Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 249/361 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• wifi key masking

  - by Warren Bullock III

  Hello, We currently utilize wifi access in some of our buildings, we are not using RADIUS at this point, but we are using WPA2 with PKI, the issue has recently come up that we want to keep our key private so we generally setup access for our users providing them the wifi key. The problem is that windows seems to give the option to go back into the wireless properties and unmask the PSK. We need to resolve this ASAP is there a way to make certain that the PSK remains masked regardless even if your logged in as a local administrator to the machine? Thanks in advance.

  Read the article

• xenserver: xe command never returns?

  - by ethrbunny

  I'm trying to port a xen server 6.2 pool to a new IP address range. I've got three servers total: 2 currently at their new IP but no longer in the pool and one remaining. I'm trying to set IP address information on the two disconnected ones using the xe command and all of its variants. Oddly enough, it never returns with any values. xe host-list It just sits there until I ctrl-c it. The server is still awake and responding though. I can enter other commands (EG ifconfig) and they work fine. If I enter this same command on the remaining server in the pool it works ok. I've tried restarting the toolstack and even rebooting. No change. What am I doing wrong?

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• cannot using internet in VMWare

  - by user66247

  I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

  Read the article

• How can i lock images to a cell in excel 2010

  - by Jamie

  Ok, so i am using microsoft excel 2010 and have a set up currently where i have 2 views expanded and deflated using the Group or +/- function. My problem is that ui have images on the workbook too. The images are over the cells which are to be "hidden" when the - button is pressed and i would like the images to disappear with them. This is not curently happening instead they are moving to the next visible cell. I have included an example below incase i wasn't clear. I wish to hide Columns M:AU and the images are in various cells suchas N5 and O5. When i colapse (hide) the column range all of the images move to "AV5" the next row along that isn't hidden. This means the workbooks is looking messy when colapsed which is the oposite of what i was trying to do. Can anyone advise on a way around this?

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• Ubuntu 10.4 No internet

  - by Keeper780

  I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• Looking up a value, depending on which set of dates another date falls between

  - by Ruffles

  Hello, and apologies if this is a duplicate - if you could point me in the direction of any existing answers, that would be great. I have a set of date ranges in Excel, each of which has some kind of label. e.g. LabelA 01/01/10 31/01/10 LabelB 01/02/10 28/02/10 LabelC 01/03/10 31/03/10 If I have another date, I would like to look up the label relating to the date range within which this date falls. e.g. For 15/02/10 I would like to return LabelB. I know that the date ranges will not overlap, although there could be a gap between the end date of one, and the start date of the next.

  Read the article

• How to call virtual function of an object in C++

  - by SoonDead

  I'm struggling with calling a virtual function in C++. I'm not experienced in C++, I mainly use C# and Java so I might have some delusions, but bear with me. I have to write a program where I have to avoid dynamic memory allocation if possible. I have made a class called List: template <class T> class List { public: T items[maxListLength]; int length; List() { length = 0; } T get(int i) const { if (i >= 0 && i < length) { return items[i]; } else { throw "Out of range!"; } }; // set the value of an already existing element void set(int i, T p) { if (i >= 0 && i < length) { items[i] = p; } else { throw "Out of range!"; } } // returns the index of the element int add(T p) { if (length >= maxListLength) { throw "Too many points!"; } items[length] = p; return length++; } // removes and returns the last element; T pop() { if (length > 0) { return items[--length]; } else { throw "There is no element to remove!"; } } }; It just makes an array of the given type, and manages the length of it. There is no need for dynamic memory allocation, I can just write: List<Object> objects; MyObject obj; objects.add(obj); MyObject inherits form Object. Object has a virtual function which is supposed to be overridden in MyObject: struct Object { virtual float method(const Input& input) { return 0.0f; } }; struct MyObject: public Object { virtual float method(const Input& input) { return 1.0f; } }; I get the elements as: objects.get(0).method(asdf); The problem is that even though the first element is a MyObject, the Object's method function is called. I'm guessing there is something wrong with storing the object in an array of Objects without dynamically allocating memory for the MyObject, but I'm not sure. Is there a way to call MyObject's method function? How? It's supposed to be a heterogeneous collection btw, so that's why the inheritance is there in the first place. If there is no way to call the MyObject's method function, then how should I make my list in the first place?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Clarification of the difference between PCI memory addressing and I/O addressing?

  - by KevinM

  Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

  Read the article

• Best way to "stream" music / video to my HDTV from my pc?

  - by loj

  My requirement is simple: I have a laptop and a desktop at home that I often use for various media (music, videos etc.) and I want to know what the best (quickest, most seamless, best quality etc) solution for sending this media to my HDTV (and connected sound system). An example would be I'm listening to some music from youtube on my laptop in my living room and want to quickly send it to my tv (which has a sound system) so that I don't have to listen to it through my laptop. I mainly use linux (but a windows dependent solution would be ok too if its the best option). I would greatly appreciate any suggestions. Oh and a wireless solution would be best.

  Read the article

• Networking issues with WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off.

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• KVM guest storage difference with NBD and NFS

  - by WojonsTech

  I am setting up my own little private cloud for my own use maybe for a project or to. I am using linux kvm on debian 6. I have 3 servers 2 of them for compute nodes and 1 storage node. I would I have already installed kvm made a few test machines got my networking setup. I have 2 nics on each server 1 nic is for web traffic other nic is for network traffic. My first Idea was to use NFS for storing the guest machines which can range in size, maybe 8gb maybe 100gb, it just depends. I was doing have heard of nbd before seems like it could work but I dont know what the performance differences are and if it will effect my enviroment, nfs looks like it will be easier to use.

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• If email not received then do X (outlook 2013 on Exchange 2010)

  - by Brad

  I receive notification emails daily and would like to automate an easier way to manage all of those notifications. For example: Notification 1 from [email protected] is received daily between 10pm-1am Notification 2 from [email protected] is received daily between 12am-3am Notification 3 from [email protected] is received daily between 1am-4am I am looking for a way to page myself at [email protected] on my cellphone if any of these messages are not received within the defined time frame of when the email should have arrived. I would like to basically email a page like: ATTENTION Notification 2 not received within the allowed range. This way I would be notified instead of having to check the email manually and see that I only received 2 of the three alerts. Is there a way to do this in Outlook? Our exchange server is a hosted exchange server on GoDaddy if that info is needed.

  Read the article

• Black Screen on Startup even after running chkdsk

  - by phwd

  I started an old (Dell Inspiron 2200) the startup goes all the way to Microsoft Windows XP Logo then I get a black screen. I am still able to move the cursor but that is about it. I tried running Recovery console (from CD) with chkdsk command. First time it said they were errors. I decided to do a fixboot and see if the errors went away. They did. Restarted and still no luck. If there are commands that I can call either from recovery console or elsewhere to further describe the problem please tell me and I will re-edit the question. srvtag:7XNSG81 Also what are my full range of options before wiping the hard-drive (if that is even the problem) I want to exhaust all options before replacing hardware.

  Read the article

• Cannot dump svn repository

  - by vinga

  I've a problem with my svn repo. I cannot use it, I even cannot dump it. svnadmin verify repo returns Can't set position pointer in file 'svn/db/revs/0/0' When I try to dump repo (no matter what revision range), console output shows: * Dumped revision 0. svnadmin: Final line in revision file missing space I've googled that this may be connected with wrong version apr apache2 library, but I have other repositories which work good, so I thing this isn't the case. Is there any way to save at least some files from my repo? Can svn repo get corrupted so easily (probably after power-cut, however I'm not sure).

  Read the article

• How to access internal network covered by a squid proxy from internet?

  - by Forbidden Overseer

  Our campus uses a squid proxy caching server with a basic authentication for all outbound requests coming from internal network. The whole network uses private IP range from 172.16.0.0 to 172.31.255.255. Most of our faculty websites and library websites are hosted on LAN. I want to access those faculty websites and other internal websites when I am outside the proxy (say when I am at my home and not in campus). I don't know whether I can use the same basic authentication from outside to access those LAN websites. Is there a way I can do that? I don't know whether our proxy server allows it or not, but if that's possible - I want to know how (how to set up browser etc.)?

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >