Search Results

Search found 36179 results on 1448 pages for 'generic list'.

Page 228/1448 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• This task is currently locked by a running workflow and cannot be edited. Limitation to both Nintex and SPD workflow

  - by ybbest

  Note, this post is from Nintex Forum here. These limitations apply to both SharePoint designer Workflow and Nintex Workflow as Nintex using the SharePoint workflow engine. The common cause that I experience is that ‘parent’ workflow is generating more than one task at once. This is common as you can have multiple approvers for certain approval process. You could also have workflow running when the task is created, one of the common scenario is you would like to set a custom column value in your approval task. For me this is huge limitation, as Nintex lover I really hope Nintex could solve this problem with Microsoft going forward. Introduction “This task is currently locked by a running workflow and cannot be edited” is a common message that is seen when an error occurs while the SharePoint workflow engine is processing a task item associated with a workflow. When a workflow processes a task normally, the following sequence of events is expected to occur: 1.       The process begins. 2.       The workflow places a ‘lock’ on the task so nothing else can change the values while the workflow is processing. 3.       The workflow processes the task. 4.       The lock is released when the task processing is finished. When the message is encountered, it usually indicates that an error occurred between step 2 and 4. As a result, the lock is never released. Therefore, the ‘task locked’ message is not an error itself, rather a symptom of another error – the ‘task locked’ message does not indicate what went wrong. In most cases, once this message is encountered, the workflow cannot be made to continue and must be terminated and started again. The following is a guide that can help troubleshoot the cause of these messages.  Some initial observations to narrow down the potential causes are: Is the error consistent or intermittent? When the error is consistent, it will happen every time the workflow is run. When it is intermittent, it may happen regularly, but not every time. Does the error occur the first time the user tries to respond to a task, or do they respond and notice the workflow does not continue, and when they respond again the error occurs? If the message is present when the user first responds to the task, the issue would have occurred when the task was created. Otherwise, it would have occurred when the user attempted to respond to the task. Causes Modifying the task list A cause of this error appearing consistently the first time a user tries to respond to a task is a modification to the default task list schema. For example, changing the ‘Assigned to’ field in a task list to be a multiple selection will cause the behaviour. Deleting the workflow task then restoring it from the Recycle bin If you start a workflow, delete the workflow task then restore it from the Recycle Bin in SharePoint, the workflow will fail with the ‘task locked’ error.  This is confirmed behaviour whether using a SharePoint Designer or a Nintex workflow.  You will need to terminate the workflow and start it again. Parallel simultaneous responses A cause of this error appearing inconsistently is multiple users responding to tasks in parallel at the same time. In this scenario, one task will complete correctly and the other will not process. When the user tries again, the ‘task locked’ message will display. Nintex included a workaround for this issue in build 11000. In build 11000 and later, one of the users will receive a message on the task form when they attempt to respond, stating that they need to try again in a few moments. Additional processing on the task A cause of this error appearing consistently and inconsistently is having an additional system running on the items in the task list. Some examples include: a workflow running on the task list, an event receiver running on the task list or another automated process querying and updating workflow tasks. Note: This Microsoft help article (http://office.microsoft.com/en-us/sharepointdesigner/HA102376561033.aspx#5) explains creating a workflow that runs on the task list to update a field on the task. Our experience shows that this causes the ‘Task Locked’ issues when the ‘parent’ workflow is generating more than one task at once. Isolated system error If the error is a rare event, or a ‘one off’ event, then an isolated system error may have occurred. For example, if there is a database connectivity issue while the workflow is processing the task response, the task will lock. In this case, the user will respond to a task but the workflow will not continue. When they respond again, the ‘task locked’ message will display. In this case, there will be an error in the SharePoint ULS Logs at the time that the user originally responded. Temporary delay while workflow processes If the workflow is taking a long time to process after a user submits a task, they may notice and try to respond to the task again. They will see the task locked error, but after a number of attempts (or after waiting some time) the task response page eventually indicates the task has been responded to. In this case, nothing actually went wrong, and the error message gives an accurate indication of what is happening – the workflow temporarily locked the task while it was processing. This scenario may occur in a very large workflow, or after the SharePoint application pool has just started. Modifying the task via a web service with an invalid url If the Nintex Workflow web service is used to respond to or delegate a task, the site context part of the url must be a valid alternative access mapping url. For example, if you access the web service via the IP address of the SharePoint server, and the IP address is not a valid AAM, the task can become locked. The workflow has become stuck without any apparent errors This behaviour can occur as a result of a bug in the SharePoint 2010 workflow engine.  If you do not have the August 2010 Cumulative Update (or later) for SharePoint, and your workflow uses delays, “Flexi-task”, State machine”, “Task Reminder” actions or variables, you could be affected. Check the SharePoint 2010 Updates site here: http://technet.microsoft.com/en-us/sharepoint/ff800847.  The October CU is recommended http://support.microsoft.com/kb/2553031.   The fix is described as “Consider the following scenario. You add a Delay activity to a workflow. Then, you set the duration for the Delay activity. You deploy the workflow in SharePoint Foundation 2010. In this scenario, the workflow is not resumed after the duration of the Delay activity”. If you find this is occurring in your environment, install the October CU, terminate all the running workflows affected and run them afresh. Investigative steps The first step to isolate the issue is to create a new task list on the site and configure the workflow to use it.  Any customizations that were made to the original task list should not be made to the new task list. If the new task list eliminates the issue, then the cause can be attributed to the original task list or a change that was made to it. To change the task list that the workflow uses: In Workflow Designer select Settings -> Startup Options Then configure the task list as required If any of the scenarios above do not help, check the SharePoint logs for any messages with a category of ‘Workflow Infrastructure’. Conclusion The information in this article has been gathered from observations and investigations by Nintex. The sources of these issues are the underlying SharePoint workflow engine. This article will be updated if further causes are discovered. From <http://connect.nintex.com/forums/thread/6503.aspx>

  Read the article

• Does Altova StyleVision support generation of these specific Word XML Word ML List Numbering Bullet Markup? Extend with custom external XSLT?

  - by Alex S

  Does Altova StyleVision support generation of these specific Word XML Word ML List Numbering Bullet Markup? Extend with custom external XSLT? PS: I know is specific to Altova and their Dev Tools, but just like Eclipse and Visual Studio it is one of the widest used toolkits for XML related development & programming. So, please do not hate, ban or give negative. Linked below is a section of information for Word ML XML and its numbering, list, bullet etc. The markup is pretty extensive. I am wondering if this can be replicated via StyleVision or is this a limitation that needs to extended with an external XSLT? Quote: Key links to the Markup Documentation: http://officeopenxml.com/WPnumbering.php http://officeopenxml.com/WPnumberingAbstractNum.php Also: /WPnumberingLvl.php Short outline of the Documentation there: *Numbering, Levels and Lists* - Overview - Defining a Numbering Scheme - Defining a Particular Level ++ Numbering Level Text ++ Numbering Format ++ Displaying as Numerals Only ++ Restart Numbering ++ Picture or Image as Numbering Symbol ++ Justification ++ Overriding a Numbering Definition If StyleVision supports the above, where and how inside StyleVision can I access or use these properties/ attributes for the markup? From what I've gathered, I think it does not. In the past, I have written XSL-FO and XSL-WordML by hand. So I could write an add-on external XSLT containing Word specific markup for this purpose. *Given the limitation exists, the questions now: * Where and how do I create and linked inside of StyleVision so as to APPLY and EXTEND these capability limitations of StyleVision. AND How could I make it apply only for Word ML / Word XML output styling and be DEACTIVATED/ DISABLED for HTML and PDF output?

  Read the article

• Synchronize Data between a Silverlight ListBox and a User Control

  - by psheriff

  One of the great things about XAML is the powerful data-binding capabilities. If you load up a list box with a collection of objects, you can display detail data about each object without writing any C# or VB.NET code. Take a look at Figure 1 that shows a collection of Product objects in a list box. When you click on a list box you bind the current Product object selected in the list box to a set of controls in a user control with just a very simple Binding statement in XAML.  Figure 1: Synchronizing a ListBox to a User Control is easy with Data Binding Product and Products Classes To illustrate this data binding feature I am going to just create some local data instead of using a WCF service. The code below shows a Product class that has three properties, namely, ProductId, ProductName and Price. This class also has a constructor that takes 3 parameters and allows us to set the 3 properties in an instance of our Product class. C#public class Product{  public Product(int productId, string productName, decimal price)  {    ProductId = productId;    ProductName = productName;    Price = price;  }   public int ProductId { get; set; }  public string ProductName { get; set; }  public decimal Price { get; set; }} VBPublic Class Product  Public Sub New(ByVal _productId As Integer, _                 ByVal _productName As String, _                 ByVal _price As Decimal)    ProductId = _productId    ProductName = _productName    Price = _price  End Sub   Private mProductId As Integer  Private mProductName As String  Private mPrice As Decimal   Public Property ProductId() As Integer    Get      Return mProductId    End Get    Set(ByVal value As Integer)      mProductId = value    End Set  End Property   Public Property ProductName() As String    Get      Return mProductName    End Get    Set(ByVal value As String)      mProductName = value    End Set  End Property   Public Property Price() As Decimal    Get      Return mPrice    End Get    Set(ByVal value As Decimal)      mPrice = value    End Set  End PropertyEnd Class To fill up a list box you need a collection class of Product objects. The code below creates a generic collection class of Product objects. In the constructor of the Products class I have hard-coded five product objects and added them to the collection. In a real-world application you would get your data through a call to service to fill the list box, but for simplicity and just to illustrate the data binding, I am going to just hard code the data. C#public class Products : List<Product>{  public Products()  {    this.Add(new Product(1, "Microsoft VS.NET 2008", 1000));    this.Add(new Product(2, "Microsoft VS.NET 2010", 1000));    this.Add(new Product(3, "Microsoft Silverlight 4", 1000));    this.Add(new Product(4, "Fundamentals of N-Tier eBook", 20));    this.Add(new Product(5, "ASP.NET Security eBook", 20));  }} VBPublic Class Products  Inherits List(Of Product)   Public Sub New()    Me.Add(New Product(1, "Microsoft VS.NET 2008", 1000))    Me.Add(New Product(2, "Microsoft VS.NET 2010", 1000))    Me.Add(New Product(3, "Microsoft Silverlight 4", 1000))    Me.Add(New Product(4, "Fundamentals of N-Tier eBook", 20))    Me.Add(New Product(5, "ASP.NET Security eBook", 20))  End SubEnd Class The Product Detail User Control Below is a user control (named ucProduct) that is used to display the product detail information seen in the bottom portion of Figure 1. This is very basic XAML that just creates a text block and a text box control for each of the three properties in the Product class. Notice the {Binding Path=[PropertyName]} on each of the text box controls. This means that if the DataContext property of this user control is set to an instance of a Product class, then the data in the properties of that Product object will be displayed in each of the text boxes. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.ucProduct"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  HorizontalAlignment="Left"  VerticalAlignment="Top">  <Grid Margin="4">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />    </Grid.RowDefinitions>    <Grid.ColumnDefinitions>      <ColumnDefinition MinWidth="120" />      <ColumnDefinition />    </Grid.ColumnDefinitions>    <TextBlock Grid.Row="0"               Grid.Column="0"               Text="Product Id" />    <TextBox Grid.Row="0"             Grid.Column="1"             Text="{Binding Path=ProductId}" />    <TextBlock Grid.Row="1"               Grid.Column="0"               Text="Product Name" />    <TextBox Grid.Row="1"             Grid.Column="1"             Text="{Binding Path=ProductName}" />    <TextBlock Grid.Row="2"               Grid.Column="0"               Text="Price" />    <TextBox Grid.Row="2"             Grid.Column="1"             Text="{Binding Path=Price}" />  </Grid></UserControl> Synchronize ListBox with User Control You are now ready to fill the list box with the collection class of Product objects and then bind the SelectedItem of the list box to the Product detail user control. The XAML below is the complete code for Figure 1. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.MainPage"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS"  VerticalAlignment="Top"  HorizontalAlignment="Left">  <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources>  <Grid x:Name="LayoutRoot"        Margin="4"        Background="White">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="*" />    </Grid.RowDefinitions>    <ListBox x:Name="lstData"             Grid.Row="0"             BorderBrush="Black"             BorderThickness="1"             ItemsSource="{Binding                   Source={StaticResource productCollection}}"             DisplayMemberPath="ProductName" />    <src:ucProduct x:Name="prodDetail"                   Grid.Row="1"                   DataContext="{Binding ElementName=lstData,                                          Path=SelectedItem}" />  </Grid></UserControl> The first step to making this happen is to reference the Silverlight project (SL_SyncListBoxAndUserControl_CS) where the Product and Products classes are located. I added this namespace and assigned it a namespace prefix of “src” as shown in the line below: xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS" Next, to use the data from an instance of the Products collection, you create a UserControl.Resources section in the XAML and add a tag that creates an instance of the Products class and assigns it a key of “productCollection”.   <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources> Next, you bind the list box to this productCollection object using the ItemsSource property. You bind the ItemsSource of the list box to the static resource named productCollection. You can then set the DisplayMemberPath attribute of the list box to any property of the Product class that you want. In the XAML below I used the ProductName property. <ListBox x:Name="lstData"         ItemsSource="{Binding             Source={StaticResource productCollection}}"         DisplayMemberPath="ProductName" /> You now need to create an instance of the ucProduct user contol below the list box. You do this by once again referencing the “src” namespace and typing in the name of the user control. You then set the DataContext property on this user control to a binding. The binding uses the ElementName attribute to bind to the list box name, in this case “lstData”. The Path of the data is SelectedItem. These two attributes together tell Silverlight to bind the DataContext to the selected item of the list box. That selected item is a Product object. So, once this is bound, the bindings on each text box in the user control are updated and display the current product information. <src:ucProduct x:Name="prodDetail"               DataContext="{Binding ElementName=lstData,                                      Path=SelectedItem}" /> Summary Once you understand the basics of data binding in XAML, you eliminate a lot code that is otherwise needed to move data into controls and out of controls back into an object. Connecting two controls together is easy by just binding using the ElementName and Path properties of the Binding markup extension. Another good tip out of this blog is use user controls and set the DataContext of the user control to have all of the data on the user control update through the bindings. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Synchronize List Box Data with User Control" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

  Read the article

• JList - deselect when clicking an already selected item

  - by Peter

  If a selected index on a JList is clicked, I want it to de-select. In other words, clicking on the indices actually toggles their selection. Didn't look like this was supported, so I tried list.addMouseListener(new MouseAdapter() { public void mousePressed(MouseEvent evt) { java.awt.Point point = evt.getPoint(); int index = list.locationToIndex(point); if (list.isSelectedIndex(index)) list.removeSelectionInterval(index, index); } }); The problem here is that this is being invoked after JList has already acted on the mouse event, so it deselects everything. So then I tried removing all of JList's MouseListeners, adding my own, and then adding all of the default listeners back. That didn't work, since JList would reselect the index after I had deselected it. Anyway, what I eventually came up with is MouseListener[] mls = list.getMouseListeners(); for (MouseListener ml : mls) list.removeMouseListener(ml); list.addMouseListener(new MouseAdapter() { public void mousePressed(MouseEvent evt) { java.awt.Point point = evt.getPoint(); final int index = list.locationToIndex(point); if (list.isSelectedIndex(index)) SwingUtilities.invokeLater(new Runnable() { public void run() { list.removeSelectionInterval(index, index); } }); } }); for (MouseListener ml : mls) list.addMouseListener(ml); ... and that works. But I don't like it. Is there a better way?

  Read the article

• Subterranean IL: Constructor constraints

  - by Simon Cooper

  The constructor generic constraint is a slightly wierd one. The ECMA specification simply states that it: constrains [the type] to being a concrete reference type (i.e., not abstract) that has a public constructor taking no arguments (the default constructor), or to being a value type. There seems to be no reference within the spec to how you actually create an instance of a generic type with such a constraint. In non-generic methods, the normal way of creating an instance of a class is quite different to initializing an instance of a value type. For a reference type, you use newobj: newobj instance void IncrementableClass::.ctor() and for value types, you need to use initobj: .locals init ( valuetype IncrementableStruct s1 ) ldloca 0 initobj IncrementableStruct But, for a generic method, we need a consistent method that would work equally well for reference or value types. Activator.CreateInstance<T> To solve this problem the CLR designers could have chosen to create something similar to the constrained. prefix; if T is a value type, call initobj, and if it is a reference type, call newobj instance void !!0::.ctor(). However, this solution is much more heavyweight than constrained callvirt. The newobj call is encoded in the assembly using a simple reference to a row in a metadata table. This encoding is no longer valid for a call to !!0::.ctor(), as different constructor methods occupy different rows in the metadata tables. Furthermore, constructors aren't virtual, so we would have to somehow do a dynamic lookup to the correct method at runtime without using a MethodTable, something which is completely new to the CLR. Trying to do this in IL results in the following verification error: newobj instance void !!0::.ctor() [IL]: Error: Unable to resolve token. This is where Activator.CreateInstance<T> comes in. We can call this method to return us a new T, and make the whole issue Somebody Else's Problem. CreateInstance does all the dynamic method lookup for us, and returns us a new instance of the correct reference or value type (strangely enough, Activator.CreateInstance<T> does not itself have a .ctor constraint on its generic parameter): .method private static !!0 CreateInstance<.ctor T>() { call !!0 [mscorlib]System.Activator::CreateInstance<!!0>() ret } Going further: compiler enhancements Although this method works perfectly well for solving the problem, the C# compiler goes one step further. If you decompile the C# version of the CreateInstance method above: private static T CreateInstance() where T : new() { return new T(); } what you actually get is this (edited slightly for space & clarity): .method private static !!T CreateInstance<.ctor T>() { .locals init ( [0] !!T CS$0$0000, [1] !!T CS$0$0001 ) DetectValueType: ldloca.s 0 initobj !!T ldloc.0 box !!T brfalse.s CreateInstance CreateValueType: ldloca.s 1 initobj !!T ldloc.1 ret CreateInstance: call !!0 [mscorlib]System.Activator::CreateInstance<T>() ret } What on earth is going on here? Looking closer, it's actually quite a clever performance optimization around value types. So, lets dissect this code to see what it does. The CreateValueType and CreateInstance sections should be fairly self-explanatory; using initobj for value types, and Activator.CreateInstance for reference types. How does the DetectValueType section work? First, the stack transition for value types: ldloca.s 0 // &[!!T(uninitialized)] initobj !!T // ldloc.0 // !!T box !!T // O[!!T] brfalse.s // branch not taken When the brfalse.s is hit, the top stack entry is a non-null reference to a boxed !!T, so execution continues to to the CreateValueType section. What about when !!T is a reference type? Remember, the 'default' value of an object reference (type O) is zero, or null. ldloca.s 0 // &[!!T(null)] initobj !!T // ldloc.0 // null box !!T // null brfalse.s // branch taken Because box on a reference type is a no-op, the top of the stack at the brfalse.s is null, and so the branch to CreateInstance is taken. For reference types, Activator.CreateInstance is called which does the full dynamic lookup using reflection. For value types, a simple initobj is called, which is far faster, and also eliminates the unboxing that Activator.CreateInstance has to perform for value types. However, this is strictly a performance optimization; Activator.CreateInstance<T> works for value types as well as reference types. Next... That concludes the initial premise of the Subterranean IL series; to cover the details of generic methods and generic code in IL. I've got a few other ideas about where to go next; however, if anyone has any itching questions, suggestions, or things you've always wondered about IL, do let me know.

  Read the article

• Left Join in Subsonic 3

  - by user303187

  I'm trying to do a left join in subsonic 3 using linq but it doesn't seem to work, I get a big error. var post = from p in Post.All() join q in Quote.All() on p.ID equals q.PostID into pq where p.ID == id.Value from qt in pq.DefaultIfEmpty() select new {p, qt}; I'm using subsonic 3, latest GIT version from Rob, but I'm getting an error, see below, when I try a left join. I have searched but I didn't found any solution. Can anyone explain to me why the error and how to fix it? Thanks Expression of type 'System.Collections.Generic.IEnumerable1[GetAQuote.Post]' cannot be used for parameter of type 'System.Linq.IQueryable1[GetAQuote.Post]' of method 'System.Linq.IQueryable1[<>f__AnonymousType221[GetAQuote.Post], System.Collections.Generic.IEnumerable1%5BGetAQuote.Quote%5D, System.Linq.Expressions.Expression1[System.Func2%5BGetAQuote.Post,System.Int32%5D%5D, System.Linq.Expressions.Expression1[System.Func2%5BGetAQuote.Quote,System.Int32%5D%5D, System.Linq.Expressions.Expression1[System.Func3%5BGetAQuote.Post,System.Collections.Generic.IEnumerable1[GetAQuote.Quote],<>f__AnonymousType22%5BGetAQuote.Post,System.Collections.Generic.IEnumerable1%5BGetAQuote.Quote%5D%5D%5D%5D"GetAQuote.Post,System.Collections.Generic.IEnumerable1[GetAQuote.Quote]]] GroupJoin[Post,Quote,Int32,<f__AnonymousType22'`

  Read the article

• Why enumerator structs are a really bad idea

  - by Simon Cooper

  If you've ever poked around the .NET class libraries in Reflector, I'm sure you would have noticed that the generic collection classes all have implementations of their IEnumerator as a struct rather than a class. As you will see, this design decision has some rather unfortunate side effects... As is generally known in the .NET world, mutable structs are a Very Bad Idea; and there are several other blogs around explaining this (Eric Lippert's blog post explains the problem quite well). In the BCL, the generic collection enumerators are all mutable structs, as they need to keep track of where they are in the collection. This bit me quite hard when I was coding a wrapper around a LinkedList<int>.Enumerator. It boils down to this code: sealed class EnumeratorWrapper : IEnumerator<int> { private readonly LinkedList<int>.Enumerator m_Enumerator; public EnumeratorWrapper(LinkedList<int> linkedList) { m_Enumerator = linkedList.GetEnumerator(); } public int Current { get { return m_Enumerator.Current; } } object System.Collections.IEnumerator.Current { get { return Current; } } public bool MoveNext() { return m_Enumerator.MoveNext(); } public void Reset() { ((System.Collections.IEnumerator)m_Enumerator).Reset(); } public void Dispose() { m_Enumerator.Dispose(); } } The key line here is the MoveNext method. When I initially coded this, I thought that the call to m_Enumerator.MoveNext() would alter the enumerator state in the m_Enumerator class variable and so the enumeration would proceed in an orderly fashion through the collection. However, when I ran this code it went into an infinite loop - the m_Enumerator.MoveNext() call wasn't actually changing the state in the m_Enumerator variable at all, and my code was looping forever on the first collection element. It was only after disassembling that method that I found out what was going on The MoveNext method above results in the following IL: .method public hidebysig newslot virtual final instance bool MoveNext() cil managed { .maxstack 1 .locals init ( [0] bool CS$1$0000, [1] valuetype [System]System.Collections.Generic.LinkedList`1/Enumerator CS$0$0001) L_0000: nop L_0001: ldarg.0 L_0002: ldfld valuetype [System]System.Collections.Generic.LinkedList`1/Enumerator EnumeratorWrapper::m_Enumerator L_0007: stloc.1 L_0008: ldloca.s CS$0$0001 L_000a: call instance bool [System]System.Collections.Generic.LinkedList`1/Enumerator::MoveNext() L_000f: stloc.0 L_0010: br.s L_0012 L_0012: ldloc.0 L_0013: ret } Here, the important line is 0002 - m_Enumerator is accessed using the ldfld operator, which does the following: Finds the value of a field in the object whose reference is currently on the evaluation stack. So, what the MoveNext method is doing is the following: public bool MoveNext() { LinkedList<int>.Enumerator CS$0$0001 = this.m_Enumerator; bool CS$1$0000 = CS$0$0001.MoveNext(); return CS$1$0000; } The enumerator instance being modified by the call to MoveNext is the one stored in the CS$0$0001 variable on the stack, and not the one in the EnumeratorWrapper class instance. Hence why the state of m_Enumerator wasn't getting updated. Hmm, ok. Well, why is it doing this? If you have a read of Eric Lippert's blog post about this issue, you'll notice he quotes a few sections of the C# spec. In particular, 7.5.4: ...if the field is readonly and the reference occurs outside an instance constructor of the class in which the field is declared, then the result is a value, namely the value of the field I in the object referenced by E. And my m_Enumerator field is readonly! Indeed, if I remove the readonly from the class variable then the problem goes away, and the code works as expected. The IL confirms this: .method public hidebysig newslot virtual final instance bool MoveNext() cil managed { .maxstack 1 .locals init ( [0] bool CS$1$0000) L_0000: nop L_0001: ldarg.0 L_0002: ldflda valuetype [System]System.Collections.Generic.LinkedList`1/Enumerator EnumeratorWrapper::m_Enumerator L_0007: call instance bool [System]System.Collections.Generic.LinkedList`1/Enumerator::MoveNext() L_000c: stloc.0 L_000d: br.s L_000f L_000f: ldloc.0 L_0010: ret } Notice on line 0002, instead of the ldfld we had before, we've got a ldflda, which does this: Finds the address of a field in the object whose reference is currently on the evaluation stack. Instead of loading the value, we're loading the address of the m_Enumerator field. So now the call to MoveNext modifies the enumerator stored in the class rather than on the stack, and everything works as expected. Previously, I had thought enumerator structs were an odd but interesting feature of the BCL that I had used in the past to do linked list slices. However, effects like this only underline how dangerous mutable structs are, and I'm at a loss to explain why the enumerators were implemented as structs in the first place. (interestingly, the SortedList<TKey, TValue> enumerator is a struct but is private, which makes it even more odd - the only way it can be accessed is as a boxed IEnumerator!). I would love to hear people's theories as to why the enumerators are implemented in such a fashion. And bonus points if you can explain why LinkedList<int>.Enumerator.Reset is an explicit implementation but Dispose is implicit... Note to self: never ever ever code a mutable struct.

  Read the article

• Iterative Cartesian Product in Java

  - by akappa

  Hi, I want to compute the cartesian product of an arbitrary number of nonempty sets in Java. I've wrote that iterative code... public static <T> List<Set<T>> cartesianProduct(List<Set<T>> list) { List<Iterator<T>> iterators = new ArrayList<Iterator<T>>(list.size()); List<T> elements = new ArrayList<T>(list.size()); List<Set<T>> toRet = new ArrayList<Set<T>>(); for (int i = 0; i < list.size(); i++) { iterators.add(list.get(i).iterator()); elements.add(iterators.get(i).next()); } for (int j = 1; j >= 0;) { toRet.add(Sets.newHashSet(elements)); for (j = iterators.size()-1; j >= 0 && !iterators.get(j).hasNext(); j--) { iterators.set(j, list.get(j).iterator()); elements.set(j, iterators.get(j).next()); } elements.set(Math.abs(j), iterators.get(Math.abs(j)).next()); } return toRet; } ...but I found it rather inelegant. Someone has a better, still iterative solution? A solution that uses some wonderful functional-like approach? Otherwise... suggestion about how to improve it? Errors? Thanks :)

  Read the article

• Is there a more efficient AS3 way to compare 2 arrays for adds, removes & updates?

  - by WillyCornbread

  Hi all - I'm wondering if there is a better way to approach this than my current solution... I have a list of items, I then retrieve another list of items. I need to compare the two lists and come up with a list of items that are existing (for update), a list that are not existing in the new list (for removal) and a list of items that are not existing in the old list (for adding). Here is what I'm doing now - basically creating a lookup object for testing if an item exists. Thanks for any tips. for each (itm in _oldItems) { _oldLookup[itm.itemNumber] = itm; } // Loop through items and check if they already exist in the 'old' list for each (itm in _items) { // If an item exists in the old list - push it for update if (_oldLookup[itm.itemNumber]) { _itemsToUpdate.push(itm); } else // otherwise push it into the items to add { _itemsToAdd.push(itm); } // remove it from the lookup list - this will leave only // items for removal remaining in the lookup delete _oldLookup[itm.itemNumber]; } // The items remaining in the lookup object have neither been added or updated - // so they must be for removal - add to list for removal for each (itm in _oldLookup) { _itemsToRemove.push(itm); }

  Read the article

• Unable to boot: Missing Operating system

  - by Vivek S Panicker

  i had installed Ubuntu 11.10 along with the another Ubuntu 11.10 which already installed in my netbook. Later I formatted the partition I newly installed. Next time when I boot it went to Grub Rescue menu. I boot my system again with Ubuntu USB stick, Then I installed Boot repair package in USB and restored MBR and GRUB menu in hard disk. Now when I am restarting, I am getting a message Missing operating system, press any key to continue. Can somebody help me on this? Below is the output for sudo fdisk -l omitting empty partition (7) Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00058a60 Device Boot Start End Blocks Id System /dev/sda1 * 2048 204072287 102035120 83 Linux /dev/sda2 204072958 312580095 54253569 5 Extended /dev/sda5 310507520 312580095 1036288 82 Linux swap / Solaris /dev/sda6 308432896 310503423 1035264 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 4006 MB, 4006608896 bytes 124 heads, 62 sectors/track, 1017 cylinders, total 7825408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004d3df Device Boot Start End Blocks Id System /dev/sdb1 * 62 7818695 3909317 b W95 FAT32 Below is the output for sudo blkid /dev/loop0: TYPE="squashfs" /dev/loop1: LABEL="casper-rw" UUID="533defb1-f073-254a-b46f-7ca0ac1f4e0c" TYPE="ext2" /dev/sda1: LABEL="Ubuntu" UUID="6a141040-3ba8-457a-9de5-ad06e6057084" TYPE="ext4" /dev/sda5: UUID="3a7f62d6-9c65-4d12-a3b6-5d62b9710f7d" TYPE="swap" /dev/sda6: UUID="274da115-cec2-4418-a1af-88fe921e3670" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="EC22-6BE4" TYPE="vfat" File /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

  Read the article

• Can't see my partitions after grub recovery

  - by dimbo

  I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

  Read the article

• drupal bootstrap script: how to get list of all nodes of type x?

  - by groovehunter

  hi. I create a custom import and export, at the moment as an external script (via bootstrap), i plan to create a module in a more generic fashion lateron. I am building a frontend for nagios and for our host management and nagios configuration btw. Maybe it might become useful for other environments (networkmanagement) Now i need to know how to get list of all nodes of type x? I want to avoid direct SQL. A suggestion i got was to make an rss and parse it but i acess the drupal db a dozen times to extract various nodes, so it feels strange to do a web request for one thing So what i am looking for as newbie drupal dev is just a pointer to basic search module api for this task TIA florian

  Read the article

• Remove pointer object whose reference is mantained in three different lists

  - by brainydexter

  I am not sure how to approach this problem: 'Player' class mantains a list of Bullet* objects: class Player { protected: std::list< Bullet* > m_pBullet_list; } When the player fires a Bullet, it is added to this list. Also, inside the constructor of bullet, a reference of the same object is updated in CollisionMgr, where CollisionMgr also mantains a list of Bullet*. Bullet::Bullet(GameGL*a_pGameGL, Player*a_pPlayer) : GameObject( a_pGameGL ) { m_pPlayer = a_pPlayer; m_pGameGL->GetCollisionMgr()->AddBullet(this); } class CollisionMgr { void AddBullet(Bullet* a_pBullet); protected: std::list< Bullet*> m_BulletPList; } In CollisionMgr.Update(); based on some conditions, I populate class Cell which again contain a list of Bullet*. Finally, certain conditions qualify a Bullet to be deleted. Now, these conditions are tested upon while iterating through a Cell's list. So, if I have to delete the Bullet object, from all these places, how should I do it so that there are no more dangling references to it? std::list< Bullet*>::iterator bullet_it; for( bullet_it = (a_pCell->m_BulletPList).begin(); bullet_it != (a_pCell->m_BulletPList).end(); bullet_it++) { bool l_Bullet_trash = false; Bullet* bullet1 = *bullet_it; // conditions would set this to true if ( l_Bullet_Trash ) // TrashBullet( bullet1 ); continue; } Also, I was reading about list::remove, and it mentions that it calls the destructor of the object we are trying to delete. Given this info, if I delete from one list, the object does not exist, but the list would still contain a reference to it..How do I handle all these problems ? Can someone please help me here ? Thanks PS: If you want me to post more code or provide explanation, please do let me know.

  Read the article

• Whose fault is a NullReferenceException?

  - by stefan.at.wpf

  I'm currently working on a class which exposes an internal List through a property. The List shall and can be modified. The problem is, entries in the internal list could be set to null from outside the class. My code actually looks like this: class ClassWithList { List<object> _list = new List<object>(); // get accessor, which however returns the reference to the list, // therefore the list can be modified (this is intended) public List<object> Data { get { return _list; } } private void doSomeWorkWithTheList() { foreach(object obj in _list) // do some work with the objects in the list without checking for null. } } So now in the doSomeWorkWithTheList() I could always check whether the current list entry is null or I could just asume that the person using this class doesn't have the great idea to set entries to null. So finally the questions end up in: Whose fault is a NullReferenceException in this case? Is it the fault of the class developer not checking everything for null (which would make code generally - not only in this class - more complex) or is it the fault of the user of this class, as setting a List entry to null doesn't really make sense? I'd tend to generally not check values for null except in some really special cases. Is this a bad style or de facto standard / standard in praxis? I know there's probably no ultimate answer for this, I'm just missing enough experience for such thing and therefore wondering what other developers think about such cases and want to hear what's done in reality about checking null (or not).

  Read the article

• How do you set a variable to be an empty, but workable Jquery object?

  - by KallDrexx

  Outside of a for I declare a variable using var list;. I use this variable inside of my for loop like so: // add the html to the list if (list == undefined) list = item; else list.append(item.contents()); item is a cloned jquery object build from a $('list_template').clone(); call (list_template is a div with <li> elements inside). What I am doing is creating a list, which I will then appendTo() where I need it. Right now this code works fine, but it doesn't seem right to me. Unfortunatly, I cannot seem to figure out how to correctly declare the list variable to be an empty Jquery object. I have tried both: var list = $([]); var list = $(''); Both of those cause the append to not work correctly (or as expected) with list.html() being null. Is there a way to initialize my variable to an empty jquery object, so all I have to do is list.append(item.contents()); without the if/else statements?

  Read the article

• How do I write a bash script to replace words in files and then rename files?

  - by Jason

  Hi All, I have a folder structure, as shown below: I need to create a bash script that does 4 things: It searches all the files in the generic directory and finds the string 'generic' and makes it into 'something' As above, but changes "GENERIC" to "SOMETHING" As above, but changes "Generic" to "Something" Renames any filename that has "generic" in it with "something" Right now I am doing this process manually by using the search and replace in net beans. I dont know much about bash scripting, but i'm sure this can be done. I'm thinking of something that I would run and it would take "Something" as the input. Where would I start? what functions should I use? overall guidance would be great. thanks. I am using Ubuntu 10.5 desktop edition.

  Read the article

• How to send keypresses from qt application to libvlc

  - by anon

  I need to send keypresses from my application window to libvlc, how do i do that? I tried using varSetInteger but then i got the following error error: ‘var_SetInteger’ was not declared in this scope so i searched for the file in which var_SetInteger was defined and found that it was defined in vlc_variables.h so in included it and got the following error. What am i missing? ../vlc-0.9.10/include/vlc_variables.h:121: error: ‘__var_Create’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:121: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:121: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:121: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:121: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:122: error: ‘__var_Destroy’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:122: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:122: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:122: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:122: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:124: error: ‘__var_Change’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:124: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:124: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:124: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:124: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:126: error: ‘__var_Type’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:126: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:126: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:126: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:126: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:127: error: ‘__var_Set’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:127: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:127: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:127: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:127: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:128: error: ‘__var_Get’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:128: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:128: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:128: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:128: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:131: error: ‘__var_Command’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:131: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:131: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:131: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:131: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:133: error: expected constructor, destructor, or type conversion before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:171: error: ‘__var_AddCallback’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:171: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:171: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:171: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:171: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:172: error: ‘__var_DelCallback’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:172: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:172: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:172: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:172: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:173: error: ‘__var_TriggerCallback’ has not been declared ../vlc-0.9.10/include/vlc_variables.h:173: error: expected identifier before ‘(’ token ../vlc-0.9.10/include/vlc_variables.h:173: error: expected )' before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:173: error: expected ‘,’ or ‘...’ before ‘*’ token ../vlc-0.9.10/include/vlc_variables.h:173: error: expected constructor, destructor, or type conversion before ‘)’ token ../vlc-0.9.10/include/vlc_variables.h:201: error: ‘__var_SetInteger’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:201: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:201: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:201: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:201: error: expected primary-expression before ‘int’ ../vlc-0.9.10/include/vlc_variables.h:201: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:202: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:215: error: ‘__var_SetBool’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:215: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:215: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:215: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:215: error: expected primary-expression before ‘bool’ ../vlc-0.9.10/include/vlc_variables.h:215: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:216: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:229: error: ‘__var_SetTime’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:229: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:229: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:229: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:229: error: expected primary-expression before ‘i’ ../vlc-0.9.10/include/vlc_variables.h:229: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:230: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:243: error: ‘__var_SetFloat’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:243: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:243: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:243: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:243: error: expected primary-expression before ‘float’ ../vlc-0.9.10/include/vlc_variables.h:243: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:244: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:257: error: ‘__var_SetString’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:257: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:257: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:257: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:257: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:257: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:258: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:270: error: ‘__var_SetVoid’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:270: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:270: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:270: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:270: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:271: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:302: error: ‘__var_GetInteger’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:302: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:302: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:302: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:302: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:303: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:317: error: ‘__var_GetBool’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:317: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:317: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:317: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:317: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:318: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:332: error: ‘__var_GetTime’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:332: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:332: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:332: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:332: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:333: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:347: error: ‘__var_GetFloat’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:347: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:347: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:347: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:347: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:348: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:362: error: ‘__var_GetString’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:362: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:362: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:362: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:362: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:363: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:371: error: ‘__var_GetNonEmptyString’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:371: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:371: error: ‘obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:371: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:371: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:372: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:412: error: variable or field ‘__var_IncInteger’ declared void ../vlc-0.9.10/include/vlc_variables.h:412: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:412: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:412: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:424: error: variable or field ‘__var_DecInteger’ declared void ../vlc-0.9.10/include/vlc_variables.h:424: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:424: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:424: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:437: error: ‘__var_CreateGetInteger’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:437: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:437: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:437: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:437: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:438: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:449: error: ‘__var_CreateGetBool’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:449: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:449: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:449: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:449: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:450: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:461: error: ‘__var_CreateGetTime’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:461: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:461: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:461: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:461: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:462: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:473: error: ‘__var_CreateGetFloat’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:473: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:473: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:473: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:473: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:474: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:485: error: ‘__var_CreateGetString’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:485: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:485: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:486: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:486: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:487: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:492: error: ‘__var_CreateGetNonEmptyString’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:492: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:492: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:493: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:493: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:494: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:527: error: ‘__var_CreateGetIntegerCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:527: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:527: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:527: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:527: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:528: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:540: error: ‘__var_CreateGetBoolCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:540: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:540: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:540: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:540: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:541: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:553: error: ‘__var_CreateGetTimeCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:553: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:553: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:553: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:553: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:554: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:566: error: ‘__var_CreateGetFloatCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:566: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:566: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:566: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:566: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:567: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:579: error: ‘__var_CreateGetStringCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:579: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:579: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:580: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:580: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:581: error: expected ‘,’ or ‘;’ before ‘{’ token ../vlc-0.9.10/include/vlc_variables.h:587: error: ‘__var_CreateGetNonEmptyStringCommand’ declared as an ‘inline’ variable ../vlc-0.9.10/include/vlc_variables.h:587: error: ‘vlc_object_t’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:587: error: ‘p_obj’ was not declared in this scope ../vlc-0.9.10/include/vlc_variables.h:588: error: expected primary-expression before ‘const’ ../vlc-0.9.10/include/vlc_variables.h:588: error: initializer expression list treated as compound expression ../vlc-0.9.10/include/vlc_variables.h:589: error: expected ‘,’ or ‘;’ before ‘{’ token src/transcribeWidget.cpp:859: warning: unused parameter ‘bytesSent’ src/transcribeWidget.cpp:859: warning: unused parameter ‘bytesTotal’ ../vlc-0.9.10/include/vlc_variables.h:201: warning: ‘__var_SetInteger’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:215: warning: ‘__var_SetBool’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:229: warning: ‘__var_SetTime’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:243: warning: ‘__var_SetFloat’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:257: warning: ‘__var_SetString’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:270: warning: ‘__var_SetVoid’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:302: warning: ‘__var_GetInteger’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:317: warning: ‘__var_GetBool’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:332: warning: ‘__var_GetTime’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:347: warning: ‘__var_GetFloat’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:362: warning: ‘__var_GetString’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:371: warning: ‘__var_GetNonEmptyString’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:437: warning: ‘__var_CreateGetInteger’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:449: warning: ‘__var_CreateGetBool’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:461: warning: ‘__var_CreateGetTime’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:473: warning: ‘__var_CreateGetFloat’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:485: warning: ‘__var_CreateGetString’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:492: warning: ‘__var_CreateGetNonEmptyString’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:527: warning: ‘__var_CreateGetIntegerCommand’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:540: warning: ‘__var_CreateGetBoolCommand’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:553: warning: ‘__var_CreateGetTimeCommand’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:566: warning: ‘__var_CreateGetFloatCommand’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:579: warning: ‘__var_CreateGetStringCommand’ defined but not used ../vlc-0.9.10/include/vlc_variables.h:587: warning: ‘__var_CreateGetNonEmptyStringCommand’ defined but not used

  Read the article

• css, unordered list not displaying icon in right place...

  - by Ronedog

  I'm really frustrated with this one. A few weeks ago I got it working in both firefox and ie just fine. Went back today to do some testing and found a problem with the display in firefox and I've been searching the code but can't find anything. I could use a few tips from anyone willing, I'm sure I'm looking at the wrong things. I upgraded my firefox version but I imagine my code is broke, not firefox. I'm assuming the problem is somewhere in my css file, but I'm not sure. Here's what I've confirmed so far. There don't seem to be conflicts in other css files with < ul 's or < li 's that may be overriding settings. The other confirmation is that This works fine in Internet Explorer...therefore I must be an idiot, because its usually been the other way around (working in FF, but failing in IE). Here's How it looks in IE (Notice the position of the folder icon right next to the text): Here's how it looks in FF (Notice the folder icon is not being pushed down with its corresponding text). Here's the Unordered List: <ul id="nav"> <li><a>Utah</a></li> <ul> <li><a>ParkCity</a> <ul> <li><a>Com1</a></li> <ul> <li class="folder_closed"><a>Timber</a></li> <div>SQUARE CONTAINER IS INSIDE THIS DIV</div> </ul> </ul> </ul> </ul> Here's the CSS that is used for the whole menu: /* MENU NAVIGATION (<UL><LI> LISTS ****************************************/ ul#nav{ /* This handles the main root <ul> */ margin-left:0; margin-right:0; padding-left:0px; text-indent:15px; } ul#nav div{ overflow: hidden; } #nav li>a:hover { cursor: pointer; } #nav li > ul{ /* This will hide any element with an id of "nav" and an "li" that has a direct child that is a "ul" */ display:none; margin-left:0px; margin-right:0px; padding-left:15px; padding-right:0px; text-indent:15px; } #nav li { list-style-type:none; list-style-image: none; } #nav > li{ vertical-align: top; left:0px; text-align:left; clear: both; margin:0px; margin-right:0px; padding-right:0px; } .menu_parent{ background-image: url(../images/maximize.png); background-repeat: no-repeat; background-position: 0px 1px; position:relative; } .menu_parent_minimized{ background-image: url(../images/minimize.png); background-repeat: no-repeat; background-position: 0px 1px; position:relative; } .folder_closed{ position:relative; background-image: url(../images/folder_closed12x14.png); background-repeat: no-repeat; background-position: 0px -2px; } .folder_open{ position:relative; background-image: url(../images/folder_open12x14.png); background-repeat: no-repeat; background-position: 0px -2px; } </ul>

  Read the article

• How can i return abstract class from any factory?

  - by programmerist

  using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace EfTestFactory { public abstract class _Company { public abstract List<Personel> GetPersonel(); public abstract List<Prim> GetPrim(); public abstract List<Finans> GetFinans(); } public abstract class _Radyoloji { public abstract List<string> GetRadyoloji(); } public abstract class _Satis { public abstract List<string> GetSatis(); } public abstract class _Muayene { public abstract List<string> GetMuayene(); } public class Company : _Company { public override List<Personel> GetPersonel() { throw new NotImplementedException(); } public override List<Prim> GetPrim() { throw new NotImplementedException(); } public override List<Finans> GetFinans() { throw new NotImplementedException(); } } public class Radyoloji : _Radyoloji { public override List<string> GetRadyoloji() { throw new NotImplementedException(); } } public class Satis : _Satis { public override List<string> GetSatis() { throw new NotImplementedException(); } } public class Muayene : _Muayene { public override List<string> GetMuayene() { throw new NotImplementedException(); } } public class GenoTipController { public object CreateByEnum(DataModelType modeltype) { string enumText = modeltype.ToString(); // will return for example "Company" Type classType = Type.GetType(enumText); // the Type for Company class object t = Activator.CreateInstance(classType); // create an instance of Company class return t; } } public class AntsController { static Dictionary<DataModelType, Func<object>> s_creators = new Dictionary<DataModelType, Func<object>>() { { DataModelType.Radyoloji, () => new _Radyoloji() }, { DataModelType.Company, () => new _Company() }, { DataModelType.Muayene, () => new _Muayene() }, { DataModelType.Satis, () => new _Satis() }, }; public object CreateByEnum(DataModelType modeltype) { return s_creators[modeltype](); } } public class CompanyView { public static List<Personel> GetPersonel() { GenoTipController controller = new GenoTipController(); _Company company = controller.CreateByEnum(DataModelType.Company) as _Company; return company.GetPersonel(); } } public enum DataModelType { Radyoloji, Satis, Muayene, Company } } if i write above codes i see some error: Cannot create an instance of abstract class or interface 'EfTestFactory_Company'How can i solve it? Look please below pic.

  Read the article

• Add elements to Arraylist and it replaces all previous elements in Java

  - by pie154

  I am adding elements to a ArrayList and it adds the first one correctly but then when I add any subsequent elements it wipes replaces the other elements with the value form the most recently added and adds a new element to the ArrayList. I ran test using arraylist and ints and even another created class and it worked perfectly but soemthing about the custon class i am using here causes problems. The code for the array list is public static void main(String args[]){ List<BasicEvent> list = new ArrayList<BasicEvent>(); list.add(new BasicEvent("Basic", "Door", 9, 4444, new Date(12,04,2010), new Time(12,04,21), 1, 0.98, 0)); list.add(new BasicEvent("Composite", "Door", 125, 4444, new Date(12,04,2010), new Time(12,04,20), 1, 0.98, 1)); list.add(new BasicEvent("Basic", "Door", 105, 88, new Date(12,04,2010), new Time(12,05,23), 1, 0.98, 0)); list.add(new BasicEvent("Basic", "Door", 125, 12, new Date(12,04,2010), new Time(12,05,28), 1, 0.98, 1)); list.add(new BasicEvent("Basic", "Door", 129, 25, new Date(12,04,2010), new Time(12,05,30), 1, 0.98, 0)); list.add(new BasicEvent("Basic", "Door", 125, 63, new Date(12,04,2010), new Time(12,04,20), 1, 0.98, 1)); list.add(new BasicEvent("Basic", "Detect", 127, 9, new Date(12,04,2010), new Time(12,05,29), 1, 0.98, -1)); for(int i=0;i<list.size();i++) {System.out.println("list a poition " + i + " is " + BasicEvent.basicToString(list.get(i)));} And the code for the custom class basicEvent is public class BasicEvent { public static String Level; public static String EType; public static double xPos; public static double yPos; public static Date date; public static Time time; public static double Rlb; public static double Sig; public static int Reserved; public BasicEvent(String L, String E, double X, double Y, Date D, Time T, double R, double S, int Res){ Level = L; EType = E; xPos = X; yPos = Y; date = D; time = T; Rlb = R; Sig = S; Reserved = Res; }; public static String basicToString(BasicEvent bse){ String out = bse.getLevel() + ";" + bse.getEtype() + ";" + bse.getxPos() + ";" + bse.getyPos() + ";" + bse.getDate().dateAsString() + ";" + bse.getTime().timeAsString() + ";" + bse.getRlb() + ";" + bse.getSig() + ";" + bse.getReserved(); return out; }

  Read the article

• subclassing QList and operator+ overloading

  - by Milen

  I would like to be able to add two QList objects. For example: QList<int> b; b.append(10); b.append(20); b.append(30); QList<int> c; c.append(1); c.append(2); c.append(3); QList<int> d; d = b + c; For this reason, I decided to subclass the QList and to overload the operator+. Here is my code: class List : public QList<int> { public: List() : QList<int>() {} // Add QList + QList friend List operator+(const List& a1, const List& a2); }; List operator+(const List& a1, const List& a2) { List myList; myList.append(a1[0] + a2[0]); myList.append(a1[1] + a2[1]); myList.append(a1[2] + a2[2]); return myList; } int main(int argc, char *argv[]) { QCoreApplication a(argc, argv); List b; b.append(10); b.append(20); b.append(30); List c; c.append(1); c.append(2); c.append(3); List d; d = b + c; List::iterator i; for(i = d.begin(); i != d.end(); ++i) qDebug() << *i; return a.exec(); } , the result is correct but I am not sure whether this is a good approach. I would like to ask whether there is better solution?

  Read the article

• How to Create Auto Playlists in Windows Media Player 12

  - by DigitalGeekery

  Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune.   We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list.   This will pull up a filter window with all the criteria. Select a filter and then click OK when finished.   From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list.   Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK.   Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane.   Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

  Read the article

• Aggregate SharePoint Event/Items into your Calendar view using Calendar Overlay

  - by eJugnoo

  One of the most common features I have seen in common use for SharePoint (prior to 2010) in Intranet environments for Team site is Calendar’s. Not only the Calendar list type, but also the ability to add a Calendar view to any list that has the desired columns to construct a Calendar – such as Start, End, Title etc. While this was all great for a single site/calendar, the problem of having to track numerous calendar’s remained. With introduction of Outlook 2007 bi-directional integration with SharePoint, and particularly the ability of Outlook to overlay calendar helped bridge the gap. Now one could connect to number of team sites, and setup Calendar overlays in Outlook using varying colours, to easily identify event source and yet benefit from the plotting of events on single Calendar view. This was all good, but each user in your Enterprise was supposed to setup in a “pull” fashion. This is good for flexibility, not so good when you need to “push” consistency and productivity (re-use). So, what was missing on SharePoint is the ability to have server-side overlay’s that everyone can see – in a single place, aggregating multiple sources. Until SharePoint 2010 arrived! Calendars Overlay in SharePoint 2010 There are Calendar lists and Calendar views. View can be created for almost all lists, as far as you have desired column’s in a list like Start, End, Title etc. to be able to describe and plot an item in a Calendar format. In SharePoint 2010, create a new Calendar list. Go to Calendar ribbon tab, and click Calendar Overlay. You get the screen with list of existing Overlay’s associated with current Calendar (list – in our case). Click on “New Calendar”… Notice the breadcrumb! You are adding Overlay to existing list (Team Calendar – in our case). You have choice of “pulling” Calendar info from an existing Calendar (list/view) in SharePoint or even from Exchange! Set standard info like a name, description and decide the colour you want for the items in aggregated Calendar overlay. Select the source site/list/view, anywhere in farm. When you select Exchange as source of Calendar, you get option to add OWA and Exchange Web Service url. I will cover details of connecting with Exchange in another post, and focus on Overlay’s with SharePoint for this one. Once you have added a new Calendar overlay to existing Calendar veiw, you get something like below for Day view, Week view, and Month view respectively Notice the Overlay colours: Now, if you decide to connect this Calendar to Outlook to sync the items, it will only sync items from main view, and not from Overlay source. So such Overlay of calendar’s is server-side aggregation only. That increases my curiosity, so I try adding the Calendar list view as a web-part on a new page. As you see, this instance of view didn’t include item from source that we had added to default Calendar view. This is – probably – due to the fact that this is a new web-part view for the page. If you want to add overlay to this one, you have to redo that from Ribbon. This also means, subject to purpose and context you get the flexibility to decide what overlay is suited. Also you can only add 10 Overlay’s to an existing view instance. Conclusion Calendar Overlay is clearly a very useful feature that fills a gap of not being able to aggregate information from multiple sources into a Calendar view within context of current items. Source of items can be existing SharePoint calendar views on any site, or even Exchange (via OWA/Exchange web services). List type for source doesn’t matter, it just need a Calendar view type available. You can have 10 overlays. Overlays are for the specific view only, and are server-side only – which means they do not get synced in Outlook. While you can drag-drop current list items, you cannot edit overlay items as they are read-only within scope of current Calendar view. You can of course click on source Overlay item to edit at the source. I’d like to hear, how you think Overlay’s will help you in your case, or how you are already using them... Enjoy SharePoint! --Sharad

  Read the article

• Dynamic Paging and Sorting

  - by Ricardo Peres

  Since .NET 3.5 brought us LINQ and expressions, I became a great fan of these technologies. There are times, however, when strong typing cannot be used - for example, when you are developing an ObjectDataSource and you need to do paging having just a column name, a page index and a page size, so I set out to fix this. Yes, I know about Dynamic LINQ, and even talked on it previously, but there's no need to add this extra assembly. So, without further delay, here's the code, in both generic and non-generic versions: public static IList ApplyPagingAndSorting(IEnumerable enumerable, Type elementType, Int32 pageSize, Int32 pageIndex, params String [] orderByColumns) { MethodInfo asQueryableMethod = typeof(Queryable).GetMethods(BindingFlags.Static | BindingFlags.Public).Where(m = (m.Name == "AsQueryable") && (m.ContainsGenericParameters == false)).Single(); IQueryable query = (enumerable is IQueryable) ? (enumerable as IQueryable) : asQueryableMethod.Invoke(null, new Object [] { enumerable }) as IQueryable; if ((orderByColumns != null) && (orderByColumns.Length 0)) { PropertyInfo orderByProperty = elementType.GetProperty(orderByColumns [ 0 ]); MemberExpression member = Expression.MakeMemberAccess(Expression.Parameter(elementType, "n"), orderByProperty); LambdaExpression orderBy = Expression.Lambda(member, member.Expression as ParameterExpression); MethodInfo orderByMethod = typeof(Queryable).GetMethods(BindingFlags.Public | BindingFlags.Static).Where(m = m.Name == "OrderBy").ToArray() [ 0 ].MakeGenericMethod(elementType, orderByProperty.PropertyType); query = orderByMethod.Invoke(null, new Object [] { query, orderBy }) as IQueryable; if (orderByColumns.Length 1) { MethodInfo thenByMethod = typeof(Queryable).GetMethods(BindingFlags.Public | BindingFlags.Static).Where(m = m.Name == "ThenBy").ToArray() [ 0 ].MakeGenericMethod(elementType, orderByProperty.PropertyType); PropertyInfo thenByProperty = null; MemberExpression thenByMember = null; LambdaExpression thenBy = null; for (Int32 i = 1; i 0) { MethodInfo takeMethod = typeof(Queryable).GetMethod("Take", BindingFlags.Public | BindingFlags.Static).MakeGenericMethod(elementType); MethodInfo skipMethod = typeof(Queryable).GetMethod("Skip", BindingFlags.Public | BindingFlags.Static).MakeGenericMethod(elementType); query = skipMethod.Invoke(null, new Object [] { query, pageSize * pageIndex }) as IQueryable; query = takeMethod.Invoke(null, new Object [] { query, pageSize }) as IQueryable; } MethodInfo toListMethod = typeof(Enumerable).GetMethod("ToList", BindingFlags.Static | BindingFlags.Public).MakeGenericMethod(elementType); IList list = toListMethod.Invoke(null, new Object [] { query }) as IList; return (list); } public static List ApplyPagingAndSorting(IEnumerable enumerable, Int32 pageSize, Int32 pageIndex, params String [] orderByColumns) { return (ApplyPagingAndSorting(enumerable, typeof(T), pageSize, pageIndex, orderByColumns) as List); } List list = new List { new DateTime(2010, 1, 1), new DateTime(1999, 1, 12), new DateTime(1900, 10, 10), new DateTime(1900, 2, 20), new DateTime(2012, 5, 5), new DateTime(2012, 1, 20) }; List sortedList = ApplyPagingAndSorting(list, 3, 0, "Year", "Month", "Day"); SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

  Read the article

• The Top Ten Security Top Ten Lists

  - by Troy Kitch

  As a marketer, we're always putting together the top 3, or 5 best, or an assortment of top ten lists. So instead of going that route, I've put together my top ten security top ten lists. These are not only for security practitioners, but also for the average Joe/Jane; because who isn't concerned about security these days? Now, there might not be ten for each one of these lists, but the title works best that way. Starting with my number ten (in no particular order): 10. Top 10 Most Influential Security-Related Movies Amrit Williams pulls together a great collection of security-related movies. He asks for comments on which one made you want to get into the business. I would have to say that my most influential movie(s), that made me want to get into the business of "stopping the bad guys" would have to be the James Bond series. I grew up on James Bond movies: thwarting the bad guy and saving the world. I recall being both ecstatic and worried when Silicon Valley-themed "A View to A Kill" hit theaters: "An investigation of a horse-racing scam leads 007 to a mad industrialist who plans to create a worldwide microchip monopoly by destroying California's Silicon Valley." Yikes! 9. Top Ten Security Careers From movies that got you into the career, here’s a top 10 list of security-related careers. It starts with number then, Information Security Analyst and ends with number one, Malware Analyst. They point out the significant growth in security careers and indicate that "according to the Bureau of Labor Statistics, the field is expected to experience growth rates of 22% between 2010-2020. If you are interested in getting into the field, Oracle has many great opportunities all around the world.  8. Top 125 Network Security Tools A bit outside of the range of 10, the top 125 Network Security Tools is an important list because it includes a prioritized list of key security tools practitioners are using in the hacking community, regardless of whether they are vendor supplied or open source. The exhaustive list provides ratings, reviews, searching, and sorting. 7. Top 10 Security Practices I have to give a shout out to my alma mater, Cal Poly, SLO: Go Mustangs! They have compiled their list of top 10 practices for students and faculty to follow. Educational institutions are a common target of web based attacks and miscellaneous errors according to the 2014 Verizon Data Breach Investigations Report.    6. (ISC)2 Top 10 Safe and Secure Online Tips for Parents This list is arguably the most important list on my list. The tips were "gathered from (ISC)2 member volunteers who participate in the organization’s Safe and Secure Online program, a worldwide initiative that brings top cyber security experts into schools to teach children ages 11-14 how to protect themselves in a cyber-connected world…If you are a parent, educator or organization that would like the Safe and Secure Online presentation delivered at your local school, or would like more information about the program, please visit here.” 5. Top Ten Data Breaches of the Past 12 Months This type of list is always changing, so it's nice to have a current one here from Techrader.com. They've compiled and commented on the top breaches. It is likely that most readers here were effected in some way or another. 4. Top Ten Security Comic Books Although mostly physical security controls, I threw this one in for fun. My vote for #1 (not on the list) would be Professor X. The guy can breach confidentiality, integrity, and availability just by messing with your thoughts. 3. The IOUG Data Security Survey's Top 10+ Threats to Organizations The Independent Oracle Users Group annual survey on enterprise data security, Leaders Vs. Laggards, highlights what Oracle Database users deem as the top 12 threats to their organization. You can find a nice graph on page 9; Figure 7: Greatest Threats to Data Security. 2. The Ten Most Common Database Security Vulnerabilities Though I don't necessarily agree with all of the vulnerabilities in this order...I like a list that focuses on where two-thirds of your sensitive and regulated data resides (Source: IDC).  1. OWASP Top Ten Project The Online Web Application Security Project puts together their annual list of the 10 most critical web application security risks that organizations should be including in their overall security, business risk and compliance plans. In particular, SQL injection risks continues to rear its ugly head each year. Oracle Audit Vault and Database Firewall can help prevent SQL injection attacks and monitor database and system activity as a detective security control. Did I miss any?

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >