Search Results

Search found 8303 results on 333 pages for 'knowledge modules'.

Page 238/333 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

  • How to interview a natural scientist for a dev position?

    - by Silas
    I already did some interviews for my company, mostly computer scientists for dev positions but also some testers and project managers. Now I have to fill a vacancy in our research group within the R&D department (side note: “research” means that we try to solve problems in our professional domain/market niche using software in research projects together with universities, other companies, research centres and end user organisations. It’s not computer science research; we’re not going to solve the P=NP problem). Now we invited a guy holding an MSc in chemistry (with a lot of physics in his CV, too), who never had any computer science lesson. I already talked with him about half an hour at a local university’s career days and there’s no doubt the guy is smart. Also his marks are excellent and he graduated with distinction. For his BSc he needed to teach himself programming in Mathematica and told me believably that he liked programming a lot. Also he solved some physical chemistry problem that I probably don’t understand using his own software, implemented in Mathematica, for his MSc thesis. It includes a GUI and a notable size of 8,000 LoC. He seems to be very attracted by what we’re doing in our research group and to be honest it’s quite difficult for an SME like us to get good people. I also am very interested in hiring him since he could assist me in writing project proposals, reports, doing presentations and so on. He would probably fit to our team, too. The only question left is: How can I check if he will get the programming skills he needs to do software implementation in our projects since this will be a significant part of the job? Of course I will ask him what it is, that is fascinating him about programming. I’ll also ask how he proceeded to write his natural science software and how he structured it. I’ll ask about how he managed to obtain the skills and information about software development he needed. But is there something more I could ask? Something more concrete perhaps? Should I ask him to explain his Mathematica solution? To be clear: I’m not looking for knowledge in a particular language or technology stack. We’re a .NET shop in product development but I want to have a free choice for our research projects. So I’m interested in the meta-competence being able to learn whatever is actually needed. I hope this question is answerable and not open-ended since I really like to know if there is a default way to check for the ability to get further programming skills on the job. If something is not clear to you please give me some comments and let me improve my question.

    Read the article

  • How to send multiple MVP matrices to a vertex shader in OpenGL ES 2.0

    - by Carbon Crystal
    I'm working my way through optimizing the rendering of sprites in a 2D game using OpenGL ES and I've hit the limit of my knowledge when it comes to GLSL and vertex shaders. I have two large float buffers containing my vertex coordinates and texture coordinates (eventually this will be one buffer) for multiple sprites in order to perform a single glDrawArrays call. This works but I've hit a snag when it comes to passing the transformation matrix into the vertex shader. My shader code is: uniform mat4 u_MVPMatrix; attribute vec4 a_Position; attribute vec2 a_TexCoordinate; varying vec2 v_TexCoordinate; void main() { v_TexCoordinate = a_TexCoordinate; gl_Position = u_MVPMatrix * a_Position; } In Java (Android) I am using a FloatBuffer to store the vertex/texture data and this is provided to the shader like so: mGlEs20.glVertexAttribPointer(mVertexHandle, Globals.GL_POSITION_VERTEX_COUNT, GLES20.GL_FLOAT, false, 0, mVertexCoordinates); mGlEs20.glVertexAttribPointer(mTextureCoordinateHandle, Globals.GL_TEXTURE_VERTEX_COUNT, GLES20.GL_FLOAT, false, 0, mTextureCoordinates); (The Globals.GL_POSITION_VERTEX_COUNT etc are just integers with the value of 2 right now) And I'm passing the MVP (Model/View/Projection) matrix buffer like this: GLES20.glUniformMatrix4fv(mMVPMatrixHandle, 1, false, mModelCoordinates); (mModelCoordinates is a FloatBuffer containing 16-float sequences representing the MVP matrix for each sprite) This renders my scene but all the sprites share the same transformation, so it's obviously only picking the first 16 elements from the buffer which makes sense since I am passing in "1" as the second parameter. The documentation for this method says: "This should be 1 if the targeted uniform variable is not an array of matrices, and 1 or more if it is an array of matrices." So I tried modifying the shader with a fixed size array large enough to accomodate most of my scenarios: uniform mat4 u_MVPMatrix[1000]; But this lead to an error in the shader: cannot convert from 'uniform array of 4X4 matrix of float' to 'Position 4-component vector of float' This just seems wrong anyway as it's not clear to me how the shader would know when to transition to the next matrix anyway. Anyone have an idea how I can get my shader to pick up a different MVP matrix (i.e. the NEXT 16 floats) from my MVP buffer for every 4 vertices it encounters? (I am using GL_TRIANGLE_STRIP so each sprite has 4 vertices). Thanks!

    Read the article

  • EBS Accounts Payables Customer Advisory

    - by cwarticki
    Blogging to let you know of an important set of Oracle Payables patches that were released for R12.1 customers.  Accounts Payable Customer Advisory: Dear Valued Oracle Support Customer, Since the release of R12.1.3 a number of recommended Payables patches have been made available as standalone patches, to help address important business process incidents. Adoption of these patches is highly recommended. To further facilitate adoption of these Payables patches Oracle has consolidated them into a single Recommended Patch Collection (RPC). The RPC is a collection of recommended Payables patches created with the following goals in mind: Stability: Help address issues that are identified by Oracle Development and Oracle Software Support that may interfere with the normal completion of important business processes such as period close. Root Cause Fixes: Help make available root cause fix for data integrity that may delay period close, normal invoice flow and other business actions. Compact: Keep the file footprint as small as possible to help facilitate the install process and minimize testing. Granular: Collection of patches based on functional area that allows customer to apply, based on their individual needs and goals, all three RPC’s at once or in phases. Payables: -          New AP RPC (14273383:R12.AP.B) has all data corruption root cause fixes known to date plus tons of other crucial fixes (Note: 1397581.1). -          Companion must have RPCs: o   Note: 1481221.1: R12.1: Payments Recommended Patch Collection (IBY RPC), August 2012 o   Note: 1481235.1: R12.1: E-Business Tax Recommended Patch Collection (ZX RPC), August 2012 o   Note: 1481222.1: R12.1: Sub Ledger Accounting (SLA) Recommended Patch Collection (XLA RPC), August 2012 -          This time we beat the system far harder on testing and it held up remarkably well. We could not get any data corruption events in the Invoice Cancel/Discard flow (that is the #1 generator) neither we could cause Orphan Events in the system. Therefore this is very good code. Financials: -          ALL FIN modules now have RPCs: full listing is in (Note: 954704.1)

    Read the article

  • WebCenter Customer Spotlight: SICE

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummarySociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) is a Spanish company specializes in engineering and technology integration for intelligent transport systems and environmental control systems. They had a large quantity of engineering and environmental planning documents  which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. SICE adapted  Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution with SICE’s third-party enterprise resource planning (ERP) system. SICE  accelerated time to market for all projects, minimized time required to identify and recover documents  and achieved greater efficiency in all operations. Company Overview Created in 1921, Sociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) currently specializes in engineering and technology integration for intelligent transport systems and environmental control systems. It has more than 2,500 employees, with operations in Spain and various locations in Latin America, the United States, Africa, and Australia. Business Challenges They had a large quantity of engineering and environmental planning documents generated in research and projects which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. Solution Deployed SICE worked with the Oracle Partner ABAST Solutions to evaluate and choose the best document management system, ultimately selecting Oracle WebCenter Content over other options including  Documentum, SharePoint, OpenText, and Alfresco.They adapted Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution  with SICE’s third-party enterprise resource planning (ERP) system to accelerate incorporation with the documentation system and ensure integrity ERP system data. Business Results SICE  accelerated time to market for all projects by releasing reports and information that support and validate engineering projects, stored all documents in a single repository with organizationwide accessibility, minimizing time required to identify and recover documents needed for reports to initiate and execute engineering and building projects. Overall they achieved greater efficiency in all operations, including technical and impact report development and construction documentation management. “The correct and efficient management of information is vital to our environmental management activity. Oracle WebCenter Content  serves as a basis for knowledge management practices, with the objective of adding greater value to everything that we do.” Manuel Delgado, IT Project Engineering, Sociedad Ibérica de Construcciones Eléctricas, S.A Additional Information SICE Customer Snapshot Oracle WebCenter Content

    Read the article

  • Parallel Port Problem in 12.04

    - by Frank Oberle
    I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

    Read the article

  • Oracle Partner Architects Training

    - by mseika
    Dear Oracle Partner, There is a lot more to Oracle technology than meets the eye. Sure, you already belong to a small circle of our most experienced and committed partners. But are you making the best use possible of our technology solutions? Put it to the test.  Join the “Oracle Partner Architects Training”. It is aimed at providing your experts, architects and consultants with in-depth architectural knowledge about Oracle technology. Here is your chance to learn from the best. Seasoned speakers, exclusive content and no product marketing. Oracle technology beyond the obvious. Choose from any of the 40 recorded training sessions. Topics include:  • Security• Service integration • Database and options• Data integration • BI and applications• Applications and infrastructure• Hardware and software combinations The market and Oracle value specialized partners More information about specialization can be found on opn.oracle.com. Click through to OPN Program/Specialize “What’s in it for us?” Quite simply: the opportunity to gain the differentiation and competitive edge you need to stand out in the marketplace. • Differentiate your company through expertise in leading Oracle IT solutions;• Get your experts, architects and consultants up to speed on specialized services and solutions;• Make our customers’ shortlists. They are looking for value-added solutions for their business.   Recordings All sessions are recorded. After registering for a session in oraevents, you will receive the info to access the webex recording. Your timing, your tempo.  Registration and more information Visit architects.oraevents.eu to sign up for the recorded sessions. NOTE: Looking to get your consultants Oracle certified? One more reason to join the Oracle Partner Architects Training. It is the fast track to getting their expertise validated with an Oracle certificate. Training schedule  Choose from any of the 40 recorded training sessions: SECURITY THE PRACTICAL APPROACH •  Identity governance• Access management• Data privacy and protection• End-to-end security, layers of exposures•  Identity & access management, why and where to start?• Data security, how? SERVICE INTEGRATION A NEW ROADTO ENTERPRISE-WIDE SERVICE INTEGRATION • Oracle RUEI: maximize business value by insight into real end-user experiences•  Governance challenges in the services landscape•  Creating an agile enterprise (by Jeff Davies)• Oracle’s approach to SOA (by Jeff Davies) - guiding and accelerating SOA success• Technical case study – the SOA challenge• Oracle’s unified business process management suite 11g (incl. demo) DATABASE DATABASE AND OPTIONS, GOINGWIDE •  Understanding service level agreements for databases• Database lifecycle management• Data centric information lifecycle management DATA INTEGRATION  DIS FOR ARCHITECTS • Data integration solutions: an overview• ODI and goldengate• Data quality

    Read the article

  • Why does the login screen fail to appear?

    - by a different ben
    My system: Dell Precision T3500 nVidia Quadro NVS 295 Ubuntu 12.04 x86_64 (3.2.0-32) Essential problem: On boot my system won't get past the splash screen. I can switch to another virtual terminal and log in, I can also ssh from another system -- so it appears that the problem might be with the display manager. How can I diagnose and fix this problem? More info: From a VT I can issue sudo lightdm restart, and this will bring up the login screen and and I can continue from there. So I do have access to my system. Update-manager recently updated a number of packages, including a bunch of x11 and xorg packages, some nVidia drivers, rpcbind, etc etc. My boot log (if that is any guidance) says the following: fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 rpcbind: Cannot open '/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) /dev/sda1: clean, 597650/1525920 files, 3963433/6103296 blocks /dev/sda7: clean, 11/6406144 files, 450097/25608703 blocks /dev/sda5: clean, 158323/1525920 files, 1886918/6103296 blocks /dev/sda8: clean, 250089/107929600 files, 111088810/431689728 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Starting ClamAV virus database updater freshclam [80G [74G[ OK ] * Starting Name Service Cache Daemon nscd [80G [74G[ OK ] * Starting modem connection manager[74G[ OK ] * Starting K Display Manager[74G[ OK ] * Starting mDNS/DNS-SD daemon[74G[ OK ] * Stopping GNOME Display Manager[74G[ OK ] * Stopping K Display Manager[74G[ OK ] * Starting bluetooth daemon[74G[ OK ] * Starting network connection manager[74G[ OK ] * Starting Postfix Mail Transport Agent postfix [80G [74G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting VirtualBox kernel modules [80G [74G[ OK ] * Starting the Winbind daemon winbind [80G [74G[ OK ] saned disabled; edit /etc/default/saned * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ] * Checking battery state... [80G [74G[ OK ] nxsensor is disabled in '/usr/NX/etc/node.cfg' Trying to start NX server: NX 122 Service started. NX 999 Bye. Trying to start NX statistics: NX 723 Cannot start NX statistics: NX 709 NX statistics are disabled for this server. NX 999 Bye. * Stopping System V runlevel compatibility[74G[ OK ] * Starting Mount network filesystems[74G[ OK ] * Stopping Mount network filesystems[74G[ OK ] * Stopping regular background program processing daemon[74G[ OK ] * Starting regular background program processing daemon[74G[ OK ] * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ]

    Read the article

  • ArchBeat Link-o-Rama for 2012-10-12

    - by Bob Rhubart
    This is your brain on IT architecture. Oracle Technology Network Architect Day in Los Angeles, Oct 25 This is your brain on IT architecture. Stuff your cranium with architecture by attending Oracle Technology Network Architect Day in Los Angeles, October 25, 2012, at the Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Technical sessions, panel Q&A, and peer roundtables--plus a free lunch. Register now. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. ExaLogic Hackers Night - November 19th Nürnberg Germany | WebLogic Partner Community EMEA Want to get your hands on Oracle Exalogic? Make your way to Nürnberg, Germany for this Exalogic Hacker's Night on November 19, 2012. Experts will be on hand to help you test your ideas. (The blog post is in English, but the event registration page is in German.) Thought for the Day "A foolish consistency is the hobgoblin of little minds…" — Ralph Waldo Emerson (May 25, 1803 – April 27, 1882) Source: SoftwareQuotes.com

    Read the article

  • Lookup Viewer

    - by Geertjan
    The Maven integrated view that I showed yesterday I was able to create because I happened to know that an implementation of SubprojectProvider and LogicalViewProvider are in the Lookup of Maven projects. With that knowledge, I was able to use and even delegate to those implementations. But what if you don't know that those implementations are in the Lookup of the Project object? In the case of the Maven Project implementation, you could look in the source code of the Maven Project implementation, at the "getLookup" method. However, any other module could be putting its own objects into that Lookup, dynamically, i.e., at runtime. So there's no way of knowing what's in the Lookup of any Project object or any other object with a Lookup. But now imagine that you have a Lookup Viewer, as a tool during development, which you would exclude when distributing the application. Whenever new objects are found in the Lookup, the viewer displays them. You could install the Lookup Viewer into NetBeans IDE, or any other NetBeans Platform application, and then get a quick impression of what's actually in the Lookup when you select a different item in the application during development. Here it is (though I vaguely remember someone else writing something similar): Above, a Maven Project is selected. The Lookup Window shows that, among many other classes, an implementation of SubprojectProvider and LogicalViewProvider are found in the Lookup when the Maven Project is selected. If an item in the Lookup Window has its own Lookup, the content of that Lookup is displayed as child nodes of the Lookup, etc, i.e., you can explore all the way down the Lookup of each item found within objects found within the current selection. (What's especially fun is seeing the SaveCookieImpl being added and removed from the Lookup Window when you make/save a change in a document.) Another example is below, showing the Lookup Window installed in a custom application created during a course at MIT in Boston: A small trick I had to apply is that I always show the previous Lookup, since the current Lookup, when you select one of the Nodes in the Lookup Window, would be the Lookup of the Lookup Window itself! If anyone is interested in this, I can publish the NetBeans module providing the above window to the NetBeans update center. 

    Read the article

  • Creating a shared library that might be used with desktop applications and web projects

    - by dreza
    I have been involved in a number of MVC.NET and c# desktop projects in our company over the last year or so while also managing to kept my nose poked into other projects (in a read-only learning capacity of course). From this I've noticed that across the various projects and teams there is a-lot of functionality that has been well designed against good interfaces and abstractions. Because we tend to like our own work at times, I noticed a couple of projects had the exact same class, method copied into it as it had obviously worked on one and so was easily moved to a new project (probably by the same developer who originally wrote it) I mentioned this fact in one of our programmer meetings we have occasionally and suggested we pull some of this functionality into a core company library that we can build up over time and use across multiple projects. Everyone agreed and I started looking into this possibility. However, I've come across a stumbling block pretty early on. Our team primarily focuses on MVC at the moment and we have projects mainly in 2.0 but are starting to branch to 3.0. We also have a number of desktop applications that might benefit from some shared classes and basic helper methods. Initially when creating this DLL I included some shared classes that could be used across any project type (Web, Client etc) but then I started looking at adding some shared modules that would be useful in our MVC applications only. However this meant I had to include a reference to some Microsoft Web DLL's in order to leverage some of the classes I was creating (at this stage MVC 2.0). Now my issue is that we have a shared DLL that has references to web specific libraries that could also possibly be used in a client application. Not only that, our DLL referenced initially MVC 2.0 and we will eventually move onto MVC 3.0 for all projects. But alot of the classes in this library I expect to still be relevant to MVC 3 etc Our code within this DLL is separated into it's own namespaces such as: CompanyDLL.Primitives CompanyDLL.Web.Mvc CompanyDLL.Helpers etc etc So, my questions are: Is it OK to do a shared library like this, or if we have web specific features in it should we create a separate web DLL only targeted at a specific framework or MVC version? If it's OK, what kind of issues might we face when using the library that references MVC 2 in a MVC 3 project for example. I would be thinking that we might run into some sort of compatibility issue, or even issues where the developers using the library doesn't realize they need MVC 2.0 libraries. They might only want to use some of the generic classes etc The concept seemed like a good idea at the time, but I'm starting to think maybe it's not really a practical solution. But the number of times I've seen copied classes and methods across projects because they are proven tested code is a bit unnerving to be perfectly honest!

    Read the article

  • The Internet Key Wave MW833UP is not recognized in Ubuntu

    - by gio900
    I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

    Read the article

  • Eloqua Sales Awareness Training for Partners - London, November 28-29

    - by Richard Lefebvre
    We are pleased to invite you to the free of charge Oracle Eloqua Sales Awareness Training for Partners - London, November 28&29 - COME LEARN WHAT ALL THE BUZZ IS ABOUT! WHEN SALES & MARKETING BOND, REVENUE GROWS It’s not one thing that makes a company successful with marketing automation – it’s the combination of the best implementation, flexible long-term support and access to a community of marketing innovation that ensures you have the assistance you need every step of the way. Our customers choose Oracle|Eloqua because they know when sales and marketing work together, leads are called upon, quotas are crushed and revenues climb. Learn how Oracle|Eloqua can help you put marketing to work for you! COVERED IN THIS TRAINING Eloqua and the Customer Experience Strategy How Modern Marketing Works Introduction to Eloqua – Whiteboard POV Go To Market Playbook Competitive Landscape Integration Options Service Offerings With case studies, workshops and product demos to help you on your way to a new world of marketing expertise LOGISTICS If you are ready to join us on this journey, now’s the time to let us know! Tell us a little about your experience – complete this form to help us know you better (Please ignore if your firm has already completed) Complete this form to RSVP by Thursday, November 21, 2013. Find out more about the Oracle|Eloqua, join the Oracle Eloqua Marketing Cloud Service Knowledge Zone and keep up on all the news! QUESTIONS? Contact [email protected] Please note that similar events will take place in other cities (Brussels, Istanbul and more come) later in 2014. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

    Read the article

  • What to do when you inherit an unmaintainable codebase?

    - by GordonM
    I'm currently working at a company with 2 other PHP developers aside from me, and 1 junior developer. The senior developer who originally built the system we're all working on has resigned and will only be here for a matter of weeks. The other developer, who is the only other guy who knows anything about the system, is unhappy here and is looking for a new job. I'm very real danger of being left behind as the only experienced developer on this codebase. Since I've joined this company I've tried to push for better coding standards, project documentation, etc and I do think I've made some headway, but the vast majority of the code is simply unmaintainable and uncommented. A lot of this has to do with the need to get things done fast at points in the project before I joined, but now the technical debt is enormous, even with the two developers who do understand the system on board. Without them, it will simply be impossible to do anything with it. The senior developer is working on trying to at least comment all his code before he leaves but I think the codebase is simply too vast to properly document in the remaining time. Besides, when he does comment it still doesn't make things as clear as it could. If the system was better organized and documented I could probably start refactoring it incrementally, but the whole thing is so tightly coupled that it's very difficult to make any changes in one module without having unintended knock-on effects in other modules. Naturally, there's no unit tests either, and I honestly don't think this codebase could possibly be unit tested anyway given how it's implemented. There also never seems to be enough time to get things done even with 3 developers and 1 junior developer. With one developer and one junior, neither of which had significant input into the early design of the system, I don't see how we could possibly get anything done with keeping the current system working, implementing new features as needed and developing a replacement for the current codebase that is better organized. Is there an approach I can take to cope with this situation, or should I be getting my own CV in order as well at this point? If it was just me and the junior designer who would be left I'd go for the latter option almost without question. However, there's a team of front-end developers and content managers as well, and I'm worried what would become of them if I left and put them in a position where there would be no developers at all. The department might just be closed down altogether under such circumstances, and then I'd have their unemployment on my conscience as well!

    Read the article

  • How to be successful at BDD Specifications Workshops?

    - by sigo
    Today we tried to introduce BDD in our software development process by having a specification workshop. For this workshop we had 2 developers, 1 tester and 1 business analyst. The workshop lasted 1h30 and by the end of it we managed to figure out some BDD scenarios for our new feature. We tried to focus on finding the scenarios that we could miss, and the difficult ones. At the end of the workshop some people were actually unhappy with the workshop. One developer felt he wasted his time as he was used to be given out the scenarios directly by the business analyst and review them with her. The business analyst didn't feel confident with our scenario coverage (Had a feeling that we could have missed out other important stuff) but more importantly felt that this workshop was also a waste of time as she could have figured out all these scenarios by herself and in a shorter period of time. So my question is how that kind of workshop can actually work. In the theory, given you have a new feature to develop, you put the tree 'amigos' (dev/tester/ba) in the same room so that they can collaborate together on writing the differents requirements for the new feature using examples. I can see all the benefits from that. Specially in term of knowledge sharing and common product/end goal/done vision. But in practice, we still think it is more cost effective to first have a BA to work on his own on the examples and only then to have the scenarios to be reviewed/reworked by the 3 'amigos'. By having the BA to work on his own, we actually feel more confident that we are less going to miss out stuff + we still get to review the scenarios afterward to double check. We don't think than simple brainstorming/deliberate discovery is actually enought to seriously cover all the requirement for a feature. The business analyst is actually the best person for that kind of stuff. The thing we just do is to review what she wrote and see if then we have a common understanding (which could then lead to rewrite some of her scenarios or add new ones she could have missed). This workshop lasted 1h30, and by the end of it, we didn't feel confident enought about wha we did...sure we could have spent more time on it but honestly most people get exhausted after 1h30 of brainstorming. So how can you get that to work effectively in practice ?

    Read the article

  • So, I though I wanted to learn frontend/web development and break out of my comfort zone...

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • SSH from external network refused

    - by wulfsdad
    I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

    Read the article

  • Oracle BPM and Open Data integration development

    - by drrwebber
    Rapidly developing Oracle BPM application solutions with data source integration previously required significant Java and JDeveloper skills. Now using open source tools for open data development significantly reduces the coding needed.  Key tasks can be performed with visual drag and drop designing combined with menu selections entry and automatic form generation directly from XSD schema definitions. The architecture used is extremely lightweight, portable, open platform and scalable allowing integration with a variety of Oracle and non-Oracle data sources and systems. Two videos available on YouTube walk through the process at both an introductory conceptual level and then a deep dive into the programming needed using JDeveloper, Oracle BPM composer and Oracle WLS (WebLogic Server) along with the CAM editor and Open-XDX open source tools. Also available are coding samples and resources from the GitHub project page, along with working online demonstration resources on the VerifyXML site. Combining Oracle BPM with these open source tools provides a comprehensive simple and elegant solution set. Development times are slashed and rapid prototyping is enabled. Also existing data sources can be integrated using open data formats with either XML or JSON along with CRUD accessing via the Open-XDX Java component. The Open-XDX tool is a code-free approach where data mapping is configured as templates using visual drag and drop in the CAM Editor open source tool.  XML or JSON is then automatically generated or processed (output or input) and appropriate SQL statements created to support the data accessing.   Also included is the ability to integrate with fillable PDF forms via the XML templates and the Java PDF form filling library.  Again minimal Java coding is needed to associate the XML source content with the PDF named fields.  The Oracle BPM forms can be automatically generated from XSD schema definitions that are built from the data mapping templates.  This dramatically simplifies development work as all the integration artifacts needed are created by the open source editor toolset. The developer level video is designed as a tutorial with segments, hands-on demonstrations and reviews.  This allows developers to learn the techniques and approaches used in incremental steps. The intended audience ranges from data analysts to developers and assumes only entry level Java skills and knowledge.  Most actions are menu driven while Java coding is limited to simply configuring values and parameters along with performing builds and deployments from JDeveloper and Oracle WLS.   Additional existing Oracle online training resources can be referenced on Oracle BPM and WLS that cover other normal delivery aspects such as user management and application deployment.

    Read the article

  • Oracle OpenWorld / JavaOne Where I'll Be

    - by Shay Shmeltzer
    It's that time of the year again when San Francisco get flooded with Oracle and Java geeks for the annual OpenWorld and JavaOne conferences. Here are some of the places where you'll be able to find me: Sunday has a bunch of great ADF content in the ADF Enterprise Methodology Group track - I'm not sure if I'll make it there but I'm sure those who will will get some serious knowledge transfer. I'm starting Monday at the Keynote for Developers (10:45 in Salon 8 at the Marriott) - that's a great place for ADF developers to start the official week with an overview of what's new and upcoming in the world of development with ADF. While I'm not presenting this session - Chris Tonas who leads the development tools org will -  a demo that I built will be shown. So I'll be sitting in the audience crossing my fingers praying for the demo gods (and the wifi connection to work). My presentation part of the week starts on Monday at 12:15 at Moscone South room 306 where I'll be presenting "CON3004 - Understanding Oracle ADF and Its Role in Oracle Fusion"  . A basic introduction to ADF, it's architecture, development experience and how it integrates and works with the rest of the Fusion Middleware components.  After the session between 2-4 I'll be at the JDeveloper demo booth in Moscone South to answer any questions people might have. Then at 6:15 together with Grant we'll host BOF4492 - How to Get Started with Oracle ADF where we'll try and explain some of the learning paths and resources that are available for people who want to start learning ADF. This is a birds-of-a-feather so we'll also love to hear ideas from the audience about what paths they took and what things work or need improvment. Tuesday is relatively a quite day for me with a shift at the Oracle ADF Essentials pod at JavaOne from 1:30-3:30. There are several very good ADF architecture and best practices sessions on that day - so I'll try and hit those. Wednesday starts with another shift at the JDeveloper booth at JavaOne. Then at 4:30, instead of doing what all the ADF developers should do and heading over to the ADF meetup at the OTN Lounge, I'll be heading over to JavaOne for my CON3770 - Oracle JDeveloper and Oracle ADF: What’s New session. It's been a couple of years since the last time JDeveloper or ADF got any airtime at JavaOne - so it will be a great opportunity to show those in the Java community with open minds our approach to Java development. Now that ADF Essentials offers a free way to develop with ADF on GlassFish, I hope we'll be getting more people from the core Java camp interested in what we have to offer. Thursday is another relaxed day for me - who knows maybe I'll even be able to catch a session or two on that day. If you want to learn more about the ADF related sessions at OOW check out our full list here.

    Read the article

  • A little gem from MPN&ndash;FREE online course on Architectural Guidance for Migrating Applications to Windows Azure Platform

    - by Eric Nelson
    I know a lot of technical people who work in partners (ISVs, System Integrators etc). I know that virtually none of them would think of going to the Microsoft Partner Network (MPN) learning portal to find some deep and high quality technical content. Instead they would head to MSDN, Channel 9, msdev.com etc. I am one of those people :-) Hence imagine my surprise when i stumbled upon this little gem Architectural Guidance for Migrating Applications to Windows Azure Platform (your company and hence your live id need to be a member of MPN – which is free to join). This is first class stuff – and represents about 4 hours which is really 8 if you stop and ponder :) Course Structure The course is divided into eight modules.  Each module explores a different factor that needs to be considered as part of the migration process. Module 1:  Introduction:  This section provides an introduction to the training course, highlighting the values of the Windows Azure Platform for developers. Module 2:  Dynamic Environment: This section goes into detail about the dynamic environment of the Windows Azure Platform. This session will explain the difference between current development states and the Windows Azure Platform environment, detail the functions of roles, and highlight development considerations to be aware of when working with the Windows Azure Platform. Module 3:  Local State: This session details the local state of the Windows Azure Platform. This section details the different types of storage within the Windows Azure Platform (Blobs, Tables, Queues, and SQL Azure). The training will provide technical guidance on local storage usage, how to write to blobs, how to effectively use table storage, and other authorization methods. Module 4:  Latency and Timeouts: This session goes into detail explaining the considerations surrounding latency, timeouts and how to assess an IT portfolio. Module 5:  Transactions and Bandwidth: This session details the performance metrics surrounding transactions and bandwidth in the Windows Azure Platform environment. This session will detail the transactions and bandwidth costs involved with the Windows Azure Platform and mitigation techniques that can be used to properly manage those costs. Module 6:  Authentication and Authorization: This session details authentication and authorization protocols within the Windows Azure Platform. This session will detail information around web methods of authorization, web identification, Access Control Benefits, and a walkthrough of the Windows Identify Foundation. Module 7:  Data Sensitivity: This session details data considerations that users and developers will experience when placing data into the cloud. This section of the training highlights these concerns, and details the strategies that developers can take to increase the security of their data in the cloud. Module 8:  Summary Provides an overall review of the course.

    Read the article

  • Switch from back-end to front-end programming: I'm out of my comfort zone, should I switch back?

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Data Source Use of Oracle Edition Based Redefinition (EBR)

    - by Steve Felts
    Edition-based redefinition is a new feature in the 11gR2 release of the Oracle database. It enables you to upgrade the database component of an application while it is in use, thereby minimizing or eliminating down time. It works by allowing for a pre-upgrade and post-upgrade view of the data to exist at the same time, providing a hot upgrade capability. You can then specify which view you want for a particular session.  See the Oracle Database Advanced Application Developer's Guide for further information. There is also a good white paper at Edition Based Definition. Using this feature of the Oracle database does not require any new WebLogic Server functionality. It is set for each connection in the pool automatically by simply specifying SQL ALTER SESSION SET EDITION = edition_name in the Init SQL parameter in the data source configuration. This can be configured either via the console or via WLST (setInitSQL on the JDBCConnectionPoolParams). This SQL statement is executed for each newly created physical database connection.Note that we are assuming that a data source references only one edition of the database. To make use of this feature, you would have an earlier version of the application with a data source that references the earlier EDITION and a later version of the application with a data source that references the later EDITION.   Once you start talking about multiple versions of a WLS application, you should be using the WLS "side-by-side" or "versioned" deployment feature.  See Developing Applications for Production Redeployment for more information.  By combining Oracle database EBR and WLS versioned deployment, the application can be failed over with no downtime, making the combination of features more powerful than either independently. There is a catch - you need to be running with a versioned database and a versioned application initially so then you can switch versions.  The recommended way to version a WLS application is to simply add the "Weblogic-Application-Version" property in the MANIFEST.MF file(you can also specify it at deployment time). The recommended way to configure the data source is to use a packaged data source descriptor that's stored in the ear or war so that everything is self-contained.  There are some restrictions.  You can't use a packaged data source with Logging Last Resource (LLR) - you need to use a system resource.  You can't use an application-scoped packaged data source with EmulateTwoPhaseCommit for the global-transactions-protocol with a versioned application - use a global scope.  See Configuring JDBC Application Modules for Deployment for more details. There's one known problem - it doesn't work correctly with an XA data source (patch available with bug 14075837).

    Read the article

  • Partner BI Applications 4-Day Hands-on Training Workshop

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} 12th - 15th February 2012, Oracle Reading (UK) - REGISTER NOW This training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics: Overview of Oracle Business Intelligence Applications Oracle BI Applications Fundamentals and Features Configuring BI Applications for Oracle E-Business Suite Understanding BI Applications Architecture Fundamentals of BI Applications Security Prerequisites - This training is only for OPN member Partners. Good understanding of basic data warehousing concepts Hands on experience in Oracle Business Intelligence Enterprise Edition Hands on experience in Informatica Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables Some understanding of  Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM)  Please note that attendees are required to bring a laptop. Laptop 4GB RAM-Recognized by Windows 64 bits 80GB free space in Hard drive or External Device CPU Core 2 Duo or Higher Operating System Requirements Windows 7, Windows XP, Windows 2003 NOT ALLOWED with Windows Vista An Administrator User

    Read the article

  • My Doors - Why Standards Matter to Business

    - by [email protected]
    By Brian Dayton on April 8, 2010 9:27 PM "Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

    Read the article

  • Feedback from SQLBits 8

    - by Peter Larsson
    This years SQLBits occurred in Brighton. Although I didn’t have the opportunity to attend the full conference, I did a presentation at Saturday. Getting to Brighton was easy. Drove to Copenhagen airport at 0415, flew 0605 and arrived at Gatwick 0735. Then I took the direct train to Brighton and showed up at 0830, just one hour before presenting. This was the easy part. Getting home was much worse. Presentation ended at 1030 and I had to rush to the train station to get back to London, change to tube for Heathrow. Made it at the gate just 15 seconds before closing. That included a half mile run in the airport… Anyway, yesterday I got the feedback for my presentation. It does look good, especially since English is not my first language. This is the first graph Seems to be just halfway between conference average and best session. I can live with that. Second graph shows more detail about attendees voting. It also look acceptable. A wider spread for the 9’s, but it is an inevitable effect from how attendees percept the session. I did get a lot of 8’s and the lower grades in an descending order. The two people voting 4 and 5 didn’t say why they voted this so I don’t know how to remedy this. Third graph is about each category of votes.   Again, I find this acceptable. The Session abstract and Speaker’s knowledge seems to follow attendees expectations compared to conference average. I seem to have met the attendees expectations (and some more) for the other four categories, also compared to conference average. Since this did encourage me, I believe I will present some more at future meetings. I do have a new presentation about something all developers are doing every day but they may not know it. I will also cover this new topic in the next Deep Dives II book. Stay tuned! //Peter

    Read the article

  • PASS Summit for SQL Starters

    - by Davide Mauri
    I’ve received a buch of emails from PASS Summit “First Timers” that are also somehow new to SQL Server (for “somehow” I mean people with less than 6 month experience but with some basic knowledge of SQL Server engine) or are catching up from SQL Server 2000. The common question regards the session one should not miss to have a broad view of the entire SQL Server platform have some insight into some specific areas of SQL Server Given that I’m on (semi-)vacantion and that I have more free time (not true, I have to prepare slides & demos for several conferences, PASS Summit  - Building the Agile Data Warehouse with SQL Server 2012 - and PASS 24H - Agile Data Warehousing with SQL Server 2012 - among them…but let’s pretend it to be true), I’ve decided to make a post to answer to this common questions. Of course this is my personal point of view and given the fact that the number and quality of session that will be delivered at PASS Summit is so high that is very difficoult to make a choice, fell free to jump into the discussion and leave your feedback or – even better – answer with another post. I’m sure it will be very helpful to all the SQL Server beginners out there. I’ve imposed to myself to choose 6 session at maximum for each Track. Why 6? Because it’s the maximum number of session you can follow in one day, and given that all the session will be on the Summit DVD, they are the answer to the following question: “If I have one day to spend in training, which session I should watch?”. Of course a Summit is not like a Course so a lot of very basics concept of well-established technologies won’t be found here. Analysis Services, Integration Services, MDX are not part of the Summit this time (at least for the basic part of them). Enough with that, let’s start with the session list ideal to have a good Overview of all the SQL Server Platform: Geospatial Data Types in SQL Server 2012 Inside Unstructured Data: SQL Server 2012 FileTable and Semantic Search XQuery and XML in SQL Server: Common Problems and Best Practice Solutions Microsoft's Big Play for Big Data Dashboards: When to Choose Which MSBI Tool Microsoft BI End-User Tools 360° for what concern Database Development, I recommend the following sessions Understanding Transaction Isolation Levels What to Look for in Execution Plans Improve Query Performance by Fixing Bad Parameter Sniffing A Window into Your Data: Using SQL Window Functions Practical Uses and Optimization of New T-SQL Features in SQL Server 2012 Taking MERGE Beyond the Basics For Business Intelligence Information Delivery Analyzing SSAS Data with Excel Building Compelling Power View Reports Managed Self-Service BI PowerPivot 101  SharePoint for Business Intelligence The Best Microsoft BI Tools You've Never Heard Of and for Business Intelligence Architecture & Development BI Power Hour Building a Tabular Model Database Enterprise Information Management: Bringing Together SSIS, DQS, and MDS SSIS Design Patterns Storing Columnstore Indexes Hadoop and Its Ecosystem Components in Action Beside the listed sessions, First Timers should also take a look the the page PASS set up for them: http://www.sqlpass.org/summit/2012/Connect/FirstTimers.aspx See you at PASS Summit!

    Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >