Search Results

Search found 13958 results on 559 pages for 'ex mode'.

Page 214/559 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• Effective optimization strategies on modern C++ compilers

  - by user168715

  I'm working on scientific code that is very performance-critical. An initial version of the code has been written and tested, and now, with profiler in hand, it's time to start shaving cycles from the hot spots. It's well-known that some optimizations, e.g. loop unrolling, are handled these days much more effectively by the compiler than by a programmer meddling by hand. Which techniques are still worthwhile? Obviously, I'll run everything I try through a profiler, but if there's conventional wisdom as to what tends to work and what doesn't, it would save me significant time. I know that optimization is very compiler- and architecture- dependent. I'm using Intel's C++ compiler targeting the Core 2 Duo, but I'm also interested in what works well for gcc, or for "any modern compiler." Here are some concrete ideas I'm considering: Is there any benefit to replacing STL containers/algorithms with hand-rolled ones? In particular, my program includes a very large priority queue (currently a std::priority_queue) whose manipulation is taking a lot of total time. Is this something worth looking into, or is the STL implementation already likely the fastest possible? Along similar lines, for std::vectors whose needed sizes are unknown but have a reasonably small upper bound, is it profitable to replace them with statically-allocated arrays? I've found that dynamic memory allocation is often a severe bottleneck, and that eliminating it can lead to significant speedups. As a consequence I'm interesting in the performance tradeoffs of returning large temporary data structures by value vs. returning by pointer vs. passing the result in by reference. Is there a way to reliably determine whether or not the compiler will use RVO for a given method (assuming the caller doesn't need to modify the result, of course)? How cache-aware do compilers tend to be? For example, is it worth looking into reordering nested loops? Given the scientific nature of the program, floating-point numbers are used everywhere. A significant bottleneck in my code used to be conversions from floating point to integers: the compiler would emit code to save the current rounding mode, change it, perform the conversion, then restore the old rounding mode --- even though nothing in the program ever changed the rounding mode! Disabling this behavior significantly sped up my code. Are there any similar floating-point-related gotchas I should be aware of? One consequence of C++ being compiled and linked separately is that the compiler is unable to do what would seem to be very simple optimizations, such as move method calls like strlen() out of the termination conditions of loop. Are there any optimization like this one that I should look out for because they can't be done by the compiler and must be done by hand? On the flip side, are there any techniques I should avoid because they are likely to interfere with the compiler's ability to automatically optimize code? Lastly, to nip certain kinds of answers in the bud: I understand that optimization has a cost in terms of complexity, reliability, and maintainability. For this particular application, increased performance is worth these costs. I understand that the best optimizations are often to improve the high-level algorithms, and this has already been done.

  Read the article

• The dynamic Type in C# Simplifies COM Member Access from Visual FoxPro

  - by Rick Strahl

  I’ve written quite a bit about Visual FoxPro interoperating with .NET in the past both for ASP.NET interacting with Visual FoxPro COM objects as well as Visual FoxPro calling into .NET code via COM Interop. COM Interop with Visual FoxPro has a number of problems but one of them at least got a lot easier with the introduction of dynamic type support in .NET. One of the biggest problems with COM interop has been that it’s been really difficult to pass dynamic objects from FoxPro to .NET and get them properly typed. The only way that any strong typing can occur in .NET for FoxPro components is via COM type library exports of Visual FoxPro components. Due to limitations in Visual FoxPro’s type library support as well as the dynamic nature of the Visual FoxPro language where few things are or can be described in the form of a COM type library, a lot of useful interaction between FoxPro and .NET required the use of messy Reflection code in .NET. Reflection is .NET’s base interface to runtime type discovery and dynamic execution of code without requiring strong typing. In FoxPro terms it’s similar to EVALUATE() functionality albeit with a much more complex API and corresponiding syntax. The Reflection APIs are fairly powerful, but they are rather awkward to use and require a lot of code. Even with the creation of wrapper utility classes for common EVAL() style Reflection functionality dynamically access COM objects passed to .NET often is pretty tedious and ugly. Let’s look at a simple example. In the following code I use some FoxPro code to dynamically create an object in code and then pass this object to .NET. An alternative to this might also be to create a new object on the fly by using SCATTER NAME on a database record. How the object is created is inconsequential, other than the fact that it’s not defined as a COM object – it’s a pure FoxPro object that is passed to .NET. Here’s the code: *** Create .NET COM InstanceloNet = CREATEOBJECT('DotNetCom.DotNetComPublisher') *** Create a Customer Object Instance (factory method) loCustomer = GetCustomer() loCustomer.Name = "Rick Strahl" loCustomer.Company = "West Wind Technologies" loCustomer.creditLimit = 9999999999.99 loCustomer.Address.StreetAddress = "32 Kaiea Place" loCustomer.Address.Phone = "808 579-8342" loCustomer.Address.Email = "[email protected]" *** Pass Fox Object and echo back values ? loNet.PassRecordObject(loObject) RETURN FUNCTION GetCustomer LOCAL loCustomer, loAddress loCustomer = CREATEOBJECT("EMPTY") ADDPROPERTY(loCustomer,"Name","") ADDPROPERTY(loCustomer,"Company","") ADDPROPERTY(loCUstomer,"CreditLimit",0.00) ADDPROPERTY(loCustomer,"Entered",DATETIME()) loAddress = CREATEOBJECT("Empty") ADDPROPERTY(loAddress,"StreetAddress","") ADDPROPERTY(loAddress,"Phone","") ADDPROPERTY(loAddress,"Email","") ADDPROPERTY(loCustomer,"Address",loAddress) RETURN loCustomer ENDFUNC Now prior to .NET 4.0 you’d have to access this object passed to .NET via Reflection and the method code to do this would looks something like this in the .NET component: public string PassRecordObject(object FoxObject) { // *** using raw Reflection string Company = (string) FoxObject.GetType().InvokeMember( "Company", BindingFlags.GetProperty,null, FoxObject,null); // using the easier ComUtils wrappers string Name = (string) ComUtils.GetProperty(FoxObject,"Name"); // Getting Address object – then getting child properties object Address = ComUtils.GetProperty(FoxObject,"Address");    string Street = (string) ComUtils.GetProperty(FoxObject,"StreetAddress"); // using ComUtils 'Ex' functions you can use . Syntax     string StreetAddress = (string) ComUtils.GetPropertyEx(FoxObject,"AddressStreetAddress"); return Name + Environment.NewLine + Company + Environment.NewLine + StreetAddress + Environment.NewLine + " FOX"; } Note that the FoxObject is passed in as type object which has no specific type. Since the object doesn’t exist in .NET as a type signature the object is passed without any specific type information as plain non-descript object. To retrieve a property the Reflection APIs like Type.InvokeMember or Type.GetProperty().GetValue() etc. need to be used. I made this code a little simpler by using the Reflection Wrappers I mentioned earlier but even with those ComUtils calls the code is pretty ugly requiring passing the objects for each call and casting each element. Using .NET 4.0 Dynamic Typing makes this Code a lot cleaner Enter .NET 4.0 and the dynamic type. Replacing the input parameter to the .NET method from type object to dynamic makes the code to access the FoxPro component inside of .NET much more natural: public string PassRecordObjectDynamic(dynamic FoxObject) { // *** using raw Reflection string Company = FoxObject.Company; // *** using the easier ComUtils class string Name = FoxObject.Name; // *** using ComUtils 'ex' functions to use . Syntax string Address = FoxObject.Address.StreetAddress; return Name + Environment.NewLine + Company + Environment.NewLine + Address + Environment.NewLine + " FOX"; } As you can see the parameter is of type dynamic which as the name implies performs Reflection lookups and evaluation on the fly so all the Reflection code in the last example goes away. The code can use regular object ‘.’ syntax to reference each of the members of the object. You can access properties and call methods this way using natural object language. Also note that all the type casts that were required in the Reflection code go away – dynamic types like var can infer the type to cast to based on the target assignment. As long as the type can be inferred by the compiler at compile time (ie. the left side of the expression is strongly typed) no explicit casts are required. Note that although you get to use plain object syntax in the code above you don’t get Intellisense in Visual Studio because the type is dynamic and thus has no hard type definition in .NET . The above example calls a .NET Component from VFP, but it also works the other way around. Another frequent scenario is an .NET code calling into a FoxPro COM object that returns a dynamic result. Assume you have a FoxPro COM object returns a FoxPro Cursor Record as an object: DEFINE CLASS FoxData AS SESSION OlePublic cAppStartPath = "" FUNCTION INIT THIS.cAppStartPath = ADDBS( JustPath(Application.ServerName) ) SET PATH TO ( THIS.cAppStartpath ) ENDFUNC FUNCTION GetRecord(lnPk) LOCAL loCustomer SELECT * FROM tt_Cust WHERE pk = lnPk ; INTO CURSOR TCustomer IF _TALLY < 1 RETURN NULL ENDIF SCATTER NAME loCustomer MEMO RETURN loCustomer ENDFUNC ENDDEFINE If you call this from a .NET application you can now retrieve this data via COM Interop and cast the result as dynamic to simplify the data access of the dynamic FoxPro type that was created on the fly: int pk = 0; int.TryParse(Request.QueryString["id"],out pk); // Create Fox COM Object with Com Callable Wrapper FoxData foxData = new FoxData(); dynamic foxRecord = foxData.GetRecord(pk); string company = foxRecord.Company; DateTime entered = foxRecord.Entered; This code looks simple and natural as it should be – heck you could write code like this in days long gone by in scripting languages like ASP classic for example. Compared to the Reflection code that previously was necessary to run similar code this is much easier to write, understand and maintain. For COM interop and Visual FoxPro operation dynamic type support in .NET 4.0 is a huge improvement and certainly makes it much easier to deal with FoxPro code that calls into .NET. Regardless of whether you’re using COM for calling Visual FoxPro objects from .NET (ASP.NET calling a COM component and getting a dynamic result returned) or whether FoxPro code is calling into a .NET COM component from a FoxPro desktop application. At one point or another FoxPro likely ends up passing complex dynamic data to .NET and for this the dynamic typing makes coding much cleaner and more readable without having to create custom Reflection wrappers. As a bonus the dynamic runtime that underlies the dynamic type is fairly efficient in terms of making Reflection calls especially if members are repeatedly accessed. © Rick Strahl, West Wind Technologies, 2005-2010Posted in COM  FoxPro  .NET  CSharp  

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system.The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me.At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach.Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements.My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work.Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way.DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal.Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info:You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client.You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features.I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically.When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions:On the Choose the installation you want page of the installation wizard, I chose Server Farm.On the Server Type page, I chose Complete.At the end of the installation, I did not run the configuration wizard.Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end.It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective.I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed:Install SQL Server 2008 R2 to get a database engine instance installed.Run the SharePoint configuration wizard to set up the SharePoint databases.In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization.Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment.I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon.Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment.I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• WatiN screenshot saver

  - by Brian Schroer

  In addition to my automated unit, system and integration tests for ASP.NET projects, I like to give my customers something pretty that they can look at and visually see that the web site is behaving properly. I use the Gallio test runner to produce a pretty HTML report, and WatiN (Web Application Testing In .NET) to test the UI and create screenshots. I have a couple of issues with WatiN’s “CaptureWebPageToFile” method, though: It blew up the first (and only) time I tried it, possibly because… It scrolls down to capture the entire web page (I tried it on a very long page), and I usually don’t need that Also, sometimes I don’t need a picture of the whole browser window - I just want a picture of the element that I'm testing (for example, proving that a button has the correct caption). I wrote a WatiN screenshot saver helper class with these methods: SaveBrowserWindowScreenshot(Watin.Core.IE ie)  / SaveBrowserWindowScreenshot(Watin.Core.Element element) saves a screenshot of the browser window SaveBrowserWindowScreenshotWithHighlight(Watin.Core.Element element) saves a screenshot of the browser window, with the specified element scrolled into view and highlighted SaveElementScreenshot(Watin.Core.Element element) saves a picture of only the specified element The element highlighting improves on the built-in WatiN method (which just gives the element a yellow background, and makes the element pretty much unreadable when you have a light foreground color) by adding the ability to specify a HighlightCssClassName that points to a style in your site’s stylesheet. This code is specifically for testing with Internet Explorer (‘cause that’s what I have to test with at work), but you’re welcome to take it and do with it what you want… using System; using System.Drawing; using System.Drawing.Imaging; using System.IO; using System.Reflection; using System.Runtime.InteropServices; using System.Text; using System.Threading; using SHDocVw; using WatiN.Core; using mshtml; namespace BrianSchroer.TestHelpers { public static class WatinScreenshotSaver { public static void SaveBrowserWindowScreenshotWithHighlight (Element element, string screenshotName) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element, screenshotName); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshotWithHighlight(Element element) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshot(Element element, string screenshotName) { SaveScreenshot(GetIe(element), screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(Element element) { SaveScreenshot(GetIe(element), null, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie, string screenshotName) { SaveScreenshot(ie, screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie) { SaveScreenshot(ie, null, SaveBitmapForCallbackArgs); } public static void SaveElementScreenshot(Element element, string screenshotName) { // TODO: Figure out how to get browser window "chrome" size and not have to go to full screen: var iex = (InternetExplorerClass) GetIe(element).InternetExplorer; bool fullScreen = iex.FullScreen; if (!fullScreen) iex.FullScreen = true; ScrollIntoView(element); SaveScreenshot(GetIe(element), screenshotName, args => SaveElementBitmapForCallbackArgs(element, args)); iex.FullScreen = fullScreen; } public static void SaveElementScreenshot(Element element) { SaveElementScreenshot(element, null); } private static void SaveScreenshot(IE browser, string screenshotName, Action<ScreenshotCallbackArgs> screenshotCallback) { string fileName = string.Format("{0:000}{1}{2}.jpg", ++_screenshotCount, (string.IsNullOrEmpty(screenshotName)) ? "" : " ", screenshotName); string path = Path.Combine(ScreenshotDirectoryName, fileName); Console.WriteLine(); // Gallio HTML-encodes the following display, but I have a utility program to // remove the "HTML===" and "===HTML" and un-encode the rest to show images in the Gallio report: Console.WriteLine("HTML===<div><b>{0}:</br></b><img src=\"{1}\" /></div>===HTML", screenshotName, new Uri(path).AbsoluteUri); MakeBrowserWindowTopmost(browser); try { var args = new ScreenshotCallbackArgs { InternetExplorerClass = (InternetExplorerClass)browser.InternetExplorer, ScreenshotPath = path }; Thread.Sleep(100); screenshotCallback(args); } catch (Exception ex) { Console.WriteLine(ex.Message); } } public static void HighlightElement(Element element, bool doHighlight) { if (!element.Exists) return; if (string.IsNullOrEmpty(HighlightCssClassName)) { element.Highlight(doHighlight); return; } string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); string format = (doHighlight) ? "{0}.className += ' {1}'" : "{0}.className = {0}.className.replace(' {1}', '')"; sb.AppendFormat(" " + format + ";", jsRef, HighlightCssClassName); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void ScrollIntoView(Element element) { string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void MakeBrowserWindowTopmost(IE ie) { ie.BringToFront(); SetWindowPos(ie.hWnd, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS); } public static string HighlightCssClassName { get; set; } private static int _screenshotCount; private static string _screenshotDirectoryName; public static string ScreenshotDirectoryName { get { if (_screenshotDirectoryName == null) { var asm = Assembly.GetAssembly(typeof(WatinScreenshotSaver)); var uri = new Uri(asm.CodeBase); var fileInfo = new FileInfo(uri.LocalPath); string directoryName = fileInfo.DirectoryName; _screenshotDirectoryName = Path.Combine( directoryName, string.Format("Screenshots_{0:yyyyMMddHHmm}", DateTime.Now)); Console.WriteLine("Screenshot folder: {0}", _screenshotDirectoryName); Directory.CreateDirectory(_screenshotDirectoryName); } return _screenshotDirectoryName; } set { _screenshotDirectoryName = value; _screenshotCount = 0; } } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags); private static readonly IntPtr HWND_TOPMOST = new IntPtr(-1); private const UInt32 SWP_NOSIZE = 0x0001; private const UInt32 SWP_NOMOVE = 0x0002; private const UInt32 TOPMOST_FLAGS = SWP_NOMOVE | SWP_NOSIZE; private static IE GetIe(Element element) { if (element == null) return null; var container = element.DomContainer; while (container as IE == null) container = container.DomContainer; return (IE)container; } private static void SaveBitmapForCallbackArgs(ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; SaveBitmap(args.ScreenshotPath, iex.Left, iex.Top, iex.Width, iex.Height); } private static void SaveElementBitmapForCallbackArgs(Element element, ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; Rectangle bounds = GetElementBounds(element); SaveBitmap(args.ScreenshotPath, iex.Left + bounds.Left, iex.Top + bounds.Top, bounds.Width, bounds.Height); } /// <summary> /// This method is used instead of element.NativeElement.GetElementBounds because that /// method has a bug (http://sourceforge.net/tracker/?func=detail&aid=2994660&group_id=167632&atid=843727). /// </summary> private static Rectangle GetElementBounds(Element element) { var ieElem = element.NativeElement as WatiN.Core.Native.InternetExplorer.IEElement; IHTMLElement elem = ieElem.AsHtmlElement; int left = elem.offsetLeft; int top = elem.offsetTop; for (IHTMLElement parent = elem.offsetParent; parent != null; parent = parent.offsetParent) { left += parent.offsetLeft; top += parent.offsetTop; } return new Rectangle(left, top, elem.offsetWidth, elem.offsetHeight); } private static void SaveBitmap(string path, int left, int top, int width, int height) { using (var bitmap = new Bitmap(width, height)) { using (Graphics g = Graphics.FromImage(bitmap)) { g.CopyFromScreen( new Point(left, top), Point.Empty, new Size(width, height) ); } bitmap.Save(path, ImageFormat.Jpeg); } } private class ScreenshotCallbackArgs { public InternetExplorerClass InternetExplorerClass { get; set; } public string ScreenshotPath { get; set; } } } }

  Read the article

• Top Tweets SOA Partner Community – March 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community ?SOA Community Newsletter February 2012 wp.me/p10C8u-o0 Marc ?Reading through the #OFM 11.1.1.6 , patchset 5 documentation. What is the best way to upgrade your whole dev…prd street. SOA Community Thanks for the successful and super interesting #sbidays ! Wonderful discussions around the Integration, case management and security tracks Torsten Winterberg Schon den neuen Opitz Technology-Blog gebookmarked? The Cattle Crew bit.ly/yLPwBD wird ab sofort regelmäßig Erkenntnisse posten. OTNArchBeat ? Unit Testing Asynchronous BPEL Processes Using soapUI | @DanielAmadei bit.ly/x9NsS9 Rolando Carrasco ?Video de Human Task en BPM 11g. Por @edwardo040. bit.ly/wki9CA cc @OracleBPM @OracleSOA @soacommunity View video Marcel Mertin SOA Security Hands-On by Dirk Krafzig and Mamoon Yunus at #sbidays is also great! SOA Community Workshop day #sbidays #BPMN2.0 by Volker Stiehl from #SAP great training – now I can model & execute in #bpmsuite #soacommunity Simone Geib ?Just updated our advanced #soasuite #otn page with a number of very interesting @orclateamsoa blog posts: bit.ly/advancedsoasui… OTNArchBeat ? Start Small, Grow Fast: SOA Best Practices article by @biemond, @rluttikhuizen, @demed bit.ly/yem9Zv Steffen Miller ? Nice new features in SOA Suite Business Rules #PS5 Testing rules with scenarios and output validation bit.ly/zj64Q3 @SOACOMMUNITY OTNArchBeat ? Reply SOA Blackbelt training by David Shaffer, April 30th–May 4th 2012 bit.ly/xGdC24 OTNArchBeat ? What have BPM, big data, social tools, and business models got in common? | Andy Mulholland bit.ly/xUkOGf SOA Community ? Live hacking at #sbidays – cheaper shopping, bias cracking, payment systems, secure your SOA! pic.twitter.com/y7YaIdug SOA Community Future #BPM & #ACM solutions can make use of ontology’s, based on #sqarql #sbidays pic.twitter.com/xLb1Z5zs Simone Geib ? @soacommunity: SOA Blackbelt training by David Shaffer, April 30th–May 4th 2012 wp.me/p10C8u-nX Biemond Changing your ADF Connections in Enterprise Manager with PS5: With Patch Set 5 of Fusion Middleware you can fina… bit.ly/zF7Rb1 Marc ? HUGE (!) CPU and Heap improvement on Oracle Fusion Middleware tinyurl.com/762drzp @wlscommunity @soacommunity #OSB #SOA #WLS SOA Community ?Networking @ SOA & BPM Partner Community blogs.oracle.com/soacommunity/e… #soacommunity #otn #opn #oracle SOA Community ?Published the SOA Partner Community newsletter February edition – READ it. Not yet a member? oracle.com/goto/emea/soa #soacommunity #otn #opn AMIS, Oracle & Java Blog by Lucas Jellema: "Book Review: Do More with SOA Integration: Best of Packt (december 2011, various authors)" bit.ly/wq633E Jon petter hjulstad @SOASimone Excellent summary! Lots of new features! Simone Geib ?Do you want to know what’s new in #soasuite #PS5? Go to bit.ly/xBX06f and let me know what you think SOA Community ? Unit Testing Asynchronous BPEL Processes Using soapUI oracle.com/technetwork/ar… #soacommunity #soa #otn #oracle #bpel Retweeted by SOA Community View media Retweeted by SOA Community Eric Elzinga ? Oracle Fusion Middleware Partner Community Forum Malage, The Overview, bit.ly/AA9BKd #ofmforum SOA&Cloud Symposium ? The February issue of the Service Technology Magazine is now published. servicetechmag.com SOA Community ? Oracle SOA Suite 11g Database Growth Management – must read! oracle.com/technetwork/da… #soacommunity #soa #purging demed ? Have you exposed internal processes to mobile devices using #oraclesoa? Interested in an article? DM me! #osb #rest #multichannel #mobile orclateamsoa ? A-Team SOA Blog: Enhanced version of Thread Dump Analyzer (TDA A-Team) ow.ly/1hpk7l SOA Community Reply BPM Suite #PS5 (11.1.1.6) available for download soacommunity.wordpress.com/2012/02/22/soa… Send us your feedback! #soacommunity #bpmsuite #opn SOA Community ? SOA Suite #PS5 (11.1.1.6) available for download soacommunity.wordpress.com/2012/02/22/soa… Send us your feedback! #soacommunity #soasuite SOA Community BPM Suite #PS5 1(1.1.1.6) available for download. List of new BPM features blogs.oracle.com/soacommunity/e… #soacommunity #bpm #bpmsuite #opn OracleBlogs BPM in Utilties Industry ow.ly/1hC3fp Retweeted by SOA Community OTNArchBeat ? Demystifying Oracle Enterprise Gateway | Naresh Persaud bit.ly/xtDNe2 OTNArchBeat ? Architect’s Guide to Big Data; Test BPEL Processes Using SoapUI; Development Debate bit.ly/xbDYSo Frank Nimphius ? Finished my book review of "Do More with SOA Integration: Best of Packt ". Here are my review comments: bit.ly/x2k9OZ Lucas Jellema ? That is my one stop-and-go download center for #PS5 : edelivery.oracle.com/EPD/Download/g… Lucas Jellema ? Interesting piece of documentation: Fusion Applications Extensibility Guide – docs.oracle.com/cd/E15586_01/f… source for design time @ run time inspira Lucas Jellema ? Strongly improved support for testing Business Rules at Design Time in #PS5 see docs.oracle.com/cd/E23943_01/u… Lucas Jellema ? SOA Suite 11gR1 PS5: new BPEL Component testing – docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? PS5 available for CEP (Complex Event Processing) – a personal favorite of mine : oracle.com/technetwork/mi… Lucas Jellema ?What’s New in Fusion Developer’s Guide 11gR1 PS5: docs.oracle.com/cd/E23943_01/w… Lucas Jellema ? BPMN Correlation (FMW 11gR1 PS5): docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? Modifying running BPM Process instances (FMW 11gR1 PS5): docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? SOA Suite 11gR1 PS5 – new aggregation pattern: docs.oracle.com/cd/E23943_01/d… routing multiple messages to same instance Melvin van der Kuijl ? Automating Testing of SOA Composite Applications in PS5. docs.oracle.com/cd/E23943_01/d… Cato Aune ? SOA suite PS5 Enterprise Deployment Guide is available in ePub docs.oracle.com/cd/E23943_01/c… . Much better than pdf on Galaxy Note SOA Community ?JDeveloper 11.1.1.6 is available for download bit.ly/wGYrwE #soacommunity SOA Community ? Your first experience #PS5 – let us know @soacommunity – send us your tweets and blog posts! #soacommunity Jon petter hjulstad ? WLS 10.3.6 New features, ex better logging of jdbc use: docs.oracle.com/cd/E23943_01/w… Heidi Buelow ? Get it now! RT @soacommunity: BPM Suite PS5 11.1.1.6 available for download bit.ly/AgagT5 #bpm #soacommunity Jon petter hjulstad ?SOA Suite PS5 EDG contains OSB! docs.oracle.com/cd/E23943_01/c… Jon petter hjulstad ? Testing Oracle Rules from JDeveloper is easier in PS5: docs.oracle.com/cd/E23943_01/u… Biemond® ? What’s New in Oracle Service Bus 11.1.1.6.0 oracle.com/technetwork/mi… Jon petter hjulstad ? Adminguide New and Changed Features for PS5, ex GridLink data sources: docs.oracle.com/cd/E23943_01/c… Retweeted by SOA Community Andreas Koop ? Unbelievable! #OFM Doc Lib growth from 11gPS4->11gPS5 by 1.2G! View media SOA Community ?ODI PS5 is available oracle.com/technetwork/mi… #odi #soacommunity 22 Feb View media SOA Community Service Bus 11g Development Cookbook soacommunity.wordpress.com/2012/02/20/ser… #osb #soacommunity #ace #opn View media For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

  Read the article

• Gone With the Wind?

  - by antony.reynolds

  Where Have All the Composites Gone? I was just asked to help out with an interesting problem at a customer.  All their composites had disappeared from the EM console, none of them showed as loading in the log files and there was an ominous error message in the logs. Symptoms After a server restart the customer noticed that none of his composites were available, they didn’t show in the EM console and in the log files they saw this error message: SEVERE: WLSFabricKernelInitializer.getCompositeList Error during parsing and processing of deployed-composites.xml file This indicates some sort of problem when parsing the deployed-composites.xml file.  This is very bad because the deployed-composites.xml file is basically the table of contents that tells SOA Infrastructure what composites to load and where to find them in MDS.  If you can’t read this file you can’t load any composites and your SOA Server now has all the utility of a chocolate teapot. Verification We can look at the deployed-composites.xml file from MDS either by connecting JDeveloper to MDS, exporting the file using WLST or exporting the whole soa-infra MDS partition by using EM->SOA->soa-infra->Administration->MDS Configuration.  Exporting via EM is probably the easiest because it then prepares you to fix the problem later.  After exporting the partition to local storage on the SOA Server I then ran an XSLT transform across the file deployed-composites/deployed-composites.xml. <?xml version="1.0" encoding="utf-8"?> <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.w3.org/1999/xhtml">     <xsl:output indent="yes"/>     <xsl:template match="/">         <testResult>             <composite-series>                 <xsl:attribute name="elementCount"><xsl:value-of select="count(deployed-composites/composite-series)"/></xsl:attribute>                 <xsl:attribute name="nameAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series[@name])"/></xsl:attribute>                 <xsl:attribute name="defaultAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series[@default])"/></xsl:attribute>                 <composite-revision>                     <xsl:attribute name="elementCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision)"/></xsl:attribute>                     <xsl:attribute name="dnAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision[@dn])"/></xsl:attribute>                     <xsl:attribute name="stateAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision[@state])"/></xsl:attribute>                     <xsl:attribute name="modeAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision[@mode])"/></xsl:attribute>                     <xsl:attribute name="locationAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision[@location])"/></xsl:attribute>                     <composite>                         <xsl:attribute name="elementCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision/composite)"/></xsl:attribute>                         <xsl:attribute name="dnAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision/composite[@dn])"/></xsl:attribute>                         <xsl:attribute name="deployedTimeAttributeCount"><xsl:value-of select="count(deployed-composites/composite-series/composite-revision/composite[@deployedTime])"/></xsl:attribute>                     </composite>                 </composite-revision>                 <xsl:apply-templates select="deployed-composites/composite-series"/>             </composite-series>         </testResult>     </xsl:template>     <xsl:template match="composite-series">             <xsl:if test="not(@name) or not(@default) or composite-revision[not(@dn) or not(@state) or not(@mode) or not(@location)]">                 <ErrorNode>                     <xsl:attribute name="elementPos"><xsl:value-of select="position()"/></xsl:attribute>                     <xsl:copy-of select="."/>                 </ErrorNode>             </xsl:if>     </xsl:template> </xsl:stylesheet> The output from this is not pretty but it shows any <composite-series> tags that are missing expected attributes (name and default).  It also shows how many composites are in the file (111) and how many revisions of those composites (115). <?xml version="1.0" encoding="UTF-8"?> <testResult xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.w3.org/1999/xhtml">    <composite-series elementCount="111" nameAttributeCount="110" defaultAttributeCount="110">       <composite-revision elementCount="115" dnAttributeCount="114" stateAttributeCount="115"                           modeAttributeCount="115"                           locationAttributeCount="114">          <composite elementCount="115" dnAttributeCount="114" deployedTimeAttributeCount="115"/>       </composite-revision>       <ErrorNode elementPos="82">          <composite-series xmlns="">             <composite-revision state="on" mode="active">                <composite deployedTime="2010-12-15T11:50:16.067+01:00"/>             </composite-revision>          </composite-series>       </ErrorNode>    </composite-series> </testResult> From this I could see that one of the <composite-series> elements (number 82 of 111) seemed to be corrupt. Having found the problem I now needed to fix it. Fixing the Problem The solution was really quite easy.  First for safeties sake I took a backup of the exported MDS partition.  I then edited the deployed-composites/deployed-composites.xml file to remove the offending <composite-series> tag. Finally I restarted the SOA domain and was rewarded by seeing that the deployed composites were now visible. Summary One possible cause of not being able to see deployed composites after a SOA 11g system restart is a corrupt deployed-composites.xml file.  Retrieving this file from MDS, repairing it, and replacing it back into MDS can solve the problem.  This still leaves the problem of how did this file become corrupt!

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Using Oracle Enterprise Manager Ops Center to Update Solaris via Live Upgrade

  - by LeonShaner

  Introduction: This Oracle Enterprise Manager Ops Center blog entry provides tips for using Ops Center to update Solaris using Live Upgrade on Solaris 10 and Boot Environments on Solaris 11. Why use Live Upgrade? Live Upgrade (LU) can significantly reduce downtime associated with patching Live Upgrade avoids dropping to single-user mode for long periods of time during patching Live Upgrade relies on an Alternate Boot Environment (ABE)/(BE), which is patched while in multi-user mode; thereby allowing normal system operations to continue with the active BE, while the alternate BE is being patched Activating an newly patched (A)BE is essentially a reboot; therefore the downtime is ~= reboot Admins can easily revert to the prior Boot Environment (BE) as a safeguard / fallback. Why use Ops Center to patch via Live Upgrade, Alternate Boot Environments, and Solaris 11 equivalents? All the benefits of Ops Center's extensive patch and package knowledge base can be leveraged on top of Live Upgrade Ops Center can orchestrate patching based on Live Upgrade and Solaris 11 features, which all works together to minimize downtime Ops Centers advanced inventory and reporting features assurance that each OS is updated to a verifiable, consistent standard, rather than relying on ad-hoc (error prone) procedures and scripts Ops Center gives admins control over the boot environment specifications or they can let Ops Center decide when a BE is necessary, thereby reducing complexity and lowering the opportunity for user error Preparing to use Live Upgrade-like features in Solaris 11 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Solaris 11 has features which are similar in concept to Live Upgrade on Solaris 10, but differ greatly in implementationImportant distinctions: Solaris 11 assumes ZFS root Solaris 11 adds Boot Environments (BE's) as an integrated feature (see beadm) Solaris 11 BE's avoid single-user patching (vs. Solaris 10 w/ ZFS snapshot=ABE). Solaris 11 Image Packaging System (IPS) has hooks for BE creation, as needed Solaris 11 allows pkgs to be installed + upgraded in alternate BE (e.g. instead of the live system) but it is controlled on a per-pkg basis Boot Environments are activated across a reboot; instead of spending long periods installing + upgrading packages in single user mode. Fallback to a prior BE is a function of the BE infrastructure (a la beadm). (Generally) Reboot + BE activation can be much much faster on Solaris 11 Preparing to use Live Upgrade on Solaris 10 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Live Upgrade Pre-requisite patches must be applied before the first Live Upgrade Alternate Boot Environments are created (see "Pre-requisite Patches" section, below...) Solaris 10 Update 6 or newer on ZFS root is the practical starting point for Live Upgrade Live Upgrade with ZFS root is far more straight-forward than any scheme based on Alternative Boot Environments in slices or temporarily breaking mirrors Use Solaris best practices to upgrade the OS to at least Solaris 10 Update 4 (outside of Ops Center) UFS root can (technically) be used, but it is significantly more involved (e.g. discouraged) -- there are many reasons to move to ZFS while going through the process to update to Solaris 10 Update 6 or newer (out side of Ops Center) Recommendation: Start with Solaris 10 Update 6 or newer on ZFS root Recommendation: Start with Ops Center 12c or newer Ops Center 12c can automatically create your ABE's for you, without the need for custom scripts Ops Center 12c Update 2 avoids kernel panic on unpatched Solaris 10 update 9 (and older) -- unrelated to Live Upgrade, but more on the issue, below. NOTE: There is no magic!  If you have systems running Solaris 10 Update 5 or older on UFS root, and you don't know how to get them updated to Solaris 10 on ZFS root, then there are services available from Oracle Advanced Customer Support (ACS), which specialize in this area. Live Upgrade Pre-requisite Patches (Solaris 10) Certain Live Upgrade related patches must be present before the first Live Upgrade ABE's are created on Solaris 10.Use the following MOS Search String to find the “living document” that outlines the required patch minimums, which are necessary before using any Live Upgrade features: Solaris Live Upgrade Software Patch Requirements(Click above – the link is valid as of this writing, but search in MOS for the same "Solaris Live Upgrade Software Patch Requirements" string if necessary) It is a very good idea to check the document periodically and adapt to its contents, accordingly.IMPORTANT:  In case it wasn't clear in the above document, some direct patching of the active OS, including a reboot, may be required before Live Upgrade can be successfully used the first time.HINT: You can use Ops Center to determine what to expect for a given system, and to schedule the “pre-patching” during a maintenance window if necessary. Preparing to use Ops Center Discover + Manage (Install + Configure the Ops Center agent in) each Global Zone Recommendation:  Begin by using OCDoctor --agent-prereq to determine whether OS meets OC prerequisites (resolve any issues) See prior requirements and recommendations w.r.t. starting with Solaris 10 Update 6 or newer on ZFS (or at least Solaris 10 Update 4 on UFS, with caveats) WARNING: Systems running unpatched Solaris 10 update 9 (or older) should run the Ops Center 12c Update 2 agent to avoid a potential kernel panic The 12c Update 2 agent will check patch minimums and disable certain process accounting features if the kernel is not sufficiently patched to avoid the panic SPARC: 142900-05 Obsoleted by: 142900-06 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142901-05 Obsoleted by: 142901-06 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) OR SPARC: 142909-17 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142910-17 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) Ops Center 12c (initial release) and 12c Update 1 agent can also be safely used with a workaround (to be performed BEFORE installing the agent): # mkdir -p /etc/opt/sun/oc # echo "zstat_exacct_allowed=false" > /etc/opt/sun/oc/zstat.conf # chmod 755 /etc/opt/sun /etc/opt/sun/oc # chmod 644 /etc/opt/sun/oc/zstat.conf # chown -Rh root:sys /etc/opt/sun/oc NOTE: Remove the above after patching the OS sufficiently, or after upgrading to the 12c Update 2 agent Using Ops Center to apply Live Upgrade-related Pre-Patches (Solaris 10)Overview: Create an OS Update Profile containing the minimum LU-related pre-patches, based on the Solaris Live Upgrade Software Patch Requirements, previously mentioned. SIMULATE the deployment of the LU-related pre-patches Observe whether any of the LU-related pre-patches will require a reboot The job details for each Global Zone will advise whether a reboot step will be required ACTUALLY deploy the LU-related pre-patches, according to your change control process (e.g. if no reboot, maybe okay to do now; vs. must do later because of the reboot). You can schedule the job to occur later, during a maintenance window Check the job status for each node, resolving any issues found Once the LU-related pre-patches are applied, you can Ops Center to patch using Live Upgrade on Solaris 10 Using Ops Center to patch Solaris 10 with LU/ABE's -- the GOODS!(this is the heart of the tip): Create an OS Update Profile containing the patches that make up your standard build Use Solaris Baselines when possible Add other individual patches as needed ACTUALLY deploy the OS Update Profile Specify the appropriate Live Upgrade options, e.g. Synchronize the active BE to the alternate BE before patching Do not activate the BE after patching Check the job status for each node, resolving any issues found Activate the newly patched BE according to your change control process Activate = Reboot to the ABE, making the ABE the new active BE Ops Center does not separate LU activate from reboot, so expect a reboot! Check the job status for each node, resolving any issues found Examples (w/Screenshots) Solaris 10 and Live Upgrade: Auto-Create the Alternate Boot Environment (ZFS root only) ABE to be created on ZFS with name S10_12_07REC (Example) Uses built in feature to call “lucreate -n S10_12_07REC” behind scenes if not already present NOTE: Leave “lucreate” params blank (if you do specify options, the will be appended after -n $ABEName) Solaris 10 and Live Upgrade: Alternate Boot Environment Creation via Operational Profile (script) The Alternate Boot Environment is to be created via custom, user-supplied script, which does whatever is needed for the system where Live Upgrade will be used. Operational Profile, which provides the script to create an ABE: Very similar to the automatic case, but with a Script (Operational Profile), which is used to create the ABE Relies on user-supplied script in the form of an Operational Profile Could be used to prepare an ABE based on a UFS root in a slice, or on a separate device (e.g. by breaking a mirror first) – it is up to the script author to do the right thing! EXAMPLE: Same result as the ZFS case, but illustrating the Operational Profile (e.g. script) approach to call: # lucreate -n S10_1207REC NOTE: OC special variable is $ABEName Boot Environment Profile, which references the Operational Profile Script = Operational Profile on this screen Refers to Operational Profile shown in the previous section The user-supplied S10_Create_BE Operational Profile will be run The Operational Profile must send a non-zero exit code if there is a problem (so that the OS Update job will not proceed) Solaris 10 OS Update Profile (to provide the actual patch specifications) Solaris 10 Baseline “Recommended” chosen for “Install” Solaris 10 OS Update Plan (two-steps in this case) “Create a Boot Environment” + “Update OS” are chosen. Using Ops Center to patch Solaris 11 with Boot Environments (as needed) Create a Solaris 11 OS Update Profile containing the packages that make up your standard build ACTUALLY deploy the Solaris 11 OS Update Profile BE will be created if needed (or you can stipulate no BE) BE name will be auto-generated (if needed), or you may specify a BE name Check the job status for each node, resolving any issues found Check if a BE was created; if so, activate the new BE Activate = Reboot to the BE, making the new BE the active BE Ops Center does not separate BE activate from reboot NOTE: Not every Solaris 11 OS Update will require a new BE, so a reboot may not be necessary. Solaris 11: Auto BE Create (as Needed -- let Ops Center decide) BE to be created as needed BE to be named automatically Reboot (if necessary) deferred to separate step Solaris 11: OS Profile Solaris 11 “entire” chosen for a particular SRU Solaris 11: OS Update Plan (w/BE)  “Create a Boot Environment” + “Update OS” are chosen. Summary: Solaris 10 Live Upgrade, Alternate Boot Environments, and their equivalents on Solaris 11 can be very powerful tools to help minimize the downtime associated with updating your servers.  For very old Solaris, there are some important prerequisites to adhere to, but once the initial preparation is complete, Live Upgrade can be used going forward.  For Solaris 11, the built-in Boot Environment handling is leveraged directly by the Image Packaging System, and the result is a much more straight forward way to patch, and far fewer prerequisites to satisfy in getting there.  Ops Center simplifies using either approach, and helps you improve consistency from system to system, which ultimately helps you improve the overall up-time across all the Solaris systems in your environment. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• CodePlex Daily Summary for Tuesday, December 14, 2010

  CodePlex Daily Summary for Tuesday, December 14, 2010Popular ReleasesFlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperWebSocket: SuperWebSocket Drop 2: Changes: based on SuperSocket 1.3 supported sub protocol supported SSL/TLS encryption (wss) in Sync socket mode fixed some data communication bugsSSH.NET Library: 2010.12.13: Fixes SFTP issue when you try to uploaded or download multiple files simultaneously. Usage example can be found hereRequest Tracker Data Access: 1.0.0.0: First releaseSQL Monitor: SQL Monitor 2.4: 1. auto adjust datagrids in query 2. disable activities related commands until activities tab is active.SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 1: SuperSocket 1.3 is built on .NET 4.0 framework. Bug fixes: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value Third-part library upgrades: upgraded SuperSocket to .NET 4.0 upgraded EntLib 4.1 to 5.0 New features: supported UDP socket support custom protocol (can support binary protocol and other complecate...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.SwapWin: SwapWin 0.2: Updates: Bring all windows that are swapped to foreground. Make the window sent to primary screen active.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.New ProjectsAugmented Reality system in Soccer video: Augmented reality system and camera calibration system in soccer videos based on homography and vanishing points. Code generated with Visual C++ (best compiler is .net)Database Schema Provider: Database Schema Provider gets a database schema in unified format independent on the type of database. It uses ADO.NET data provider for Entity Framework. Dicke Bertha: Many many cool features... DNN Bookmark: DNN Bookmarks is a DNN module that aggregates the most popular social bookmarking tools and also allows you to bookmark your DNN web siteDough: Dough is a UI starter kit built using ASP.Net MVC and ExtJS. It's name comes from the concept of Amish friendship bread, a type of bread or cake made from a sourdough starter that is often shared in a manner similar to a chain letter.Garra - Gerenciador Financeiro: Garra é um sistema completo de controle financeiro: contas a pagar, contas a receber, investimentos, etc...ghcwp7: ghcwp7Hackathon - DotNetNuke Razor User Locator: The DotNetNuke Razor User Locator module demonstrates how Razor can be used to author DNN modules. This module shows where recent users to a web site came from based on their IP address. Hackathon. DotNetNuke Razor. Flickr Badge: Flickr badge desktop module allows you to display image thumbnails from Flickr and preview them inside DotNetNuke or on Flickr (controlled by module settings). Image thumbnails can be loaded by tag, user id, user group id, user set id and more.Hackathon: Razor Youtube Gallery: This is a DotNetNuke module which allows a website admin to add several relevant Youtube videos to a pane. The end user watches the selected Youtube video play, while scrolling through thumbnails of other videos to play those without refreshing the page. jQuery UI MVC3 Demo: Demo and possibly a skeleton for using jQuery UI in MVC3 (currently RC2).Microsoft Office Communicator History manager: Needs to save conversation history just on the local workstation (folder) then application could redstore it and show in simple window (mode) or user could open folder and lock on it manuallyMSTest Extensions - Msbuild: This project contains various msbuild tasks that extend helps with test execution using Mcrosoft testing frameworkRayCharlesTracer: this is a scholar project for a raytracer.Refunctor: F# interactive inside Reflector.Request Tracker Data Access: Best Practical RT (Request Tracker) data access .NET library for REST interface.SurfzApp: An application that does data mining on web resources of interest for Swedish windsurfers...Tesseract Solutions Corp. Data Access Base: Tesseract Data Access speeds up data access in .Net projects. Developed in C# .Net 4. It is a C#, class based ORM.TimBazinga EVoting: Undergrad project - designing an e-voting software system.Tiny Library CQRS: Tiny Library CQRS is a small demonstration project which demonstrates the concept of Domain Driven Design and the CQRS architecture pattern. This project relies on the Apworks DDD framework.Toptoys: toptoysWebGroup: WebGroup makes it easier for your website members to comunicate online. It work like Web IM + Forum + Twitter. It can be easily used in your current project. Developed in C#.WpfCustomChromeLibrary: WpfCustomChromeLibrary makes it easier to create WPF applications with custom chrome and caption buttons (min/max/close). You'll no longer have to do all the dirty work yourself in each application where you want a custom chrome. It's developed in XAML and C#.

  Read the article

• Can't add Fedora 14 to grub.

  - by Dananjaya

  Today I installed Fedora 14 in a different partition in the same hard drive as Ubuntu. At the Fedora 14 installation, I chose not to install Boot-loader in the MBR, and instead chose to install it in the Fedora partition itself, which is according to my HD layout /sda3. After the Fedora 14 installation I booted in to Ubuntu and ran sudo update-grub but 'grub.cfg' fails to add Fedora 14 in to the OS list. Here is the output of boot-info script. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda3: __________________________________________________________________________ File system: ext4 Boot sector type: Grub Legacy Boot sector info: Grub Legacy (v0.97) is installed in the boot sector of sda3 and looks at sector 49897340 on boot drive #1 for the stage2 file. A stage2 file is at this location on /dev/sda. Stage2 looks on partition #3 for /grub/grub.conf. Operating System: Boot files: /grub/menu.lst /grub/grub.conf sda4: __________________________________________________________________________ File system: LVM2_member Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 49,865,759 49,863,712 83 Linux /dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended /dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris /dev/sda3 49,866,752 50,890,751 1,024,000 83 Linux /dev/sda4 50,890,752 74,864,639 23,973,888 8e Linux LVM "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 03e2a8da-171f-49e9-b24d-434e66cd1140 ext4 /dev/sda3 dea81d77-a375-4d0e-954e-1829f6b91f10 ext4 /dev/sda4 mzVoj0-GHJu-DJr4-0G2Y-SzZ0-LTfW-F01yf9 LVM2_member /dev/sda5 3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,user_xattr,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="2" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation # Commented out by Dropbox # UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 none swap sw 0 0 UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro,user_xattr 0 1 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 0.065803528 = 0.070656000 boot/grub/core.img 1 21.263332367 = 22.831329280 boot/grub/grub.cfg 1 0.771381378 = 0.828264448 boot/initrd.img-2.6.31-wl 1 2.054199219 = 2.205679616 boot/initrd.img-2.6.32-21-generic 3 2.893260956 = 3.106615296 boot/initrd.img-2.6.35-28-generic 2 6.833232880 = 7.337127936 boot/initrd.img-2.6.38-8-generic 2 1.772453308 = 1.903157248 boot/vmlinuz-2.6.32-21-generic 2 2.068012238 = 2.220511232 boot/vmlinuz-2.6.35-28-generic 1 5.532531738 = 5.940510720 boot/vmlinuz-2.6.38-8-generic 1 6.833232880 = 7.337127936 initrd.img 2 2.893260956 = 3.106615296 initrd.img.old 2 5.532531738 = 5.940510720 vmlinuz 1 2.068012238 = 2.220511232 vmlinuz.old 1 ============================= sda3/grub/grub.conf: ============================= -------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,2) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda3 default=0 timeout=0 splashimage=(hd0,2)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.6-45.fc14.i686) root (hd0,2) kernel /vmlinuz-2.6.35.6-45.fc14.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /initramfs-2.6.35.6-45.fc14.i686.img -------------------------------------------------------------------------------- =================== sda3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 23.792903900 = 25.547436032 grub/grub.conf 1 23.792903900 = 25.547436032 grub/menu.lst 1 23.793020248 = 25.547560960 grub/stage2 1 23.817364693 = 25.573700608 initramfs-2.6.35.6-45.fc14.i686.img 2 23.787566185 = 25.541704704 initrd-plymouth.img 1 23.791228294 = 25.545636864 vmlinuz-2.6.35.6-45.fc14.i686 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda2 00000000 81 71 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.qb.....MC:.....| 00000010 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000020 5d 56 50 ff a1 94 89 ff 81 70 62 ff 81 70 62 ff |]VP......pb..pb.| 00000030 81 70 62 ff 81 70 62 ff 81 70 62 ff a1 94 89 ff |.pb..pb..pb.....| 00000040 4d 43 3a ff fa f2 ec ff fb f6 f1 ff fc f8 f4 ff |MC:.............| 00000050 fc f8 f4 ff fc f8 f4 ff 5d 56 50 ff a1 94 89 ff |........]VP.....| 00000060 81 70 62 ff 81 70 62 ff 81 70 62 ff 81 70 62 ff |.pb..pb..pb..pb.| 00000070 81 70 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.pb.....MC:.....| 00000080 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000090 5d 56 50 ff a0 93 89 ff 80 6f 61 ff 80 6f 61 ff |]VP......oa..oa.| 000000a0 80 6f 61 ff 80 6f 61 ff 80 6f 61 ff a0 93 89 ff |.oa..oa..oa.....| 000000b0 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000000c0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9f 93 88 ff |........]VP.....| 000000d0 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff |.o`..o`..o`..o`.| 000000e0 7f 6f 60 ff 9f 93 88 ff 4d 43 3a ff fa f2 ed ff |.o`.....MC:.....| 000000f0 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000100 5d 56 50 ff 9f 93 88 ff 7f 6f 60 ff 7f 6f 60 ff |]VP......o`..o`.| 00000110 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 9f 93 88 ff |.o`..o`..o`.....| 00000120 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 00000130 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 00000140 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff |~n`.~n`.~n`.~n`.| 00000150 7e 6e 60 ff 9e 92 88 ff 4d 43 3a ff fa f2 ed ff |~n`.....MC:.....| 00000160 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000170 5d 56 50 ff 9e 92 88 ff 7d 6d 5f ff 7d 6d 5f ff |]VP.....}m_.}m_.| 00000180 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 9e 92 88 ff |}m_.}m_.}m_.....| 00000190 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000001a0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 000001b0 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 7d 6d 00 fe |}m_.}m_.}m_.}m..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== unlzma: Decoder error According to this Fedora 14 is visible in sda3. Does anybody know a way to add Fedora 14 to grub.cfg of Ubuntu so I can choose which OS to boot? Thanks in advance.

  Read the article

• Additional options in MDL

  - by Jane Zhang

      The Metadata Loader(MDL) enables you to populate a new repository as well as transfer, update, or restore a backup of existing repository metadata. It consists of two utilities: metadata export and metadata import. The export utility extracts metadata objects from a repository and writes the information into a file. The import utility reads the metadata information from an exported file and inserts the metadata objects into a repository.      While the Design Client provides an intuitive UI that helps you perform the most commonly used export and import tasks, OMBPlus scripting enables you to specify some additional options, and manage a control file that allows you to perform more specialized export and import tasks. Is it possible to utilize these options in MDL from Design Client? This article will tell you how to achieve it.      A property file named mdl.properties is used to configure the additional options. It stores options in name/value pairs. This file can be created and placed under the directory <owb installation path>/owb/bin/admin/. Below we will introduce the options that can be specified in the mdl.properties file. 1. DEFAULTDIRECTORY     When we open a Metadata Export/Import dialog in Design Client, a default directory is provided for MDL file and log file. For MDL Export, the default directory is <owb installation path>/owb/bin/. As for MDL Import, the default directory is <owb installation path>/owb/mdl/. It may not be the one you would want to use as a default. You can specify the option DEFAULTDIRECTORY in the mdl.properties file to set your own default directory for MDL Export/Import, for example, DEFAULTDIRECOTRY=/tmp/     In this example, the default directory is set to /tmp/. Be sure the value ends with a file separator since it represents a directory. In Windows, the file separator is “\”. In linux, the file separator is “/”. 2. MDLTRACEFILE     Sometimes we would like to trace the whole process of MDL Export/Import, and get detailed information about operations to help developers or supports troubleshooting. To turn on MDL trace, set the option MDLTRACEFILE in the mdl.properties file. MDLTRACEFILE=/tmp/mdl.trc    The right side of the equals sign is to specify the name of the file for MDL trace information to be written. If no path is specified, the file will be placed under directory <owb installation path>/owb/bin/admin/. However, the trace file may be large if the MDL file contains a large number of metadata objects, so please use this option sparingly. 3. CONTROLFILE       We can use a control file to specify how objects are imported or exported. We can set an option called CONTROLFILE in the mdl.properties file, so the control file can also be utilized in Design Client, for example, CONTROLFILE=/tmp/mdl_control_file.ctl     The control file stores options in name/value pairs. When using control file, be sure the file exists, otherwise an exception java.lang.Exception: CNV0002-0031(ERROR): Cannot find specified file will be thrown out during MDL Export/Import.      Next we will introduce some options specified in control file. ZIPFILEFORMAT     By default, MDL exports objects into a zip format file. This zip file has an .mdl extension and contains two files. For example, you export the repository metadata into a file called projects.mdl. When you unzip this MDL file, you obtain two files. The file projects.mdx contains the repository objects. The file mdlcatalog.xml contains internal information about the MDL XML file. Another choice is to combine these two files into one unzip text format file when doing MDL exporting.    In OMBPlus command related to MDL, there is an option called FILE_FORMAT which is used to specify the file format for the exported file. Its acceptable values are ZIP or TEXT. When the value TEXT is selected, the exported file is in text format, for example, OMBEXPORT MDL_FILE '/tmp/options_file_format_test.mdl' FILE_FORMAT TEXT FROM PROJECT 'MY_PROJECT'    How to achieve this via Design Client when doing an MDL exporting? Here we have another option called ZIPFILEFORMAT which has the same function as the FILE_FORMAT. The difference is the acceptable values for ZIPFILEFORMAT are Y or N. When the value is set to N, the exported file is in text format, otherwise it is in zip file format. LOGMESSAGELEVEL     Whenever you export or import repository metadata, MDL writes diagnostic and statistical information to a log file. Their are 3 types of status messages: Informational, Warning and Error. By default, the log file includes all types of message. Sometimes, user may only care about one type of messages, for example, they would like only error messages written to the log file. In order to achieve this, we can set an option called LOGMESSAGELEVEL in control file. The acceptable values for LOGMESSAGELEVEL are ALL, WARNING and ERROR. ALL: If the option LOGMESSAGELEVEL is set to ALL, all types of messages (Informational, Warning and Error) will be written into the log file. WARNING: If the option LOGMESSAGELEVEL is set to WARNING, only warning messages will be written into log file. ERROR: If the option LOGMESSAGELEVEL is set to ERROR, only error messages will be written into log file. UPDATEPROJECTATTRIBUTES, UPDATEMODULEATTRIBUTES      These two options are used to decide whether updating the attributes of projects/modules. The options work when projects/modules being imported already exist in repository and we use update metadata mode or replace metadata mode to do the MDL import. The acceptable values for these two options are Y or N. If the value is set to Y, the attributes of projects/modules will be updated, otherwise not.      Next, let’s give an example to see how these options take effect in MDL. 1. First of all, create the property file mdl.properties under the directory <owb installation path>/owb/bin/admin/. 2. Specify the options in the mdl.properties file, see the following screenshot. 3. Create the control file mdl_control_file.ctl under the directory /tmp/. Set the following options in control file. 4. Log into the OWB Design Client. 5. Create an Oracle module named ORA_MOD_1 under the project MY_PROJECT, then export the project MY_PROJECT into file my_project.mdl. 6. Check the trace file mdl.trc under the directory /tmp/. In this file, we can see very detail information for the above export task. 7. Check the exported MDL file. The file my_project.mdl is in text format. Opening the file, you can see the content of the file directly. It concats the file my_project.mdx and mdlcatalog.xml. 8. Modify the project MY_PROJECT and Oracle module ORA_MOD_1, add descriptions for them separately. Delete the location created in step 5. 9. Import the MDL file my_project.mdl. From the Metadata Import dialog, we can see the default directory for MDL file and log file has been changed to /tmp/. Here we use update metadata mode, match by names to do the importing. 10. After importing, check the description of the project MY_PROJECT, we can see the description is still there. But the description of the Oracle module ORA_MOD_1 has gone. That because we set the option UPDATEPROJECTATTRIBUTES to N, and set the option UPDATEMODULEATTRIBUTES to Y. 11. Check the log file, the log file only contains warning messages and the log message level is set to WARNING.      For more details about the 3 types of status messages, see Oracle® Warehouse Builder Installation and Administration Guide11g Release 2.

  Read the article

• Updating a SharePoint master page via a solution (WSP)

  - by Kelly Jones

  In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package.  As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint.  You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page.  Manually uploading your master page to the master page gallery might be the best option, depending on your environment.  For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages.  Are they using the SharePoint dynamic token or the static token for the master page reference?  The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update.  So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery.  If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page.  In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token.  Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver.  For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case.  You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in.  I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5:   6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7:   8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24:   25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29:   30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42:   43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48:   49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54:   55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56:   57: FileStream fs = File.OpenRead(filePath); 58:   59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60:   61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75:   76: } 77:   78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85:   86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89:   90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102:   103: return curweb; 104: } This did the trick.  It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!).  I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

  Read the article

• Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

  - by arungupta

  TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr  9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr  9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr  9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr  9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr  9 12:56:02 [initandlisten] options: {}Mon Apr  9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr  9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr  9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr  9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&amp;nf=1&amp;file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository>  </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7  Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

  Read the article

• VLC 2.0.3 on Lubuntu 12.04: No audio?

  - by drezabek

  I am on Lubuntu 12.04, and I have installed VLC media player version 2.0.3. When I try and play an audio file, it appears to load fine, and the media position bar displays the progress, and it says it is playing, but I can't here any thing through my speakers. I can hear game audio, web audio, and audio from SMPlayer just fine, but with VLC, I can't here anything. Below is the "Messages" output with the verbosity option set to "2 (debug)" main debug: processing request item: The Bottom, node: Playlist, skip: 0 main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: starting playback of the new playlist item main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: creating new input thread main debug: Creating an input for 'The Bottom' main debug: TIMER input launching for 'Floex - Machinarium Soundtrack - 01 The Bottom.flac' : 23.706 ms - Total 23.706 ms / 1 intvls (Avg 23.706 ms) main debug: using timeshift granularity of 50 MiB, in path '/tmp' main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' gives access `file' demux `' path `/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access_demux module: 3 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 2.332 ms - Total 2.332 ms / 1 intvls (Avg 2.332 ms) main debug: creating access 'file' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac', path='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access module: 2 candidates filesystem debug: opening file `/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.762 ms - Total 0.762 ms / 1 intvls (Avg 0.762 ms) main debug: Using stream method for AStream* main debug: starting pre-buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 43478 KiB/s main debug: looking for stream_filter module: 7 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.236 ms - Total 0.236 ms / 1 intvls (Avg 0.236 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for demux module: 54 candidates flacsys debug: Picture type=3 mime=image/png description='' file length=679371 qt4 debug: IM: Setting an input main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_flac" main debug: TIMER module_need() : 0.211 ms - Total 0.211 ms / 1 intvls (Avg 0.211 ms) main debug: using demux module "flacsys" main debug: TIMER module_need() : 4.023 ms - Total 4.023 ms / 1 intvls (Avg 4.023 ms) main debug: looking for a subtitle file in /home/doug/Music/unsorted/Floex - Machinarium Soundtrack/ main debug: looking for meta reader module: 2 candidates main debug: using meta reader module "taglib" main debug: TIMER module_need() : 5.245 ms - Total 5.245 ms / 1 intvls (Avg 5.245 ms) main debug: removing module "taglib" main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' successfully opened main debug: selecting program id=0 main debug: looking for decoder module: 30 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.442 ms - Total 0.442 ms / 1 intvls (Avg 0.442 ms) main debug: Buffering 0% flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: Buffering 30% main debug: recycling audio output main debug: looking for audio output module: 3 candidates main debug: Buffering 61% pulse debug: using stereo channel map pulse debug: using library version 1.1.0 pulse debug: (compiled with version 1.1.0, protocol 26) main debug: Buffering 92% main debug: Stream buffering done (371 ms in 2 ms) pulse debug: connected locally to unix:/home/doug/.pulse/dce22254e867f905188a2ce200000003-runtime/native as client #14 pulse debug: using protocol 26, server protocol 26 pulse debug: using buffer metrics: maxlength=4194304, tlength=9880, prebuf=0, minreq=3528 pulse debug: connected to sink 0: alsa_output.pci-0000_00_14.2.analog-stereo main debug: using audio output module "pulse" main debug: TIMER module_need() : 4.571 ms - Total 4.571 ms / 1 intvls (Avg 4.571 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.187 ms - Total 0.187 ms / 1 intvls (Avg 0.187 ms) main debug: conversion pipeline completed main debug: looking for audio mixer module: 2 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.125 ms - Total 0.125 ms / 1 intvls (Avg 0.125 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.233 ms - Total 0.233 ms / 1 intvls (Avg 0.233 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo pulse debug: listing sink alsa_output.pci-0000_00_14.2.analog-stereo (0): Built-in Audio Analog Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms) main debug: conversion pipeline completed pulse debug: base volume: 65536 main debug: looking for audio filter module: 1 candidate equalizer debug: equalizer loaded for 44100 Hz with 10 bands 2 pass equalizer debug: 60 Hz -> factor:0.000000 alpha:0.003013 beta:0.993973 gamma:1.993901 equalizer debug: 170 Hz -> factor:0.000000 alpha:0.008490 beta:0.983019 gamma:1.982437 equalizer debug: 310 Hz -> factor:0.000000 alpha:0.015374 beta:0.969252 gamma:1.967331 equalizer debug: 600 Hz -> factor:0.000000 alpha:0.029328 beta:0.941343 gamma:1.934254 equalizer debug: 1000 Hz -> factor:0.000000 alpha:0.047918 beta:0.904163 gamma:1.884869 equalizer debug: 3000 Hz -> factor:0.000000 alpha:0.130408 beta:0.739184 gamma:1.582718 equalizer debug: 6000 Hz -> factor:0.000000 alpha:0.226555 beta:0.546889 gamma:1.015267 equalizer debug: 12000 Hz -> factor:0.000000 alpha:0.344937 beta:0.310127 gamma:-0.181410 equalizer debug: 14000 Hz -> factor:0.000000 alpha:0.366438 beta:0.267123 gamma:-0.521151 equalizer debug: 16000 Hz -> factor:0.000000 alpha:0.379009 beta:0.241981 gamma:-0.808451 main debug: using audio filter module "equalizer" main debug: TIMER module_need() : 0.353 ms - Total 0.353 ms / 1 intvls (Avg 0.353 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: looking for visualization2 module: 1 candidate main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 3.278 ms - Total 3.278 ms / 1 intvls (Avg 3.278 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: RGBA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.037 ms - Total 1.037 ms / 1 intvls (Avg 1.037 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: Opening vout display wrapper main debug: looking for vout display module: 6 candidates main debug: looking for vout window xid module: 4 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window xid module "qt4" main debug: TIMER module_need() : 61.671 ms - Total 61.671 ms / 1 intvls (Avg 61.671 ms) main debug: looking for inhibit module: 2 candidates main debug: using inhibit module "xdg_screensaver" main debug: TIMER module_need() : 0.336 ms - Total 0.336 ms / 1 intvls (Avg 0.336 ms) xdg_screensaver debug: started xdg-screensaver (PID = 6682) xcb_xv debug: connected to X11.0 server xcb_xv debug: vendor : The X.Org Foundation xcb_xv debug: version: 11103000 xcb_xv debug: using screen 0x15a xcb_xv debug: using XVideo extension v2.2 xcb_xv debug: using adaptor NV17 Video Texture xcb_xv debug: using port 310 xcb_xv debug: using image format 0x30323449 xcb_xv debug: using X11 visual ID 0x21 (depth: 24) xcb_xv debug: using X11 window 0x03400000 xcb_xv debug: using X11 graphic context 0x03400002 main debug: VoutDisplayEvent 'fullscreen' 0 main debug: VoutDisplayEvent 'resize' 800x500 window main debug: using vout display module "xcb_xv" main debug: TIMER module_need() : 69.890 ms - Total 69.890 ms / 1 intvls (Avg 69.890 ms) main debug: original format sz 800x500, of (0,0), vsz 800x500, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: removing module "freetype" main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 4.552 ms - Total 4.552 ms / 1 intvls (Avg 4.552 ms) main debug: using visualization2 module "visual" main debug: TIMER module_need() : 84.104 ms - Total 84.104 ms / 1 intvls (Avg 84.104 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "samplerate" main debug: TIMER module_need() : 0.375 ms - Total 0.375 ms / 1 intvls (Avg 0.375 ms) main debug: conversion pipeline completed main debug: End of audio preroll main debug: Decoder buffering done in 91 ms main warning: PTS is out of range (-9269), dropping buffer pulse debug: deferring start (190703 us) main debug: looking for video blending module: 1 candidate main debug: using video blending module "blend" main debug: TIMER module_need() : 0.275 ms - Total 0.275 ms / 1 intvls (Avg 0.275 ms) main debug: Detected interlaced video main debug: deinterlace 0, mode blend, is_needed 1 xcb_xv debug: display is visible pulse debug: starting deferred pulse warning: too late by 93760 us pulse debug: changed sample rate to 44186 Hz pulse debug: started pulse warning: too late by 94474 us pulse debug: changed sample rate to 44229 Hz pulse warning: too late by 93532 us pulse debug: changed sample rate to 44272 Hz pulse warning: too late by 92829 us pulse debug: changed sample rate to 44315 Hz pulse warning: too late by 92132 us pulse debug: changed sample rate to 44358 Hz xcb_xv debug: display is visible pulse warning: too late by 91534 us pulse debug: changed sample rate to 44401 Hz xcb_xv debug: display is visible pulse warning: too late by 89482 us pulse debug: changed sample rate to 44440 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible pulse warning: too late by 87529 us pulse debug: changed sample rate to 44479 Hz pulse warning: too late by 84577 us pulse debug: changed sample rate to 44504 Hz main debug: auto hiding mouse cursor pulse warning: too late by 78562 us pulse debug: changed sample rate to 44492 Hz pulse warning: too late by 68015 us pulse debug: changed sample rate to 44422 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor pulse debug: changed sample rate to 44336 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor I have had issues with VLC in the past- the audio quality was extremely crackly, as if the headphone jack was plugged in only half way, and the sounds were extremely sharp and caused my speakers to make a ringing/vibrating noise... It would eventually start working after I messed around with the audio settings, but it happened every restart. I eventually switched to SMPlayer, but now I need some of the features that VLC offers, but I still can't use VLC. At this point, the audio can not be heard at all, and the method I used before, messing around with the audio settings, isn't getting me anywhere. (note, I reposted this on VideoLan's forums, link is here: http://forum.videolan.org/viewtopic.php?f=13&t=104726) Please let me know if you need more information, or are confused by something I posted! Thanks!

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

  Read the article

• CodePlex Daily Summary for Monday, May 31, 2010

  CodePlex Daily Summary for Monday, May 31, 2010New ProjectsAndrew's XNA Helpers: A collection of simple, yet useful methods and ways of accessing crucial variables such as the ContentManager or SpriteBatch from anywhere in your ...BASIC-DOS: BASIC-DOS OS Makes It Easier For People To Use DOS As It Comes With An Graphical User Interface That Loads Up During Boot Up. No Need To Type Any C...Chirpy - Visual Studio Add In For Handling Js, Css, and DotLess Files: Mashes, minifies, and validates your javascript, stylesheet, and dotless files.fprparser: Fortify XML Report parser in the form of an Excel Add-inHL7ToXmlConverter: Class library to transform HL7 Version 2.x to HL7Xml Version 2 depends on the used HL7 grammar.imdb movie downloader: basically download info from imdb and it s realy FAST ! need some development about thread pooling and webclient issues.. just try ;) for it run ...IMIfmoOptimisation: Задание по оптимизацииMarketView: MarketViewMediaStreamSources: 这是 CodePlex 上第一个可以呈现视频的 MediaStreamSource 项目。Migrate User Profile Values: A tool to move values between SharePoint 2007 User Profiles. The console application MigrateUserProfileValues.exe will export User Profile values ...Nexus6Studio Development Space: This is a working repository for development efforst of the Nexus6studio team.Project BlueLabel: BlueLabelSergioTools: SergioTools is a collection of tools and sample codes to help C# developers to improve your productivity and skills.SharePoint Property Bag Settings 2010: The Property Bag Settings can store any metadata as Key-Value pairs such as connection strings, server names, file paths, and other miscellaneous s...Silverlight Isolated Storage Cache: IsoCache is a small framework the make it easy to store dll's and xap files in the isolated storage so they can be use to speed up the startup of t...StackPivot: StackPivot is an app which can generate Microsoft Pivot "Collections" on-the-fly based on the data collected from the Stack Exchange APIs. Its d...Suspension Calculator: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...TFS Timesheets: A custom work item control for Team Foundation Server that allows timesheet data to be captured against a work item.Umbraco Membership infrastructure: Improvements to the Umbraco membership API implemented as a package. Includes user properties and improved membership API support.VolgaTransTelecomClient: VolgaTransTelecomClient makes it easier for clients of "Volga TransTelecom" company to get info about account. It's developed in C#.Wouter's SharePoint Demo Land: This site contains many of the SharePoint demos that I create while training or hobbying, both for the 2007 and the 2010 release. Please click the...New ReleasesAgUnit - Silverlight unit testing with ReSharper: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1-ReSharper5.0.zip into the "Bin\Plugins\" folder of your ReSharper installatio...Andrew's XNA Helpers: Andrew's XNA Helpers v1: My first version of my Library of XNA Helpers. Includes: Variables class - A static class that can be accessed anywhere throughout your project -...Clean your Database: Database Cleaner Setup: Database Cleaner SetupClean your Database: Database Cleaner Source: Database Cleaner Source codeCommunity Forums NNTP bridge: Community Forums NNTP Bridge V16: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V17: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release is prim...Folder Bookmarks: Folder Bookmarks 1.5.8: The latest version of Folder Bookmarks (1.5.8), with new GUI improvements and 'Help' feature - all the instructions needed to use the software (If ...HL7ToXmlConverter: HL7ToXmlConverter Version 0.0.0.9: First distribution on codepleximdb movie downloader: 0.9 Fist Tryout of MyImdb SourceCode: Fist Tryout of MyImdb SourceCodeLightweight Fluent Workflow: Objectflow 1.0.0.2: The features of this release take advantage of .Net 3.5 featrures; Lamda support is back for Constraints and Functions can now be used in workflows...MDownloader: MDownloader-0.15.16.59384: Fixed password detector in context of .rar files. Fixed FileFactory provider implementation. Fixed detection of internet connection failures.MediaStreamSources: MediaStreamSources 1.0 Beta1: 1.0 Beta1Mongodb Management Studio: Mongodb Management Studio v1.1: MongodbManagementStudio v1.1 1.服务器管理功能 添加服务器,删除服务器 2.服务器,数据库,表,列,索引,树形显示和状态信息查看 3.查询分析器功能. 支持select,insert,Delete,update 支持自定义分页函数 $rowid(1,5) 查询...Multiplayer Quiz: Release 1_7_1_0: Latest Release. .NET 4.0 required to run server, and recommended for client. Download: http://www.microsoft.com/downloads/details.aspx?FamilyID=9cf...SCSM PowerShell Cmdlets: SCSM PowerShell Cmdlets Version 0.1.1: First release! This is a minimal build with limited funcitonallity. Should be handled as a preview of what's to come. Included Cmdlets are: New-...SharePoint Property Bag Settings 2010: PropertyBagSettings2010.wsp: The SharePoint Property Bag Settings is a reusable component that you can include in your own SharePoint applications. It can store simple types, s...Sharp Tests Ex: Sharp Tests Ex 1.0.0RTM: Project Description #TestsEx (Sharp Tests Extensions) is a set of extensible extensions. The main target is write short assertions where the Visual...Silverlight Testing Automation Tool: StatLight V1.1: FeaturesApplied some UnitDriven specific changes from justncase80/StatLight Updated to the 0.0.5 release over on rul:UnitDriven.codeplex.com Upda...SQL Server 2005 and 2008 - Backup, Integrity Check and Index Optimization: 30 May 2010: This is the latest version of my solution for Backup, Integrity Check and Index Optimization in SQL Server 2005, SQL Server 2008 and SQL Server 200...Suspension Calculator: SuspensionCalculator_V1.0.0.29: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...Svn2Svn: copy, sync, replay or reflect changes across SVN repositories: 1.2 (Beta): Build 1.2.8932.0. Added /incremental (/i) mode, svn2svn detects all previously synced revisions and starts at the latest revision that has not bee...VCC: Latest build, v2.1.30530.0: Automatic drop of latest buildVolgaTransTelecomClient: V.1.0.2.0: v.1.0.2.0 releaseWatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.01: changes CSS Fixed for the Microsoft Internet ExplorerWouter's SharePoint Demo Land: Navigation Service Basic: This sample shows how to create a simple Service Application for SharePoint 2010. You can read up on the how and why on my blog series about Serv...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsCommunity Forums NNTP bridgeAStar.netpatterns & practices – Enterprise LibraryBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationMirror Testing SystemIonics Isapi Rewrite FilterCustomer Portal Accelerator for Microsoft Dynamics CRMN2 CMSpatterns & practices: Windows Azure Security Guidance

  Read the article

• CEN/CENELEC Lacks Perspective

  - by trond-arne.undheim

  Over the last few months, two of the European Standardization Organizations (ESOs), CEN and CENELEC have circulated an unfortunate position statement distorting the facts around fora and consortia. For the benefit of outsiders to this debate, let's just say that this debate regards whether and how the EU should recognize standards and specifications from certain fora and consortia based on a process evaluating the openness and transparency of such deliverables. The topic is complex, and somewhat confusing even to insiders, but nevertheless crucial to the European economy. As far as I can judge, their positions are not based on facts. This is unfortunate. For the benefit of clarity, here are some of the observations they make: a)"Most consortia are in essence driven by technology companies making hardware and software solutions, by definition very few of the largest ones are European-based". b) "Most consortia lack a European presence, relevant Committees, even those that are often cited as having stronger links with Europe, seem to lack an overall, inclusive set of participants". c) "Recognising specific consortia specifications will not resolve any concrete problems of interoperability for public authorities; interoperability depends on stringing together a range of specifications (from formal global bodies or consortia alike)". d) "Consortia already have the option to have their specifications adopted by the international formal standards bodies and many more exercise this than the two that seem to be campaigning for European recognition. Such specifications can then also be adopted as European standards." e) "Consortium specifications completely lack any process to take due and balanced account of requirements at national level - this is not important for technologies but can be a critical issue when discussing cross-border issues within the EU such as eGovernment, eHealth and so on". f) "The proposed recognition will not lead to standstill on national or European activities, nor to the adoption of the specifications as national standards in the CEN and CENELEC members (usually in their official national languages), nor to withdrawal of conflicting national standards. A big asset of the European standardization system is its coherence and lack of fragmentation." g) "We always miss concrete and specific examples of where consortia referencing are supposed to be helpful." First of all, note that ETSI, the third ESO, did not join the position. The reason is, of course, that ETSI beyond being an ESO, also has a global perspective and, moreover, does consider reality. Secondly, having produced arguments a) to g), CEN/CENELEC has the audacity to call a meeting on Friday 25 February entitled "ICT standardization - improving collaboration in Europe". This sounds very nice, but they have not set the stage for constructive debate. Rather, they demonstrate a striking lack of vision and lack of perspective. I will back this up by three facts, and leave it there. 1. Since the 1980s, global industry fora and consortia, such as IETF, W3C and OASIS have emerged as world-leading ICT standards development organizations with excellent procedures for openness and transparency in all phases of standards development, ex post and ex ante. - Practically no ICT system can be built without using fora and consortia standards (FCS). - Without using FCS, neither the Internet, upon which the EU economy depends, nor EU institutions would operate. - FCS are of high relevance for achieving and promoting interoperability and driving innovation. 2. FCS are complementary to the formally recognized standards organizations including the ESOs. - No work will be taken away from the ESOs should the EU recognize certain FCS. - Each FCS would be evaluated on its merit and on the openness of the process that produced it. ESOs would, with other stakeholders, have a say. - ESOs could potentially educate and assist European stakeholders to engage more actively and constructively with FCS. - ETSI, also an ESO, seems to clearly recognize these facts. 3. Europe and its Member States have a strong voice in several of the most relevant global industry fora and consortia. - W3C: W3C was founded in 1994 by an Englishman, Sir Tim Berners-Lee, in collaboration with CERN, the European research lab. In April 1995, INRIA (Institut National de Recherche en Informatique et Automatique) in France became the first European W3C host and in 2003, ERCIM (European Research Consortium in Informatics and Mathematics), also based in France, took over the role of European W3C host from INRIA. Today, W3C has 326 Members, 40% of which are European. Government participation is also strong, and it could be increased - a development that is very much desired by W3C. Current members of the W3C Advisory Board includes Ora Lassila (Nokia) and Charles McCathie Nevile (Opera). Nokia is Finnish company, Opera is a Norwegian company. SAP's Claus von Riegen is an alumni of the same Advisory Board. - OASIS: its membership - 30% of which is European - represents the marketplace, reflecting a balance of providers, user companies, government agencies, and non-profit organizations. In particular, about 15% of OASIS members are governments or universities. Frederick Hirsch from Nokia, Claus von Riegen from SAP AG and Charles-H. Schulz from Ars Aperta are on the Board of Directors. Nokia is a Finnish company, SAP is a German company and Ars Aperta is a French company. The Chairman of the Board is Peter Brown, who is an Independent Consultant, an Austrian citizen AND an official of the European Parliament currently on long-term leave. - IETF: The oversight of its activities is by the Internet Architecture Board (IAB), since 2007 chaired by Olaf Kolkman, a Dutch national who lives in Uithoorn, NL. Kolkman is director of NLnet Labs, a foundation chartered to develop open source software and open source standards for the Internet. Other IAB members include Marcelo Bagnulo whose affiliation is the University Carlos III of Madrid, Spain as well as Hannes Tschofenig from Nokia Siemens Networks. Nokia is a Finnish company. Siemens is a German company. Nokia Siemens is a European joint venture. - Member States: At least 17 European Member States have developed Interoperability Frameworks that include FCS, according to the EU-funded National Interoperability Framework Observatory (see list and NIFO web site on IDABC). This also means they actively procure solutions using FCS, reference FCS in their policies and even in laws. Member State reps are free to engage in FCS, and many do. It would be nice if the EU adjusted to this reality. - A huge number of European nationals work in the global IT industry, on European soil or elsewhere, whether in EU registered companies or not. CEN/CENELEC lacks perspective and has engaged in an effort to twist facts that is quite striking from a publicly funded organization. I wish them all possible success with Friday's meeting but I fear all of the most important stakeholders will not be at the table. Not because they do not wish to collaborate, but because they just have been insulted. If they do show up, it would be a gracious move, almost beyond comprehension. While I do not expect CEN/CENELEC to line up perfectly in favor of fora and consortia, I think it would be to their benefit to stick to more palatable observations. Actually, I would suggest an apology, straightening out the facts. This works among friends and it works in an organizational context. Then, we can all move on. Standardization is important. Too important to ignore. Too important to distort. The European economy depends on it. We need CEN/CENELEC. It is an important organization. But CEN/CENELEC needs fora and consortia, too.

  Read the article

• CodePlex Daily Summary for Monday, November 04, 2013

  CodePlex Daily Summary for Monday, November 04, 2013Popular ReleasesDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SharePoint 2013 Global Metadata Navigation: SP 2013 Metadata Navigation Sandbox Solution: SharePoint 2013 Global Metadata Navigation sandbox solution version 1.0. Upload to your site collection solution store and activate. See the Documentation tab for detailed instructions.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...CodeGen Code Generator: CodeGen 4.3.2: Changes in this release include: Removed old tag tokens from several example templates. Fixed a bug which was causing the default author and company names not to be picked up from the registry under .NET. Added several additional tag loop expressions: <IF FIRST_TAG>, <IF LAST_TAG>, <IF MULTIPLE_TAGS> and<IF SINGLE_TAG>. Upgraded to Synergy/DE 10.1.1b, Visual Studio 2013 and Installshield Limited Edition 2013.Dynamics CRM 2013 Easy Solution Importer: Dynamics CRM 2013 Easy Solution Importer 1.0.0.0: First Version of Easy Solution Importer contains: - Entity to handle solutions - PBL to deactivate fields in form - Business Process Flow to launch the Solution Import - Plugin to import solutions - ChartSQL Power Doc: Version 1.0.2.2 BETA 1: Fixes for issues introduced with PowerShell 4.0 with serialization/deserialization. Fixed an issue with the max length of an Excel cell being exceeded by AD groups with a large number of members.Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".AutoAudit: AutoAudit 3.20f: Here is a high level list of the things I have changed between AutoAudit 2.00h and 3.20f ... Note: 3.20f corrects a minor bug found in 3.20e in the _RowHistory UDF when using column names with spaces. 1. AutoAudit has been tested on SQL Server 2005, 2008, 2008R2 and 2012. 2. Added the capability for AutoAudit to handle primary keys with up to 5 columns. 3. Added the capability for AutoAudit to save changes for a subset of the columns in a table. 4. Normalized the Audit table and created...Aricie - Friendlier Url Provider: Aricie - Friendlier Url Provider Version 2.5.3: This is mainly a maintenance release to stabilize the new Url Group paradigm. As usual, don't forget to install the Aricie - Shared extension first Highlights Fixed: UI bugs Min Requirements: .Net 3.5+ DotNetNuke 4.8.1+ Aricie - Shared 1.7.7+Aricie Shared: Aricie.Shared Version 1.7.7: This is mainly a maintenance version. Fixes in Property Editor: list import/export Min Requirements: DotNetNuke 4.8.1+ .Net 3.5+WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlDirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...New ProjectsActive Directory User Home Directory and Home Drive Management: The script is great for migrations and overall user management. Questions please send an email to delagardecodeplex@hotmail.com.Computational Mathematics in TSQL: Combinatorial mathematics is easily expressed with computational assistance. The SQL Server engine is the canvas.Demo3: this is a demoEraDeiFessi: Un parser per un certo sito molto pesante e scomodo da navigareFinditbyme Local Search: Multi-lingual search engine that can index entities with multiple attributes.MVC Demo Project - 6: Demo project showing how to use partial views inside an ASP.NET MVC application.OLM to PST Converters: An Ideal Approach for Mac Users: OLM to PST converter helps you to access MAC Outlook emails with Windows platformOpen Source Grow Pack Ship: The Open Source Grow Pack Ship system is for the produce industry. It will allow companies with low funds and infrastructure to operate inside their own budget.Pauli: Pauli is a small .NET based password manager for home use. The Software helps a user to organize passwords, PIN codes, login accounts and notes.Refraction: Member element sorting. Contains reusable Visual Studio Extensibility code in the 'CodeManifold' project.Sensarium Cybernetic Art: Sensarium Cybernetic Art will use Kinect and brainwave technologies to create a true cybernetic art system. SharePoint - Tetris WebPart: Tetris webpart for SharePoint 2013Software Product Licensing: Dot License is very easy for your software product licensing. Product activation based on AES encryption, Processor ID and a single GUID key.VBS Class Framework: The 'VBS Class Framework' is an experimental project whcih aims at delivering 'Visual Basic Script Classes' for some commonly used Objects / Components (COM).VisualME7Logger: Graphical tools for logging real time performance statistics from VW and Audi automobilesVM Role Authoring Tool: VM ROLE Authoring Tool is used to author consistent VM Role gallery workloads for Windows Azure Pack and Windows Azure. wallet: Wallet Windows 8 Store Application: Windows 8 Store Application with XAML and C#Windows Azure Cache Extension Library: Windows Azure Cache Extension LibraryWindows Firewall Notifier: Windows Firewall Notifier (WFN) extends the default Windows embedded firewall behavior, allowing to visualize and handle incoming or outgoing connections.

  Read the article

• Ubuntu 12.04 + Raid0 + Windows 7 not loading

  - by Douglas

  please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

  Read the article

• CodePlex Daily Summary for Tuesday, November 05, 2013

  CodePlex Daily Summary for Tuesday, November 05, 2013Popular ReleasesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...DNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category. Updated database script file. Now compatible with lower version of SQL Server.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SharePoint 2013 Global Metadata Navigation: SP 2013 Metadata Navigation Sandbox Solution: SharePoint 2013 Global Metadata Navigation sandbox solution version 1.0. Upload to your site collection solution store and activate. See the Documentation tab for detailed instructions.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...CodeGen Code Generator: CodeGen 4.3.2: Changes in this release include: Removed old tag tokens from several example templates. Fixed a bug which was causing the default author and company names not to be picked up from the registry under .NET. Added several additional tag loop expressions: <IF FIRST_TAG>, <IF LAST_TAG>, <IF MULTIPLE_TAGS> and<IF SINGLE_TAG>. Upgraded to Synergy/DE 10.1.1b, Visual Studio 2013 and Installshield Limited Edition 2013.SQL Power Doc: Version 1.0.2.2 BETA 1: Fixes for issues introduced with PowerShell 4.0 with serialization/deserialization. Fixed an issue with the max length of an Excel cell being exceeded by AD groups with a large number of members.Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".AutoAudit: AutoAudit 3.20f: Here is a high level list of the things I have changed between AutoAudit 2.00h and 3.20f ... Note: 3.20f corrects a minor bug found in 3.20e in the _RowHistory UDF when using column names with spaces. 1. AutoAudit has been tested on SQL Server 2005, 2008, 2008R2 and 2012. 2. Added the capability for AutoAudit to handle primary keys with up to 5 columns. 3. Added the capability for AutoAudit to save changes for a subset of the columns in a table. 4. Normalized the Audit table and created...Aricie - Friendlier Url Provider: Aricie - Friendlier Url Provider Version 2.5.3: This is mainly a maintenance release to stabilize the new Url Group paradigm. As usual, don't forget to install the Aricie - Shared extension first Highlights Fixed: UI bugs Min Requirements: .Net 3.5+ DotNetNuke 4.8.1+ Aricie - Shared 1.7.7+Aricie Shared: Aricie.Shared Version 1.7.7: This is mainly a maintenance version. Fixes in Property Editor: list import/export Min Requirements: DotNetNuke 4.8.1+ .Net 3.5+WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.New ProjectsAForge.NET FFmpeg - LGPL Version: AForge.Video.FFMPEG recompiled under LGPLv3 which can be distributed with proprietary projects, without requiring you to release all of your proprietary source.Albatross Shell: Albatross Shell is a WPF based Shell program that can host other WPF application modules.Analysis Services ServerActivity Monitor (ASSAM) 2014: Analysis Services Server Activity Monitor (ASSAM 2014) is an upgraded version of the Analysis Services Activity Monitor 2012.AsuraCode: AsuraCode 0.1Chimera - Automated Testing Suite: Chimera is an automated testing suite, intended to simplify and automate system and tests deployment. Oriented around the MVC architecture, it has web based UI.Create Sitemap for your Website (Sitemap Writer): Sitemap Writer help create sitemap for your website. It recursively look for links on your each page and add up in list to write a site map. DataSync: ????HCS Analyzer: HCS Analyzerk? toán thu? dona: chuong trình k? toán thu? donaLanguage improver: startedOrchard Abstractions: An Orchard module for providing higher-level abstractions to Orchard services.Orchard Abstractions - Examples: Examples for Orchard Abstractions (https://orchardabstractions.codeplex.com/)Role Based Views in Microsoft Dynamics CRM 2011: This tool will allow you to configure visibility and setting the default view of a logged in user based on security roles.SF.DotNet.Utilities: DotNet.UtilitiesShot: A real time C# web application framework designed in the image of ASP.NET.Soccer Managment System: Soccer Management SystemSTAR FOX XNA: Remake of a classic videogame. In this case, that videogame will be Star Fox (1993) for SNES game console.The Dargon Project: DargonTweetFeed: A small widget that enables you to display a twitter search or profile on your Sitecore siteWPF Themes HighRobotics: WPF Themes by High Robotics company????????? ????????: ?????????, ??????????? ?????????? ???????? ????????: ??????????? ????? ????? ??????????, ?????????? ????????? ??????.

  Read the article

• Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

  Read the article

• Custom Lookup Provider For NetBeans Platform CRUD Tutorial

  - by Geertjan

  For a long time I've been planning to rewrite the second part of the NetBeans Platform CRUD Application Tutorial to integrate the loosely coupled capabilities introduced in a seperate series of articles based on articles by Antonio Vieiro (a great series, by the way). Nothing like getting into the Lookup stuff right from the get go (rather than as an afterthought)! The question, of course, is how to integrate the loosely coupled capabilities in a logical way within that tutorial. Today I worked through the tutorial from scratch, up until the point where the prototype is completed, i.e., there's a JTextArea displaying data pulled from a database. That brought me to the place where I needed to be. In fact, as soon as the prototype is completed, i.e., the database connection has been shown to work, the whole story about Lookup.Provider and InstanceContent should be introduced, so that all the subsequent sections, i.e., everything within "Integrating CRUD Functionality" will be done by adding new capabilities to the Lookup.Provider. However, before I perform open heart surgery on that tutorial, I'd like to run the scenario by all those reading this blog who understand what I'm trying to do! (I.e., probably anyone who has read this far into this blog entry.) So, this is what I propose should happen and in this order: Point out the fact that right now the database access code is found directly within our TopComponent. Not good. Because you're mixing view code with data code and, ideally, the developers creating the user interface wouldn't need to know anything about the data access layer. Better to separate out the data access code into a separate class, within the CustomerLibrary module, i.e., far away from the module providing the user interface, with this content: public class CustomerDataAccess { public List<Customer> getAllCustomers() { return Persistence.createEntityManagerFactory("CustomerLibraryPU"). createEntityManager().createNamedQuery("Customer.findAll").getResultList(); } } Point out the fact that there is a concept of "Lookup" (which readers of the tutorial should know about since they should have followed the NetBeans Platform Quick Start), which is a registry into which objects can be published and to which other objects can be listening. In the same way as a TopComponent provides a Lookup, as demonstrated in the NetBeans Platform Quick Start, your own object can also provide a Lookup. So, therefore, let's provide a Lookup for Customer objects.  import org.openide.util.Lookup; import org.openide.util.lookup.AbstractLookup; import org.openide.util.lookup.InstanceContent; public class CustomerLookupProvider implements Lookup.Provider { private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: //...to come... // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } } Point out the fact that, in the same way as we can publish an object into the Lookup of a TopComponent, we can now also publish an object into the Lookup of our CustomerLookupProvider. Instead of publishing a String, as in the NetBeans Platform Quick Start, we'll publish an instance of our own type. And here is the type: public interface ReadCapability { public void read() throws Exception; } And here is an implementation of our type added to our Lookup: public class CustomerLookupProvider implements Lookup.Provider { private Set<Customer> customerSet; private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { customerSet = new HashSet<Customer>(); // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: instanceContent.add(new ReadCapability() { @Override public void read() throws Exception { ProgressHandle handle = ProgressHandleFactory.createHandle("Loading..."); handle.start(); customerSet.addAll(new CustomerDataAccess().getAllCustomers()); handle.finish(); } }); // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } public Set<Customer> getCustomers() { return customerSet; } } Point out that we can now create a new instance of our Lookup (in some other module, so long as it has a dependency on the module providing the CustomerLookupProvider and the ReadCapability), retrieve the ReadCapability, and then do something with the customers that are returned, here in the rewritten constructor of the TopComponent, without needing to know anything about how the database access is actually achieved since that is hidden in the implementation of our type, above: public CustomerViewerTopComponent() { initComponents(); setName(Bundle.CTL_CustomerViewerTopComponent()); setToolTipText(Bundle.HINT_CustomerViewerTopComponent()); // EntityManager entityManager = Persistence.createEntityManagerFactory("CustomerLibraryPU").createEntityManager(); // Query query = entityManager.createNamedQuery("Customer.findAll"); // List<Customer> resultList = query.getResultList(); // for (Customer c : resultList) { // jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); // } CustomerLookupProvider lookup = new CustomerLookupProvider(); ReadCapability rc = lookup.getLookup().lookup(ReadCapability.class); try { rc.read(); for (Customer c : lookup.getCustomers()) { jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); } } catch (Exception ex) { Exceptions.printStackTrace(ex); } } Does the above make as much sense to others as it does to me, including the naming of the classes? Feedback would be appreciated! Then I'll integrate into the tutorial and do the same for the other sections, i.e., "Create", "Update", and "Delete". (By the way, of course, the tutorial ends up showing that, rather than using a JTextArea to display data, you can use Nodes and explorer views to do so.)

  Read the article

• Given an XML which contains a representation of a graph, how to apply it DFS algorithm? [on hold]

  - by winston smith

  Given the followin XML which is a directed graph: <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE graph PUBLIC "-//FC//DTD red//EN" "../dtd/graph.dtd"> <graph direct="1"> <vertex label="V0"/> <vertex label="V1"/> <vertex label="V2"/> <vertex label="V3"/> <vertex label="V4"/> <vertex label="V5"/> <edge source="V0" target="V1" weight="1"/> <edge source="V0" target="V4" weight="1"/> <edge source="V5" target="V2" weight="1"/> <edge source="V5" target="V4" weight="1"/> <edge source="V1" target="V2" weight="1"/> <edge source="V1" target="V3" weight="1"/> <edge source="V1" target="V4" weight="1"/> <edge source="V2" target="V3" weight="1"/> </graph> With this classes i parsed the graph and give it an adjacency list representation: import java.io.IOException; import java.util.HashSet; import java.util.LinkedList; import java.util.Collection; import java.util.Iterator; import java.util.logging.Level; import java.util.logging.Logger; import practica3.util.Disc; public class ParsingXML { public static void main(String[] args) { try { // TODO code application logic here Collection<Vertex> sources = new HashSet<Vertex>(); LinkedList<String> lines = Disc.readFile("xml/directed.xml"); for (String lin : lines) { int i = Disc.find(lin, "source=\""); String data = ""; if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } Vertex v = new Vertex(); v.setName(data); v.setAdy(new HashSet<Vertex>()); sources.add(v); } } Iterator it = sources.iterator(); while (it.hasNext()) { Vertex ver = (Vertex) it.next(); Collection<Vertex> adyacencias = ver.getAdy(); LinkedList<String> ls = Disc.readFile("xml/graphs.xml"); for (String lin : ls) { int i = Disc.find(lin, "target=\""); String data = ""; if (lin.contains("source=\""+ver.getName())) { Vertex v = new Vertex(); if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } v.setName(data); } i = Disc.find(lin, "weight=\""); data = ""; if (i > 0 && i < lin.length()) { while (lin.charAt(i + 1) != '"') { data += lin.charAt(i + 1); i++; } v.setWeight(Integer.parseInt(data)); } if (v.getName() != null) { adyacencias.add(v); } } } } for (Vertex vert : sources) { System.out.println(vert); System.out.println("adyacencias: " + vert.getAdy()); } } catch (IOException ex) { Logger.getLogger(ParsingXML.class.getName()).log(Level.SEVERE, null, ex); } } } This is another class: import java.util.Collection; import java.util.Objects; public class Vertex { private String name; private int weight; private Collection ady; public Collection getAdy() { return ady; } public void setAdy(Collection adyacencias) { this.ady = adyacencias; } public String getName() { return name; } public void setName(String nombre) { this.name = nombre; } public int getWeight() { return weight; } public void setWeight(int weight) { this.weight = weight; } @Override public int hashCode() { int hash = 7; hash = 43 * hash + Objects.hashCode(this.name); hash = 43 * hash + this.weight; return hash; } @Override public boolean equals(Object obj) { if (obj == null) { return false; } if (getClass() != obj.getClass()) { return false; } final Vertex other = (Vertex) obj; if (!Objects.equals(this.name, other.name)) { return false; } if (this.weight != other.weight) { return false; } return true; } @Override public String toString() { return "Vertice{" + "name=" + name + ", weight=" + weight + '}'; } } And finally: /** * * @author user */ /* -*-jde-*- */ /* <Disc.java> Contains the main argument*/ import java.io.*; import java.util.LinkedList; /** * Lectura y escritura de archivos en listas de cadenas * Ideal para el uso de las clases para gráficas. * * @author Peralta Santa Anna Victor Miguel * @since Julio 2011 */ public class Disc { /** * Metodo para lectura de un archivo * * @param fileName archivo que se va a leer * @return El archivo en representacion de lista de cadenas */ public static LinkedList<String> readFile(String fileName) throws IOException { BufferedReader file = new BufferedReader(new FileReader(fileName)); LinkedList<String> textlist = new LinkedList<String>(); while (file.ready()) { textlist.add(file.readLine().trim()); } file.close(); /* for(String linea:textlist){ if(linea.contains("source")){ //String generado = linea.replaceAll("<\\w+\\s+\"", ""); //System.out.println(generado); } }*/ return textlist; }//readFile public static int find(String linea,String palabra){ int i,j; boolean found = false; for(i=0,j=0;i<linea.length();i++){ if(linea.charAt(i)==palabra.charAt(j)){ j++; if(j==palabra.length()){ found = true; return i; } }else{ continue; } } if(!found){ i= -1; } return i; } /** * Metodo para la escritura de un archivo * * @param fileName archivo que se va a escribir * @param tofile la lista de cadenas que quedaran en el archivo * @param append el bit que dira si se anexa el contenido o se empieza de cero */ public static void writeFile(String fileName, LinkedList<String> tofile, boolean append) throws IOException { FileWriter file = new FileWriter(fileName, append); for (int i = 0; i < tofile.size(); i++) { file.write(tofile.get(i) + "\n"); } file.close(); }//writeFile /** * Metodo para escritura de un archivo * @param msg archivo que se va a escribir * @param tofile la cadena que quedaran en el archivo * @param append el bit que dira si se anexa el contenido o se empieza de cero */ public static void writeFile(String msg, String tofile, boolean append) throws IOException { FileWriter file = new FileWriter(msg, append); file.write(tofile); file.close(); }//writeFile }// I'm stuck on what can be the best way to given an adjacency list representation of the graph how to apply it Depth-first search algorithm. Any idea of how to aproach to complete the task?

  Read the article

• Fraud Detection with the SQL Server Suite Part 1

  - by Dejan Sarka

  While working on different fraud detection projects, I developed my own approach to the solution for this problem. In my PASS Summit 2013 session I am introducing this approach. I also wrote a whitepaper on the same topic, which was generously reviewed by my friend Matija Lah. In order to spread this knowledge faster, I am starting a series of blog posts which will at the end make the whole whitepaper. Abstract With the massive usage of credit cards and web applications for banking and payment processing, the number of fraudulent transactions is growing rapidly and on a global scale. Several fraud detection algorithms are available within a variety of different products. In this paper, we focus on using the Microsoft SQL Server suite for this purpose. In addition, we will explain our original approach to solving the problem by introducing a continuous learning procedure. Our preferred type of service is mentoring; it allows us to perform the work and consulting together with transferring the knowledge onto the customer, thus making it possible for a customer to continue to learn independently. This paper is based on practical experience with different projects covering online banking and credit card usage. Introduction A fraud is a criminal or deceptive activity with the intention of achieving financial or some other gain. Fraud can appear in multiple business areas. You can find a detailed overview of the business domains where fraud can take place in Sahin Y., & Duman E. (2011), Detecting Credit Card Fraud by Decision Trees and Support Vector Machines, Proceedings of the International MultiConference of Engineers and Computer Scientists 2011 Vol 1. Hong Kong: IMECS. Dealing with frauds includes fraud prevention and fraud detection. Fraud prevention is a proactive mechanism, which tries to disable frauds by using previous knowledge. Fraud detection is a reactive mechanism with the goal of detecting suspicious behavior when a fraudster surpasses the fraud prevention mechanism. A fraud detection mechanism checks every transaction and assigns a weight in terms of probability between 0 and 1 that represents a score for evaluating whether a transaction is fraudulent or not. A fraud detection mechanism cannot detect frauds with a probability of 100%; therefore, manual transaction checking must also be available. With fraud detection, this manual part can focus on the most suspicious transactions. This way, an unchanged number of supervisors can detect significantly more frauds than could be achieved with traditional methods of selecting which transactions to check, for example with random sampling. There are two principal data mining techniques available both in general data mining as well as in specific fraud detection techniques: supervised or directed and unsupervised or undirected. Supervised techniques or data mining models use previous knowledge. Typically, existing transactions are marked with a flag denoting whether a particular transaction is fraudulent or not. Customers at some point in time do report frauds, and the transactional system should be capable of accepting such a flag. Supervised data mining algorithms try to explain the value of this flag by using different input variables. When the patterns and rules that lead to frauds are learned through the model training process, they can be used for prediction of the fraud flag on new incoming transactions. Unsupervised techniques analyze data without prior knowledge, without the fraud flag; they try to find transactions which do not resemble other transactions, i.e. outliers. In both cases, there should be more frauds in the data set selected for checking by using the data mining knowledge compared to selecting the data set with simpler methods; this is known as the lift of a model. Typically, we compare the lift with random sampling. The supervised methods typically give a much better lift than the unsupervised ones. However, we must use the unsupervised ones when we do not have any previous knowledge. Furthermore, unsupervised methods are useful for controlling whether the supervised models are still efficient. Accuracy of the predictions drops over time. Patterns of credit card usage, for example, change over time. In addition, fraudsters continuously learn as well. Therefore, it is important to check the efficiency of the predictive models with the undirected ones. When the difference between the lift of the supervised models and the lift of the unsupervised models drops, it is time to refine the supervised models. However, the unsupervised models can become obsolete as well. It is also important to measure the overall efficiency of both, supervised and unsupervised models, over time. We can compare the number of predicted frauds with the total number of frauds that include predicted and reported occurrences. For measuring behavior across time, specific analytical databases called data warehouses (DW) and on-line analytical processing (OLAP) systems can be employed. By controlling the supervised models with unsupervised ones and by using an OLAP system or DW reports to control both, a continuous learning infrastructure can be established. There are many difficulties in developing a fraud detection system. As has already been mentioned, fraudsters continuously learn, and the patterns change. The exchange of experiences and ideas can be very limited due to privacy concerns. In addition, both data sets and results might be censored, as the companies generally do not want to publically expose actual fraudulent behaviors. Therefore it can be quite difficult if not impossible to cross-evaluate the models using data from different companies and different business areas. This fact stresses the importance of continuous learning even more. Finally, the number of frauds in the total number of transactions is small, typically much less than 1% of transactions is fraudulent. Some predictive data mining algorithms do not give good results when the target state is represented with a very low frequency. Data preparation techniques like oversampling and undersampling can help overcome the shortcomings of many algorithms. SQL Server suite includes all of the software required to create, deploy any maintain a fraud detection infrastructure. The Database Engine is the relational database management system (RDBMS), which supports all activity needed for data preparation and for data warehouses. SQL Server Analysis Services (SSAS) supports OLAP and data mining (in version 2012, you need to install SSAS in multidimensional and data mining mode; this was the only mode in previous versions of SSAS, while SSAS 2012 also supports the tabular mode, which does not include data mining). Additional products from the suite can be useful as well. SQL Server Integration Services (SSIS) is a tool for developing extract transform–load (ETL) applications. SSIS is typically used for loading a DW, and in addition, it can use SSAS data mining models for building intelligent data flows. SQL Server Reporting Services (SSRS) is useful for presenting the results in a variety of reports. Data Quality Services (DQS) mitigate the occasional data cleansing process by maintaining a knowledge base. Master Data Services is an application that helps companies maintaining a central, authoritative source of their master data, i.e. the most important data to any organization. For an overview of the SQL Server business intelligence (BI) part of the suite that includes Database Engine, SSAS and SSRS, please refer to Veerman E., Lachev T., & Sarka D. (2009). MCTS Self-Paced Training Kit (Exam 70-448): Microsoft® SQL Server® 2008 Business Intelligence Development and Maintenance. MS Press. For an overview of the enterprise information management (EIM) part that includes SSIS, DQS and MDS, please refer to Sarka D., Lah M., & Jerkic G. (2012). Training Kit (Exam 70-463): Implementing a Data Warehouse with Microsoft® SQL Server® 2012. O'Reilly. For details about SSAS data mining, please refer to MacLennan J., Tang Z., & Crivat B. (2009). Data Mining with Microsoft SQL Server 2008. Wiley. SQL Server Data Mining Add-ins for Office, a free download for Office versions 2007, 2010 and 2013, bring the power of data mining to Excel, enabling advanced analytics in Excel. Together with PowerPivot for Excel, which is also freely downloadable and can be used in Excel 2010, is already included in Excel 2013. It brings OLAP functionalities directly into Excel, making it possible for an advanced analyst to build a complete learning infrastructure using a familiar tool. This way, many more people, including employees in subsidiaries, can contribute to the learning process by examining local transactions and quickly identifying new patterns.

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >