Search Results

Search found 22871 results on 915 pages for 'automated install'.

Page 246/915 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Windows 7 setup hangs after "Starting Windows..."-screen

  - by Eirik Lillebo

  Hi! I'm having some trouble installing Windows 7. I need to install the OS from boot in order to split my C: into two different partitions, as this is not allowed when installing from inside Vista. When I boot up from the install disc, I get the usual "Windows is copying files..."-screen, shortly followed by the "Starting Windows..."-screen with the animated window-logo or whatever. Then it looks as if the installation is about to begin with a blue screen and a cursor I can move around, but here it all stops. Nothing more happens, and the setup seems to hang. Not a single key on my keyboard has any effect, and all I am left to do is to abort and reboot. I've tried to install using two different DVDs (not clones), and the same thing happens every time. What may be causing this, and how may I fix it? Thanks in advance :)

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• Software Installation Failure!

  - by NIKOS ANTONIOU

  I get the same error whenever I try to install software on my laptop, for example: I want to install Pavucontrol. So, I open the terminal and I type sudo apt-get install pavucontrol and my terminal output is: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libgconfmm-2.6-1c2 libglademm-2.4-1c2a libpulse-mainloop-glib0 padevchooser paman paprefs pavumeter pulseaudio-module-zeroconf The following NEW packages will be installed: libgconfmm-2.6-1c2 libglademm-2.4-1c2a libpulse-mainloop-glib0 padevchooser paman paprefs pavucontrol pavumeter pulseaudio-module-zeroconf 0 upgraded, 9 newly installed, 0 to remove and 172 not upgraded. 1 not fully installed or removed. Need to get 0B/345kB of archives. After this operation, 2044kB of additional disk space will be used. Do you want to continue [Y/n]? Y perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "el_GR.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. dpkg: `ldconfig' not found on PATH. dpkg: 1 expected program(s) not found on PATH. NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) What is the problem and how do I fix it?

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Ubuntu 12.04 doesn't detect hard disk partitions

  - by m0skit0

  I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

• Installing maven on Ubuntu by manual download

  - by WebDevHobo

  To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• vihostupdate, many patches at once

  - by skomak

  Hi, i have ESXi 4.0 installed so i want to install all patch bundles available using vihostupdate.pl script from vm perl sdk. I can install it by typing: vihostupdate.pl -server 192.168.1.177 -b "C:\Documents and Settings\dawids\Pulpit\patche\ESXi-4.0.0-update01.zip" -i then patch 2,3 etc. But I would like to install them all at once, is there such possibility? Maybe there is possible to use vihostupdate patch1 then vihostupdate patch2... and after all patching reboot instead rebooting after 1 patch bundle. How is it working?

  Read the article

• Trouble installing Mercurial 1.5 on Mac OS X 10.5.8 (without using MacPorts)

  - by gjvis

  I'm having trouble installing Mercurial 1.5 (build 20100307) from the prebuilt installer on Mac OS X 10.5.8. The installer is halting telling me that I need to install Python 2.6 to continue. I've installed the latest version of Python (2.6.5) twice now but it's not helping. which python is reporting /Library/Frameworks/Python.framework/Versions/2.6/bin/python, but I can see that I also have 2.3 and 2.5 in /System/Library/Frameworks/Python.framework/Versions directory, which I suspect is being picked up by the installer ahead of the 2.6 install. If possible I'd like to install Mercurial and Python without having to resort to MacPorts, but if that is the only option then so be it :)

  Read the article

• Playing Around with WebLogic Maven Plug-In by Flavius Sana

  - by JuergenKress

  Packaged with WebLogic 12c wls-maven-plugin let’s you install, start and stop servers, create domain, execute WLST scripts, compile and deploy applications. The plug-in works with Maven 2.x and 3.x. WebLogic 12c can be downloaded from http://www.oracle.com/technetwork/index.html. Developers version has around  180MB (zip archive).  To install the plugin we need first to extract wls-maven-plugin.jar.pack and pom.xml $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/pom.xml Now, let’s unpack the jar file: $unpack200 -r wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack wls12120/wlserver/server/lib/wls-maven-plugin.jar Install the plug-in in the local repository. Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Maven,Flavius Sana,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• How to take a copy of wubi ubuntu system as it is?

  - by rajat

  I have installed ubuntu (as a dual boot) using wubi (Windows-based UBuntu Installer) installer for windows, and have been working in linux since then. Now that I have many projects with many dependencies, I'd want to install the same ubuntu to other machines, so that I don't need to install Ubuntu first, and then each and every project and it's dependencies. There is a folder called ubuntu in my windows drive, which was created by wubi and which contains all the ubuntu stuff. Other machines have only windows 7 installed and have the same configuration. Is there any way to install the save ubuntu I am using to the other machines ?

  Read the article

• Need help in making my new laptop dual boot with ubuntu 9.10

  - by michael

  Hi, I have a new laptop which comes with window 7. I want to dual-boot it with ubuntu 9.10. I have burned the install disk of 9.10. But during the install process, I am stuck in 'setup my partition'. It has 2 options: wipe out my whole hard disk' or 'manually configure' I don't want it to wipe out my whole hard disk (i want to keep my window 7). But how can I manually configure the partition to use the free space and create a partition so that I can install ubuntu 9.10 and swap space? Thank you.

  Read the article

• Installing Java 6 on Ubuntu 10.04 fails on missing Java 6 JRE package

  - by David S

  I'm trying to install Java 6 on Ubuntu 10.04 and it's been harder than it should be. In another question about installing Java on Ubuntu/Linux it said that I needed to do the following: sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" However, that failed and I kept getting: sudo: add-apt-repository: command not found The solution to this, was to run: sudo apt-get install python-software-properties So, that seemed to work and the command above to "add-apt-repository" seems to complete with no errors. And I have run the following to confirm it got added. sudo vi /etc/apt/sources.list But, now when I run the following: sudo apt-get install sun-java6-jre I get: Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jre is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jre has no installation candidate Where do I go from here?

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Unable to free space in /boot

  - by wadesworld

  Running: Linux ips-svf-1 3.0.0-22-server #36-Ubuntu SMP Tue Jun 12 17:56:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I'm trying to free space in /boot with apt-get -y purge, but every time I run the command I get an error about unmet dependencies: sudo apt-get -y purge linux-headers-3.0.0-12 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-headers-3.0.0-12-server : Depends: linux-headers-3.0.0-12 but it is not going to be installed linux-image-server : Depends: linux-image-3.0.0-26-server but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). However, I can't run apt-get -f install since /boot is full. I also tried running dpkg --purge and dpkg --remove manually, but both give the same unmet dependency error. Any suggestions on how I can successfully free space in /boot? Is there anything I can delete with rm?

  Read the article

• Installing 13.04 on an EFI partition - Share with Windows 8?

  - by mengelkoch

  Information I've found here suggests that for my system, I need to install 13.04 into an EFI-type partition, since it needs to boot as UEFI. I also understand it is advisable to have only ONE EFI partition on the disk; I've read here that it is OK for Ubuntu and Windows to share the same partition (please confirm). When I try to install into the existing EFI drive, I get the message "No root file system is defined. Please correct from partitioning menu." Do I change the EFI boot partition to another type? Doesn't that defeat the purpose? If I change it to Ext4 Journaling File System, I am given the opportunity to define the '/' Mount point. I haven't proceeded beyond this point for fear I am going to destroy Windows 8 by altering this partition. BTW, I created three partitions in Windows before installing, per the helpful response to my previous question. But if I try to install into the partition I created for Ubuntu, I get the "No root file system..." error again.

  Read the article

• installing latest apache on centos

  - by fivelitresofsoda

  hi, I'm trying to install the newest version of apache on my centos server. I did the following: Download $ wget http://httpd.apache.org/path/to/latest/version/ Extract $ gzip -d httpd-2_0_NN.tar.gz $ tar xvf httpd-2_0_NN.tar Configure $ ./configure Compile $ make Install $ make install Test $ PREFIX/bin/apachectl start And that all worked except the last step, when i type apachectl start it says 'command not found'. I ran this command from /usr/local/apache2/bin/ where it is installed but no cigar. Any idea what i am doing wrong? Thanks.

  Read the article

• Thunderbird segmentation fault problem

  - by Dariusz Górecki

  Hey all, my thunderbird crashes few seconds after it boots up regardless of in safe mode or normal, here is a strace log: http://pastebin.com/tccfYwcD I've searched google, ubuntu forums, and mozilla bug tracker about this problem, but any of found answers did not helped me :/ I've tried: nscd daemon install solutions posted earlier fresh clean instal of ubuntu 10.10 (32b) and thunderbird 3.1.7 from repos on a VM - problem still exists removed all thunderbrid related dot files and dot dirs, and setup profile from beginning Remove thunderbird and related stuff with apt purge, and install tb from official .deb package None of these steps helps me, tb still crashes with segmentation fault :/ I use gmail IMAP account, I've searched and found few other tips on google, but with no success. I've even tried to remove mails from web gui, that came after first notice of problem, still no luck. I'm not using any network fs, and not sharing this account with anyone, and I do not use filesystem or home encryption either just clean install :/ If You guys need some more info for this let me know. TB: 3.1.7 from repos and official package Ubuntu 32bit 10.10 with medibuntu repos, fully updated

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Trying to compile from source newest apache with newest openssl

  - by AlexMA

  I need to install apache 2.4.10 using openssl 1.0.1i. I compiled openssl from source with: $ ./config \ --prefix=/opt/openssl-1.0.1i \ --openssldir=/opt/openssl-1.0.1i $ make $ sudo make install and Apache with: ./configure --prefix=/etc/apache2 \ --enable-access_compat=shared \ --enable-actions=shared \ --enable-alias=shared \ --enable-allowmethods=shared \ --enable-auth_basic=shared \ --enable-authn_core=shared \ --enable-authn_file=shared \ --enable-authz_core=shared \ --enable-authz_groupfile=shared \ --enable-authz_host=shared \ --enable-authz_user=shared \ --enable-autoindex=shared \ --enable-dir=shared \ --enable-env=shared \ --enable-headers=shared \ --enable-include=shared \ --enable-log_config=shared \ --enable-mime=shared \ --enable-negotiation=shared \ --enable-proxy=shared \ --enable-proxy_http=shared \ --enable-rewrite=shared \ --enable-setenvif=shared \ --enable-ssl=shared \ --enable-unixd=shared \ --enable-ssl \ --with-ssl=/opt/openssl-1.0.1i \ --enable-ssl-staticlib-deps \ --enable-mods-static=ssl make (would run sudo make install next but I get an error) I'm essentially following the guide here except with newer slightly newer versions. My problem is I get a linker error when I run make for apache: Making all in support make[1]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' make[2]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' /usr/share/apr-1.0/build/libtool --silent --mode=link x86_64-linux-gnu-gcc -std=gnu99 -pthread -L/opt/openssl-1.0.1i/lib -lssl -lcrypto \ -o ab ab.lo /usr/lib/x86_64-linux-gnu/libaprutil-1.la /usr/lib/x86_64-linux-gnu/libapr-1.la -lm /usr/bin/ld: /opt/openssl-1.0.1i/lib/libcrypto.a(dso_dlfcn.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5' I tried the answer here, but no luck. I would prefer to just use aptitude, but unfortunately the versions I need aren't available yet. If anyone knows how to fix the linker problem (or what I think is a linker problem), or knows of a better way to tell apache to use a newer openssl, it would be greatly appreciated; I've got apache 1.0.1i working otherwise.

  Read the article

• replace controller, add second controller, or use expander?

  - by longneck

  I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I plan to add the HP 516914-B21 drive cage, which gives me 8 more SFF drives, bringing the total to 16. To get the additional 8 drives connected, I have one of three choices: Install a new controller that can support 16 drives. Install a second controller. Install a SAS expander, such as the HP 468406-B21 recommended by HP's spec sheet for my server. My question is: how do I know if I'm going hit a performance ceiling by putting 16 drives on the P410i or using the expander? And if I am, how do I select an appropriate controller? I'm not sure what specifications I should be looking at.

  Read the article

• Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

  - by Drachenviech

  I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >