Search Results

Search found 22900 results on 916 pages for 'pascal case'.

Page 240/916 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • Remote install of Ubuntu Server

    - by David Walker
    Hi all, I have a machine located 500 miles away that's running Ubuntu 8.04. I figure it's just about time that I upgrade to the latest LTS. However, there's a software raid (md_raid) in there, and I'm afraid that just a dist-upgrade when I switch over the sources.list will end with catastrophic failure. Like a panic on boot that the raid'd disk can't be read, or something else. First, hoping that's not the case, however, if it ends up happening I'm wondering if there's a means of having someone drop in a Ubuntu 10.04 server install disk, and flip on ssh, and some means for me to hop on and re-run the installer remotely. Is this feasible? If so, what would one need to do aside run apt-get install ssh on the target machine? I do have friends who can be in front of the target machine to initiate the process, just not execute it out.

    Read the article

  • Adding a comma to a resource name in Microsoft Project

    - by John Paul Cook
    Microsoft Project does not allow a comma to be added to a resource name. In healthcare, the norm is to refer to people using the pattern of Name, Title which in my case is John Cook, RN. Not all commas are equal. By substituting a different comma for the one Project doesn’t like, it’s possible to add a comma to a resource name. Figure 1. Error message after trying to add a comma to a resource name in Microsoft Project 2013. The error message refers to “the list separator character” that is commonly...(read more)

    Read the article

  • SSH'ing to my machine attaches an existing screen session and detaching it ends my SSH session

    - by jsplaine
    ssh'ing to my Ubuntu machine automatically attaches an existing screen session and detaching ends my ssh session What I want is to be able to ssh to my Ubuntu machine without automatically attaching to the screen session on that machine. Or at least, I should be able to to detach from that screen session w/o ending my ssh session .. right? Doesn't seem to work. This so that I can attempt to run firefox --display <whichever one is being forwarded to my ssh session>, so that I can debug a website that the remote Ubuntu machine is running (via localhost). Best case scenario is that I could just remote-desktop to my Ubuntu machine. But it's not set up to allow remote-desktop, and I see no way to set it up remotely via shell/ssh. Also, it sounds like you need a static IP in order to remote desktop to an Ubuntu machine (so I keep reading).

    Read the article

  • JS and CSS caching issue: possibly .htaccess related

    - by adamturtle
    I've been using the HTML5 Boilerplate for some web projects for a while now and have noticed the following issue cropping up on some sites. My CSS and JS files, when loaded by the browser, are being renamed to things like: ce.52b8fd529e8142bdb6c4f9e7f55aaec0.modernizr-1,o7,omin,l.js …in the case of modernizr-1.7.min.js The pattern always seems to add ce. or cc. in front of the filename. I'm not sure what's causing this, and it's frustrating since when I make updates to those files, the same old cached file is being loaded. I have to explicitly call modernizr-1.7.min.js?v=2 or something similar to get it to re-cache. I'd like to scrap it altogether but it still happens even when .htaccess is empty. Any ideas? Is anyone else experiencing this issue?

    Read the article

  • Best practices for managing deployment of code from dev to production servers?

    - by crosenblum
    I am hoping to find an easy tool or method, that allow's managing our code deployment. Here are the features I hope this solution has: Either web-based or batch file, that given a list of files, will communicate to our production server, to backup those files in different folders, and zip them and put them in a backup code folder. Then it records the name, date/time, and purpose of the deployment. Then it sends the files to their proper spot on the production server. I don't want too complex an interface to doing the deployment's because then they might never use it. Or is what I am asking for too unrealistic? I just know that my self-discipline isn't perfect, and I'd rather have a tool I can rely on to do what needs to be done, then my own memory of what exact steps I have to take every time. How do you guys, make sure everything get's deployed correctly, and have easy rollback in case of any mistakes?

    Read the article

  • Do we set the bar too high by requiring that code tests not suffer from buffer overflow?

    - by brice
    We are currently recruiting for a Junior Developer position working mainly in C on Linux. As part of the process, we require candidates to complete a code test at their leisure in C. So far we have rejected two candidates on the basis that their code, although readable and in one case rather idiomatic, suffered from buffer overflow errors due to unbounded buffer writes. Are buffer overflows acceptable from a graduate developer? Are we setting the bar too high? What is the expected capability of graduate/Junior engineers? [Edit]: We explicitly ask for error-checked, production quality code. We provide a test & build framework for the candidates

    Read the article

  • Problems with brother printer drivers on 64bit 12.04

    - by Jeff Klein
    I'm running 12.04 64bit on a toshiba satellite laptop. I have a Brotrher MFC-J825dw printer. I've installed brothers driver for it and the cupswrapper but it won't print. I says it is receiving data but it never shows up in the queue. I've also tried the text only generic driver and the same thing happens. I think some dependencies are missing for the cups wrapper and when I try to find it it says it can't be installed. Nopt sure if that's the problem because it doesn't explain the generic driver failure. In any case, any ideas?

    Read the article

  • Hold The Date: GlassFish Community Event and Party @ JavaOne 2012 - Sep 30

    - by arungupta
    A yearly tradition for the past 5 years (2007, 2008, 2009, 2010, 2011) is back again this year ... GlassFish Community Event is a gathering of GlassFish community members attending JavaOne. GlassFish Party is for everybody who are, or would like to be friends of GlassFish, in and around the San Francisco Bay Area. This year, again, both the events will be happening on the Sunday of JavaOne. The exact coordinates are a TBD but save the date while you are booking flights/hotels. GlassFish Community Event When: Sep 30, 11am - 1pm Where: TBD GlassFish Party When: Sep 30, 8pm - 10pm Where: The Thirsty Bear Note, a separate JavaOne registration is required to attend the community event. The party is open to everybody, and no JavaOne registration is required. RSVP details are still being worked upon and will be shared soon. 10 reasons to attend these events allows you to build your case with the management :-)

    Read the article

  • How to manage an issue tracker's backlog

    - by Josh Kelley
    We've been dutifully using Trac for several years now, and our "active tickets" list has grown to almost 200 items. These include bugs that are too low priority and too complicated to fix for now, feature requests that have been deferred, issues that have never really generated complaints but everyone agrees ought to be fixed someday, planned code refactorings and other design infelicities that we don't want to lose track of, etc. As a result, with almost 200 of these issues, the list is almost overwhelming; it's no longer useful as a source of what needs to be worked on right now. What's the best way to keep track of issues of this sort? Part of the problem is that some of these issues are such a low priority that they may never get done. I hate to lose track of these items (similar to not wanting to throw something out of my house in case I might need it someday); do I need to throw them out regardless (by marking them as wontfix) and assume I can find them in the future if I ever do need them?

    Read the article

  • WCF service and security

    - by Gaz83
    Been building a WP7 app and now I need it to communicate to a WCF service I made to make changes to an SQL database. I am a little concerned about security as the user name and password for accessing the SQL database is in the App.Config. I have read in places that you can encrypt the user name and password in the config file. As the username and password is never exposed to the clients connected to the WCF service, would security in my situation be much of a problem? Just in case anyone suggests a method of security, I do not have SSL on my web server.

    Read the article

  • Thunar not showing thumbnails in Openbox

    - by RanRag
    I am using openbox 3.5 and my file manager of choice is Thunar but the problem I am facing is thunar not showing thumbnails for folder,video files etc. My Thunar: You can see in the above image that thunar is not showing thumbnails for folders, files but it is showing for pdf and similar is the case for video files no thumbnails. So, what is wrong here am I missing some basic thunar config files. ranrag@ranrag:~$ echo $DESKTOP_SESSION openbox I looked into some forums and they mentioned that there is some dependency of tumbler with thunar but I have latest version of tumbler installed on my system. PS: I already tried thunar preferences but still no luck.

    Read the article

  • Make my website dynamically loaded data available to Facebook Open Graph Object Scrapper

    - by fvaliquette
    Here is the design of my web site: The user enter myWebsite.com/a/1 .htaccess rules redirect to myWebsite.com/b Now the JavaScript ExtJS library is loading. Extracting the value from the URL (in this case it is “1”) Loading ./xml/1.xml From 1.xml setting the Open Graph data (Title, type, image, etc) Loading data that will be shown to the user from 1.xml into the website. My question is: How can I make the Open Graph data available to Facebook? Facebook do not to load my ExtJS JavaScript Library before extracting the Open Graph Object values from the HTML. Is there an easy solution to this problem? The only solutions I found is to make statics web pages or dynamically pages rendered on the server side but I would like to avoid these since my web page implementation is already finished and I would like to avoid re working on it.

    Read the article

  • Web developer has become uncooperative, what should we do to rescue our site? [closed]

    - by TOM
    What can an individual or a company do if the web designer who has designed their website becomes completely uncooperative? In our case He refuses to meet with us for discussions. He refuses to give us training on the effective use and management of the website he has designed for us (and has been paid in full for) despite this training being part of the original contract. Last year he disappeared for a number of months ,refused to answer emails or phobe calls and was totally unavailable to help us He refuses to give us the details of the hosting of our website. We have totally lost faith in this arrogant and unreasonable guy and would like to break off all relationships with him but ,it appears, he's got us over a barell

    Read the article

  • Finding right bug tracker web application

    - by FullmetalBoy
    I'm looking for a bug tracking system (similiar as http://www.mantisbt.org) with these following requirements: Requirement specifications are: Upload picture and different files without any limitaton of the file's space. If user belong to a specific group or businesss group, the GUI:s logotype should be changed into group's logotype after the user has entered user name and password. All user use the same database with different GUI. Right information of unassigned, modified and resolved bug case will be displayed based on what group or business group that the user is assigned to. All information will display after the user has logged in. Enable to create 1 or more super user (administrator) and regular user. Right user with right group or business group will retrieve right information. Non functional requirement: The bugging tracker take place in a webbapplication. All information must use web browser to view all information.

    Read the article

  • InnoDB Compression Improvements in MySQL 5.6

    - by Inaam Rana
    MySQL 5.6 comes with significant improvements for the compression support inside InnoDB. The enhancements that we'll talk about in this piece are also a good example of community contributions. The work on these was conceived, implemented and contributed by the engineers at Facebook. Before we plunge into the details let us familiarize ourselves with some of the key concepts surrounding InnoDB compression. In InnoDB compressed pages are fixed size. Supported sizes are 1, 2, 4, 8 and 16K. The compressed page size is specified at table creation time. InnoDB uses zlib for compression. InnoDB buffer pool will attempt to cache compressed pages like normal pages. However, whenever a page is actively used by a transaction, we'll always have the uncompressed version of the page as well i.e.: we can have a page in the buffer pool in compressed only form or in a state where we have both the compressed page and uncompressed version but we'll never have a page in uncompressed only form. On-disk we'll always only have the compressed page. When both compressed and uncompressed images are present in the buffer pool they are always kept in sync i.e.: changes are applied to both atomically. Recompression happens when changes are made to the compressed data. In order to minimize recompressions InnoDB maintains a modification log within a compressed page. This is the extra space available in the page after compression and it is used to log modifications to the compressed data thus avoiding recompressions. DELETE (and ROLLBACK of DELETE) and purge can be performed without recompressing the page. This is because the delete-mark bit and the system fields DB_TRX_ID and DB_ROLL_PTR are stored in uncompressed format on the compressed page. A record can be purged by shuffling entries in the compressed page directory. This can also be useful for updates of indexed columns, because UPDATE of a key is mapped to INSERT+DELETE+purge. A compression failure happens when we attempt to recompress a page and it does not fit in the fixed size. In such case, we first try to reorganize the page and attempt to recompress and if that fails as well then we split the page into two and recompress both pages. Now lets talk about the three major improvements that we made in MySQL 5.6.Logging of Compressed Page Images:InnoDB used to log entire compressed data on the page to the redo logs when recompression happens. This was an extra safety measure to guard against the rare case where an attempt is made to do recovery using a different zlib version from the one that was used before the crash. Because recovery is a page level operation in InnoDB we have to be sure that all recompress attempts must succeed without causing a btree page split. However, writing entire compressed data images to the redo log files not only makes the operation heavy duty but can also adversely affect flushing activity. This happens because redo space is used in a circular fashion and when we generate much more than normal redo we fill up the space much more quickly and in order to reuse the redo space we have to flush the corresponding dirty pages from the buffer pool.Starting with MySQL 5.6 a new global configuration parameter innodb_log_compressed_pages. The default value is true which is same as the current behavior. If you are sure that you are not going to attempt to recover from a crash using a different version of zlib then you should set this parameter to false. This is a dynamic parameter.Compression Level:You can now set the compression level that zlib should choose to compress the data. The global parameter is innodb_compression_level - the default value is 6 (the zlib default) and allowed values are 1 to 9. Again the parameter is dynamic i.e.: you can change it on the fly.Dynamic Padding to Reduce Compression Failures:Compression failures are expensive in terms of CPU. We go through the hoops of recompress, failure, reorganize, recompress, failure and finally page split. At the same time, how often we encounter compression failure depends largely on the compressibility of the data. In MySQL 5.6, courtesy of Facebook engineers, we have an adaptive algorithm based on per-index statistics that we gather about compression operations. The idea is that if a certain index/table is experiencing too many compression failures then we should try to pack the 16K uncompressed version of the page less densely i.e.: we let some space in the 16K page go unused in an attempt that the recompression won't end up in a failure. In other words, we dynamically keep adding 'pad' to the 16K page till we get compression failures within an agreeable range. It works the other way as well, that is we'll keep removing the pad if failure rate is fairly low. To tune the padding effort two configuration variables are exposed. innodb_compression_failure_threshold_pct: default 5, range 0 - 100,dynamic, implies the percentage of compress ops to fail before we start using to padding. Value 0 has a special meaning of disabling the padding. innodb_compression_pad_pct_max: default 50, range 0 - 75, dynamic, the  maximum percentage of uncompressed data page that can be reserved as pad.

    Read the article

  • 500 error on Joolma website

    - by Rachel Sparks
    PHP Fatal error: Call to a member function setQuery() on a non-object in /home/josh/public_html/administrator/components/com_jfusion/plugins/phpbb3/forum.php on line 226 Just moved over to a new server. Anyone have ideas as to what is wrong? Is this a database issue? line 226: //get permissions for all forums in case more than one module/plugin is present with different settings $db = & JFusionFactory::getDatabase($this->getJname()); $query = "SELECT forum_id FROM #__forums WHERE forum_type = 1 ORDER BY left_id"; $db->setQuery($query); //226 $forumids = $db->loadResultArray();

    Read the article

  • How to ensure apache2 reads htaccess for custom expiry?

    - by tzot
    I have a site with Apache 2.2.22 . I have enabled the mod-expires and mod-headers modules seemingly correctly: $ apachectl -t -D DUMP_MODULES … expires_module (shared) headers_module (shared) … Settings include: ExpiresActive On ExpiresDefault "access plus 10 minutes" ExpiresByType application/xml "access plus 1 minute" Checking the headers of requests, I see that max-age is set correctly both for the generic case and for xml files (which are auto-generated, but mostly static). I would like to have different expiries for xml files in a directory (e.g. /data), so http://site/data/sample.xml expires 24 hours later. I enter the following in data/.htaccess: ExpiresByType application/xml "access plus 24 hours" Header set Cache-control "max-age=86400, public" but it seems that apache ignores this. How can I ensure apache2 uses the .htaccess directives? I can provide further information if requested.

    Read the article

  • Is it safe to block redirected (but still linked) URLs with robots.txt?

    - by Edgar Quintero
    I have a website that has all URLs optimized and 301 redirected from nasty URLs to clean ones. However, everywhere throughout the site the unclean URLs are linked in menus, content, products, etc. Google currently has all clean URLs indexed, along with a few unclean URLs too. So the site still has linked everywhere the old URLs (ideally this wouldn't be the case but this is how it is ATM). I would like to block the unclean URLs with robots.txt. The question: if I block these unclean URLs with the robots.txt, when the entire website is linked with them (but they all redirect to the clean version), will this affect the indexing status at all?

    Read the article

  • How to convincing Programmers that 'being in the zone' [coding] isn't always beneficial for the project?

    - by hawkeye
    In this book review: http://books.slashdot.org/story/11/06/13/1251216/Book-Review-The-Clean-Coder?utm_source=slashdot&utm_medium=twitter Chapter 4 talks about the coding process itself. One of the hardest statements the book makes here is to stay out of "the zone" when coding. Bob asserts that you lose parts of the big picture when you go down to that level. While I may struggle with that assertion, I do agree with his next statement that debugging time is expensive, so you should avoid having to do debugger-driven development whenever possible. He finishes the chapter with examples of pacing yourself (walking away, taking a shower) and how to deal with being late on your projects (remembering that hope is not a plan, and being clear about the impact of overtime) along with a reminder that it is good to both give and receive help, whether it be small questions or mentoring others. they talk about how 'being in the zone' - can actually be detrimental to the project. How do you convince your team members that this is the case?

    Read the article

  • Electronic circuit simulator four-way flood-filling issues

    - by AJ Weeks
    I've made an electronic circuit board simulator which has simply 3 types of tiles: wires, power sources, and inverters. Wires connect to anything they touch, other than the sides of inverters; inverters have one input side and one output side; and finally power tiles connect in a similar manner as wires. In the case of an infinite loop, caused by the output of the inverter feeding into its input, I want inverters to oscillate (quickly turn on/off). I've attempted to implement a FloodFill algorithm to spread the power throughout the grid, but seem to have gotten something wrong, as only the tiles above the power source get powered (as seen below) I've attempted to debug the program, but have had no luck thus far. My code concerning the updating of power can be seen here.

    Read the article

  • How many developers before continuous integration becomes effective for us?

    - by Carnotaurus
    There is an overhead associated with continuous integration, e.g., set up, re-training, awareness activities, stoppage to fix "bugs" that turn out to be data issues, enforced separation of concerns programming styles, etc. At what point does continuous integration pay for itself? EDIT: These were my findings The set-up was CruiseControl.Net with Nant, reading from VSS or TFS. Here are a few reasons for failure, which have nothing to do with the setup: Cost of investigation: The time spent investigating whether a red light is due a genuine logical inconsistency in the code, data quality, or another source such as an infrastructure problem (e.g., a network issue, a timeout reading from source control, third party server is down, etc., etc.) Political costs over infrastructure: I considered performing an "infrastructure" check for each method in the test run. I had no solution to the timeout except to replace the build server. Red tape got in the way and there was no server replacement. Cost of fixing unit tests: A red light due to a data quality issue could be an indicator of a badly written unit test. So, data dependent unit tests were re-written to reduce the likelihood of a red light due to bad data. In many cases, necessary data was inserted into the test environment to be able to accurately run its unit tests. It makes sense to say that by making the data more robust then the test becomes more robust if it is dependent on this data. Of course, this worked well! Cost of coverage, i.e., writing unit tests for already existing code: There was the problem of unit test coverage. There were thousands of methods that had no unit tests. So, a sizeable amount of man days would be needed to create those. As this would be too difficult to provide a business case, it was decided that unit tests would be used for any new public method going forward. Those that did not have a unit test were termed 'potentially infra red'. An intestesting point here is that static methods were a moot point in how it would be possible to uniquely determine how a specific static method had failed. Cost of bespoke releases: Nant scripts only go so far. They are not that useful for, say, CMS dependent builds for EPiServer, CMS, or any UI oriented database deployment. These are the types of issues that occured on the build server for hourly test runs and overnight QA builds. I entertain that these to be unnecessary as a build master can perform these tasks manually at the time of release, esp., with a one man band and a small build. So, single step builds have not justified use of CI in my experience. What about the more complex, multistep builds? These can be a pain to build, especially without a Nant script. So, even having created one, these were no more successful. The costs of fixing the red light issues outweighed the benefits. Eventually, developers lost interest and questioned the validity of the red light. Having given it a fair try, I believe that CI is expensive and there is a lot of working around the edges instead of just getting the job done. It's more cost effective to employ experienced developers who do not make a mess of large projects than introduce and maintain an alarm system. This is the case even if those developers leave. It doesn't matter if a good developer leaves because processes that he follows would ensure that he writes requirement specs, design specs, sticks to the coding guidelines, and comments his code so that it is readable. All this is reviewed. If this is not happening then his team leader is not doing his job, which should be picked up by his manager and so on. For CI to work, it is not enough to just write unit tests, attempt to maintain full coverage, and ensure a working infrastructure for sizable systems. The bottom line: One might question whether fixing as many bugs before release is even desirable from a business prespective. CI involves a lot of work to capture a handful of bugs that the customer could identify in UAT or the company could get paid for fixing as part of a client service agreement when the warranty period expires anyway.

    Read the article

  • Should I implement slugs with my already fairly long URLs?

    - by Earlz
    I'm considering implementing slugs in my blog. My blog uses MongoDB. One of the side-effects of using MongoDB is that it uses relatively long hex string IDs. Example before: http://lastyearswishes.com/blog/view/5070f025d1f1a5760fdfafac after: http://lastyearswishes.com/blog/view/5070f025d1f1a5760fdfafac/improvements-on-barelymvc Of course, that's a relatively short title.. I have some longer ones, but intend to limit the maximum character limit for slugs to something reasonable. At what point does a URL become so long that it hurts SEO instead of improves it? In this case, should I leave my URLs alone, or add slugs?

    Read the article

  • "AND Operator" in PAM

    - by d_inevitable
    I need to prevent users from authenticating through Kerberos when the encrypted /home/users has not yet been mounted. (This is to avoid corrupting the ecryptfs mountpoint) Currently I have these lines in /etc/pam.d/common-auth: auth required pam_group.so use_first_pass auth [success=2 default=ignore] pam_krb5.so minimum_uid=1000 try_first_pass auth [success=1 default=ignore] pam_unix.so nullok_secure try_first_pass I am planning to use pam_exec.so to execute a script that will exit 1 if the ecyptfs mounts are not ready yet. Doing this: auth required pam_exec.so /etc/security/check_ecryptfs will lock me out for good if ecryptfs for some reason fails. In such case I would like to at least be able to login with a local (non-kerberos) user to fix the issue. Is there some sort of AND-Operator in which I can say that login through kerberos+ldap is only sufficient if both kerberos authentication and the ecryptfs mount has succeeded?

    Read the article

  • What is "umask" and how does it work?

    - by Lekensteyn
    I believe that umask is something that controls file permissions, but do not fully understand it. After running umask 0644 in a terminal, I cannot read the files I create with the command-line text editor nano. I noticed that the permissions of that file are set to 0022 instead of the default 0755. How does umask work? I thought I could just remove the each digit in the umask from 0777, 7 - 6 = 1 and 7 - 4 = 3, so I expect the permissions to be 0133, but apparently, this is not the case. What is umask exactly? Explain it to me like I was a "Linux noob" How do I calculate with umask? What are use cases for umask?

    Read the article

  • Are there well-known PowerShell coding conventions?

    - by Tahir Hassan
    Are there any well-defined conventions when programming in PowerShell? For example, in scripts which are to be maintained long-term, do we need to: Use the real cmdlet name or alias? Specify the cmdlet parameter name in full or only partially (dir -Recurse versus dir -r) When specifying string arguments for cmdlets do you enclose them in quotes (New-Object 'System.Int32' versus New-Object System.Int32 When writing functions and filters do you specify the types of parameters? Do you write cmdlets in the (official) correct case? For keywords like BEGIN...PROCESS...END do you write them in uppercase only? It seems that MSDN lack coding conventions document for PowerShell, while such document exist for example for C#.

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >