC Clarion SAN storage with 10 LUNs. We have added 2 new 400 GB LUNs. All the LUNs are visible from both hosts. I have extended an existing 500 GB datastore with one of these 400 GB LUNs - the new datastore size is now 900 GB. I'd like to do the same operation with the second 400 GB LUN to extend another existing datastore but I'm not able to do it. The LUN is available to create a brand new datastore but is not visible to extend an existing one. I don't understand why everything was fine with the other one and why can't I do the same exact operation with this LUN. The result is the same on both hosts. The SAN admin have erased and re-created several times this LUN. I have rescan the HBA each time. In attachment you can find the result of the esxcfg-mpath -l and fdisk -l commands on both servers. Does somebody have an idea please?

    Read the article

  • Replicate / SYNC / Copy thousands of files

    - by rihatum
    Windows 32BIT Box (Server OS) 4GB RAM a 800GB LUN Mapped to the above box as a local drive Around 700GB of text files (Yes text files and a few thousand word documents) nested in thousands of directories. I need to move this to a new storage and map another server to it. What would be the best way to go about it ? What I did was mapped the existing LUN to our new box and mapped a LUN from the New storage to the new box too, and tried copying (windows copy) but that wasn't good / fast enough considering the downtime. I am now looking for either a script which will do this or a utility (prefer opensource / free) to move this size of data at a good speed. 2 x 1GB Nics teamed ether channel 2GBPs Any suggestions or pointers would be off great help Thanks !

    Read the article

  • MSA20 RAID5 recovery failure due to URE on another disk

    - by Andrey
    I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ADU report that one of the disk has "Errors Logged = 5566" and according SCSI specifications it is URE (Sense Code=0x11, Qualifier=0x00). In serial log I also see URE error. It seems that Raid5 can't be rebuilt because of this. So I have a few questions: Is there a way to recover raid5 still? If I leave new disk that was replaced and remove disk with URE, will other LUNs be destroyed or just failed LUN? If all LUNs will fail what is the sense to make each LUN with own raid on one disk group array if 2 failed disk can destroy all? As I understand the preferred way is to create one disk array for one LUN in future and not one array with few LUNs? Thanks.

    Read the article

  • How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

    - by David Siegel
    How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >