Search Results

Search found 8001 results on 321 pages for 'empty'.

Page 208/321 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

  • VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

    - by Richard
    I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

    Read the article

  • vsftp login errors 530 login incorrect

    - by mcktimo
    Using Ubuntu 10.04 on an aws ec2 instance. I was happy just using ssh but then a wordpress plugin needs ftp access...I just need ftp access for one site www.sitebuilt.net which is in /home/sitebuil. I installed a vftpd and pam and followed suggestions that got me to the following state /etc/vftpd.conf listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/vsftpd.log secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/private/vsftpd.pem guest_enable=YES user_sub_token=$USER local_root=/home/$USER chroot_local_user=YES hide_ids=YES check_shell=NO userlist_file=/etc/vsftpd_users /etc/pam.d/vsftpd # Standard behaviour for ftpd(8). auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed # Note: vsftpd handles anonymous logins on its own. Do not enable pam_ftp.so. # Standard pam includes @include common-account @include common-session @include common-auth auth required pam_shells.so # Customized login using htpasswd file auth required pam_pwdfile.so pwdfile /etc/vsftpd/passwd account required pam_permit.so session optional pam_keyinit.so force revoke auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so /etc/vsftpd_users sitebuil tim /etc/passwd ... sitebuil:x:1002:100:sitebuilt systems:/home/sitebuil:/bin/sh ftp:x:108:113:ftp daemon,,,:/srv/ftp:/sbin/nologin /etc/vsftpd/passwd sitebuil:Kzencryptedpwd /var/log/vftpd.log Wed Feb 29 15:15:48 2012 [pid 20084] CONNECT: Client "98.217.196.12" Wed Feb 29 15:16:02 2012 [pid 20083] [sitebuil] FAIL LOGIN: Client "98.217.196.12" Wed Feb 29 16:12:33 2012 [pid 20652] CONNECT: Client "98.217.196.12" Wed Feb 29 16:12:45 2012 [pid 20651] [sitebuil] FAIL LOGIN: Client "98.217.196.12"

    Read the article

  • Pasting formatted Excel range into Outlook message

    - by Steph
    Hi everyone, I am using Office 2007 and I would like to use VBA to paste a range of formatted Excel cells into an Outlook message and then mail the message. In the following code (that I lifted from various sources), it runs without error and then sends an empty message... the paste does not work. Can anyone see the problem and better yet, help with a solution? Thanks, -Steph Sub SendMessage(SubjectText As String, Importance As OlImportance) Dim objOutlook As Outlook.Application Dim objOutlookMsg As Outlook.MailItem Dim objOutlookRecip As Outlook.Recipient Dim objOutlookAttach As Outlook.Attachment Dim iAddr As Integer, Col As Integer, SendLink As Boolean 'Dim Doc As Word.Document, wdRn As Word.Range Dim Doc As Object, wdRn As Object ' Create the Outlook session. Set objOutlook = CreateObject("Outlook.Application") ' Create the message. Set objOutlookMsg = objOutlook.CreateItem(olMailItem) Set Doc = objOutlookMsg.GetInspector.WordEditor 'Set Doc = objOutlookMsg.ActiveInspector.WordEditor Set wdRn = Doc.Range wdRn.Paste Set objOutlookRecip = objOutlookMsg.Recipients.Add("[email protected]") objOutlookRecip.Type = 1 objOutlookMsg.Subject = SubjectText objOutlookMsg.Importance = Importance With objOutlookMsg For Each objOutlookRecip In .Recipients objOutlookRecip.Resolve ' Set the Subject, Body, and Importance of the message. '.Subject = "Coverage Requests" 'objDrafts.GetFromClipboard Next .Send End With Set objOutlookMsg = Nothing Set objOutlook = Nothing End Sub

    Read the article

  • How can I explain to dspam that the user "brandon" is the same as "brandon@mydomain"

    - by Brandon Craig Rhodes
    I am using dspam for spam filtering by running the "dspamd" daemon under Ubuntu 9.10 and then setting up a Postfix rule that says: smtpd_recipient_restrictions = ... check_client_access pcre:/etc/postfix/dspam_everything ... where that PCRE map looks like this: /./ FILTER lmtp:[127.0.0.1]:11124 This works well, and means that all users on my system get all of their email, whether "dspam" thinks it is innocent or not, and have the option of filtering on its decisions or ignoring them. The problem comes when I want to train dspam using my email archives. After reading about the "dspam" command, I tried this on the files in my Inbox and spam boxes (which date from when I was using another filtering solution): for file in Mail/Inbox/*; do cat $file | dspam --class=innocent --source=corpus; done for file in Mail/spam/*; do cat $file | dspam --class=spam --source=corpus; done The symptom I noticed after doing all of this was that dspam was horrible at classifying spam — it couldn't find any! The problem, when I tracked it down, was that I was training the user "brandon" with the above commands, but the incoming email was instead compared against the username "brandon@mydomain", so it was running against a completely empty training database! So, what can I do to make the above commands actually train my fully-qualified email address rather than my bare username? I would like to avoid having to run "dspam" as root with a "--user" option. I would have expected that the "dspam" configuration files would have had an "append_domain" attribute or something with which to decorate local usernames with an appropriate email domain, but I can't find any such thing. When I used to use the Berkeley DB backend to "dspam", I solved this problem by creating a symlink from one of the databases to the other. :-) But that solution eventually died because the BDB backend is not thread-safe, so now I have moved to the PostgreSQL back-end and need a way to solve the problem there. And, no, the table where it keeps usernames has a UNIQUE constraint that prevents me from listing both usernames as mapping to the same ID. :-)

    Read the article

  • cygwin sshd times out for remote login

    - by reve_etrange
    I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

    Read the article

  • Run FTP session from bash script

    - by Adam Salkin
    I'm trying to write a BASH script to test if an FTP site that I own is running. I therefore want the bash script to connect to the FTP site, log in with a dummy account and redirect the output to a file that I can then grep to confirm that the login succeeded. (I know that putting user/pass in a file is not recommended, but this dummy account is chrooted to one empty directory and can't escape to the shell, and in any case I'm the only user who can login to a shell prompt.) I'm using the BASH shell on Ubuntu. I created a file called "ftp-dummy" which looks like this username password And I then did this from the prompt: adam$ ftp my.ftpsite.com < ftp-dummy This does not work - I don't see the normal welcome message and the output is: Password:Name (my.ftpsite.com:adam) : I tried removing the space between the < and the filename - same result. If I redirect the output to a testfile, the testfile shows: Name (my.ftpsite.com:adam): ?Invalid command And I still get a Password prompt on STDOUT I also tried using echo and get the same result: echo -e "username \npassword \n" | ftp my.ftpsite.com I don't see why I'm not seeing the normal welcome message or why the input is not being read from the file. Any help would be much appreciated. Thanks, Adam

    Read the article

  • Wiping Deleted Directory Entries and Defragmenting Directories

    - by Synetech inc.
    Hi, I have seen plenty of apps that wipe free space on a disk (usually by creating a file that is as big as the remaining space) or defragment a file (usually by using the MoveFile API to copy it to a new contiguous area). What I have not seen however is a program that wipes the deleted directory entries. That is, when a file is deleted, its information (name, dates, etc.) remain in the directory, but are simply marked as empty. That leaves all kinds of information in a directory entry, and also wastes space since (at least on FAT drives), the directory may be using several clusters. For example, if a directory once had a lot of files, it will be expanded to use another cluster which could be anywhere on the disk. This means that the directory is fragmented, and may be using more clusters than needed, possibly with 100’s of unused (ie, “deleted file”) entries between active files. Does anyone know of a program that can defragment/consolidate directories (ie, wipe unused entries, and move active entries together)? (I would really rather not have to resort to writing my own yet again.) Thanks a lot. EDIT Sorry, I should have said, Windows and/or DOS, for FAT*/NTFS.

    Read the article

  • Windows Media Player 12 Library import keeps dying

    - by duckworth
    I cannot get WMP 12 to import my library. I have searched around various forums and tried all the common solutions like disabling Media Sharing, deleted my %LOCALAPPDATA%\Microsoft\Media Player directory and tried reimporting, etc. but nothing works. I have even removed the Media features from Windows setup and re-added them. I have a large mp3 collection shared on the network from another Windows box. I add the folder (tried as a mapped drive and UNC path) and it begins importing. After about 30 minutes into the import (the CurrentDatabase_372.wmdb hits just under 400MB) my WMP player stops importing and all of the icons in WMP turn to red x's and my library is gone. I close and reopen WMP 12 and the library is empty and the CurrentDatabase_372.wmdb is small and it strarts importing again. Rinse, lather, repeat. I am going nuts as WMP11 on Vista handles this same setup perfectly. I am at my wits end on what else to try. I am running a legit Windows 7 Ultimate X64 RTM install. Here is a screenshot of what WMP12 looks like when the import dies: Any other ideas? Edit: OK, I Just confirmed this is definitely a problem not specific to my computer or configuration. I just did a clean installation of Windows 7 Ultimate x86 on an old test machine, opened WMP12 and added the same network folder of mp3's and it crashed about an hour into the import with the same appearance as the screenshot I posted above and the library disappears. So the problem has to be one of several things: The large size of the library The fact that the library is on the network A specific file or file is causing it the player to crash

    Read the article

  • How can I get the root account to generate an acceptable ssh key?

    - by Jamie
    On an ubuntu machine I did the following: ~$ sudo su - [sudo] password for jamie: root@mydomain:~# ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: 12:34:56:78:9a:bc:de:f0:12:34:56:78:9a:bc:de:f0 [email protected] The key's randomart image is: +--[ RSA 2048]----+ | | | | | | | | | | | | | | | | | | +-----------------+ root@mydomain:~# cat /root/.ssh/id_rsa.pub | ssh -p 443 [email protected] 'cat > authorized_keys' [email protected]'s password: root@mydomain:~# ssh -p 443 [email protected] [email protected]'s password: It's asking me for a password. However, using a regular account, the following works: $ cd ; ssh-keygen -t rsa ; cat ~/.ssh/id_rsa.pub | ssh [email protected] 'cat >> ~/.ssh/authorized_keys' $ ssh [email protected] Last login: Thu Oct 24 14:48:41 2013 from 173.45.232.105 [[email protected] ~]$ Which leads me to believe it's not an issue of authorized_keys versus authorized_keys2 or permissions. Why does the 'root' account accessing the remote 'jamie' account not work? The remote machine is CentOS if that's relevant.

    Read the article

  • Active Directory FRS problems. 13508 error and other problems

    - by ITPIP
    I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

    Read the article

  • Unusual Caching Issue with IE 7/8 and IIS 7

    - by Daniel A. White
    We recently moved a site into production running Server 2008 x64 and IIS 7. The ASP.NET pages apparently load just fine, but when it comes to IE 7 and 8, a weird caching issue has cropped up with the CSS and JavaScript files on the page. On a very sporadic schedule, IE does not get all the files necessary to compose the page (i.e. CSS and JS files). When I manually go to the missing files from the address bar, they come back from local cache as empty. I F5 these source files and magically they come down properly. I refresh the site after loading a few files and the cache seems to hold. This problem has only been reproduced (again, sporadically) on IE 7 and 8 running XP. Chrome and Firefox appear to be immune. We have set IIS to use server-side kernel caching for CSS, JS and images. We also have set to expire content for the App_Themes and Scripts directories to expire immediately. One initial thought it was a SWF loading an FLV on page load. These fixes have not remedied the problem. We had no problems on our staging server which is using Server 2003 and IIS 6. Any ideas would be greatly appreciated. P.S. It sounds similar to this problem: but we do have the Static Content module installed. http://serverfault.com/questions/115099/iis-content-length-0-for-css-javascript-and-images

    Read the article

  • OS X AFP shares and access

    - by gbrandt
    I am running 10.5.6 Client as a mini server and am having problems with AFP shares. All clients are OS X 10.5.7 I have created three users for 'File Sharing' only on the 'server'. I have created groups and placed these users into specific groups. I have created ACL's to give each group access to certain shares. Two of those users can read and write to any share, one user cannot write to the shares, with different results: when copying a directory, only the directory is created, no files inside are copied, the OS does not give any errors when copying a single file I get three dialogs: "You may need to enter the name and password for an administrator on this computer to change the item named 'xxxx', "The item 'xxxxx' contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?, and, The operation cannot be completed because you do not have sufficient priveleges for some of the items. With the single file, a file gets created on the server, but is empty. My ACL for the group this user belongs to is: 0: group:projectmembers allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 1: group:informationtechnology inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 2: group:executive inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 3: group:everyone inherited deny list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit User 1 & 2 belong to informationtechnology and executive and projectmembers, they can read and write freely on the share. User 3 belongs to projectmembers and cannot read and write freely. I have read that this is a UID issue, however User 1 & 2 do not have matching UID's across clients and server and they work, so I don't think this is the case. Any ideas?

    Read the article

  • Files not being copied to AFP volume when copying through the Finder

    - by cefstat
    I am trying to copy files from my Macbook's hard disk to my NAS. The latter is a ReadyNAS Duo and is mounted as an AFP volume. The files are about 5MB each and I copy them by selecting in a Finder window all the files that I need and then dropping them onto the destination directory. Almost always some of the files do not get copied to the NAS. For example, if I select 200 files and then start the copying, everything looks at the beginning normal (while the copying takes place the Finder window for the destination directory is updated to show 200 files while it was empty before), but after the copying ends the destination directory shows less than 200 files (let's say 190). If I copy again the same 200 files to the NAS, without replacing already copied files, the remaining 10 files are usually copied correctly. In a few cases, I have to repeat the process a third time. Notice that the Finder does not give any warning that some of the files have not been copied at any stage. I am wondering if this a known problem with AFP and the Finder and/or if there is something that I can do to solve this problem.

    Read the article

  • nVidia performance with newer X and newer driver abysmal with Compiz

    - by Nakedible
    I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem.

    Read the article

  • Fedora 17 - Dropping into debug shell after attempted partitioning

    - by i.h4d35
    So I tried creating a new partition on Fedora 17 using fdisk as follows: Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (2048-823215039, default 2048): Using default value 2048 Last cylinder or +size or +sizeM or +sizeK (1-9039, default 9039): +15G Once this was done,instead of formatting the partition I created, I ran the partprobe command to write the changes to the partition table. On rebooting the computer, it drops to the debug shell and gives me the error as follows: dracut warning:unable to process initqueue dracut warning:/dev/disk/by-uuid/vg_mymachine does not exist dropping to debug shell dracut:/# While trying to run fsck on the said partition from the debug shell, it says "etc/fstab not found" and inside /etc I see a fstab.empty file. Is it now possible to retrieve what I have from the computer? Any help would be appreciated. Thanks in advance Edit: I've also tried the following steps for additional troubleshooting: I tried to boot using the Fedora disk and tried the rescue mode - says no Linux partition detected. I tried to create an fstab file by combining the entries from blkid and the /etc/mtab file and using the UUIDs from the mtab file - It didn't work. As soon as I rebooted the machine, it promptly dropped me in to the debug shell and the fstab file which i created wansn't there anymore in /etc (part of this solution)

    Read the article

  • How do I install the main repositories for RHEL6

    - by eisaacson
    We've setup RHEL6 on a new server. As far as we can tell, our subscription is all setup properly. However, when I run yum repolist, it doesn't show any repositories. /etc/yum.repos.d/redhat.repo is empty. I tried pasting in the content from another RHEL6 server's redhat.repo but as soon as I run yum, it wipes it out again. I just need to get the basic RedHat repositories setup so I can install packages. EDIT: Using the GUI, I went to System Administration Red Hat Subscription Manager. Under the 'Products' tab, it did not show any products. EDIT: When I run yum update, here's what I get: # yum update Loaded plugins: product-id, refresh-packagekit, security, subscription-manager This system is receiving updates from Red Hat Subscription Management. Setting up Update Process No Packages marked for Update When I log in to RedHat customer portal, it shows that subscription as active. EDIT: To make sure I wasn't having a subscription issue. I re-registered and re-subscribed. I get all the same results. # subscription-manager register --force # subscription-manager subscribe --pool=*redacted* EDIT: contents of /etc/yum.conf [main] cachedir=/var/cache/yum/$basearch/$releasever keepcache=0 debuglevel=2 logfile=/var/log/yum.log exactarch=1 obsoletes=1 gpgcheck=1 plugins=1 installonly_limit=3 contents of /etc/yum/pluginconf.d/rhnplugin.conf: [main] enabled = 0 gpgcheck = 1

    Read the article

  • Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

    - by David Osborn
    I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

    Read the article

  • Google Chrome - Issues with download dialogs using BinaryWrite

    - by Mila
    Hello, I have an empty ASP .NET page with the code behind to support downloading of PDF files. The page is called from a link-like web control that has NavigateUrl set to this page. In short, I am using the following for streaming: Response.Buffer = false; Response.ClearHeaders(); Response.ContentType = "application/x-pdf"; Response.AddHeader("Content-Disposition","attachment; filename="MyPDFFile.pdf"); byte[] binary = (dataReaderRemote[DataPDFFieldName]) as byte[]; //dataReaderRemote[DataPDFFieldName] has previously retrieved data if (binary != null) { MemoryStream memoryStream = new MemoryStream(binary); int sizeToWrite = CHUNKSIZE; //CHUNKSIZE=1024 for (int i = 0; i < binary.GetUpperBound(0) - 1; i = i + CHUNKSIZE) { if (!Response.IsClientConnected) return; if (i + CHUNKSIZE >= binary.Length) sizeToWrite = binary.Length - i; byte[] chunk = new byte[sizeToWrite]; memoryStream.Read(chunk, 0, sizeToWrite); Response.BinaryWrite(chunk); Response.Flush(); } } Response.Close(); IE as well as Firefox bring the download prompt window asking you whether you wish to open or save the file, while the user remains on the same page containing the link. However, Google Chrome opens a new blank tab and downloads the file automatically. Is there any way to prevent Chrome from opening the extra blank and therefore useless tab? I am using the Google Chrome version 5.0.375.55 (Official Build 47796) on Windows XP. Thanks in advance! Mila

    Read the article

  • SQL Server restore a backup results in an error.

    - by Mario
    I have a database in dev (SQL Server 2005 on Windows Server 2008) that I need to move to prod (SQL Server 2000 on Windows Server 2003). My process is as follows: Login to dev, open SQL Server Management Studio Right click on the database | Tasks | Backup. Keep all default options (full backup etc.) Move .bak file locally to prod (no network drive), login to prod, open SQL Server Enterprise Manager. Right click Databases node | All Tasks | Restore database. Change Restore as database to reflect the same database name. Click radio button 'From device'. Click 'Select Devices' Click Restore from: Add..., browse to .bak file (small - only 6mb) Now I am ready to restore the database, so I click OK and get the following error: "The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE DATABASE is terminating abnormally." This error is immediate. I have tried a few different variations of this - restoring the db to dev machine with a different db name and log file names (where it originated), creating an empty database with the same physical path to files before and trying to restore to that, making a few different .bak files and making sure they are verified before uploading them to prod. I know for a fact the directory for the .mdf and .ldf files exist on prod, though the files themselves don't exist. If, before I click OK to restore, go to the options tab instead I get the following error: Error 3241: The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE FILELIST is terminating abnormally. Anyone have any bright ideas?

    Read the article

  • How Could My Website Be Hacked

    - by Kiewic
    Hi! I wonder how this could happen. Someone delete my index.php files from all my domains and puts his own index.php files with the next message: Hacked by Z4i0n - Fatal Error - 2009 [Fatal Error Group Br] Site desfigurado por Z4i0n Somos: Elemento_pcx - s4r4d0 - Z4i0n - Belive Gr33tz: W4n73d - M4v3rick - Observing - MLK - l3nd4 - Soul_Fly 2009 My domain has many subdomains, but only the subdomains that can be accessed with an specific user were hacked, the rest weren't affected. I assumed that someone entered through SSH, because some of these subdomains are empty and Google doesn't know about them. But I checked the access log using the last command, but this didn't show any activity through SSH or FTP the day of the attack neither seven days before. Does anybody has an idea? I already changed my passwords. What do you recommend me to do? UPDATE My website is hosted at Dreamhost. I suppose they have the latest patches installed. But, while I was looking how they entered to my server, I found weird things. In one of my subdomains, there were many scripts for execute commands on the server, upload files, send mass emails and display compromising information. These files had been created since last December!! I have deleted those files and I'm looking for more malicious files. Maybe the security hold is an old and forgotten PHP application. This application has a file upload form protected by a password system based on sessions. One of the malicious scripts was in the uploads directory. This doesn't seem like an SQL Injection attack. Thanks for your help.

    Read the article

  • ssh keys rejected each day

    - by EddyR
    I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

    Read the article

  • simple network between xp & 7 with cross cable problem...

    - by LostLord
    hi my dear friends : i have a simple network between xp & 7 windowses with cross cable (2 pc home)... ===================================================================== the one with 7 is mother and have 2 lan device (onboard + pci) A. onboard is like this when u go to tcp/ip v4 properties:(4 adsl internet) obtain an ip... preferred dns server : 81.91.129.67 alternate dns server : 4.2.2.4 shared...no permission 4 change so every thing is ok for internet on windows 7. B. the other lan pci card that is connected to pc with xp is like this : 192.168.2.11 255.255.255.0 0.0.0.0 empty empry computer name : cougar workgroup : nethome homeNetwork is disabled (i think that is 4 2 pc's with 7 os not xp) every thing is off in network options except file & printer sharing in public area ===================================================================== pc with xp os is like this : 192.168.2.12 255.255.255.0 192.168.2.11 (mean gateway) 4.2.2.4 8.8.8.8 computer name : tiger workgroup : nethome ===================================================================== at last my little net is ok... mean both have internet , both can see each other by their ip (\\192.168.2.11 or \\192.168.2.12) my problem is when in pc with xp type \\cougar it shows an error about network path! but in pc with 7 \\tiger works perfec. what is the problem in system with xp ? in few days ago this network was ok (search by computer name) when both os were xp , so there is no problem with my cable or devices. another problem is i can not find tiger in my network list in 7 pc \ why? is something wrong with my network? thanks 4 future advance best regards

    Read the article

  • Why Is ModSecurity Unable to Access the Data Directory?

    - by tommytwoeyes
    Update I think we've solved this; the problem appears to have been a result of the /modsec_storage directory having an incorrect value for its SELinux context type. However, we're still not sure, because although after I changed the SELinux context type value, Apache was able to create files in that directory for the global and ip collections (global.dir/global.pag and ip.dir/ip.pag), the new files still have zero bytes. I'm new to ModSecurity and am not sure if the files are empty because something is wrong with the configuration or if ModSecurity has simply determined it doesn't need to store IP addresses persistently after each transaction ends. Anyone able to offer guidance here? I've recently installed ModSecurity (v2.5.12 / CRS v2.0.8) on our production server, and everything works great, except for these errors that it keeps writing to the Apache error log: Failed to access DBM file "/modsec_storage/global": Permission denied [hostname "www.internationalstudent.com"] [uri "/includes/soc_bookmarks/images/delicious.png"] [unique_id "LZ6jc38AAAEAAFO6408AAABO"] Failed to access DBM file "/modsec_storage/ip": Permission denied [hostname "www.internationalstudent.com"] [uri "/includes/soc_bookmarks/images/delicious.png"] [unique_id "LZ6jc38AAAEAAFO6408AAABO"] After following the instructions for file permission settings in the ModSecurity handbook by Ivan Ristic, with no success, I created a /modsec_storage directory, set the owner & group to apache, and set the permissions for the directory recursively to 777. However, ModSecurity is still reporting the same permission errors, so I am stumped. Can anyone tell me how to fix this?

    Read the article

  • Data recovery on a corrupted 3TB disk

    - by Mark K Cowan
    Short version I probably need software to run a deep-scan recovery (ideally on Linux) to find files on NTFS filesystem. The file data is intact, but the references are no longer present. Analogous to recovering data from a "quick-formatted" partition. Hopefully there is a smarter way available than deep-scan, one which would recover filenames and possibly paths. Long version I have a 3TB disk containing a load of backups. Windows 7 SP1 refused to detect the disk when plugged in directly via SATA, so I put it on a USB/SATA adaptor which seemed to work at first. The SATA/USB adaptor probably does not support disks over 2.2TB though. Windows first asked me if I wanted to 'format' the disk, then later showed me most of the contents but some folder were inaccessible. I stupidly decided to run a CHKDSK on my backup disk, which made the folders accessible but also left them empty. I connected this disk via SATA to my main PC (Arch Linux). I tried: testdisk ntfsundelete ntfsfix --no-action (to look for diagnostically relevant faults, disk was "OK" though) to no avail as the files references in the tables had presumably been zeroed out by CHKDSK, rather than using a typical journal'd deletion). If it is useful at all, a majority of the files that I want to recover are JPEG, Photoshop PSD, and MPEG-3/MPEG-4/AVI/MKV files. If worst comes to worst, I'll just design my own sector scanner and use some simple heuristic-driven analysis to recover raw binary blocks of data from the disk which appears to match the structures of the above file types. I am unfamiliar with the exact workings of NTFS but used to be proficient at recovering FAT32 systems with just a hex-editor, so I can provide any useful diagnostic information if you let me know how to find it! My priorities in ascending order of importance for choosing the accepted answer: Restores directory structure Recovers many filenames in addition to the file data Is free / very cheap Runs on Linux Recovers a majority of file data The last point is the most important, but the more of the higher points you match the more rep you'll probably get :)

    Read the article

  • can't Remote desktop to windows XP, blaming the server side

    - by Jin
    After rebooting my work PC (windows XP sp3) this Wednesday (thank to Microsoft Tuesday), I found that I can't remote desktop to my work PC from home (with VPN to company). I have been remote-desktop to work for years and I am really surprised since connectivity is not the problem, so I brought up wireshark to sniff the packets. I can see after TCP handshake, client sent X.224 Connection Request 03 00 00 13 0e e0 00 00 00 00 00 01 00 08 00 03 00 00 00 server sent X.224 Connection Confirm. 03 00 00 0b 06 d0 00 00 12 34 00 According to "MS-RDPBCGR", the official spec on RDP, the server should include Negotiation Response in the "Connection Confirm" message but it didn't. It's empty. I googled a lot but didn't find any clue on why server did that. By the way, I used the same remote desktop client and can connect to other windows XP PC. Here are a couple of pieces of information that may help to give a clue: Since TCP handshake (server port being 3389), I believe the svchost service is actually running. going to control panel -- system window, --- "Remote" tab, the remote desktop is indeeded checked and it states that my username is allowed. according to the packet capture, client didn't even get a chance to tell server what user was trying to logon. Yes, the progress bar showed up a few seconds and then it went back to the "Remote desktop Connection" window again. Searched "windowsupdate.log", didn't find any appearance of the word "remote".

    Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >