Search Results

Search found 11759 results on 471 pages for 'isolation level'.

Page 230/471 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Mac ASL: Unable to see my application's log messages

  - by trojanfoe

  I have just added ASL logging support to my application but I cannot see any log entries using Console.app. I am logging with facility 'com.mydomain.myapp' (that's not the actual value) and have even added an entry to /private/etc/asl.conf to tell syslogd to 'store' entries at this Facility (with any Level): ? [= Facility com.mydomain.myapp] store I HUP'd syslogd with no success so I restarted my MacBook Pro, which also made no difference. I know my application is logging OK as I have added the option ASL_OPT_STDERR when calling asl_open() and can see the entries on stderr. Any help would be must appreciated!

  Read the article

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• Word 2007 Smart Arts - how deep can I go?

  - by Franz

  In Office Word 2007, I want to use a Smart Art to create a hierarchical diagram for an organization. I want to use the one called "simple radial" (at least that's my word-to-word translation from German - it's the one with the circle in the middle and other circles around it, attached by lines). However, it seems to only support one level of depth (at least for circles). Everything else just becomes a bulleted list inside of the circle. Is there any way to accomplish this in Word 2007? Else: are there any other free tools to do this? I also want to add some other shapes. Again: I want to accomplish a star-like structure with a total of 4 depth levels. Thanks for your responses in advance!

  Read the article

• Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

  - by Don MacAskill

  On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• XKB - remap arrow keys and preserve shift behaviour to select text

  - by dgirardi

  I realize arrow key remapping is an old problem, however I cannot seem to find a good solution that lets me select text with SHIFT + remapped keys as I would do with the vanilla arrow keys. For instance, if I remap Caps Lock to ISO_Level3_Shift and set xkb_symbols to read either key <AC08> { [ k, K , Down, Down] }; or key <AC08> { type="THREE_LEVEL", [ k, K , Down ] }; Pressing Shift+CapsLock+K will behave exactly as CapsLock+K (while Shift+Down behaves differently from Down alone). I had somewhat more success using higher level macro utilities and generating keyboard events (i.e. generate both the shift and the arrow keypresses); hoever that approach has a whole set of different problems - often the UI response to a simulated keypress is different from the "real" keypress, and there are performance problems as well - I can type faster than the thing can handle. Tl;dr; how can you shift-select using remapped arrow keys under X?

  Read the article

• Does WD Drive Lock encrypt the data?

  - by ssg

  I wonder if WD Drive Lock ineed encrypts the data on a Western Digital My Book Essential device or just puts a firmware-level password on the device. If it's just a password the data surely could be retrieved by a third party. I could not find anything on about that on user manuals. I found a blog saying "data is secured with AES256" bla bla but that doesn't say anything about if the password could be compromised or not. Because I don't see any delays when I add/remove the password. On the other hand when I enable BitLocker, it takes hours before it encrypts everything with my password.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Checking for orphaned snapshots - ESXi5

  - by Tim Alexander

  So we had some issues with our passive mail node over the weekend doing vmtools updates and to resolve a problem we had to revert to a snapshot and then reseed all the databases across. All in all everything seemed fine, the server works and CCR copy status is running fine. I used the "Delete All" option this morning to remove the snapshot and the process according to vCenter has completed with no errors and no "Needs Consolidation" flag. This all seems fine until I check the Datastore that holds the VM on our SAN and I can clearly see snapshots that are pretty big [see attached image]. These do not seem to be changing size and the data modified is around the time the works were started for the vmtools update. Does this possibly mean that at some stage, possibly during reversion or hard resetting of the VM, that they have become orphaned? Are there any methods to check orphaned status of snapshots? We are running ESXi5.0 Update 1 with storage provide by an EMC SAN. Enterprise plus is the license level.

  Read the article

• How hard for a Software Developer to Maintain a Server

  - by Samy

  I'm a software developer and don't have much experience as a sysadmin. I developed a web app and was considering buying a server and hosting the web app on it. Is this a huge undertaking for a web developer? What's the level of difficulty of maintaining a server and keeping up with the latest security patches and all that kind of fun stuff. I'm a single user, and not planning to sell the service to others. Can someone also recommend an OS for my case, and maybe some good learning resources that's concise and not too overwhelming.

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• Active Directory Problem

  - by Ankur Dholakiya

  Hello All, I have one server 2008 installed with AD, SQL and IIS. Now I am trying to attach different HDD on this server only. I am able to install windows server 2008 r2 64bit on the server, but when I try to install the ActiveDirectory on the server the setup doesn't get completed and keep processing at following level. "Configuring Active directory and local host domains ......." If I attach same HDD on any other PC Active directory setups completes successfully. My server is Xeon quad core with 8GB of RAM. Can any one help the appropriate solution for this?

  Read the article

• Public Facing Recursive DNS Servers - iptables rules

  - by David Schwartz

  We run public-facing recursive DNS servers on Linux machines. We've been used for DNS amplification attacks. Are there any recommended iptables rules that would help mitigate these attacks? The obvious solution is just to limit outbound DNS packets to a certain traffic level. But I was hoping to find something a little bit more clever so that an attack just blocks off traffic to the victim IP address. I've searched for advice and suggestions, but they all seem to be "don't run public-facing recursive name servers". Unfortunately, we are backed into a situation where things that are not easy to change will break if we don't do so, and this is due to decisions made more than a decade ago before these attacks were an issue.

  Read the article

• Is there a media/music player program that has a "biased" shuffle?

  - by Joel Coehoorn

  I know in iTunes and a few other apps you can get playlists for just "highly rated" songs, but that's not quite what I want. I want to hear the lower-rated stuff, too. If I didn't like the song at some level it wouldn't be in my library in the first place, and so even a one-star song is worth the occasional listen. However, I do want to hear five-star songs a lot more often than one-star songs, even though I think I have a lot more one-star songs in my music library. So does anyone know of media player software of plugin (preferrable free) that has a shuffle mode that is biased towards songs that are rated higher, without completely excluding those that are rated lower? Right now I prefer windows media player, so a plugin for that would be ideal, but I'm not married to media player, either. Any music software that will do this would be worth some attention.

  Read the article

• How to plot survey results on Excel?

  - by Mulone

  Hi all, I would like to plot the average of these data sample: 1. Contribution to the project 2. Affiliation with project owners 3. Level of expertise 4. Learning Curve Yes No 3 2 No No 3 2 No No 4 3 No No 5 3 No No 3 3 Yes Yes 5 4 No No 4 3 No No 3 2 No Yes 2 4 No No 5 2 No Yes 5 No answer No No 2 2 No No 3 3 ... Basically I know how to do the average of each numeric column, but I have a few questions for you: If the column contains non numeric values (e.g. "no answer") the average doesn't work. Is there a workaround for this? How can I count the yes/no results and plot only a percentage? Thanks for any hints! Mulone

  Read the article

• Cannont add service account to domain group during sql cluster install

  - by Sam

  I'm installing a 2008 instance on a 2003 machine which is already running 2005. I need to set up domain groups for the security setup step: http://msdn.microsoft.com/en-us/library/ms179530.aspx On Windows Server 2003, specify domain groups for SQL Server services. All resource permissions are controlled by domain-level groups that include SQL Server service accounts as group members. Much more info on this here: http://support.microsoft.com/kb/910708 I've had problems with being able to add the windows service accounts to the groups at install time. The security admins had to make my account a domain admin - which they were hesitant to do. The account under which SQL Server Setup is running must have permissions to add accounts to the domain groups. Is there a specific security setting which would allow my account to add accounts to a group?

  Read the article

• Which is generally considered faster or best practice: symlinks or Apache aliases?

  - by Christopher W. Allen-Poole

  I'm curious as to what most people's views are on this subject. Personally, I will almost always prefer symlinks unless I have no other option -- I find that it is far more obvious when someone is navigating the file system, but, on the other hand aliasing is more platform independent. Windows XP, for example, doesn't have anything remotely comparable to symlinks (NTFS junctions are not interpreted correctly by at least some environments), which means that anything which relies on symlinks in a *nix based system cannot be transferred. (I know that Windows 64x OS's have symlinks, but I've not seen if they can be read correctly by the environments previously mentioned) In addition to this, I was also wondering which is considered faster. Is this even possible to know? Do you have a conjecture? I would imagine that since symlinks are generally more low-level than Apache it would make sense that they would be referenced faster, but, on the other hand, I would guess that Apache is required to do a lookup in either case so it would be disk read dependent.

  Read the article

• Immediate Propagation in Active Directory

  - by squillman

  It's been a while since I've done any large-scale AD administration so I'm reaching back a bit here. I remember that there are certain security related attributes on a user account object that, due to their nature, are flagged for immediate propagation to other sites. I have a case where passwords resets are not being propagated until scheduled replication happens. I had thought that was a case of immediate propagation. Am I just remembering incorrectly? Domain function level is 2003.

  Read the article

• Win2008 DC in a Windows 2000 domain: can I keep the old DC?

  - by gravyface

  Will be putting a new Windows 2008 SE Server into a single domain network with two domain controllers, both running Windows 2000 Server. The functional level of the domain is mixed mode/2000. Until a second 2008 DC can be purchased, I'd like to leave the current Win2k operational master DC as a backup DC as the other member servers running 2003 have either accounting/SQL or Exchange on them. Eventually all the w2k servers will be decommissioned, but until then, I need another DC for redundancy. Following the standard process for adding a new DC, can I leave the old operational master DC (or the other backup DC) running after I transfer the FSMO roles to the new server? Will this cause any issues?

  Read the article

• How can Firefox masquerade as Chrome?

  - by Christos Jonathan Hayward

  I have access to Firefox but not Chrome under XP. I would like extensions to make it more Chrome-like: in particular, 1: A tabbed theme that works like Chrome. 2: One address/search bar that will go to URLs and submit search queries appropriately. (I have already installed "Download Statusbar.") I am looking on a relatively superficial level; I'm not hoping to simulate V8 or Chrome's screaming render times. But I would like a setup that minimally breaks the illusion for someone accustomed to Chrome.

  Read the article

• sound volume increase beyond 100% whenever possible on linux

  - by fakedrake

  Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you Note: Asked the same thing on stackoverflow and they directed me here.

  Read the article

• Watch videos from a remote computer on the LAN on ubuntu

  - by tapan

  I want to watch the videos on a friends computer on the LAN without having to download it. Both of us are running ubuntu. Now one way is to ssh to his computer, cd to the directory where the video is and run the falling command: cat video.avi | ssh me@mycomputer mplayer - This works. However the problem is that I cannot seek inside the video as in can't go forward or backward in it. Is there a method by which I can watch the videos and also seek in them ? I can install any software on his comp and my comp to aid this process. I have root level access on both computers. Any suggestions ?

  Read the article

• Netboot Intel Macs without BSDP

  - by notpeter

  I have a netboot setup with DeployStudio that works great in my lab, but doesn't work on our main network. After some digging, I believe it's because our network admins are filtering BSDP (Boot Service Discovery Protocol) on our subnet at the switch level. Is it possible to hard code which server my clients (early 2007 iMac Core2Duos) should boot from without relying on BSDP? Perhaps relevant details: I do not have control over switch configs or DHCP settings. Client and server are running 10.6 Snow Leopard. The clients see the netboot server advertising itself in the 'Startup Disk' system preferences pane, but when I go to netboot it just leaves me with a flashing globe.

  Read the article

• Encrypt connection between apache web server and mysql server.

  - by microchasm

  I'm setting up a local webapp. I have a CentOS-5 box that will be the webserver (Apache 2.2). I have another box (RHEL5) that will be used only for MySQL. The data will be encrypted on the webserver via PHP before being sent to the MySQL box and inserted into the db. All web-based connections to the webserver will be encrypted via SSL. From the research I've done, it's not totally clear on whether or not there is a need to encrypt the connection to the db from webserver (NB paranoia level: Orange). If it is not overkill, or even if it is (unless it is a really bad idea for some reason), any advice or pointers on the direction to take to get this done would be appreciated.

  Read the article

• Startup script on Ubuntu 12.04 not getting executed. Dependencies / load order.

  - by user861181

  I want to create a simple startup script on Ubuntu 12.04: myscript.sh #!/bin/sh sudo /etc/init.d/nginx start cd ~/app/current god -c config/resque.god sudo /etc/init.d/redis-server start echo "SCRIPT RUN" I have it at /etc/init.d/myscript.sh When I do sudo chkconfig --level 2345 myscript.sh I get myscript.sh 2345 When I do sudo chkconfig --add myscript.sh I get insserv: warning: script 'K01myscript.sh' missing LSB tags and overrides insserv: warning: script 'myscript.sh' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'dbus' missing LSB tags and overrides .... myscript.sh 0:off 1:off 2:on 3:on 4:on 5:on 6:off ** EDIT:: I checked the boot.log and it turns out that the script is run, but the problem is that god is not loaded yet when the script is executed. Apparently I want to load this script as the very last thing at startup (or somehow check if god is loaded and then start the script).

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >