Search Results

Search found 269 results on 11 pages for 'wonko the sane'.

Page 1/11 | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

  • Building SANE from git-source produce backend missmatch on 12.04 even if built locally

    - by deinonychusaur
    It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

    Read the article

  • Setting up SANED with sane-test

    - by Enoon
    I'm trying to setup a network service for running saned (running the sane-test backend) on Ubuntu 12.10, running it on a virtualbox. I followed the directions found here: https://help.ubuntu.com/community/ScanningHowTo and i got to the point where if i use a front-end like xsane, or use the command scanimage -d test i get the desired behaviour. (i get the test image). But when i try to use the network demon to access the backend (from the localhost) i get Failed to connect. I used telnet on 127.0.0.1 6566 and i got the following error: saned: symbol lookup error: saned: undefined symbol: sanei_w_init I'm a linux newbie, so i could be making some stupid mistake. Any ideas on how to fix this? Thanks [update]After posting this question i logged out, logged back in and it worked. After a few days i tried again and it gave the same error as before. Any help?

    Read the article

  • How do I get a CardScan 60 II working with SANE?

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • Problem with SANE and CardScan

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • Multiple ( V- / I- ) Buffers, is it sane?

    - by Techie
    Currently I am developing an RTS game using XNA ( / ANX.Framework ). There is one thing bothers me. I am not sure in what way or how to organise Buffers. Should I use a new Vertexbuffer for any object ( e.g. a Char, a Table, an model ) or is it better to use ONE HUGE/ BIG Buffer to store any geometry in? I am still new to 3D Programming though I finished yet couple games using DirectX 9. Well, I hope this question qin't a duplicate and I appreciate any answer leading me into the right direction.

    Read the article

  • Could it be sane to use Windows Server 2012 as desktop

    - by nCdy
    what about using it on desktop? I've got enough strong PC with intel core i7 and 8GB Ram so what should I think about: why not? Were looking about major differences compared to windows 8, found less. for example new file system - can it affect me? In my usual day I need development instruments alike visual studio, virtualization tools, and some games So far I can't find something that must stop me, everything I need can work (seems like) there. Tell me why I must not do it or if that is sane to do.

    Read the article

  • Sane patch schedule for Windows 2003 cluster

    - by sixlettervariables
    We've got a cluster of 75 Win2k3 nodes at work in a coarse grained compute cluster. The cluster is behind a mountain of firewalls and resides in its own VLAN. Jobs of all sizes and types run on the cluster and all of the executables running are custom-made. (ed: additional notes on our executables) The jobs range from 30 seconds to 7 days in duration, and may contain one executable or 2000 sub-jobs (of short duration). Obviously we are trying to avoid the situation where our IT schedules a reboot during a 7 day production job. We have scheduling software which accomodates all of the normal tasks for a coarse grained cluster and we can control which machines are active for submission, etc. If WSUS was in some way scriptable (or the client could state it's availability for shutdown) we could coordinate the two systems and help out. Currently, the patch schedule is the Sunday after Super Tuesday regardless of what is running on the cluster. We have to ask for an exemption every time we want to delay patching a machine for a long running production job. Basically, while our group is responsible for the machines we have little control over IT's patch schedule. Is patching monthly with MS's schedule sane for a production Windows cluster? Are there software hooks in WSUS where we could say, "please don't reboot just yet"?

    Read the article

  • Scan problem -Fujitu Scansnap S1300i

    - by user214312
    I'm trying to install a scansnap s1300i scanner on ubuntu 13.10. It is still not working. My question: With a "sudo scanimage -L" command, I receive the response device hpaio:/net/Photosmart_C5100_series?zc=HPBA915D' is a Hewlett-Packard Photosmart_C5100_series all-in-one deviceepjitsu:libusb:002:011' is a FUJITSU ScanSnap S1300i scanner While, with a "scanimage -L"command I receive the response device `hpaio:/net/Photosmart_C5100_series?zc=HPBA915D' is a Hewlett-Packard Photosmart_C5100_series all-in-one What can go wrong ? This is probably a part of the problem. Update: "simple-scan" do not work while "sudo simple-scan" works Thanks.

    Read the article

  • Are default mysql parameters in RDS sane?

    - by taw
    RDS uses the same set of parameters for all instance sizes and they don't seem to be that far from defaults (max_packet_size being too small etc.) Has anyone looked at them and reviewed them for how sensible they are, especially on relatively bigger instances?

    Read the article

  • Manipulating the address of a variable to store a smaller type?

    - by Sidnicious
    This is what I get for pampering myself with high-level programming languages. I have a function which writes a 32-bit value to a buffer, and a uint64_t on the stack. Is the following code a sane way to store it? uint64_t size = 0; // ... getBytes((uint32_t*)&size+0x1); I'm assuming that this would be the canonical, safe style: uint64_t size = 0; // ... uint32_t smallSize; getBytes(&smallSize); size = smallSize;

    Read the article

  • How can I easily retab html files according to some sane default?

    - by James
    I have some html files that I'd like to retab that look like this: <header> <div class="wrapper"> <img src="images/logo.png"> <div class="userbox"> <div class="welcome">Welcome Andy!</div> <div class="blackbox"> <ul> <li><a href="#">Invite Friends</a></li> <li><a href="#">My Account</a></li> <li><a href="#">Cart</a></li> <li><a href="#">Sign Out</a></li> </ul> </div> </div> </div> </header> And I want them to look something like this: <header> <div class="wrapper"> <img src="images/logo.png"> <div class="userbox"> <div class="welcome">Welcome Andy!</div> <div class="blackbox"> <ul> <li><a href="#">Invite Friends</a></li> <li><a href="#">My Account</a></li> <li><a href="#">Cart</a></li> <li><a href="#">Sign Out</a></li> </ul> </div> </div> </div> </header> Or some sane default. What's the easiest way to go about doing this from the terminal in ubuntu for all of the html files in the current directory?

    Read the article

  • What steps can you take to ensure sane build environments when compiling software?

    - by Chris Adams
    Hi guys, I've been stuck with a compilation problem when building a standardised virtual machine on CentOS 5.4, and I'm in the dark here as to a) why this error is occurring, and b) how to fix it, and in the hope that someone else stumbles across this problem too, I'm hoping someone can help me find the solution here. I'm getting a configure: error: newly created file is older than distributed files! error when trying to compile Ruby Enterprise like below when I try to run the installer, and the solutions offered to on the forums (of checking the tine, and touching the files to update the time associated with them) don't seem to be helping here. What steps can I take to work out what the cause of this problem? [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo ./installer Welcome to the Ruby Enterprise Edition installer This installer will help you install Ruby Enterprise Edition 1.8.7-2009.10. Don't worry, none of your system files will be touched if you don't want them to, so there is no risk that things will screw up. You can expect this from the installation process: 1. Ruby Enterprise Edition will be compiled and optimized for speed for this system. 2. Ruby on Rails will be installed for Ruby Enterprise Edition. 3. You will learn how to tell Phusion Passenger to use Ruby Enterprise Edition instead of regular Ruby. Press Enter to continue, or Ctrl-C to abort. Checking for required software... * C compiler... found at /usr/bin/gcc * C++ compiler... found at /usr/bin/g++ * The 'make' tool... found at /usr/bin/make * Zlib development headers... found * OpenSSL development headers... found * GNU Readline development headers... found -------------------------------------------- Target directory Where would you like to install Ruby Enterprise Edition to? (All Ruby Enterprise Edition files will be put inside that directory.) [/opt/ruby-enterprise] : -------------------------------------------- Compiling and optimizing the memory allocator for Ruby Enterprise Edition In the mean time, feel free to grab a cup of coffee. ./configure --prefix=/opt/ruby-enterprise --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... configure: error: newly created file is older than distributed files! Check your system clock This is a virtual machine running on virtualbox, and the time of the host and the virtual machine are identical, and up to date. I've also tried running this after updating time with an ntp-client, so no avail. I tried this after reading this post here of someone having a similar problem [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ date Tue Apr 27 08:09:05 BST 2010 The other approach I've tried is to touch the top level the files in the build folder like suggested here, but this hasn't worked either (an to be honest, I'm not sure why it would have worked either) [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo touch ruby-enterprise-1.8.7-2009.10/* I'm not sure what I can do next here - the problem seems to be the bash configure script that returns this error error: newly created file is older than distributed files!, at line :2214 { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi ### PROBLEM LINE #### # this line is the problem line - this is returned true, sometimes it isn't and I can't # see a pattern that that determines when this will test will pass or not. test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi the thing that makes this really frustrating is that this script works sometimes, when the VM has been running for an hour or so it works, but not at boot. There's nothing I see in the crontab that suggests any hourly tasks are run that might change the state of the system enough make a difference to this script working. I'm totally at a loss when it comes to debugging beyond here. What's the best approach to take here? Thanks

    Read the article

  • Breaking 1NF to model subset constraints. Does this sound sane?

    - by Chris Travers
    My first question here. Appologize if it is in the wrong forum but this seems pretty conceptual. I am looking at doing something that goes against conventional wisdom and want to get some feedback as to whether this is totally insane or will result in problems, so critique away! I am on PostgreSQL 9.1 but may be moving to 9.2 for this part of this project. To re-iterate: Does it seem sane to break 1NF in this way? I am not looking for debugging code so much as where people see problems that this might lead. The Problem In double entry accounting, financial transactions are journal entries with an arbitrary number of lines. Each line has either a left value (debit) or a right value (credit) which can be modelled as a single value with negatives as debits and positives as credits or vice versa. The sum of all debits and credits must equal zero (so if we go with a single amount field, sum(amount) must equal zero for each financial journal entry). SQL-based databases, pretty much required for this sort of work, have no way to express this sort of constraint natively and so any approach to enforcing it in the database seems rather complex. The Write Model The journal entries are append only. There is a possibility we will add a delete model but it will be subject to a different set of restrictions and so is not applicable here. If and when we allow deletes, we will probably do them using a simple ON DELETE CASCADE designation on the foreign key, and require that deletes go through a dedicated stored procedure which can enforce the other constraints. So inserts and selects have to be accommodated but updates and deletes do not for this task. My Proposed Solution My proposed solution is to break first normal form and model constraints on arrays of tuples, with a trigger that breaks the rows out into another table. CREATE TABLE journal_line ( entry_id bigserial primary key, account_id int not null references account(id), journal_entry_id bigint not null, -- adding references later amount numeric not null ); I would then add "table methods" to extract debits and credits for reporting purposes: CREATE OR REPLACE FUNCTION debits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount < 0 THEN $1.amount * -1 ELSE NULL END; $$; CREATE OR REPLACE FUNCTION credits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount > 0 THEN $1.amount ELSE NULL END; $$; Then the journal entry table (simplified for this example): CREATE TABLE journal_entry ( entry_id bigserial primary key, -- no natural keys :-( journal_id int not null references journal(id), date_posted date not null, reference text not null, description text not null, journal_lines journal_line[] not null ); Then a table method and and check constraints: CREATE OR REPLACE FUNCTION running_total(journal_entry) returns numeric language sql immutable as $$ SELECT sum(amount) FROM unnest($1.journal_lines); $$; ALTER TABLE journal_entry ADD CONSTRAINT CHECK (((journal_entry.running_total) = 0)); ALTER TABLE journal_line ADD FOREIGN KEY journal_entry_id REFERENCES journal_entry(entry_id); And finally we'd have a breakout trigger: CREATE OR REPLACE FUNCTION je_breakout() RETURNS TRIGGER LANGUAGE PLPGSQL AS $$ BEGIN IF TG_OP = 'INSERT' THEN INSERT INTO journal_line (journal_entry_id, account_id, amount) SELECT NEW.id, account_id, amount FROM unnest(NEW.journal_lines); RETURN NEW; ELSE RAISE EXCEPTION 'Operation Not Allowed'; END IF; END; $$; And finally CREATE TRIGGER AFTER INSERT OR UPDATE OR DELETE ON journal_entry FOR EACH ROW EXECUTE_PROCEDURE je_breaout(); Of course the example above is simplified. There will be a status table that will track approval status allowing for separation of duties, etc. However the goal here is to prevent unbalanced transactions. Any feedback? Does this sound entirely insane? Standard Solutions? In getting to this point I have to say I have looked at four different current ERP solutions to this problems: Represent every line item as a debit and a credit against different accounts. Use of foreign keys against the line item table to enforce an eventual running total of 0 Use of constraint triggers in PostgreSQL Forcing all validation here solely through the app logic. My concerns are that #1 is pretty limiting and very hard to audit internally. It's not programmer transparent and so it strikes me as being difficult to work with in the future. The second strikes me as being very complex and required a series of contraints and foreign keys against self to make work, and therefore it strikes me as complex, hard to sort out at least in my mind, and thus hard to work with. The fourth could be done as we force all access through stored procedures anyway and this is the most common solution (have the app total things up and throw an error otherwise). However, I think proof that a constraint is followed is superior to test cases, and so the question becomes whether this in fact generates insert anomilies rather than solving them. If this is a solved problem it isn't the case that everyone agrees on the solution....

    Read the article

  • Scanner that worked with Ubuntu 10.4 cannot be found by 13.4

    - by stevecoh1
    My computer previously ran Ubuntu 10.4. After upgrading to 13.4, my Epson scanner no longer can be found by the system. Following documentation, I find the following: $ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not open USB device 0x046d/0x082b at 001:007: Access denied (insufficient permissions) ... # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. ... If I instead run sudo sane-find-scanner, I get $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8 [EPSON], product=0x0131 [EPSON Scanner]) at libusb:001:009 could not fetch string descriptor: Pipe error could not fetch string descriptor: Pipe error # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. So what do I do? scanimage -L does nothing for me and I don't know what the "backend's manpage" might be. It's seems likely that this is a permissions issue since the scanner can be found as root, but I don't know how to solve it. Can someone help?

    Read the article

  • Why changing signals causes NameErrors in a sane code? - PyGtk issue

    - by boywithaxe
    I'm working on a very simple app for Ubuntu. I've asked a question on stackoverflow, and it seems that the issue I am having is caused by signals, not by the scope of variables, as I originally thought. The problem I am having is that when TextBox emits a signal through activate the whole code works without a glitch. But when I change the signal to insert-at-click it returns NameErrors in every non-TextBox-linked function. Now, It is highly possible I am doing something completely wrong here, but is it at least probable that signals could affect global variable assignments?

    Read the article

  • Using Mercurial repository inside a Git one: Feasible? Sane?

    - by Portablejim
    I am thinking on creating a Mercurial repository under a Git repository. e.g. ..../git-repository/directory/hg-repo/ The 2 repositories Is it possible to manage (keeping your sanity)? How similiar is it to this? I am a computer science student at University. I manage my work in Git, mainly as a distribution mechanism (after realizing that rsync fails when you have changes in more than one place) between my desktop and usb drive. I try use of Git as a VCS as I do work. I have finished a semester where I did a small group project to prepare for a larger group project next year. We had to use Subversion, and experienced the joys of a centralised VCS (including downtime). I tried to keep the subversion repository separate to my Git repository for the subject**, however it was annoying that it was seperate (not in the place where I store assignments). I therefore moved to using an Subversion repository inside my Git repository. As I think ahead (maybe I am thinking too far ahead) I realise that I will have to try and convince people to use a DVCS and Mercurial will probably be the one that is preferred (Windows and Mac GUI support, closer to Subversion). Having done some research into the whole Git vs Mercurial debate (however not used Mercurial at all) I still prefer Git. Can I have a Mercurial repository inside a Git one without going mad (or it ruining something)? Or is it something that I should not consider at all? (Or is it a bad question that should be deleted?) ** I think outside of Australia it is called a course

    Read the article

  • Sane(r) way to get character-encoding of CLI?

    - by danyowdee
    Hi all! I was writing a CLI-Tool for Mac OS X (10.5+) that has to deal with command-line arguments which are very likely to contain non-ASCII characters. For further processing, I convert these arguments using +[NSString stringWithCString:encoding:]. My problem is, that I couldn't find good information on how to determine the character-encoding used by the shell in which said cli-tool is running in. What I came up with as a solution is the following: NSDictionary *environment = [[NSProcessInfo processInfo] environment]; NSString *ianaName = [[environment objectForKey:@"LANG"] pathExtension]; NSStringEncoding encoding = CFStringConvertEncodingToNSStringEncoding( CFStringConvertIANACharSetNameToEncoding( (CFStringRef)ianaName ) ); NSString *someArgument = [NSString stringWithCString:argv[someIndex] encoding:encoding]; I find that a little crude, however -- which makes me think that I missed out something obvious...but what? Is there a saner/cleaner way of achieving essentially the same? Thanks in advance D

    Read the article

  • Silverlight MergedDictionary - Attribute Value out of Range

    - by Wonko the Sane
    Hello All, I have a Silverlight-3 solution that contains a few different projects. I want to have one "common" project for holding controls and resources that will be used by multiple other projects. Within the common project, there is a folder called Resources, which holds a ResourceDictionary (CommonColors.xaml). This is set to be built as a Resource, Do Not Copy. I add a reference to the common project in another project (call it UncommonControls), and attempt to add the ResourceDictionary as a MergedDictionary: <UserControl.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/Common;component/Resources/CommonColors.xaml" /> <ResourceDictionary Source="/UncommonControls;component/Resources/UncommonStyles.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </UserControl.Resources> When I try to run, I get an exception: Attribute /Common;component/Resources/CommonColors.xaml value is out of range. [Line: 14 Position: 44] --- Inner Exception --- The given key was not present in the dictionary. However, if I reference a ResourceDictionary local to Uncommon (such as the UncommonStyles.xaml, above) project, which is set up with the same Build properties, it works fine. I haven't seen anything that says SL3 can't reference an external ResourceDictionary (on the contrary, I've seen an example of using one, albeit with no downloadable project to verify the behavior). Thanks, Wonko

    Read the article

  • Refreshing Read-Only (Chained) Property in MVVM

    - by Wonko the Sane
    I'm thinking this should be easy, but I can't seem to figure this out. Take these properties from an example ViewModel (ObservableViewModel implements INotifyPropertyChanged): class NameViewModel : ObservableViewModel { Boolean mShowFullName = false; string mFirstName = "Wonko"; string mLastName = "DeSane"; private readonly DelegateCommand mToggleName; public NameViewModel() { mToggleName = new DelegateCommand(() => ShowFullName = !mShowFullName); } public ICommand ToggleNameCommand { get { return mToggleName; } } public Boolean ShowFullName { get { return mShowFullName; } set { SetPropertyValue("ShowFullName", ref mShowFullName, value); } } public string Name { get { return (mShowFullName ? this.FullName : this.Initials); } } public string FullName { get { return mFirstName + " " + mLastName; } } public string Initials { get { return mFirstName.Substring(0, 1) + "." + mLastName.Substring(0, 1) + "."; } } } The guts of such a [insert your adjective here] View using this ViewModel might look like: <TextBlock x:Name="txtName" Grid.Row="0" Text="{Binding Name}" /> <Button x:Name="btnToggleName" Command="{Binding ToggleNameCommand}" Content="Toggle Name" Grid.Row="1" /> The problem I am seeing is when the ToggleNameCommand is fired. The ShowFullName property is properly updated by the command, but the Name binding is never updated in the View. What am I missing? How can I force the binding to update? Do I need to implement the Name properties as DependencyProperties (and therefore derive from DependencyObject)? Seems a little heavyweight to me, and I'm hoping for a simpler solution. Thanks, wTs

    Read the article

  • Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

    - by nutty about natty
    For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

    Read the article

  • Using virt-install to mount multiple cdrom drives/images

    - by Dana the Sane
    I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it, i.e.: Setup could not read the CD you inserted, or the CD is not a valid Windows CD.. Is there a work-around for this?, my Googling didn't uncover anything. I've tried various combinations of mounting .iso files and specifying disks, such as: $sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom --check-cpu If I try to specify multiple cdrom drives, I receive an error: virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 --check-cpu Starting install... ERROR IDE CDROM must use 'hdc', but target in use.

    Read the article

  • IE8 Crash On Startup

    - by Wonko the Sane
    Hello All, I have a problem - IE8 has suddenly stopped working. I was doing some development work, and suddenly IE8 crashed every time I tried to use it. I've rebooted, but still crash every time I try to open it. There is no real indication as to what has gone wrong. It just says "Internet Explorer has stopped working". I've tried almost everything that I've seen when I've Googled it: I disabled all Add-Ins via Manage Add-Ins, but it still crashes on startup* I re-registered IEPROXY.DLL * The thing I don't understand is that if I start from the Run box with the -extoff option, IE starts up. Isn't that the same as disabling all Add-Ins? Any ideas? Thanks, wTs

    Read the article

  • Tool for purging unneeded backups

    - by Dana the Sane
    I'm in the common situation where the one of the linux servers I use for storing backups is filling up. I'm wondering what tools are available for doing this. Ideally, what I would like is something that keeps nightlies for the previous month, weeklies for the 2nd to 5th preceding months and retains monthlies (well, every 3rd week) for an indefinite period. Everything that falls outside of that would be deleted after the backups are run. I could write a script to do this, but I feel like there must be a standard tool for this task.

    Read the article

  • What does "Application Server" in Windows Server 2008 mean?

    - by In Sane
    When seeing the Windows Server 2008 R2 edition comparision by Role, i noticed that there is an entry for Application Server separate from that of IIS. http://www.microsoft.com/windowsserver2008/en/us/r2-compare-roles.aspx What is confusing me is that for Web edition, "Application Server" is not ticked but IIS is ticked. Isnt IIS both the web server and the application server in Windows? And if so, if i take the web edition, can i not host my business components (WCF services)on it because it is not an "Application Server" ?

    Read the article

  • WPF Delay Refresh of UI Elements in ItemsControl

    - by Wonko the Sane
    Hello All, The short question is - how can I prevent (delay) a bound UI element from refreshing until I want it to? The longer explanation: I have a process that adds a number of items to an ItemsControl, and then performs some additional calculations on those items using a background thread. This (correctly) updates the items as it goes along. However, I would like to prevent the ItemsControl from updating during a particular calculation, as it performs some reordering of the items before it does additional calculations based on that order, and then returns the items to their original order. I do show a "Please Wait" animation on top of the ItemsControl, with the ItemsControl dimmed down as it is working, but I'd rather not hide the ItemsControl entirely because it gives the user an indication that progress is being made. Thanks, wTs

    Read the article

1 2 3 4 5 6 7 8 9 10 11  | Next Page >