Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 250/783 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

  • VOIP and internet connection speeds [cable vs. fiber]

    - by microchasm
    Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

    Read the article

  • How to reduce the windows network browsing broadcast timeout or disable this function?

    - by Moi42
    Hello everyone. My residential network is make of 300 vlans (one per room). To browse them we are using a wins server. My problem is that when I try to browse the network, windows first tries to find the neighborhood using some broadcast, and only then does it query the wins server. This "broadcast period" lasts exactly 30 seconds and is very annoying. Can I reduce it, or can I completely disable this broadcast network discovery feature from my system? Thank you for your answers.

    Read the article

  • Can I split one ethernet line coming out of my wall into multiple separate lines?

    - by Burteçin 'Turk' Sapta
    Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

    Read the article

  • What is your approach to draw a representation of your network ?

    - by Kartoch
    Hello, I'm looking to the community to see how people are drawing their networks, i.e. using symbols to represent complex topology. You can have hardware approach, where every hardware unit are represented. You can also have "entity" approach, where each "service" is shown. Both are interesting but it is difficult to have both on the same schema (but this is needed, especially using virtualization environment). Furthermore, it is difficult to have complex informations on such representation. For instance security parameters (encrypted link, need for authentication) or specific details (protocol type, ports, encapsulation). So my question is: where your are drawing a representation of your network, what is your approach ? Are you using methodology and/or specific softwares ? What is your recommendations for information to put (or not) ? How to deal with the complexity when the network becomes large and/or you want to put a lot of information on it ? Examples and links to good references will be appreciated.

    Read the article

  • Wrong Connection-specific DNS Suffix

    - by mydoghasworms
    I am on a Windows network with a Windows 7 machine. For some strange reason, when I run ipconfig, I see that I have the wrong DNS suffix for my network adapters, e.g. def.companyname.com as oppsed to abc.companyname.com. My colleagues next to me, who are on the same network, have the correct suffix. Where does the problem originate, and is it something I can fix on my machine (and if so, how?), or is this something a network administrator must resolve? (I did ipconfig /release and /renew, but that did not help).

    Read the article

  • External WiFi Adapter for Eee PC 1000?

    - by Peter M
    I have an original Eee PC 1000 running the stock Xandros. I have run into problems where the internal WiFi card does not seem to have enough sensitivity to connect to a lot of access points. Although the computer will report APs in the area, unless the signal strength is over 80% (as reported by the Wireless networks application) I cannot seem get a connection. So is there a recommended USB WiFi adapter that is known to work with the Eee PC/Xandros system or in general with a Debian based system?

    Read the article

  • Avoiding QoS degradation for video streaming clients

    - by aarege31
    Suppose I have two routers connected via a 1Gbit connection. A client behind router 1 streams to a client behind router 2 while other clients behind router 1 transmit data to other clients behind router 2. Are there any best practice policing, scheduling or queue management algorithms available that help a beginner understand what is necessary to prevent QoS degration in simple cases as above as well as in real world environments?

    Read the article

  • Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

    - by iyl
    I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

    Read the article

  • Ethernet cable unplugged after updating from windows 8.0 to 8.1

    - by Pehmolelu
    Yeah, so I went and updated my windows 8 pro to 8.1. Now everything else seems to work but the network. The Ethernet just says that Network cable is unplugged, even though it is plugged and I have tried different cord as well and I have tested that the router works. I have tried uninstalling the network drivers (Realtec PCIe GBE) and reinstall them with no success. After installing drivers the Device Management gives error for it "Device could not be started. Code 10" Before 8.1 update I had rt630x64.inf, after update it was netrt630x64.inf, and after installing the latest driver rt630x64.inf. With rt630x64.inf there isn't any error, but it's still not just working. New downloaded version: 8.020.0815.2013 (From Realtek website) The driver before: 8.1.510.2013 (After updating the windows to 8.1) I'm using Desktop PC, no VM. I dont have VirtualBox or Vmware installed. I have checked from BIOS that the card is enabled. I have booted in safe mode with network enabled. Says unplugged there as well. I have put the power off for few minutes and put back on, no effect. If anyone has any kind of suggestions, please tell.

    Read the article

  • Ubuntu Server static IP

    - by FoxyShadoww
    I am trying to give my server a static ip address. This seems to work without any problems, but I can't seem to get an internet connection after this process. I've also changed my dns server to 8.8.8.8 (google dns right?). OS: Ubuntu Server 12.04 x86 Environment: Virtualbox File: /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.2.10 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1

    Read the article

  • "destination host unreachable" while ping attempt between 2 pc on 1 network

    - by Roberto Sadfasdf
    I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

    Read the article

  • How can I restrict my mates to stop downloading?

    - by user239295
    We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

    Read the article

  • How to stop my wireless adapter from received dhcp from router (windows)

    - by baobeiii
    Hi, I have a windows 7 computer which is connected via vpn to an OpenVpn server which happens to be in another country. I have all internet traffic being routed from my computer through the vpn to the server. However dns queries are not going through the vpn, but are instead going directly to my isp's dns via a route outside of the vpn tunnel. This is happening because my wireless adapter is configured to obtain DNS server address automatically. The router that stands between my computer and the internet happens to have a DCHP server running on it that is assinging my computer with the DNS addresses of the isp. The issue is, i haven't been able to stop my wireless adapter on my computer from receiving the dns settings from the router. I've tried selecting 'use the following dns server addresses' and then just leaving them blank, but ipconfig /all shows me that this hasn't worked and i'm still getting dns form the router. So is there any way to completely stop my windows wireless adapter from receiving these settings from the router? I have the OpenVpn server pushing to my computer's tun adapter the dns that it should be using. I'd rather solve this in a way that doesn't involve disabling the dhcp server on the router or fiddling with the router. The reason is i'm on a laptop and i want my vpn to not leak dns even when i'm out, for example in wireless hotspots. I know if i could just force the wireless adapter to ignore the router's dhcp server then my dns queries would go through the tunnel to the dns address pushed by the OpenVpn server. Sorry, i know thats long winded, if you have any idea's please do tell me. Thanks and merry xmas.

    Read the article

  • how to switch played music when someone enters

    - by ymajoros
    My wife has a small shop, and she plays free licensed music. She can't legally play her own music when people outside of the family circle are present in the shop. How can I automatically switch music when someone enters? I was thinking of some bluetooth door detector and some custom software, but can't seem to find either. I'm a software architect/dev and can write it if necessary, but I'd prefer to use some existing solution. Any ideas on good hardware and software for this?

    Read the article

  • one of my web hostings is down - only for me - why ?

    - by Thomas Traub
    My first post here, I am reading / learning a lot, thanks ;). I've got a mysterious issue (for me) and would really appreciate to get it solved. I've rent a reseller package with bibihost.com and it's now the second time that all my domaines the hoster's site are unavailable from my connection (my Mac and my iPhone), (in browser, per FTP, ping, ab, and traceroute) This has never before happened to me with other web addresses. traceroute get's always stuck at a specific server 40g.vss-1-6k.routers.chtix.eu (91.121.131.29) The sites are all up for everyone else, I've checked with downforeveryoneorjustme.com, a homegrown script loaded to another server and montastic.com My question(s) : Why am I blocked ? Is there anything I can do about it ? If I cannot solve this issue I have to change the hoster, but I really would like to know what's going on. my domaines on this server : tienstiens.fr tomlegrand.com

    Read the article

  • Linux live cd with Broadcom Wi-fi support

    - by paul simmons
    I am looking for a live distro that has out of the box Broadcom wireless support. I am pretty happy with my Ubuntu installation and as long as I have an ethernet connection first time installed, I can install Broadcom drivers over internet. But being a little paranoid, I make my secure operations (banking etc.) with a live cd and zero hard disk access, so nothing is recorded. So far I plug ethernet to do such things with the live cd, but it would be nice if I can do same thing with wireless.

    Read the article

  • Temporarily configuring a default gateway (Windows Vista)

    - by justintime
    I would like to change the default gateway for the wired ethernet port on my laptop- the DHCP server is giving the wrong one. I would like it to revert to the existing config on a reboot. I would prefer a command line way of doing it - so I can easily repeat the command as needed. Do I need ipconfig or route - both of which confuse me.

    Read the article

  • Only receiving one document at a time from new web server.

    - by Robert Kuykendall
    We're trying to move our internal ticketing system from a Microsoft Small Business Server in the server closet to a Rackspace Cloud Server. The install is Fedora 11 LAMP, and should be default out of the box, except for the vhosts appended to the bottom of the httpd.conf. The new server is suffering from crippling load times, and watching the page load in Firebug it's easy to see the problem occurring, but I can't figure out the cause. Here is the [old server] (http://rkuykendall.com/uploads/old.server.png). I was expecting something like this, but a little slower since it was no longer hosted locally. Instead, the [new server] (http://rkuykendall.com/uploads/new.server.png) appears to only serve one file at a time. Here's another example of this [staircase load time effect] (http://rkuykendall.com/uploads/staircase.png) and another very clear example of the [staircase effect] (http://rkuykendall.com/uploads/staircase2.png). I talked to some guys on Freenode #httpd with no luck. I created a duplicate server to play with, and also created a fresh server with Fedora Core 13 and moved over just the database and web files with no luck. Any suggestions? ( image links disabled due to n00b-spam-restrictions )

    Read the article

  • Right solution for /etc/hosts file reset on reboot

    - by user846226
    i've just installed funtoo and after setting the FQDN on /etc/conf.d/hostname i noticed when setting a list of aliases in /etc/hosts file it get overwtiten on each reboot. Someone points to set the aliases to 127.0.0.2 ip address but that's not a valid solution for me. Could someone point me to the file where i should place entries like 127.0.0.1 local.foo 127.0.0.1 local.bar in order to make them persist in /etc/hosts after rebooting? Thanks! PD: I think openresolv could be the one who is overwritting the file.

    Read the article

  • Can I use an apple airport express as a wired bridge?

    - by Chris
    I have a wireless network using an Apple Airport extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple airport express's ethernet jack to create a wireless to wired bridge? If not what device would I use to do the same thing?

    Read the article

  • House Wiring for Ethernet/Coax/Power

    - by Adam Kragt
    Hoping this is the right place to post, the rest didn't seem to fit. If not, I apologize. Remodeling my house and want to wire up each room with Ethernet/coax wall ports. Both Ethernet, coax and power will be running through the sub-floor. I've read that there needs to be 2 ft between power cables and Ethernet to limit/prevent interference. Is this true? If not, does anyone know what the distance is? Thanks!

    Read the article

  • ssh can't connect after server ip changed

    - by Kery
    I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

    Read the article

  • Samba+Windows: Allow multiple connections by different users?

    - by rgoytacaz
    Hello there, I have a machine running Ubuntu with Samba that I use to share stuff with my family's Windows machines in our local network. Currently they access a share for movies/music/etc with one user. I want to connect them to another share as a different user (for example, user "goytacaz"). When I try connecting to this new share, Windows gives me "Error 1219" and complains about multiple connections by the same user. How do I get my machine to accept multiple connections by the same user?

    Read the article

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP.

    Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >