Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 239/431 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

  • I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

    - by Thomas B.
    I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

    Read the article

  • Transparently cache files from a network drive in Linux

    - by Vadim
    We have a Linux server that reads files from a network drive and processes them. In a common scenario, a user will log in and access the same files over and over again. The size of the files varies but the larger ones can be around 50+ Mb. The files seldom change. I was wondering if it's somehow possible to transparently cache the files. I don't want (or can) change the program the reads the files, nor do I control the protocol by which the files are accessed. I just want something to detect that I access a certain path, copy the file locally (if needed) and then read the file from the local drive. I've read about Bcache but can't figure out if it's what I need. Do you have any suggestions? Thanks, Vadim.

    Read the article

  • understanding mount -o bind

    - by Ionut
    Few questions after the following commands: mount -o bind /new_disk/home/user/ /home/user/ mount -o bind --no-mtab /new_disk/home/user/ /home/user/ What is the difference between the two commands other than " Mount without writing in /etc/mtab. This is necessary for example when /etc is on a read-only filesystem." What is the difference between mount -o bind and mount --bind ...if there are Let's suppose i don't know there is a partition mounted using -o bind --no-mtab...where can I find if there is any mound point with bind ? The only way i can detect this is grep user /proc/mounts but in that line there is no info abut bind. Thank you.

    Read the article

  • how to change interface ip in ifconfig with /etc/network/interfaces

    - by user2478348
    Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

    Read the article

  • Configuring BIND to use VM's DNS for specific domain

    - by Srirangan
    I work on a project for which I use an Ubuntu server vm on an Ubuntu host. The VM runs all the services / webapps through haproxy and nginx and serves it on the domain (xyz.com). I manually modify my resolv.conf to use the VMs IP address as the nameserver and I can run my app on the host browser. The problem is I am modifying an auto-generated file (resolv.conf) and I need to do it each time. Is there a smart way to say: -- are you accessing xyz.com? -- if yes use VM's DNS server, else use the hosts

    Read the article

  • Getting around the FAT32 4GB file size limit

    - by Aesir
    I recently purchased a 32GB USB 3 stick that was formatted FAT32. I plugged it into my computer and attempted to copy a film onto it, the file was over 4GB however and it would not let me copy the file across because of the 4GB file size limit imposed by FAT32. After some googling I found that I could format my USB stick to have an exFAT format which would mean I could put files onto the stick greater than 4GB in size and the drive would work on both my Mac and my PC. The problem with this solution is that my PS3 cannot detect the USB stick when it is formatted with exFAT. I would like to know if there is a way I can have my USB stick formatted so it can have files greater than 4 GB and work on my PC, Mac and PS3.

    Read the article

  • Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

    - by ale
    I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

    Read the article

  • How to control fan speed on Compaq Presario under Ubuntu?

    - by Josh
    I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensores-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)

    Read the article

  • if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

    - by EndangeringSpecies
    suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

    Read the article

  • Dedicated Mouse and Keyboard on VirtualBox VM

    - by Myersguy
    Currently I am trying to run VirtualBox on my second monitor, with a dedicated mouse and keyboard. However, doing so has not proven easy. There has been times where the mouse works, but not the keyboard, vice versa, or nothing works at all. The biggest problem I am running into is this: When enabling the USB mouse and keyboard from the VM, I get an error: 'USB Device is busy with a previous request.' The only thing that is using second mouse and keyboard, however, is Windows. The other error I have received stated that the VM was unable to create a proxy for the device. Additionally, the VM occasionally will disable the secondary keyboard entirely, requiring me to unplug and replug it into my PC to re-enable it again. Keyboard auto-capture is disabled, and while a solution I was reading online stated to turn off mouse integration, that option is grayed out on my machine.

    Read the article

  • How to archive Exchange mailboxes remotely?

    - by amyassin
    We have an environment that is based on an Active Directory domain (running Windows Server 2003 SP2), an internal email system using Exchange Server 2003 (internal mailbox, nothing online), and the clients run a mixture of MS Outlook 2007&2010, with the majority running 2007. Recently we noticed that Exchange server is taking so much space for mailboxes. We are examining some solutions to reduce space, and it seems that we could make use of the archiving feature to archive older messages. I can set the auto-archive option manually for every individual user, but is there any other easier way to automate that task? Is there any feature in exchange server or active directory domain that enables setting that as a kind of policy or something similar, or a script to be scheduled to run by all users?

    Read the article

  • How do companies know they've been hacked?

    - by Chad
    With the news of Google and others getting hacked, I was wondering how companies find out, detect, and/or know they've been hacked in the first place? Sure, if they find a virus/trojan on user's computers or see a very high access rate to parts of their system that don't usually see much, if any, traffic. But, from what I've see in articles, the attack was pretty 'sophisticated', so I wouldn't imagine the hackers would make it so obvious of their hacking in the first place. Maybe someone can enlighten me on current detection schemes/heuristics. Thanks.

    Read the article

  • Outlook 2007 disconnecting after sending email to specific email

    - by Michael
    So when a user emails another tech in my domain they get the prompt for username/password as though they got disconnected. I have not seen any issues in the event logs, tried deleting the email address from his auto correct, ran Outlook in safe mode and searched online as well. I am kind of lost. Checked the event logs on the exchange server as well in the security and still nothing. Exchange 2010, Client OS: Vista x64, Outlook 2007. Thanks!

    Read the article

  • Windows 7: How to prevent Windows from caching my desktop wallpaper

    - by rmartz
    I have a service running that renders a changing wallpaper every 5 minutes or so, and replaces the current image file with the new one automatically (That is to say, new image but same filename). On Linux, the change is detected almost automatically, and so I have the most current wallpaper. However, on my Windows 7 machine (Which syncs the image with my Linux machine over Dropbox), it appears to cache the wallpaper from the last time I manually set the wallpaper. The image never changes, even if I restart. Is there a way to make Windows detect the file change, or periodically refresh the wallpaper cache? I'd like to avoid third-party apps if at all possible.

    Read the article

  • prevent OS X from prompting disk initialization/formatting

    - by Just-A-User.A-Superuser
    i have TrueCrypt partition, when i insert it in OS X, it always prompt me to initialize the hard disk. is there a way to prevent os x from detecting uninitialize hard disk? [UPDATE] by the way, as Truecrypt suggested while i'm in Windows, i must make partitions so the os won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while OS X thinks that it is still uninitialized. i think OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker

    Read the article

  • Does this sound like a stack overflow?

    - by Jordan S
    I think I might be having a stack overflow problem or something similar in my embedded firmware code. I am a new programmer and have never dealt with a SO so I'm not sure if that is what's happening or not. The firmware controls a device with a wheel that has magnets evenly spaced around it and the board has a hall effect sensor that senses when magnet is over it. My firmware operates the stepper and also count steps while monitoring the magnet sensor in order to detect if the wheel has stalled. I am using a timer interrupt on my chip (8 bit, 8057 acrh.) to set output ports to control the motor and for the stall detection. The stall detection code looks like this... // Enter ISR // Change the ports to the appropriate value for the next step // ... StallDetector++; // Increment the stall detector if(PosSensor != LastPosMagState) { StallDetector = 0; LastPosMagState = PosSensor; } else { if (PosSensor == ON) { if (StallDetector > (MagnetSize + 10)) { HandleStallEvent(); } } else if (PosSensor == OFF) { if (StallDetector > (GapSize + 10)) { HandleStallEvent(); } } } this code is called every time the ISR is triggered. PosSensor is the magnet sensor. MagnetSize is the number of stepper steps that it takes to get through the magnet field. GapSize is the number of steps between two magnets. So I want to detect if the wheel gets stuck either with the sensor over a magnet or not over a magnet. This works great for a long time but then after a while the first stall event will occur because 'StallDetector (MagnetSize + 10)' but when I look at the value of StallDetector it is always around 220! This doesn't make sense because MagnetSize is always around 35. So the stall event should have been triggered at like 46 but somehow it got all the way up to 220? And I don't set the value of stall detector anywhere else in my code. Do you have any advice on how I can track down the root of this problem? The ISR looks like this void Timer3_ISR(void) interrupt 14 { OperateStepper(); // This is the function shown above TMR3CN &= ~0x80; // Clear Timer3 interrupt flag } HandleStallEvent just sets a few variable back to their default values so that it can attempt another move... #pragma save #pragma nooverlay void HandleStallEvent() { ///* PulseMotor = 0; //Stop the wheel from moving SetMotorPower(0); //Set motor power low MotorSpeed = LOW_SPEED; SetSpeedHz(); ERROR_STATE = 2; DEVICE_IS_HOMED = FALSE; DEVICE_IS_HOMING = FALSE; DEVICE_IS_MOVING = FALSE; HOMING_STATE = 0; MOVING_STATE = 0; CURRENT_POSITION = 0; StallDetector = 0; return; //*/ } #pragma restore

    Read the article

  • Netgear Router missing Wireless Configuration Menu Link

    - by ccisystems
    I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

    Read the article

  • ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

    - by OtagoHarbour
    I have MySQL installed on Ubuntu 11.10. I has been working fine for months but yesterday I started getting the following message ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) and cannot get rid of it. I tried /etc/init.d/mysqld start and got bash: /etc/init.d/mysqld: No such file or directory The /etc/init.d/ directory contains mysql but not mysqld. I tried sudo service mysql restart It just hung for about half an hour and then I ctrl-C-ed it. I then tried sudo service mysql start I got mysql start/running But when I tried mysql I got ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I tried ps aux|grep mysql and got peter 17754 0.0 0.0 4196 768 pts/1 S+ 09:38 0:00 grep --color=auto mysql I ideas about fixing this problem would be most appreciated.

    Read the article

  • Ubuntu cannot access internet, LAN is fine

    - by Kevin Southworth
    I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

    Read the article

  • TightVNC (or any VNC) client windows scaling

    - by mr.b
    Hi, I am currently using TightVNC to connect to multiple remote hosts in LAN. I start 16 VNC instances, set Scaling by: Auto (in connection options display), set Hextile encoding, and then select all windows and use Tile Horizontally, which covers my entire screen with VNC screens. It all works sort of nice, except that desktop interaction is really slow when there are more then 4 VNC clients. My question is, does VNC client (not just TightVNC, but any compatible client) support some kind of smart scaling option, so that client tells server something along the lines of: "Okay, I'm displaying your entire screen in a window size 300x225 px, so can you please start sending encoded images on that resolution?", at which point interactiveness of open connections dramatically increase, and when I decide to go full screen on some connection, client and server re-negotiate and server starts sending full resolution images again? Thanks!!

    Read the article

  • Making fdisk see software RAID 0

    - by unknownthreat
    I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

    Read the article

  • Where can I configure wireless to be passed on to the Virtualbox guest?

    - by huahsin68
    I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

    Read the article

  • does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

    - by locuse
    i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

    Read the article

  • Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

    Read the article

  • Launching a file using ACTION_VIEW Intent Action

    - by Sneha
    I have the following code to launch a file : try { path = fileJsonObject.getString("filePath"); if (path.indexOf("/") == 0) { path = path.substring(1, path.length()); } path = root + path; final File fileToOpen = new File(path); if (fileToOpen.exists()) { if (fileToOpen.isFile()) { Intent myIntent = new Intent(android.content.Intent.ACTION_VIEW); myIntent.setData(Uri.parse(path)); final String pathToCheck = new String(path); pathToCheck.toLowerCase(); if (pathToCheck.endsWith(".wav") || pathToCheck.endsWith(".ogg") || pathToCheck.endsWith(".mp3") || pathToCheck.endsWith(".mid") || pathToCheck.endsWith(".midi") || pathToCheck.endsWith(".amr")) { myIntent.setType("audio/*"); } else if (pathToCheck.endsWith(".mpg") || pathToCheck.endsWith(".mpeg") || pathToCheck.endsWith(".3gp") || pathToCheck.endsWith(".mp4")) { myIntent.setType("video/*"); } else if (pathToCheck.endsWith(".jpg") || pathToCheck.endsWith(".jpeg") || pathToCheck.endsWith(".gif") || pathToCheck.endsWith(".png") || pathToCheck.endsWith(".bmp")) { myIntent.setType("image/*"); } else if (pathToCheck.endsWith(".txt") || pathToCheck.endsWith(".csv") || pathToCheck.endsWith(".xml")) { Log.i("txt","Text fileeeeeeeeeeeeeeeeeeeeeeeeee"); myIntent.setType("text/*"); } else if (pathToCheck.endsWith(".gz") || pathToCheck.endsWith(".rar") || pathToCheck.endsWith(".zip")) { myIntent.setType("package/*"); } else if (pathToCheck.endsWith(".apk")) { myIntent.setType("application/vnd.android.package-archive"); } ((Activity) context).startActivityForResult(myIntent, RequestCodes.LAUNCH_FILE_CODE); } else { errUrl = resMsgHandler.errMsgResponse(fileJsonObject, "Incorrect path provided. please give correct path of file"); return errUrl; } } else { errUrl = resMsgHandler.errMsgResponse(fileJsonObject,"Incorrect path provided. please give correct path of file"); return errUrl; } } catch (Exception e) { e.printStackTrace(); Log.i("err","Unable to launch file" + " " + e.getMessage()); errUrl = resMsgHandler.errMsgResponse(fileJsonObject, "Unable to launch file" + " " + e.getMessage()); return errUrl; } @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { // TODO Auto-generated method stub super.onActivityResult(requestCode, resultCode, data); try { if (requestCode == RequestCodes.LAUNCH_FILE_CODE) { if (resultCode == RESULT_CANCELED) { Log.i("err","errrrrrrrrrrrrrrrrrrrrrrrrrrrrrr"); String errUrl = responseMsgHandler.errMsgResponse(FileHandler.fileJsonObject, "Unable to launch file"); mWebView.loadUrl(errUrl); } else if (resultCode == RESULT_OK) { String successUrl = responseMsgHandler.launchfileResponse(FileHandler.fileJsonObject); mWebView.loadUrl(successUrl); } Amd the result ctrl is at "if (resultCode == RESULT_CANCELED)". So how to successfully launch this? May be in short i am doing this: final File fileToOpen = new File(path); if (fileToOpen.exists()) { if (fileToOpen.isFile()) { Intent myIntent = new Intent(android.content.Intent.ACTION_VIEW); myIntent.setData(Uri.parse(path)); if (pathToCheck.endsWith(".txt") || pathToCheck.endsWith(".csv") || pathToCheck.endsWith(".xml")) { Log.i("txt","Text fileeeeeeeeeeeeeeeeeeeeeeeeee"); myIntent.setType("text/*"); startActivityForResult(myIntent, RequestCodes.LAUNCH_FILE_CODE); and @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { // TODO Auto-generated method stub super.onActivityResult(requestCode, resultCode, data); if (requestCode == RequestCodes.LAUNCH_FILE_CODE) { if (resultCode == RESULT_CANCELED) { Log.i ("err","errrrrrrrrrrrrrrrrrrrrrrrrrrrrrr"); String errUrl = responseMsgHandler.errMsgResponse(FileHandler.fileJsonObject, "Unable to launch file"); mWebView.loadUrl(errUrl); } else if (resultCode == RESULT_OK) { String successUrl = responseMsgHandler.launchfileResponse(FileHandler.fileJsonObject); mWebView.loadUrl(successUrl); } My err log: 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.tf.thinkdroid.sstablet/com.tf.thinkdroid.write.editor.WriteEditorActivity}: java.lang.NullPointerException 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) ..... 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): Caused by: java.lang.NullPointerException 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): at com.tf.thinkdroid.common.app.TFActivity.storeDataToFileIfNecessary(Unknown Source) 04-04 10:53:57.077: ERROR/AndroidRuntime(6861): at com.tf.thinkdroid.common.app.TFActivity.onPostCreate(Unknown Source) ... Thanks Sneha

    Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >