Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 219/281 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• What's the best external hard drive configuration for a software developer laptop?

  - by Dan

  I've got a Dell laptop that I use as a software developer box at work and find that the drive is usually the bottleneck. I'd like to hook up two 10k RPM drives that are striped for performance. I've looked for drive cases with RAID but there don't seem to be very many choices and I'm worried about compatibility with the drives (preferably SATA 2). Also I don't have a SATA connection on my machine so it'll have to USB 2.0 for now. Am I headed down the right path or am I missing a much simpler configuration?

  Read the article

• How do I use a Minitel terminal as a linux dumb terminal

  - by Pawz

  I recently purchased a US version of the Alcatel Minitel terminal. I think it's a 1B version. Pictures of it here: I tried connecting a null modem to the 25 pin port on the back and plugging it into a linux box running agetty but I couldn't get it to show any signs of being connected. I used Google Translate to translate this document into English: http://mirabellug.org/wikini/upload/Documentations_minitel.pdf As far as I can tell, you take it out of videotex mode by typing Fcnt-T A, then turn off local echo with Fcnt-T E, then set it to 4800 baud with Fcnt-P 4. I presume Fcnt refers to the "CTRL" key on my terminal. But I think I'm doing something wrong, because it doesn't look like it's recognising the keystrokes, because "Fcnt-T A" just prints the letter A to the screen, which is not what you'd expect a function key combo to do. Has anyone used these minitel terminals as a linux terminal, and if so, please can you share how to configure the minitel to run as a terminal ? Is the 25 pin plug even the correct port to use ? I read something online that indicated you're supposed to use the 5 pin DIN plug instead, is that right ? If so, what's the 25 pin plug for ? If I am supposed to use the DIN plug, does anyone know the pinouts so I can make a cable ?

  Read the article

• Replacing notebook SATA hard disk with SSD without reinstalling

  - by Graeme Donaldson

  So there's a notebook (Lenovo Thinkpad Z61m) with a SATA hard disk, the SATA controller is configured for native AHCI operation & the OS is Windows XP. The hard disk is going to be replaced with an SSD which is larger. I have an idea of how I'm going to do this, but I want to be sure there isn't something obvious I'm missing. Connect external USB drive Boot some flavour of Linux live CD Use dd to clone the SATA disk to the external drive Power off and replace the SATA disk with the SSD Boot the live CD Use dd to clone back from the external drive to the SSD Does anyone have anything to add?

  Read the article

• Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

  - by tog22

  I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

  Read the article

• External optical drive won't plug 'n play...sometimes.

  - by Connor

  alright, I've looked a lot of different ways, but here goes. i have an external DVD burner that connects via USB and should be plug 'n play however sometimes when I connect it a message pops up requesting any CD or installation software it came with. It didn't come with any though. The confusing part is that if I wait a couple weeks and plug it in, then it works fine, but if I turn it off and back on the problem arises again. I've tried different computers, same problem. There's little to no customer support from the company, Ativa, and no drivers for the product. I'm hoping there's a registry trick for this. any help?

  Read the article

• Navigation keys on numeric keypad randomly stop working

  - by Tom Hughes

  Shortly after a restart, the arrow and navigation (Home, End...) keys on my numeric keypad will randomly stop working, and -- regardless of the state of the NumLock -- return only numbers. I notice this the most in browser applications (like this edit box) but the same effect is true on the command line and in desktop applications like Word. I swapped keyboards and now use a Microsoft keyboard (both are USB keyboards) but the same behavior persists. I also tried a clean boot to clean out startup programs but this made no difference. The separate arrow keys and navigation keys between the QWERTY keys and the numeric keypad work fine, but my strong preference (dating back to DOS and MS Flight Simulator) is to use the navigation keys in the numeric keypad.

  Read the article

• Connecting 2 different subnet masks

  - by Jonathan

  I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

  Read the article

• UPS - Two computers - How to get them to both shutdown when battery is low?

  - by hamlin11

  Short Version: How do I get 2 computers to shutdown when a UPS battery gets low? Long Version: I have an APC UPS, the RS 1500. It has a USB cord that goes into my main dev computer. My dev computer will shutdown when the battery gets low. However, in addition, I have now hooked up a database server to the same UPS. How can I have that database server also know that it needs to shut down when the battery gets low?

  Read the article

• WIFI connection stopped working on Windows - how to troubleshoot

  - by Michiel de Mare

  Friends and family often come to me with this problem, and while I usually manage to fix their problems eventually, it often take me several hours. I'm sure there are many of us in the same position. Also, friends rarely seem to know which provider they're using, or what the password is of their WIFI-connection or ADSL-router. I'd like to gather that information myself. I'd like to have a checklist to diagnose and fix the problem, and a set of utilities on an usb-stick to help me. Where to start?

  Read the article

• Connect laptop to mobile wifi

  - by Arnab Sen Gupta

  I have a nokia N97. In my apartment there's a wifi network that we all use to connect to the internet. But for the past few days my laptop is not able to find the network..Initially I thought it was a problem of the network,but hen I found out that others were able to use it..My vista os laptop is able to detect other available networks but not the required one..Then i tried to connect my cell phone to the network and it did easily!! I tried restoring the network settings to default but it showed the network for just 2 mins and it ws back to square one.. I wanted to know can I connect my laptop to the cell using USB and browse internet through that?? I have done it when I used GPRS but am not sure if it cn be done in this situation when the cell is connected toa wifi network..plz help..

  Read the article

• Exchange enrypted messages with a single recipient

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• server 2008 sp2 hung not responding with kvm reset as well

  - by dasko

  using server 2008 sp2 64bit os standard edition with all updates from ms site. server was hung this morning, resetting kvm did nothing, plugging in another usb mouse on the back did not let the mouse light up red on it's optic end. other machines on the kvm worked fine including the mouse. server is rack mounted 4u supermicro systems or superserver. had to hard power off and restart. any thoughts? i burnt this system in well for a couple of weeks before deploying so it is kind of odd that this happened. any help is greatly appreciated, or if anyone can suggest software to install that can maybe send out the email when something like that goes down. i looked for the minidump but nothing. nothing in the event viewers either. gd

  Read the article

• fedora liveUSB fails, drops to debug shell

  - by evan

  Trying to install Fedora 15 via a live USB made with unetbootin. I get to the unetbootin boot menu, select Fedora-15-x86_64-Live-Desktop.is, I get to this screen, then it drops into a debug shell with the message sh: can't access tty: job control turned off. The last message is dmseg is dracut Warning: No root device "live:/dev/disk/by-label/Fedora-15-Beta-x86_64-Live-Desktop.is" found. Seems to be the same problem detailed here. Tried to try nk1eto's solution but there is no by-label directory in /dev/disk. There's by-id, by-path and by-uuid.

  Read the article

• Cannot Resolve Host Or Access Website Through Router

  - by Boris_yo

  This is weird. I am on Windows XP with Edimax BR 6204Wg. I have 3 devices - 2 laptops and 1 smartphone. 1st laptop and smartphone are connected through WiFi to router and 2nd laptop is connected through LAN to router. Before firmware upgrade i did not try to access website but after firmware upgrade to latest version: http://www.edimax.eu/en/support_detail.php?pd_id=11&pl1_id=3#02 i had problems resolving host, pinging, tracerting and accessing website. Sometimes ping and tracert work but i cannot access website and sometimes i can access website but ping and tracert do not work. Weird? I downgraded to previous version and no changes. If i can no longer access that website through Internet Explorer, i can access it in Firefox. I tried deleting cookies, clearing cache and that seem not make difference. Switching LAN port did not make difference. When i disconnect router and connect laptop through LAN to internet modem, everything is normal. I tried resetting router, resetting to factory default settings and all did not help. At the moment i can access website on laptop connected through LAN from Firefox and Internet Explorer, but on my smartphone i can access website only with Opera but not with built-in browser and Skyfire. UPDATE: I just could only access with Internet Explorer but not with other browsers on my PC. Minutes later i could access with all browsers. But on smartphone i could only access with Opera and not with other browsers. I am confused. I also determined that sometimes i can access and sometimes can't. What is also weird is that when ping and tracert cannot resolve host, i still am able to access website.

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• pfSense router on a LAN with two gateways

  - by JohnCC

  I have a LAN with an ADSL modem/router on it. We have just gained an alternative high-speed internet connection at our location, and I want to connect the LAN to it, eventually dropping the ADSL. I've chosen to use a small PFSense box to connect the LAN to the new WAN connection. Two servers on the LAN run services accessible to the outside via NAT using the single ADSL WAN IP. We have DNS records which point to this IP. I want to do the same via the new connection, using the WAN IP there. That connection permits multiple IPs, so I have configured pfSense using virtual IP's, 1:1 NAT and appropriate firewall rules. When I change the servers' default gateway settings to the pfSense box, I can access the services via the new WAN IPs without a problem. However, I can no longer access them via the old WAN IP. If I set the servers' default gateway back to the ADSL router, then the opposite is true - I can access the services via the ADSL IP, but not via the new one. In the first case, I believe this is because an incoming SYN packet arrives at the ADSL WAN IP, and is NAT'd and sent to the internal IP of the server. The server responds with a SYN/ACK which it sends via its default gateway, the pfSense box. The pfSense box sees a SYN/ACK that it saw no SYN for and drops the packet. Is there any sensible way around this? I would like the services to be accessible via both IPs for a short period at least, since once I change the DNS it will take a while before everyone picks up the new address.

  Read the article

• Connection refused after installing vsftp on Ubuntu 8.04 with fail2ban

  - by Patrick

  I have been using an Ubuntu 8.04 server with fail2ban for a while now (12+ months) and using ftp over SSH without any problems. I have a new user that needs to put files onto the server from an IP modem. I have installed vsftp (sudo apt-get install vsftp) and everything installed correctly. I have created an ftp user on the server following this guide. Whenever I try to connect to the server with my ftp program (filezilla) I get an immediate response of: Connection attempt failed with "ECONNREFUSED - Connection refused by server". I have looked into fail2ban and cannot find any problems. The iptables setup is: Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere VSFTP config file (commented lines removed) listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=[username] secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Any ideas on what is preventing access to the server?

  Read the article

• sniffing on a switched LAN

  - by shodanex

  Hi, I often find myself in the position of having to sniff on a connection between for example an arm board I am developing on, and another computer on the network, or out of the network. The easy situation is when I can install a sniffer on the computer talking to the embedded device. When it is not possible, I currently install an old 10Mb/s HUB. However I am afraid my HUB might stop working, and I would like to know some alternative. Here are the alternatives I could think of : Buy another HUB. Is that still possible ? Have some sort of ethernet sniffing bridge, like what they do for USB. I am afraid this kind of device is expensive. use ARP poisoning.

  Read the article

• development and music recording machine suggestions?

  - by dean nolan

  I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

  Read the article

• Can't access certain web sites - reset router, any ideas?

  - by IniTech

  EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

  Read the article

• Xerox Workcentre 3119 and Linux

  - by Milan Babuškov

  I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

  Read the article

• Laptop recommendation for home user

  - by Mehper C. Palavuzlar

  I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

  Read the article

• WiFi: Connect to a network with hidden SSID in Windows 7

  - by Dor

  I have Windows 7 with the following station: D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.A2) (driver version 3.5.0.21). I'm trying to connect to a wireless network that has an hidden SSID with the command: Netsh wlan connect name="myNetworkProfile" The profile is configured to connect even if the network is not broadcasting its name (SSID). Despite that, the command fails promptly every time with the message: The network specified by profile "myNetworkProfile" is not available to connect. Nonetheless, when trying to connect manually using the dialog box (see image below), it successfully connects to the network after about 10 or 15 seconds. Also, Please - no need to elaborate about how useless the hidden SSID feature is.

  Read the article

• Resizing mysterious partition written by DDing an ISO file

  - by Jon

  I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos. EDIT: yes, sorry. not programming related. I posted the question to serverfault.com (hopefully that's the better site for my question.)

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >