Search Results

Search found 6988 results on 280 pages for 'if statement'.

Page 237/280 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

  • SQL: select rows with the same order as IN clause

    - by Andrea3000
    I know that this question has been asked several times and I've read all the answer but none of them seem to completely solve my problem. I'm switching from a mySQL database to a MS Access database with MS SQL. In both of the case I use a php script to connect to the database and perform SQL queries. I need to find a suitable replacement for a query I used to perform on mySQL. I want to: perform a first query and order records alphabetically based on one of the columns construct a list of IDs which reflects the previous alphabetical order perform a second query with the IN clause applied with the IDs' list and ordered by this list. In mySQL I used to perform the last query this way: SELECT name FROM users WHERE id IN ($name_ids) ORDER BY FIND_IN_SET(id,'$name_ids') Since FIND_IN_SET is available only in mySQL and CHARINDEX and PATINDEX are not available from my php script, how can I achieve this? I know that I could write something like: SELECT name FROM users WHERE id IN ($name_ids) ORDER BY CASE id WHEN ... THEN 1 WHEN ... THEN 2 WHEN ... THEN 3 WHEN ... THEN 4 END but you have to consider that: IDs' list has variable length and elements because it depends on the first query that list can easily contains thousands of elements Have you got any hint on this? Is there a way to programmatically construct the ORDER BY CASE ... WHEN ... statement? Is there a better approach since my list of IDs can be big?

    Read the article

  • Is there a supplementary guide/answer key for ruby koans?

    - by corroded
    I have recently tried sharpening my rails skills with this tool: http://github.com/edgecase/ruby_koans but I am having trouble passing some tests. Also I am not sure if I'm doing some things correctly since the objective is just to pass the test, there are a lot of ways in passing it and I may be doing something that isn't up to standards. Is there a way to confirm if I'm doing things right? a specific example: in about_nil, def test_nil_is_an_object assert_equal __, nil.is_a?(Object), "Unlike NULL in other languages" end so is it telling me to check if that second clause is equal to an object(so i can say nil is an object) or just put assert_equal true, nil.is_a?(Object) because the statement is true? and the next test: def test_you_dont_get_null_pointer_errors_when_calling_methods_on_nil # What happens when you call a method that doesn't exist. The # following begin/rescue/end code block captures the exception and # make some assertions about it. begin nil.some_method_nil_doesnt_know_about rescue Exception => ex # What exception has been caught? assert_equal __, ex.class # What message was attached to the exception? # (HINT: replace __ with part of the error message.) assert_match(/__/, ex.message) end end Im guessing I should put a "No method error" string in the assert_match, but what about the assert_equal?

    Read the article

  • Crash generated during destruction of hash_map

    - by Alien01
    I am using hash_map in application as typedef hash_map<DWORD,CComPtr<IInterfaceXX>> MapDword2Interface; In main application I am using static instance of this map static MapDword2Interface m_mapDword2Interface; I have got one crash dump from one of the client machines which point to the crash in clearing this map I opened that crash dump and here is assembly during debugging > call std::list<std::pair<unsigned long const ,ATL::CComPtr<IInterfaceXX> >,std::allocator<std::pair<unsigned long const ,ATL::CComPtr<IInterfaceXX> > > >::clear > mov eax,dword ptr [CMainApp::m_mapDword2Interface+8 (49XXXXX)] Here is code where crash dump is pointing. Below code is from stl:list file void clear() { // erase all #if _HAS_ITERATOR_DEBUGGING this->_Orphan_ptr(*this, 0); #endif /* _HAS_ITERATOR_DEBUGGING */ _Nodeptr _Pnext; _Nodeptr _Pnode = _Nextnode(_Myhead); _Nextnode(_Myhead) = _Myhead; _Prevnode(_Myhead) = _Myhead; _Mysize = 0; for (; _Pnode != _Myhead; _Pnode = _Pnext) { // delete an element _Pnext = _Nextnode(_Pnode); this->_Alnod.destroy(_Pnode); this->_Alnod.deallocate(_Pnode, 1); } } Crash is pointing to the this->_Alnod.destroy(_Pnode); statement in above code. I am not able to guess it, what could be reason. Any ideas??? How can I make sure, even is there is something wrong with the map , it should not crash?

    Read the article

  • Using a Context Menu to delete from a SQLite database in Android

    - by LordSnoutimus
    Hi, I have created a list view that displays the names and dates of items stored in a SQLite database, now I want to use a Context Menu to modify these items stored in the database such as edit the name, delete, and view. This is the code for the list view: public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.listview); SQLiteDatabase myDB = null; myDB = this.openOrCreateDatabase(MY_DB_NAME, MODE_PRIVATE, null); Cursor cur = myDB.rawQuery("SELECT _id, trackname, tracktime" + " FROM " + MY_DB_TABLE, null); ListAdapter adapter = new SimpleCursorAdapter(this, R.layout.listview, cur, new String[] { Constants.TRACK_NAME, Constants.TRACK_TIME}, new int[] { R.id.text1, R.id.text2}); ListView list = (ListView)findViewById(R.id.list); list.setAdapter(adapter); registerForContextMenu(list); } and the Context Menu... public void onCreateContextMenu(ContextMenu menu, View v, ContextMenuInfo menuInfo) { super.onCreateContextMenu(menu, v, menuInfo); menu.setHeaderTitle("Track Options"); menu.add(0, CHANGE_NAME, 0, "Change name"); menu.add(0, VIEW_TRACK, 0, "View track"); menu.add(0, SEND_TRACK, 0, "Send track"); menu.add(0, DELETE_TRACK, 0, "Delete track"); } I have used a Switch statement to control the menu items.. public boolean onContextItemSelected(MenuItem item) { switch (item.getItemId()){ case CHANGE_NAME: changename(); return true; case DELETE_TRACK: deletetrack(); return true; default: return super.onContextItemSelected(item); } So how would I go ahead and map the deletetrack(); method to find the ID of the track stored in the database to the item that has been selected in the list view?

    Read the article

  • A good solution for displaying galleries with lytebox and php

    - by Johann
    Hello I have thought for a while over an issue with the loading of images on a website-solution that I have programmed (For fun and the experience) The programming language used is PHP with MYSQL as the database language It also uses javascript, but not extensively I have recently realized that the engine I programmed, while it has it's smart solutions also carry a lot of flaws and redundant code. I have therefore decided to make a new one, now incorporating what I know, but didn't when I started the previous project. For the new system, there will be an option to add galleries to a site, and upload images to it. I have used the javascript image viewer Lytebox before. The screen goes dark and an image appears with a "Previous" and "next" button to view the other images. The problem is that I used groups with lytebox and the images themselves, resized as thumbs. This causes lytebox to work only when all the images have loaded. If you click a link before that, the image is shown as if you right click and choose "Show image" Information about these images is parsed from a database using a while statement with a counter that goes from 0 to sizeof() I'm thinking it probably isn't a good idea to have the images as the thumbs, even if you restrict the upload size. Likewise, adding thumbs at upload also seems like a hassle. It would be practical if the thumbs didn't show up before they were fully loaded. Has anyone got any good tips. Any help would be appreciated. Johann

    Read the article

  • reload parent from within iframe

    - by Lauren
    I can't seem to reload the parent page from within an iframe... I've looked around at similar questions' answers but nothing has worked so far. The iframe I'm working with is here http://www.avaline.com/ R3000_3 once you log in, then hit the "order sample" button, and then hit "here" where it says "Your Third Party Shipper Numbers (To enter one, click here.)". I tried using javascript statements window.top.location.reload(),window.parent.location.reload(),window.parent.location.href=window.parent.location.href but none of those worked in FF 3.6 so I didn't move on to the other browsers although I am shooting for a cross-browser solution. I put the one-line javascript statements inside setTimeout("statement",2000) so people could read the content of the iframe (You have updated your shipper number(s). The page should refresh automatically. If not, please refresh and return to "order sample.") before the redirect happens, but that shouldn't affect the execution of the statements... I wish I could test and debug the statements with the Firebug console from within the Iframe but there doesn't seem to be any great way to test this out.

    Read the article

  • Can't seem to sign AWS Cloud Front URL properly

    - by Joe Corkery
    Hi everybody, I found a lot of detailed examples online on how to sign an Amazon CloudFront URL for private content. Unfortunately, whenever I implement these examples my URL doesn't seem to work. The resource path is correct because I can download the file when it is set for world read, but the URL doesn't work when set just for authorized users. The PHP code I am using is below. If anybody has any insights as to what I might be doing wrong (I'm guessing it is something obvious that I am just not seeing right now), it would be greatly appreciated. function urlCloudFront($resource) { $AWS_CF_KEY = 'APKA...'; $priv_key = file_get_contents(path_to_pem_file); $pkeyid = openssl_get_privatekey($priv_key); $expires = strtotime("+ 3 hours"); $policy_str = '{"Statement":[{"Resource":"'.$resource.'","Condition":{"DateLessThan":{"AWS:EpochTime":'.$expires.'}}}]}'; $policy_str = trim( preg_replace( '/\s+/', '', $policy_str ) ); $res = openssl_sign($policy_str, $signature, $pkeyid, OPENSSL_ALGO_SHA1); $signature_base64 = (base64_encode($signature)); $repl = array('+' => '-','=' => '_','/' => '~'); $signature_base64 = strtr($signature_base64,$repl); $url = $resource . '?Expires=' .$expires. '&Signature=' . $signature_base64 . '&Key-Pair-Id='. $AWS_CF_KEY; print '<p><A href="' .$url. '">Download VIDA (CloudFrount)</A>'; } urlCloudFront("http://mydistcloud.cloudfront.net/mydir/myfile.tar.gz"); Thanks.

    Read the article

  • iPhone SpeakHere example produces different number of samples

    - by pion
    I am looking at the SpeakHere example and added the following: // Overriding the output audio route UInt32 audioRouteOverride = kAudioSessionOverrideAudioRoute_Speaker; AudioSessionSetProperty(kAudioSessionProperty_OverrideAudioRoute, sizeof (audioRouteOverride), &audioRouteOverride); assert(status == noErr); // Changing the default output route. The new output route remains in effect unless you change the audio session category. This option is available starting in iPhone OS 3.1. UInt32 doChangeDefaultRoute = 1; status = AudioSessionSetProperty(kAudioSessionProperty_OverrideCategoryDefaultToSpeaker, sizeof(doChangeDefaultRoute), &doChangeDefaultRoute); assert(status == noErr); // Enable Bluetooth. See audioRouteOverride & doChangeDefaultRoute above // http://developer.apple.com/iphone/library/documentation/Audio/Conceptual/AudioSessionProgrammingGuide/Cookbook/Cookbook.html#//apple_ref/doc/uid/TP40007875-CH6-SW2 UInt32 allowBluetoothInput = 1; status = AudioSessionSetProperty(kAudioSessionProperty_OverrideCategoryEnableBluetoothInput, sizeof(allowBluetoothInput), &allowBluetoothInput); assert(status == noErr); Also, void AQRecorder::handleInputBufferCallback(void *aqData, ... ... if (inNumPackets > 0) { NSLog(@"Number of samples = %d", inBuffer->mAudioDataByteSize/2); // print out the number of sample status = AudioFileWritePackets(aqr->mAudioFile, FALSE, inBuffer->mAudioDataByteSize, inPacketDesc, aqr->mCurrentPacket, &inNumPackets, inBuffer->mAudioData); assert(status == noErr); aqr->mCurrentPacket += inNumPackets; } ... Notice the "NSLog(@"Number of samples = %d", inBuffer-mAudioDataByteSize/2); // print out the number of sample" statement above. I am using iPhone SDK 3.1.3. I got the following results The number of samples is around 44,100 on Simulator The number of samples is around 22,000 on iPhone The number of samples is around 4,000 on iPhone using Jawbone Bluetooth I am new on this. Why did itproduce different number of samples? Thanks in advance for your help.

    Read the article

  • Hibernate 3.5.0 causes extreme performance problems

    - by user303396
    I've recently updated from hibernate 3.3.1.GA to hibernate 3.5.0 and I'm having a lot of performance issues. As a test, I added around 8000 entities to my DB (which in turn cause other entities to be saved). These entities are saved in batches of 20 so that the transactions aren't too large for performance reasons. When using hibernate 3.3.1.GA all 8000 entities get saved in about 3 minutes. When using hibernate 3.5.0 it starts out slower than with hibernate 3.3.1. But it gets slower and slower. At around 4,000 entities, it sometimes takes 5 minutes just to save a batch of 20. If I then go to a mysql console and manually type in an insert statement from the mysql general query log, half of them run perfect in 0.00 seconds. And half of them take a long time (maybe 40 seconds) or timeout with "ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction" from MySQL. Has something changed in hibernate's transaction management in version 3.5.0 that I should be aware of? The ONLY thing I changed to experience these unusable performance issues is replace the following hibernate 3.3.1.GA jar files: com.springsource.org.hibernate-3.3.1.GA.jar, com.springsource.org.hibernate.annotations-3.4.0.GA.jar, com.springsource.org.hibernate.annotations.common-3.3.0.ga.jar, com.springsource.javassist-3.3.0.ga.jar with the new hibernate 3.5.0 release hibernate3.jar and javassist-3.9.0.GA.jar. Thanks.

    Read the article

  • Little help with some (simple) Javascript code

    - by lerac
    I'm a newb when it comes to javascript. Perhaps somebody could help me with this. I assume it is not very complicated. This is what I would like: <SCRIPT type=text/javascript> var StandardURL = "http://site/Lists/test/AllItems.aspx"; </script> <SCRIPT type=text/javascript> var FilterURL = "http://site/Lists/test//AllItems.aspx?FilterField1=Judge&FilterValue1="; </script> var DynamicURL = FilterURL + DynamicUserInf (no space between it should be like one url link), dynamicuserinf contains different value depending on the user that is logged in no need to worry what is in it. It already contains a value befor this runs Get current URL in [var CurrentURL] <script language="JavaScript" type="text/javascript"> if (CurrentURL == StandardURL) { location.href= (DynamicURL);} </script> ElSE do nothing (i assume this is not neccarry with only one if statement) Hopefully not much of a mess.

    Read the article

  • Validations for a has_many/belongs_to relationship

    - by Craig Walker
    I have a Recipe model which has_many Ingredients (which in turn belongs_to Recipe). I want Ingredient to be existent dependent on Recipe; an Ingredient should never exist without a Recipe. I'm trying to enforce the presence of a valid Recipe ID in the Ingredient. I've been doing this with a validates :recipe, :presence => true (Rails 3) statement in Ingredient. This works fine if I save the Recipe before adding an Ingredient to it's ingredients collection. However, if I don't have explicit control over the saving (such as when I'm creating a Recipe and its Ingredients from a nested form) then I get an error: Ingredients recipe can't be blank I can get around this simply by dropping the presence validation on Ingredient.recipe. However, I don't particularly like this, as it means I'm working without a safety net. What is the best way to enforce existence-dependence in Rails? Things I'm considering (please comment on the wisdom of each): Adding a not-null constraint on the ingredients.recipe_id database column, and letting the database do the checking for me. A custom validation that somehow checks whether the Ingredient is in an unsaved recipe's ingredient collection (and thus can't have a recipe_id but is still considered valid).

    Read the article

  • Trouble decoding JSON string with PHP

    - by Anthony
    I'm trying to send an array of objects from JS to PHP using JSON. I have an array of players as follows: var player; var players = new Array(); //loop for number of players player = new Object(); player.id = theID; players[i] = player; Then my AJAX call looks like this: JSONplayers = JSON.stringify(players); $.ajax({ type: "POST", url: "php/ajax_send_players.php", data: { "players" : JSONplayers } On the PHP side the decode function looks like this $players = $_REQUEST['players']; echo var_dump($players); $players = json_decode($players); echo 'players: ' .$players. '--'. $players[0] . '--'. $players[0]->id; Debugging in chrome, the JSON players var looks like this before it is sent: JSONplayers: "[{"id":"Percipient"},{"id":"4"}]" And when I vardump in PHP it looks OK, giving this: string(40) "[{\"id\":\"Percipient\"},{\"id\":\"4\"}]" But I can't access the PHP array, and the echo statement about starting with players: outputs this: players: ---- Nothing across the board...maybe it has something to do with the \'s in the array, I am new to this and might be missing something very simple. Any help would be greatly appreciated. note I've also tried json_decode($players, true) to get it as an assoc array but get similar results.

    Read the article

  • Does cout need to be terminated with a semicolon ?

    - by Philippe Harewood
    I am reading Bjarne Stroustrup's Programming : Principles and Practice Using C++ In the drill section for Chapter 2 it talks about various ways to look at typing errors when compiling the hello_world program #include "std_lib_facilities.h" int main() //C++ programs start by executing the function main { cout << "Hello, World!\n", // output "Hello, World!" keep_window_open(); // wait for a character to be entered return 0; } In particular this section asks: Think of at least five more errors you might have made typing in your program (e.g. forget keep_window_open(), leave the Caps Lock key on while typing a word, or type a comma instead of a semicolon) and try each to see what happens when you try to compile and run those versions. For the cout line, you can see that there is a comma instead of a semicolon. This compiles and runs (for me). Is it making an assumption ( like in the javascript question: Why use semicolon? ) that the statement has been terminated ? Because when I try for keep_terminal_open(); the compiler informs me of the semicolon exclusion.

    Read the article

  • Problem using SQLDataReader with Sybase ASE

    - by John K.
    We're developing a reporting application that uses asp.net-mvc (.net 4). We connect through DDTEK.Sybase middleware to a Sybase ASE 12.5 database. We're having a problem pulling data into a datareader (from a stored procedure). The stored procedure computes values (approximately 50 columns) by doing sums, counts, and calling other stored procedures. The problem we're experiencing is... certain (maybe 5% of the columns) come back with NULL or 0. If we debug and copy the SQL statement being used for the datareader and run it inside another SQL tool we get all valid values for all columns. conn = new SybaseConnection { ConnectionString = ConfigurationManager.ConnectionStrings[ConnectStringName].ToString() }; conn.Open(); cmd = new SybaseCommand { CommandTimeout = cmdTimeout, Connection = conn, CommandText = mainSql }; reader = cmd.ExecuteReader(); // AT THIS POINT IMMEDIATELY AFTER THE EXECUTEREADER COMMAND // THE READER CONTAINS THE BAD (NULL OR 0) DATA FOR THESE COLUMNS. DataTable schemaTable = reader.GetSchemaTable(); // AT THIS POINT WE CAN VIEW THE DATATABLE FOR THE SCHEMA AND IT APPEARS CORRECT // THE COLUMNS THAT DON'T WORK HAVE SPECIFICATIONS IDENTICAL TO THE COLUMNS THAT DO WORK Has anyone had problems like this using Sybase and ADO? Thanks, John K.

    Read the article

  • Howto use predicates in LINQ to Entities for Entity Framework objects

    - by user274947
    I'm using LINQ to Entities for Entity Framework objects in my Data Access Layer. My goal is to filter as much as I can from the database, without applying filtering logic on in-memory results. For that purpose Business Logic Layer passes a predicate to Data Access Layer. I mean Func<MyEntity, bool> So, if I use this predicate directly, like public IQueryable<MyEntity> GetAllMatchedEntities(Func<MyEntity, Boolean> isMatched) { return qry = _Context.MyEntities.Where(x => isMatched(x)); } I'm getting the exception [System.NotSupportedException] --- {"The LINQ expression node type 'Invoke' is not supported in LINQ to Entities."} Solution in that question suggests to use AsExpandable() method from LINQKit library. But again, using public IQueryable<MyEntity> GetAllMatchedEntities(Func<MyEntity, Boolean> isMatched) { return qry = _Context.MyEntities.AsExpandable().Where(x => isMatched(x)); } I'm getting the exception Unable to cast object of type 'System.Linq.Expressions.FieldExpression' to type 'System.Linq.Expressions.LambdaExpression' Is there way to use predicate in LINQ to Entities query for Entity Framework objects, so that it is correctly transformed it into a SQL statement. Thank you.

    Read the article

  • problems with async jquery and loops

    - by Seth Vargo
    I am so confused. I am trying to append portals to a page by looping through an array and calling a method I wrote called addModule(). The method gets called the right number of times (checked via an alert statement), in the correct order, but only one or two of the portals actually populate. I have a feeling its something with the loop and async, but it's easier explained with the code: moduleList = [['weather','test'],['test']]; for(i in moduleList) { $('#content').append(''); for(j in moduleList[i]) { addModule(i,moduleList[i][j]); //column,name } } function addModule(column,name) { alert('adding module ' + name); $.get('/modules/' + name.replace(' ','-') + '.php',function(data){ $('#'+column).append(data); }); } for each array in the main array, I append a new column, since that's what each sub-array is - a column of portals. Then I loop through that sub array and call addModule on that column and the name of that module (which works correctly). Something buggy happens in my addModule method that it only adds the first and last modules, or sometimes a middle one, or sometimes none at all... im so confused!

    Read the article

  • ASP.NET MVC Membership, Get new UserID

    - by Vishal Bharakhda
    I am trying to register a new user and also understand how to get the new userID so i can start creating my own user tables with a userID mapping to the asp.net membership user table. Below is my code: [AcceptVerbs(HttpVerbs.Post)] public ActionResult Register(string userName, string email, string position, string password, string confirmPassword) { ViewData["PasswordLength"] = MembershipService.MinPasswordLength; ViewData["position"] = new SelectList(GetDeveloperPositionList()); if (ValidateRegistration(userName, email, position, password, confirmPassword)) { // Attempt to register the user MembershipCreateStatus createStatus = MembershipService.CreateUser(userName, password, email); if (createStatus == MembershipCreateStatus.Success) { FormsAuth.SignIn(userName, false /* createPersistentCookie */); return RedirectToAction("Index", "Home"); } else { ModelState.AddModelError("_FORM", ErrorCodeToString(createStatus)); } } // If we got this far, something failed, redisplay form return View(); } I've done some research and many sites inform me to use Membership.GetUser().ProviderUserKey; but this throws an error as Membership is NULL. I placed this line of code just above "return RedirectToAction("Index", "Home");" within the if statement. Please can someone advise me on this... Thanks in advance

    Read the article

  • C++ Switch won't compile with externally defined variable used as case

    - by C Nielsen
    I'm writing C++ using the MinGW GNU compiler and the problem occurs when I try to use an externally defined integer variable as a case in a switch statement. I get the following compiler error: "case label does not reduce to an integer constant". Because I've defined the integer variable as extern I believe that it should compile, does anyone know what the problem may be? Below is an example: test.cpp #include <iostream> #include "x_def.h" int main() { std::cout << "Main Entered" << std::endl; switch(0) { case test_int: std::cout << "Case X" << std::endl; break; default: std::cout << "Case Default" << std::endl; break; } return 0; } x_def.h extern const int test_int; x_def.cpp const int test_int = 0; This code will compile correctly on Visual C++ 2008. Furthermore a Montanan friend of mine checked the ISO C++ standard and it appears that any const-integer expression should work. Is this possibly a compiler bug or have I missed something obvious? Here's my compiler version information: Reading specs from C:/MinGW/bin/../lib/gcc/mingw32/3.4.5/specs Configured with: ../gcc-3.4.5-20060117-3/configure --with-gcc --with-gnu-ld --with-gnu-as --host=mingw32 --target=mingw32 --prefix=/mingw --enable-threads --disable-nls --enable-languages=c,c++,f77,ada,objc,java --disable-win32-registry --disable-shared --enable-sjlj-exceptions --enable-libgcj --disable-java-awt --without-x --enable-java-gc=boehm --disable-libgcj-debug --enable-interpreter --enable-hash-synchronization --enable-libstdcxx-debug Thread model: win32 gcc version 3.4.5 (mingw-vista special r3)

    Read the article

  • PHP IF stops IE content from loading

    - by Rsmithy
    scenario I have a PHP if statement to test if a user is logging in for the first time ever. This then displays, a demo in a greybox popup box. Sadly when the box loads in IE, the content of the website doesn't. This means when I user closes the box, they are left the with background. Code - I'm now using PHP include. greybox.php <?php if ($fli == 0) {echo " <script type='text/javascript'> window.onload = function() { GB_showCenter('Your first login', '../video.php'); }; </script> ";} else echo "";?> <!-- GB scrip --> <script type="text/javascript"> var GB_ROOT_DIR = "greybox/"; </script> <script type="text/javascript" src="greybox/AJS.js"></script> <script type="text/javascript" src="greybox/AJS_fx.js"></script> <script type="text/javascript" src="greybox/gb_scripts.js"></script> <link href="greybox/gb_styles.css" rel="stylesheet" type="text/css" /> <!-- GB --> RELEVANT Script on main site <?php $fli = $_SESSION["USER"]["fli"]; ?> <?php include "greybox.php" ?> I would deeply appreicate any help at all please! :)

    Read the article

  • Visual Studio + Database Edition + CDC = Deploy Fail

    - by Ben
    Hi All, I've got a database using change data capture (CDC) that is created from a Visual Studio database project (GDR2). My problem is that I have a stored procedure that is analyzing the CDC information and then returning data. How is that a problem you ask? Well, the order of operation is as follows. Pre-deployment Script Tables Indexes, keys, etc. Procedures Post-deployment Script Inside the post-deployment script is where I enable CDC. Here-in lies the problem. The procedure that is acting on the CDC tables is bombing because they don't exist yet! I've tried to put the call to sys.sp_cdc_enable_table in the script that creates the table, but it doesn't like that. Error 102 TSD03070: This statement is not recognized in this context. C:...\Schema Objects\Schemas\dbo\Tables\Foo.table.sql 20 1 Foo Is there a better/built-in way to enable CDC such that it's references are available when the stored procedures are created? Is there a way to run a script after tables are created but before other objects are created? How about a way to create the procedure dependencies be damned? Or maybe I'm just doing things that shouldn't be done?!?! Now, I have a work around. Comment out the sproc body Deploy (CDC is created) Uncomment sproc Deploy Everything is great until the next time I update a CDC tracked table. Then I need to comment out the 'offending' procedure. Thanks for reading my question and thanks for your help!

    Read the article

  • JoinColumn name not used in sql

    - by Vladimir
    Hi! I have a problem with mapping many-to-one relationship without exact foreign key constraint set in database. I use OpenJPA implementation with MySql database, but the problem is with generated sql scripts for insert and select statements. I have LegalEntity table which contains RootId column (among others). I also have Address table which has LegalEntityId column which is not nullable, and which should contain values referencing LegalEntity's "RootId" column, but without any database constraint (foreign key) set. Address entity is mapped: @Entity @Table(name="address") public class Address implements Serializable { ... @ManyToOne(fetch=FetchType.LAZY, optional=false) @JoinColumn(referencedColumnName="RootId", name="LegalEntityId", nullable=false, insertable=true, updatable=true, table="LegalEntity") public LegalEntity getLegalEntity() { return this.legalEntity; } } SELECT statement (when fetching LegalEntity's addresses) and INSERT statment are generated: SELECT t0.Id, .., t0.LEGALENTITY_ID FROM address t0 WHERE t0.LEGALENTITY_ID = ? ORDER BY t0.Id DESC [params=(int) 2] INSERT INTO address (..., LEGALENTITY_ID) VALUES (..., ?) [params=..., (int) 2] If I omit table attribute from mentioned statements are generated: SELECT t0.Id, ... FROM address t0 INNER JOIN legalentity t1 ON t0.LegalEntityId = t1.RootId WHERE t1.Id = ? ORDER BY t0.Id DESC [params=(int) 2] INSERT INTO address (...) VALUES (...) [params=...] So, LegalEntityId is not included in any of the statements. Is it possible to have relationship based on such referencing (to column other than primary key, without foreign key in database)? Is there something else missing? Thanks in advance.

    Read the article

  • Create new or update existing entity at one go with JPA

    - by Alex R
    A have a JPA entity that has timestamp field and is distinguished by a complex identifier field. What I need is to update timestamp in an entity that has already been stored, otherwise create and store new entity with the current timestamp. As it turns out the task is not as simple as it seems from the first sight. The problem is that in concurrent environment I get nasty "Unique index or primary key violation" exception. Here's my code: // Load existing entity, if any. Entity e = entityManager.find(Entity.class, id); if (e == null) { // Could not find entity with the specified id in the database, so create new one. e = entityManager.merge(new Entity(id)); } // Set current time... e.setTimestamp(new Date()); // ...and finally save entity. entityManager.flush(); Please note that in this example entity identifier is not generated on insert, it is known in advance. When two or more of threads run this block of code in parallel, they may simultaneously get null from entityManager.find(Entity.class, id) method call, so they will attempt to save two or more entities at the same time, with the same identifier resulting in error. I think that there are few solutions to the problem. Sure I could synchronize this code block with a global lock to prevent concurrent access to the database, but would it be the most efficient way? Some databases support very handy MERGE statement that updates existing or creates new row if none exists. But I doubt that OpenJPA (JPA implementation of my choice) supports it. Event if JPA does not support SQL MERGE, I can always fall back to plain old JDBC and do whatever I want with the database. But I don't want to leave comfortable API and mess with hairy JDBC+SQL combination. There is a magic trick to fix it using standard JPA API only, but I don't know it yet. Please help.

    Read the article

  • Ordering by a max or a min from another table

    - by Paul Tomblin
    I have a table that consists of a unique id, and a few other attributes. It holds "schedules". Then I have another table that holds a list of all the times each schedule has or will "fire". This isn't the exact schema, but it's close: create table schedule ( id varchar(40) primary key, attr1 int, attr2 varchar(20) ); create table schedule_times ( id varchar(40) foreign key schedule(id), fire_date date ); I want to query the schedule table, getting the attributes and the next and previous fire_dates, in Java, sometimes ordering on one of the attributes, but sometimes ordering on either previous fire_date or the next fire_date. Ordering by the attributes is easy, I just stick an "order by" into the string while I'm building my prepared statement. I'm not even sure how to go about selecting the last fire_date and the next one in a single query - I know that I can find the next fire_date for a given id by doing a SELECT min(fire_date) FROM schedule_times WHERE id = ? AND fire_date > sysdate; and the similar thing for previous fire_date using max() and fire_date < sysdate. I'm just drawing a blank on how to incorporate that into a single select from the schedule so I can get both next and previous fire_date in one shot, and also how to order by either of those attributes.

    Read the article

  • Design: How to declare a specialized memory handler class

    - by Michael Dorgan
    On an embedded type system, I have created a Small Object Allocator that piggy backs on top of a standard memory allocation system. This allocator is a Boost::simple_segregated_storage< class and it does exactly what I need - O(1) alloc/dealloc time on small objects at the cost of a touch of internal fragmentation. My question is how best to declare it. Right now, it's scope static declared in our mem code module, which is probably fine, but it feels a bit exposed there and is also now linked to that module forever. Normally, I declare it as a monostate or a singleton, but this uses the dynamic memory allocator (where this is located.) Furthermore, our dynamic memory allocator is being initialized and used before static object initialization occurs on our system (as again, the memory manager is pretty much the most fundamental component of an engine.) To get around this catch 22, I added an extra 'if the small memory allocator exists' to see if the small object allocator exists yet. That if that now must be run on every small object allocation. In the scheme of things, this is nearly negligable, but it still bothers me. So the question is, is there a better way to declare this portion of the memory manager that helps decouple it from the memory module and perhaps not costing that extra isinitialized() if statement? If this method uses dynamic memory, please explain how to get around lack of initialization of the small object portion of the manager.

    Read the article

  • UITableView cell appearance update not working - iPhone

    - by Jack Nutkins
    I have this piece of code which I'm using to set the alpha and accessibility of one of my tables cells dependent on a value stored in user defaults: - (void) viewDidAppear:(BOOL)animated{ [self reloadTableData]; } - (void) reloadTableData { if ([[userDefaults objectForKey:@"canDeleteReceipts"] isEqualToString:@"0"]) { NSIndexPath *path = [NSIndexPath indexPathForRow:0 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 0.2; cell.userInteractionEnabled = NO; } else { NSIndexPath *path = [NSIndexPath indexPathForRow:0 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 1; cell.userInteractionEnabled = YES; } if ([[userDefaults objectForKey:@"canDeleteMileages"] isEqualToString:@"0"]) { NSIndexPath *path = [NSIndexPath indexPathForRow:1 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 0.2; cell.userInteractionEnabled = NO; } else { NSIndexPath *path = [NSIndexPath indexPathForRow:1 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 1; cell.userInteractionEnabled = YES; } if ([[userDefaults objectForKey:@"canDeleteAll"] isEqualToString:@"0"]) { NSIndexPath *path = [NSIndexPath indexPathForRow:2 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 0.2; cell.userInteractionEnabled = NO; NSLog(@"In Here"); } else { NSIndexPath *path = [NSIndexPath indexPathForRow:2 inSection:8]; UITableViewCell *cell = [self.tableView cellForRowAtIndexPath:path]; cell.contentView.alpha = 1; cell.userInteractionEnabled = YES; } } The value stored in userDefaults is '0' so the cell in section 8 row 2 should be greyed out and disabled, however this doesn't happen and the cell is still selectable with an alpha of 1... The log statement 'In Here' is called so it seems to be executing the right code, but that code doesn't seem to be doing anything. Can anyone explain what I've done wrong? Thanks, Jack

    Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >