Search Results

Search found 137626 results on 5506 pages for 'linked lists using c'.

Page 244/5506 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Using OSX home directories from linux

    - by Steffen
    I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

    Read the article

  • Suddenly get "apt-get: symbol lookup error" when using apt-get

    - by marue
    I have no idea what has gone wrong here. I have installed the audiotool sox, then tried to install the library libsox-fmt-all and all of a sudden apt-get refused to work. I cannot use it now, neither to update nor to install anything. Could somebody suggest what i could do to get it back to work? Here is the complete message it throws: apt-get: symbol lookup error: /usr/lib/libstdc++.so.6: undefined symbol: _ZNSt7num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4

    Read the article

  • apache using mod_auth_kerb always asks for the password twice

    - by DrStalker
    (Debian Squeeze) I'm trying to set apache up to use Kerberos authentication to allow AD users to log in. It is working, but prompts the user twice for a username and password, with the first time being ignored (no matter what is put it in.) Only the second prompt includes the AuthName string from the config (i.e.: the first windows is a generic username/password one, the second includes the title "Kerberos Login") I'm not worried about integrated windows authentication working at this stage, I just want users to be able to login with their AD account so we don't need to set up a second repository of user accounts. How do I fix this to eliminate that first useless prompt? The directives in the apache2.conf file: <Directory /var/www/kerberos> AuthType Kerberos AuthName "Kerberos Login" KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms ONEVUE.COM.AU.LOCAL Krb5KeyTab /etc/krb5.keytab KrbServiceName HTTP/[email protected] require valid-user </Directory> krb5.conf: [libdefaults] default_realm = ONEVUE.COM.AU.LOCAL [realms] ONEVUE.COM.AU.LOCAL = { kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL master_kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL admin_server = SYD01PWDC01.ONEVUE.COM.AU.LOCAL default_domain = ONEVUE.COM.AU.LOCAL } [login] krb4_convert = true krb4_get_tickets = false The access log when accessing the secured directory (note the two seperate 401's) 192.168.10.115 - - [24/Aug/2012:15:52:01 +1000] "GET /kerberos/ HTTP/1.1" 401 710 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - - [24/Aug/2012:15:52:06 +1000] "GET /kerberos/ HTTP/1.1" 401 680 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - [email protected] [24/Aug/2012:15:52:10 +1000] "GET /kerberos/ HTTP/1.1" 200 375 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" And one line in error.log [Fri Aug 24 15:52:06 2012] [error] [client 192.168.0.115] gss_accept_sec_context(2) failed: An unsupported mechanism was requested (, Unknown error)

    Read the article

  • Mac OS X: Trying to install prolog using fink

    - by sixtyfootersdude
    I am trying to install prolog on Mac OS X 10.4.11. I just downloaded fink because I think that that should help me and I am trying to get either: Package swi-prolog-5.8.1-2 or Package gprolog-1.3.1-1 But I am not having any luck. Here is what I was doing: % fink install swi-prolog-5.8.1-2 Information about 1723 packages read in 0 seconds. Failed: no package found for specification 'swi-prolog-5.8.1-2'! % Question 1: Are these what I want to download? Question 2: Why isn't fink working?

    Read the article

  • Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

    - by user26453
    I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

    Read the article

  • Recover open but deleted file on Linux using ln instead of cp

    - by Yang
    Say I have a file that's downloading (from a source that's hard to re-download from), but accidentally deleted from the filesystem namespace (/tmp/blah), and I'd like to recover this file. Normally I could just cp /proc/$PID/fd/$FD /tmp/blah, but in this case that would only get me a partial snapshot, since the file is still downloading. Furthermore, once the download completes, the downloading process (e.g. Chrome) will close the FD. Any way to recover by inode/create a hard link? Any other solutions? If it makes any difference, I'm mainly concerned with ext4. Thanks in advance.

    Read the article

  • Accessing internal server eg 192.168.10.10 without using remote desktop

    - by bergin
    Hi there My boss has an intranet he wants his employees to gain access to from the WWW. Theres a sharepoint server running on 192.168.10.10 and SBS can be seen from a website 81.244.232.22 (some numbers like this). When you access, theres a default internal sharepoint site "companyweb" but we dont want to use that we want the main sharepoint site which has all the business on it. is this possible? Currently we have to connect to a computer, chose the server and then get in that way. Any ideas?

    Read the article

  • Accessing internal server eg 192.168.10.10 without using remote desktop

    - by bergin
    Hi there My boss has an intranet he wants his employees to gain access to from the WWW. Theres a sharepoint server running on 192.168.10.10 and SBS can be seen from a website 81.244.232.22 (some numbers like this). When you access, theres a default internal sharepoint site "companyweb" but we dont want to use that we want the main sharepoint site which has all the business on it. is this possible? Currently we have to connect to a computer, chose the server and then get in that way. Any ideas?

    Read the article

  • What are the benefits of using conforming certificates?

    - by zneak
    Recently, my web host started sending my mail client a self-signed root certificate with no field filled (everything says "Unknown") when connecting via SSL. I'm pretty sure this is not a good thing, but since it works, the tech support guy says it's fine. I'm not a certificate guru, so I'm turning to you people. What purpose do certificates serve? Is it really okay that the certificate has every field set to "Unknown"? I don't check certificates often, but I don't recall ever being sent a root one; what's the difference between a root certificate and, err, the other kind of certificate?

    Read the article

  • Kerberos: Running an app with a parameter using krenew

    - by Mihai Todor
    I need to run an application with krenew, but the application also needs to receive a parameter via command line and I need to send its output to a file. From the documentation, it looks like this should do the trick: krenew -t -- sh -c 'compute-job > /afs/local/data/output' but, unfortunately, when I run the command below: krenew -s -- sh -c './my_app config.xml > results/test.txt &' the application just dies after a while and I can see from the output of ps aux that krenew is not running along with my_app. I am not sure what the parameter -t does, and as far as I can see, if I run krenew -s ./my_app, it works properly. I hope someone can clarify this.

    Read the article

  • how to connect to server continuously using an bad internet connetion

    - by Nikhil
    I have a bad Internet connection, it disconnects frequently and on reconnect, I'm assigned a different IP address by the ISP. The problem is that I connect to a remote VPS (Ubuntu), and when Internet connection is disrupted n reconnected, I can no longer do anything on the terminal. I have to restart the terminal and re-initiate the connection. Is there a way I can have persistent connection with server.

    Read the article

  • Using WebDAV for automated downloads

    - by Geo Ego
    I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

    Read the article

  • Removed password from Windows 7, now I cannot login using Remote Desktop

    - by Niels Brinch
    I removed the password from the only account on my Windows 7 computer and now I get the following message when I try to log in. "Possible reasons are blank passwords not allowed". I did some research and found out what I should have done (disable the policy to allow blank passwords) but now I'm already logged out and cannot get back in. Does anyone have any suggestions? Update Thanks for all the answers. I actually think the reason I couldn't login with blank password was because I was logging in with Remote Desktop. I had no idea that made a difference, so didn't think it would be relevant to mention. When I went directly on the physical computer, it did not stop me from logging in without a password.

    Read the article

  • Windows : Map-a-network-drive to a remote Shared-Folder (on QNAP NAS) using OpenVPN

    - by spelltox
    Provided my lack of networking knowledge, I've been struggling with this issue for quite a few days now : I have a QNAP-TS212 NAS on which i've created a shared-folder (mostly excel files). All the computers in the local network (windows) are able to access it without any problem. Now, i want to access that shared-folder remotely (windows client), so : I enabled OpenVPN (and PPTP) in QNAP admin. Installed OpenVPN on the remote client. Applied the configuration file that the QNAP generated - Configuration (openvpn.ovpn) : client dev tun script-security 3 proto udp remote ***MY_WAN_IP*** 1194 resolv-retry infinite nobind ca ca.crt auth-user-pass reneg-sec 0 cipher AES-128-CBC comp-lzo OpenVPN connect successfully from the remote client. Now, here's my problem : I can ping the NAS (got IP 10.8.0.1) from the remote client, But when i try to map-a-network-drive, i don't see the shared folder or the NAS or any of the other computers in the network... I checked - all computers are in "WORKGROUP" workgroup. I'm probably missing some basic knowledge, So - any help would be greatly appreciated ! Many thanks.

    Read the article

  • Using two Cisco Aironet 1100's

    - by daniel
    Is it possible to use two of these both providing connectivity to the same network name for additional signal by having one plugged into a hot data port and having the other only powered by the AC? It seems to have worked for one day, then it stopped and I have the middle light blinking, and the other "hot" one solid in the middle and flashing rapidly on the last light.

    Read the article

  • Using symbolic link in Windows XP

    - by Stan
    Junction is a good symbolic link tool in XP. However, it's not so easy to use at first moment, ie. only can use command line interface; move/rename target file/folder; got to use 'junction -d ' to delete link, don't allow delete in explore, but it's hard to distinguish if it's a symbolic link. Is there any guides for how to use junction in XP like what to do and not to do?

    Read the article

  • Convert video files for Maemo (Nokia N900) using ffmpeg/mencoder

    - by Vikrant Chaudhary
    I'm a newbie in video encoding so I'm looking for some expert advice. I'm looking to transcode media files with ffmpeg or mencoder (or something other) on Ubuntu for my Nokia N900 running Maemo. I'd prefer mencoder, because of ffmpeg's crazy dependencies. Video output should be AVC/H.264 (probably hardware accelerated on device). Audio output in AAC (should have preferred Vorbis but not supported natively and requires .mkv which is also not completely supported). Output video should retain the original aspect ratio. Resolution of screen is 800x480 (16:10). (Explanation of why-this-value-is-chosen would be really appreciated). Thanks.

    Read the article

  • Enabling NAT forwarding using a second WAN interface and a second gateway on ubuntu

    - by nixnotwin
    I have 3 interfaces: eth0 192.168.0.50/24 eth1 10.0.0.200/24 eth2 225.228.123.211 The default gateway is 192.168.0.1 which I want to keep as it is in the changes I want to make. I want to masquerade eth1 10.0.0.200/24 and enable NAT forwarding to eth2. So I have done this: ip route add 225.228.123.208/29 dev eth2 src 225.228.123.211 table t1 ip route add default via 225.228.123.209 dev eth2 table t1 ip rule add from 225.228.123.211 table t1 ip rule add to 225.228.123.211 table t1 Now I can receive ping replies from any internet host if I did: ping -I eth2 8.8.8.8 To enable NAT forwarding I did this: sudo iptables -A FORWARD -o eth2 -i eth1 -s 10.0.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE But it isn't working. To test I used a client pc and put it on 10.0.0.0/24 network and gateway was set as 10.0.0.200. I want to have 192.168.0.1 as default gateway. And the traffic that comes in via eth1 10.0.0.200/24 should be forwarded to eth2 225.228.123.211. I have enabled forwarding on ubuntua also.

    Read the article

  • Slight delay when switching modes in vim using tmux or screen

    - by Ton van den Heuvel
    Switching to and from insert mode in Vim is no longer instantaneous since I use tmux. After pressing Esc in insert mode, it takes a noticeable amount of time to actually get out of insert mode. After pressing Esc and any other key afterwards the switch is immediate, and the command for the key pressed after Esc is executed. Any idea what might cause this? The Vim configuration is not the problem as the delay does not occur when I run Vim outside tmux, so this is probably related to tmux somehow. I use gnome-terminal btw. Also worth noting, it seems I can not define key bindings in tmux for Esc, my plan was to bind Esc to: bind Escape send-keys ^[ Alas, it seems binding anything to Esc for tmux does not work. The same problem occurs in screen as well.

    Read the article

  • Automated capturing of screen using "Microsoft Expression Encoder Screen Capture" command line operations

    - by gentlesea
    I want to capture screen output automatically from within my TestComplete test program. For this i found the free limited version of "Microsoft Expression Encoder Screen Capture" which I want to automate. Is there a separate command line interface for Microsoft Expression Encoder Screen Capture or do I have to use the command line interface for Expression Studio? I found this options: http://msdn.microsoft.com/en-us/library/cc294683.aspx. But before I dig deeper, I want to know if I am on the right way.

    Read the article

  • GWT: Generate more complete crawl error report

    - by Mike
    I'm a developer in charge of managing Webmasters and related issues (including correcting crawl errors) for dozens (hundreds, maybe?) of active sites and as part of my duties I create a report of every discrepancy, including all pages generating a 404 and all pages that link to those pages. Currently within Webmaster Tools I'm able to download a csv file of all pages with a 404 response, but I'm then having to manually click on every single one of those links and copy the "linked from" field to paste into my spreadsheet. This is extremely tedious and seems unnecessary; I would expect the ability to download all that data at once. I'm ultimately looking for the end result of one csv file that has every url with a 404, but also has every url that links to each one of them. Am I overlooking this functionality somewhere or does anyone have a good solution? Edit 1 (2/11/2013): Example of what the csv output looks like now: URL,Response Code,News Error,Detected,Category http://www.abcdef.com/123.php,404,,11/12/13,Not found http://www.abcdef.com/456.php,404,,11/12/13,Not found Which is great, but let's say 123.php has 5 pages that link to it. Now I have to duplicate that row in my spreadsheet 4 more times, then go into Webmasters, get all the url's that link to the page, and add that data to my spreadsheet. The output I would prefer: URL,Response Code,Linked From,News Error,Detected,Category http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found Note the (hypothetical) addition of a "Linked From" column, as well as the fact there are only 2 unique URL's now (like before) but all of the "Linked To" pages are shown in one report. Edit 2 (2/12/2013): To clarify, my question is less about detecting and correcting 404's, but more about generating a report of what Google has listed as errors. Oftentimes, these errors aren't even valid anymore but I still need documentation to show that Google detected a problem and that problem is now fixed. Many of the "linked from" url's I find are actually outdated, cached resources. For example, I'll frequently see that the linked-from url is the sitemap, which is actually an old sitemap cached by Google that points to an old page. Neither the sitemap or old page exist, but they still appear in my crawl error reports because they are cached resources.

    Read the article

  • Creating Routes using the second NIC in the box

    - by Aditya Sehgal
    OS: Linux I need some advice on how to set up the routing table. I have a box with two physical NIC cards eth0 & eth1 with two associated IPs IP1 & IP2 (both of the same subnet). I need to setup a route which will force all messages from IP1 towards IP3 (of the same subnet) to go via IP2. I have a raw socket capture program listening on IP2 (This is not for malicious use). I have set up the routing table as Destination Gateway Genmask Flags Metric Ref Use Iface IP3 IP2 255.255.255.255 UGH 0 0 0 eth1 If I try to specify eth0 while adding the above rule, I get an error "SIOCADDRT: Network is unreachable". I understand from the manpage of route that if the GW specified is a local interface, then that would be use as the outgoing interface. After setting up this rule, if i do a traceroute (-i eth0), the packet goes first to the default gateway and then to IP3. How do I force the packet originating from eth0 towards IP3 to first come to IP2. I cannot make changes to the routing table of the gateway. Please suggest.

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >