Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 253/740 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• System freeze after opening Wi-Fi menu can boot into the machine and use Internet in recovery mode

  - by Michael

  So right now sitting in front of my Alienware area 51 desktop. It has a Broadcom Netlink BCM 5784M gigabit ethernet PCI E card. Most of the time able to get through the login screen and to the main screen if I click on the wireless settings on the top right-hand corner the system immediately freezes the cursor does not move at all keyboards are unresponsive. I was doing some quick Google searching and I found a suggestion to boot into recovery mode I did this and did a apt-get Distribution update which ran successfully installed then I rebooted into the regular system same thing I'm pretty sure it's the network card because even if I don't click the settings if a network related dialog opens such as disconnection or connection the system again immediately freezes. I'm running Ubuntu 13.04 ** update 1 ** Just was able to use my system for a little bit however when I went into Firefox and hit the web it again froze so obviously a driver problem but I'm not sure how to get drivers for Broadcom which apparently according to the description on stack-overflow is terrible Any ideas? Sorry for lack of punctuation on an ipad.

  Read the article

• Strategy to prevent players from seeing through walls in an online FPS?

  - by geneotech

  Why do we still moan on wallhackers in multiplayer first-person shooters ? Isn't it possible to perform occlusion culling for all players server-side ? For example, send player xyz information to client only when the player is visible in client's frustum and not occluded by any object ? Even if the collision-geometry is very simplified, most of the time cheater won't receive tactical information. Why not do this ?

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• SS7(M3UA, SCCP, TCAP, MAP) Stack

  - by Ammar Hameed

  I'm building an open source SMSC from scratch; it's almost finished, The SRI and the forwardSM operations are working, but I still have few things to do for the receiving part. I've built the SS7 stack already, but I'm using DB for saving the TCAP transactions IDs to be updated later to get/generate responses. My approach is this: I created memory table (heap table), saved the TCAP TID in the database, then compared the received TCAP TID with the TIDs saved in the database and then decide whether to end the TCAP session or continue. What is the best way to implement it? I'm thinking of doubly linked list that holds the TCAP TID. Am I going towards the right direction, or should I use another technique other than database or D-linked list? Should I leave it as it is, and let the database do the job for saving the TIDs? Please note that I'm using SCTP implementation available on Linux (lsctp) as a transport protocol, the language I'm using is C and the DB is MYSQL.

  Read the article

• A simple example of movement prediction

  - by Daniel

  I've seen lots of examples of theory about the reason for client-side prediction, but I'm having a hard time converting it into code. I was wondering if someone knows of some specific examples that share some of the code, or can share their knowledge to shed some light into my situation. I'm trying to run some tests to get a the movement going (smoothly) between multiple clients. I'm using mouse input to initiate movement. I'm using AS3 and C# on a local Player.IO server. Right now I'm trying to get the Client side working, as I'm only forwarding position info with the client. I have 2 timers, one is an onEnterFrame and the other is a 100ms Timer, and one on mouseClick listener. When I click anywhere with a mouse, I update my player class to give it a destination point On every enterFrame Event for the player, it moves towards the destination point At every 100ms it sends a message to the server with the position of where it should be in a 100ms. The distance traveled is calculated by taking the distance (in Pixels) that the player can travel in one second, and dividing it by the framerate for the onEnterFrame handler, and by the update frequency (1/0.100s) for the server update. For the other Players, the location is interpolated and animated on every frame based on the new location. Is this the right way of doing it?

  Read the article

• keep getting added to hosts.deny + iptables

  - by Sc0rian

  I am confused to why this has started to happen. On my local network, if I click 10-20 apache/http links my server will decide to add me hosts.deny file and block me on iptables. Its not just apache, it seems to happen with any kinda of traffic, that comes in on a flood method. Like I use subsonic, if I change tracks 10-20 times, it will do it. I would assume I have some sort of firewall which is sitting on the server which is doing this. However I do not have fail2ban or any denyhosts in /var/lib. I cannot work out why I keep getting added to hosts.deny/iptables. Thanks

  Read the article

• WINDOWS 7 DEAD BLUE SCREEN DOES NOT REBOOT OR INSTALL NEW WIN OS

  - by ADAM

  Windows died. So, I installed ubuntu, and have had difficulties downloading apps from the internet like skype or realplayer... etc. And It does not recognize my password. I needed to install drivers for my wireless from cd-rom. It does not show where to save new downloaded files and programs, and app and does not show how to install like windows does. So I would like to go back to windows. Window does not not start up anymore and I can not get safe mode with F8. It goes to black screen only and none of other parameters work when press f8! Any help is highly valued.

  Read the article

• accessing files on a shared folder via IIS

  - by Darkcat Studios

  Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

  Read the article

• Network connection on an Acer Aspire 5253?

  - by fuquam

  Brand new to Ubuntu and PCs for that matter. I've been a Mac user all my life but wanted to try Ubuntu on the cheap so I bought an Acer laptop 5253-BZ893. I got Ubuntu 10.10 installed with no problem. The only problem I have is I have no network connection options, wired or wireless. I just get "No Network Devices Available". The computer came with Windows 7 installed and I'm able to connect to my wireless network fine using Windows so I know the computer works. I've been searching forums and google for hours trying to figure out why I can't get a network connection using Ubuntu but so far no luck. Any suggestions? Thanks in advance.

  Read the article

• trouble detecing huawei EC156 in ubuntu 12.04

  - by naina

  the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

  Read the article

• Creating a new DHCP lease databse

  - by Stee1bear

  I have Ubuntu Server set up as my DCHP server. We have had it install for a few year and our dchp.lease file contain over 4000 entries. I am wanting to clean it up and basically start a new lease file to get current list (@1500 entries). I have read the walk through on how to make a new lease file and get it started, which leads me to this question. Will the dhcp server try to give each unit new IP address or will it build the new database with the IP addresses that the the units report to it?

  Read the article

• Client side prediction/simulation Question

  - by Legendre

  I found a related question but it doesn't have what I needed. Client A sends input to move at T0. Server receives input at T1. All clients receive the change at T2. Question: With client-side prediction, client A would start moving at T0, client-side. All other clients receive the change at T2, so to them, client A only started moving at T2. If I understand correctly, client B will always see client A's past position and not his current position? How do I sync both client B and client A?

  Read the article

• How to change Port 27000 from filtered to open status

  - by Nadarajah Ranjan

  In my ubuntu box I am running flexlm licensing software on port 27000 and I am able to pull the license from the this port to run the simulation software locally. I am also trying to run the same software in another Linux machine (opensuse) by using the flexlm license from the Ubuntu box. However, my opensuse box is unable to communicate with port 27000 in my Ubuntu box. I have turned off the firewall on the Ubuntu box, played around with iptables and when I do a nmap from my opensuse box to Ubuntu box the message I get is that port 27000 is on filtered status. My understanding is that filtered status does not allow the opensuse box to communicate with Ubuntu. My question is how to change port 27000 from filtered status to open status? Hope someone can help me out. Thank you.

  Read the article

• Static IP breaks Network connection

  - by Pasquale Tedesco

  I am somewhat new to Linux. I am setting up a Web server and installed Ubuntu server 14.04 on an vSphere ESXi 5.5 host. I am connecting perfectly fine to the internet when using DHCP but when I apply my Static settings I loose the ability to connect to websites. Whats weird is I can Ping google.com but if I try wget gooogl.com it hangs at connecting to google.com (google.com):173.194.43.32:80 and I get "failed: connection refused" But if I am set to DHCP the connection resolves perfectly. Thanks # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 10.1.2.25 gateway 10.1.2.2 netmask 255.255.255.0 search tsig.com dns-nameservers 10.1.2.13 10.1.2.30

  Read the article

• Wireless Disabled (Network Manager)

  - by Peter Kihara

  Am Having issues with My Wireless 1 My laptop had dual boot windows 7 and Ubuntu 13.04 I upgraded to windows 8 and after the first 2-3 reboots all was working well in windows and ubuntu then my wireless in ubuntu stoped working saying "wifi is disabled by hardware switch" the hardware switch has no effect I removed network manager installed new firmwares and still nothing the wifi was not working in a moment of testing I installed wifi radar and this can detect the wireless signals and at one point it connected but still Network manger still says disabled. My Laptop is a HP Pavilion dm4 2070us with Wireless Centrino N 1000 I have updated to 13.10 thinking it would fix it but still nothing

  Read the article

• Difference between a socket and a port

  - by cobie

  Could someone please explain quite clearly the difference between a port and a socket. I know that a port serves as a door into the network for an application process and that the application process uses a socket connection to the given port number to handle network communication but when you have multiple processes listening on a single port number, I am finding it difficult to understand the difference between the socket and the port and how they all fit together.

  Read the article

• After update UBUNTU 12.04 changes wired interface from eth0 to eth1, network configuration fails

  - by Don McLaren

  I have been running UBUNTU 12.04 for a couple of months on this system with no problems. After a recent update, the bootup fails to define the wired network interface as eth0, so the default network configuration fails. ifconfig -a shows eth1 instead, as unconfigured. Booting from CD works OK, configures eth0 as normal. Solution: sudo NetworkManager The network manager figures out the situation, and configures eth1 Question: Where did this problem come from all of a sudden?

  Read the article

• Ubuntu 12.04 USB wireless not recognized

  - by Justin

  I have searched for awhile now for ways to fix my problem but have come up with nothing. I am running Ubuntu 12.04 on my desktop computer. I am unable to find the Enable Wireless button in the network area. It just doesn't appear. Everything else works on my laptop. I believe it's the drivers for my USB network adapter. I also have no way of using a wired connection at the moment. Thanks for any help!

  Read the article

• Internet stopped working suddenly on 12.04

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the Internet at home anymore. I am only able to access the router, but no Internet access. A have a Dell Latitude E6320 with Ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via Wireless and Ethernet. At home, if I try connecting it through Windows, it does work fine. I even checked the MAC address and it's OK. My other laptop, which also runs Ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependencies. Can anyone help me please? I am afraid, I will have to reinstall everything.

  Read the article

• Computer becomes unreachable on lan after some time

  - by Ashfame

  I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

  Read the article

• No Wireless Networks, BCM4313 [duplicate]

  - by TalonPlz

  This question already has an answer here: How to Install Broadcom Wireless Drivers (BCM43xx) 38 answers Just bought this little Asus 10 inch laptop that came with Ubuntu 12.04. Everything at my home was fine: Wireless identified and connected. As soon as I went to my girlfriend's house the trouble started. I couldn't connect to wireless (authentication... times out and asks for authentication) I started doing internet searching, tried a few solutions posted on line using terminal commands. No solutions. I decided to upgraded to 12.10-13.04 and that left me with a worse problem: I can no longer see ANY networks what so ever. Wireless card is ON, with out a doubt. Wired connection works. I have been fumbling with driver versions to no .avail, and have no idea which driver I am currently running I have a vague idea of what terminal lines to run: lshw: resources: irq:17 memory:f7d00000-f7dfffff *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth2 version: 01 serial: dc:85:de:56:c4:ea width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f7d00000-f7d03fff iwconfig: eth1 no wireless extensions. eth2 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. I am new and excited to start my Ubuntu and Linux life and this is only the first of my few hic cups i am sure! :) Thanks all UPDATE: Report from 2nd answer talon@Black1015E:~$ sudo apt-get remove --purge bcmwl-kernel-source [sudo] password for talon: Reading package lists... Done Building dependency tree Reading state information... Done Package 'bcmwl-kernel-source' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. talon@Black1015E:~$ wget http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb --2013-10-22 18:50:32-- http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb Resolving us.archive.ubuntu.com (us.archive.ubuntu.com)... 2001:67c:1562::15, 2001:67c:1562::13, 2001:67c:1562::14, ... Connecting to us.archive.ubuntu.com (us.archive.ubuntu.com)|2001:67c:1562::15|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1181334 (1.1M) [application/x-debian-package] Saving to: ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ 100%[======================================>] 1,181,334 3.37MB/s in 0.3s 2013-10-22 18:50:33 (3.37 MB/s) - ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ saved [1181334/1181334] talon@Black1015E:~$ arvh No command 'arvh' found, did you mean: Command 'arch' from package 'coreutils' (main) arvh: command not found talon@Black1015E:~$ arch x86_64 talon@Black1015E:~$ sudo dpkg -i bcmwl*.deb Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 171895 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... First Installation: checking all kernels... Building only for 3.8.0-32-generic Building for architecture x86_64 Building initial module for 3.8.0-32-generic Done. wl: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.8.0-32-generic/updates/dkms/ depmod........ DKMS: install completed. Error: Module b43 is not currently loaded Error: Module b43legacy is not currently loaded Error: Module ssb is not currently loaded Error: Module bcm43xx is not currently loaded Error: Module brcm80211 is not currently loaded Error: Module brcmfmac is not currently loaded update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-32-generic rebooting now

  Read the article

• Syncing properties across a game server

  - by Vaughan Hilts

  I'm beginning to implement a simple scripting system into my networked server, and I've hit a snag. Before, I've been wrapping my calls into functions on objects that manipulate objects, but lately I've been finding this to be a pain for simple things. For example, if I set 'player.HP = 1'.. this works server-side. But the player side never sees this change unless I explicitly send a packet to inform the client. For many things like map swapping that require more complicated changes, like change X, Y, Map and do this.. I have a function. That's fine. But what about these small properties I want to sync?

  Read the article

• ubuntu nic card issue

  - by Blainer

  I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

  Read the article

• Wireless ad-hoc network between Ubuntu and MS Windows

  - by nixnotwin

  I have setup a wireless ad-hoc connection between two laptops: one running ubuntu and the other MS XP. I have assigned static IP to both the laptops and both get connected quite easily. I can access all ubuntu services like ssh, squid, samba from the laptop running MS Windows. But from Ubuntu machine I cannot access any Windows services like shared directories etc. The Windows machine doesn't even respond to ping requests from ubuntu.

  Read the article

• How to restart WiFi interface without rebooting (it drops connection)?

  - by Dima

  I boot into ubuntu and it connects to the Wifi network fine. After about 10-15min the DNS stop resolving any website and a couple of minutes later network-managers tells me that I'm disconnected and tries to reconnect constantly to my router and fails to do it. Upon Ubuntu restart everything works fine for the first 10-15min again. When I boot into Mac OS X everything is fine with the same connection! How do I restart wifi interface? sudo ifdow wlan0 just tells me that wlan0 is not configured and wlan0 doesn't appear in /etc/network/interfaces either, which I find strange.... (unless network-manager is doing it behind my back).

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >