Search Results

Search found 102001 results on 4081 pages for 'windows error reporting'.

Page 233/4081 | < Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >

  • Netbook without Windows?

    - by drewk
    I have been looking around for a netbook without Windows and with Ubuntu preinstalled. Almost all I have seen have Windows. The main issue is making sure that the computer ships with the right Ubuntu drivers and, hopefully, saving a little without having to pay for Windows. So far, I cannot find one.

    Read the article

  • Set up ad hoc wireless connection between Windows Vista and Mac OS X

    - by Skarab
    I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

    Read the article

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • Compatability error Installing Sharepoint w/ SP1 on Windows 2008 R2 RC

    - by Vaccano
    I am trying to install sharepoint 2007 enterprise with SP1 on Windows Server 2008 R2 RC 64 bit. I am getting a compatibility error. Here is the text: [Window Title] Program Compatibility Assistant [Main Instruction] This program is blocked due to compatibility issues [Expanded Information] You must install Office SharePoint Server 2007 - Please read Microsoft Knowledge Base article: 962935 with the most recent service pack. Office SharePoint Server 2007 - Please read Microsoft Knowledge Base article: 962935 without service packs has a known compatibility issue with this version of Windows. I can't find this KB article. I have the most recent SP installer available with my MSDN subscription. Any ideas?

    Read the article

  • Mac - Windows VPN

    - by user61652
    Hi, I am trying to setup a secure vpn server (Ipsec l2tp) on windows so I can connect to it using my mobile mac or any other windows pc. It seems it is quite a hassle to do this. Does anyone have any good suggestions, maybe a software or open source. Note that I have not yet encountered a piece of ware that can run on both windows and mac. I would ideally prefer a single UI rather than learn two. BR

    Read the article

  • Get exact size in bytes of a disk & partitions in windows

    - by Antonius Bloch
    Hi, I'm using dd (under cygwin) to copy a shadow image of a disk in windows. Shadow copy will only give me a partion, so what I am doing is: 1) using dd to grab the disk header (32k on Win2003) 2) using dd to copy the shadow partition 3) using dd to copy the end of of the disk (8 meg reserved on Win2003) 4) stitch them all together and boot on KVM I need the exact size of all the partitions and non partitioned space on this windows drive. Unfortunately most windows disk tools seem to fudge the numbers a bit, or at least give me a different size than Linux does. I could guess like this 32k + partition size + 8M, but I want to double check. If I make a mistake I could lose data. This is on a remote & live Windows 2003 server so no offline solutions will be helpful. Latest cygwin is installed.

    Read the article

  • Group Policy Software Installs Too Silent on Windows 7

    - by jonblock
    I'm trying to migrate a Windows XP deployment process to Windows 7. The process has been surprisingly smooth, after figuring out how to bring up a base system. We rely heavily on Group Policy software installation, which in XP can mean long periods on any given morning sitting around watching the machine install new updates. At least the typical Windows Installer message shows the user that something is indeed happening. As far as I can tell, Windows 7 retains the startup installation process (good), but eliminates the on-screen message to indicate what's happening (bad). All a user will see, possibly for a half-hour or more if they haven't restarted for a while, is the electric hamster wheel and the words "Please wait...". I forsee a significant increase in support calls... If you're familiar with msiexec.exe parameters, XP behaves like /qb-, and 7 behaves like /qn. I want the /qb- behavior back. Is there a way to re-enable the Windows Installer notices for Group Policy startup installations?

    Read the article

  • Upgrading Windows 8 Consumer Preview to Release Preview

    - by user1407016
    I currently have my main hard drive split into two partitions. One being Windows 7 with about 600 GB of memory, the other Windows 8 Consumer Preview with about 50 GB. As you can guess it is set up for a dual boot. Today while looking up how to get the C# Facebook SDK for Metro apps I learned about the Release Preview being released. I was wondering: How do I go about getting rid of Windows 8 Consumer Preview and replacing it with the Release Preview? I know i can't just wipe it off my second partition because the dual boot uses Windows 8 to choose the operating system to boot.

    Read the article

  • It takes a long time until Windows XP recognize I connected USB drive

    - by Pavol G
    I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

    Read the article

  • Need help solving "Disk Error Press any key to restart" after blue screen in XP.

    - by Dennis
    I have had a couple of BSOD's lately and after the last one I got the disk error message. The disk shows up during the BIOS portion of the boot. It is in a Dell Precision 690 so the F12 key gives me a boot menu. I can boot from the utility partition, and if I specifically select the hard drive from the boot menu it will boot fine. Any ideas why if I just try to do an unattended boot, it give the error listed in the title?

    Read the article

  • Windows 7 Media Center suddenly Jerky..

    - by Kris Erickson
    Media Center in Windows 7 has been running great for me for the past few months since I switched to Windows 7. I can watch HD content on my Xbox, and I have had very few issues with it (occasionally it has locked up on the Xbox, but restarting the Xbox usually fixes that). All of a sudden it has gotten jerky, SD content playing on my computer (not even streaming to the Xbox) is Jerky. VLC and Windows Media Player play the same content perfectly, it is just when it is playing in Windows Media Center (whether streaming or not). Any ideas what could be the cause of this? And yes I have reboot several times...

    Read the article

  • USB Flash not recognised by Windows and BIOS, but works fine in Linux

    - by bbalegere
    I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

    Read the article

  • Cannot get Windows snipping tool to auto run with AutoHotKey

    - by jasondavis
    I am trying to get Windows 7 sniping tool to run when I hit my PRINTSCREEN keyboard button with AUTOHOTKEY. I have been unsuccessful so far though. Here is what I have for the AutoHotKey script. I have tried this PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool And all those give me this error when I hit the PRINTSCREEN button... It basicly says it cannot find the file, however the file path seems to be correct, I can copy paste it into a window and it opens the snipping tool, any ideas why it will not work? Here is the full code to my AHK file... ; ; AutoHotkey Version: 1.x ; Language: English ; Platform: Win7 ; Author: Jason Davis <friendproject@> ; ; Script Function: ; Template script (you can customize this template by editing "ShellNew\Template.ahk" in your Windows folder) ; #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory. /* PRINTSCREEN = Will run Windows 7 snipping tool */ PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe return

    Read the article

  • windows server 2008 instance on KVM stuck in 'Pause' mode

    - by mdoust
    I have a windows Server 2008 instance as a guest on KVM. When I tried to run it via virtual machine manager, the process got frozen after few seconds and trying to resume the process lead to this error from virt-manager: Error unpausing domain: internal error unable to execute QEMU command 'cont': Resetting the Virtual Machine is required I tried to Reboot it without any success. Any help will be highly appreciated.

    Read the article

  • windows 7 file permission problem

    - by user20989
    i download one zip folder and extract it in windows 7. after extracting it shows file names with green color. now when i try to open any file, it give error access denied. even i set the permission on that file for full control, same error is coming. if i extract same folder in windows vista or xp no error. actually attribute of file is AE and when i right click on file and then select properties-- general-- advance -- encrypt contents to secure data is selected. if uncheck this option i can't apply it again gives error permission denied. Thanks

    Read the article

  • Carbonite Restore Error after Windows Update

    - by Rev
    I recently installed Windows 8 on my main machine, and I'm have an issue with Carbonite. I can't restore any files from my previous OS, only files that where backed up from the current OS. I can download them from the web service, but I can't restore them with the client. The error says "You don't have the necessary security permissions to restore this file." (The file on top was backed up from the new install, while the one on bottom was from the old install.) I'm also having another issue, where Carbonite doesn't think it's running in admin mode. I think it's probably related to this error. When I right click to restore a file, I can't choose a location to restore to. I contacted Carbonite, and they said it's a known issue that apparently happens when upgrade from XP to 7, but they wouldn't help me since I'm running a beta OS. Hopefully one of you fine folks will have an idea.

    Read the article

  • WEIRD netstat behavior on Windows XP re: www.partypoker.com

    - by tbone
    I really don't know if this is the right place to ask this, but I would really appreciate if someone that is more savvy on Windows XP (Professional) could help me out. For background, I am a 10+ years programmer, so I'm not a total idiot, but I am far from an expert on TCP/IP, etc, and this has me totally confused. When I do a netstat (on Windows XP) I seem to always get a huge amount of www.partypoker.com connections and I can't figure out where they are coming from. A netstat -o shows me that some are coming from PID xxx, which is firefox, but if I kill it, the connections still remain. Some are coming from PID 0, which makes no sense to me. SECOND PROBLEM: One would think you could edit the C:\WINDOWS\system32\drivers\etc\hosts file to block this, but it seems like my machine is ignoring the hosts file! (I have tried with the DNS client service both enabled and disabled, same result). So I just rebooted, killed all my normal programs, and I can't seem to reproduce the problem. If I was a paranoid person, I would think there was some sort of an intelligent trojan running. I am running Windows XP Pro, Kaspersky Antivirus, ccCleaner, and am fully up to date on Windows Update. What gives???? So, I guess my questions are: 1. Is anyone else seeing these wird connections to partypoker.com? 2. Why isn't my hosts filter working? 3. Is there some utility I can run to find out whats happening? I've tried autoruns.exe from sysinternals but don't see anything interesting. Am I the only one with this problem? If there are any additional things you need me to run, let me know.

    Read the article

  • Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

    - by ben
    I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

    Read the article

  • Suppressing / Accepting warning windows automatically in commands executed through batch file

    - by David Somach
    I am automating the uninstall of IE9 through executing the command in these instructions inside a batch file: http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/how-to-uninstall-ie9-beta-64-bit-it-is-not-in-the/863d8f3d-c4ab-43e6-9d57-e163ea3baddd The instructions say to run the command twice. The first time the command runs, I get the following error window (3 times): "Windows Package Manager Operation failed with 0x80070005 Access id denied." I click OK for each of these windows, and the rest of the script runs fine and IE8 is usable after restart. Is there a way to suppress these windows? I want this to be fully automated and these windows block the script until the user presses "OK".

    Read the article

  • Windows 7 Printing to a network printer

    - by JohnyV
    We have a 2008 server as our print server. Clients that use windows xp with a logon script to map have no problems printing. When I test printing to a network printer on a windows 7 machine it works fine up to a few machines as soon As i get 12-15 workstations trying to print, when they log in they get the yellow exclamation mark and needs troubleshooting against the printer name. It is being deploy by group policy. I have tried to deploy it by group policy also by group policy preferences and by using a script and i get the same error whatever i try. Does anyone have any suggestions to try and troubleshoot? Once again Windows xp clients have no issues printing at all. It is only windows 7 clients. Thanks

    Read the article

  • how to solve error after installing IIS 7 on win 32

    - by raman
    I have installed IIS 7 on my desktop, but when I run the IIS shortcut and click on connect to local host or server, I get the following error. Failed to connect There was an error when trying to connect. Do you want to retype your credentials and try again? Details: Could not load file or assembly 'Microsoft.Web.Administration, Version=7.0.0.0 Culture=neutral, PublicKeyToken=31bf3856ad364e35` or one of its dependencies. The system cannot find the file specified. What do I do to solve this?

    Read the article

< Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >