Search Results

Search found 9409 results on 377 pages for 'boot loader'.

Page 249/377 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

  • How to configure a zone cluster on Solaris Cluster 4.0

    - by JuergenS
    This is a short overview on how to configure a zone cluster on Solaris Cluster 4.0. This is a little bit different as in Solaris Cluster 3.2/3.3 because Solaris Cluster 4.0 is only running on Solaris 11. The name of the zone cluster must be unique throughout the global Solaris Cluster and must be configured on a global Solaris Cluster. Please read all the requirements for zone cluster in Solaris Cluster Software Installation Guide for SC4.0. For Solaris Cluster 3.2/3.3 please refer to my previous blog Configuration steps to create a zone cluster in Solaris Cluster 3.2/3.3. A. Configure the zone cluster into the already running global clusterCheck if zone cluster can be created # cluster show-netprops to change number of zone clusters use # cluster set-netprops -p num_zoneclusters=12 Note: 12 zone clusters is the default, values can be customized! Create config file (zc1config) for zone cluster setup e.g: Configure zone cluster # clzc configure -f zc1config zc1 Note: If not using the config file the configuration can also be done manually # clzc configure zc1 Check zone configuration # clzc export zc1 Verify zone cluster # clzc verify zc1 Note: The following message is a notice and comes up on several clzc commands Waiting for zone verify commands to complete on all the nodes of the zone cluster "zc1"... Install the zone cluster # clzc install zc1 Note: Monitor the consoles of the global zone to see how the install proceed! (The output is different on the nodes) It's very important that all global cluster nodes have installed the same set of ha-cluster packages! Boot the zone cluster # clzc boot zc1 Login into non-global-zones of zone cluster zc1 on all nodes and finish Solaris installation. # zlogin -C zc1 Check status of zone cluster # clzc status zc1 Login into non-global-zones of zone cluster zc1 and configure the shell environment for root (for PATH: /usr/cluster/bin, for MANPATH: /usr/cluster/man) # zlogin -C zc1 If using additional name service configure /etc/nsswitch.conf of zone cluster non-global zones. hosts: cluster files netmasks: cluster files Configure /etc/inet/hosts of the zone cluster zones Enter all the logical hosts of non-global zones B. Add resource groups and resources to zone cluster Create a resource group in zone cluster # clrg create -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Note1: Use command # cluster status for zone cluster resource group overview. Note2: You can also run all commands for zone cluster in global cluster by adding the option -Z to the command. e.g: # clrg create -Z zc1 -n <zone-hostname-node1>,<zone-hostname-node2> app-rg Set up the logical host resource for zone cluster In the global zone do: # clzc configure zc1 clzc:zc1 add net clzc:zc1:net set address=<zone-logicalhost-ip> clzc:zc1:net end clzc:zc1 commit clzc:zc1 exit Note: Check that logical host is in /etc/hosts file In zone cluster do: # clrslh create -g app-rg -h <zone-logicalhost> <zone-logicalhost>-rs Set up storage resource for zone cluster Register HAStoragePlus # clrt register SUNW.HAStoragePlus Example1) ZFS storage pool In the global zone do: Configure zpool eg: # zpool create <zdata> mirror cXtXdX cXtXdX and # clzc configure zc1 clzc:zc1 add dataset clzc:zc1:dataset set name=zdata clzc:zc1:dataset end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p zpools=zdata app-hasp-rs Example2) HA filesystem In the global zone do: Configure SVM diskset and SVM devices. and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/data clzc:zc1:fs set special=/dev/md/datads/dsk/d0 clzc:zc1:fs set raw=/dev/md/datads/rdsk/d0 clzc:zc1:fs set type=ufs clzc:zc1:fs add options [logging] clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: # clrs create -g app-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/data app-hasp-rs Example3) Global filesystem as loopback file system In the global zone configure global filesystem and it to /etc/vfstab on all global nodes e.g.: /dev/md/datads/dsk/d0 /dev/md/datads/dsk/d0 /global/fs ufs 2 yes global,logging and # clzc configure zc1 clzc:zc1 add fs clzc:zc1:fs set dir=/zone/fs (zc-lofs-mountpoint) clzc:zc1:fs set special=/global/fs (globalcluster-mountpoint) clzc:zc1:fs set type=lofs clzc:zc1:fs end clzc:zc1 verify clzc:zc1 commit clzc:zc1 exit Check setup with # clzc show -v zc1 In the zone cluster do: (Create scalable rg if not already done) # clrg create -p desired_primaries=2 -p maximum_primaries=2 app-scal-rg # clrs create -g app-scal-rg -t SUNW.HAStoragePlus -p FilesystemMountPoints=/zone/fs hasp-rs More details of adding storage available in the Installation Guide for zone cluster Switch resource group and resources online in the zone cluster # clrg online -eM app-rg # clrg online -eM app-scal-rg Test: Switch of the resource group in the zone cluster # clrg switch -n zonehost2 app-rg # clrg switch -n zonehost2 app-scal-rg Add supported dataservice to zone cluster Documentation for SC4.0 is available here Example output: Appendix: To delete a zone cluster do: # clrg delete -Z zc1 -F + Note: Zone cluster uninstall can only be done if all resource groups are removed in the zone cluster. The command 'clrg delete -F +' can be used in zone cluster to delete the resource groups recursively. # clzc halt zc1 # clzc uninstall zc1 Note: If clzc command is not successful to uninstall the zone, then run 'zoneadm -z zc1 uninstall -F' on the nodes where zc1 is configured # clzc delete zc1

    Read the article

  • Installing skype will not work - skype-bin not installable, and 'held broken packages'

    - by Michionlion
    So, I am trying to install skype through apt-get, but after running into this problem multiple times, and trying to find a solution, it still doesn't work... I tried all the answers here: Installing Skype on 12.04 64 bit causes errors, but I still get the error. (my problem is exactly the same as that one, too) I even went and edited the package status thing manually, and removed all references to 'skype' or 'skype-bin'. I still get the problem... I'm running ubuntu 12.10, as a dual-boot with windows 7. It's a 64-bit computer.

    Read the article

  • Why does Ubuntu (and other ubuntu based distros like lubuntu and linux mint) randomly shutdown on my laptop?

    - by Imran
    I have a lenovo g555 laptop and whenever I try and boot a ubuntu based distro off a usb, it randomly shuts off my PC (Not like a normal shutdown with shutdown loading screen but a like a sudden hard power off). This problem occurs even if I have installed the distro on my harddrive. In the past I've been able to use the distro for 10 min or so before it would it would do this. Now with the latest distros, It randomly pwers off even before it has fully booted up. My hardware specs are on this website.

    Read the article

  • So Your Laptop’s Fan Has Stopped Working Then? [Humorous Image]

    - by Asian Angel
    There is such a thing as dust build-up and then there are the odd cases of dust-ball evolution… What is the worst case of dust build-up that you have dealt with? Make sure to share your stories with your fellow readers in the comments! Help, my laptop’s fan is not working! [via Reddit Tech Support Gore] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Play ‘Dune II – The Building of a Dynasty’ Online for Free [Classic Game]

    - by Asian Angel
    Are you a fan of retro sci-fi classic Dune and old-school gaming? Then get the best of both in one package with this free online version of ‘Dune II – The Building of a Dynasty’! When you arrive at the site you will need to choose your house. Once you have made your selection the next part of the game will take a moment or two to load up. From there you will see a short introduction to your chosen house (screenshot above)… Once you have gotten through the introduction to your house, then you can move on to some awesome retro gaming fun! Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

    Read the article

  • NTFS partitions hidden under EXT4 file system / partition...want to recover files from NTFS

    - by user7534
    I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

    Read the article

  • XNA Screen Manager problem with transitions

    - by NexAddo
    I'm having issues using the game statemanagement example in the game I am developing. I have no issues with my first three screens transitioning between one another. I have a main menu screen, a splash screen and a high score screen that cycle: mainMenuScreen->splashScreen->highScoreScreen->mainMenuScreen The screens change every 15 seconds. Transition times public MainMenuScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.0); currentCreditAmount = Global.CurrentCredits; } public SplashScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public HighScoreScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public GamePlayScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } When a user inserts credits they can play the game after pressing start mainMenuScreen->splashScreen->highScoreScreen->(loops forever) || || || ===========Credits In============= || Start || \/ LoadingScreen || Start || \/ GamePlayScreen During each of these transitions, between screens, the same code is used, which exits(removes) all current active screens and respects transitions, then adds the new screen to the screen manager: foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); //AddScreen takes a new screen to manage and the controlling player ScreenManager.AddScreen(new NameOfScreenHere(), null); Each screen is removed from the ScreenManager with ExitScreen() and using this function, each screen transition is respected. The problem I am having is with my gamePlayScreen. When the current game is finished and the transition is complete for the gamePlayScreen, it should be removed and the next screens should be added to the ScreenManager. GamePlayScreen Code Snippet private void FinishCurrentGame() { AudioManager.StopSounds(); this.UnloadContent(); if (Global.SaveDevice.IsReady) Stats.Save(); if (HighScoreScreen.IsInHighscores(timeLimit)) { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); Global.TimeRemaining = timeLimit; ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MessageBoxScreen("Enter your Initials", true), null); } else { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MainMenuScreen(), null); } } The problem is that when isExiting is set to true by screen.ExitScreen() for the gamePlayScreen, the transition never completes the transition and removes the screen from the ScreenManager. Every other screen that I use the same technique to add and remove each screen fully transitions On/Off and is removed at the appropriate time from the ScreenManager, but noy my GamePlayScreen. Has anyone that has used the GameStateManagement example experienced this issue or can someone see the mistake I am making? EDIT This is what I tracked down. When the game is done, I call foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); to start the transition off process for the gameplay screen. At this point there is only 1 screen on the ScreenManager stack. The gamePlay screen gets isExiting set to true and starts to transition off. Right after the above call to ExitScreen() I add a background screen and menu screen to the screenManager: ScreenManager.AddScreen(new background(), null); ScreenManager.AddScreen(new Menu(), null); The count of the ScreenManager is now 3. What I noticed while stepping through the updates for GameScreen and ScreenManager, the gameplay screen never gets to the point where the transistion process finishes so the ScreenManager can remove it from the stack. This anomaly does not happen to any of my other screens when I switch between them. Screen Manager Code #region File Description //----------------------------------------------------------------------------- // ScreenManager.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #define DEMO #region Using Statements using System; using System.Diagnostics; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using PerformanceUtility.GameDebugTools; #endregion namespace GameStateManagement { /// <summary> /// The screen manager is a component which manages one or more GameScreen /// instances. It maintains a stack of screens, calls their Update and Draw /// methods at the appropriate times, and automatically routes input to the /// topmost active screen. /// </summary> public class ScreenManager : DrawableGameComponent { #region Fields List<GameScreen> screens = new List<GameScreen>(); List<GameScreen> screensToUpdate = new List<GameScreen>(); InputState input = new InputState(); SpriteBatch spriteBatch; SpriteFont font; Texture2D blankTexture; bool isInitialized; bool getOut; bool traceEnabled; #if DEBUG DebugSystem debugSystem; Stopwatch stopwatch = new Stopwatch(); bool debugTextEnabled; #endif #endregion #region Properties /// <summary> /// A default SpriteBatch shared by all the screens. This saves /// each screen having to bother creating their own local instance. /// </summary> public SpriteBatch SpriteBatch { get { return spriteBatch; } } /// <summary> /// A default font shared by all the screens. This saves /// each screen having to bother loading their own local copy. /// </summary> public SpriteFont Font { get { return font; } } public Rectangle ScreenRectangle { get { return new Rectangle(0, 0, GraphicsDevice.Viewport.Width, GraphicsDevice.Viewport.Height); } } /// <summary> /// If true, the manager prints out a list of all the screens /// each time it is updated. This can be useful for making sure /// everything is being added and removed at the right times. /// </summary> public bool TraceEnabled { get { return traceEnabled; } set { traceEnabled = value; } } #if DEBUG public bool DebugTextEnabled { get { return debugTextEnabled; } set { debugTextEnabled = value; } } public DebugSystem DebugSystem { get { return debugSystem; } } #endif #endregion #region Initialization /// <summary> /// Constructs a new screen manager component. /// </summary> public ScreenManager(Game game) : base(game) { // we must set EnabledGestures before we can query for them, but // we don't assume the game wants to read them. //TouchPanel.EnabledGestures = GestureType.None; } /// <summary> /// Initializes the screen manager component. /// </summary> public override void Initialize() { base.Initialize(); #if DEBUG debugSystem = DebugSystem.Initialize(Game, "Fonts/MenuFont"); #endif isInitialized = true; } /// <summary> /// Load your graphics content. /// </summary> protected override void LoadContent() { // Load content belonging to the screen manager. ContentManager content = Game.Content; spriteBatch = new SpriteBatch(GraphicsDevice); font = content.Load<SpriteFont>(@"Fonts\menufont"); blankTexture = content.Load<Texture2D>(@"Textures\Backgrounds\blank"); // Tell each of the screens to load their content. foreach (GameScreen screen in screens) { screen.LoadContent(); } } /// <summary> /// Unload your graphics content. /// </summary> protected override void UnloadContent() { // Tell each of the screens to unload their content. foreach (GameScreen screen in screens) { screen.UnloadContent(); } } #endregion #region Update and Draw /// <summary> /// Allows each screen to run logic. /// </summary> public override void Update(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Update", Color.Blue); if (debugTextEnabled && getOut == false) { debugSystem.FpsCounter.Visible = true; debugSystem.TimeRuler.Visible = true; debugSystem.TimeRuler.ShowLog = true; getOut = true; } else if (debugTextEnabled == false) { getOut = false; debugSystem.FpsCounter.Visible = false; debugSystem.TimeRuler.Visible = false; debugSystem.TimeRuler.ShowLog = false; } #endif // Read the keyboard and gamepad. input.Update(); // Make a copy of the master screen list, to avoid confusion if // the process of updating one screen adds or removes others. screensToUpdate.Clear(); foreach (GameScreen screen in screens) screensToUpdate.Add(screen); bool otherScreenHasFocus = !Game.IsActive; bool coveredByOtherScreen = false; // Loop as long as there are screens waiting to be updated. while (screensToUpdate.Count > 0) { // Pop the topmost screen off the waiting list. GameScreen screen = screensToUpdate[screensToUpdate.Count - 1]; screensToUpdate.RemoveAt(screensToUpdate.Count - 1); // Update the screen. screen.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); if (screen.ScreenState == ScreenState.TransitionOn || screen.ScreenState == ScreenState.Active) { // If this is the first active screen we came across, // give it a chance to handle input. if (!otherScreenHasFocus) { screen.HandleInput(input); otherScreenHasFocus = true; } // If this is an active non-popup, inform any subsequent // screens that they are covered by it. if (!screen.IsPopup) coveredByOtherScreen = true; } } // Print debug trace? if (traceEnabled) TraceScreens(); #if DEBUG debugSystem.TimeRuler.EndMark("Update"); #endif } /// <summary> /// Prints a list of all the screens, for debugging. /// </summary> void TraceScreens() { List<string> screenNames = new List<string>(); foreach (GameScreen screen in screens) screenNames.Add(screen.GetType().Name); Debug.WriteLine(string.Join(", ", screenNames.ToArray())); } /// <summary> /// Tells each screen to draw itself. /// </summary> public override void Draw(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Draw", Color.Yellow); #endif foreach (GameScreen screen in screens) { if (screen.ScreenState == ScreenState.Hidden) continue; screen.Draw(gameTime); } #if DEBUG debugSystem.TimeRuler.EndMark("Draw"); #endif #if DEMO SpriteBatch.Begin(); SpriteBatch.DrawString(font, "DEMO - NOT FOR RESALE", new Vector2(20, 80), Color.White); SpriteBatch.End(); #endif } #endregion #region Public Methods /// <summary> /// Adds a new screen to the screen manager. /// </summary> public void AddScreen(GameScreen screen, PlayerIndex? controllingPlayer) { screen.ControllingPlayer = controllingPlayer; screen.ScreenManager = this; screen.IsExiting = false; // If we have a graphics device, tell the screen to load content. if (isInitialized) { screen.LoadContent(); } screens.Add(screen); } /// <summary> /// Removes a screen from the screen manager. You should normally /// use GameScreen.ExitScreen instead of calling this directly, so /// the screen can gradually transition off rather than just being /// instantly removed. /// </summary> public void RemoveScreen(GameScreen screen) { // If we have a graphics device, tell the screen to unload content. if (isInitialized) { screen.UnloadContent(); } screens.Remove(screen); screensToUpdate.Remove(screen); } /// <summary> /// Expose an array holding all the screens. We return a copy rather /// than the real master list, because screens should only ever be added /// or removed using the AddScreen and RemoveScreen methods. /// </summary> public GameScreen[] GetScreens() { return screens.ToArray(); } /// <summary> /// Helper draws a translucent black fullscreen sprite, used for fading /// screens in and out, and for darkening the background behind popups. /// </summary> public void FadeBackBufferToBlack(float alpha) { Viewport viewport = GraphicsDevice.Viewport; spriteBatch.Begin(); spriteBatch.Draw(blankTexture, new Rectangle(0, 0, viewport.Width, viewport.Height), Color.Black * alpha); spriteBatch.End(); } #endregion } } Game Screen Parent of GamePlayScreen #region File Description //----------------------------------------------------------------------------- // GameScreen.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #region Using Statements using System; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Input; //using Microsoft.Xna.Framework.Input.Touch; using System.IO; #endregion namespace GameStateManagement { /// <summary> /// Enum describes the screen transition state. /// </summary> public enum ScreenState { TransitionOn, Active, TransitionOff, Hidden, } /// <summary> /// A screen is a single layer that has update and draw logic, and which /// can be combined with other layers to build up a complex menu system. /// For instance the main menu, the options menu, the "are you sure you /// want to quit" message box, and the main game itself are all implemented /// as screens. /// </summary> public abstract class GameScreen { #region Properties /// <summary> /// Normally when one screen is brought up over the top of another, /// the first screen will transition off to make room for the new /// one. This property indicates whether the screen is only a small /// popup, in which case screens underneath it do not need to bother /// transitioning off. /// </summary> public bool IsPopup { get { return isPopup; } protected set { isPopup = value; } } bool isPopup = false; /// <summary> /// Indicates how long the screen takes to /// transition on when it is activated. /// </summary> public TimeSpan TransitionOnTime { get { return transitionOnTime; } protected set { transitionOnTime = value; } } TimeSpan transitionOnTime = TimeSpan.Zero; /// <summary> /// Indicates how long the screen takes to /// transition off when it is deactivated. /// </summary> public TimeSpan TransitionOffTime { get { return transitionOffTime; } protected set { transitionOffTime = value; } } TimeSpan transitionOffTime = TimeSpan.Zero; /// <summary> /// Gets the current position of the screen transition, ranging /// from zero (fully active, no transition) to one (transitioned /// fully off to nothing). /// </summary> public float TransitionPosition { get { return transitionPosition; } protected set { transitionPosition = value; } } float transitionPosition = 1; /// <summary> /// Gets the current alpha of the screen transition, ranging /// from 1 (fully active, no transition) to 0 (transitioned /// fully off to nothing). /// </summary> public float TransitionAlpha { get { return 1f - TransitionPosition; } } /// <summary> /// Gets the current screen transition state. /// </summary> public ScreenState ScreenState { get { return screenState; } protected set { screenState = value; } } ScreenState screenState = ScreenState.TransitionOn; /// <summary> /// There are two possible reasons why a screen might be transitioning /// off. It could be temporarily going away to make room for another /// screen that is on top of it, or it could be going away for good. /// This property indicates whether the screen is exiting for real: /// if set, the screen will automatically remove itself as soon as the /// transition finishes. /// </summary> public bool IsExiting { get { return isExiting; } protected internal set { isExiting = value; } } bool isExiting = false; /// <summary> /// Checks whether this screen is active and can respond to user input. /// </summary> public bool IsActive { get { return !otherScreenHasFocus && (screenState == ScreenState.TransitionOn || screenState == ScreenState.Active); } } bool otherScreenHasFocus; /// <summary> /// Gets the manager that this screen belongs to. /// </summary> public ScreenManager ScreenManager { get { return screenManager; } internal set { screenManager = value; } } ScreenManager screenManager; public KeyboardState KeyboardState { get {return Keyboard.GetState();} } /// <summary> /// Gets the index of the player who is currently controlling this screen, /// or null if it is accepting input from any player. This is used to lock /// the game to a specific player profile. The main menu responds to input /// from any connected gamepad, but whichever player makes a selection from /// this menu is given control over all subsequent screens, so other gamepads /// are inactive until the controlling player returns to the main menu. /// </summary> public PlayerIndex? ControllingPlayer { get { return controllingPlayer; } internal set { controllingPlayer = value; } } PlayerIndex? controllingPlayer; /// <summary> /// Gets whether or not this screen is serializable. If this is true, /// the screen will be recorded into the screen manager's state and /// its Serialize and Deserialize methods will be called as appropriate. /// If this is false, the screen will be ignored during serialization. /// By default, all screens are assumed to be serializable. /// </summary> public bool IsSerializable { get { return isSerializable; } protected set { isSerializable = value; } } bool isSerializable = true; #endregion #region Initialization /// <summary> /// Load graphics content for the screen. /// </summary> public virtual void LoadContent() { } /// <summary> /// Unload content for the screen. /// </summary> public virtual void UnloadContent() { } #endregion #region Update and Draw /// <summary> /// Allows the screen to run logic, such as updating the transition position. /// Unlike HandleInput, this method is called regardless of whether the screen /// is active, hidden, or in the middle of a transition. /// </summary> public virtual void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { this.otherScreenHasFocus = otherScreenHasFocus; if (isExiting) { // If the screen is going away to die, it should transition off. screenState = ScreenState.TransitionOff; if (!UpdateTransition(gameTime, transitionOffTime, 1)) { // When the transition finishes, remove the screen. ScreenManager.RemoveScreen(this); } } else if (coveredByOtherScreen) { // If the screen is covered by another, it should transition off. if (UpdateTransition(gameTime, transitionOffTime, 1)) { // Still busy transitioning. screenState = ScreenState.TransitionOff; } else { // Transition finished! screenState = ScreenState.Hidden; } } else { // Otherwise the screen should transition on and become active. if (UpdateTransition(gameTime, transitionOnTime, -1)) { // Still busy transitioning. screenState = ScreenState.TransitionOn; } else { // Transition finished! screenState = ScreenState.Active; } } } /// <summary> /// Helper for updating the screen transition position. /// </summary> bool UpdateTransition(GameTime gameTime, TimeSpan time, int direction) { // How much should we move by? float transitionDelta; if (time == TimeSpan.Zero) transitionDelta = 1; else transitionDelta = (float)(gameTime.ElapsedGameTime.TotalMilliseconds / time.TotalMilliseconds); // Update the transition position. transitionPosition += transitionDelta * direction; // Did we reach the end of the transition? if (((direction < 0) && (transitionPosition <= 0)) || ((direction > 0) && (transitionPosition >= 1))) { transitionPosition = MathHelper.Clamp(transitionPosition, 0, 1); return false; } // Otherwise we are still busy transitioning. return true; } /// <summary> /// Allows the screen to handle user input. Unlike Update, this method /// is only called when the screen is active, and not when some other /// screen has taken the focus. /// </summary> public virtual void HandleInput(InputState input) { } public KeyboardState currentKeyState; public KeyboardState lastKeyState; public bool IsKeyHit(Keys key) { if (currentKeyState.IsKeyDown(key) && lastKeyState.IsKeyUp(key)) return true; return false; } /// <summary> /// This is called when the screen should draw itself. /// </summary> public virtual void Draw(GameTime gameTime) { } #endregion #region Public Methods /// <summary> /// Tells the screen to serialize its state into the given stream. /// </summary> public virtual void Serialize(Stream stream) { } /// <summary> /// Tells the screen to deserialize its state from the given stream. /// </summary> public virtual void Deserialize(Stream stream) { } /// <summary> /// Tells the screen to go away. Unlike ScreenManager.RemoveScreen, which /// instantly kills the screen, this method respects the transition timings /// and will give the screen a chance to gradually transition off. /// </summary> public void ExitScreen() { if (TransitionOffTime == TimeSpan.Zero) { // If the screen has a zero transition time, remove it immediately. ScreenManager.RemoveScreen(this); } else { // Otherwise flag that it should transition off and then exit. isExiting = true; } } #endregion #region Helper Methods /// <summary> /// A helper method which loads assets using the screen manager's /// associated game content loader. /// </summary> /// <typeparam name="T">Type of asset.</typeparam> /// <param name="assetName">Asset name, relative to the loader root /// directory, and not including the .xnb extension.</param> /// <returns></returns> public T Load<T>(string assetName) { return ScreenManager.Game.Content.Load<T>(assetName); } #endregion } }

    Read the article

  • Ubuntu 12.04.1 desktop monitor Out of Range

    - by Zach
    I know this question has been asked many-a-times, but I cant seem to get a definate answer to it. I am running Ubuntu 12.04.1 LTS on my HP Pavillion a6 109n PC. Processor is a AMD Athlon 64 x2 Dual core Processor. Everytime I boot up my desktop, it runs BIOS, then it boots up Linux. After about 10 seconds, a little blue screen comes up saying: Out of Range: H. Frequency: 92.7KHz V. Frequency: 58.3Hz Can anyone help with this? Thanks! Zach

    Read the article

  • Exadata Storage Server software upgrade is a new era in Patching

    - by Luis Moreno Campos
    Since it was first released, Exadata Storage Server software has been releasing patch releases like every software on the planet. Storage administrators would have to do this, but by some weird tradition, no matter what level of technology, if it says "Oracle" in it, IT Managers will immediately associate this with a task for the DBA. Not the case, but if it falls onto a DBA lap, fear no evil.The last patch released for Exadata Cells, is a true master piece in patching technology. This sentence is not mine, it's from both the customer and the partner that witnessed how 3 Exadata Cells where patch in less than 4 hours, after 12 months of without a single upgrade.The patch manager that takes care of everything will patch not only the software but also the firmware and the operating system. And you know it will all work out because back in the lab everything was already tested.All you have to do is stare at the 3 Sun ILOM Windows from the 3 cells and watch as they boot and reboot, patch and fix to the latest versions all layers of the storage machines. It's a new era in Patching technology!LMC

    Read the article

  • How do I get my Canon MF4410 printer to work in Ubuntu 12.04?

    - by Kevin
    I have a Canon i-sensys MF4410 laser printer. I am running a dual boot system with Windows 7 and Ubuntu 12.04. The printer works in Windows and Ubuntu sees it when I attempt to add a new printer but I cannot get it to work in Ubuntu. (It previously worked fine under Ubuntu 8.?) I have tried installing (and un-installing) the driver cque-en but, although Ubuntu sees the printer, it does not find the driver. I have even tried using the generic laser and 'text only' drivers but these do not work. If anyone can help and it requires using terminal please give detailed instructions. Thanks Kevin

    Read the article

  • NTFS partitions hidden under EXT4 file system / partion...want to recover files from NTFS

    - by user7534
    Hi all, I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

    Read the article

  • The OTN Garage Blog Week in Review

    - by Rick Ramsey
    In case you missed the last few blogs on the OTN Garage (because somebody neglected to cross-post them here), here they are: What Day Is It and Why Am I Wearing a Little Furry Skirt? - Oracle VM Templates, Oracle Linux, Wim Coekaerts, and jet lag. A Real Cutting Edge - Oracle Sun blade systems architecture, Blade Clusters, and best practices. Which Version of Solaris Were You Running When ... - Oracle Solaris Legacy Containers and the Voyager 1 Content Cluster: Understanding the Local Boot Option in the Automatic Installer of Oracle Solaris 11 Express - Resources to help you understand this cool option Rick - System Admin and Developer Community of the Oracle Technology Network

    Read the article

  • System reverts to 87Hz refresh rate at every startup after I have installed nvidia drivers

    - by Mohammad Kamil Nadeem
    Every time the system starts the screen's refresh rate reverts to 87Hz which results in a pixelated and flickery screen which I have to manually correct every time by either selecting 60Hz as my refresh rate. I have tried "save to X configuration files" and even tried by making the changes as Root but to no avail as it again reverts to 87Hz on every system startup The Open Source Drivers are Okay for regular Unity but many games don't work on it hence I had to install the nvidia drivers. I have been facing this since the Beta Phase although this is on a fresh installation of 12.04 final release. I am also providing my Xorg.conf file just in case it might help http://paste.ubuntu.com/952196/ Also for some reason Displays shows my CRT monitor as Laptop but on open source drivers it was mentioning it as a 14" CRT only This bug is also present on Edubuntu 12.04 This is not present on Xubuntu 12.04 I had selected to install updates and 3rd party software on the install and was greeted with a correct refresh rate screen on the Boot Up. I like Xubuntu.

    Read the article

  • Mario Warfare Episode 1: Invasion Day [Video]

    - by Jason Fitzpatrick
    Back in September we shared the trailer for Mario Warfare with you–a clever live-action take on the battle in the Mushroom Kingdom. The team behind it just released the first full length episode, check it out here. We loved the trailer and the first episode is just as awesome; clearly combining the landscape and politics of Super Mario Bros. with highly stylized fighting and CGI was the right choice. If you’re interested in following the project check out their YouTube Channel and Kickstarter. Mario Warfare Episode 1 Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Easily Customize Internet Explorer 9 Using IE9 Tweaker Plus

    - by Lori Kaufman
    If you use Internet Explorer 9, we found a useful program, called IE Tweaker Plus, that allows you to easily tweak and customize over 27 settings in the browser, as well as create customized IE9 shortcuts that automatically open IE in InPrivate mode. IE9 Tweaker Plus does not need to be installed. To run it, simply extract the .zip file you downloaded (see the link at the end of this article) and double-click on the .exe file. If the User Account Control dialog box displays, click Yes to continue. HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It?

    Read the article

  • checking apt-get update lock file

    - by stewy613
    I have in stalled a dual boot beside windows and now I'm having a problem checking "apt-get update" when I type in apt-get update this is the outcome. I don't know what to do anthony@anthony-Inspiron-530s:~$ ls Desktop Downloads examples.desktop~ Pictures Templates Documents examples.desktop Music Public Videos anthony@anthony-Inspiron-530s:~$ apt-get update E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? anthony@anthony-Inspiron-530s:~$ apt-get upgrade E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? anthony@anthony-Inspiron-530s:~$ cd apt-get update bash: cd: apt-get: No such file or directory anthony@anthony-Inspiron-530s:~$

    Read the article

  • Screen brightness control not working on Lenovo T530

    - by Matt
    My brightness control doesn't work with a fresh install of 12.10 (brand new laptop). It is set to the brightest setting when I boot up and when I try to change it, I see the notification bar come up but the brightness doesn't actually change. I've tried all the solutions I could find around the Internet but none of them work. Things I have tried include: Editing /sys/class/backlight/acpi_video0/brightness In /usr/share/X11/xorg.conf.d/10-brightness-control.conf: Option "RegistryDwords" "EnableBrightnessControl=1" In /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" There is no xorg.conf file in 12.10 that I have found, so the solutions that suggest editing that file don't do me a whole lot of good. I am currently using the Nouveau driver, but switching to the Nvidia proprietary drivers made no difference. Any other ideas? When is this bug going to be fixed? With all the reports I've come across I would think it would get a lot of attention. Thanks.

    Read the article

  • Often "running in low-graphics mode” with NVidia GeForce GT 430

    - by user42228
    Often (every fifth time perhaps) when I turn on my system, I'm greeted with the "running in low-graphics mode” window. Sometimes all I have to do is reboot and the system will start correctly, sometimes there can be a longer series of failed starts. If I go to the terminal and log in, I can run startx and my desktop will appear without problems. At the end of /var/log/Xorg.1.log I see this: [ 77.459] (EE) Screen(s) found, but none have a usable configuration. [ 77.459] Fatal server error: [ 77.459] no screens found [ 77.459] Please consult the The X.Org Foundation support at http://wiki.x.org Is the NVidia creating the appropriate XOrg configuration dynamically on every boot, or what could explain that the configuration error above only occurs sometimes?

    Read the article

  • which graphics driver will solve my laptop screen display problem?

    - by vi.su.
    which graphics driver will solve my laptop screen display problem? Recently installed Ubuntu 10.04.4 LTS on my laptop and upgraded it to 12.10, through 12.04.1 LTS. I am not able to get the display right, from the beginning. During boot laptop screen is all green, and images / videos are not getting displayed properly when logged in. Actual problem started last week, when this laptop was with Windows Vista (preloaded), and I tried to update Nvidia graphics drivers. something went wrong and I couldn't find a way to fix, so decided to install Ubuntu. Over last week, installed / re-installed Ubuntu many times with various drivers with no success. Laptop : Dell Inspiron 1420 Installed OS : ubuntu 10.04 LTS (Current, Ubuntu 12.10) Nvidia driver : GeForce 8400M GS (tried in previous installations; not installed now) Print-screen was not able to catch this issue as mentioned in the comment, so I am posting screen photos.

    Read the article

  • Ask the Readers: What’s on Your Geeky Christmas List?

    - by Jason Fitzpatrick
    From tablets to replicas of Tattoine, visions of geeky and technology-loaded gifts surely dance in many of your heads. This week’s question is all about you and the loot you’d love to find in your stocking this year. Whether you’re dreaming of tech goodies like a new ultrabook or ebook reader, or of more geeky pursuits like a Star Trek themed chess set or a tour of Africa to visit abandoned Star Wars sets, we want to hear all about it. Don’t be bashful, hop into the comments and let loose with your wish list; check back on Friday for a What You Said roundup highlighting wishes from the endearing to the extravagant. Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

    Read the article

  • Three Alternatives to Apple’s Flaky iOS Alarm Clock

    - by Jason Fitzpatrick
    If two iPhone alarm failures in less than three months (the Daylight Savings bug and the New Year’s bug) isn’t motivation to grab a 3rd party alarm app, we don’t know what is. Check out these feature-packed replacements for dependable time keeping. Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap Serene Blue Ubuntu Wallpaper for Your Desktop Enjoy Old School Style Video Game Fun with Chicken Invaders Hide the Twitter “Litter” in Twitter’s Sidebar Area (Chrome and Iron) Public Domain Day: Reflections on Copyright and the Importance of Public Domain

    Read the article

  • Solaris 11 pkg fix is my new friend

    - by user12611829
    While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

    Read the article

  • How to Fix the “Firefox Is Already Running” Error

    - by Chris Hoffman
    The “Firefox is already running, but is not responding” error has haunted Firefox users for years. You don’t have to restart your computer when you see this error – you can usually fix it with a quick trip to the Task Manager. This error occurs when Firefox is closed but is still running in the background. Firefox is either in the process of closing or is frozen and hasn’t quit properly. In rare situations, there may be a problem with your profile. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • CPU fan kicks in to full gear when i try to install ubuntu 12.10 or LTS

    - by Remi cook
    Whenever I try to install (DUAL BOOT WITH WINDOWS 7) both versions of Ubuntu desktop on my PC the CPU fan starts spinning so fast that I couldn't even go through the installation for fear of my CPU exploding. In windows 7, the temp reaches 25-30 idle and 30-45 under full load. I tried installing through Wubi and by burning it to USB drive. Both wield the same results. I would appreciate any help. I'm a complete noob so take it easy one me. Intel Core i5 2500 @ 3.30GHz 4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24) Motherboard ASUSTeK Computer INC. P8Z68-V LX (LGA1155) Graphics AMD Radeon HD 6850 (Sapphire/PCPartner)

    Read the article

  • Banned Children’s Toys from Christmases Past

    - by Jason Fitzpatrick
    What could possibly go wrong giving a child a nuclear science kit that includes highly poisonous materials inside? Everything of course, which is why that particular toy only lasted a single holiday. Buzzfeed reports on some of the toys of holidays past that were quickly pulled off the shelves. In regard to the nuclear kit pictured here, they write: Only available from 1951–1952, this science kit for CHILDREN included four types of uranium ore, a Geiger counter, a comic called Dagwood Spits the Atom, and a coupon for ordering MORE radioactive materials. One of the four uranium ores included was Po-210 (Polonium) which, by mass, is 250,000 times more toxic than hydrogen cyanide. “Merry Christmas, Kevin, here’s that giant box of poison you asked for.” Hit up the link below for more entries, including some pulled from the shelves as recently as 2007. 8 Banned Children’s Toys From Yesteryear [BuzzFeed] Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

    Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >