Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 222/281 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • Internet Troubles - PPPoE vs PPPoA?

    - by AkkA
    I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

    Read the article

  • How much does it wear an SD card to be frequently removed/reinserted?

    - by jtbandes
    My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

    Read the article

  • Dell 620 display is too bright to use

    - by keith
    I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

    Read the article

  • Free MPEG cutting/cropping/editing tool

    - by Stijn Sanders
    I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

    Read the article

  • Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

    - by nitbuntu
    Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

    Read the article

  • Windows 7 doesn't start anymore

    - by martani_net
    Hi, I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

    Read the article

  • How to go about scheduling a task in windows 7 to change wireless connection

    - by Skindeep2366
    This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

    Read the article

  • Drive Shows No Files But Half Space Gone

    - by Chance Robertson
    I have a 500 GB USB drive. When I go to Windows Explorer or Finder, the drive shows that about half the drive is free. However, when I open either drive in Windows 7 or OS X, no files how up. I have tried to look at the files through the command line and nothing shows. A while back, I hooked it up to my MacBookPro and there was a quick message that said the drive was not ejected properly, blah, blah. And of course I did not read the message and hit OK. It there any way to get back my files from the drive?

    Read the article

  • Suggestions for a SOHO/Home Asterisk system

    - by James
    I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

    Read the article

  • Why does my computer show a black screen when booting into Windows Vista?

    - by dassouki
    Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

    Read the article

  • Full Backup & Restore for Windows Vista

    - by Thomas Matthews
    I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

    Read the article

  • How to install Windows7 on Hitachi HTS545050a7e380 harddrive?

    - by wurlog
    I have a Samsung NP530U3B with a Hitachi HTS545050a7e380 Harddrive. In the Bios it shows as one drive Hitachi hts545050a7e380 When I try to install Windows 7 it show 2 drives in the setup Drive 0 with 15 GB Drive 1 with 460 GB Guess it is a hybrid of SSD and normal harddrive, right? I tried to install it on the second drive, but after restarting it goes back into the beginning of the Windows 7 installation. The installation routine automatically activated a 100 MB partition on Drive 0. I guess for the bootmanager. Second try: Installation on the 15GB drive. The same. After reboot it wants to install win7 all over again. If I remove the USB Stick I get the message "Missing operation system" Any ideas?

    Read the article

  • Netgear WNR1000 WiFi speed

    - by Kamil Klimek
    I have Netgear WNR1000 150N, Macbook Pro 13" with Broadcom BCM43xx 1.0, Network connection 60mbps When I connect through the cable I easily get around 60mbps. When I go through the WiFi it's capable to get only 32mbps at tops. Any ideas why is that? Is that my router limitation or maybe my WiFi card? If it is routers fault what router would you suggest. Best router would be with usb port for external hard drive. Forgot to add screenshot with connection details: Szybkosc transmisji == Transmission speed

    Read the article

  • Windows cannot access my external harddisk partition but all partition managers can

    - by Ashish
    Some weird problem happened to my Maxtor 500GB external harddisk, it all started when it once freezed during some operation. Now when I insert the drive in a USB slot, Windows asks me to format it, and if I try to open the drive from my computer it says, "not accessible".. I tried most of the major partition managers and partition recovery software. All of these can see and access my partition normally. It showing the free space and used space correctly. But Windows can't. Please help me out. Including a screenshot: On the left side, the partition manager can access and see my data in the corrupted partition, and on the right side Windows can't

    Read the article

  • Can't run Ubuntu from disc

    - by alex
    When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

    Read the article

  • How to stop mouse "pausing".

    - by Xavierjazz
    My Microsoft mouse recently stopped working, so I purchased an AOpen O-35G, plug and play. No software came with it and I was advised to "just plug it in". I did this, and it worked, although some of the more advanced features do not work. My problem is that now the mouse cursor hesitates occasionally, and then over shoots the target I selected. This never happened before. It seems to happen when I am using the mouse and a browser window reloads. Does anyone know how to change this? It is very annoying. XP Pro SP3 Thanks. EDIT: It is not a problem of dust or a hair. I have contacted the Manufacturere and they are not responding. I have the mouse attached to my computer via a powered USB hub. I am going to try plugging it in directly to see if that makes a difference.

    Read the article

  • Ubuntu 9.10: switch in KVM, mouse is detected but not usable immediately

    - by CarlF
    I use a KVM switch to jump between my tower and laptop, both placed on my desk. With Ubuntu 9.04 this worked perfectly. In 9.10, when I switch to the tower, then back to the laptop, the mouse is detected (as shown by /var/log/messages) but moving it has no effect. If I use Ctrl-Alt-F1 to switch to the TTY, then Alt-F7 back to Xorg, the mouse starts working. The tower is running Windows 7, but that shouldn't matter. Sometimes, but not other times, the USB keyboard on the KVM switch is also not usable and I have to use the laptop's built-in keyboard to switch to the TTY. The laptop has two monitors, the built-in and an external. It's (obviously) the external panel that is attached via the KVM switch. Any suggestions? Report to Canonical as a bug?

    Read the article

  • Is there a way for Windows 7 to show remaining disk space in the status bar?

    - by Matt Thompson
    This is really driving me nuts. I do a lot of moving media files to and from USB drives, and I am constantly looking to the status bar to see how much remaining space I have on a drive. It's quick, and doesn't involve any clicking. At least, that's what I used to do using Windows XP. Is there a way to get the status bar in Windows 7 to behave in the same way? I saw in a Wikipedia article that some features have been removed from Windows 7, including these two that seem to be affecting me the most: The size of any selected item and free disk space are not shown on the status bar. When no items are selected in a folder, neither the details pane nor the status bar show the total size of files in the folder. Are there any plug-ins or registry tweaks that can be made to return this functionality? If not what is the quickest way to get the remaining space on a drive without having to click on something and leaving the directory you are working in?

    Read the article

  • How to partition hard drive that has no os installed?

    - by Sarang Patil
    I have 500 GB hard drive. The laptop came with windows 7 pre installed in it. Now as I am installing Windows 8, I have deleted the C drive. So I have 460 GB free unused space where I can install Windows 8. But the Windows 8 installer does not give me any option to partition the 460 GB. The only option available are "Refresh" and "Load driver" or just selecting the 460 GB HDD and installing Windows 8 in it. So how can I partition this 460 GB before I install Windows 8 in it? Edit: Can you suggest me some tools that partition the hard drive and RUN independently (as I do not have any OS installed) from a USB ?

    Read the article

  • Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

    - by user33521
    We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

    Read the article

  • Linux VLAN Bridge

    - by raspi
    I have home network with VLANs, one for LAN, one for WLAN and one for internet. I'd like to use bridging so that instead of configuring these same VLANs to every machine, they had own VLAN ID and bridges were LAN, WLAN and internet. I've tried it but for some reason keep-alive/ttl seems to get broken because SSH sessions etc suddenly disconnects. We have this same setup working in workplace for 4+ years with 100+ customers but it's custom firewall/router hardware so accessing it is impossible. I know that it runs Linux. So what is Debian/Ubuntu default network settings doing wrong or is it just NIC driver/hw problem? I've tried to mess araund with ttl etc settings without any luck. The bad stuff is happening in the bridge because current VLAN-only setup works fine. interfaces: auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 allow-hotplug eth1 iface eth0 inet static iface eth1 inet static auto vlan111 auto vlan222 auto vlan333 auto vlan444 auto br0 auto br1 auto br2 # LAN iface vlan111 inet static vlan_raw_device eth0 # WLAN iface vlan222 inet static vlan_raw_device eth0 # ADSL Modem iface vlan333 inet static vlan_raw_device eth1 # Internet iface vlan444 inet static vlan_raw_device eth0 # LAN bridge iface br0 inet static address 192.168.0.1 netmask 255.255.255.0 bridge_ports eth0.111 bridge_stp on # Internet bridge iface br1 inet static address x.x.x.x netmask x.x.x.x gateway x.x.x.x bridge_ports eth1.333 eth0.444 bridge_stp on post-up iptables -t nat -A POSTROUTING -o br1 -j MASQUERADE pre-down iptables -t nat -D POSTROUTING -o br1 -j MASQUERADE # WLAN bridge iface br2 inet static address 192.168.1.1 netmask 255.255.255.0 bridge_ports eth0.222 bridge_stp on Sysctl: net.ipv4.conf.default.forwarding=1

    Read the article

  • Creating Windows partition in Boot Camp without an install disc

    - by Arvin
    I have an old Macbook1,1 which has Snow Leopard on it. I'd like to get Win 7 on it by using Boot Camp Assistant, however my superdrive is not working (It just spits out any disc I put in within 10 seconds). I know how to get Win 7 installed by using USB drive, but I still need Boot Camp to create the Windows partition for me. I've made an ISO file of the install disc which I've mounted, but Boot Camp won't pick it up. It seems to only look in the superdrive. How can I get Boot Camp to skip requirement of an install disc? edit: nevermind, as it turns out the partition was already created by the time it asked for the disc!

    Read the article

  • Best Small Linux Distribution for rDesktop

    - by d2jxp
    What would be the best linux distribution to use just for the purpose of rDesktop? We're trying to decide if we should get rid of old computers or just use them as thin-clients to connect to virtual Windows 7 machines on our network. I would like something with as little bloat as possible and can be run from a USB flash drive. I have tried SliTaz, ThinStation, and Pixil from Century Software. SliTaz has been my favorite so far but I still want to know if there's something better that's also easily customizable.

    Read the article

  • How to make a static route when using two internet connections?

    - by webmasters
    I have asked a question here on how to choose which applications will use a 3G internet connection and which applications will use the LAN. User harrymc gave a very complete and interesting answer, pointing that this is possible using static routes for certain websites. Now, lets say I want to access google.com only through my 3G internet connection. How would that static root look like? google has the IP: 173.194.39.180 here is a print of my route table, the 3G Modem has the IP: 10.81.132.96 +-----------------------------------------------------------------------------+ ¦ IPv4 Route Table ¦ ¦ =========================================================================== ¦ ¦ Active Routes: ¦ ¦ Network Destination Netmask Gateway Interface Metric ¦ ¦ 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.102 20 ¦ ¦ 0.0.0.0 0.0.0.0 10.81.132.97 10.81.132.111 286 ¦ ¦ 10.81.132.96 255.255.255.224 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.111 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.127 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 192.168.2.0 255.255.255.0 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.102 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 10.81.132.111 286 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 10.81.132.111 286 ¦ +-----------------------------------------------------------------------------+

    Read the article

  • How can I get a data usage/access log for an external hard-drive?

    - by Vittorio Vittori
    Hello, I'm working in an office with many people and sometimes I leave my external hard drive with my personal data inside. I would to know if there is some way to see if my hard disk was used during my absence. I'm not the computer administrator, so I can't use exclusive file permissions and I would really like to know hard disk is opened from another computer. I am using a Mac. Does exist some other way to protect personal data on usb device like an hard-drive? If yes can you write some link to possible guides? I hope there is some ploy!!

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >