Search Results

Search found 6392 results on 256 pages for 'bash history'.

Page 236/256 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• How can I force all internet traffic over a PPTP VPN but still allow local lan access?

  - by user126715

  I have a server running Linux Mint 12 that I want to keep connected to a PPTP VPN all the time. The VPN server is pretty reliable, but it drops on occasion so I just want to make it so all internet activity is disabled if the VPN connection is broken. I'd also like to figure out a way to restart it automatically, but that's not as big of an issue since this happens pretty rarely. I also want to always be able to connect to the box from my lan, regardless of whether the VPN is up or not. Here's what my ifconfig looks like with the VPN connected properly: eth0 Link encap:Ethernet HWaddr 00:22:15:21:59:9a inet addr:192.168.0.171 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:15ff:fe21:599a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37389 errors:0 dropped:0 overruns:0 frame:0 TX packets:29028 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37781384 (37.7 MB) TX bytes:19281394 (19.2 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1446 errors:0 dropped:0 overruns:0 frame:0 TX packets:1446 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472178 (472.1 KB) TX bytes:472178 (472.1 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.10.11.10 P-t-P:10.10.11.9 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1368 (1.3 KB) TX bytes:1812 (1.8 KB) Here's an iptables script I found elsewhere that seemed to be for the problem I'm trying to solve, but it wound up blocking all access, but I'm not sure what I need to change: #!/bin/bash #Set variables IPT=/sbin/iptables VPN=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` LAN=192.168.0.0/24 #Flush rules $IPT -F $IPT -X #Default policies and define chains $IPT -P OUTPUT DROP $IPT -P INPUT DROP $IPT -P FORWARD DROP #Allow input from LAN and tun0 ONLY $IPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A INPUT -i lo -j ACCEPT $IPT -A INPUT -i tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -s $LAN -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -j DROP #Allow output from lo and tun0 ONLY $IPT -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A OUTPUT -o tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -d $VPN -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -j DROP exit 0 Thanks for your help.

  Read the article

• Innodb Queries Slow

  - by user105196

  I have redHat 5.3 (Tikanga) with Mysql 5.0.86 configued with RIAD 10 HW, I run an application inquiries from Mysql/InnoDB and MyIsam tables, the queries are super fast,but some quires on Innodb tables sometime slow down and took more than 1-3 seconds to run and these queries are simple and optimized, this problem occurred just on innodb tables in different time with random queries. Why is this happening only to Innodb tables? the below is the Innodb status and some Mysql variables: show innodb status\G ************* 1. row ************* Status: 120325 10:54:08 INNODB MONITOR OUTPUT Per second averages calculated from the last 19 seconds SEMAPHORES OS WAIT ARRAY INFO: reservation count 22943, signal count 22947 Mutex spin waits 0, rounds 561745, OS waits 7664 RW-shared spins 24427, OS waits 12201; RW-excl spins 1461, OS waits 1277 TRANSACTIONS Trx id counter 0 119069326 Purge done for trx's n:o < 0 119069326 undo n:o < 0 0 History list length 41 Total number of lock structs in row lock hash table 0 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, process no 29093, OS thread id 1166043456 MySQL thread id 703985, query id 5807220 localhost root show innodb status FILE I/O I/O thread 0 state: waiting for i/o request (insert buffer thread) I/O thread 1 state: waiting for i/o request (log thread) I/O thread 2 state: waiting for i/o request (read thread) I/O thread 3 state: waiting for i/o request (write thread) Pending normal aio reads: 0, aio writes: 0, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 132777 OS file reads, 689086 OS file writes, 252010 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s INSERT BUFFER AND ADAPTIVE HASH INDEX Ibuf: size 1, free list len 366, seg size 368, 62237 inserts, 62237 merged recs, 52881 merges Hash table size 8850487, used cells 3698960, node heap has 7061 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s LOG Log sequence number 15 3415398745 Log flushed up to 15 3415398745 Last checkpoint at 15 3415398745 0 pending log writes, 0 pending chkp writes 218214 log i/o's done, 0.00 log i/o's/second BUFFER POOL AND MEMORY Total memory allocated 4798817080; in additional pool allocated 12342784 Buffer pool size 262144 Free buffers 101603 Database pages 153480 Modified db pages 0 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages read 151954, created 1526, written 494505 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout ROW OPERATIONS 0 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread process no. 29093, id 1162049856, state: waiting for server activity Number of rows inserted 77675, updated 85439, deleted 0, read 14377072495 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s END OF INNODB MONITOR OUTPUT 1 row in set, 1 warning (0.02 sec) read_buffer_size = 128M sort_buffer_size = 256M tmp_table_size = 1024M innodb_additional_mem_pool_size = 20M innodb_log_file_size=10M innodb_lock_wait_timeout=100 innodb_buffer_pool_size=4G join_buffer_size = 128M key_buffer_size = 1G can any one help me ?

  Read the article

• Nagios shell script cannot be executed

  - by MeinAccount

  I'm trying to monitor GitLab with nagios. I've created the following command definition and shell script but when checking the service I'm receiving the following e-mail. How can I solve this? The file is executable. [...] nagios : 3 incorrect password attempts ; TTY=unknown ; PWD=/ ; USER=git ; COMMAND=/bin/bash -c /var/lib/nagios/custom_plugins/check_gitlab.sh Command definition: define command { command_name custom_check_gitlab command_line /var/lib/nagios/custom_plugins/check_gitlab.sh } Shell script: #! /bin/sh # [...] RAILS_ENV="production" # Script variable names should be lower-case not to conflict with internal /bin/sh variables such as PATH, EDITOR or SHELL. app_root="/home/git/gitlab" app_user="git" unicorn_conf="$app_root/config/unicorn.rb" pid_path="$app_root/tmp/pids" socket_path="$app_root/tmp/sockets" web_server_pid_path="$pid_path/unicorn.pid" sidekiq_pid_path="$pid_path/sidekiq.pid" ### Here ends user configuration ### # Switch to the app_user if it is not he/she who is running the script. if [ "$USER" != "$app_user" ]; then sudo -u "$app_user" -H -i $0 "$@"; exit; fi # Switch to the gitlab path, if it fails exit with an error. if ! cd "$app_root" ; then echo "Failed to cd into $app_root, exiting!"; exit 1 fi ### Init Script functions check_pids(){ if ! mkdir -p "$pid_path"; then echo "Could not create the path $pid_path needed to store the pids." exit 1 fi # If there exists a file which should hold the value of the Unicorn pid: read it. if [ -f "$web_server_pid_path" ]; then wpid=$(cat "$web_server_pid_path") else wpid=0 fi if [ -f "$sidekiq_pid_path" ]; then spid=$(cat "$sidekiq_pid_path") else spid=0 fi } # Checks whether the different parts of the service are already running or not. check_status(){ check_pids # If the web server is running kill -0 $wpid returns true, or rather 0. # Checks of *_status should only check for == 0 or != 0, never anything else. if [ $wpid -ne 0 ]; then kill -0 "$wpid" 2>/dev/null web_status="$?" else web_status="-1" fi if [ $spid -ne 0 ]; then kill -0 "$spid" 2>/dev/null sidekiq_status="$?" else sidekiq_status="-1" fi } check_pids check_status if [ "$web_status" != "0" -a "$sidekiq_status" != "0" ]; then echo "GitLab is not running." exit 2 fi if [ "$web_status" != "0" ]; then printf "The GitLab Unicorn webserver is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$sidekiq_status" != "0" ]; then printf "The GitLab Sidekiq job dispatcher is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$web_status" = "0" -a "$sidekiq_status" = "0" ]; then printf "GitLab and all it's components are \033[32mup and running\033[0m.\n" exit 0 fi

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• Can't save screen resolution setting.

  - by Searock

  Hi, My screen resolution in windows and previous version of Ubuntu (9.04) was 1152 x 864. But in Ubuntu 10.04 it gives me an option of 1024 x 786 and 1360 x 786. I have some how managed to add 1152x684 resolution by using xrandr command. searock@searock-desktop:~$ cvt 1152 864 1152x864 59.96 Hz (CVT 1.00M3) hsync: 53.78 kHz; pclk: 81.75 MHz Modeline "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --addmode S-video 1152x864 xrandr: cannot find output "S-video" searock@searock-desktop:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 59.9 1152x864_60.00 (0x124) 81.0MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.3KHz v: height 864 start 867 end 871 total 897 clock 59.4Hz searock@searock-desktop:~$ xrandr --addmode VGA1 1152x864_60.00 But the problem is when ever I restart my computer I get this message. Could not apply the stored configuration for the monitors. Could not find a suitable configuration of screens. And then it comes back to 1024 x 786 My graphic card details : Intel(R) 82945G Express Chipset Family. Is there any way I can fix this once for all ? Thanks. Edit 1 : rumtscho has suggested me to modify xorg.conf file. But I am not sure what HorizSync means? is it Horizontal frequency ? My monitor model is Acer v173. Here's my specification. So what should be HorizSync and VertRefresh ? Edit 2 : I have edited my Xorg.conf file as follows : Section "Monitor" Identifier "Configured Monitor" HorizSync 30-80 VertRefresh 55-75 EndSection then I added the resolution and restarted my computer and still I am facing the same problem. Is there something that I am missing? Edit 3 : For now I have edited /etc/gdm/Init/Default(gdm startup scripts) to include following xrandr commands, just below line initctl -q emit login-session-start DISPLAY_MANAGER=gdm xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00<br/> xrandr -s 1152x864_60.00 This has solved my problem, but this commands have increased my computer's boot time. I think I will have to edit xorg file properly. Edit 4 : Instead of adding this files to gdm startup scripts I have created a shell script and added it to startup (System - Preference - Startup Applications) #!/bin/bash xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00 xrandr -s 1152x864_60.00 And don't forget to add execution rights. (Right Click - Properties - Permission - Allow executing file as program)

  Read the article

• Bluetooth not detecting any devices in Windows 7

  - by underDog

  My Lenovo ThinkPad E320 Laptop running Windows 7 64bit has recently been refusing to detect any Bluetooth devices. I have tried to connect, using 'Add devices' under 'devices and printers' to two different Bluetooth mice and my HTC Wildfire android (2.2.1) phone and none of them are detected in the 'Add a device' dialog. History - Bluetooth initially seemed OK when I first got this laptop. I was able to connect to and use my android phone as a remote with no issues. I got my first Bluetooth mouse, it paired, but after each restart, or even after sleeping, it would not 're-connect' (even though it was listed under Bluetooth devices and supposedly 'working'), and I would need to remove the device and add it again. A week or two ago it stopped working all together. It is not detected at all. I gave up on the mouse and bought another (Lenovo ThinkPad brand) only to find that it was not detected either. I subsequently tested my Android phone and discovered it would not detect either. One thing of note is under 'Devices and Printers' there is listed a 'HID Keyboard Device' which under properties is listed as a 'Bluetooth HID Device'. This was not previously there before this problem started. Each time I remove it, or uninstall it from Device Manager it will quickly re-install itself, even with all my Bluetooth devices switched off. My (Google and searching this site) research of this issue has not yielded any definitive answers. I have changed the setting under Device Manager - Bluetooth - Properties - Power Management - 'Allow the computer to turn off this device to save power' to off. I have attempted to un-install and re-install the Bluetooth hardware, including the 'remove drivers' option and downloading and running the Lenovo Bluetooth installer package (found @ http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014997). Bluetooth is turned on. All items under Bluetooth properties (Discovery and Connections) are checked. I have tried changing the batteries. I'm not sure what else I can try, apart from perhaps doing a fresh install of Windows. Any suggestions?

  Read the article

• Firefox can't establish a connection to the server at www.google.com

  - by Tom

  My home page in Firefox [v4.0] and Internet Explorer [v9.0.8112.16421, Update Versions RTM (KB982861)] is currently set to Google but when I depress the quick start icon to start up either browser, I am getting the following immediate results: Unable to connect (In Firefox) Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Internet Explorer cannot display the webpage What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. There might be a typing error in the address. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds: Click the Favorites button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages): Press Alt, click File, and then click Work Offline. Click the Favorites button, click History, and then click the page you want to view. Thankfully, I am able to use one browser that I have installed on my computer (Mathon v3.0.20.5000) to search online for technical assistance in this matter. I have seen several WinSock error issues mentioned; but, they are pointing to Windows XP and I am using Windows 7 Pro and remain uncertain whether anything identified as a fix for one OS will work in another. Things I've tried: HiJackThis Complete scan with Avira AntiVirus Premium. What am I overlooking? What should I do to address this problem?

  Read the article

• Rebasing a branch which is public

  - by Dror

  I'm failing to understand how to use git-rebase, and I consider the following example. Let's start a repository in ~/tmp/repo: $ git init Then add a file foo $ echo "hello world" > foo which is then added and committed: $ git add foo $ git commit -m "Added foo" Next, I started a remote repository. In ~/tmp/bare.git I ran $ git init --bare In order to link repo to bare.git I ran $ git remote add origin ../bare.git/ $ git push --set-upstream origin master Next, lets branch, add a file and set an upstream for the new branch b1: $ git checkout -b b1 $ echo "bar" > foo2 $ git add foo2 $ git commit -m "add foo2 in b1" $ git push --set-upstream origin b1 Now it is time to switch back to master and change something there: $ echo "change foo" > foo $ git commit -a -m "changed foo in master" $ git push At this point in master the file foo contain changed foo, while in b1 it is still hello world. Finally, I want to sync b1 with the progress made in master. $ git checkout b1 $ git fetch origin $ git rebase origin/master At this point git st returns: # On branch b1 # Your branch and 'origin/b1' have diverged, # and have 2 and 1 different commit each, respectively. # (use "git pull" to merge the remote branch into yours) # nothing to commit, working directory clean At this point the content of foo in the branch b1 is change foo as well. So what does this warning mean? I expected I should do a git push, git suggests to do git pull... According to this answer, this is more or less it, and in his comment @FrerichRaabe explicitly say that I don't need to do a pull. What's going on here? What is the danger, how should one proceed? How should the history be kept consistent? What is the interplay between the case described above and the following citation: Do not rebase commits that you have pushed to a public repository. taken from pro git book. I guess it is somehow related, and if not I would love to know why. What's the relation between the above scenario and the procedure I described in this post.

  Read the article

• Upgrading php from php 5.3 to 5.4 .7

  - by Takingsides

  So, quickly so to speak I have noticed this topic around, I have searched and there are plenty of solutions. However these solutions do not work for me, not only that but I'm intending to learn more about the Debian based OS. Questions I would like to know how to upgrade php5.3 to php 5.4.7 compiling it from source, myself without using a third-party ppa. Is the way (explained below) the correct way of configuring php5.4? I'm new to compiling from source. Set-up I run Ubuntu Server 12.04 64bit. I've currently got: PHP 5.3 MySQL-Server Apache2 Memcached The Problem So I initially installed php5.3 using apt-get. I now wish to upgrade the php 5.4 due to the advantage of traits in OOP and the struct with Arrays and all the other recent patches and such. Possible Solutions I've seen this ondrej/ppa repository, which I refuse to use, given the fact that it may work, but it's an unknown/untrusted source. ALso, i'm not learning how to administer from source, using configure, make and install accordingly. I've seen a solution compiling from source, which is essentially how I was hoping to go about it with some guidance. Conclusion So I didn't just expect to be spoon-fed, and I went out and did some manual reading and atleast started the ball rolling myself; this how far i've got. The first thing I did was su into root (to save the typing sudo all the darn time). $ sudo su The next thing I did was download the latest version of php (5.4.7) and extracted it's contents ready to configure before installing it. $ mkdir php5-new && cd !$ $ wget -O php-5.4.7.tar.bz2 http://php.net/get/php-5.4.7.tar.bz2/from/uk3.php.net/mirror $ bzip2 -d php-5.4.7.tar.bz2 $ tar xvf php-5.4.7.tar.gz $ cd php-5.4.7 $ ./configure --help Finally I decided to have a bash, I looked through the list of options and decided I needed to list ALL of the things I wanted to include in the configuration. $ ./configure --with-mysql --with-apache2 --with-libxml --with-openssl --with-zlib --with-bz2 --with-curl --with-dom --with-gd --with-imap --with-imap-ssl --with-mcrypt --with-mysqli --with-pdo-mysql --with-libxml --enable-ftp --enable-mbstring --enable-soap Finally, the results... When the configuration process had finished, it threw an error: configure: error: xml2-config not found. Please check your libxml2 installation.

  Read the article

• Mysql Servers for Attendance System

  - by foo

  I'm building an attendance system. There are about 20 places where people will check in and check out using Mifare 1K Card. It will use MySQL as the database. The system will display something like "#ID IN: 800AM" when the first time the user checks in and "#ID OUT: 400PM" when the user checks out. For this to work, all the databases need to be synchronized with each other all the times. For an example, if user A went to location #1 to check in but by the time he wants to return home, the server at location #1 went down, he needs to go to location #2 or the nearest server to check out. The server at location #2 should display '#ID OUT: 400PM" and not "#ID IN: 400PM" since he's already checked in. So, what should I use to ensure this idea will work? My main concern is with the network (other department manages it) which is very unpredictable. It just love to go down anytime it wants to. Update LOL, didn't realize my question is not clear, just noticed it when you guys pointed it out, sorry about that. My real question is, how can I configure my MySQL to be synchronized with each other (20 servers)? MySQL cluster ? (tried reading about it, but I'm not sure if it's the right thing to do) My current setup (first phase): Local database for each server OS: Slackware A main server that keeps track which staff is at which server A web based front end for the user to see their history (which connects to the server based on their records) Main Pros No worries about network problems since it is a local database Main Cons A user can only check in and out at the same server. Databases/Servers are not connected with each others. Have to add the user to each server if the users want to check in at different locations. Which means, if he wants to go to location A, he must be checked out from location A first and then check in at location B. The server at location B didn't know that the user has checked in before at A. By the way, I've already centralized my NTP to a local server. About the network, let's just say, I don't have the authority to make changes so that the network will be better. The network won't effect all 20 servers at once, usually, just a few of them for several times a week. If there are anything else you would like me to answer, please just ask.

  Read the article

• Computer freezes +/- 30 seconds, suspicion on SSD

  - by Robert vE

  My computer freezes for about 30 seconds, this happens occasionally. When it happens I can still move the mouse, sometimes even alternate between tabs in google chrome. If I try to open windows explorer nothing happens. Also chrome rapports "waiting for cache". It also happens in starcraft II, during which the sounds loops. I have made a Trace as this topic describes: How do I troubleshoot a Windows 7 freeze or slowness? Trace: https://docs.google.com/open?id=0B_VkKdh535p6NklhSDdBLURUMnc I have looked at it, but I couldn't figure it out. My system specs are: AMD Athlon X4 651 Asus Ati HD6670 ADATA SSD sp900 Asus f1a55 mainboard 4 GB crucial 1333 ram 500 watt atx ps I'm running Windows 7, fully updated. Any help is much appreciated. Update: I tried something before your reply that may have helped the problem. I don't know for sure if it has, it's too soon to tell. A bit of history first. I had problems installing win7 on my ssd from the start. In IDE mode it worked, but I had the same problems as above. AHCI was a total fail, with it on before install as well as turning it on after install (including tweaking register). I didn't bother installing the AMD chipset/AHCI as it was reported to have no TRIM function and thus make problems worse. Eventually I did install the AMD SMbus driver as the stability issues were driving me crazy. It worked, no more issues, until I installed some extra drivers and software. Audio/LAN/ASUS suite, I don’t see the relation, but somehow it screwed up my system again. As a last effort I posted here on this site. After which the thought occurred to me turn on AHCI again as by now I had all necessary drivers installed anyway. (plus all windows updates downloaded/installed in the meantime) I did and stability didn’t seem great the first few reboots, but eventually everything seemed to work great. I tried to play starcraft II – an almost guaranteed freeze before – and I had no problems. I’m basically crossing my fingers and hope the problem is gone for good. I still think it has something to do with my SSD. In my research into the problem I noticed a lot of these issues with sandforce 2281 firmware, the exact same firmware I have. People reported the same problem that I had, freezes. Additionally they reported that during a freeze the hdd light stayed on, I noticed after I read this that this happened with my computer as well. None of this is conclusive evidence that my SSD is really to fault, but it is suspicious. And why turning on AHCI would fix it I don’t know. Thank you Tom for taking a look, if the problem returns I will certainly do what you advised.

  Read the article

• Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

  - by Janar

  I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

  Read the article

• Why did Intel drop the Itanium?

  - by Cole Johnson

  I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

  Read the article

• Init script & the green [ OK ]

  - by Lord Loh.

  I am trying to install fast-cgi for nginx on an EC2 instance. I followed the steps explained here, but that is meant for Debian and does not work out of the box for a red-hat based system. I modified the script a bit to look like - #!/bin/bash ### BEGIN INIT INFO # Provides: php-fcgi # Required-Start: $nginx # Required-Stop: $nginx # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts php over fcgi # Description: starts php over fcgi ### END INIT INFO . /etc/rc.d/init.d/functions (( EUID )) && echo .You need to have root priviliges.. && exit 1 BIND=/tmp/php.socket USER=nginx PHP_FCGI_CHILDREN=15 PHP_FCGI_MAX_REQUESTS=1000 PHP_CGI=/usr/bin/php-cgi PHP_CGI_NAME=`basename $PHP_CGI` PHP_CGI_ARGS="- USER=$USER PATH=/usr/bin PHP_FCGI_CHILDREN=$PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=$PHP_FCGI_MAX_REQUESTS $PHP_CGI -b $BIND" RETVAL=0 start() { echo -n "Starting PHP FastCGI: " #ORIGINAL LINE #daemon $PHP_CGI --quiet --start --background --chuid "$USER" --exec /usr/bin/env -- $PHP_CGI_ARGS #MODIFIED LINE daemon --user=$USER $PHP_CGI -b $BIND& RETVAL=$? echo [ $RETVAL -eq 0 ] && touch /var/lock/subsys/php-fcgi #echo "$PHP_CGI_NAME." } stop() { echo -n "Stopping PHP FastCGI: " killall -q -w -u $USER $PHP_CGI RETVAL=$? echo "$PHP_CGI_NAME." rm /var/lock/subsys/php-fcgi } case "$1" in start) start ;; stop) stop ;; restart) stop start ;; *) echo "Usage: php-fastcgi {start|stop|restart}" exit 1 ;; esac exit $RETVAL The problem I have now is - service php-fcgi start keeps the shell blocked. If I run service php-fcgi start & and then ps aux, I see the php-cgi process running bound to the socket. I see the start command stop only when I execute service php-fcgi stop. How do I solve this blocking issue? I have tried adding an & at the end of the line spawning the daemon. But other scripts do not seem to be doing this. This is the most complicated script I am attempting to modify yet :-( How do I get the script to display the green [ OK ]? I checked scripts like httpd and saw that all they were doing was something as shown below. But I never see a green [ OK ] when I execute php-fcgi. I also discovered that putting echo_success with functions sourced displays the green [ OK ] but I do not see any other scripts in the /etc/rc.d/init.d/ executing echo_success or echo_failure. What have I got wrong? Also, How do i specify PHP_FCGI_CHILDREN with daemon? echo [ $RETVAL -eq 0 ] && touch /var/lock/subsys/

  Read the article

• Alienware m15x (older model) BSOD investigation

  - by Crishu

  A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

  Read the article

• git, egit, submodules, and symlinks -- how should shared sub-projects be handled in eclipse?

  - by Autophil

  Here's the situation. I have a few git projects with a directory structure layed out more or less like this: simpleproj app www admin demo lib model orm view model user blah ... storeproj app www about mobile fbapp lib model orm view model user message cart product merchant Each directory in "lib" contains a separate project, either created in-house or forked, all of which use git for source control. So I figured I should make them submodules of my projects, right? Well, we've been moving toward eclipse + egit, because some of our windows guys not used to a CLI need something they can use without being scared of screwing things up. Anyway, the problem is, egit doesn't support submodules. So, my solution has been a rather crude one involving symlinks... lets say my directory structure on my dev box is generally layed out like this: ~/projects/ bigproj .git app lib model (- ~/lib/model/src/) orm (- ~/lib/orm/src/) neatproj .git app lib view (- ~/lib/view/src/) oldproj .git app lib orm (- ~/lib/orm/src/) ~/lib/ model .git src README.md orm .git src COPYING view .git src ...the symlinks link inside of directory with the git repo, so eclipse doesn't get confused, and everything sort of works. On my machine, I can update the libs from anywhere and all projects will be updated (needing to be committed again of course). Each project stores a separate copy of the contents of the symlinked directories within "lib" -- but only when staged from within eclipse. After committing from eclipse and moving back to the CLI, git sees that a bunch of files have been removed and a few symlinks have been created. Of course this is acceptable also, probably more so than keeping a separate history of the libs for each project... but eclipse and CLI git obviously need to be on the same page so tons of files aren't vanishing and reappearing. So this brings me to my question. I'd like to know how to either: get eclipse+egit to see the symlinks as symlinks if git will somehow handle them properly*, or get the CLI git to treat them as non-symlinks. Or, if there's a better way to do this, I'm all ears. Hope this all made sense! :D Note: tried to tag this as git-submodules, but was not allowed :( * should I make them relative or absolute? Either way it's a mess. Also will symlinks will work on windows? i know there's something similar but you need a 3rd party tool to manage them AFAIK, i doubt these would translate well.

  Read the article

• 20GB+ worth of emails in my /home what is a better solution for that?

  - by Skinkie

  My email storage requirements are outgrowing anything reasonable with respect to local mail storage. As we speak 99% of my home partition is filled with personal mail in Thunderbirds mail dirs. Needless to say, this is just painful, badly searchable and as history has proven me that backups work, but Thunderbird is capable of loosing a lot of mail very easily. Currently I have an remote IMAPS server (Dovecot) running for my daily mail, accessible from anywhere, which from my own practice works efficiently up to about 1000 emails. Then some archive directories should be used to move mail around. I have been looking into DBMail, but I wonder if I make my case worse or better which such solution. None of the supported database employ string deduplication or string compression out of the box, so is this going to help me with 20GB+ mail? What about falling back to a plain old IMAP server? A filesystem like ZFS would support stuff like GZIP transparently, which could help. Could someone share their thoughts? The 20GB mostly consists of mailinglists, and normal mail. Not things like attachments. To add some clarifications; As we speak, my mail is not server side indexed at all - only my new mail arrives at a remote IMAP server. It is all local storage from former POP3 accounts, local mirrored Gmail and IMAP accounts. In my perspective it is not Thunderbird that sucks, its fileformat that sucks. Regarding the 1000 mails. On the road I am using Alpine and MobileMail, quite happy with both of them, but some management is required to actually manage the mail. Sieve helps a lot with that, but browing through 10.000 e-mails is not fun, especially not on a mobile client. I am quite happy with Dovecot, never had any issues with it. I just wonder if this is the way to go. Or if there are any other better solutions. What my question is: what is the best practice solution that allows 20GB+ mails and is -on demand remotely accessible, easy to backup and archive worthy. It doesn't need to be available 24x7. The final approach I took was installing a local IMAP server (Dovecot), configured it for being my archive, using the following guide: http://en.gentoo-wiki.com/wiki/Dovecot/InstallThunderbird

  Read the article

• git private server error: "Permission denied (publickey)."

  - by goddfree

  I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

  Read the article

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• SIGINT and SIGTSTP ignored by most common applications

  - by Vašek Potocek

  After the last upgrade to my Fedora, a strange behaviour started occurring in X terminal applications. I can't seem to stop any process using Ctrl+C, it just results in printing ^C to the console. Similarly, Ctrl+Z prints ^Z and the process goes on. Both work well in non-graphical virtual consoles. I checked stty -a and it seems perfectly normal: speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke This is independent of the terminal (gnome-terminal, XFCE4 terminal, xterm). I later noticed that it may not be caused by the terminal at all: INT or TSTP sent directly to the respective process are ignored, too. This comprises various applications I used to terminate using Ctrl+C on a regular basis (and which often don't have any better means of exiting): cat, find, tail -f, java, ping, mplayer when stuck on a broken file... Even bash ignores Ctrl+C when I want to break a command line I have been entering and then changed my mind (no ^C is printed in this case). I need to delete it character by character (of which there may be hundreds if filename completion has been used) or intentionally run the unwanted command. Strangely enough, vim does recognize Ctrl+C—just to say its "use :quit", of course. This is extremely annoying and prevents me from working efficiently. Everything had been working until lately, maybe a week ago or so. I can not find any possible causes in Google, perhaps I'm trying wrong search terms or misidentifying the main problem. What could be it and how could I revert the standard behaviour, please? Update Ctrl+Z works sometimes. It seems that in the very first terminal I launch after logging in it stops the running command but stops working after that.

  Read the article

• web services access not being reached thru the web browser [closed]

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• IE9 Error: There was a pr?blem sending the command to the program

  - by HK1

  I'm working on a new/fresh Windows 7 32bit machine that now has IE9 installed. The user is using the Dell Stardock application as his primary "desktop" (all his links there). When we place an internet link there and click on it we get the following error message: There was a problem sending the command to the program. To me this indicates that IE9 is having trouble going to the website we want to go to, which should get passed as a parameter to the browser when it opens. I don't think this is a StarDock/ObjectDock problem because we also have some other problems with internet links. For example, we cannot move an internet link from the Desktop to the Quick Launch on the task bar. When we do try, it forces us to put the link with the IE icon as part of the IE menu instead of allowing us to have a shortcut there as it's own entry. I should mention however, that links on the desktop and in the taskbar do work as we expect them too (without showing the above error message). It appears that this problem started after installing Windows Updates. Since we installed a whole bunch of updates at once I have no idea which one caused the problem. I did have Google Chrome installed but I uninstalled it since the user wants to use IE. The problem started before I uninstalled Chrome. I also reset the browser settings on IE9. It didn't help. Next I uninstalled IE9 which took me back to IE8. This actually did resolve the problem but the problem came back as soon as I installed IE9 again. We have Verizon Internet Security installed. It's actually a McAfee product rebranded to look like Verizon. I'm not real crazy over this software but the customer has a subscription so we're not planning to change it. I have no reason to believe that this is causing the problem and yet I know that security software is often to blame for strange issues. I've looked at the registry settings for the following keys and everything appears to be ok for every single one of them: HKEY_CLASSES_ROOT\.htm HKEY_CLASSES_ROOT\.html HKEY_CLASSES_ROOT\http\shell\open\command HKEY_CLASSES_ROOT\http\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\https\shell\open\command HKEY_CLASSES_ROOT\https\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\htmlfile\shell\open\command HKEY_CLASSES_ROOT\Microsoft.Website\Shell\Open\Command Edit1: I've found two potential solutions but I won't be able to try them until tomorrow. One is to disable the "Windows Font Cache" service. Another is to clear IE cache and browsing history. I won't be able to try out either solution until tomorrow since this is a remote client's machine. I see there are lots of other suggestions online but if you take the time to read them through you'll see that the other suggestions didn't fix the problem.

  Read the article

• Repair corrupt hard disk on Mac without install CD

  - by Sarah

  The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

  Read the article

• bluetooth connection using pybluez

  - by srj0408

  I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

  Read the article

• Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

  - by cappie

  I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I protect my calling-bill now is by using 32 character passwords, but I would much rather have a way to protect The firewall script I'm currently using is stated below, however, without the established connection firewall rule (mentioned rule #1), I cannot receive incoming audio from the target during outgoing calls: #!/bin/bash # first, clean up! iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD DROP # we're not a router iptables -P OUTPUT ACCEPT # don't allow invalid connections iptables -A INPUT -m state --state INVALID -j DROP # always allow connections that are already set up (MENTIONED RULE #1) iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # always accept ICMP iptables -A INPUT -p icmp -j ACCEPT # always accept traffic on these ports #iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT # always allow DNS traffic iptables -A INPUT -p udp --sport 53 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT # allow return traffic to the PBX iptables -A INPUT -p udp -m udp --dport 50000:65536 -j ACCEPT iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT iptables -A INPUT -p udp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -p tcp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -m multiport -p udp --dports 10000:20000 iptables -A INPUT -m multiport -p tcp --dports 10000:20000 # IP addresses of the office iptables -A INPUT -s 95.XXX.XXX.XXX/32 -j ACCEPT # accept everything from the trunk IP's iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT # accept everything on localhost iptables -A INPUT -i lo -j ACCEPT # accept all outgoing traffic iptables -A OUTPUT -j ACCEPT # DROP everything else #iptables -A INPUT -j DROP I would like to know what firewall rule I'm missing for this all to work.. There is so little documentation on which ports (incoming and outgoing) asterisk actually needs.. (return ports included). Are there any firewall/iptables specialists here that see major problems with this firewall script? It's so frustrating not being able to find a simple firewall solution that enabled me to have a PBX running somewhere on the Internet which is firewalled in such a way that it can ONLY allows connections from and to the office, the DNS servers and the trunk(s) (and only support SSH (port 22) and ICMP traffic for the outside world). Hopefully, using this question, we can solve this problem once and for all.

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >