Search Results

Search found 11839 results on 474 pages for 'email forwarding'.

Page 222/474 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• Reserving an IP with Netgear router from Time Warner

  - by Sergio Oliveira Jr.

  I tried everything but keep getting the following error: "Duplicated MAC address". Nothing is duplicated. I disconnected the PC that I would like to assign the IP. Basically this is important as I will configure some port forwarding and my notebook must always get the same IP from DHCP. This is called DHCP reservation but apparently is not working on this router. Has anyone being luck to have this working? The model is CG814WG and you have to click on LAN IP under web administration, -Sergio

  Read the article

• How to transition to Comcast with static IP address

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• Cannot change port 25 to port 587

  - by Steve

  I am using outlook 2003. My email provider is Cox. Trying to change my out going port to 587 so I send mail while traveling. Others I know on Cox have done this with succes, but they are using newer version of outlook. When I go to change my existing email accounts, outlook will not allow me to change the settings. I can delete 25, but it will not allow me to type in 587. What am I doing wrong?

  Read the article

• How do I get a hold of the Reply-To header and remunge it in postfix

  - by Mikhail

  I have a legacy application that emails via php. 5% of the emails aren't going through. The solution is to route all email through a fancy verified mail server like Amazon's SES. I am having some trouble implementing this functionality. It seems this guy had a similar problem. My question is where in postfix can I set a filter that will take as input the the message headers, so that I can manually set the From field and the Reply-To field to [email protected] and [email protected], respectively. Where whatever_php_wants is dictated by the php program and the users registration email. I know where to set the noreply portion, but I don't know the exact place in postfix's configuration files where I can intercept complete emails and pass them to a script. Edit So I want emails to look like: FROM: [email protected] REPLY-TO: the_users_address@their_email_service.com

  Read the article

• DNS Help (CNAMEs and A Records)

  - by Aaron Francis

  I'm trying to set up my DNS properly so that I can have hosting through PHPFog and email services using MailGun. PHPFog has us redirect the naked domain to the www and then use a CNAME to point the www to PHPFog and mailgun provides the MX records to use. The problem I'm having is that I have no A record set up on Hover because when I do, the CNAME no longer works (?), or at least it seems that way because I am no longer seeing my site from PHPFog, I'm seeing a Hover landing page. I know all the records I need, I just can't seem to get them to play nicely together. I've been told Amazon's Route 53 should be able to solve my problem, but I haven't yet figured out how. I just need to have hosting at PHPFog and email services through MailGun. As you can probably tell, I have only a very limited understanding of DNS, so forgive me if this is a silly question.

  Read the article

• Even googling not allowed ? Why ?

  - by sagar

  Please read message bellow. Access has been denied 127.0.0.1! Access to the page: http://www.google.co.in/search?hl=en&client=firefox-a&hs=F58&rls=org.mozilla%3Aen-US%3Aofficial&q=email+us&meta=&aq=f&aqi=g10&aql=&oq=&gs_rfai= ... has been denied for the following reason: Weighted phrase limit exceeded. By reading above message, you can easily understand that - it's a firewall message. I also know that. The problem is "Firewall" is allowing any kind of googling. But when I google "email us" - above message is displayed. My question is why does this happen ? ( means - why googling not allowed on this words ? ) ( Please don't tell that - contact your system administrator. ) What does this mean - Weighted phrase limit exceeded. ? sagar.

  Read the article

• Customize rsyslogd messages to show the sender of the message; not the receiver

  - by Nimmy Lebby

  I'm forwarding the WiFi router's log messages to our sysadmin box (sb3). This is the stanza in /etc/rsyslog.conf: # WiFi router log :fromhost-ip, isequal,'10.3.291.2' /var/log/wifi-router.log & ~ However, the log looks like this: Dec 23 10:41:58 sb3 dnsmasq-dhcp[253]: DHCPACK(br0) 10.3.292.133 xx:xx:xx:xx:xx:xx dg-ipad I want to customize so that anything logged to wifi-router.log does not mention sb3 but indicates the sender of the log message. How would I do this?

  Read the article

• How to transition to Comcast with static IP address [migrated]

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• Emails from Google Apps to custom SMTP server delayed by 1 hour consistently

  - by vimalk

  The outgoing mails from Google Apps/Gmail to our own custom SMTP server are getting delayed by 1 hour consistently. mxtoolbox.com diagnostics of our custom SMTP server are looking OK. Our custom SMTP server is receiving emails from other sources (yahoo, hotmail etc.) on time. Looking at the SMTP logs show a delay in a google intermediate SMTP server. Received: by qwi2 with SMTP id 2so1989393qwi.3 for <[email protected]>; Thu, 27 Jan 2011 03:54:23 -0800 (PST) MIME-Version: 1.0 Received: by 10.224.19.203 with SMTP id c11mr1587082qab.170.1296125657457; Thu, 27 Jan 2011 02:54:17 -0800 (PST) This setup has been working fine for a year though our custom email server was missing a reverse DNS entry and SPF records. Thinking that this could be the cause of the issue, we added these entries a week ago. But the issue still persists. Here are are more details: We are using Google Apps to host our primary domain email (say: mydomain.com) The custom SMTP server (say: s1.mydomain.com) hosts our subdomain (say: sub.mydomain.com) This is how the email log looks from [email protected] to [email protected] Return-Path: [email protected] Received: from localhost.localdomain (LHLO s1.mydomain.com) (127.0.0.1) by s1.mydomain.com with LMTP; Thu, 27 Jan 2011 17:24:28 +0530 (IST) Received: from localhost (localhost.localdomain [127.0.0.1]) by s1.mydomain.com (Postfix) with ESMTP id 605116A6565 for <[email protected]>; Thu, 27 Jan 2011 17:24:28 +0530 (IST) X-Virus-Scanned: amavisd-new at sub.mydomain.com X-Spam-Flag: NO X-Spam-Score: 2.984 X-Spam-Level: ** X-Spam-Status: No, score=2.984 tagged_above=-10 required=6.6 t ests=[AWL=-0.337, BAYES_50=0.001, DNS_FROM_OPENWHOIS=1.13, FH_DATE_PAST_20XX=3.188, HTML_MESSAGE=0.001, HTML_OBFUSCATE_05_10=0.001, RCVD_IN_DNSWL_LOW=-1] autolearn=no Received: from s1.mydomain.com ([127.0.0.1]) by localhost (s1.mydomain.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id RBjF7Wwr44mP for <[email protected]>; Thu, 27 Jan 2011 17:24:24 +0530 (IST) Received: from mail-qw0-f44.google.com (mail-qw0-f44.google.com [209.85.216.44]) by s1.mydomain.com (Postfix) with ESMTP id BB5DE6A6512 for <[email protected]>; Thu, 27 Jan 2011 17:24:23 +0530 (IST) Received: by qwi2 with SMTP id 2so1989393qwi.3 for <[email protected]>; Thu, 27 Jan 2011 03:54:23 -0800 (PST) MIME-Version: 1.0 Received: by 10.224.19.203 with SMTP id c11mr1587082qab.170.1296125657457; Thu, 27 Jan 2011 02:54:17 -0800 (PST) Received: by 10.220.117.17 with HTTP; Thu, 27 Jan 2011 02:54:17 -0800 (PST) Date: Thu, 27 Jan 2011 16:24:17 +0530 Message-ID: <[email protected]> Subject: test : 16:24 From: X <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=0015175cba2865a5fe049ad1c5cd We appreciate any help that could help solve this issue :)

  Read the article

• Nginx Reverse proxy + SYN Flood

  - by Bradley

  We're running a nginx reverse proxy cluster, forwarding traffic to our main website, this enables us to filter out unwanted traffic/users etc, and send them off else where, now we have a few issues with SYN floods where the requests a second is overflowing the proxy + the main server causing them to become unavailable. Is there any ip tables magic that can A) Rate limit SYN packets / connections to HTTP B) Block it all together if packets a second is malicious or any advice how to use limit_rate_zone in nginx, I've googled and tried to apply a few new results and none of them work and the websites are still unavailable.

  Read the article

• Configuring and managing Windows web server

  - by Mike C.

  Hello, I run a few websites and I was thinking of paying for a dedicated Windows web server from GoDaddy instead of paying for each site's hosting individually. I know enough about IIS to configure the Host Header and stuff like that, but I'm a little fuzzy about the email portion of the hosting. I have a few questions: Do I need to install an SMTP server on the web server to allow for emails to be sent/received to a website email address? Or is there another approach that I'm unaware of? Are there tools that monitor the amount of bandwidth used by the server? GoDaddy charges for bandwidth and I want to make sure I don't go over. Am I opening a can of worms that I don't really want to open by going the dedicated server route? Things like server updates, security, etc? Thanks!

  Read the article

• Domain transfer from Yahoo to Godaddy. Google apps downtime

  - by Kedar

  I am moving my domain from Yahoo to Godaddy (cause yahoo charges ridiculously hugh amounts than others). My problem is I use this domain for Google apps and one of those is my custom email. So here are a few questions that I have - 1) Godaddy told me there is going to be a 48 hours of downtime. Is there anything that I can do to minimize the downtime? 2) Will I lose all the email that I get during this downtime? or they be stored in the cloud and bulk emailed me once my domain is up with Godaddy? If they are lost is there any workaround to forward them to my gmail during the downtime (i know sounds stupid, but I have to ask). Any help is much appreciated. Thanks in advance.

  Read the article

• Postfix virtual_alias stealing emails from virutal_mailbox

  - by drewag

  I am trying to setup a "catchall" address. In my virtual_mailbox table I have emails setup like so: select * from virtual_users; id | domain_id | password | email ----+-----------+---------------------------------------------- 3 | 1 | ***************** | [email protected] 4 | 1 | ***************** | [email protected] That works great on its own. When I try to add a virtual alias for the catchall: select * from virtual_aliases; id | domain_id | source | destination ----+-----------+-------------------+--------------------------- 1 | 1 | @domain.com | [email protected] Once I add that virtual_alias, all email is going to catchall and I can send any to [email protected]. Is there something I need to do to shift around the priority? This is what I am getting in my postfix logs: Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: from=<[email protected]>, size=1712, nrcpt=1 (queue active) Oct 20 23:24:26 localhost postfix/lmtp[8148]: C23A711DF9: to=<[email protected]>, orig_to=<[email protected]>, relay=domain.com[private/dovecot-lmtp], delay=0.42, delays=0.4/0.01/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 <[email protected]> 8V9DA4q6ZFLVHwAA0J78UA Saved) Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: removed

  Read the article

• Problem with accents in Exchange 2010 smtp messages

  - by mickey

  Installing brand new Exchange 2010 server. Everything is working pretty good, except that when we send email from the smtp server directly (not from a windows client like outlook), french accents are being replaced with other (random) characters. We are experiencing this problem with email sent from php and different app that we developped in house. I can reproduce the problem by connecting with telnet to the smtp server on port 25. I've tried searching on the net, but haven't found much. Any idea?

  Read the article

• HP to Cisco spanning tree root flapping

  - by Tim Brigham

  Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

  Read the article

• Outlook activesync not pushing changes to devices

  - by Ryan Peters

  I recently set up my account outlook.com account and connected Outlook 2013 to it using ActiveSync. For a while, it was pushing changes I made, for example, from the web client to my phone and my Outlook when an email was deleted, moved, etc. The change was instant. Now all of a sudden, I have to manually refresh to see changes on either device. What happened? I just set up my wife's email account and it works fine, though she has no emails in it yet. I have several hundred. Why is mine not pushing sync changes and hers is? Thanks.

  Read the article

• What is a good and safe way of sharing certificates?

  - by Kaustubh P

  I have a few certificates, that are used as authentication, to ssh into my servers on the Amazon cloud. I rotate those certificates weekly, manually. My question is, I need to share the certificates with some colleagues, a few on the LAN, and a few in another part of the country. What is the best practice to share the certificate? My initial thoughts were Dropbox and email. We dont host dedicated email servers with encryption and all, and dont have a VPN. Thanks.

  Read the article

• How can you add two lines of text on a single line in Word 2010?

  - by deodorant

  Odd title, wasn't sure how to word it. Basically, I have two separate fonts I want to be on the same line, for resume purposes. My name is in a large font at the top, and I want my email and website address right-aligned directly beside it, one on top of the other. However, I want the email and website to combine to the same height as my name. Is this even possible with Word? Surely it is. Here is an awesome graphic of what I'm hoping for. Thanks! edit Seems new users can't post images. Link is here: http://i.stack.imgur.com/0gc3s.png

  Read the article

• What are some of the best wireless routers for a price-conscious home power-user?

  - by Alain

  I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

  Read the article

• MSMQ Resilience

  - by Paddy Carroll

  I have a requirement for a resilient MSMQ setup on VMWare ESX5. I am aware that we cannot allow the queue storage to be shared as it must be installed on physical disk mount, e.g. it cant be an CIFS or DFS Share. The following constraints apply: We don't use windows clustering We dont't rely on hot standbys Is there a way I can replicate the queue storage to another platform so that it can assume MSMQ duties on failure of the primary platforms using any method including queue forwarding?

  Read the article

• How to setup a host as a sendmail relay for particular IP subnet

  - by Abhinav

  Hi, By default, sendmail (I have version 8.13 on an RHEL4) allows only local mails. I wanted to allow mails from a particular network to be relayed via the system, so I did the following based on suggestions from various places : /etc/mail/access : Added the subnet and the domain 8.37 RELAY mydomain.com RELAY (I assume this is the originating email's domain) This alone did not work, so I added the following to sendmail.mc FEATURE(access_db)dbl Now, the problem is that it is allowing access from other domains as well. To test it out, I removed 8.37 RELAY from the access, and changed the email from field to [email protected] However, I still receive the mail. What is the correct way to configure this, so that only mails from a particular subnet are relayed ?

  Read the article

• "TCP Sweep" - What is it? How am I causing it?

  - by Stephen Melrose

  Hi there, I've just had an email from my hosting company telling me I'm in violation of their Acceptable Use Policy. They forwarded me an email from another company complaining about something to do with a "TCP sweep of port 22". They included a snippet from their logs, 20:29:43 <MY_SERVER_IP> 0.0.0.0 [TCP-SWEEP] (total=325,dp=22,min=212.1.191.0,max=212.1.191.255,Mar21-20:26:34,Mar21-20:26:34) (USI-amsxaid01) Now, my server knowledge is limited at best, and I've absolutely no idea what this is or what could be causing it. Any help would be greatly appreciated! Thank you

  Read the article

• Browsers not responding

  - by Jesper

  Hello, Strange thing started to happen to my computer yesterday, and I can not recall installing anything new or updating anything the last few days either. It was first the browser, Chromium, that started to freeze up and not respond for ages, say 10 minutes. Then my email, Windows Live Mail client started doing the same thing, I click on an email and the program goes "not responding" for 5-10 minutes. At first I thought it was Chromium, so i reinstalled it but no help, So i installed Opera and thought I would give it t a try, but not same thing is happening to Opera so it is clearly an OS issue or/and internet connection issue. Does anyone know what the problem can be? Im running Windows 7 32bit on a dual core Sony vaio laptop with 4gb ram. There is nothing wrong with the actual internet connection as it works fine on other computers on the network, and the connection it self does not drop. Grateful for any help, Jesper

  Read the article

• Creating an ad-hoc wireles network on a router

  - by bo7ons

  My router is a Wag200g with openwag firmware. My laptop is connected to the university's internet through an ethernet cable and i have to set the browser proxy settings to connect. I want to create an ad-hoc network with a router so that i can let my laptop do the proxy routing/forwarding itself and that my android phone can connect to it and use my university's proxy (I've tried setting the proxy on my phone but it wont work).. Or am i approaching this the wrong way?

  Read the article

• Using OpenVPN, yet netflix.com blocks access

  - by user837848

  I have set up an OpenVPN server on a VPS in the USA and configured it to route all clients traffic through it. Everything seems to work fine regarding the VPN connection in gerneral. All ip lookup sites show me the us server's ip address and even hulu.com works(it won't work if you are not in the usa). But for some reason netflix.com says "Sorry, Netflix is not available in your country yet.". So I thought that netflix probably uses some more sophisticated ways to determine your location beyond just your ip address. But I could not find a way to get it to work until I dropped the idea of using a VPN and instead connected to the server via a simple socks tunnel with ssh by running: ssh -D 9999 user@serverip All I had to do was changing the key network.proxy.socks_remote_dns in Firefox from false to true to prevent DNS leaks and setting up the socks proxy. Then I could finally watch netflix.com. As a result I concluded that there is nothing in the browser(or something like system timezone) that tells netflix the location, so it has to have something to do with the OpenVPN config. After that I used tcpdump to log all the traffic on the server's network interface venet0 (OpenVZ VPS), visited netflix.com on the client while first connected to the VPN and then connected via socks tunnel and afterwards compared both outputs. The only thing that caught my eye was that while using the socks tunnel the server mainly used ipv6 to connect to netflix whereas it only used ipv4 when the client was connected to the OpenVPN server. But I don't get how that could make such a difference. So what am I missing? Is there a way to configure OpenVPN to also use ipv6 to connect to a website although there is only an ipv4 connection between the VPS and the client? Here is the server.conf of the OpenVPN server (OpenVZ VPS) local serverip port 443 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/vps1.crt key ./easy-rsa2/keys/vps1.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" client-to-client keepalive 10 120 tls-auth ta.key 0 # This file is secret cipher AES-256-CBC comp-lzo max-clients 4 user nobody group nogroup persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 3 iptables forwarding iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j SNAT --to-source serverip (enabled ipv4 forwarding) I have tried everything always on a Win7 and a Debian client with only ipv4 connections and always made sure that they use the correct DNS server (tested with ipleak.net and tcpdump / wireshark). client.conf: client dev tun proto tcp remote serverip 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 cipher AES-256-CBC comb-lzo verb 3

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >