Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 245/361 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

• OS X server VPN local ip

  - by gbrandt

  Hi all, I have 10.6.2 server on the internet. I want to vpn into it to get access. I start VPN and it gives me an address in the range I have set 192.168.2.100-192.168.2.105. However the server itself does not have a local ip of 192.168.2.x so I cannot ping it or ssh into it or anything. The machine VPNing gets an ifconfig entry that looks like this: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 70.72.xxx.xxx netmask 0xffffff00 Where I think it should get: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 192.168.2.1 netmask 0xffffff00 I can't find anywhere to set the local vpn IP address. And I can't find a pptpd.conf file either. Any help is appreciated.

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• SMS Gateway Suggestions Needed

  - by SidC

  Hi All, Our website is written using PHP and is powered by a hosted Linux web server. We want to allow our users to receive SMS messages when they've received intranet-site messages from fellow users - SMS Notification. What is required to implement this functionality? Are there open source (free?) server applications that address this? Do we need to contract with wireless carriers to send messages to their networks? What, if any fees, must be paid to them? Thanks, Sid

  Read the article

• Run shell command with variable in filename via Python

  - by rajitha

  I have files with naming convention st009_out.abc1.dat st009_out.abc2.dat st009_out.abc3.dat .................. .................. I am writing Python code where I want to use data from the file to perform a math function and need to extract the second column from the file. I have tried it this way: for k in range(1,10): file1=open('st009_out.abc'+str(k)+'.dat','r') ........... os.system("awk '{print $2}' st009_out.abc${k}.pmf > raj.dat") but this is not working as it is not taking the value of k in the shell command. How do I progress?

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

  - by tlianza

  I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• What's the best way to block IP spoofing on a layer 3 switch?

  - by toupeira

  We're hosting Dedicated Servers and are currently using old 3com switches with IP-based ACLs. So each port has an ACL that allows all IP addresses assigned to this customer, and blocks everything else. But now 3com was bought by HP, and the follow-up model only supports basic ACL that aren't flexible enough to both allow certain IPs while blocking others. Looking at other switches in a similar price-range, we've found that most of them have similar problems or don't offer any ACL features at all. I assume this could also somehow be done with VLANs, but if I understand this correctly we'd still need some kind of ACL to actually specify the valid IP addresses for each port. What do you use to make sure your customers don't use unassigned IP addresses? Or what switches can you recommend that have flexible ACL functionality?

  Read the article

• Connecting to Aerohive AP's from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• Why does Snow Leopard report incorrect battery levels for Bluetooth input devices after switching them to Apple rechargeable batteries?

  - by GeneQ

  I have a Magic Trackpad, Magic Mouse and the Apple Wireless keyboard. They work fine. Two days ago, doing my part for the environment, I changed all their batteries to Apple rechargeable batteries. Today I noticed that the battery level meter for all three devices report the wrong battery level. The trackpad reports 93% charge, the keyboard 75% charge and the mouse 65% charge. This can't be right; these are fully charged new batteries. They can't possible drop that much within 48 hours. Has anyone else encountered this problem? And are there any solutions?

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Looking for temporal upsampling software

  - by timday

  I'm looking for something (prereably FOSS software) which can take an animation with N images as input, and which will output an animation with M frames, where M is in the range 2N to 5N or so. I believe the general technique is called "temporal upsampling" or possibly "inbetweening" (or "'tweening" for short). Note that it does need to make some effort to do motion tracking of things in the scene ("optical flow"); just fading ("dissolve") between keyframes isn't going to cut it. Googling "temporal upsampling" turns up any number of papers on the subject, but I've yet to discover any code/software I can just use to try the technique out. Any suggestions ?

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• Nested IF statement on Google Spreadsheet, second part same as the first [migrated]

  - by lazfish

  I have a spreadsheet for my budget. Payments are either drawn from my bank or my Amex card and then my Amex card is drawn from my bank as well. So I add up all my monthly total like this: =sumif(I3:I20,"<>AMEX",D3:D20) Where I3:I20 = account bill is paid from and D3:D20 is monthly amount due. So I am not including bills that come from my Amex card in the total since the Amex bill itself covers those. Next I have a column that has the day of the month 1-10 (when everything gets paid) and it does this: =sumif(H3:H20,E24:E33,D3:D20) Where H3:H20 = date bill is paid and E25:E35 = range from 1-10. What I want to do is make this second part do the same check as the first. Something like this: =sumif(H3:H19,E24:E33,IF(I3:I19"<>SPG",D3:D19,0)) But I get error: "Parse error" What am I doing wrong?

  Read the article

• What video codecs have most amount of content and thus popular at present/in future?

  - by goldenmean

  Hi, I want to find out if I can get some data on the percentage wise distribution of video content, for different video codecs currently used for video encoding. I know there are different applications/use-case scenarios which have different encoder used but i want to consdier all that and have a overall usage number(%) My guess is(highest to lowest % of content) - H.264(AVC) DivX MPEG2 VP6 Where do H.263, MPEG4, VC-1, RV, Theora, etc. fit in here. How may this look like in future? PS:I would like this to be community wiki to have get wider range of inputs, if someone with privileges can do it for me please. thank you. -AD

  Read the article

• NETSH : Set default ip address for an interface with multiple Ips

  - by elarichi.y

  To test a load balancer I need to switch my ip address several time a day, and keep other ips routing trough other Wans. I run these commands in a batch script: netsh interface ip set address "Connexion au réseau local" static %ipd% 255.255.255.0 192.168.1.1 1 netsh in ip add address "Connexion au réseau local" %ips1% 255.255.255.0 netsh in ip add address "Connexion au réseau local" %ips2% 255.255.255.0 ipd: is the default ip I want to set (all traffic should go trough it). ips1 and ips2 : are the secondary ips I want to keep but what ever I do all traffic goes trough one IP !! (first one in the range) Please help me with this issue.

  Read the article

• Is there a way to reliably backup and restore a complex network configuration on Windows XP?

  - by djangofan

  I have some Windows XP laptops (10+) that host a ad-hoc WIFI network connection to wireless PDA devices. The laptop itself is connected via a 3rd party VPN radio network. The radio network itself seems to be reliable. If one small thing goes wrong with the network configuration then the PDA loses connectivity and so I need a way to backup a networking config , either via a script or a 3rd party program, so that I can restore a working network configuration if something goes wrong. Is this possible? Does anyone have any ideas?

  Read the article

• Router used as ethernet bridge wont show up

  - by user1255271

  I have a Netgear router in my living room that has the wireless signal. It is connected to a Powerline plug that goes up to my bedroom. That is plugged into another router that is used as an ethernet hub. It's cables go into my PS3 and my server. The second router shows up as a hidden network on my laptop, and I can connect to it. But it is not listed as an attached device on my main router, and my laptop says that it connects straight to the main router, not the second one. How can I connect to this router? Aside from swapping the two? Thanks in advance.

  Read the article

• No internet access on Windows 7 - part 2

  - by Vnuk

  This is a continuation of my previous question. The problems started when I turned on my wireless connection for the first time. Since then, every time I boot my Windows 7, my LAN connection does not have internet access. In my previous question, I got a key answer (route delete). Now my procedure to get LAN internet connectivity (local network works fine) when I boot looks like this: Power on WLAN Disconnect LAN cable Power off WLAN Execute route delete 0.0.0.0 if 11 Connect LAN cable Now my LAN connection has internet access. Another behavior that I can't explain - while my LAN connection has no internet access, Network and Sharing center refers to it as Unknown network, with a public icon. When I go through the fore mentioned procedure, it is referred to with my home WLAN network name, with status connected, and the Unknown network disappears.

  Read the article

• Setting up a software company...

  - by ThePower

  Hi all, I am a Software Engineer who wants to start developing and selling a range of products. I have some in depth ideas that I would like to go on to develop individually and sell under my own company name. Does anyone with any experience in this process have any information with regards to the route to take and process of setting things up so that I may be able to sell my applications? Also any information regarding copyrighting the material would be excellent. I am looking for the easiest way to set up a business that will allow me to have a name in which I can start selling applications to a variety of sources under. I didn't quite know which site to post this on so I hope it is relevant for superuser. Regards, Lloyd

  Read the article

• Issue about mapping MAC address to Ipv6 address

  - by deepsky

  I know that the address in ipv6 with prefix range 001 to 111 should use a 64-bit interface identifier that follows the EUI-64 format, which translates the MAC to ipv6 as below. MAC:00-02-b3-1e-83-29 --> 02-02-b3-ff-fe-1e-83-29 --->ipv6 addr: fe80::202:b3ff:fe1e:8329 Then I checked my network status with ipconfig /all on my windows XP, but it seems my ipv6 address doesn't follow the above rule: MAC:00-24-81-XX-XX-XX ipv6 addr:2001:da8:8006:225:0:24:81XX:XXXX Obviously it doesn't follow the EUI-64 format. Instead it just directly use the MAC as the last 8 bytes. Anyone know the reason? Pls Correct me if I am wrong.

  Read the article

• Nginx Tornado Combination Causing 502 Bad Gateway Errors

  - by PlaidFan

  We are facing a problem with inconsistent 502 errors and tracking down the reasons has been a very frustrating exercise. We can reproduce the problem by sending several simultaneous requests quickly. The problem is that several is only in the range of 10 to 20 within a 5 seconds (not a typo). So clearly this type of load should be handled easily. We really like the Nginx + Tornado approach but are considering going to a more traditional (e.g. threading) approach because this problem has been very difficult to solve. I was wondering if you a) know how to fix this issue and b) how we can tracked down the culprit(s). The log files simply identify there being a connection refused. We have the same problem as this post: How do I debug a HTTP 502 error? But there is no answer provided on how to solve the problem so I'm hoping you can help because this may be a common issue with this type of setup. Thanks in advance, Paul

  Read the article

• How to show what proxies/firewalls are enabled on Windows XP?

  - by Stephen Melrose

  Hi, I'm trying to fix a Windows XP PC that is having a strange problem. The computer can't seem to connect to the internet, even though an internet connection is present. The router and internet is working fine as I've connected a laptop to it via LAN and wireless and both worked fine. The PC in question is connected to the router as it has an IP from the DHCP. The problem is I can't connect to nor ping any internet address from the PC. I can't even connect to the router admin itself. I've tried both LAN ports in the PC, same problem and both. I'm assuming there's a proxy or firewall on the PC stopping the connections, I just don't know how to find them or see which one is causing the issue. So my question is how do I on Windows XP display the system proxy settings and/or any firewalls that are running? Cheers.

  Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >