Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 235/714 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

• Device Manager - does USB listing look right?

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• How to remap a MacBook keyboard to windows keys in bootcamp?

  - by Ken Pespisa

  I just discovered bootcamp and I'm psyched that I can run Windows 7 RC on the MacBook Pro without using a virtual machine. However the virtual machines run a bit better because they support remapping the MacBook's keyboard. Currently I can't find an equivalent of the delete key (it is Fn + Delete when running Windows via Fusion or Parallels, but it doesn't work on a bootcamp install of Windows) Has anyone come up with a clever workaround?

  Read the article

• Is it possible to boot from a passthrough lsi2008 under esxi?

  - by Kurt

  I currently have Solaris 11 Express running on bare metal. I'd like to convert the machine to an ESXI host and run the existing os as a virtual machine. I have ESXI setup, the virtual machine made, if I boot the vm from the recovery disk the drives and lsi2008 controller is visible. Everything looks like it should work, but the vm bios does not seem to try and boot from the controller. Is this just impossible?

  Read the article

• Should I install software on a "SAN"

  - by am2605

  Hi, I need to set up ColdFusion 9 on a ubuntu server that has a SAN disk mounted. Is it appropriate to install the CF server software on this disk? I don't really understand the ins and outs of what a SAN is, so I am not sure if the intention is for me to solely install web content on it or whether the server software itself should go here too. Any advice would be extremeness welcome. Many thanks, Andrew.

  Read the article

• How can I remount an ejected (not just unmounted) USB drive on Mac?

  - by Pepijn

  I frequently eject an usb stick, and then realize I still need it. If I unmount the drive in Disk Utility, I can just remount it, but if I eject, it's gone. Not showed in Finder Not showed in diskutil Not showed in ls /dev Is still showed in System Information under USB. How can I mount the disk without unplugging and inserting it?

  Read the article

• Can I map several physical interfaces to a single vmware vmnet interface?

  - by EricJLN

  I am using a rack mounted device that has 10 Ethernet ports built into it. For 8 of the ports, I would like to bind them to a single vwmare-server-2.0 virtual network interface, so that I can, in effect, use the ports as a hub for the external devices and internal virtual machines. How can I bridge a single vmware vmnet# interface to several physical interfaces?

  Read the article

• How do I change the default for the "df" command in the Unix terminal from KILOBYTES TO MEGABYTES?

  - by user1656014

  I can't really show the code in Unix, but I can explain it very clearly. In the terminal, when you type "df", you get information on the disk free space all in KILOBYTE units. KILOBYTES is currently set as the default in Unix. My problem is trying to change the default from KILOBYTES to MEGABYTES. After changing of the default, I should be able to type in "df" and all the disk free space should come up in MEGABYTES.

  Read the article

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• How do you manage private queue permissions on a windows server 2008 cluster?

  - by David

  On windows server 2003 there was an option to allow a resource to interact with the desktop, this allowed you to run computer management mmc snap-in on the virtual name of the cluster, allowing you to manage permissions of the private message queues on the cluster. Windows Server 2008 failover clustering has removed that checkbox, so applications can no longer interact with the desktop. My question is then how does one go about managing private queue permissions on the clustered (the virtual name) server?

  Read the article

• howto access esx filesystem

  - by maruti

  need to copy VM files (vmdk etc) to usb disk for backup purposes. tried booting with partedmagic 4.9..but cannot access the vm files on disk. any thoughts?

  Read the article

• Windows Server 2008 IIS

  - by Tone

  I'm trying to do a really simple task - setup a virtual directory in Windows Server 2008. This is what I am doing but it's not working for some reason: Open IIS 7 Create a new virtual directory in Default Web Site and point it to a folder on d:\ drive Browse to folder on d:\ drive and create an .htm file with some test text in it Open a browser and navigate to http://localhost/TestSite/index.htm But I get a 404 - what gives? Edit:I didn't mention at first that this is Server 2008 R2

  Read the article

• How to enable an external USD harddrive with ubuntu

  - by LarsOn

  Hello I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0 GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

  Read the article

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• Using a flash drive to speed up conventional disks (on linux)

  - by Daniel

  Hi! Is there a possibility to use a flash drive as a speed up for conventional hard disks? I got the idea to redirect all read ops to the flash drive if the data is already stored there, and to read from the conventional disks if the data is not found there (and during idle time the freshly accessed data from the conventional disk is stored on the flash disk). Is this already possible with linux standard tools?

  Read the article

• Vmware - How do i config a host-only network

  - by nXqd

  The understanding about Host-only: I use VMware 7, Vmnet1 is the host-only adapter for host and it's IP is 192.168.209.1 . I'm really confused about this , does it connect to Vmnet 1 switch and Vmnet has DHCP also, it provieds IP range: Why it has virtual host adapter ( Vmnet 1) has IP which isn't in range while it's just an adapter in virtual network, it connects through switch Vmnet like the guest adapter Waiting for your answers , thanks in advance :)

  Read the article

• Are Time Machine backups secure?

  - by Leandro Ardissone

  I have my Time Machine backups on an external disk (WD My Passport with no hardware encryption) and I'm worried if the data stored on the disk is safe in case somebody steals it and connect it to any Mac/PC. Does any Mac can browse the Time Machine backups? Or are they encrypted in any way? If no, is there a way to improve security of the backups, should I buy a hardware encryption based HD? Thanks.

  Read the article

• Load balancing with one server and IIS7(.5)

  - by Lieven Cardoen

  Is it possible to configure loadbalancing on one server with IIS7? What I would like is to have three applications in IIS7 (sites). One site should forward the requests to the other two sites (loadbalanced). Problem is that at a customer of ours loadbalancing is used (with virtual servers). We on the other hand do not have (yet) a virtual environment and only one buildserver. (maybe using Application Request Routing module?)

  Read the article

• How to boot Linux and Windows - Windows as Default OS

  - by lions_leash

  I have a dual boot system that works great. I have Ubuntu and XP 64 on one disk and XP on another disk. The Linux boot loader asks me which system to boot, but if I reboot and forget to hit a button, it goes to Linux by default. I would like to boot to XP by default, but somehow retain the option of choosing.

  Read the article

• Proper Imaging Procedures to Restore and Deploy Image with Separate System Reserved Partition

  - by alharaka

  UPDATE: As per my experience here, no one responded. If I do not hear back from TechNet forum members about it, I will post a bounty here, if it makes a difference. I have banged my head against a wall for what seems like all week. I am going to explain my simple procedure, and how none of it, absolutely none, seems to work afterword despite few alternatives and everyone on the internet telling assuming this is how to do it. Diskpart Commands to Create FS Structure REM Select the disk targeted for deployment. REM REM NOTE: Usually disk 0, but drive failure can make it external USB REM media. This will erase the drive regardless! select disk 0 REM Remove previous formatting. clean REM Create System Reserved partition bootloader and files. create partition primary size=100 REM Format the volume format fs=ntfs label="System Reserved" quick override noerr REM Assign the System Reserved partition the D: mount for now assign letter=C REM The main system partition, size not specified to occupy whole drive. create partition primary REM Format the volume format fs=ntfs quick override noerr REM Assign the OS partition the D: mount for now assign letter=D REM Make this the active/bootable partition. sel disk 0 sel partition 1 active REM Close out the diskpart session. exit Now, I thought this was madness, but it turns out the System Reserved partition and standard "System Partition" (C:, commonly both the boot and system volumes where you find the Windows directory AND the bootmgr/ntldr hardware files, this is where Windows 7 diverges) as mounted in the Windows PE session where I run these commands do not matter. See reference here. Since this needs to be BitLocker-ready, enter this crappy System Reserved partition that is separate 100MB of awesome that goes before the regular boot volume. I do this, then I proceed to the next step. Deploy System Reserved and Normal System Images REM C is still the "System Reserved Partition", and the image is just like it sounds. imagex /apply G:\images\systemreserved.wim 1 C: REM D is now what will be the C: system partition on reboot, supposedly. imagex /apply G:\images\testimage.wim 1 D: Reboot the system Now, the images I just captured should look good. This is not even sysprepped, but reapplying the same fscking image I prepared on the same reference workstation hours before. Problem is I get 0xc000000e could not detect the accessible boot device \Windows\system32\winload.exe or different kinds of nonsense revolving around being able to find the boot volume with all the right files. I try different variations of things, now none of them work. I tried repairs with bcdboot, with a fresh System Reserved partition or not, bootrec, and maually editing the damn BCD store with bcdedit. I tried finalizing the above process with and without bootsect /nt60 C: /force. I need to wrap up and automate this procedure. What am I doing wrong that does not make the image happy, but really just miserable.

  Read the article

• windows server 2008 instance on KVM stuck in 'Pause' mode

  - by mdoust

  I have a windows Server 2008 instance as a guest on KVM. When I tried to run it via virtual machine manager, the process got frozen after few seconds and trying to resume the process lead to this error from virt-manager: Error unpausing domain: internal error unable to execute QEMU command 'cont': Resetting the Virtual Machine is required I tried to Reboot it without any success. Any help will be highly appreciated.

  Read the article

• Where can I get Windows XP Images for WMware Workstation

  - by Saif Bechan

  Does anyone know where I can get windows images for vmware. I know Microsoft gives away the images for Virtual PC. These images work pretty well, but when I try to import them in VMware I need to activate the copies again, because the virtual hardware they use is just to different. I want Images of different versions of windows 2000, xp, vista. Does anyone where I can download them, or do I need to build them from CD.

  Read the article

• How can I use cp to copy a directory but ignore a certain sub directory in Linux

  - by P Roy

  Due to a Hard disk problem I am trying to shift a partition from one hard disk to another. I am following http://www.ibm.com/developerworks/library/l-partplan.html article to do that. In the copying part I would like to ignore one particular sub directory. How can I accomplish that keeping in mind when copying I have to preserve my owner group and time stamp. There is around 700 GB of data that needs to be copied if I do not ignore a particular subdirectory.

  Read the article

• How can I use cp to copy a directory but ignore a certain sub directory in Linux

  - by P Roy

  Due to a Hard disk problem I am trying to shift a partition from one hard disk to another. I am following http://www.ibm.com/developerworks/library/l-partplan.html article to do that. In the copying part I would like to ignore one particular sub directory. How can I accomplish that keeping in mind when copying I have to preserve my owner group and time stamp. There is around 700 GB of data that needs to be copied if I do not ignore a particular subdirectory.

  Read the article

• How to recycle/reuse/continue Time Machine for a new Mac?

  - by bmargulies

  I have been backing up a MacBook Pro to an external hard disk with Time Machine. I got a new laptop, used the firewire connector to pull the universe across to it, and started it up. It does not want to just pick up where I left off with the backups; it wants to start a new backup sequence and thus I need a ton of additional disk space. Does anyone know a way to force it to just incrementally back up to the existing backup set?

  Read the article

• Expectations for NTFS file recovery

  - by Fred Hamilton

  Yesterday I booted my XP system, and as I looked up a minute later I saw the light blue screen and tail-end of that pre-boot diskcheck Windows sometimes does if it finds an error (or was previously told to run a diskcheck drung the next boot). I didn't worry about it at the moment... But then I looked at my "scratch" disk, which was a 70% full, 750GB hard disk...and it now looks like it has been freshly formatted. It doesn't have a single file on it, just the hidden "System Volume Information" file and 750GB of freedom from data. I looked at some of the recovery tools from the Free NTFS partition recovery question and decided to try PC INSPECTOR™ File Recovery 4.x initially. It ran overnight and afterwards returned a list of thousands of files it could recover. The odd thing was that the filenames were lost, but the file extensions were not (WTF?). And all of the files were exactly 1,472kB in size. I recovered a dozen PDFs as a test, and 80% of them displayed OK despite being padded out to 1.5MB (though I assume any files 1472kB are hosed). My primary question is: Is this the best I can expect from any file recovery software when trying to recover NTFS files? Or is there perhaps something better out there? I assume this is as good as it gets, but wanted to check in with the experts first. Bonus questions: What might have happened to my drive? I didn't intentionally format it. I've never seen a disk error cause the drive to suddenly become a clean, reformatted drive. Could some malicious/confused software have told my PC to format my disk on reboot? Is that even a function Windows XP has? Why can the file extensions be recovered but not the filename? Does NTFS really treat them as separate entities? I thought I had 8.3 naming turned off, but maybe that had something to do with it. Or maybe it looks at the data in the file and guesses the extension?

  Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >