Search Results

Search found 11972 results on 479 pages for 'writing'.

Page 209/479 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

  • Which iPhone ad API has produced the highest revenue for you?

    - by Kyle Humfeld
    This isn't a technical question, but more of a request for advice and empirical/anecdotal data. I'm nearly done writing a free app for iPhone, and I'm at the stage where I'm going to put ads into the app. I've had mixed success in the past with iAd (their fill rates have been atrocious recently, and their payouts have cut by about 75% over the past 4 months or so), and would like to know how much ad revenue you, the community, has seen from the various ad APIs you've used for your iPhone apps. This isn't a request for opinion, i.e. which is 'better', only what kinds of numbers you're seeing. I don't need absolute figures, but 'iAd pays x% higher than AdMob, and y% lower than AdSense' would be extremely helpful to me as I make my decision as to which ad API to integrate into my App. Also, have you had any experience or success with integrating multiple ad APIs into the same app? That's something I'm considering doing in my current iAd-filled apps (particularly my iPad app, which has yet to receive a single impression after nearly 60,000 requests)... something like: 1) Request-from-iAd 2) if that fails, request-from-adSense 3) if that fails, request-from-adMob 4) if that fails, ... etc.

    Read the article

  • Which iPhone ad API has produced the highest revenue for you?

    - by Kyle Humfeld
    This isn't a technical question, but more of a request for advice and empirical/anecdotal data. I'm nearly done writing a free app for iPhone, and I'm at the stage where I'm going to put ads into the app. I've had mixed success in the past with iAd (their fill rates have been atrocious recently, and their payouts have cut by about 75% over the past 4 months or so), and would like to know how much ad revenue you, the community, has seen from the various ad APIs you've used for your iPhone apps. This isn't a request for opinion, i.e. which is 'better', only what kinds of numbers you're seeing. I don't need absolute figures, but 'iAd pays x% higher than AdMob, and y% lower than AdSense' would be extremely helpful to me as I make my decision as to which ad API to integrate into my App. Also, have you had any experience or success with integrating multiple ad APIs into the same app? That's something I'm considering doing in my current iAd-filled apps (particularly my iPad app, which has yet to receive a single impression after nearly 60,000 requests)... something like: 1) Request-from-iAd 2) if that fails, request-from-adSense 3) if that fails, request-from-adMob 4) if that fails, ... etc.

    Read the article

  • Are programmers a bunch of heartless robots who are lacking of empathy? [closed]

    - by Graviton
    OK, the provocative title got your attention. My experience as a programmer and dealing with my fellow programmers is that, a programmer is also usually someone who is so consumed by his programming work, so absorbed in his algorithmic construction that he has little passion/ time left for anything else, which includes empathy for other people, love and care for the people whom he love or should love ( such as their spouses, parents, kids, colleagues etc). The better a person is in terms of his programming powers, the more defective he is in terms of love/care because both honing programming skills and loving the surrounding takes time and one has only so much time to be allocated among so many different things. Also, programming ( especially INTERESTING programming job, like, writing an AI to predict the future search trend) is a highly consuming job; it doesn't just consume you from 9 to 5, it will also consume you after 5 and practically every second of your waking hours because a good programmer can't just magically switch off his thinking hat after the office lights go off ( If you can then I don't really think you are a passionate programmer, and the prerequisite of a good programmer is passion). So, a good programmer is necessarily someone who can't love as much as others do because the very nature of the programming job prevents him from loving others as much as he wants to. Do you concur with my observation/ reasoning?

    Read the article

  • CodePlex Daily Summary for Friday, September 14, 2012

    CodePlex Daily Summary for Friday, September 14, 2012Popular ReleasesSOAP Test Application (with EWS Tools): v0.60: Template modifications (to delete blank fields where they are not required). Bugfix for listener form where it wouldn't allow the program to be closed under certain conditions.BizTalk Zombie Management: BizTalkZombieManagement V0.1.0: First version Function supported : Listener on zombie event Dump the zombie message in folderTumblen3: tumblen3 Version14Sep2012: added 'proxy-getter' of tumblr's OAuth Access TokenIBR.StringResourceBuilder: V1.3 Release 2 Build 13: Fixed: "Making" a string resource left the table of string literals blank (due to "improvement" in Build 11). Improved: Sped up inserting resource call when "making" a string resource. from Build 12 New: Option to store all string resources in one resource file global to the project.Fruit Juice: Fruit Juice v1.0: First versionPDF Viewer Web part: PDF Viewer Web Part: PDF Viewer Web PartMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.67: Fix issue #18629 - incorrectly handling null characters in string literals and not throwing an error when outside string literals. update for Issue #18600 - forgot to make the ///#DEBUG= directive also set a known-global for the given debug namespace. removed the kill-switch for disregarding preprocessor define-comments (///#IF and the like) and created a separate CodeSettings.IgnorePreprocessorDefines property for those who really need to turn that off. Some people had been setting -kil...Active Forums for DotNetNuke CMS: Active Forums 05.00.00 RC3: Active Forums 05.00.00 RC3Lakana - WPF Framework: Lakana V2: Lakana V2 contains : - Lakana WPF Forms (with sample project) - Lakana WPF Navigation (with sample project)Microsoft SQL Server Product Samples: Database: OData QueryFeed workflow activity: The OData QueryFeed sample activity shows how to create a workflow activity that consumes an OData resource, and renders entity properties in a Microsoft Excel 2010 worksheet or Microsoft Word 2010 document. Using the sample QueryFeed activity, you can consume any OData resource. The sample activity uses LINQ to project OData metadata into activity designer expression items. By setting activity expressions, a fully qualified OData query string is constructed consisting of Resource, Filter, Or...Arduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the visualmicro.com forum for more news and updates Version 1209.10 includes support for VS2012 and minor fixes for the Arduino debugger beta test team. Version 1208.19 is considered stable for visual studio 2010 and 2008. If you are upgrading from an older release of Visual Micro and encounter a problem then uninstall "Visual Micro for Arduino" using "Control Panel>Add and Remove Programs" and then run the install again. Key Features of 1209.10 Support for Visual Studio 2...Social Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter New feature - Set a property's DefaultValueHandling to Ignore when EmitDefaultValue from DataMemberAttribute is false Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing deci...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...New Projects$linq - A Javascript LINQ library: $linq is a Javascript version of .NET's Linq to Objects, with some query operations inspired by MoreLinq (an extension to Linq to Objects).AIlin: Some math operations with sparse and full matrices, elliptic curves and big numbersCapMvcHospital: Proyecto Hospital MVC para ABM de consultas clínicas y DoctoresChris on SharePoint Solutions: A collection of handy SharePoint solutions to make life easier for Site and Farm administrators.COTFACIL: O projeto visa estudar a integração web, mysql e visual studio 2010, para o estudo e conhecimento geral.Custom People Picker: The custom control which inherits the property of the "People Picker" control to display the items from the list.Data Sampler: The library allows the developer to quickly create dummy data or it can also be used to save a set of data that was originally retrieved from the database.DevelopEnvironment: ????????DotNetNuke Search Engine Sitemaps Provider: The iFinity DotNetNuke Search Engine Sitemaps Provider project generates Search Engine Sitemaps for DotNetNuke installs.Gapper Game: This is a recreation of the GAPPER DOS game that was released in 1986. The original has been abandon, so the Eastern Idaho .Net Users Group is remaking it.GestAdh45: Logiciel de gestion d'une association sportive : - gestion des adhérents/inscriptions - gestion des équipements (inventaire/vérifications)HP Printer Display Hack: A simple application that periodically checks the current price of a selected stock and sends it to the display of networked HP (and compatible) printers.INTELSI SAC: INICIOKnowledge Board Race: FATEC-SP - Engenharia de Software III KBR - Knowledge Board Race Desenvolvimento de um jogo educativo de tabuleiro on-line baseado em perguntas e respostas.MEDICALD PROJ: En este proyecto que lo haremos en equipo cada quien aportara su parte y luego la publicará aca.MVVM for Windows 8: Simple MVVM library for Windows 8.MyProjects: myprojectsNibbleOilWeb: Web Projectntcms: htcms system codingPowerConverter: PowerConverter allows you to change the old PE format to the new Power format for your PowerExtension programs.Primer Proyecto: dfrProject91404: pappapruebacodeplex: FooQuizz: D? án này là m?t ph?n c?a d? án t?t nghi?p. Vui lòng không s? d?ng vào m?c dích thuong m?i khi chua du?c s? d?ng ý c?a tác gi?.Runtime Dynamic Data Model Builder: Runtime Dynamic Data Model Builder lets you to have a Data Access Layer without writing code. It creates the database context and POCO based on Entity FrameworkSchoolProjectShitXD: Just a bunch of crap I am creating in my School,Scripture Reference Parser: Scripture Reference Parser is a library to parse data, including book, chapter, verse, and index, from references from various scriptures.Shadow: Shadow?????WCF??Remoting?ORM??,????????????????????。SharePoint Archive Tweets: Using REST, JSON and OAuth, SharePoint Archive Tweets (SPAT) was born. SPAT is a Microsoft SharePoint 2010 timer application that downloads Twitter timelines.Softech Portal - Vietnamese Portal: Gi?i pháp c?ng thông tin di?n t? thu?n Vi?t cho co quan hành chính Nhà Nu?c testdd09132012git01: sdtestdd09132012git02: ntestdd09132012hg01: dtestdd09132012tfs01: dteste tfs: testeTestRepository: Project Testing repository onlinetesttfs09132012tfs02: nThesis: This is my thesis project. It is about EDAs and Kernel classifiers. The source code is in Matlab.Tiny Contact Manager: Tiny Contact Manager manages collecting customer birthday and registration details and also sending out birthday vouchers.User Group Labs: My Groups: This is one of a series of social modules in the DotNetNuke User Group Labs project. This module allows you to easily lists the groups that a user is a part ofVatConnect: This is a Microsoft Flight Simulator add-on to connect it to the Vatsim network.Web Minesweeper with MVVM and Knockout: This is a common minesweeper game, that is implemented with mvvm in the web, only with html and javascipts libraries...Windows 8 - Using Roaming Storage in a Casual Game: This application demonstrates a simple game written for Windows 8 that illustrates how to utilize the Roaming Data Store for game data synchronization.xamlShow: This project is a demonstration of how to accomplish common tasks using WinRT XAML on Windows 8. This project is, basically, sample code used by Jerry Nixon.YTNet: YT Net is a small library which provides features for searching and downloading YouTube videos.

    Read the article

  • Implement Budget Allocation in DAX for Power Pivot and Tabular #powerpivot #tabular #ssas #dax

    - by Marco Russo (SQLBI)
    Comparing sales and budget, or costs and budget, is a very common operation. However, it is often the case that you have different granularities for different tables containing budget and the data to compare with. There are two ways to do that: you can limit the comparison to the granularity that is common to the two tables, or you can allocate the budget where it’s not defined. For example, if you have a budget defined by quarter and category, you might want to allocate it by month and product. In this way, you will do the comparison as you had a more granular definition of the budget, without actually having to do the manual job of allocating data (usually in an Excel worksheet!). If you want to do budget allocation in DAX, you can use the Budget Patterns we published on DAX Patterns. If you come from and MDX/OLAP background, at first you might find it hard to solve the problem of not having attribute hierarchies that helps you in propagating the budget values to lower hierarchical levels. However, I think that once you get used to DAX, you will find the behavior very predictable and easy to “debug” also for more complex allocation formula. You just have to be careful in writing the DAX formula, but probably the pattern we wrote should help you designing the right data model, without creating physical relationships to the budget table! This pattern is also based on the Handling Different Granularities scenario I discussed a couple of weeks ago.

    Read the article

  • Advice: The first-time interviewer's dilemna

    - by shan23
    I've been working in my first job for about 2 years now, and I've been "asked" to interview a potential teammate (whom I might have to mentor as well) on pretty short notice (2 days from now). Initially, I had been given a free rein(or so I thought, and hence agreed), but today, I've been told "not to pose bookish questions" - implying I can only ask basic programming puzzles and stuff similar to the 'fizbuzz' question. I strongly believe that not knowing basic algorithmic notations(the haziest ideas of space/time complexities) or the tiniest idea of regular expressions would make working with the guy very difficult for anyone. I know i'm asking for a lot here, but according to you, what would be a comprehensive way to test out the absolutely basic requirements of a CS guy(he has 2 yrs of exp) without sounding too pedantic/bookish etc ? It seems it would be legit to ask C questions/simple puzzles only....but I really do want to have something a bit different from "finding loops in linked lists" that has kind of become the opening statement of most techie interviews !! This is a face-to-face interview with about an hour or more of time - I looked at Steve's basic phone-screen questions, and I was wondering if there exists a guide on "basic face-to-face interview questions" that I can use(or compile from the community's answers here). EDIT: The position is mostly for a kernel level C programming job, with some smattering of C++ required for writing the test framework.

    Read the article

  • How do I express subtle relationships in my data?

    - by Chuck H
    "A" is related to "B" and "C". How do I show that "B" and "C" might, by this context, be related as well? Example: Here are a few headlines about a recent Broadway play: 1 - David Mamet's Glengarry Glen Ross, Starring Al Pacino, Opens on Broadway 2 - Al Pacino in 'Glengarry Glen Ross': What did the critics think? 3 - Al Pacino earns lackluster reviews for Broadway turn 4 - Theater Review: Glengarry Glen Ross Is Selling Its Stars Hard 5 - Glengarry Glen Ross; Hey, Who Killed the Klieg Lights? Problem: Running a fuzzy-string match over these records will establish some relationships, but not others, even though a human reader could pick them out from context in much larger datasets. How do I find the relationship that suggests #3 is related to #4? Both of them can be easily connected to #1, but not to each other. Is there a (Googlable) name for this kind of data or structure? What kind of algorithm am I looking for? Goal: Given 1,000 headlines, a system that automatically suggests that these 5 items are all probably about the same thing. To be honest, it's been so long since I've programmed I'm at a loss how to properly articulate this problem. (I don't know what I don't know, if that makes sense). This is a personal project and I'm writing it in Python. Thanks in advance for any help, advice, and pointers!

    Read the article

  • How to deal with colleagues refuse to follow practices?

    - by Adrian Shum
    I was discussing with another colleague about what we should be used when an DB entity is referring to another. I don't think there is any good reason to break the practice of putting the Primary Key in the referring entity. However, one of my colleague says: "You should use a surrogate key in the entity, but it is better to put the human-readable natural key in the referring entity. As long it is unique, it is fine and it is easier when you are doing support or maintenance job" I know it will works, but obviously it is not a good practice you are putting a non-PK unique column as "foreign key", just for gaining a bit of ease in writing SQL during support as we can have less table join. Though I mentioned the his approach is conceptual incorrect, and causing problem too practically etc, he seems rather trade off correctness in data model in exchange of ease of maintenance. And he said: "I know it is not good practice, but good practice is not golden rule" Honestly I feel frustrated when dealing with something like this. I know there are always case that we should break some rule or practice, but doubtless it is not such case now. What will you when you are facing situation like this? Please assume yourself being a senior developer which is expected to contribute in misc development direction and convention.

    Read the article

  • Windows 8&ndash;Custom WinRT components and WinJS

    - by Jonas Bush
    Wow, I’m still alive! I installed the RTM of Windows 8 when it became available, and in the last few days have started taking a look at writing a windows 8 app using HTML/JS, which in and of itself is a weird thing. I don’t think that windows developers of 10 years ago would’ve thought something like this would have ever come about. As I was working on this, I ran across a problem, found the solution, and thought I’d blog about it to try and kick start me back into blogging. I already answered my own question on Stack Overflow, but will explain here. I needed to create a custom WinRT component to do some stuff that I either wouldn’t be able to or didn’t know how to do with the javascript libraries available to me. I had a javascript class defined like this: WinJS.Namespace.define("MyApp", { MyClass: WinJS.Class.define(function() { //constructor function }, { /*instance members*/ }, { /*static members*/ }) }); This gives me an object I can access in javascript: var foo = new MyApp.MyClass(); I created my WinRT component like this: namespace MyApp { public sealed class SomeClass { public int SomeMethod() { return 42; } } }   With the thought that from my javascript, I’d be able to do this: var foo = new MyApp.MyClass(); var bar = new MyApp.SomeClass(); //from WinRT component foo.SomeProperty = bar.SomeMethod();   When I tried this, I got the following error when trying to construct MyApp.MyClass (the object defined in Javascript) 0x800a01bd - Javascript runtime error: Object doesn't support this action. I puzzled for a bit, then noticed while debugging that my “MyApp” namespace didn’t have anything in it other than the WinRT component. I changed my WinRT component to this: namespace MyAppUtils { public sealed class SomeClass { //etc } } And after this, everything was fine. So, lesson learned: If you’re using Javascript and create a custom WinRT component, make sure that the WinRT component is in a namespace all its own. Not sure why this happens, and if I find out why or if MS says something about this somewhere, I’ll come back and update this.

    Read the article

  • Functional programming and stateful algorithms

    - by bigstones
    I'm learning functional programming with Haskell. In the meantime I'm studying Automata theory and as the two seem to fit well together I'm writing a small library to play with automata. Here's the problem that made me ask the question. While studying a way to evaluate a state's reachability I got the idea that a simple recursive algorithm would be quite inefficient, because some paths might share some states and I might end up evaluating them more than once. For example, here, evaluating reachability of g from a, I'd have to exclude f both while checking the path through d and c: So my idea is that an algorithm working in parallel on many paths and updating a shared record of excluded states might be great, but that's too much for me. I've seen that in some simple recursion cases one can pass state as an argument, and that's what I have to do here, because I pass forward the list of states I've gone through to avoid loops. But is there a way to pass that list also backwards, like returning it in a tuple together with the boolean result of my canReach function? (although this feels a bit forced) Besides the validity of my example case, what other techniques are available to solve this kind of problems? I feel like these must be common enough that there have to be solutions like what happens with fold* or map. So far, reading learnyouahaskell.com I didn't find any, but consider I haven't touched monads yet. (if interested, I posted my code on codereview)

    Read the article

  • Design for XML mapping scenarios between two different systems [on hold]

    - by deepak_prn
    Mapping XML fields between two systems is a mundane routine in integration scenarios. I am trying to make the design documents look better and provide clear understanding to the developers especially when we do not use XSLT or any other IDE such as jDeveloper or eclipse plugins. I want it to be a high level design but at the same time talk in developer's language. So that there is no requirements that slip under the crack. For example, one of the scenarios goes: the store cashier sells an item, the transaction data is sent to Data management system. Now, I am writing a functional design for the scenario which deals with mapping XML fields between our system and the data management system. Question : I was wondering if some one had to deal with mapping XML fields between two systems? (without XSLT being involved) and if you used a table to represent the fields mapping (example is below) or any other visualization tool which does not break the bank ? I am trying to find out if there is a better way to represent XML mapping in your design documents. The widely accepted and used method seems to be using a simple table such as in the picture to illustrate the mapping. I am wondering if there are alternate ways/ tools to represent such as in Altova:

    Read the article

  • How can a non-technical person can learn to write a spec for small projects?

    - by Joseph Turian
    How can a non-technical person learn to write specs for small projects? A friend of mine is trying to outsource some development on a statistics project. In particular, he does a lot of work in excel, and wants to outsource the creation of scripts to do what he now does by hand. However, my friend is extremely non-technical. He is poor at writing technical specs. When he does write a spec, it is written the way you would describe doing something in excel (go to this cell and then copy the value to that cell). It is also overly verbose, and does examples several times. I'm not sure if he properly describes corner cases. The first project he outsourced was a failure. I think he overdescribed some details, but underdescribed corner cases. That and/or the coder he hired didn't think through the corner cases and ask appropriate questions. I'm not sure. I got on IM with him and it took me half an hour to dig out a description that should have taken five minutes or less to describe. I wrote the scripts for him at the end, but didn't examine why his process with the coder failed. He has asked me for help. However, I refuse to get involved, because taking his spec and translating it into clear requirements is 10x more work than executing on a clearly written spec. What is the right way for him to learn? Are there resources he could use? Are there ways he can learn from small, low-pressure practice projects with coders? [edit: Most of his scripts are statistical and data processing oriented. e.g. take this column and run an average over it. Remove these rows under these conditions. So the challenge is different than spec'ing a web app.]

    Read the article

  • How to explain pointers to a Java/VB programmer

    - by Skeith
    I am writing a game and my friend has offered to help me as it is a RPG and will take a long time to do the "scripting" bit of the game. The problem is IMO he's not that good a programmer :( (add flame war here). He has only programmed in Java and VB and keeps saying really stupid things to me like "Why don't you drag and drop an onClick event" to design my UI when I'm using DirectX. I tried explaining pointers to him but his response was, if it's just a variable that holds a memory address, why don't you just use an int? I create an instance of an attack class and give the creature a pointer to it so if several creatures use the same attack there is only one instance of it. He keeps saying why not put if statements in the creature class for every attack class and set true for the ones that are there. He has programmed mainly in VB and a little in Java just to learn OOP. How can I explain advanced C++ concepts like pointers and memory management to him? He just doesn't understand there are no super functions like form.show in C++.

    Read the article

  • Strict Pomodoro and other time management Chrome extensions

    - by kerry
    I have recently begun using the Pomodoro Technique to increase my productivity. However, I still find myself getting sucked in to the vortex of useless information that is the internet. With that in mind I began searching for a useful chrome extension to replace the Android Pomodoro app I have been using to manage my ‘doros. I even considered writing it myself. Luckily, I stumbled on one that had a similar featureset to what I was looking for. Strict Pomodoro is an excellent Chrome extension for practicing Pomodoro. Though lacking a few key features, such as the ability to set the duration of your pomodoros and breaks, it still has a key feature that helps me stay on task. It blocks time sucking websites. You can set filter lists and it will keep you from accessing them during a Pomodoro. Effectively reminding you to stay on task. Also, the author readily admits that it was quickly put together and new features may be added down the road. For now, it is still an excellent option. For those of you who do not practice Pomodoro but are trying to stay on task. The StayFocusd extension will effectively manage the amount of time you spend on useless (non-productive) sites. It also has a rich feature set that may be better for your work habits. OK, breaks over. Time to get back to work. 25 minutes at a time.

    Read the article

  • Shuffling algorithm with no "self-mapping"?

    - by OregonTrail
    To randomly shuffle an array, with no bias towards any particular permutation, there is the Knuth Fischer-Yeats algorithm. In Python: #!/usr/bin/env python import sys from random import randrange def KFYShuffle(items): i = len(items) - 1 while i > 0: j = randrange(i+1) # 0 <= j <= i items[j], items[i] = items[i], items[j] i = i - 1 return items print KFYShuffle(range(int(sys.argv[1]))) There is also Sattolo's algorithm, which produces random cycles. In Python: #!/usr/bin/env python import sys from random import randrange def SattoloShuffle(items): i = len(items) while i > 1: i = i - 1 j = randrange(i) # 0 <= j <= i-1 items[j], items[i] = items[i], items[j] return items print SattoloShuffle(range(int(sys.argv[1]))) I'm currently writing a simulation with the following specifications for a shuffling algorithm: The algorithm is unbiased. If a true random number generator was used, no permutation would be more likely than any other. No number ends up at its original index. The input to the shuffle will always be A[i] = i for i from 0 to N-1 Permutations are produced that are not cycles, but still meet specification 2. The cycles produced by Sattolo's algorithm meet specification 2, but not specification 1 or 3. I've been working at creating an algorithm that meets these specifications, what I came up with was equivalent to Sattolo's algorithm. Does anyone have an algorithm for this problem?

    Read the article

  • What I&rsquo;m Reading &ndash; Microsoft Silverlight 4 Business Application Development: Beginner&rs

    - by Dave Campbell
    I don’t have a lot of time for reading lately, so James Patterson and all those guys are *way* ahead of me … but I do try to make time to read technical material. A couple books have come across just recently and I thought I’d mention them one at a time. The book I want to mention tonight is Microsoft Silverlight 4 Business Application Development: Beginner’s Guide : by Cameron Albert and Frank LaVigne. Cameron and Frank are both great guys and you’ve seen their blog posts come across my SilverlightCream posts many times. I like the writing and format of the book. It leads you quite well from one concept to the next and for a technical book, it holds your interest. You can check out a free chapter here. I have the eBook because for technical material, at least lately, I’ve gravitated toward that. I can have it with me on a USB stick at work, or at home. Read the free chapter then check out their blogs. Even if you think you know a lot of this material, I think you’ll find yourself learning something, and besides, it’s a great one-place reference. Good work guys! Technorati Tags: Silverlight 4

    Read the article

  • Collocation in Code

    - by Dan McGrath
    Quite some time ago I remember reading an article from 'Joel on Software' that mentioned collocation of information in code was important. By collocation, I mean that relevant information about the code is present when the code is. I'm currently writing an article that has a small bit in it about collocation so I went searching for sources and found the quote in the article 'Making Wrong Code Look Wrong' In order to make code really, really robust, when you code-review it, you need to have coding conventions that allow collocation. In other words, the more information about what code is doing is located right in front of your eyes, the better a job you’ll do at finding the mistakes. When you have code that says For me, collocation isn't just about the code itself, but the tool used to view the code. If it can help with the 'collocation factor' (term coined by me?) I believe it can help with the programmers productivity. Take for example the modern IDEs that show you the variables type by hovering over it. Are their any other articles written about collocation in code and/or are their other terms that this is known by?

    Read the article

  • What are the advantages of Maven when it comes to single man, educational projects

    - by Leron
    I've spend a few hours playing around with Maven + reading some stuff on the apache official site and also a few random googled articles. By this I mean that I really tried to find the answers myself - both by reading and by doing things on my own. Also maybe worth to mention that I installed the m2e plugin so most of the time I've tried things out from Eclipse and not using the command line too much. However aside from the generated project that for example prevent me from using the default package I didn't see that much of a difference with the standard way I've created my projects before try Maven. In fact I've almost decided to skip Maven for now and move on to the other technology I wanted to learn more in-depth - Hibernate, but when I start with opening the official page the first thing I've read was the recommendation to use Hibernate with Maven. That get me confused and made me taking a step back and trying once more to find what I'm obviously missing right now. As it's said in the maven.apache.. site, the true strength of Maven is shown when you work on large projects with other people, but I lack the option to see how Maven is really used in this scenario, still i think that there are maybe advantages even when it comes to working with small projects alone, but I really have difficulties to point them out. So what do you think are the advantages of Maven when it's used for small projects writing from a single person. What are the things that I should be aware of and try to exploit (I mean features offered by Maven) that can come in handy in this situations?

    Read the article

  • Different methods of ammo resupply

    - by Chris Mantle
    I'm writing a small game at the moment. Presently, I have one or two design elements that aren't locked down yet, and I wanted to ask for input on one of these. For dramatic effect, the player's character in my game is immobilised, alone and has a supposedly limited amount of ammo for their weapons. However, I would like to periodically resupply the player with ammo (for the purpose of balancing the level of difficulty and to allow the player to continue if they're doing well). I'm trying to think of a method of resupply that's different to the more familiar strategies of making ammo magically appear or having the antagonists drop some when they die. I'd like to emphasise the notion of the player's isolation as much as possible, and finding a way of 'sneaking' ammo to the player without removing too much of that emphasis is basically what I'm trying to think of (it's definitely a valid argument that resupplying the player removes it anyway) I have considered a sort of simple in-game 'store', where kills get you points that you can spend on ammo for your favourite weapon. This might work well, and may also be good for supporting a simple micro-transaction business model within the game. However, you'd have to pause the game often to make purchases, which would interrupt the action, and it works against the notion of isolation. Any thoughts?

    Read the article

  • Working with data and meta data that are separated on different servers

    - by afuzzyllama
    While developing a product, I've come across a situation where my group wants to store meta data for data entry forms (questions, layout, etc) in a different database then the database where the collected data is stored. This is mostly for security because we want to be able to have our meta data public facing, while keeping collected data as secure as possible. I was thinking about writing a web service that provides the meta information that the data collection program could access. The only issue I see with this approach is the front end is going to have to match the meta data with the collected data, which would be more efficient as a join on the back end. Currently, this system is slated to run on .NET and MSSQL. I haven't played around with .NET libraries running in SQL, but I'm considering trying to create logic that would pull from the web service, convert the meta data into a table that SQL can join on, and return the combined data and meta data that way. Is this solution the wrong way to approach the problem? Is there a pattern or "industry standard" way of bringing together two datasets that don't live in the same database?

    Read the article

  • How to use shared_ptr for COM interface pointers

    - by Seefer
    I've been reading about various usage advice relating to the new c++ standard smart pointers unique_ptr, shared_ptr and weak_ptr and generally 'grok' what they are about when I'm writing my own code that declares and consumes them. However, all the discussions I've read seem restricted to this simple usage situation where the programmer is using smart in his/her own code, with no real discussion on techniques when having to work with libraries that expect raw pointers or other types of 'smart pointers' such as COM interface pointers. Specifically I'm learning my way through C++ by attempting to get a standard Win32 real-time game loop up and running that uses Direct2D & DirectWrite to render text to the display showing frames per second. My first task with Direct2D is in creating a Direct2D Factory object with the following code from the Direct2D examples on MSDN: ID2D1Factory* pD2DFactory = nullptr; HRESULT hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &pD2DFactory); pD2DFactory is obviously an 'out' parameter and it's here where I become uncertain how to make use of smart pointers in this context, if indeed it's possible. My inexperienced C++ mind tells me I have two problems: With pD2DFactory being a COM interface pointer type, how would smart_ptr work with the Add() / Release() member functions for a COM object instance? Are smart pointers able to be passed to functions in situations where the function is using an 'out' pointer parameter technique? I did experiment with the alternative of using _com_ptr_t in the comip.h header file to help with pointer lifetime management and declared the pD2DFactory pointer with the following code: _com_ptr_t<_com_IIID<pD2DFactory, &__uuidof(pD2DFactory)>> pD2DFactory = nullptr; and it appears to work so far but, as you can see, the syntax is cumbersome :) So, I was wondering if any C++ gurus here could confirm whether smart pointers are able to help in cases like this and provide examples of usage, or point me to more in-depth discussions of smart pointer usage when needing to work with other code libraries that know nothing of them. Or is it simply a case of my trying to use the wrong tool for the job? :)

    Read the article

  • C# Role Provider for multiple applications

    - by Juventus18
    I'm making a custom RoleProvider that I would like to use across multiple applications in the same application pool. For the administration of roles (create new role, add users to role, etc..) I would like to create a master application that I could login to and set the roles for each additional application. So for example, I might have AppA and AppB in my organization, and I need to make an application called AppRoleManager that can set roles for AppA and AppB. I am having troubles implementing my custom RoleProvider because it uses an initialize method that gets the application name from the config file, but I need the application name to be a variable (i.e. "AppA" or "AppB") and passed as a parameter. I thought about just implementing the required methods, and then also having additional methods that pass application name as a parameter, but that seems clunky. i.e. public override CreateRole(string roleName) { //uses the ApplicationName property of this, which is set in web.config //creates role in db } public CreateRole(string ApplicationName, string roleName) { //creates role in db with specified params. } Also, I would prefer if people were prevented from calling CreateRole(string roleName) because the current instance of the class might have a different applicationName value than intended (what should i do here? throw NotImplementedException?). I tried just writing the class without inheriting RoleProvider. But it is required by the framework. Any general ideas on how to structure this project? I was thinking make a wrapper class that uses the role provider, and explicitly sets the application name before (and after) and calls to the provider something like this: static class RoleProviderWrapper { public static CreateRole(string pApplicationName, string pRoleName) { Roles.Provider.ApplicationName = pApplicationName; Roles.Provider.CreateRole(pRoleName); Roles.Provider.ApplicationName = "Generic"; } } is this my best-bet?

    Read the article

  • Is using something other than XML advisable for my configuration file?

    - by Earlz
    I have a small tool I'm designing which would require a configuration file of some sort. The configuration file in my case is really more of a database, but it needs to be lightweight, and if needed the end-user should find it easily editable. However, it also will contain a lot of things in it. (depending on certain factors, could be 1Mb or more) I've decided I'd rather use plain ol' text, rather than trying to use SQLite or some such. However, with using text, I also have to deal with the variety of formats. So far, my options are XML JSON Custom format The data in my file is quite simple consisting for the most part of key-value type things. So, a custom format wouldn't be that difficult... but I'd rather not have to worry about writing the support for it. I've never seen JSON used for configuration files. And XML would bloat the file size substantially I think. (I also just has a dislike of XML in general). What should I do in this case? Factors to consider: This configuration file can be uploaded to a web service(so size matters) Users must be able to edit it by hand if necessary(ease of editing and reading matters) Must be able to generate and process automatically (speed doesn't matter a lot, but not excessively slow) The "keys" and "values" are plain strings, but must be escaped because they can contain anything. (unicode and escaping has to work easily)

    Read the article

  • MEncoder Install on Ubuntu

    - by Tauqeer Ahmad
    I am writing this after checking almost all the posts but none of those solved my problem. I am trying to install mencoder to process some videos but there are strange errors coming. For examples when I try sudo apt-get install mencoder the following errors comes out: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mencoder : Depends: mplayer Depends: libasound2 (> 1.0.24.1) Depends: libavcodec53 (>= 4:0.8~beta2-2) but it is not installable or libavcodec-extra-53 (>= 4:0.8~beta2-2) but it is not going to be installed Depends: libavformat53 (>= 4:0.8~beta2-2) but it is not installable or libavformat-extra-53 (>= 4:0.8~beta2-2) but it is not going to be installed Depends: libcdparanoia0 (>= 3.10.2+debian) but it is not installable Depends: libenca0 (>= 1.9) but it is not installable Depends: libfontconfig1 (>= 2.8.0) but it is not installable Depends: libgif4 (>= 4.1.4) but it is not installable Depends: libjpeg8 (>= 8c) but it is not installable Depends: liblzo2-2 but it is not installable Depends: libsmbclient (>= 3.0.24) but it is not installable Depends: libspeex1 (>= 1.2~beta3-1) but it is not installable Depends: libtheora0 (>= 1.0) but it is not installable E: Unable to correct problems, you have held broken packages. Can anyone help to solve this issue. I tried to find static builds of MEncoder but could not.

    Read the article

  • How to write a very basic compiler [closed]

    - by Ali
    Possible Duplicate: Best Online resources to learn about Compilers? What would be the best way to learn about compilers, and executable formats? Advanced compilers like gcc compile codes into machine readable files according to the language in which the code has been written (e.g. C, C++, etc). In fact, they interpret the meaning of each codes according to library and functions of the corresponding languages. Correct me if I'm wrong. I wish to better understand compilers by writing a very basic compiler (probably in C) to compile a static file (e.g. Hello World in a text file). I tried some tutorials and books, but all of them are for practical cases. They deal with compiling dynamic codes with meanings connected with the corresponding language. How can I write a basic compiler to convert a static text into a machine readable file? The next step will be introducing variables into the compiler; imagine that we want to write a compiler which compile only some functions of a language. Introducing practical tutorials and resources is highly appreciated :-)

    Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >