Search Results

Search found 9083 results on 364 pages for 'startup scripts'.

Page 207/364 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • bridge to share WiFi internet connection over eth0

    - by rubo77
    In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

    Read the article

  • How do you persist installed software & configurations on an Amazon EC2 instance?

    - by Richard
    I've gotten a base Debian AMI up and running and now I need to know the best way to maintain it. I've ran the updates (aptitude update/upgrade) and installed/configured my software (Apache, Ruby, etc.) but if I reboot the instance or start a new one I'll have to do all this work over again. How do you persist these types of things over a reboot? Do you build a new AMI every time you adjust some tiny piece of the system? Or is there some way to feed it a script on startup that configures it in "real-time"? I know I could go all the way with a Reductive Labs Puppet style setup but that's a bit too much for my needs right now (1-2 servers). Any best practices on this? Update: I found a bit of information on using User-Data to run scripts at instance boot time.

    Read the article

  • which vista services can be disabled with impunity?

    - by GwenKillerby
    I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. thanks, Gwen.

    Read the article

  • Virtual OS using same Wallpaper as Host

    - by Jeff
    Greetings, I'm running a guest Linux OS on top of Windows XP, which rotates its wallpapers using the PowerToy Wallpaper Changer. I'm hoping for a way for my guest OS to somehow detect which wallpaper the host is using, and automatically switch to it. Why? Because if I run my guest OS in seamless mode and have transparent windows, I want the transparent background to match the host OS. It looks nice that way :). A couple tidbits of relevant information: Guest OS is Peppermint Ice (Ubuntu based) Host OS is Windows XP VirtualBox as virtualization software I realize this is somewhat breaking borders between the host and the guest, but I want my pretty rotating wallpaper! I'm guessing there is a way using scripts and shared folders or something similar, if not by means of just querying the host OS.

    Read the article

  • What useful things can one add to one's .bashrc?

    - by gyaresu
    Is there anything that you can't live without and will make my life SO much easier? Here are some that I use ('diskspace' & 'folders' are particularly handy). # some more ls aliases alias ll='ls -alh' alias la='ls -A' alias l='ls -CFlh' alias woo='fortune' alias lsd="ls -alF | grep /$" # This is GOLD for finding out what is taking so much space on your drives! alias diskspace="du -S | sort -n -r |more" # Command line mplayer movie watching for the win. alias mp="mplayer -fs" # Show me the size (sorted) of only the folders in this directory alias folders="find . -maxdepth 1 -type d -print | xargs du -sk | sort -rn" # This will keep you sane when you're about to smash the keyboard again. alias frak="fortune" # This is where you put your hand rolled scripts (remember to chmod them) PATH="$HOME/bin:$PATH"

    Read the article

  • Secure Apache PHP vhost configuration

    - by jsimmons
    I'm looking to secure some websites running under apache using suexec. At the moment php is executed with the user/group of the file being executed. This seems to me, not secure enough. It stops vhosts interfering with each other, but does not stop malicious code writing anywhere in the vhost being used. I was thinking that a possibility would be to run scripts as nobody/vhost group, that way the vhost user could still have full access to the vhost directories, but executing php would only be able to write to files with g+w, and to execute files with g+x. This I think should stop arbitrary writing in the web dir from compromised php. Just wondering if this is crazy, ridiculous, stupid? Of course this would be done on top of existing security measures.

    Read the article

  • cmd files to hta

    - by Frode Eskil
    I have a lot of cmd files i use daily for example to add users to local groups, installing printers, run as admin tasks etc. I like to take the scripts i use most frequently and add them to a tabbed hta file, but i have trouble finding a good guide on how to easily do it. Anyone having a good site to share with me? Or do i finally have to start with vb scripting? I have done some but it's so much faster to do a cmd file for me.

    Read the article

  • AD Stopping A script and Adding a Value to A User's Account Attribute

    - by Steven Maxon
    ‘This will launch the PPT in a GPO Dim ppt Set ppt = CreateObject("PowerPoint.Application") ppt.Visible = True ppt.Presentations.Open "C:\Scripts\Test.pptx" ‘This is the batch file at the end of the PPT that records the date, time, computer name and username echo "Logon Date:%date%,Logon Time:%time%,Computer Name:%computername%,User Name:%username%" \servertest\g$\Tracking\LOGON.TXT ‘This is what I need but can’t find: I need the script to check a value in the Active Directory user’s account in the Web page: attribute that would shut off the script if the user has already competed reading the presentation. Could be as simple as writing XXXX. I need the value XXXX written to the Active Directory user’s account in the Web page: attribute when they finish reading the presentation after they click on the bat file so the script will not run again when they log in. Thanks for any help.

    Read the article

  • Change Windows Service Priority

    - by SchlaWiener
    I have a windows service that needs to run with High Priority. At the end of the day I want to use this script to modify the priority after service startup: Const HIGH = 256 strComputer = "." strProcess = "BntCapi2.exe" Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") Set colProcesses = objWMIService.ExecQuery _ ("Select * from Win32_Process Where Name = '" & strProcess & "'") For Each objProcess in colProcesses objProcess.SetPriority(HIGH) Next But currently I am not able to change the priority, even with the taskmanger. The taskmananger throws an "Access Denied" error, but I am logged on as administrator and I changed the user account of the service to administrator, too. I still get the "access denied" message when trying to change the priority. Any ideas what permission I need to do that?

    Read the article

  • SSH connection falling down

    - by kappa
    I've set up a connection with autossh that creates some tunnels at system startup, but if I try to connect, after successful login (with RSA key) connection fall down, here a trace: debug1: Authentication succeeded (publickey). debug1: Remote connections from LOCALHOST:5006 forwarded to local address localhost:22 debug1: Remote connections from LOCALHOST:6006 forwarded to local address localhost:80 debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 5006, connect localhost:22 debug1: remote forward success for: listen 6006, connect localhost:80 debug1: All remote forwarding requests processed debug1: Sending environment. debug1: Sending env LANG = it_IT.UTF-8 debug1: Sending env LC_CTYPE = en_US.UTF-8 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Transferred: sent 2400, received 2312 bytes, in 1.3 seconds Bytes per second: sent 1904.2, received 1834.4 debug1: Exit status 1 What can be the problem? All this stuff is managed by a script already running on another machine (creating reverse tunnels on the same machine but with different ports)

    Read the article

  • Change permission to /proc/net/ip_conntrack on Ubuntu server 9.10

    - by bjarkef
    Hi I have a script that needs to extract certain information form the /proc/net/ip_conntrack file once in a while. I do not wish to run this script as the root user. Default permissions for the file is: $ ls -lah /proc/net/ip_conntrack -r--r----- 1 root root 0 2010-03-28 12:18 /proc/net/ip_conntrack I can change it with: sudo chmod o+r /proc/net/ip_conntrack But that does not stick after a reboot. Is there some configuration file for file-permissions in the /proc directory in Ubuntu Server 9.10? Or do I just have to stick a chmod line in some startup script?

    Read the article

  • MySQL service was shut down - why?

    - by Tony
    I have installed MySQL Server 5.5 on the WIndows Server 2008 R2. In the services.msc I see that it has the Startup Type option set to Automatic. Everything was fine until today when that service was somehow turned off, but I did not do this. So, 1) what can makes that service to be shutted down ? 2) Maybe is there any error log ? 3) Is it possible to set that service to be automatically turned on if that situation will come again ?

    Read the article

  • How to stop nginx on Mac OS 10.6.3

    - by Alex Kaushovik
    I've installed nginx server on my Mac from MacPorts: sudo port install nginx. Then I followed the recommendation from the port installation console and created the launchd startup item for nginx, then started the server. It works fine (after I renamed nginx.conf.example to nginx.conf and renamed mime.types.example to mime.types), but I couldn't stop it... I tried sudo nginx -s stop - this doesn't stop the server, I can still see "Welcome to nginx!" page in my browser on http://localhost, also I still see master and worker processes of nginx with ps -e | grep nginx. What is the best way to start/stop nginx on Mac? BTW, I've added "daemon off;" into nginx.conf - as recommended by various resources. Thank you.

    Read the article

  • SQL Server 2012 and SQLMail - will it still work?

    - by Kharlos Dominguez
    We are considering upgrading our SQL Server, which is currently running 2005. We use SQLMail heavily in the organization, both to send e-mails and to import some into a database. I've read on various places that SQLMail was deprecated and superseded by "Database Mail". I'm confused because this MS page: http://msdn.microsoft.com/en-us/library/bb402904.aspx seems to imply that it would still work? I understand the dangers of SQLMail but we do not have the resources to rewrite the scripts right now and would prefer to do it later on. Does SQLMail still work in 2012, and if not, how easy is it to replace with Database Mail, both for reading and sending e-mails?

    Read the article

  • Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

    - by Herb Caudill
    In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • I can't delete a file - even when using unlocker

    - by chipperyman573
    So I have a 64 bit windows 7 ultimate computer. On my desktop, I have a .iso file that should NOT be used by anything. However, when I use lockhunter (unlocker doesn't work for me), it says it can't unlock or delete it. When I check what it's being used by, it says by the system. Here's a picture when I click delete: Here's a picture of when I click unlock it: When I click Other Close locking process: I've had this file on my computer for a LONG time now and haven't been able to delete it. I've also tried eraser erase on startup, but that doesn't work, either. How can I remove this file?

    Read the article

  • Snow Leopard Hangs at Login Window

    - by jessecurry
    I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

    Read the article

  • How do I run strace or ltrace on Tomcat Catalina?

    - by flashnode
    Running ltrace isn't trivial. This RHEL 5.3 system has based on a Tomcat Catalina (servlet container) which uses text scripts to tie everything together. When I tried to find an executable here's the rabbit hole I went down: /etc/init.d/pki-ca9 calls dtomcat5-pki-ca9 ]# Path to the tomcat launch script (direct don't use wrapper) TOMCAT_SCRIPT=/usr/bin/dtomcat5-pki-ca9 /usr/bin/dtomcat5-pki-ca9 calls a watchdog program /usr/bin/nuxwdog -f $FNAME I replaced nuxwdog with a wrapper [root@qantas]# cat /usr/bin/nuxwdog #!/bin/bash ltrace -e open -o /tmp/ltrace.$(date +%s) /usr/bin/nuxwdog.bak $@ [root@qantas]# service pki-ca9 start Starting pki-ca9: [ OK ] [root@qantas]# cat /tmp/ltrace.1295036985 +++ exited (status 1) +++ This is ugly. How do I run strace or ltrace in tomcat?

    Read the article

  • How useful is mounting /tmp noexec?

    - by Novelocrat
    Many people (including the Securing Debian Manual) recommend mounting /tmp with the noexec,nodev,nosuid set of options. This is generally presented as one element of a 'defense-in-depth' strategy, by preventing the escalation of an attack that lets someone write a file, or an attack by a user with a legitimate account but no other writable space. Over time, however, I've encountered arguments (most prominently by Debian/Ubuntu Developer Colin Watson) that noexec is a useless measure, for a couple potential reasons: The user can run /lib/ld-linux.so <binary> in an attempt to get the same effect. The user can still run system-provided interpreters on scripts that can't be run directly Given these arguments, the potential need for more configuration (e.g. debconf likes an executable temporary directory), and the potential loss of convenience, is this a worthwhile security measure? What other holes do you know of that enable circumvention?

    Read the article

  • Run non-interactive script in single user mode

    - by Jed Daniels
    Is it possible to run a "startup" script when booting into single user mode? I need to be able to boot into single user mode, run my script, then reboot into multiuser mode without any human interaction. I've done a bunch of research and can't find anything that is clear on the topic, although of course I could replace something else that does run with a wrapper that also launches my script, but I'd prefer to do it in some official way. Ideally, the solution will work in FreeBSD 6 and up, but I'm willing to accept only new versions if it just doesn't exist in the older revs.

    Read the article

  • Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

    - by Latheesan Kanes
    I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

    Read the article

  • Delete temporary files from batch script in xp

    - by Keith Bentrup
    I'm looking for a good batch script that would quickly find & clean all the known safe temporary folders/files from Windows (as many variants as possible) machines (e.g. the windows temp folder, all users IE temp folders, etc.). I'm fond of UI tools like CCleaner (over Cleanmgr.exe), but when I'm trying to clean several computers quickly and/or with minimal involvement, it would be nice to have a script. Plus with a script, I could chain several scripts together. Maybe one to then fire up various antivirus and/or malware detectors. Anyone have a good one or can point to a good resource?

    Read the article

  • Load Testing Linux Virtual Server

    - by Anubhav Agarwal
    I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >