Search Results

Search found 9421 results on 377 pages for 'scikit learn'.

Page 206/377 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • PASS Summit – looking back on my first time

    - by Fatherjack
      So I was lucky enough to get my first experience of PASS Summit this year and took some time beforehand to read some blogs and reference material to get an idea on what to do and how to get the best out of my visit. Having been to other conferences – technical and non-technical – I had a reasonable idea on the routine and what to expect in general. Here is a list of a few things that I have learned/remembered as the week has gone by. Wear comfortable shoes. This actually needs to be broadened to Take several pairs of comfortable shoes. You will be spending many many hours, for several days one after another. Having comfortable feet that can literally support you for the duration will make the week in general a whole lot better. Not only at the conference but getting to and from you could well be walking. In the evenings you will be walking around town and standing talking in various bars and clubs. Looking back, on some days I was on my feet for over 20 hours. Make friends. This is a given for the long term benefits it brings but there is also an immediate reward in being at a conference with a friend or two. Some events are bigger and more popular than others and some have the type of session that every single attendee will want to be in. This is great for those that get in but if you are in the bathroom or queuing for coffee and you miss out it sucks. Having a friend that can get in to a room and reserve you a seat is a great advantage to make sure you get the content that you want to see and still have the coffee that you need. Don’t go to every session you want to see This might sound counter intuitive and it relies on the sessions being recorded in some way to guarantee you don’t totally miss out. Both PASS Summit and SQL Bits sessions are recorded (summit is audio, SQLBits is video) and this means that if you get into a good conversation with someone over a coffee you don’t have to break it up to go to a session. Obviously there is a trade-off here and you need to decide on the tipping point for yourself but a conversation at a place like this could make a big difference to the next contract or employer you have or it might simply be great catching up with some friends you don’t see so often. Go to at least one session you don’t want to Again, this will seem to be contrary to normal logic but there is no reason why you shouldn’t learn about a part of SQL Server that isn’t part of your daily routine. Not only will you learn something new but you will also pick up on the feelings and attitudes of the people in the session. So, if you are a DBA, head off to a BI session and so on. You’ll hear BI speakers speaking to a BI audience and get to understand their point of view and reasoning for making the decisions they do. You will also appreciate the way that your decisions and instructions affect the way they have to work. This will help you a lot when you are on a project, working with multiple teams and make you all more productive. Socialise While you are at the conference venue, speak to people. Ask questions, be interested in whoever you are speaking to. You get chances to talk to new friends at breakfast, dinner and every break between sessions. The only people that might not talk to you would be speakers that are about to go and give a session, in most cases speakers like peace and quiet before going on stage. Other than that the people around you are just waiting for someone to talk to them so make the first move. There is a whole lot going on outside of the conference hours and you should make an effort to join in with some of this too. At karaoke evenings or just out for a quiet drink with a few of the people you meet at the conference. Either way, don’t be a recluse and hide in your room or be alone out in the town. Don’t talk to people Once again this sounds wrong but stay with me. I have spoken to a number of speakers since Summit 2013 finished and they have all mentioned the time it has taken them to move about the conference venue due to people stopping them for a chat or to ask a question. 45 minutes to walk from a session room to the speaker room in one case. Wow. While none of the speakers were upset about this sort of delay I think delegates should take the situation into account and possibly defer their question to an email or to a time when the person they want is clearly less in demand. Give them a chance to enjoy the conference in the same way that you are, they may actually want to go to a session or just have a rest after giving their session – talking for 75 minutes is hard work, taking an extra 45 minutes right after is unbelievable. I certainly hope that they get good feedback on their sessions and perhaps if you spoke to a speaker outside a session you can give them a mention in the ‘any other comments’ part of the feedback, just to convey your gratitude for them giving up their time and expertise for free. Say thank you I just mentioned giving the speakers a clear, visible ‘thank you’ in the feedback but there are plenty of people that help make any conference the success it is that would really appreciate hearing that their efforts are valued. People on the registration desk, volunteers giving schedule guidance and directions, people on the community zone are all volunteers giving their time to help you have the best experience possible. Send an email to PASS and convey your thoughts about the work that was done. Maybe you want to be a volunteer next time so you could enquire how you get into that position at the same time. This isn’t an exclusive list and you may agree or disagree with the points I have made, please add anything you think is good advice in the comments. I’d like to finish by saying a huge thank you to all the people involved in planning, facilitating and executing the PASS Summit 2013, it was an excellent event and I know many others think it was a totally worthwhile event to attend.

    Read the article

  • Blogging locally and globally–my experience

    - by DigiMortal
    In Baltic MVP Summit 2011 there was discussion about having two blogs - one for local and another for global audience – and how to publish once written information in these blogs. There are many ways how to optimize your blogging activities if you have more than one audience and here you can find my experiences, best practices and advices about this topic. My two blogs I have to working blogs: this one here technology and programming blog for local market My local blog is almost five years old and it makes it one of the oldest company blogs in Estonia. It is still active and I write there as much as I have time for it. This blog here is active since September 2007, so it is about 3.5 years old right now. Both of these blogs are  my major hits in my MVP carrier and they have very good web statistics too. My local blog My local blog is about programming, web and technology. It has way wider target audience then this blog here has. By example, in my local blog I blog also about local events, cool new concept phones, different webs providing some interesting services etc. But local guys can find there also my postings about how to solve one or another programming problem and postings about Microsoft technologies I am playing with. This far my local blog has a lot of readers for such a small country that Estonia is. This blog has made me a lot of cool contacts and I have had there a lot of interesting discussions about different technical topics. Why I started this blog? Living in small country is different than living in big country. In small country you have less people and therefore smaller audience so you have to target more than one technical topic to find enough readers. In a same time you are still interested in your main topics and you want to reach to more people who are sharing same interests with you. Practically one day y will grow out from local market and you go global. This is how this blog was born. Was it worth to create, promote and mess with it? Every second I have put on my time to this blog has been worth of it. Thanks to this blog I have found new good friends and without them I think it is more boring to work on different problems and solutions. Defining target audiences One thing you should always do when having more than one blog is defining target audiences. If you are just technomaniac interested in sharing your stuff and make some new friends and have something to write to your MVP nomination form then you don’t have to go through complex targeting process. You can do it simple way and same effectively. Here is how I defined target audiences to my blogs: local blog – reader of my local blog is IT professional, software developer, technology innovator or just some guy who is interested in technology,   this blog – reader of this blog is experienced professional software developer who works on Microsoft technologies or software developer who is open minded and open to new technologies and interesting solutions to development problems. You can see how local blog – due to small market with less people – has wider definition for audience while this blog is heavily targeted to Microsoft technologies and specially to software development. On practical side these decisions are also made well I think because it is very hard to build up popular common IT blog. On global level it is better to target some specific niche and find readers who are professionals on your favorite topics. Thanks to this blog I have found new friends who are professional developers and I am very happy about all the discussions I have had with them. Publishing content to different blogs My local blog and this blog have some overlapping topics like .NET, databases and SEO. Due to this overlapping there is question: when I write posting to my local blog then should I have to publish same thing in my global blog? And if I write something to my global blog then should I publish same thing also in my local blog? Well, it really depends on the definition of your target audiences. If they match then of course it is good idea to translate you post and publish it also to another blog. But if you have different audiences then you may need to modify your posting before publishing it. The questions you have to answer are: is target audience interested in this topic? is target audience expecting more specific and deeper handling of this topic or are they expecting more general handling of topic? is the problem you are discussing actual for target audience or not? You have to answer these questions and after that make your decision. If you need to modify your original posting then take some time and do it. Provide quality to all your readers because they will respect you if you respect them. Cross-posting and referencing It is tempting to save time that preparing some blog post takes and if you have are done with posting in one blog it may seem like good idea to make short posting to another blog and add reference to first one where topic is discussed longer. Well, don’t do it – all your readers expect good quality content from you and jumping from one blog post to another is disturbing for them. Of course, there is problem with differences between target audiences. You may have wider target audience and some people may be interested in more specific handling of topic. In this case feel free to refer your blog you are writing in english. This is not working very well in opposite direction because almost all my global blog readers understand english but not estonian. By example, estonian language is complex one and online translating tools make very poor translations from estonian language. This is why I don’t even plan to publish postings here that refer to my local blog for more information. I am keeping these two blogs as two different worlds and if there is posting that fits well to both blogs I will write my posting to one blog and then answer previous three questions before posting same thing to another blog. Conclusion Growing out of your local market is not anything mysterious if you are living in small country. As it is harder to find people there who are interested in same topics with you then sooner or later you will start finding these new contacts from global audience. Global audience is bigger and to be visible there you must provide high quality content to your audience. It is something you will learn over time and you will learn every day something new when you are posting to your global blog. You may ask: if global blog is much more complex thing to do then is it worth to do at all? My answer is: yes, do it for sure. It is not easy thing to do when you start but if you work on your global blog and improve it over time you will get over all obstacles pretty soon. Just don’t forget one thing – content is king and your readers expect high quality from you.

    Read the article

  • “It’s only test code…”

    - by Chris George
    “Let me hack this in, it’s only test code”, “Don’t worry about getting it reviewed, it’s only test code”, “It doesn’t have to be elegant or efficient, it’s only test code”… do these phrases sound familiar? Chances are if you’ve working with test automation, at one point or other you will have heard these phrases, you have probably even used them yourself! What is certain is that code written under this “it’s only test code” mantra will come back and bite you in the arse! I’ve recently encountered a case where a test was giving a false positive, therefore hiding a real product bug because that test code was very badly written. Firstly it was very difficult to understand what the test was actually trying to achieve let alone how it was doing it, and this complexity masked a simple logic error. These issues are real and they do happen. Let’s take a step back from this and look at what we are trying to do. We are writing test code that tests product code, and we do this to create a suite of tests that will help protect our software against regressions. This test code is making sure that the product behaves as it should by employing some sort of expected result verification. The simple cases of these are generally not a problem. However, automation allows us to explore more complex scenarios in many more permutations. As this complexity increases then so does the complexity of the test code. It is at this point that code which has not been architected properly will cause problems.   Keep your friends close… So, how do we make sure we are doing it right? The development teams I have worked on have always had Test Engineers working very closely with their Software Engineers. This is something that I have always tried to take full advantage of. They are coding experts! So run your ideas past them, ask for advice on how to structure your code, help you design your data structures. This may require a shift in your teams viewpoint, as contrary to this section title and folklore, Software Engineers are not actually the mortal enemy of Test Engineers. As time progresses, and test automation becomes more and more ingrained in what we do, the two roles are converging more than ever. Over the 16 years I have spent as a Test Engineer, I have seen the grey area between the two roles grow significantly larger. This serves to strengthen the relationship and common bond between the two roles which helps to make test code activities so much easier!   Pair for the win Possibly the best thing you could do to write good test code is to pair program on the task. This will serve a few purposes. you will get the benefit of the Software Engineers knowledge and experience the Software Engineer will gain knowledge on the testing process. Sharing the love is a wonderful thing! two pairs of eyes are always better than one… And so are two brains. Between the two of you, I will guarantee you will derive more useful test cases than if it was just one of you.   Code reviews Another policy which certainly pays dividends is the practice of code reviews. By having one of your peers review your code before you commit it serves two purposes. Firstly, it forces you to explain your code. Just the act of doing this will often pick up errors in your code. Secondly, it gets yet another pair of eyes on your code! I cannot stress enough how important code reviews are. The benefits they offer apply as much to product code as test code. In short, Software and Test Engineers should all be doing them! It can be extended even further by getting test code reviewed by a Software Engineer and a Test Engineer, and likewise product code. This serves to keep both functions in the loop with changes going on within your code base.   Learn from your devs I briefly touched on this earlier but I’d like to go into more detail here. Pairing with your Software Engineers when writing your test code is such an amazing opportunity to improve your coding skills. As I sit here writing this article waiting to be called into court for jury service, it reminds me that it takes a lot of patience to be a Test Engineer, almost as much as it takes to be a juror! However tempting it is to go rushing in and start writing your automated tests, resist that urge. Discuss what you want to achieve then talk through the approach you’re going to take. Then code it up together. I find it really enlightening to ask questions like ‘is there a better way to do this?’ Or ‘is this how you would code it?’ The latter question, especially, is where I learn the most. I’ve found that most Software Engineers will be reluctant to show you the ‘right way’ to code something when writing tests because they perceive the ‘right way’ to be too complicated for the Test Engineer (e.g. not mentioning LINQ and instead doing something verbose). So by asking how THEY would code it, it unleashes their true dev-ness and advanced code usually ensues! I would like to point out, however, that you don’t have to accept their method as the final answer. On numerous occasions I have opted for the more simple/verbose solution because I found the code written by the Software Engineer too advanced and therefore I would find it unreadable when I return to the code in a months’ time! Always keep the target audience in mind when writing clever code, and in my case that is mostly Test Engineers.  

    Read the article

  • Returning a list from a function in Python

    - by Jasper
    Hi, I'm creating a game for my sister, and I want a function to return a list variable, so I can pass it to another variable. The relevant code is as follows: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" Then it is passed to another function that was imported from another module from potatohead import * ... welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) the code for the PotatoHead object is in the potatohead.py module which was imported above, and is as follows: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) However, when I run the program this error appears: Traceback (most recent call last): File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/main.py", line 158, in <module> myPotatoHead = PotatoHead(MCreatePH) File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/potatohead.py", line 15, in __init__ self.name = data[0] TypeError: 'NoneType' object is unsubscriptable What am i doing wrong? -----EDIT----- The program finishes as so: Step 7 of 7: Your PotatoHead will now be created... Creating variables... inputPHName inputPHFirstToy Then it goes to the Tracback -----EDIT2----- This is the EXACT code I'm running in its entirety: #+--------------------------------------+# #| main.py |# #| A main module for the Potato Head |# #| Game to pull the other modules |# #| together and control through user |# #| input |# #| Author: |# #| Date Created / Modified: |# #| 3/2/10 | 20/2/10 |# #+--------------------------------------+# Tested: No #Import the required modules: import time import random import sys from potatohead import * from toy import * #Start the Game: def welcomeMessage(): print "----- START NEW GAME -----------------------" print "==Print Welcome Message==" print "loading... \t loading... \t loading..." time.sleep(1) print "loading..." time.sleep(1) print "LOADED..." print; print; print; print """Hello, Welcome to the Potato Head Game. In this game you can create a Potato Head, and look after it, like a Virtual Pet. This game is constantly being updated and expanded. Please look out for updates. """ #Choose whether to start a new game or load a previously saved game: def startGame(): while 1: print "--------------------" print """ Choose an option: New_Game or Load_Game """ startGameInput = raw_input('>>> >') if startGameInput == 'New_Game': startNewGame() break elif startGameInput == 'Load_Game': print "This function is not yet supported" print "Try Again" print else: print "You must have mistyped the command: Type either 'New_Game' or 'Load_Game'" print #Set the new game up: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" #Run Program: welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) The potatohead.py module is as follows: #+--------------------------------------+# #| potatohead.py |# #| A module for the Potato Head Game |# #| Author: |# #| Date Created / Modified: |# #| 24/1/10 | 24/1/10 |# #+--------------------------------------+# Tested: Yes (24/1/10) #Create the PotatoHead class: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) #Define the phStats variable, enabling easy display of PotatoHead attributes: def phDefStats(self): self.phStats = """Your Potato Head's Stats are as follows: ---------------------------------------- Name: \t\t""" + self.name + """ Gender: \t\t""" + self.gender + """ Colour: \t\t""" + self.colour + """ Favourite Thing: \t""" + self.favouriteThing + """ First Toy: \t""" + self.firstToy + """ Age: \t\t""" + self.age + """ Education: \t""" + str(float(self.eduScience) + float(self.eduEnglish) + float(self.eduMaths)) + """ -> Science: \t""" + self.eduScience + """ -> English: \t""" + self.eduEnglish + """ -> Maths: \t""" + self.eduMaths + """ Fitness: \t""" + self.fitness + """ Happiness: \t""" + self.happiness + """ Health: \t""" + self.health + """ Hunger: \t""" + self.hunger + """ Tiredness: \t""" + self.tiredness + """ Toys: \t\t""" + str(self.toys) + """ Time: \t\t""" + self.time + """ """ #Change the PotatoHead's favourite thing: def phChangeFavouriteThing(self, newFavouriteThing): self.favouriteThing = newFavouriteThing phChangeFavouriteThingMsg = "Your Potato Head's favourite thing is " + self.favouriteThing + "." #"Feed" the Potato Head i.e. Reduce the 'self.hunger' attribute's value: def phFeed(self): if float(self.hunger) >=3.0: self.hunger = str(float(self.hunger) - 3.0) elif float(self.hunger) < 3.0: self.hunger = '0.0' self.time = str(int(self.time) + 1) #Pass time #"Exercise" the Potato Head if between the ages of 5 and 25: def phExercise(self): if float(self.age) < 5.1 or float(self.age) > 25.1: print "This Potato Head is either too young or too old for this activity!" else: if float(self.fitness) <= 8.0: self.fitness = str(float(self.fitness) + 2.0) elif float(self.fitness) > 8.0: self.fitness = '10.0' self.time = str(int(self.time) + 1) #Pass time #"Teach" the Potato Head: def phTeach(self, subject): if subject == 'Science': if float(self.eduScience) <= 9.0: self.eduScience = str(float(self.eduScience) + 1.0) elif float(self.eduScience) > 9.0 and float(self.eduScience) < 10.0: self.eduScience = '10.0' elif float(self.eduScience) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'English': if float(self.eduEnglish) <= 9.0: self.eduEnglish = str(float(self.eduEnglish) + 1.0) elif float(self.eduEnglish) > 9.0 and float(self.eduEnglish) < 10.0: self.eduEnglish = '10.0' elif float(self.eduEnglish) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'Maths': if float(self.eduMaths) <= 9.0: self.eduMaths = str(float(self.eduMaths) + 1.0) elif float(self.eduMaths) > 9.0 and float(self.eduMaths) < 10.0: self.eduMaths = '10.0' elif float(self.eduMaths) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" else: print "That subject is not an option..." print "Please choose either Science, English or Maths" self.time = str(int(self.time) + 1) #Pass time #Increase Health: def phGoToDoctor(self): self.health = '10.0' self.time = str(int(self.time) + 1) #Pass time #Sleep: Age, change stats: #(Time Passes) def phSleep(self): self.time = '0' #Resets time for next 'day' (can do more things next day) #Increase hunger: if float(self.hunger) <= 5.0: self.hunger = str(float(self.hunger) + 5.0) elif float(self.hunger) > 5.0: self.hunger = '10.0' #Lower Fitness: if float(self.fitness) >= 0.5: self.fitness = str(float(self.fitness) - 0.5) elif float(self.fitness) < 0.5: self.fitness = '0.0' #Lower Health: if float(self.health) >= 0.5: self.health = str(float(self.health) - 0.5) elif float(self.health) < 0.5: self.health = '0.0' #Lower Happiness: if float(self.happiness) >= 2.0: self.happiness = str(float(self.happiness) - 2.0) elif float(self.happiness) < 2.0: self.happiness = '0.0' #Increase the Potato Head's age: self.age = str(float(self.age) + 0.1) The game is still under development - There may be parts of modules that aren't complete, but I don't think they're causing the problem

    Read the article

  • INS-40719 error when Install Oracle RAC?

    - by Data-Base
    I'm tying to (learn how to) install Oracle RAC 11g on CentOS 6 all went OK so far but I get INS-40719 Error message regarding SCAN Name I do not have DNS server and I'm not going to try to use it on this setup I add this line to /etc/hosts 192.168.244.100 rac-cluster then used "rac-cluster" as the SCAN name and it's still not working with the same error message! any one can guide me on how to make it work? 1- do I have to add "192.168.244.100 rac-cluster" to /etc/hosts on both nodes? 2- do I need to edit/add any thing else on the nodes? cheers

    Read the article

  • URL Rewrite in IIS7 Web Service - WebService.asmx => WebService in the SOAP doc

    - by Robert Kaucher
    I have an IIS7.5 (Server 2008 R2) based web service that I would like to make as independant on the current implementations technology as possible. I am using the URL rewrite module (http://learn.iis.net/page.aspx/734/url-rewrite-module/) to remove the .asmx portion of the URL and that is working fine for the HTTP request portion. However, I still see .asmx in the WSDL file when I access it. I was wondering if anyone has done this and if so, what advice could be offered. It doesn't seem like a hard problem to solve. But I have tries a number of things with "custom tags" and can't seem to get it working to save my life.

    Read the article

  • MDaemon vs Exchange (2007-2010). Which one should we choose ?

    - by Deniz
    We are at the verge of a mail server decision. We do currently use 2 mail servers : MDaemon 10 and Exchange 2003. We are planning to use a company and customer wide one point solution. Our main candidates are MDaemon 11 and Exchange 2007 or 2010. We would like to learn other users experiences on those solutions. The server-side experiences, the user-side experiences, feature set, TCO, support options etc. And if there were other solutions (like MDaemon 11 + Exchange or anything else) what would you suggest ?

    Read the article

  • Which Linux distro for Mac Mini?

    - by spoon16
    I recently received a Mac Mini and would like to set it up as a web server and git source server. I would like to learn Linux so am interested in setting up my Mac Mini with Linux instead of OSX. Here are the main things that I will be using the Mac Mini for. git Repositories (via Gitosis) build server (build projects in git repositories using commit hooks and run tests) simple websites (PHP) learning C++ in a non-Windows environment What distribution would you recommend? Please provide some detail in your answer so that I can make an meaningful decision. Because I am looking to use the mini as more of a server than a normal desktop machine I was thinking of Ubuntu Server, I'm not sure if that is over kill though given the hardware I am using.

    Read the article

  • Which Linux distro for Mac Mini?

    - by spoon16
    I recently received a Mac Mini and would like to set it up as a web server and git source server. I would like to learn Linux so am interested in setting up my Mac Mini with Linux instead of OSX. Here are the main things that I will be using the Mac Mini for. git Repositories (via Gitosis) build server (build projects in git repositories using commit hooks and run tests) simple websites (PHP) learning C++ in a non-Windows environment What distribution would you recommend? Please provide some detail in your answer so that I can make an meaningful decision. Because I am looking to use the mini as more of a server than a normal desktop machine I was thinking of Ubuntu Server, I'm not sure if that is over kill though given the hardware I am using.

    Read the article

  • Trouble configuring firewall for FTP on Windows Server 2008 R2

    - by x3ro
    Ok, I'm having the exact same problem as in this question http://serverfault.com/questions/59635/outbound-ftp-on-server-2008-r2-stalls but the accepted answer didn't help me much... I followed the third step of this http://learn.iis.net/page.aspx/309/configuring-ftp-firewall-settings/ guide in order to configure my firewall for FTP, and I am able to authenticate, however, the data channel doesn't seem to be passing through the firewall. If I disable the firewall, everything works fine. Hope someone can help me, as this is really starting to annoy me. Best regards, x3ro

    Read the article

  • Should I be afraid of Linux server administration?

    - by markle976
    I've been trying to figure out what to focus on. I finally realized that the root of my quandary is that I am unsure about learning Linux server administration. I have been getting pretty good with PHP/MySQL and web development, but I am not very familiar with Linux. Is it hard to learn? What would I need to know in order to manage a LAMP stack? Also, which version is most used in enterprises? I think I have also hesitated to dive in because it seems like it is mostly used in small companies, but I guess that could be a good thing.

    Read the article

  • How to start using Wget?

    - by brilliant
    Please, forgive me for asking this question. Usually I would try to learn thisngs myself first before bothering others, but my situation is urgent - if I don't act now and don't download all my family pictures from this website, it will be closed in about two weeks from now and I will loose all of them. So, please help me. I have already asked a question about how to download from my website all my pictures automatically here and I was advised to use Wget. But I don't know the very basics as to how to use it. The basics are not explained on that page. In that questioned that I asked I was even given this line: wget -r -A .jpg,.gif,.png but I don't know what I am supposed to do with it in order to get the Wget going and download all the pictures from my website. Please, help me somebody!

    Read the article

  • How do I get around "Access is Denied" [Number: 5 (0x80070005)], with IIS6/FastCGI and PHP 5.2.3?

    - by Evan Carroll
    I'm getting this error with IIS 6.0 (i assume), and PHP 5.2.3, and FastCGI FastCGI Error The FastCGI Handler was unable to process the request. Error Details: Error Number: 5 (0x80070005). Error Description: Access is denied. HTTP Error 500 - Server Error. Internet Information Services (IIS) Any ideas, nothing revealings in logs (other than 500 errors), this is pretty much all of I have to work with. The script has read and execute privileged for the internet guest account; and, I've added read/execute privileges to the whole D:\PHP. I followed this tutorial http://learn.iis.net/page.aspx/247/using-fastcgi-to-host-php-applications-on-iis-60/ to set it up. The only major diversion is I installed PHP to D:\PHP

    Read the article

  • Good book for a software developer doing part-time (Linux) system administration work

    - by Tony Meyer
    In many smaller organisations, developers often end up doing some system administration work (for obvious reasons). A lot of the time, they have great developer skills, but few system administration skills (perhaps all self-taught), and so have to learn as they go, which is fairly inefficient. Are there canonical (or simply great) books that would help in this situation? More advanced than just using a shell (presumably a developer can do that), but not aimed at someone that hopes to spend many years doing this work. Ideally, something fairly generic (although specific to a distribution would be OK), covering databases, networking, general maintenance, etc, not just one specific task. For the most part, I'm interested in shell-based work (i.e. no GUI installed), although if there's something outstanding I'm missing, please point it out. (As an analogy, replace "system administration" with C, and I'd want K&R, with C++ and I'd want Meyers' "Effective C++").

    Read the article

  • "Recursive" Wildcard DNS for Amazon Route 53

    - by Brian
    The title of the question might be misleading because I'm not an expert and I'm trying to learn the proper terminology. That being said, I'm wondering if it's possible to setup a wildcard DNS record for any number of dot separation in domain names and have them all point to the network root. This is for WordPress multisite, users will have the option of choosing a mapped domain name, I want to configure my DNS so that both mysite.co.uk.network.com and mysite.com.network.com are valid (I realize this is a but ugly, but WordPress multisite requires that each site have a unique site_url and I'd prefer to preserve the period-delimited appearance if it's possible).

    Read the article

  • IIS 7.5 FTP IIS Manager Users Login Fail (530)

    - by Jim
    IIS 7.5 FTP IIS Manager Users Login Fail (530) I'm trying to set up a FTP site on IIS 7.5 that allows IIS Manager Users to login. I'm following this guide: http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/. After set up, I cannot login to the FTP using an IIS Manager User account. The client error I got was 530 User cannot log in. Win32 error: Unspecified error. Error details: An error occured during the authentication process. I tried both with or without a virtual host. A Windows account login fine. The only strange thing I noticed was that when setting up Read permission for Network Service, there was an access denied error when setting up permission for "%SystemDrive%\Windows\System32\inetsrv\config\schema". Any thoughts? Thanks!

    Read the article

  • Is there a utility that displays hotkeys for the current application?

    - by Alwin
    To speed up my compyuter use I'm trying to use as many hotkeys as possible. But because I'm working in many applications it is really hard to remember all those shortcuts. I'm looking for a program that looks at what application is currently in use by me, and displays a list of possible hotkeys I want to use. Example: I'm writing a document in Word, and the utility program shows a list of hotkeys I could use in Word. With such a program I could learn the shortcut keys much faster. Does such a utility exist?

    Read the article

  • Reverse proxy with SSL and IP passthrough?

    - by Paul
    Turns out that the IP of a much-needed new website is blocked from inside our organization's network for reasons that will take weeks to fix. In the meantime, could we set up a reverse proxy on an Internet-based server which will forward SSL traffic and perhaps client IPs to the external site? Load will be light. No need to terminate SSL on the proxy. We may be able to poison DNS so original URL can work. How do I learn if I need URL rewriting? Squid/apache/nginx/something else? Setup would be fastest on Win 2000, but other OSes are OK if that would help. Simple and quick are good since it's a temporary solution. Thanks for your thoughts!

    Read the article

  • Do all Mac OS X applications require Admin permissions to 'install'?

    - by Andy
    I'm new to the whole Mac OS X operating system. I'm trying to learn and I've got myself a MacBook running Mac OS X 10.7.3. I've created a test user that can not administrate so that I can test out permissions and I've found that I can not do anything in the Applications folder, which includes 'installing' applications (even those drag 'n' drop ones) and creating folders, without entering an Admin name and password. However, I was under the impression that this wasn't the case and you only needed Admin permissions to write to somewhere like Preferences, so can somebody please clarify why it is asking for Admin when I try to drag 'n' drop applications into the Applications folder.

    Read the article

  • Feedback request: Linode for Magento hosting?

    - by Ernest
    Hello, i install and customize a self made application for web pages which uses spring+jstl and the admin uses flex. Also i want to add to my offers an ecommerce cms, so i have decided to start with magento. I'm using daily razor vps, however i was thinking in switching to linode because of the price. My questions are: 1.- Is linode good for magento ? 2.- is linode good for java+tomcat+jstl+mysql apps ? 3.- What are the most demanding resources to magento ? CPU ? RAM ? Does it consumes more if i have more products? Well i hope to learn from you, this page is always so helpful UPDATE: A final question: 4.- Do you recomend another vps service for my requieriments ?

    Read the article

  • Requiring SSH-key Login Via PAM From Specific IP Ranges

    - by Sean M
    I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config.

    Read the article

  • automator scripts - resources

    - by sagar
    In Leopard, on Finder - desktop, right click pop up menu has an option for automator scripts. In Snow Leopard - they have removed this option. More over, I would like to learn some automator scripts. What are the great resources for learning about automator & it's script ? Suppose, I want to create an automator for creating a tar.gz for selected files & folders. What should I do ? Thanks in advance for sharing your knowledge. Please add comment before down vote or close vote. Sagar.

    Read the article

  • Searching for a specific option in a man page

    - by mitch_feaster
    I often find myself man'ing a command just to learn about one specific option. Most of the time I can search to the option just fine, unless it's something like ffmpeg or gcc where I have to step through about 40 matches until I get to the actual description of the option... Sometimes I can get lucky and search for the word "options" to get close and then refine it from there, but it would be nice if I could reliably jump straight to the option in question. It would be cool if there was a tool that could parse out the options and build a database on which you could do searches, but after looking at the groff markup for a few pages I've determined it would only be a best-guess effort due to the lack of meta-information in groff markup... In my ideal world woman mode in emacs would support searching for specific options... :) Any tips for jumping straight to a specific option in a man page?

    Read the article

  • Check packet vlan tag using Tap virtual interface

    - by ankit
    Hi all, I am trying to learn how to implement virtual interfaces using the Tap driver. So far my understanding is that using the tap driver I can create a virtual interface and then have a userspace program attach to this interface to analyse the data coming into this device. Now what if I attach a cisco switch to my LAN interface using a TRUNK link, forward all the packets coming into the LAN interface to the virtual tap interface and then in my program attached to this interface do some coding to analyze the vlan tag in the packet and only allow certain vlans to be forwarded to the WAN interface ? Does this sound plausible or is there is flaw in my basic understanding ? Thanks for the help! ankit

    Read the article

  • Server Administration

    - by Kassem
    Hi everyone, My client asked me for a job description of a system administration because I might be assigned this position along with the other guy I'm working with. To be honest, I do not know much about a System Administrator's job but I'm willing to learn. Questions: What are the security requirements of a server? * What are the key responsibilities in a system admin's job description? What are some of the day to day tasks of a system admin? What is the average monthly salary of a system admin? Note: I will be working inside a Windows environment. But your replies do not necessarily need to be constricted to a Windows environment. (*) Other software I know will be required are: Windows Server 2008 IIS 7.0 MS SQL Server .NET 4.0 Runtime Let me know if there are other things I should be aware of as well. Thanks!

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >