Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 236/346 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• High load on a nagios server -- How many service checks for a nagios server is too many?

  - by Josh

  I have a nagios server running Ubuntu with a 2.0 GHz Intel Processor, a RAID10 array, and 400 MB of RAM. It monitors a total of 42 services across 8 hosts, most of which are checked using the check_http plugin even 5 minutes, some every minute. Recently the load on the nagios server has been above 4, often as high as 6. The server also runs cacti, gathering statistics every minute for 6 hosts. I wonder, how many services should hardware like this be able to handle? Is the load so high because I am pushing the limits of the hardware, or should this hardware be able to handle 42 service checks plus cacti? If the hardware is inadequate, should I look to add more RAM, more cores, or faster cores? What hardware / service checks are others running?

  Read the article

• Video encoding is very slow on Amazon EC2 instance

  - by Timka

  We are using Amazon EC2 m1.xlarge instance for video re-encoding and it looks like the actual encoding process takes a very long time. For an average 250mb video file it takes about an hour to encode. Intance: m1.xlarge (Xeon E5645 x 15gb ram) Windows Server 2008 R2 64-bit AviSynth version 2.5 (32bit) + ffms2 plugin (FFmpegSource 1.21) FFmpeg SVN-r13712 libavutil 3213056 libavcodec 3356930 libavformat 3411456 libavdevice 3407872 Number of parallel jobs is 3 Average CPU utilization ~96% Update#1 Source video: mp4/h.264 Parameters for ffmpeg: --enable-memalign-hack --enable-avisynth --enable-libxvid --enable-libx264 + --enable-libgsm --enable-libfaac --enable-libfaad --enable-liba52 + --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-pthreads + --enable-swscale --enable-gpl Video files encoded to mp4/h.264 with the following extra command line options: -threads 0 -coder 0 -bf 0 -refs 1 -level 30 -maxrate 10000000 -bufsize 10000000

  Read the article

• Is it safe to use consumer MLC SSDs in a server?

  - by Zypher

  We (and by we I mean Jeff) are looking into the possibility of using Consumer MLC SSD disks in our backup data center. We want to try to keep costs down and usable space up - so the Intel X25-E's are pretty much out at about 700$ each and 64GB of capacity. What we are thinking of doing is to buy some of the lower end SSD's that offer more capacity at a lower price point. My boss doesn't think spending about 5k for disks in servers running out of the backup data center is worth the investment. Just how dangerous of an approach is this and what can be done to mitigate these dangers?

  Read the article

• My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

  - by Anders

  Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

  Read the article

• monitoring load on AWS EC2

  - by hortitude

  I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

  Read the article

• What is fastest way to backup a disk image over LAN?

  - by David Balažic

  Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• Tomcat access logs - are failed requests included?

  - by Maxim Eliseev

  We have a RESTful web service (Java, hosted in Tomcat on Ubuntu on Amazon EC2). From time to time it fails (not every week). When it fails, Java CPU consumption goes to 100% and it takes all available memory. It does not finish by itself. I have to restart the server. There is nothing suspicious in Tomcat access logs. I guess one of our users could submit a very "heavy" request which brought the server down. Is it possible this request is not in Tomcat logs since it never finished?

  Read the article

• Need help upgrading MacBookPro3,1 RAM to 4GB.

  - by Fantomas

  My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

  Read the article

• Intuitive view of what's using the hard drive so much on Windows 7?

  - by Aren Cambre

  Sometimes my hard drive usage is near 100%, and I have no idea what is causing it. Are there any utilities that can help diagnose excessive hard drive usage and have as intuitive of an interface as Task Manager's Processes tab, which I can sort by CPU usage? I am aware of using procmon, of adding columns to Task Manager's Processes tab like I/O Read Bytes and I/O Write Bytes, and using Resource Monitor's Disk tab. Too often, these don't give me useful information or clearly identify a single process that is hogging the disk.

  Read the article

• 250k connections for comet with node.js

  - by Nenad

  How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

  Read the article

• Windows 7 clean install, freezes when starting programs

  - by madmaze

  Hello Everyone, I have a problem on a brand new Windows 7 Lenovo T510 intel I5/4gb ram. When I got the Laptop, right off the bat i noticed that it would freeze up often on th most simple tasks. After a while I got fed up and reinstalled. All that is installed currently is AVG/Firefox/Office. I Rebooted after installing those things and when I try to open Firefox it freezes just trying to open. Ive tried a few other things and it freezes all the time. Any Ideas what it could be?

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• SQL server availability issue: large query stops other connections from connecting

  - by Carlos

  I've got a high-spec (multicore, RAID) server running MS SQL 2008, with several databases on it. I have a low throughput process that periodically needs a small amount of information from one of the DBs, and the code seems to work fine. However, sometimes when one of my colleagues does a huge query against one of the other DBs, I see full CPU usage on the machine, and connections from my app time out. Why does this happen? I would have thought the many cores and harddisks would somehow (together with cleverly written DB server) be able to keep at least some of the resources free for other apps? I'm pretty sure he doesn't use multiple connections for his query. What can I do to prevent this?

  Read the article

• recommendations for a lightweight linux distribution for a test server

  - by Jack

  I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

  Read the article

• How do I pick a motherboard?

  - by EpsilonVector

  When building your own computer one part was always a mystery to me: the motherboard. Picking a CPU/GPU/memory is easy- you just figure out where the various chips are in the low end to high end scale, do a little market research on what current games demand, and pick the parts from their respective continuums of low-to-high-end models. A mother board is more complicated though. Its features are not as obvious as "this motherboard is faster than that motherboard". Now you need to deal with part compatibilities, bus speeds, maybe power management stuff, etc. I'm interested in a short guide for selecting a motherboard, especially- what pitfalls to avoid (for example, can bus speed become a bottleneck?). To clarify: I'm not looking for motherboard recommendations. I'm looking for guidance regarding how to evaluate the fitness of a motherboard given the rest of the computer parts.

  Read the article

• Long wait until POST...

  - by Wesley

  Here are the specs to put things into context: ECS P4VXASD2+ (V5.0) motherboard Intel Pentium 4 Northwood 2.8 GHz (512 KB L2, 533 MHz FSB) 2x 512 MB PC2100 DDR266 RAM 128 MB NVIDIA GeForce FX 5200 AGP WD Caviar SE 80 GB IDE HDD Gigabyte CD-RW drive OKIA 300W ATX PSU So, everytime I try to boot up this computer, it takes at least 10-15 seconds before it will POST. All my other machines will post within 1-2 seconds, but this one takes a particularly long time. I've read suggestions from a Google search to swap the CMOS battery, check BIOS settings, and double check CMOS jumper. Still after follow those, it takes a while to POST. What else could be causing a long delay before POSTing?

  Read the article

• ASA Slow IPSec Performance

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremly poor performance when traffic passes over the VPN. CPU on the device is 13%, Memory at 408 MB, and active VPN sessions 2 so the load on the device is particularly low. Screenshot of wireshark file transfer between the two hosts over the VPN: The large amount of Header checksum failures is alarming, but I am not sure what to check now. I perf is showing around 4-5 Mbit/sec with differing TCP window sizes. Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• Outlook Express hangs when selecting multiple emails

  - by Javier Badia

  I'm using Outlook Express (6, I think) on Windows XP. Lately, it has been hanging. Sometimes this happens at startup (right after the main window with all the panes loads) and sometimes when selecting many emails (sometimes as low as three emails at once, sometimes at ten, it's not a fixed number). When this happens, msimn.exe starts to use 98-100% CPU and RAM usage shoots up very quickly, reaching hundreds of megabytes in half a minute. The message pane goes gray instead of showing the message contents. As I said, this sometimes happens right after the main window loads, sometimes when selecting many emails at once. I tried backing up everything, deleting the identities, creating a new one and restoring, but this still happens.

  Read the article

• Problem with screen redrawing at DOS app in VmWare Player

  - by MicTech

  I have very old DOS Application (CadSoft Eagle - PCB Designer) and I want to work with it on my workstation with Windows 7. Then I install Windows 98 and that software into VmWare Player. But that software has serious problem with redrawing screen. It's very slow in comparison with my Intel Celeron 333MHz with Windows 98. I have same problem if I try to use DOSBox on Windows XP (same Celeron 333MHz). I also trying run this application directly on Windows XP (same Celeron 333MHz) with compatibility mod set to "Windows 98", but I get "(0Dh): General Protection Fault". Can someone give me good advice how I solve that?

  Read the article

• Printing documents on HP printer very slow

  - by maxim

  I have a strange problem with HP drivers. I have configured a HP printer 2025dn with LAN connection, on 3 pc, using the cd rom of HP driver. All works well, but sometimes for certain documents the time for printing is very slow and long. I observe during this situation, in task manager, a process called rundll32.exe loads CPU at 100%. If I kill that process the printer starts printing fast the document in the queue. I wondering the reason of this strange behaviour.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >