Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 235/328 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • PostgreSQL failover cluster on Windows Server

    - by user36997
    We are looking for advice on how to setup a basic failover cluster for our application: We will be using 4 machines running Microsoft Windows Server (most probably 2003). All four will always run our application, which is essentially a web service. Load balancing is "outsourced" - somebody else handles the distribution of the web requests among the servers. Only one of the servers will be running the PostgreSQL server actively at any given time. Another server (of the four) also has the DB installed, but is on standby/passive. The DB data is stored on shared storage. No copying data between servers. Reads are done very frequently by many end-users, and in rather small chunks of data. Writes are done much less frequently, by less users, and in very large bulks of data. Now, how can one configure Microsoft Cluster Service to keep only one instance of the DB server and 4 instances (1 per server) of our application at all times? And does PostgreSQL integrate neatly with MSCS at all? Update: Instead of keeping the data on shared storage, I also consider using log shipping to replicate data on a couple of DB servers. There are two issues with this option: Log shipping only makes sure that I have a second server that gets all of the data and is ready to take over. How do I implement the actual failure detection and failover switch? Switching back: Suppose the master fails and the system automatically fails over to the slave, and later the master comes back online. I understand that with WAL shipping this will require to reconfigure the log shipping once again, and that switching back is far from seamless. Is that so?

    Read the article

  • TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

    - by Petruza
    I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

    Read the article

  • Need help diagnosing my machine

    - by Tom Collins
    I have something that just slows my computer to a crawl sometimes. Not running anything big. Yesterday all I had running (besides background apps) were Firefox & Windows Explorer and could barely even switch screens. Nothing showing up in the task manager as hogging CPUs. I have all non-essential services stopped (MySQl & MSSQL) unless I need them. I made some restore points not long ago, but they disappeared. This is a development mach with a LOT of apps installed, so I really, really do not want to re-install Windows. So, what I'm looking for are ideas or tools I can use to help diagnose this problem. The only clues I have is this started right after I installed Office 2013 (with Office 2010 still installed as well) installed Visual Studio 2012 (also keeping 2010 as a co-install) and installed MSSQL 2012 (upgrade from 2008, no co-install) Also, computer runs fine in Safe Mode. I've just ran out of ideas of what to check. Any help / suggestions would much appreciated. Thanks P.S. I'm running Win 7 Pro (x64). Office is also 64 bit. Visual Studio & MSSQL are 64 bit if that option was available (not sure).

    Read the article

  • Why does Windows 7 always automatically change the input or keyboard language?

    - by B-Ball
    I am wondering why Windows 7 always automatically changes my input or keyboard language. I've a notebook with an integrated QWERTY keyboard English (United States). Traveling, I use that one but, additionally, I've my own as well as a much better keyboard at home which is a QWERTZ keyboard German (Germany). Thus, being at home, I'd like to use my QWERTZ keyboard. Unfortunately, Windows 7 does not play along at this one. Every time, I start up my notebook, it is usually set to English (United States) but that's not the problem. In case, I'd use my notebook QWERTY keyboard English (United States), that's fine. However, if I start up my notebook and I'd like to use my QWERTZ keyboard German (Germany), I usually press ALT + Left Shift in order to switch from English (United States) to German (Germany) and Windows 7 switches the input language but only for the program that is currently open. If my input language is set to German (Germany) and I, e.g., open NotePad, Windows 7 automatically switches my input language to English (United States). This is very annoying since I've to change the input or keyboard language to German (Germany) every time I open up a new program. Why doesn't Windows 7 stay with one input language if I changed it manually by pressing ALT + Left Shift? Why doesn't the manual change of the input or keyboard language apply for the whole Windows 7? Why does it only affect the currently opened program? Since I've two keyboards with two different layouts, I seriously need to have both of the keyboards languages installed. I tried both of the below settings in order to find a solution for my problem. Currently, I am using the first option, two input languages. First option: two input languages: Second option: two keyboard languages:

    Read the article

  • Why should one have a secondary DNS server?

    - by Sam Levin
    I'm very confused. I basically understand how DNS works. Here's an example that helps illustrate what I'm having trouble understanding. Right now, I run a small web-server. I use my provider's DNS manager, so I don't have a DNS server hosted on the machine. Let's say for a second, that I don't use my host's DNS, and I decide to set up a DNS server on my server. Hypothetical scenario: my server (entire) server goes down - DNS included. Why do I need backup DNS? If the server is down, who cares if the DNS server is down too, considering that even if I had DNS up (it wasn't on the crashed server), it wouldn't be able to forward requests anyway since the server would be down? Is the point of having secondary DNS, to be able to change the IP addresses that your DNS server points to, so if your webserver was down, you could redirect traffic to a backup? How would you switch to the secondary provider, in the event that your main DNS provider becomes unavailable? Is a backup DNS system basically up all the time? How is it configured? Is it just an exact clone of the DNS server you would have on your server? Do they run simultaneously? Hopefully someone can see what I'm hung up on, and provide some guidance. Thanks

    Read the article

  • Virtualization and best hardware sharing scenario for me

    - by azera
    Hello, Following this thread on super user, I now want to start installing all my vm on the hardware. As a remainder, i have a (powerful enough) server on which i want to install 3 OS: there is a debian (general dev testbed purposes), an ipcop (network control/firewall) and a freenas (local network file sharing). I'm wondering which scenario would be the best for me and if I will be able to share the hardware to do what i want; either a - install an hypervisor like the free vmware esx and all three vms in it, or b - install debian, and the other two running inside it with virtual box My need being that: the ipcop should handle all network traffic to the internet, meaning all traffic from my main computer but also all traffic from the other two vm the freenas shares should be accessible from the other two vm and my main computer too i don't really care about the debian access, i only need to access it from my main computer, not the other vms Will I need to install additionnal network cards for each vm or can they all share the same one happily ? (right now I have two, one linking the server to my router [which only ipcop is gonna use] and one linking it to my switch [which i would like all three to use]) As for harddrives, I was going to use 1 harddrive cut in 3 partitions to install all three OSes, then add to that the freenas drives, will it be correct ? Thanks a lot for anyone who can help me, this is kind of a vast area and I'm not sure which way to go at all

    Read the article

  • SPDIF passthrough not working in Windows 7

    - by adriangrigore
    Hi, I'm running Windows 7 on a computer with an Audigy Platinum eX sound card connected to a surround receiver via optical cabling. Sound works fine when listening to non-surround audio sources, such as windows sounds or MP3. However, when I view a DVD in Media Center and the SPDIF passthrough kicks in, I can only hear an awful noise instead of the movie soundtrack. Also, the receiver does not show the Dolby Digital or DTS symbol, but stays at Dolby Prologic, so it seems it doesn't identify the sound encoding properly. I could switch off SPDIF passthrough and use the sound card's decoder instead, but that's not an option for me since it would create more problems with regular MP3 playback via additional Stereo Receiver which is also connected to the same sound card. I've tried both the default Audigy drivers that come with Windows 7 and the latest drivers from the Soundblaster website, but the problem remains unchanged. Also, I have ensured that the receiver's Dolby Digital decoder is not broken by successfully connecting it to my PS3 to view a Dolby Digital DVD. Besides, SPDIF passthrough was working fine in Vista before I upgraded to Windows 7. Is there anything else I could try?

    Read the article

  • Outlook Shared Address book and contact not displaying

    - by user224061
    We have a shared Exchange addressbook with distribution email groups. When someone connects to the shared addressbook, composes an email to a group, the email distribution list is empty, then the distribution list is expanded. In troubleshooting, I noticed that when we expand the distribution list to view the recipients, most of the recipients are missing and only semicolons appear. CLICK HERE FOR IMAGE Further troubleshooting, I notice that when I open the distribution list with my Outlook client and click on the Update Now icon, and then go to create the email then when I expand the group the email addresses now appear. CLICK HERE FOR IMAGE Now, my Outlook profile is a cached profile. The shared contact list that I pulled the distribution list from is an online/non-cached shared contact list. What I also found is that if I switched my Outlook client to be online only(not cached) the share address book lists appear properly when expanded. Is there any way to make this list appear correctly without having to click on update now for each and every distribution list in the shared contacts list we have on the server? I would really prefer that every time one wants to use this shared contact list, they do not have o click the update not button or switch from cached mode to make this work. T.I.A

    Read the article

  • How do I get a Wireless N PCi card to connect to a wireless G router?

    - by Andy
    I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

    Read the article

  • nconf deployment.ini configuration for a basic Nagios server on CentOS 6.2

    - by jshin47
    I have set up nconf and Nagios but I cannot figure out how to configure deployment.ini to properly deploy the generated configuration to /usr/local/nagios/etc. Here are the directory listings of interest: [jshin@nag0 tmp]$ ls Default_collector global [jshin@nag0 tmp]$ cd Default_collector/ [jshin@nag0 Default_collector]$ ls advanced_services.cfg hostgroups.cfg service_dependencies.cfg services.cfg host_dependencies.cfg hosts.cfg servicegroups.cfg [jshin@nag0 Default_collector]$ cd .. [jshin@nag0 tmp]$ cd global/ [jshin@nag0 global]$ ls checkcommands.cfg contacts.cfg misccommands.cfg timeperiods.cfg contactgroups.cfg host_templates.cfg service_templates.cfg [jshin@nag0 global]$ cd .. [jshin@nag0 tmp]$ cd /usr/local/nagios/etc/ [jshin@nag0 etc]$ ls cgi.cfg htpasswd.users nagios.cfg objects resource.cfg [jshin@nag0 etc]$ cd objects/ [jshin@nag0 objects]$ ls commands.cfg localhost.cfg switch.cfg timeperiods.cfg contacts.cfg printer.cfg templates.cfg windows.cfg Here is my deployment.ini (pretty much the default setting) ;; LOCAL deployment ;; [extract config] type = local source_file = "/var/www/html/nconf/output/NagiosConfig.tgz" target_file = "/tmp/" action = extract [copy collector config] type = local source_file = "/tmp/Default_collector/" target_file = "/usr/local/nagios/etc/Default_collector/" action = copy [copy global config] type = local source_file = "/tmp/global/" target_file = "/usr/local/nagios/etc/global" action = copy reload_command = "service nagios restart" What I am wondering is why the directory structure that the default deployment.ini seems to suggest, with Default_collector and global, is different from the one that Nagios has by default, with only a folder called objects. What am I missing? Or more importantly, how does your deployment.ini look?

    Read the article

  • Move postfix maildir files from one mail server to another

    - by Tauren
    I have a new mail server configured as described in this howto: http://howtoforge.com/virtual-users-domains-postfix-courier-mysql-squirrelmail-ubuntu-9.10 I also have an ancient mail server configured very similarly (using the same HOWTO, just for Fedora Core 6, if I recall correctly). Earlier today I had to switch from the old server to the new one, and the old one is no longer online. However, after I had migrated everything and switched it all over, I discovered a bunch of undelivered mail in the queue. It got delivered to the local mailboxes on the old server, so now there are a bunch of messages on it that I'd like to move to the new server. The new server has already received new messages, so I need to merge the files together somehow. For each user with an email of [email protected], there are files like this on both servers: /home/vmail/customer.com/username/maildirsize /home/vmail/customer.com/username/courierpop3dsizelist /home/vmail/customer.com/username/new/1271481177.Vca01I6006bM580357.mailhost.mydomain.com Can I simply copy the hundreds of files in the various new directories on the old server to the corresponding new directories on the new server? Will the maildirsize and courierpop3dsizelist files get updated automatically, or do I need to do something to update them?

    Read the article

  • Robocopy launches and then hangs/just sits there

    - by NateO
    I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

    Read the article

  • EEE PC dropbox server running 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • Intel D2500HN Atom D2500 Doesn't turn on

    - by David W
    I recently bought parts from Amazon to build an embedded PC, and have assembled everything. I have: Intel D2500HN Mini-ITX Motherboard Mini-Box Pico-PSU 80 M350 Universal Min-ITX Enclosure 2GB DDR3 Memory Kinamax AD-LCD12 LCD Monitors 12V 6A 72W AC Adapter Power Supply The motherboard gets a light (on the motherboard, not on the Pico-PSU) when I plug it into the power adapter. Furthermore, I see the power switch light come on when I press the power button. However, the display doesn't turn on, and it doesn't seem that the PC is actually turned on. Since I'm seeing these lights, I know that the motherboard is getting power. Furthermore, the display VGA port is embedded into the motherboard, so that's not the issue. I'm just trying to figure out what COULD be the issue aside from a faulty motherboard. I have a diagram of the D2500HN motherboard which labels everything, and have ensured that the power LED as well as the On/Off cables are plugged into the right spots, although to be sure I've tried flipping these two cables around, and also plugging 1 cable into the other cable's spot & vice-versa. Is there anything else you folks think I may be missing, or anything else I can do to try to troubleshoot this issue before sending the motherboard back?

    Read the article

  • Multiple Internet connections, multiple networks and split access in Linux

    - by Swapneel Patnekar
    I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

    Read the article

  • Exchange Online SMTP Not Working With Any Email Client

    - by emre nevayeshirazi
    I am trying to switch our company mail server to exchange online. I have successfully added my domain and users and can send and receive mails through Outlook Web App. I can also send and receive if I configure my Outlook 2013 client using Exchange protocol. However, some folks in company are using Thunderbird and some old Outlook Clients. For those, I tried to connect to Exchange via IMAP/SMTP. This is what I use, For incoming, IMAP / Port : 993 with SSL / Host : outlook.office365.com For outgoing, SMTP / Port : 589 with TSL / Host : smtp.office365.com I can receive emails, however I could not be able to send emails. I keep getting An error occurred while sending mail. The mail server responded: 4.3.2 Service not active. Please verify that your email address is correct in your Mail preferences and try again. My username and password are correct, I am using my mail address as my username to mailbox. I also tried sending mail via C# application which was working for outlook.com and gmail.com SMTP settings. It also fails to send emails and returns the same error code. I thought TB and other old clients such as Office 2003 might not support Exc. Online so I tried same settings in Office 2013. It successfully connected my mailbox when checking for configuration but failed in sending test message and returned the same error code. Configuration for incoming and outgoing mailbox are taken from here. They are also available on Office 365 user page and they are same. What could be the reason for error ?

    Read the article

  • Computer Comparison - which is "better"

    - by David Murdoch
    A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

    Read the article

  • Move an existing RAID 5 array from Ubuntu to Gentoo

    - by Cocoabean
    I have a 64-bit Ubuntu machine with a 4-disk RAID 5 using software raid (md). I've been able to boot an Ubuntu LiveCD and recognize the array with a simple mdadm -A /dev/md0. It was easy to mount after that and nothing had to rebuild. I'm installing Gentoo on this box now (multi-boot, non-RAID root partition) and I have md auto-detect turned on in the kernel. When I boot Gentoo I get: "invalid superblock magic on sdd" for each of the drives in the array. I boot back to Ubuntu and they mount no problem. I tried copying the mdadm.conf that works in Ubuntu to Gentoo, and then ran mdadm -A /dev/md0 but it reports that there is no array named md0. I don't want to lose data (obviously) and I don't want to have to let the RAID rebuild every time I switch between OSes. Any help is appreciated. Both are using mdadm 3.1.4 Both are running 64-bit kernels. mdadm -D /dev/md0 from Ubuntu yields: http://pastebin.com/5gj2QNkV UPDATE: After rebooting I noticed that it still complains about invalid blocks, but cat /proc/mdstat shows an inactive /dev/md127 with the same disks as my raid. I want to mount it but I don't want to get stuck waiting for a rebuild or destroying it inadvertently. mdadm -D /dev/md127 Here is pastebin of mdadm -D /dev/md127 on gentoo: http://pastebin.com/gDCWn0Rn UPDATE II: dmesg output about 'invalid raid superblocks' http://paste.ubuntu.com/885471/ fdisk -l from Ubuntu, /dev/md0 does not have any partitions but I do have it mounted and accessible: http://paste.ubuntu.com/885475/

    Read the article

  • Hardware, network infrastructure for runnng gaming server nd on VirtualGL

    - by archer
    Foud nice project VirtualGL (http://www.virtualgl.org/). Tried to run 3D fames (EVE Online, Prototype) on server and display the output on thin client using 100Mbps network. Server: Gentoo Linux on AMD Phoenom II x6 3.4Gz, 8GB RAM, 2x NVIDIA 9800 GTX in single session with display resulution 1024x768 on client. Performance is very promising. Going to increase network speed to 1Gbps (using either Ethernet or Fiber) and run 5-6 clients simultenously. My questions are: a) what would be better for network - 1Gbps Ethernet or Fiber (clients are distributed in max 20m around server)? Is that a must to use managed switch for better network performance? b) Should I increase number of video cards to put in SLI on server (going to use Gigabyte GA-890FXA-UD7 which has 6 PCIExpress slots [2 x4, 2 x8 and 2 x16]). Will it impact performance significantly. If I need to increase the number of video cards - what would be better - put 2 banks of video cards with 3 in bank using SLI, or 3 banks with 2 in the bank? Would linux recognize that and properly use all banks of video cards? c) any suggestions on good thin clients supporting 1920x1080 HDMI video and 1Gbps network I understand that my questions can't be answered clearly (unless someone already managed to use this kind of stuff ;)) although any suggestions would be very helpful.

    Read the article

  • Need Routing help (tagged/untagged)

    - by TheCleaner
    I really need some help trying to figure some "basic" routing. My brain is fried from being sick for a week and I'm not thinking clearly. Picture below describes my "setup". I'm trying to accomplish routing a user from their workstation to the Juniper SSG520 and then "OUT" through the internet connection. I can't move the connection as it is physically located where the user's switch is. Here's what I CAN do at this point: I can ping from the Juniper SSG520 eth3/3 to 6x.xxx.253.116 from 6x.xxx.253.114 I can ping from the x450 in the top right to 6x.xxx.253.112 from 6x.xxx.253.116 What I CANNOT DO: I cannot ping from the SSG520 eth3/3 to 6x.xxx.253.112 from 6x.xxx.253.114 (basically from the Juniper box to the gateway. I've tried changing port 1 in the x450 VLAN 666 as tagged but when I do that then I can't even ping from the Juniper SSG520 eth3/3 to the VLAN on the x450 (6x.xxx.253.116). I need to route traffic out the eth3/3 interface on the SSG520 THROUGH the 2 x450 Switches and out the internet connection. The caveat is that the 2 x450 switches are connected via fiber over distance and have tagged VLANs in them for the routing. Thoughts? http://img251.imageshack.us/img251/7752/drawing1.jpg

    Read the article

  • Routing for Two Hosts Behind a IPSec Tunnel

    - by Brent
    Network A 10.110.15.0/24 Firewall is .1 Host A is .2 Network B 10.110.16.0/24 Firewall is .1 Host B is .2 Two Cisco ASA's. IPSec tunnel with a crypo map that secures 10.110.15.0/24 <- 10.110.16.0/24. Let's say two hosts, 10.110.15.2 and 10.110.16.2 need to talk to each other. Normally I have to enter a persistent static route on a each host along the lines of: route add 10.110.16.0 mask 255.255.255.0 10.110.15.1 metric 1 -p (on the "A" box) I also have to enter another persistent static route on the .16 host in order for the traffic to know how to get back to the .15 network. Note that the default for each machine IS the firewall, so .1. I have no problem adding persistent routes on Windows/ESX/*nux machines but what about a smart switch in the .16 network that I want to manage from the .15 network. Do I need to run a routing protocol? Do I need to have Reverse Route Injection enabled on both ends of the IPSec tunnel? Should I add a route on the firewall? If so, how do you formulate it? Does it get a metric of 1 and my default route 0.0.0.0 get a metric of 2?

    Read the article

  • Use one NIC to create multiple interfaces for Linux KVM

    - by Phanto
    I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I am very new to KVM, and am still exploring what it can do. Below is the scenario that I am attempting to make (on a CentOS/RHEL 6 system): Linux KVM Host has 1 NIC (eth0) connected to a switch. Create multiple "bridge" or equivalent interfaces that are spawned off of eth0 that would provide a unique IP for each VM. This is so that each VM can communicate with other hosts on the network, and that other hosts on the network can communicate with the VM. IMPORTANT: I would like iptables on the KVM host to be able to manipulate/control/restrict the traffic that would be sent on those "bridge" interfaces. I would like to create a minimum of three VM's, each using their own unique "bridge" interfaces. I have previously made a br0 interface off of eth0, but unfortunately, I am unable to add any more to it. It appears that you can only bridge 1 interface to the NIC. I would like to bridge many to one. Would a tap device be able to do this? If so, how would it be set up? Effectively, I am attempting to replicate what can easily be created with VirtualBox on Windows, where each VM is given a "bridged" interface, and can live on the network. I want to achieve this very same thing with Linux KVM. Thank You EDIT: To be more descriptive, I want to achieve something that looks like this: This can be found on this page: http://en.gentoo-wiki.com/wiki/KVM#Networking_2 HOST +---------------+ | | KVM GUEST1 | | +--------------+ | +------+ | | | LAN ---+--- eth0 | +--+---+---- nic0 | KVM GUEST2 | | tap0----+ | |192.168.1.13 | +--------------+ | | tap1----+ | +--------------+ | | | +------+ | | | | | br0 +--+----------------------+---- nic0 | |192.168.1.12 | |192.168.1.14 | +---------------+ +--------------+

    Read the article

  • FreeBSD slow transfers - RFC 1323 scaling issue?

    - by Trey
    I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

    Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >