Search Results

Search found 926 results on 38 pages for 'ignoring'.

Page 25/38 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Perfect is the enemy of “Good Enough”

    - by Daniel Moth
    This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • What is a Valid Trust Anchor in Windows 7 relating to Wifi?

    - by Aaron
    The error below just started happening at work with a personal laptop running Windows 7 Ultimate. I'm unable to use installed, non-expired certificates to connect to a private wireless network. No recent changes were made by IT that would explain the issue. It worked fine several weeks ago and happens on two laptops I own. The details and some screen shots are here: http://www.wiredprairie.us/blog/index.php/archives/906 The error we don't understand is this: The credentials provided by the server could not be validated. We recommend that you terminate the connection and contact your administrator with the information provided in the details. You may still connect but doing so exposes you to the security risk by a possible rogue server. The server XYZ presented a valid certificate issued by Company Name Certificate Authority but Company Name Certificate Authority is not configured as a valid trust anchor for this profile. We don't know to to resolve the issue without ignoring the error (nor what's changed that could explain this new error). Update: The new information is that we have our own Root CA, and that the certificates were not updated recently, nor have any expired.

    Read the article

  • IIS6: Web Site presenting the wrong SSL certificate

    - by pcampbell
    Consider an IIS6 installation with multiple Web Sites. Each is intended to be a different subdomain with its own cert (not a wildcard cert). Each has their host-header specified properly. foo.example.com - port 443. Require SSL w/128 bit. Working properly! It presents its SSL cert properly to the browser. Configured for a specific IP address. bar.example.com - port 443. Require SSL w/128 bit. Configured for all unassigned addresses. When inspecting the IIS property page, it fully shows the cert for bar.example.com on the View Certificate button. This is a NEW web site that is having cert problems. It's presenting the cert for foo.example.com. Ouch! Question: can you have more than one subdomains both running on separate websites with SSL certs on the same port (443)? How would you configure 2 web sites on the same range of 'all unassigned' for the same port (443) ? Update: ignoring the cert error, when browsing to https://bar, the content served is from https://foo site. When NOT using SSL, browsing to http://bar serves the correct content from bar. Just one address is assigned to this DMZ server.

    Read the article

  • Networking stopped working on Ubuntu

    - by 1337Rooster
    I installed Ubuntu 10.04 through the Wubi installer (Funny, I installed it today and thought I would have gotten 10.10). I had a network connection and everything was working fine. I rebooted my coumputer a couple of times and then suddenly, I could not connect to the network and when I click the wireless/networking icon it says "Networking Disabled". I reinstalled Ubuntu and the problem went away. After a few reboots the problem returned. I have tried restarting to see if it would come back as well as a few other things listed below. Any other suggestions would be appreciated. Tried to restart networking via /etc/init.d/networking: amato@ubuntu:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0. [ OK ] Tried to stop and start it: amato@ubuntu:~$ sudo /etc/init.d/networking stop * Deconfiguring network interfaces... [ OK ] amato@ubuntu:~$ amato@ubuntu:~$ sudo /etc/init.d/networking start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service networking start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start networking networking stop/waiting Tried start networking: amato@ubuntu:~$ start networking start: Rejected send message, 1 matched rules; type="method_call", sender=":1.58" (uid=1000 pid=2241 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo start networking networking stop/waiting Tried service networking restart: amato@ubuntu:~$ service networking restart restart: Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=1000 pid=2248 comm="restart) interface="com.ubuntu.Upstart0_6.Job" member="Restart" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo service networking restart restart: Unknown instance: Here are the contents of my /etc/network/interfaces. auto lo iface lo inet loopback I even tried to modify it to this (based on something I read, online, not sure if I was doing the right thing here). Tried everything again and no luck: auto lo eth0 iface lo inet loopback iface eth0 inet dhcp

    Read the article

  • Exchange 2010 add mailbox server to DAG error

    - by Michael
    Hello, i'm having some problems when adding a second mailbox server to my DAG in Exchange 2010. The test setup goes like this: 1x windows server 2008 (DC/DNS) 2x windows server 2008 (Exchange 2010) I have made sure all services are up and running and that the "Exchange Trusted Subsystem" account is set as a local admin. When i create a DAG i can add the first mailbox server (A) without any problems, but when i go to add the second (B) it gives me an error saying "Unable to contact the Cluster service on 1 other members (member) of the Database availability group. It does the same if i add (B) first and then try to add (A). Here is a part of the log file: [2010-04-05T15:00:27] GetRemoteCluster() for the mailbox server failed with exception = An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(EXCHANGE20102.area51.com) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. This is OK. [2010-04-05T15:00:27] Ignoring previous error, as it is acceptable if the cluster does not exist yet. [2010-04-05T15:00:27] DumpClusterTopology: Opening remote cluster AREA51DAG01. [2010-04-05T15:00:27] DumpClusterTopology: Failed opening with Microsoft.Exchange.Cluster.Replay.AmClusterApiException: An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(AREA51DAG01.area51.com) failed with 0x5. Error: Access is denied"' failed. --- System.ComponentModel.Win32Exception: Access is denied --- End of inner exception stack trace --- Any help would be really appreciated, thanks.

    Read the article

  • Get user profile size in vbscript

    - by Cameron
    Hello, I am trying to get the size of a user's local profile using VBScript. I know the directory of the profile (typically "C:\Users\blah"). The following code does not work for most profiles (Permission Denied error 800A0046): Dim folder Dim fso Set fso = WScript.CreateObject("Scripting.FileSystemObject") Set folder = fso.GetFolder("C:\Users\blah") MsgBox folder.Size ' Error occurs here Is there another way to do this? UPDATE: I did some deeper digging and it turns out that the Permission Denied error occurs if permission is denied to some subfolders or files of the directory whose size I wish to get. In the case of user profiles, there's always a few system files that even the Administrator group does not have permission to access. To get around this, I wrote a function that tries to get the folder size the normal way (above), then, if the error occurs, it recurses into the subdirectories of the folder, ignoring folder sizes that are permission denied (but not the rest of the folders). Dim fso Set fso = WScript.CreateObject("Scripting.FileSystemObject") Function getFolderSize(folderName) On Error Resume Next Dim folder Dim subfolder Dim size Dim hasSubfolders size = 0 hasSubfolders = False Set folder = fso.GetFolder(folderName) ' Try the non-recursive way first (potentially faster?) Err.Clear size = folder.Size If Err.Number <> 0 then ' Did not work; do recursive way: For Each subfolder in folder.SubFolders size = size + getFolderSize(subfolder.Path) hasSubfolders = True Next If not hasSubfolders then size = folder.Size End If End If getFolderSize = size Set folder = Nothing ' Just in case End Function

    Read the article

  • CVSROOT problem because of username string

    - by jatanp
    Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

    Read the article

  • local msmtp and ovh hosting

    - by klez
    I have my personal email hosted on OVH (personal hosting plan) and I'm not able to send mails using msmtp. Here's a typical session ignoring system configuration file /etc/msmtprc: File o directory non esistente loaded user configuration file /home/klez/.msmtprc using account default from /home/klez/.msmtprc host = ssl0.ovh.net port = 465 timeout = off protocol = smtp domain = localhost auth = choose user = federicoculloca%xxxxxxx password = * ntlmdomain = (not set) tls = on tls_starttls = off tls_trust_file = (not set) tls_crl_file = (not set) tls_fingerprint = (not set) tls_key_file = (not set) tls_cert_file = (not set) tls_certcheck = off tls_force_sslv3 = off tls_min_dh_prime_bits = (not set) tls_priorities = (not set) auto_from = off maildomain = (not set) from = federicoculloca@xxxxxxxx dsn_notify = (not set) dsn_return = (not set) keepbcc = off logfile = (not set) syslog = (not set) reading recipients from the command line TLS certificate information: Owner: Common Name: ssl0.ovh.net Organizational unit: Domain Control Validated Issuer: Common Name: OVH Secure Certification Authority Organization: OVH SAS Organizational unit: Low Assurance Country: FR Validity: Activation time: lun 31 gen 2011 01:00:00 CET Expiration time: mer 15 feb 2012 00:59:59 CET Fingerprints: SHA1: F9:DC:41:F9:A2:38:51:9B:56:E4:98:E6:CD:81:31:42:E6:0E:26:6D MD5: FC:EC:F3:8F:28:E4:7E:28:99:89:E6:BB:C9:DF:71:CE <-- 220 ns0.ovh.net ssl0.ovh.net. You connect to mail427.ha.ovh.net ESMTP --> EHLO localhost <-- 250-ssl0.ovh.net. You connect to mail427.ha.ovh.net <-- 250-AUTH LOGIN PLAIN <-- 250-AUTH=LOGIN PLAIN <-- 250-PIPELINING <-- 250-8BITMIME <-- 250 SIZE 109000000 --> AUTH PLAIN xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <-- 235 ok, go ahead (#2.0.0) --> MAIL FROM:<federicoculloca@xxxxx> --> RCPT TO:<[email protected]> --> DATA <-- 250 ok <-- 250 ok <-- 354 go ahead --> hello world --> . <-- 554 mail server permanently rejected message (#5.3.0) And my configuration # ~/.msmtp # Mostly from Peter Garrett's examples # https://lists.ubuntu.com/archives/ubuntu-users/2007-September/122698.html # Accounts from Scott Robbins' `A Quick Guide to Mutt' # http://home.nyc.rr.com/computertaijutsu/mutt.html account xxxxx host ssl0.ovh.net from federicoculloca@xxxxxx auth on user federicoculloca%xxxxxx password xxxxxx tls on tls_certcheck off tls_starttls off Any idea?

    Read the article

  • Ipsec config problem // openswan

    - by user90696
    I try to configure Ipsec on server with openswan as client. But receive error - possible, it's auth error. What I wrote wrong in config ? Thank you for answers. #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "f-net" #1: received Vendor ID payload [Cisco-Unity] 003 "f-net" #1: received Vendor ID payload [Dead Peer Detection] 003 "f-net" #1: ignoring unknown Vendor ID payload [ca917959574c7d5aed4222a9df367018] 003 "f-net" #1: received Vendor ID payload [XAUTH] 108 "f-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response 031 "f-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message 000 "f-net" #1: starting keying attempt 2 of at most 3, but releasing whack other side - Cisco ASA. parameters for my connection on our Linux server : VPN Gateway 8.*.*.* (Cisco ) Phase 1 Exchange Type Main Mode Identification Type IP Address Local ID 4.*.*.* (our Linux server IP) Remote ID 8.*.*.* (VPN server IP) Authentication PSK Pre Shared Key Diffie-Hellman Key Group DH 5 (1536 bit) or DH 2 (1024 bit) Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 86.400 seconds / no volume limit Phase 2 Security Protocol ESP Connection Mode Tunnel Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 3600 seconds / 4.608.000 kilobytes DPD / IKE Keepalive 15 seconds PFS off Remote Network 192.168.100.0/24 Local Network 1 10.0.0.0/16 ............... Local Network 5 current openswan config : # config setup klipsdebug=all plutodebug="control parsing" protostack=netkey nat_traversal=no virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn f-net type=tunnel keyexchange=ike authby=secret auth=esp esp=aes256-sha1 keyingtries=3 pfs=no aggrmode=no keylife=3600s ike=aes256-sha1-modp1024 # left=4.*.*.* leftsubnet=10.0.0.0/16 leftid=4.*.*.* leftnexthop=%defaultroute right=8.*.*.* rightsubnet=192.168.100.0/24 rightid=8.*.*.* rightnexthop=%defaultroute auto=add

    Read the article

  • Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

    - by Tim Visher
    Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

    Read the article

  • Browsing Audiobooks on an iPod Nano

    - by Electrons_Ahoy
    The sitation: I've got a stack of audiobooks in MP3 format in my iTunes library, and both an iPhone and an iPod Nano. After this question, I've changed the Media Kind for the audiobook MP3s from Music to Audiobook. This has been, overall, spectacular, as now I can resume where I was, they show up under Audiobooks, etc. On the iPhone, it's also super convenient, since the interface shows what used to be an album with multiple songs as a single book with multiple chapters, and going into "Audiobooks" presents me with a list of books, not tracks. The Nano, on the other hand, is a little strange. After changing the media type and re-syncing the ipod, the files in question are now listed under Audiobooks rather than Music, and the extra Audiobook features are present (resume playback and so on,) but the Audiobooks menu just lists all the MP3 tracks on the iPod in alphabetical order, ignoring whichever book/album they belong to - and doesn't seem to let me browse them any other way. This is, clearly, a little sub-optimal. Did I screw something up? How do I get the Nano to treat the files in a similar way to the way the iPhone and iTunes does - as books with chapters? Is there a step I missed somewhere? Do I need to reformat the iPod? Is this even possible? (Footnote: shameless bump, since this just scored me a tumbleweed.)

    Read the article

  • SCCM 2012 - some remote clients unable to download some applications, 401.2 error

    - by growse
    I've got a small SCCM 2012 deployment with about 35 clients attached. Most of these clients are in the same network as the single SCCM host, but three are about 1000 miles away. Oddly, these three clients have stopped being able to download some application packages over BITS. Publishing a new package works for all the other clients, but for these three it never seems to download. If I go to the software centre, it just hangs at "0% downloaded". On the client, the DataTransfer.log says (repeatedly): CDTSJob::HandleErrors: DTS Job '{2DCBBB4C-6D84-479A-9218-885B72C834B9}' BITS Job '{E78147DD-4A26-4942-B4FD-6EC3EB77EECD}' under user 'S-1-5-18' OldErrorCount 442 NewErrorCount 443 ErrorCode 0x80072EE2 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) CDTSJob::HandleErrors: DTS Job ID='{2DCBBB4C-6D84-479A-9218-885B72C834B9}' URL='http://sccm-host:80/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1' ProtType=1 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) Cas.log says (repeatedly): Location update from CTM for content Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 and request {AD041FCB-03D2-4FE6-A6FA-38A6B80FB2A1} ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download location found 0 - http://lonsbrndsccm02.mcs.int.thomsonreuters.com/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download request only, ignoring location update ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) On the server, I've enabled failed request log tracing. The raw IIS log says the following: 2012-07-30 08:28:42 10.13.111.35 GET /SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1/sccm /NSCP-0.4.0.172-x64.msi 80 - 10.2.27.19 Microsoft+BITS/7.5 401 2 5 293 Which is a 401.2 error, meaning access denied. The failed request log is large, but the punchline is that it chucks out a Unauthorized: Access is denied due to invalid credentials. message. All clients are members of the same domain and appear to be (otherwise) working great. I've re-installed the SCCM client, deleted and re-added the computer to SCCM. Some other packages seem to work fine, the daily anti-malware delta gets downloaded and patched without issue. Why are these packages failing?

    Read the article

  • RPCSS kerberos issues on imaged Windows workstations

    - by sysadmin1138
    While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

    Read the article

  • Htpc aka "Media Center": cheap and *silent*?

    - by Unknown
    It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

    Read the article

  • snort with barnyard2 not working on Fedora 12

    - by aHunter
    Has anyone come across this error with barnyard2 and snort? --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" Log directory = /var/log/barnyard2 database: compiled support for (mysql) database: configured to use mysql database: schema version = 107 database: host = localhost database: user = test database: database name = snort database: sensor name = localhost:eth0 database: sensor id = 1 database: data encoding = hex database: detail level = full database: ignore_bpf = no database: using the "log" facility --== Initialization Complete ==-- ______ -*> Barnyard2 <*- / ,,_ \ Version 2.1.8 (Build 251) |o" )~| By the SecurixLive.com Team: http://www.securixlive.com/about.php + '''' + (C) Copyright 2008-2010 SecurixLive. Snort by Martin Roesch & The Snort Team: http://www.snort.org/team.html (C) Copyright 1998-2007 Sourcefire Inc., et al. WARNING: Ignoring corrupt/truncated waldofile '/var/log/snort/barnyard.waldo' Opened spool file '/var/log/snort/snort.log.1282004944' ERROR: Unknown record type read: 104 Fatal Error, Quitting.. Snort seems to be working correctly as I have managed to get logs via syslog but when I try to use the barnyard config via Unified2 it is not working. Presumably because of the above error. Thanks in advance.

    Read the article

  • IIS 7.0 404 Custom Error Page and web.config

    - by Colin
    I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

    Read the article

  • How to bypass resume from hibernate

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • How can I explain to dspam that the user "brandon" is the same as "brandon@mydomain"

    - by Brandon Craig Rhodes
    I am using dspam for spam filtering by running the "dspamd" daemon under Ubuntu 9.10 and then setting up a Postfix rule that says: smtpd_recipient_restrictions = ... check_client_access pcre:/etc/postfix/dspam_everything ... where that PCRE map looks like this: /./ FILTER lmtp:[127.0.0.1]:11124 This works well, and means that all users on my system get all of their email, whether "dspam" thinks it is innocent or not, and have the option of filtering on its decisions or ignoring them. The problem comes when I want to train dspam using my email archives. After reading about the "dspam" command, I tried this on the files in my Inbox and spam boxes (which date from when I was using another filtering solution): for file in Mail/Inbox/*; do cat $file | dspam --class=innocent --source=corpus; done for file in Mail/spam/*; do cat $file | dspam --class=spam --source=corpus; done The symptom I noticed after doing all of this was that dspam was horrible at classifying spam — it couldn't find any! The problem, when I tracked it down, was that I was training the user "brandon" with the above commands, but the incoming email was instead compared against the username "brandon@mydomain", so it was running against a completely empty training database! So, what can I do to make the above commands actually train my fully-qualified email address rather than my bare username? I would like to avoid having to run "dspam" as root with a "--user" option. I would have expected that the "dspam" configuration files would have had an "append_domain" attribute or something with which to decorate local usernames with an appropriate email domain, but I can't find any such thing. When I used to use the Berkeley DB backend to "dspam", I solved this problem by creating a symlink from one of the databases to the other. :-) But that solution eventually died because the BDB backend is not thread-safe, so now I have moved to the PostgreSQL back-end and need a way to solve the problem there. And, no, the table where it keeps usernames has a UNIQUE constraint that prevents me from listing both usernames as mapping to the same ID. :-)

    Read the article

  • DisableCrossAccountCopy not working on some Outlook installs, working on others, both going against Exchange

    - by MikeBaz
    As part of a mail migration project from one Exchange organization to another, we need to be able to prevent users from moving/copying messages between their accounts in each organization. (Yes, users will think this is evil; no, it's not my decision; yes, users will hate us.) Luckily, we thought, Outlook 2010 provides the DisableCrossAccountCopy registry value/policy (cf. http://technet.microsoft.com/en-us/library/ff800883.aspx). (Because you can't do multiple Exchange organizations in a single profile before Outlook 2010, this only matters on Outlook 2010. Yes, I'm ignoring for the sake of this question copy/move to/from the filesystem.) In our test lab, in a test forest with a test Exchange organization, with a second Exchange account added to the profile in either of the "real" Exchange organizations, with the value set to "*", everything works as expected. On a workstation in one of the production domains, however, the setting does not seem to work. We have tried it under HKCU, HKLM, HKCU\Software\Policies, and HKLM\Software\Policies. It simply seems to be ignored. The value was set in the OCT on a test machine, but the OCT (and the ADM/ADMX file) have the wrong type for the value. We have located the value in the registry and removed it everywhere it is found, we think, and put it back in HKCU, but it still isn't taking. At the moment, a clean Outlook install is not an option - even if it was, we at this point would need to know what to do to fix the pushed copy (I didn't push the copy out to thousands of machines, I've just been asked to help clean up the current mess). Thoughts?

    Read the article

  • Wireless disconnect randomly with wpa_supplicant reason=2

    - by renenglish
    I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

    Read the article

  • Security in shared hosting vs VPS 'virtual appliances'

    - by Pedro Loureiro
    I have to change my hosting provider. Right now I have a shared hosting account but I'm considering trying the LAMP stack appliance from turnkeylinux.org. I'm very comfortable with using linux, I've been using it for a long time. I have no problem ssh'ing into remote machines and do whatever I have to do (coding, reading logs, moving files, deploying, etc). The problem is that none of those tasks have involved securing the server/firewall. My experience has been as a desktop user or developer deploying apps/files in remote servers. Ignoring the security in the application logic (read: any scripts, frameworks, websites I might have created or installed) - I'm worried about things like base configuration of deamons, firewall, ports, executable scripts being readable from the outside and whatnot. My question is: how do you compare the (expected) out of the box security of the LAMP stack from turnkey and the (expected) security of a "regular" shared hosting provider? I was hoping to find some guides with a list of steps to do to protect my server but the only documentation I found was simply referring to ubuntu's documentation.

    Read the article

  • How can I get WAMP and a domain name to work on a non-standard port?

    - by David Murdoch
    I have read countless articles on setting up a domain on WAMP to listen on a port other than 80; none of them are working. I've got Windows Server 2008 (Standard) with IIS 7 installed and running on port 80 (and 443). I've got WAMP installed with the following configuration. Listen 81 ServerName sub.example.com:81 DocumentRoot "C:/Path/To/www" <Directory "C:/Path/To/www"> Options All MultiViews AllowOverride All # onlineoffline tag - don't remove Order Allow,Deny Allow from all </Directory> localhost:81 works with the above configuration but sub.example.com:81 does not. Just to make sure my firewall wasn't getting in the way I have disabled it completely. My sub.example.com domain is already pointing to my server and works on IIS on port 80. Also, if I disable IIS and change the Apache port from 81 to 80 it works. Yes, I am restarting Apache after each httpd.conf change. :-) I don't need any other domain (or sub domains [I don't even care about localhost]) configured which is why I'm not using a VirtualHost. Any ideas what is going on here? What could I be doing wrong? Update Changing Listen to 80 but keeping ServerName as sub.example.com:81 causes navigation to sub.example.com:80 to work; this just doesn't seem right to me. Could ServerName be ignoring the :port part somehow? netstat -a -n | find "TCP": >netstat -a -n | find "TCP" TCP 0.0.0.0:81 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:912 0.0.0.0:0 LISTENING ... TCP 127.0.0.1:81 127.0.0.1:49709 TIME_WAIT ...

    Read the article

  • PHP output buffer settings ignored by server

    - by Ecom Evolution
    I have been trying to flush the output of certain scripts to the browser on demand, but they do not work on our production server. For instance, I tried running the "Phoca Changing Collation tool" (find it on Google) and I don't see any output until the script finishes executing. I've tried immediately flushing the buffer on other scripts that work fine on any server but this one using the following code: echo "something"; ob_flush(); flush(); Setting "ob_implicit_flush(1);" doesn't help either. The server is Apache 2.2.21 with PHP 5.2.17 running on Linux. You can see our php.ini file here if that will help: http://www.smallfiles.org/download/1123/php.ini.html This isn't the only problem we are having with the server ignoring in-script directives. The server also ignores timeout coding such as: ini_set('max_execution_time', 900*60); AND set_time_limit(86400); Script always times out at the php.ini default. Doesn't seem to matter if script is executed in IE or Firefox. Tried "ini_set('zlib.output_compression_level', 'Off');" and checked that it is "Off" in the php.ini file. The code "apache_setenv('no-gzip', 1);" causes a fatal error so tried uploading a .htaccess file with the "mod_gzip_on No" directive. Neither helps. Tried running Apache as fcgi and suphp, but same results. Server is NOT in safe mode. Pullin ma hair out!

    Read the article

  • Upgrading PEAR from 1.9.0 to 1.9.1 fails

    - by Skelton
    Hi All, I'm willing to install phpunit 5.3 with MAMP 1.9 and there for I need to upgrade PEAR to version 1.9.1. The current version installed is 1.9.0. When I try the to upgrade I get the following: sudo pear channel-update pear.php.net sudo pear upgrade pear Could not get contents of package "/Applications/MAMP/bin/php5.3/bin/pear". Invalid tgz file. upgrade failed When I force the upgrade It still doesn't work: sudo pear upgrade --force PEAR downloading PEAR-1.9.1.tgz ... Starting to download PEAR-1.9.1.tgz (293,587 bytes) .............................................................done: 293,587 bytes upgrade ok: channel://pear.php.net/PEAR-1.9.1 PEAR: Optional feature webinstaller available (PEAR's web-based installer) PEAR: Optional feature gtkinstaller available (PEAR's PHP-GTK-based installer) PEAR: Optional feature gtk2installer available (PEAR's PHP-GTK2-based installer) PEAR: To install optional features use "pear install pear/PEAR#featurename" sudo pear -V PEAR Version: 1.9.0 As bindbn suggested: sudo pear install --offline /Users/tom/Downloads/PEAR-1.9.1.tgz Ignoring installed package pear/PEAR Nothing to install sudo pear upgrade --force --alldeps PEAR downloading PEAR-1.9.1.tgz ... Starting to download PEAR-1.9.1.tgz (293,587 bytes) .............................................................done: 293,587 bytes upgrade ok: channel://pear.php.net/PEAR-1.9.1 PEAR: Optional feature webinstaller available (PEAR's web-based installer) PEAR: Optional feature gtkinstaller available (PEAR's PHP-GTK-based installer) PEAR: Optional feature gtk2installer available (PEAR's PHP-GTK2-based installer) PEAR: To install optional features use "pear install pear/PEAR#featurename" pear -V PEAR Version: 1.9.0 I hope someone can figure this out! Thanks!

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >