Search Results

Search found 14131 results on 566 pages for 'note'.

Page 234/566 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot

  - by Tibi

  TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot. When i start my laptop (Acer TravelMate 2410). after the starting memory check, the screen goes full black, and a message appears for about 3 seconds: Warning! Password locked: Fixed disk0 and after that, disappears, and next message comes out: Operating System Not Found and all stops here. Windows Xp was installed on it, before this came. TrueCrypt cd (witch was made during the process of full encryption) is not working, not in restoring MBR, no even in decrypting my drive - completely useless. Note: I detected some short of boot sector errors (i dont know the amount) on my drive before this happened. Please, i would greatfully thank every comment, or suggestion, because my computer is unusable now. The HDD is a Samsung HDD, 160Gb. Other preferences: Acer TravelMate 2410 Notebook, 2 Gb RAM, 1500 Mhz Intel Celeron M processor. Regards

  Read the article

• How much ethical is to accept second offer while serving notice period for first company? [closed]

  - by iammilind

  I had got an offer from a company X 2 months back. Though the compensation was pretty good, I asked for more. They declined and I continued my search for the best. I was expecting good companies (Y, Z) will contact me, but that din't happen. Then 2 months later, now I re-approached company X again and they issued me the same offer. I accepted it, resigned from my current company and serving the notice period (2 months). Now the twist: I got calls from Y and Z (good companies). They definitely give better compensation. If they select me then my plan is to accept the better offer from Y/Z and inform the X immediately that I have got better opportunity, so I will not be able to join the company... Is this ethical ? [Edit Note: I have to just send an acceptance email (i.e. no contract signing) which doesn't legally bind me to join that company. So, legally I am not doing anything wrong. However, I am worried that if I am doing right/wrong ethically.]

  Read the article

• Cannot install VS Team System 2008 on Windows 7 Ultimate (64bit)

  - by systemX

  I am trying to install VS TS 2008 on W7 Ultimate (64bit), but I have run into errors during the setup. Please take note that I have tried to mount the iso to a virtual drive, and also extracted the iso contents to a local folder. Both methods have failed and produce the same error log below. [10/26/09,03:02:40] Runtime Pre-requisites: [2] Error: Installation failed for component Runtime Pre-requisites. MSI returned error code 1603 [10/26/09,03:02:42] VS70pgui: [2] DepCheck indicates Runtime Pre-requisites is not installed. [10/26/09,03:02:42] VS70pgui: [2] DepCheck indicates Microsoft Visual Studio 2008 64bit Prerequisites (x64) was not attempted to be installed. And the list goes on and on.. This is a fresh install of W7, and I have not installed Microsoft Office 2007 at all yet, not sure if it would be causing my errors right now.. I appreciate any help I can get thank you.

  Read the article

• How to calculate new velocities between resting objects (AABB) after accelerations?

  - by Tiedye

  lately I have been trying to create a 2D platformer engine in C++ with Direct2D. The problem I am currently having is getting objects that are resting against each other to interact correctly after accelerations like gravity have been applied to them. Right now I can detect collisions and respond to them correctly (I think) and when objects collide they remember what other objects they're resting against so objects can be pushed by other objects (note that there is no bounce in any collisions so when objects collide they are guaranteed to become resting until something else happens). Every time the simulation advances, the acceleration for objects is applied to their velocities (for example vx += ax * t, where t is time elapsed since last advancement). After these accelerations are applied, I want to check if any objects that are resting against each other are moving at different speeds than their counterparts (as different objects can have different accelerations) and depending on that difference either unlink the two objects so they are no longer resting, or even out their velocities so they are moving at the same speed once again. I am having trouble creating an algorithm that can do this across many resting objects. Here's a diagram to help explain my problem

  Read the article

• WebsitePanel 2 totally NOT working on Windows Server 2012 on Azure

  - by Carmine Giangregorio

  I’m having many troubles installing WebSitePanel on an Azure Virtual Machine, with Windows Server 2012. I followed the steps in http://www.websitepanel.net/documentation/deployment-guide/server-configuration/preparing-windows-server-2008-r2-for-websitepanel-installation/ and installed everything I needed. Then, I installed the WebSitePanel Standalone Server package with the installer. I opened the endpoint for the port 9002 on Windows Azure; so I pointed my browser to myhostname.cloudapp.net (note: in Azure you don’t have a static IP address, instead you have an hostname like [hostname].cloudapp.net). So, loading myhostname.cloudapp.net:9002 fails, and any browser shows something like “Unable to load page”. Notice: if I try to load the WebSitePanel Portal directly on the server, I get an error HTTP 400 Bad Request. How come? IIS works perfectly on the server, in fact the default website runs without problems on port 80.

  Read the article

• How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

  - by withakay

  Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

  Read the article

• How to identify who is using Hardware Reserved Memory in Windows 7

  - by blasteralfred

  I run Windows 7 x86 Home Premium. I have an installed physical memory of 4 GB, out of which, 2.96 GB is usable (My Computer Properties). I checked the memory usage using Resource Monitor and found 3036 MB / 4096 MB is available. I noticed that 1060 MB is unavailable since it is reserved by some "Hardware component(s)". I would like to know which hardware component is using this 1060 MB. Is there any way or tool to identify this? Note: I know that Windows 7 Home Premium x86 supports a maximum of 4GB RAM.

  Read the article

• Exchange 2007 mailbox reassignment

  - by John Virgolino

  I am trying to move a mailbox from one user account to another within a single AD domain. We are using Exchange 2007. I have followed these steps: Disable the account From "Disconnected Mailbox" container, connect to the new account I get a success message When I try to login to OWA using the new user account, I get this message: Outlook Web Access could not connect to Microsoft Exchange. If the problem continues, contact technical support for your organization. Request Url: https://mail.somedomain.com:443/owa/default.aspx User host address: 1.2.3.4 Exception Exception type: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException Exception message: Cannot open mailbox /o=cgsexchangeorganization/ou=exchange administrative group (fydibohf23spdlt)/cn=recipients/cn=someuser. NOTE: I changed some identifying information for security purposes. I have tried multiple times and get to the same place. When I login to OWA with old account, I get an error that the mailbox cannot be found, which makes total sense. Does anybody have any ideas on this? Thanks!

  Read the article

• phpMyAdmin logs out when selecting database

  - by deed02392

  I'm having an issue with pma whereby after logging in (as root or the database owner), and trying to switch to a certain database, I am automatically logged out. I cannot do any actions on the database and in the page that loads immediately before I'm logged out I note that I can't see any tables in the database. The database is accessible by the cli mysql program and all records are still present. To clarify: Literally login works fine, I can browse ALL databases except the one of my projects. Trying to use that database causes the phpMyAdmin session to end. Thanks!

  Read the article

• why skype is not available on messengers like pidgin

  - by sterz

  i really like pidgin, empathy etc. (especially pidgin) because they gather all accounts like xmpp, msn etc. together except skype. i know skype uses a proprietary protocol but so does msn and it is available on pidgin. is it that hard to "put" skype on pidgin or alike messengers? what is the reason that skype is not implemented in pidgin? note: i know there is a plugin for pidgin to support skype but it requires the official skype client to be installed and running. pretty useless.

  Read the article

• How to fix windows new line character on sftp synchronization in eclipse (pdt)

  - by superspace

  Hello, I have a problem with windows new line characters being introduced into text files on eclipse sftp synchronization (via jcraft's sftp plugin). I've set "New text file line delimiter" to Unix and have even sanitized the file with "fromdos" but every time i upload using the sftp plugin, windows new line characters can be seen in the remote file as "^M" characters (when viewed in vi). A point to note is that if i upload using an external sftp client, it's all fine. Eclipse Version: PDT (Helios) SFTP: jcraft sftp plugin Local Environment: Ubuntu 10.04 Remote Environments: FreeBSD 6.4, Debian 4.0 What am i missing? My co-workers would thank you for the solution :) Thanks in advance.

  Read the article

• Do you think we will ever settle on a "standard" platform? [closed]

  - by GazTheDestroyer

  The recent explosion of phone platforms has depressed me (slightly), and made me wonder if we will ever reach any kind of standard for presentation? I don't mean language or IDE. Different languages have different strengths and I can see that there may always be a need for disparity, although I do note that languages are merging somewhat in functionality, with traditional imperitive languages like C++ now supporting things like lambdas. What I'm really talking about is a common presentation mechanism. Before smart phones and tablets came along, the web seemed to be finally becoming a reasonable platform for presenting an application that was globally accessible, not just geographically, but by platform too. Sure there are still (sometimes infuriating) implementation differences and quirks, but if you wrote a decent site you knew it could be accessed on anything from a PC to a phone to a C64 running the right software. "Write Once Run Anywhere" seemed to finally be becoming a reality. However, in the last few years we've seen an explosion of mobile operating systems, and the ubiquitous "app". A good site is no longer enough, you need a native "app", and of course we have a sudden massive disparity in OS, language, and APIs needed to write them as each battles for supremecy. It's kind of weird how the cycle of popularity goes. Mainframes with terminals - thin client. PC - thick client. Web browser - thin client. Phone app - thick(ish) client. I just wonder if you think there will ever be a global standard for clients, or whether the "shiny and different" cycle will always continue along with the battle of the tech du jour.

  Read the article

• High Availability

  - by mattjgilbert

  Udi Dahan presented at the UK Connected Systems User Group last night. He discussed High Availability and pointed out that people often think this is purely an infrastructure challenge. However, the implications of system crashes, errors and resulting data loss need to be considered and managed by software developers. In addition a system should remain both highly reliable (backwardly compatible) and available during deployments and upgrades. The argument is that you cannot be considered highly available if your system is always down every time you upgrade. For our recent BizTalk 2009 upgrade we made use of our Business Continuity servers (note the name, rather than calling them Disaster Recovery servers ? ) to ensure our clients could continue to operate while we upgraded the Production BizTalk servers. Then we failed back to the newly built 2009 environment and rebuilt the BC servers. Of course, in the event of an actual disaster there was a window where either one or the other set were not available to take over – however, our Staging machines were already primed to switch to production settings, having been used for testing the upgrade in the first place.   While not perfect (the failover between environments was not automatic and without some minimal outage) planning the upgrade in this way meant BizTalk was online during the rebuild and upgrade project, we didn’t have to rush things to get back on-line and planning meant we were ready to be as available as we could be in the event of an actual disaster.

  Read the article

• How to quickly start Programs like "regedit.exe" from the Windows 7 search bar using substring matching?

  - by Palmin

  The search bar in Windows 7 is very convenient to quickly start applications by pressing the Win-key and then entering the name of the application. For applications with a Program Menu entry like Firefox, it is sufficient to type Fire and Firefox will be displayed in the Programs section of the search results. For other applications like regedit.exe, I have to type the full command regedit before the correct choice regedit.exe appears. Is there any way to have regedit.exe appear already when I have just entered a substring? Please note: I have seen Add my applications to Vista’s Start Search, but I don't want to add anything to the Start Menu manually. This question is about if there is some configuration that can be tuned to make the results appear. I have also seen Search behavior of Windows 7 start menu, but my problem is not that the exe appears under Files, regedit.exe correctly appears under Programs, but it should appear already for a substring match.

  Read the article

• Two Hidden NetBeans Keyboard Shortcuts for Opening & Toggling between Views

  - by Geertjan

  The following are two really basic shortcuts for working with NetBeans editor windows that will be added to the Keyboard Shortcuts card for NetBeans IDE 7.2: Ctrl-Alt-PgUp/PgDown: Shortcuts for switching between editor types (e.g. Source, Design, History buttons). Switching between the editor types is a frequent operation sometimes, e.g., when using GUI builder, and while it can be done easily via mouse, or from View | Editors menu, it is very handy to know the shortcuts as well. Ctrl-PgUp/PgDown: Similarly, these are shortcuts for switching to next/previous opened document (tab). Note this is not like Ctrl-Tab that cycles in the last used order, but going through the tabs as they appear in the editor. Both shortcuts should fit into the "Opening and Toggling between Views" section. These are important to mention on the card because they are not visible anywhere else in the UI (as there are no menu items like "Go to next/previous editor type" or "Go to next/previous document"). Reported by Tomas Pavek from the NetBeans Team, here: http://netbeans.org/bugzilla/show_bug.cgi?id=213815

  Read the article

• How do you move files to Windows Server 2008 cloud server from local computer?

  - by Mausimo

  I recently setup a Windows 2008 R2 server on Amazon EC2. I now want to move an application I created on my local desktop to this server. However, having never done this before I have no idea how to transfer files from my local desktop to the online server. What is the standard convention for transferring files from local machine to the server? As a side note, why can I not download the .NET framework 4 .exe file? Clicking the download link does nothing... (it is already a trusted site)

  Read the article

• Tracking my home IP from anywhere on the internet?

  - by oKtosiTe

  I have an ISP that serves semi-permanent IPv4 addresses. They can't promise fixed IP addresses, but unexpected changes are quite rare. This begs me to ask however: what would be the easiest/most reliable way to track my home IP address so I can access my (Windows 7) home server even in the case of an address change? Please note: for reasons that I don't want to go in to, I'd like to avoid using any "dynamic DNS" type services. Instead I'd prefer some way to perhaps have the home server leave an occasional/triggered "address stamp" on a remote, off-site server (by SSH, HTTP post or similar, preferably over an encrypted connection).

  Read the article

• UTF-8 locale portability (and ssh)

  - by kine

  I spend a lot of my time sshed into various machines, all of which are different (some are embedded, some run Linux, some run BSD, &c.). On my own local machines, however, i use OS X, which of course has a userland based on FreeBSD. My locale on those machines is set to en_GB.UTF-8, which is one of the available options: % echo `sw_vers` ProductName: Mac OS X ProductVersion: 10.8.2 BuildVersion: 12C60 % locale -a | grep -i 'en_gb.utf' en_GB.UTF-8 Several of the more-capable Linux systems i use appear to have an equivalent option, but i note that on Linux the name is slightly different: % lsb_release -d Description: Debian GNU/Linux 6.0.3 (squeeze) % locale -a | grep -i 'en_gb.utf' en_GB.utf8 This makes me wonder: When i ssh into a Linux machine from my Mac, and it forwards all of my LC_* variables with that 'UTF-8' suffix, does that Linux machine even understand what is being asked of it? Or is it just falling back to some other locale? In either case, what is the mechanism behind its behaviour, and is it dependent on any particular set-up (e.g., will i see the same behaviour on a BusyBox-based system as on a GNU-based one)?

  Read the article

• Quitting a small start-up where you are a primary developer?

  - by programmx10

  Just curious to hear from other people who may have been in similar situations. I work for a small startup (very small) where I am the main developer for a major part of the app they are building, the other dev they have does a different area of work than I do so couldn't take over my part. I've been with the company 5 months, or so, but I am looking at going to a more stable company soon because its just getting to be too much stress, overtime, pressure, etc for too little benefit and I miss working with other developers who can help out on a project. The guy is happy with my work and I think I've helped them get pretty far but I've realized I just don't like being this much "on the edge" as its hard to tell what the direction of the company is going to be since its so new. Also, even though I'm the main dev for the project, I would still only consider myself a mid-level dev and am selling myself as such for the new job search. Just to add more detail, I'm not a partner or anything in the company and this was never discussed, so I just work on a W2 (with no benefits of course). I work at home so that makes it easier to leave, I guess, but I don't want to just screw the guy over but also don't want to be tied in for too long. Obviously I would plan to give 2 weeks notice at least, but should I give more? How should I bring up the subject because I know its going to be a touchy thing to bring up. Any advice is appreciated UPDATE: Thanks everyone for posting on this, I have now just completed the process of accepting an offer with a larger company and quitting the startup. I have given 2 weeks notice and have offered to make myself available after that if needed, basically its a really small company at this point so it would only be 1 dev that I would have to deal with... anyways, it looks like it may work out well as far as me maintaining a good relationship with the founder for future work together, I made it out to be more of a personal / lifestyle issue than about their flaws / shortcomings which definitely seems to help in leaving on a good note

  Read the article

• what should I read in Windows [closed]

  - by Umesha MS

  I think I am asking generic question. Being a developer in windows what should I read to improve my skills? Do I need to read concepts on need basis or do I need to read concepts well in advance? If I want to read the concepts in advance then what topics do I need to read. (Note : I am a Windows developer. I use c++ programming language, Win32/MFC frame work and I use Visual studio IDE.) Updated: To be more specific when a fresher comes to my team I will ask him to read the following things and I tell him that these are very important. 1)C++ : 1 The C++ Programming Language by Bjarne Stroustrup's 2 Thinking in C++ 2nd Edition by Bruce Eckel 2)Win32/MFC : 1 Programming Applications for Microsoft Windows by Jeffrey Richter 2 windows programming by charles petzold 3 Programming Windows with MFC –by Jeff Prosise For 2 years and above developer I ask them to read 1)Above concepts (C++ and Win32/MFC)are mandate 2)Design Pattern : 1)Gang Of Four. 2)Head first patter. 3)Design princples. But for above 6 years’ experience developer what are the concepts are important.

  Read the article

• X crashes and GNOME loses all its configuration

  - by Oli

  About every 3 days on my desktop (always on), X crashes, gdm restarts and it dumps me at a login screen. When I log in Gnome appears to have lost a lot of its settings: it plays sounds in weird places, UI elements look like they're from the 90s (GTK+ defaults) and it's generally pretty hideous. Note everything works fine. It's not like my profile doesn't exist because I can browse the internet fine (Firefox knows my bookmarks, history, passwords, etc) and my desktop is unscathed (apart from the icon theme). Manually restarting gdm doesn't fix this. I have to do a full reboot. Now I'm almost certain that this is a nvidia issue causing X to baulk (I've seen similarish threads on nvnews) and I'm happy with that (my fault for running their latest drivers all the time). What I'm concerned about is why Gnome looks so fugly. Is there anything I can do to force it to reload its settings without restarting the whole computer. Restarting is an issue for me as I run several daemons that other computers on the network depend upon. This is what I mean by ugly/fugly... Look at that scroll bar!

  Read the article

• In windows 7, how do I disable "Ease of Access" pop ups on the logon screen as I am typing my password?

  - by Silfheed

  So the question is pretty much in the title. Things to note: 'Use On-Screen Keyboard' is un-checked I have disabled Ease of Access by replacing utilman.exe But my problem now is that when I'm typing my password, It'll stop all together on the 'u' or the 'p' character and I have to click on the ease of access button then move focus back to the password to continue. Yes, one obvious solution is to not use a password that has 'u' or 'p' in it (which I've done), but that's obviously not a completely satisfying answer. Thanks! I feel a tumbleweed badge...

  Read the article

• Why is an Ext4 disk check so much faster than NTFS?

  - by Brendan Long

  I had a situation today where I restarted my computer and it said I needed to check the disk for consistancy. About 10 minutes later (at "1%" complete), I gave up and decided to let it run when I go home. For comparison, my home computer uses Ext4 for all of the partitions, and the disk checks (which run around once week) only take a couple seconds. I remember reading that having fast disk checks was a priority, but I don't know how they could do that. So, how does Ext4 do disk checks so fast? Is there some huge breakthrough in doing this after NTFS came out (~10 years ago)? Note: The NTFS disk is ~300 GB and the Ext4 disk is ~500 GB. Both are about half full.

  Read the article

• Why does yum index get corrupted?

  - by TomOnTime

  Occasionally yum's cache gets corrupted and we see errors like this: error: db3 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery error: cannot open Packages index using db3 - (-30974) error: cannot open Packages database in /var/lib/rpm The workaround is rm -f /var/lib/rpm/__db* and then the next "yum" command regenerates the data. My question is: what is likely to be causing this? Is there some common task that ignores locks or has other problem that causes this? We have hundreds of CentOS machines and there is no pattern to which see this problem. It could be a "one in a million" issue, which at large scale is seen often. NOTE: I realize this is a very "open ended" question, but if an answer finds the cause, I will go back and turn the question into something more canonical that directly relates to the specific issue.

  Read the article

• MySQL Connector/NET 6.9.1 beta has been release

  - by Roberto Garcia

  Dear MySQL users, MySQL Connector/Net 6.9.1 a new version of the all-managed .NET driver for MySQL has been released. This is a beta release for 6.9.x and is not recommended for production environments. It is appropriate for use with MySQL server versions 5.5-5.7. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloadsandmirrorsites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) Changes in MySQL Connector/Net 6.9.1 (2014-05-29, Beta)    Functionality Added or Changed      * Asynchronous methods are now supported.    Bugs Fixed      * When a client refreshed a web page associated with an expired        session and if the ASP.NET project was using <SessionState ...        regenerateExpiredSessionId="true" ...>, a "duplicate entry"        exception was generated from the MySqlSessionProvider. (Bug        #18657550, Bug #70409) The documentation is available at: http://dev.mysql.com/doc/refman/5.7/en/connector-net.html Enjoy and thanks for the support! On behalf of the MySQL Connector/NET and the MySQL/ORACLE RE Team. 

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >