Search Results

Search found 52506 results on 2101 pages for 'multiple value'.

Page 252/2101 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• Silverlight DataStateBehavior, initial value not used

  - by JimmySavile

  Hi, I am trying to use the Silverlight DataStateBehavior, it works fine in most cases where I click a button which sets say a 'Selected' Property in the view model to either false or true. The DataStateBehavior then tells the VisualStateManager to go to the relevant state. Like this: <Button...> <i:Interaction.Behaviors> <id:DataStateBehavior Binding="{Binding Selected}" Value="True" TrueState="SelectedVisualState" FalseState="DeselectedVisualState"/> </i:Interaction.Behaviors> </Button> The above works fine. What I am trying to do though is to get it to set the correct state when the application loads, if I were to set the 'Selected' property on the view model to true by default I wouldn't see any changes in the UI until I clicked the button to change the viewmodel property. I know there are several classes involved with the DataState stuff including: BindingListener.cs ConverterHelper.cs DataStateBehavior.cs DataStateSwitchBehavior.cs DataTrigger.cs Any clues would be good, Thanks

  Read the article

• ASP.NET: Dynamically enable or disable RequiredFieldValidator based on value of DropDownList

  - by Jeremy

  I have an ASP.NET form with three text inputs, one each for "Work Phone", "Home Phone" and "Cell Phone". Each of these text inputs has a RequiredFieldValidator associated with it. I also have a DropDownList where the user can select the preferred phone type. I want to only require the field that is selected in the DropDownList. For example, if the user selects "Work Phone" from the DropDownList, I want to disable the RequiredFieldValidator for "Home Phone" and "Cell Phone", thereby only making the "Work Phone" field required. I have a method that enables and disables these validators based on the value of the DropDownList, but I cannot figure out when to call it. I want this method to run before the validation takes place on the page. How would I do that? Let me know if you need any more information. Thanks.

  Read the article

• GIT repository layout for server with multiple projects

  - by Paul Alexander

  One of the things I like about the way I have Subversion set up is that I can have a single main repository with multiple projects. When I want to work on a project I can check out just that project. Like this \main \ProductA \ProductB \Shared then svn checkout http://.../main/ProductA As a new user to git I want to explore a bit of best practice in the field before committing to a specific workflow. From what I've read so far, git stores everything in a single .git folder at the root of the project tree. So I could do one of two things. Set up a separate project for each Product. Set up a single massive project and store products in sub folders. There are dependencies between the products, so the single massive project seems appropriate. We'll be using a server where all the developers can share their code. I've already got this working over SSH & HTTP and that part I love. However, the repositories in SVN are already many GB in size so dragging around the entire repository on each machine seems like a bad idea - especially since we're billed for excessive network bandwidth. I'd imagine that the Linux kernel project repositories are equally large so there must be a proper way of handling this with Git but I just haven't figured it out yet. Are there any guidelines or best practices for working with very large multi-project repositories?

  Read the article

• Deselect dates in Web Calendar c#

  - by yomismo

  Hello, I'm trying to select and de-select dates on a C# Web Calendar control. The problem I have is that I can select or deselect dates except when there is only a single date selected. Clicking on it does not trigger the selection changed event, so Ineed to do something on the dayrender event but I'm not sure what or how. Any ideas? TIA Code so far: public static List<DateTime> list = new List<DateTime>(); protected void Calendar1_DayRender(object sender, DayRenderEventArgs e) { if (e.Day.IsSelected == true) { list.Add(e.Day.Date); } Session["SelectedDates"] = list; } protected void Calendar1_SelectionChanged(object sender, EventArgs e) { DateTime selection = Calendar1.SelectedDate; if (Session["SelectedDates"] != null) { List<DateTime> newList = (List<DateTime>)Session["SelectedDates"]; foreach (DateTime dt in newList) { Calendar1.SelectedDates.Add(dt); } if (searchdate(selection, newList)) { Calendar1.SelectedDates.Remove(selection); } list.Clear(); } } public bool searchdate(DateTime date, List<DateTime> dates) { var query = from o in dates where o.Date == date select o; if (query.ToList().Count == 0) { return false; } else { return true; } }

  Read the article

• Silverlight MergedDictionary - Attribute Value out of Range

  - by Wonko the Sane

  Hello All, I have a Silverlight-3 solution that contains a few different projects. I want to have one "common" project for holding controls and resources that will be used by multiple other projects. Within the common project, there is a folder called Resources, which holds a ResourceDictionary (CommonColors.xaml). This is set to be built as a Resource, Do Not Copy. I add a reference to the common project in another project (call it UncommonControls), and attempt to add the ResourceDictionary as a MergedDictionary: <UserControl.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/Common;component/Resources/CommonColors.xaml" /> <ResourceDictionary Source="/UncommonControls;component/Resources/UncommonStyles.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </UserControl.Resources> When I try to run, I get an exception: Attribute /Common;component/Resources/CommonColors.xaml value is out of range. [Line: 14 Position: 44] --- Inner Exception --- The given key was not present in the dictionary. However, if I reference a ResourceDictionary local to Uncommon (such as the UncommonStyles.xaml, above) project, which is set up with the same Build properties, it works fine. I haven't seen anything that says SL3 can't reference an external ResourceDictionary (on the contrary, I've seen an example of using one, albeit with no downloadable project to verify the behavior). Thanks, Wonko

  Read the article

• Value of AppDomain.CurrentDomain.SetupInformation.ConfigurationFile changes based on if the file exi

  - by Dan Neely

  I have a check to make sure the app.config file exists and to report an error if it does not: System.Windows.Forms.MessageBox.Show(AppDomain.CurrentDomain.SetupInformation.ConfigurationFile); if (!File.Exists(AppDomain.CurrentDomain.SetupInformation.ConfigurationFile)) { throw new ConfigurationErrorsException("Unable to find configuration file. File is expected at location: " + AppDomain.CurrentDomain.SetupInformation.ConfigurationFile + "\n"); } When I build the app.config file in my solution is added to the output directory as AppName.exe.config, and if run from outside visual studio AppDomain.CurrentDomain.SetupInformation.ConfigurationFile contains the path C:...\AppName.exe.config (from within VS it's C:..\AppName.vshost.exe.config). If I delete AppName.exe.config, the value is C:..\Appname.config (no .exe). I did a bit of farther experimentation, and if Appname.config exists that file will also work to load my setting values. What's going on here? I need to have everything consistent for error reporting purposes.

  Read the article

• Read multiple tables from dataset in Powershell

  - by Lucas

  I am using a function that collects data from a SQL server: function Invoke-SQLCommand { param( [string] $dataSource = "myserver", [string] $dbName = "mydatabase", [string] $sqlCommand = $(throw "Please specify a query.") ) $SqlConnection = New-Object System.Data.SqlClient.SqlConnection $SqlConnection.ConnectionString = "Server=$dataSource;Database=$dbName;Integrated Security=True" $SqlCmd = New-Object System.Data.SqlClient.SqlCommand $SqlCmd.CommandText = $sqlCommand $SqlCmd.Connection = $SqlConnection $SqlAdapter = New-Object System.Data.SqlClient.SqlDataAdapter $SqlAdapter.SelectCommand = $SqlCmd $DataSet = New-Object System.Data.DataSet $SqlAdapter.Fill($DataSet) $SqlConnection.Close() $DataSet.Tables[0] } It works great but returns only one table. I am passing several Select statements, so the dataset contains multiple tables. I replaced $DataSet.Tables[0] with for ($i=0;$i -lt $DataSet.tables.count;$i++){ $Dataset.Tables[$i] } but the console only shows the content of the first table and blank lines for each records of what should be the second table. The only way to see the result is to change the code to $Dataset.Tables[$i] | out-string but I do not want strings, I want to have table objects to work with. When I assign what is returned by the Invoke-SQLCommand to a variable, I can see that I have an array of datarow objects but only from the first table. What happened to the second table? Any help would be greatly appreciated. Thanks

  Read the article

• Passing arguments by value or by reference in objective C

  - by Rafael

  Hello, I'm kind of new with objective c and I'm trying to pass an argument by reference but is behaving like it were a value. Do you know why this doesn't work? This is the function: - (void) checkRedColorText:(UILabel *)labelToChange { NSComparisonResult startLaterThanEnd = [startDate compare:endDate]; if (startLaterThanEnd == NSOrderedDescending){ labelToChange.textColor = [UIColor redColor]; } else{ labelToChange.textColor = [UIColor blackColor]; } } And this the call: UILabel *startHourLabel; (this is properly initialized in other part of the code) [self checkRedColorText:startHourLabel]; Thanks for your help

  Read the article

• How to get the value of a SELECT HtmlElement in C# webBrowser control

  - by AndrewW

  Hi, In a C# WebBrowser control, I have generated a SELECT HtmlElement with a number of OPTION elements using w.RenderBeginTag(HtmlTextWriterTag.Select). I need to get the value of the select when the user changes it, and so added an event handler in the WebBrowser DocumentCompleted event. private void webBrowser1_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { .... webBrowser1.Document.GetElementById("id_select_0").AttachEventHandler("onchange", new EventHandler(ddSelectedIndexChanged)); .... } protected void ddSelectedIndexChanged(object sender, EventArgs e) { .... } The event handler does get called, but the sender parameter is null and e is empty. Does anyone know how to overcome this problem? Andrew

  Read the article

• How to get record value from LinqDataSource via Code Behind

  - by rockinthesixstring

  I've got a LinqDataSource that retrieves a single record. Protected Sub LinqDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.LinqDataSourceSelectEventArgs) Handles LinqDataSource1.Selecting Dim BizForSaleDC As New DAL.BizForSaleDataContext e.Result = BizForSaleDC.bt_BizForSale_GetByID(e.WhereParameters("ID")).FirstOrDefault End Sub I'd like to be able to retrieve the values of said DataSource using the Page_Load function. Protected Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs) Handles Me.Load 'Get the right usercontrol' Dim ctrl As UserControl Select Case DataBinder.Eval(LINQDATASOURCE_SOMETHING.DataItem, "AdType") Case 1 : ctrl = DirectCast(Me.FindControl("Default1"), UserControl) Case 2 : ctrl = DirectCast(Me.FindControl("Default1"), UserControl) Case 3 : ctrl = DirectCast(Me.FindControl("ValuPro1"), UserControl) Case 4 : ctrl = DirectCast(Me.FindControl("ValuPro1"), UserControl) Case Else : ctrl = Nothing End Select 'set the control to visible' ctrl.Visible = True End Sub But obviously the code above doesn't work... I'm just wondering if there's a way to make it work. Here is the full markup <body> <form id="form1" runat="server"> <asp:LinqDataSource ID="LinqDataSource1" runat="server"> <WhereParameters> <asp:QueryStringParameter ConvertEmptyStringToNull="true" Name="ID" QueryStringField="ID" Type="Int32" /> </WhereParameters> </asp:LinqDataSource> <uc:Default ID="Default1" runat="server" Visible="false" /> <uc:ValuPro ID="ValuPro1" runat="server" Visible="false" /> </form> </body> </html> Basically what happens is the appropriate usercontrol is enabled and that usercontrol inherits the LinqDataSource and displays the appropriate information. EDIT: It's working now with the code below, however, since I'm really not into hitting the database multiple times for the same info, I'd prefer to get the value from the DataSource. 'Query the database' Dim _ID As Integer = Convert.ToInt32(Request.QueryString("ID")) Dim BizForSaleDC As New BizForSaleDataContext Dim results = BizForSaleDC.bt_BizForSale_GetByID(_ID).FirstOrDefault 'Get the right usercontrol' Dim ctrl As UserControl Select Case results.AdType Case 1 : ctrl = DirectCast(Me.FindControl("Default1"), UserControl) Case 2 : ctrl = DirectCast(Me.FindControl("Default1"), UserControl) Case 3 : ctrl = DirectCast(Me.FindControl("ValuPro1"), UserControl) Case 4 : ctrl = DirectCast(Me.FindControl("ValuPro1"), UserControl) Case Else : ctrl = Nothing End Select

  Read the article

• Multiple choice list with custom view?

  - by Po

  I've seen example com.example.android.apis.view.List11 from ApiDemos. In that example, each row takes the view android.R.simple_list_item_multiple_choice. Each such view has a TextView and a CheckBox. Now I want each view to have 2 TextView's and 1 CheckBox, somewhat similar to the List3 example. I tried creating a custom layout file row.xml like this: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <CheckBox android:id="@+id/checkbox" android:layout_alignParentRight="true" android:layout_width="wrap_content" android:layout_height="fill_parent" /> <TextView android:id="@+id/text_name" android:textSize="13px" android:textStyle="bold" android:layout_toLeftOf="@id/checkbox" android:layout_alignParentLeft="true" android:layout_width="fill_parent" android:layout_height="wrap_content" /> <TextView android:id="@+id/text_phone" android:textSize="9px" android:layout_toLeftOf="@id/checkbox" android:layout_below="@id/text_name" android:layout_width="fill_parent" android:layout_height="wrap_content" /> </RelativeLayout> Then in Activity.onCreate(), I do like this: public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Query the contacts mCursor = getContentResolver().query(Phones.CONTENT_URI, null, null, null, null); startManagingCursor(mCursor); ListAdapter adapter = new SimpleCursorAdapter(this, R.layout.row, mCursor, new String[] { Phones.NAME, Phones.NUMBER}, new int[] { R.id.text_name, R.id.text_phone }); setListAdapter(adapter); getListView().setChoiceMode(ListView.CHOICE_MODE_MULTIPLE); } The result kind of looks like what I want, but it looks like the list doesn't know which item of it is selected. Also, I need to click exactly on the checkbox. In the List11 example, I only need to click on the item row. So what do I need to do to make a multiple choice list with my custom view for each row? Many thanks.

  Read the article

• Changing ActiveRecord attribute value in before_save hook

  - by fifigyuri

  I needed to fix the encoding of an ActiveRecord attribute and decided to do it in a before_save hook. And at this point I noticed an unexpected feature. When I wanted to change the value of the attribute, simple using the attribute_name=XY did not work as I expected. Instead of that I needed to use self[:attribute_name]=XY. So far did not recognise this behaviour and I used AR.attribute_name=XY. What is the reason for this? Does this behaviour relate to the hook or something else? Thanks for explanation.

  Read the article

• Chaining multiple MapReduce jobs in Hadoop.

  - by Niels Basjes

  In many real-life situations where you apply MapReduce, the final algorithms end up being several MapReduce steps. I.e. Map1 , Reduce1 , Map2 , Reduce2 , etc. So you have the output from the last reduce that is needed as the input for the next map. The intermediate data is something you (in general) do not want to keep once the pipeline has been successfully completed. Also because this intermediate data is in general some data structure (like a 'map' or a 'set') you don't want to put too much effort in writing and reading these key-value pairs. What is the recommended way of doing that in Hadoop? Is there a (simple) example that shows how to handle this intermediate data in the correct way, including the cleanup afterward? Thanks.

  Read the article

• Cross-platform embedded database/key-value store for C#

  - by Arne Claassen

  I'm looking for a fast, embeddable key/value store with cursor semantics over key collections (or a simple embeddable DB) that I can use in .NET and mono. Need it to be open-source, would prefer an MIT or Apache style license over a GPL license. Not opposed to a library that needs bindings to be written, as long as binaries are available for both windows and linux. Options considered: SQLite - has bindings and native implementation, but single-threaded and not all that fast Embedded InnoDB - no .NET bindings i can find and it's GPLv2 Berkley DB - no .NET bindings i can find Tokyo Cabinet - no .NET bindings i can find and problematic to build on windows MadCow Memory-mapped data structures - GPLv2 Is there an option better than the above that i'm missing, or bindings for the above i don't know about?

  Read the article

• antlr grammar multiple alternatives

  - by joe

  I have this simple grammar for a C# like syntax. I can't figure out any way to separate fields and methods. All the examples I've seen for parsing C# combine fields and methods in the same rule. I would like to split them up as my synatx is pretty simple. grammar test; options { language =CSharp2; k = 3; output = AST; } SEMI : ';' ; LCURLY : '{' ; RCURLY : '}' ; LPAREN : '(' ; RPAREN : ')' ; DOT :'.'; IDENTIFIER : ( 'a'..'z' | 'A'..'Z' | '_' ) ( 'a'..'z' | 'A'..'Z' | '_' | '0'..'9' )* ; namespaceName : IDENTIFIER (DOT IDENTIFIER)* ; classDecl : 'class' IDENTIFIER LCURLY (fieldDecl | methodDecl)* RCURLY ; fieldDecl : namespaceName IDENTIFIER SEMI; methodDecl : namespaceName IDENTIFIER LPAREN RPAREN SEMI; I always end up wit this warning Decision can match input such as "IDENTIFIER DOT IDENTIFIER" using multiple alternatives: 1, 2

  Read the article

• Handling multiple column data with Java

  - by Ender

  I am writing an application that reads in a large number of basic user details in the following format; once read in it then allows the user to search for a user's details using their email: NAME ROLE EMAIL --------------------------------------------------- Joe Bloggs Manager [email protected] John Smith Consultant [email protected] Alan Wright Tester [email protected] ... The problem I am suffering is that I need to store a large number of details of all people that have worked at the company. The file containing these details will be written on a yearly basis simply for reporting purposes, but the program will need to be able to access these details quickly. The way I aim to access these files is to have a program that asks the user for the name of the unique email of the member of staff and for the program to then return the name and the role from that line of the file. I've played around with text files, but am struggling with how I would handle multiple columns of data when it comes to searching this large file. What is the best format to store such data in? A text file? XML? The size doesn't bother me, but I'd like to be able to search it as quickly as possible. The file will need to contain a lot of entries, probably over the 10K mark over time.

  Read the article

• EJB3 - using 2 persistence units within a transaction (Exception: Local transaction already has 1 no

  - by Sorcha

  I am trying to use 2 persistence units within the same transaction in a JEE application deployed on Glassfish. The 2 persistence units are defined in persistence.xml, as follows: <persistence-unit name="BeachWater"> <jta-data-source>jdbc/BeachWater</jta-data-source> ... <persistence-unit name="LIMS"> <jta-data-source>jdbc/BeachWaterLIMS</jta-data-source> ... These persistence units correspond to JDBC resources and connection pools which I had defined in Glassfish as follows (include one here as both are identical apart from names & database connection info): JDBC Resource: JNDI Name: jdbc/BeachWaterLIMS Pool Name: BEACHWATER_LIMS Connection Pool: Name: BEACHWATER_LIMS Datasource Classname: com.microsoft.sqlserver.jdbc.SQLServerConnectionPoolDataSource Resource Type: javax.sql.ConnectionPoolDataSource There are 3 stateless session beans, LimsServiceBean, AnalysisServiceBean and AnalysisDataTransformationServiceBean. Here are the relevant snippets from LimsServiceBean: @PersistenceContext(unitName = "LIMS") EntityManager em; ... public ArrayList<Sample> getLatestLIMSData() { Query q = em.createNamedQuery("Sample.findBySubTypeStatus"); return new ArrayList<Sample>(q.getResultList()); } From AnalysisServiceBean: @PersistenceContext(unitName = "BeachWater") EntityManager em; ... public ArrayList<AnalysisType> getAllAnalysisTypes() { Query q = em.createNamedQuery("AnalysisType.findAll"); return new ArrayList<AnalysisType>(q.getResultList()); } And from AnalysisDataTransformationServiceBean: @EJB private AnalysisService analysisService; @EJB private LimsService limsService; public void transformData() { List<AnalysisType> analysisTypes = analysisService.getAllAnalysisTypes(); ArrayList<Sample> samples = limsService.getLatestLIMSData(); This call to limsService.getLatestLIMSData() caused the following exception: [exec] Caused by: javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b60e-fcs (12/23/2008))): oracle.toplink.essentials.exceptions.DatabaseException [exec] Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: java.lang.IllegalStateException: Local transaction already has 1 non-XA Resource: cannot add more resources. Having consulted this page, http://msdn.microsoft.com/en-us/library/ms378484.aspx (among many others), I tried changing the definition of the connection pools to: Connection Pool: Name: BEACHWATER_LIMS Datasource Classname: com.microsoft.sqlserver.jdbc.SQLServerXADataSource Resource Type: javax.sql.XADataSource Ping via the Glassfish admin console succeeds, but call to analysisService.getAllAnalysisTypes() now throws an exception: Caused by: javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b60e-fcs (12/23/2008))): oracle.toplink.essentials.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: javax.transaction.SystemException Any ideas?

  Read the article

• Reattaching an object graph to an EntityContext: "cannot track multiple objects with the same key"

  - by dkr88

  Can EF really be this bad? Maybe... Let's say I have a fully loaded, disconnected object graph that looks like this: myReport = {Report} {ReportEdit {User: "JohnDoe"}} {ReportEdit {User: "JohnDoe"}} Basically a report with 2 edits that were done by the same user. And then I do this: EntityContext.Attach(myReport); InvalidOperationException: An object with the same key already exists in the ObjectStateManager. The ObjectStateManager cannot track multiple objects with the same key. Why? Because the EF is trying to attach the {User: "JohnDoe"} entity TWICE. This will work: myReport = {Report} {ReportEdit {User: "JohnDoe"}} EntityContext.Attach(myReport); No problems here because the {User: "JohnDoe"} entity only appears in the object graph once. What's more, since you can't control how the EF attaches an entity, there is no way to stop it from attaching the entire object graph. So really if you want to reattach a complex entity that contains more than one reference to the same entity... well, good luck. At least that's how it looks to me. Any comments? UPDATE: Added sample code: // Load the report Report theReport; using (var context1 = new TestEntities()) { context1.Reports.MergeOption = MergeOption.NoTracking; theReport = (from r in context1.Reports.Include("ReportEdits.User") where r.Id == reportId select r).First(); } // theReport looks like this: // {Report[Id=1]} // {ReportEdit[Id=1] {User[Id=1,Name="John Doe"]} // {ReportEdit[Id=2] {User[Id=1,Name="John Doe"]} // Try to re-attach the report object graph using (var context2 = new TestEntities()) { context2.Attach(theReport); // InvalidOperationException }

  Read the article

• TortoiseSVN trunk checkout "Server sent unexpected return value (403 Forbidden) in response to OPTIO

  - by S Bogdan

  First of all please excuse my lack of knowledge, I'm new to Tortoise, and my bad English. My problem is that every time I do some operation with an URL like the following one: https://nttt.dttt.com:8443/svn/nttt/Med/trunk I get "Server sent unexpected return value (403 Forbidden) in response to OPTIONS". The user and password I supplied was correct, so no problem there. I don't know where the problem lies, I don't know if it is the server(on witch I don't have any control) or my Tortoise client. Thanks in advance for any answer or guidance.

  Read the article

• Consumed WCF service returns void although return type (& value) specified

  - by Abs

  I have a WCF service that I am attempting to connect to via a console application for testing (although will move to WPF for the final interface). I have generated the proxy, added the service reference to my project in visual studio and I can see all the methods I have created in my WCF interface: SupportStaffServiceClient client = new SupportStaffServiceClient("WSHttpBinding_ISupportStaffService"); client.myMethod(message); However when I call a method, which in the WCF interface is specified as returning a value, the method returns void in the console application. client.getMethod(message); The WCF service method is definitely returning a message, I'm just unsure as to why the client cannot "see" the return.

  Read the article

• Determine if getPixel() value is greater than or less than 50% gray

  - by cmal

  I am trying to loop through a bitmap and determine if each pixel is lighter or darker than gray using getPixel(). Problem is, I am not sure how to tell whether the value returned by getPixel() is darker or lighter than gray. Neutral gray is about 0x808080 or R:127, G:127, B:127. How would I need to modify the code below to accurately determine this? for (var dx:int=0; dx < objectWidth; dx++) { for (var dy:int=0; dy < objectHeight; dy++) { if (testBmd.getPixel(dx, dy) > GRAY) { trace("Lighter than gray!"); } else { trace("Darker than gray!"); } } }

  Read the article

• [Linq to SQL] Multiple foreign keys to the same table

  - by cdonner

  I have a reference table with all sorts of controlled value lookup data for gender, address type, contact type, etc. Many tables have multiple foreign keys to this reference table I also have many-to-many association tables that have two foreign keys to the same table. Unfortunately, when these tables are pulled into a Linq model and the DBML is generated, SQLMetal does not look at the names of the foreign key columns, or the names of the constraints, but only at the target table. So I end up with members called Reference1, Reference2, ... not very maintenance-friendly. Example: <Association Name="tb_reference_tb_account" Member="tb_reference" <====== ThisKey="shipping_preference_type_id" OtherKey="id" Type="tb_reference" IsForeignKey="true" /> <Association Name="tb_reference_tb_account1" Member="tb_reference1" <====== ThisKey="status_type_id" OtherKey="id" Type="tb_reference" IsForeignKey="true" /> I can go into the DBML and manually change the member names, of course, but this would mean I can no longer round-trip my database schema. This is not an option at the current stage of the model, which is still evolving. Splitting the reference table into n individual tables is also not desirable. I can probably write a script that runs against the XML after each generation and replaces the member name with something derived from ThisKey (since I adhere to a naming convention for these types of keys). Has anybody found a better solution to this problem?

  Read the article

• wpf binding by selected value - swap out bound object without disturbing binding

  - by Andy Clarke

  Hi, I've got combo box bound to a custom collection type - its basically an overridden ObservableCollection which I've added a facility to update the underlying collection (via Unity). I don't want to confuse the issue too much, but thats the background. My xaml looks like this <ComboBox ItemsSource="{Binding Manufacturers}" DisplayMemberPath="Name" SelectedValuePath="ID" SelectedValue="{Binding Vehicle.ManufacturerID}" /> And in my overridden collection i was doing this. index = IndexOf(oldItem); Insert(index, (T)newItem); RemoveAt(index + 1); I had hoped because it was bound by value, that inserting the new object(which had the same id) and then removing the old one would work. But it seems that although its bound by SelectedValue it still knows that its being swapped for a different one. The combo just looses its selection. Can anyone help please?

  Read the article

• Preventing Flex application caching in browser (multiple modules)

  - by Simon_Weaver

  I have a Flex application with multiple modules. When I redeploy the application I was finding that modules (which are deployed as separate swf files) were being cached in the browser and the new versions weren't being loaded. So i tried the age old trick of adding ?version=xxx to all the modules when they are loaded. The value xxx is a global parameter which is actually stored in the host html page: var moduleSection:ModuleLoaderSection; moduleSection = new ModuleLoaderSection(); moduleSection.visible = false; moduleSection.moduleName = moduleName + "?version=" + MySite.masterVersion; In addition I needed to add ?version=xxx to the main .swf that was being loaded. Since this is done by HTML I had to do this by modifying my AC_OETags.js file as below : function AC_FL_RunContent(){ var ret = AC_GetArgs ( arguments, ".swf?mv=" + getMasterVersion(), "movie", "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" , "application/x-shockwave-flash" ); AC_Generateobj(ret.objAttrs, ret.params, ret.embedAttrs); } This is all fine and works great. I just have a hard time believing that Adobe doesn't already have a way to handle this. Given that Flex is being targeted to design modular applications for business I find it especially surprising. What do other people do? I need to make sure my application reloads correctly even if someone has once per session selected for their 'browser cache checking policy'.

  Read the article

• Why exception occured at LoadTypeLibEx System.ArgumentException: Value does not fall within the exp

  - by Usman

  Hello, I am loading type library in C++/CLI. In C# its loading successfully but it's giving again and again following exception in managed C++/CLI. exception occured at LoadTypeLibEx System.ArgumentException: Value does not fall within the expected range at LoadTypeLib(String strTypeLibName, ITypeLi b typeLib) Here's a PInvoke Signature: [DllImport("oleaut32.dll", CharSet = CharSet::Unicode, PreserveSig = false)] static void LoadTypeLib(String^ strTypeLibName,[MarshalAs(UnmanagedType::Interface)] [Out] System::Runtime::InteropServices::ComTypes::ITypeLib^ typeLib); ITypeLib^ oTypeLib; and call LoadtypeLib(TLB,oTypeLib); I am stuck here..kindly give me way around to get rid of this exception Regards Usman

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >