Search Results

Search found 8664 results on 347 pages for 'lost with coding'.

Page 254/347 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Optimal video resolution and encoding for recording games for YouTube?

  - by Rookie

  I want to record video from games, therefore I cannot use very large video resolution, but I still want to make the large video view to look as sharp as the original encoded video before upload. I tried to use YouTube's recommended 854x640 resolution, but it wasn't possible with h264 and the encoding software I used (Handbrake) converted it to a width of the nearest multiple of 4, which I think is a limitation of the h264 format. The video I encoded was sharp and fine quality, but when I uploaded it to YouTube, it lost a lot of quality and the preferred large video view looks almost as bad as a 320p video. I tried to wait a few days but it never got sharper (in case it didn't process it completely yet). So, which resolution and encoding options I should use, if I want the large video player to have the sharpest possible video, retaining the original video quality as good as possible? I noticed that recording with 640x480, the video was sharper than with 1280x720, so I'm not sure what im doing wrong here; both were h264. Is it anyhow possible to prevent YouTube from re-encoding the videos? I just wonder how people can make so sharp videos, while mine are all blurry after upload, but before upload they looked fine. I also tried YouTube's suggested bitrates with h264, but it didn't work any better.

  Read the article

• Access denied to external USB disk; update access rights fails in Windows 8

  - by gerard

  I use to work with 2 laptops (Windows vista and Windows 7), my work files being on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take Windows 8. I suspect something changed with access rights, as my external disk suffered some "access denied" problem on Windows. I was prompted (by Windows 8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying disk is not ready Additionally, my external usb disk somehow was not recognized anymore. Back to Windows 7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them I could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under Windows 7, all the folder showed with a lock. Then back again to Windows 8. Same problem : access denied to my disk + no way to change access rights as it gets stuck disk is not ready". Now I am pretty sure there is some kind of bug or inconsistency in Windows 8 / Windows 7. I did 2. and 3. a few times. At some point, I also got an access denied in Windows 7. I could restore access rights to the disk to "System" (properties - security - EDIT for full control to group "system". ). But then I still get the same access right pb on Windows 8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. I upgraded Windows8 with the Windows8 updates available. Does not help.

  Read the article

• How to publish internal data to the internet - as simple as possible

  - by mlarsen

  I Asked this at Staock Overflow, but I would like your oppinion too as it has as much to do with administration as it does with coding. We have a .net 2-tier application where a desktop program is talking to a database. We support MS SQL Server 2000, 2005, 2008 and Oracle 9, 10 and 11. The application is sold, not as shrink-wrap, but pretty close. It is quite important for us that the installation and configuration is as easy as possible as installation instructions are usually supplied in written form to the customers internal IT-department. Our application is usually not seen as mission critical for the IT-department, so we need to keep their work down to a minimum. Now we are starting to get wishes for a web application build on top of the same data. The web application will be hosted by us and delivered as a SaaS application. Now the challenge is how to move data back and forth between the web application and the customers internal database. as I see it we have some requirements: We must be ready to handle the situation where the customers database is not accessible from the DMZ. I guess the easiest solution is that all communication is initiated from inside the customers lan. As little firewall configuration as possible. The best is if we can run without any special configuration as long as outgoing traffic from the customers lan are not blocked. If we need something changed in the firewall, we must be able to document that the change is secure. It doesn't have to be real time. Moving data in batches every ten minutes or so is OK. Data moves both ways, but not the same tables, so we don't have to support merges. It would be nice if we don't have to roll our own framework completely. Looking forward to hear your suggestions.

  Read the article

• Slowdown upon router/modem setup change

  - by Ollie Saunders

  I’ve been using a Belkin FSD7632-4 modem router to connect to my TalkTalk provided ADSL internet connection for some time and been pretty happy with it. Recently, however, the connection has been failing and I decided to get a ASUS RT-N16 instead, which is also a much more capable router generally. The ASUS RT-N16 doesn’t come with a modem built-in so I purchased as Zoom modem as well. I’ve set them both up and am using them to post this message. But I’m a bit miffed to find that I get a significantly and consistently slower downstream rate from the new configuration than with the old Belkin. Belkin modem router: downstream: 3.45 mbps upstream: 0.73 mbps ASUS router + Zoom modem: downstream: 2.71 mbps upstream: 0.66 mbps Any ideas why this is? The really weird thing about this is that the Zoom supports ADSL2 and ADSL2+ but I don’t think the old Belkin does. At first I thought it might be due to the Zoom modem being limited to PPPoE instead of PPPoA, which my ISP supports, but then I tried using PPPoE with the Belkin and that still gave a high speed. I’m using VC-Mux encapsulation with both. VPI of 0 and VCI of 38. I pulled this data off the Zoom: Mode: ADSL2 Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 12.3 11.8 Attenuation (dB): 43.0 24.9 Output Power (dBm): 12.9 0.0 Attainable Rate (Kbps): 3936 844 Rate (Kbps): 3194 840 MSGc (number of bytes in overhead channel message): 59 10 B (number of bytes in Mux Data Frame): 99 14 M (number of Mux Data Frames in FEC Data Frame): 2 16 T (Mux Data Frames over sync bytes): 1 8 R (number of check bytes in FEC Data Frame): 8 8 S (ratio of FEC over PMD Data Frame length): 1.9833 9.0594 L (number of bits in PMD Data Frame): 839 219 D (interleaver depth): 32 2 Delay (msec): 15 4 Super Frames: 15808 14078 Super Frame Errors: 0 4294967232 RS Words: 513778 111753 RS Correctable Errors: 126 4294967238 RS Uncorrectable Errors: 0 N/A HEC Errors: 0 4294967279 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 1920175 237597 Data Cells: 205993 392 Bit Errors: 0 0 Total ES: 0 0 Total SES: 0 0 Total UAS: 34 0

  Read the article

• Postfix message ID originating process?

  - by Anders Braüner Nielsen

  Last night my postfix mail server(Debian Squeeze with dovecot, roundcube, opendkim and spamassassin enabled) started sending out spam from a single domain of mine like these: $cat mail.log|grep D6930B76EA9 Jul 31 23:50:09 myserver postfix/pickup[28675]: D6930B76EA9: uid=65534 from=<[email protected]> Jul 31 23:50:09 myserver postfix/cleanup[27889]: D6930B76EA9: message-id=<[email protected]> Jul 31 23:50:09 myserver postfix/qmgr[7018]: D6930B76EA9: from=<[email protected]>, size=957, nrcpt=1 (queue active) Jul 31 23:50:09 myserver postfix/error[7819]: D6930B76EA9: to=<[email protected]>, relay=none, delay=0.03, delays=0.02/0/0/0, dsn=4.4.2, status=deferred (delivery temporarily suspended: lost connection with mta5.am0.yahoodns.net[66.196.118.33] while sending RCPT TO) The domain in question did not have any accounts enabled but only a catchall alias set through postfixadmin - most emails were send from a specific address I use frequently but some were also sent from bogus addresses. None of the other virtual domains handled by postfix were affected. How can I find out what process was feeding postfix/sendmail or more info on where they originated? As far as I can tell php mail() wasn't used and I've run several open relay tests. I did a little tinkering(removed winbind from the server and ipv6 addresses from main.cf) after the attack and it seems to have subsided but I still have no idea how my server was suddenly sending out spam. Maybe I fixed it - maybe I didn't. Can anyone help figuring out how I was compromised? Anywhere else I should look? I've run Linux Malware Detect on recently changed files but nothing found.

  Read the article

• Setting up squid proxy server to in turn connect using another proxy server [closed]

  - by AnkurVj

  My institute uses the Squid proxy server and authentication mechanism requires username and password to be entered. This means that, I can log in on only one machine at a time and Internet access for me is restricted to that machine. I sometimes require Internet access on multiple machines simultaneously. What previosuly worked for me was the following : On one of my own machines A, I set up a Squid proxy server that allowed all local machines without any username and password. I configured rest of the machines to use this machine A as the proxy server. On machine A I logged into the institute proxy server using my browser. This way, I could access Internet from all my machines, by effectively channeling my requests through the server A. Recently, I lost that machine and configuration and now I tried to set it up again in the same manner. However, I cant seem to remember exactly how I made it work. I keep getting Connection Refused (111) on other machines. My guess is that my squid server isnt able to forward requests from other machines to the actual squid server. I could use any help for debugging this problem. I don't want to use alternatives such as ssh tunneling. This solution has worked for me in the past, I just don't remember how to set it up the same way again.

  Read the article

• Outlook locking network connection/session?

  - by HaydnWVN

  Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

  Read the article

• Creating "save as" functionality to .eml file in AppleScript

  - by unieater

  I'm new to AppleScript and trying to figure out how to save a Mail.app message as an .eml message. Ideally, I would like it to act similar to the Mail menu bar actions, in which it saves the message and the attachments together. The workflow is that you have a selection in Mail, hit a hotkey and the function creates a filename (newFile) for the email to be saved. I just need help with how to save the message to the path (theFolder) in an .eml format. tell application "Mail" set msgs to selection if length of msgs is not 0 then display dialog "Export selected message(s)?" if the button returned of the result is "OK" then set theFolder to choose folder with prompt "Save Exported Messages to..." without invisibles repeat with msg in msgs -- determine date received of msg and put into YYYYMMDD format set msgDate to date received of msg -- parse date SEMversion below using proc pad2() set {year:y, month:m, day:d, hours:h, minutes:min} to (msgDate) set msgDate to ("" & y & my pad2(m as integer) & my pad2(d)) -- assign subject of msg set msgSubject to (subject of msg) -- create filename.eml to be use as title saved set newFile to (msgDate & "_" & msgSubject & ".eml") as Unicode text -- copy mail message to the folder and prepend date-time to file name -- THIS IS WEHRE I AM COMPLETE LOST HOW SAVE THE EMAIL into theFolder end repeat beep 2 display dialog "Done exporting " & length of msgs & " messages." end if -- OK to export msgs end if -- msgs > 0 end tell on pad2(n) return text -2 thru -1 of ("00" & n) end pad2

  Read the article

• Intermittent FTP login issues (Microsoft IIS FTP Service)

  - by JaggenSWE

  I've got a somewhat weird problem which I'm not sure how to troubleshoot. We have a FTP running on a Windows Server 2003 machine using the IIS FTP Service, this is for our clients and is configured with IP-restrictions. However, now ONE of the clients starts complaining that they can't log in to the server from time to time. This is just ONE of 10+ clients that have this issue, which makes me think it's a problem on their side. Just to be on the safe side I had a peek into the FTP logs and found something strange. Whenever succeed in loggin in this is what I can find in the logs: nnn.nnn.nnn.70, userxxx, 2012-06-11, 09:22:32, MSFTPSVC1, SERVERNAME, nnn.nn.nn.11, 0, 0, 0, 331, 0, [191747]USER, userxxx, -, nnn.nnn.nnn.70, userxxx, 2012-06-11, 09:22:32, MSFTPSVC1, SERVERNAME, nnn.nn.nn.11, 0, 0, 0, 230, 0, [191747]PASS, -, -, However, if the login fails I see the following events: nnn.nnn.nnn.70, userxxx, 2012-06-11, 09:16:33, MSFTPSVC1, SERVERNAME, nnn.nn.nn.11, 0, 0, 0, 331, 0, [191739]USER, userxxx, -, nnn.nnn.nnn.70, -, 2012-06-11, 09:16:33, MSFTPSVC1, SERVERNAME, nnn.nn.nn.11, 0, 0, 0, 530, 1326, [191739]PASS, -, -, When you look at the event where the clients sends the PASS in the successful login it seems to know that it is infact "userxxx" that is coupled to that PASS, but when it fails it seems to be lost since user in the PASS event is set to "-". Anyone have any ideas around this, any help would be appreciated. :) //JaggenSWE

  Read the article

• MS Dynamics CRM users disappear

  - by Max Kosyakov

  Recently we came across quite a weird issue. The administrators say that once in a while they notice that user accounts in MS Dynamics CRM are lost . When a new user is added to the system, the administrators add him/her to the Active Directory first. Then, they go to Dynamics CRM interface, then to system configuration -> administration -> users and add the new user to the CRM, add roles to this user, grant them relevant permissions. Then the user is able to use a custom application, which connects to the Dynamics CRM via WCF. After a while (few weeks or months) the user is unable to use the custom application because Dynamics CRM cannot authorise this user. When administrators open the Dynamics CRM user management interface (configuration -> administration -> users ) and browse through the list of CRM users they cannot find the user in the list. When they try to add the user to Dynamics CRM back, the CRM fails with the error message "User already exists". Moreover, the user still exists in the Active Directory. The admins are very sure the user had been added to the CRM before he/she started to work. The only fact the the user was able to use the custom application normally says that the user had been indeed registered in the CRM. How come the user is not listed in the CRM user management interface at all? Have anyone faced any issues like that? Seen or heard of disappearing CRM users somewhere? Any help is appreciated. Where can one start digging?

  Read the article

• Why can't I physically access my machine after a remote session?

  - by Steve Crane

  I have a Dell Optiplex 960 desktop running Windows 7 64-bit at work. I typically leave it locked rather than logged off when I go home, so that I'm able to remote in from home and continue working if I wish. This is where the problem comes in. If I don't remote in there is no problem and I can simply unlock the next morning. It's when I do remote in that I have a problem. Remote sessions work as expected but when I get to work the next morning the machine appears to have gone into a sleep or hibernate state, from which no amount of mouse moving or keyboard pounding will wake it. The machine is not hanging as remote sessions to it are still possible; it seems that physical access from it's own mouse and keyboard are lost. The only way to gain access is to press and hold the power switch for several seconds until the machine shuts down. Of course this means Windows does not gracefully shut down and after powering up it takes several minutes for the machine to boot and reach the login prompt; presumably while it checks the disk. Has anyone else seen something like this?

  Read the article

• BIOS not detecting working SATA hard drive

  - by user28927

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• MySQL ADO.NET Connector & MSSQL Integration Services

  - by user1114330

  Here I am, day three... attempting to sync a data view on a Windows Vista box (64 bit) running MSSQL 2012 and Visual Studio 2010. Sanity is slipping and hunger for progress fills my attention. I went through hell trying to get the MySQL ODBC drivers to get the job but to no avail...everyone seems to be lost and all the threads I can find are solutions that do not work for me. The problem: System DSN's not being seen by SSIS. SSIS DSN Not Showing as ODBC Data Source I make the decision to try out the ADO.NET connector...and to my surprise it is actually in the selection list in data sources in SSIS. So I take off running to create a Data Flow Task, create an ADO.NET Source (a local MSSQL DB)...all is good as usual. Then I move swiftly to creating a ADO.NET Destination, enter my credentials...wow, I am selecting a database finally on my linux server! Happy thinking that I finally have figured a way to get the job done. Then I move to mappings...nope, something is wrong...I am getting an error that hurts my eyes: Pipeline component has returned HRESULT error code 0xC0208457 from a a method call. Error at Data Flow Task [ADO NET Destination [81]]: Failed to get properties of external columns. The table name you entered may not exist or you do not have SELECT permission on the table object and an alternative attempt to get column properties through connection has failed. Detailed error messages are" You have an error in your SQL syntax check the manual that corresponds to your MySQL server version for the right syntax to use near "database".tablename" at line 1. The descriptor files on path C:\Program Files (x86)\Microsoft SQL Server\110\DTS\ProviderDescriptors\ does not contain schema information for connection of type MySQL.Data.MySqlClient.MySqlConnection. So it looks like it can't the information and therefore I cannot map the tables properly. Any ideas on this would be ultra helpful...thanks in advance to All!

  Read the article

• Getting 0xc00000e windows 7 "Boot device inaccessible" after random crashes

  - by Dynde

  I've been having some weird random crashes that I can't seem to locate, and I'm unsure if it's windows or hardware related. It's a brand new computer and very powerful. I've run into a couple of these random crashes, now I don't know what causes them, as it happens during the night, when I'm sleeping. When I wake up, all I see is a boot manager screen that says Exception: 0xc00000e "Boot device inaccessible". A simple restart doesn't fix the problem - it seems to struggle locating my primary hdd - but a complete shutdown works, it'll just fly straight into windows again. The event viewer doesn't tell me much. The most reason incident just gives me this: "The previous system shutdown at 08:55:44 on ?11-?12-?2011 was unexpected." And also a kernel power event: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. and I can see only two application event entries around that time at 8.47 (about 8 minutes prior to the crash): The Windows Modules Installer service entered the running state. The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. Can anyone tell me anything about this, or direct me to a forum or something that might know what's wrong? I can supply the extra details of the events too if needed. The hdd is an SSD - could that have anything to do with it? I ran a few diagnostics and memory and hdd should be okay - at least the diagnostics report is clean. Is it a faulty drive?

  Read the article

• BIOS not detecting working SATA hard drive.

  - by Evan

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• I deployed Flash Player via a Software Installation policy. How to upgrade?

  - by eleven81

  I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

  Read the article

• Windows Explorer Hangs on Right-Click

  - by Bryan

  I am not sure if this is the right site to post this one as I typically post coding questions on stackoverflow. But I'll ask anyways and hopefully someone can move it if it's incorrect. Currently I have a customer built PC, utilizing an Intel i7 chip, 1300WATT PSU, 8Gigs of RAM, and two video cards. Originally I had the one video card (NVIDIA) that used the PSU and had two DVI output. After purchasing a third monitor I installed another ATI) graphics card not needed any PSU connectors. After installing and restarting, I noticed that when I right-click on my desktop, or through Windows Explorer it will hang, freeze then restarted. Sometimes after Windows Explorer restarts the problem dissipates. I checked to make sure everything was connected properly and it was. I repaired the ATI Catalyst Control Center to see if that had an issue, and I checked to see if either video card required updated drivers. Nothing worked. I tried restarting my PC and that didn't work. I tried using ShellXView (I forgot what it's actually called) and tried closed processes but that didn't work. Does anyone have any idea what could have caused this orpossible solutions I should try?< Thanks in advance.

  Read the article

• IP6 seems to be enabled - How do I configure it without interfering with IP4?

  - by Mister IT Guru

  I noticed that some of my Centos boxes have IP6 enabled, and seem to have addresses. I have no problem with this, but I would like to get a handle on it, and even connect to them using IP6. This would really help if for any reason DHCP has a hiccup. But I'm a bit lost as to where the configuration on my CentOS box is. (I am also on google researching this, but I like server fault! :) ) I am hoping that I would be able to log into this via the VPN because every now and then that DHCP device has a bad morning, and needs to be restarted. (I'm also looking into this issue, but someone else handles that, management separation gone mad!) It's a remote client, so it would be a lot easier for me to connect to these systems which seem to self configure, to use that as a pivot via ssh tunnels to get to other remote devices to continue to manage them, while out main route is fixed. I guess, my questions are How can I configure IP6 without interfering with IP4, and On CentOS, can I influence this auto configuration I seem to be seeing?

  Read the article

• Ways to recover data from external hard drive

  - by Howard Benson

  I use an external hard disk for backup of my mac with time machine (OS 10.5.8). I have made something wrong and I have found important folders in the recycler bin. These folders come from external hd. They are backup folders (backups.backupdb) and others. I have tried to restore them draggin and dropping. Some of them came back in the external hd in a while. For the others it takes hours to "preparing to copy" and then it has said "there's no space to copy" on ext hd. It's strange. Files are now in the recycle bin (180gb), and the ext had should have lot of free space. But it isn't really so. Ext hd is not free of space even if these files are in the bin. I ask for advices. I'm not also able to use time machine now (and i have "lost" old backups) for the same reason. Ext hd says that it has not free space.. Thanks

  Read the article

• KVM Guest Reboot Loop

  - by javano

  I have been pulled into a situation where a KVM server (CentOS 6.2) lost power and upon reboot one of the guests hasn't started up again (XP SP3). I have SSH'ed in and someone must have changed something relating to the hyper visors prior to the power loss, but not rebooted all the guests. This particular guest wouldn't start because it was configured to use /usr/bin/qemu-system-x86_64 which isn't there now (assuming it was before?). I changed it to use /usr/libexec/qemu-kvm as this is what all the other guests on this server seem to be using, and its booting up. Using virt-manager on my local machine I can connect to the display of the XP machine and it gets as far as this screen; http://support.gateway.com/emachines/issues/2-1131285152-01.gif The problem I face now, is that which ever option I choose the machine just reboots. So it's and endless loop. I thought that perhaps a file system error maybe present due to the unclean shutdown. There is an XP SP3 ISO mounted under the guest, which I booted from in an attempt to access the recovery tools, but I don't have the Administrator password! I am out of ideas, and it's turning out to be quite the conundrum. Should I use a 3rd party live CD to test the FS for errors? How else can I trouble shoot these restarts?

  Read the article

• Deploying a Django application in a virtual Ubuntu Server

  - by mfsaint

  I have a virtualbox machine running Ubuntu Server 10.04LTS. My intention is to this machine to work like a VPS, this way I can learn and prepare for when I get a VPS service. Apache+mod_wsgi for deploying the Django app seems the right choice to me. I have the domain (marianofalcon.com.ar) but nothing else, no DNS. The problem is that I'm pretty lost with all the deployment stuff. I know how to configure mod_wsgi(with the django.wsgi file) and apache(creating a VirtualHost). Something is missing and I don't know what it is. I think that I lack networking skills ant that's the big problem. Trying to host the app on a virtualbox adds some difficulty because I don't know well what IP to use. This is what I've got: file placed at: /etc/apache2/sites-available: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName www.my-domain.com ServerAlias my-domain.com Alias /media /path/to/my/project/media DocumentRoot /path/to/my/project WSGIScriptAlias / /path/to/your/project/apache/django.wsgi ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost> django.wsgi file: import os, sys wsgi_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.dirname(wsgi_dir) sys.path.append(project_dir) project_settings = os.path.join(project_dir,'settings') os.environ['DJANGO_SETTINGS_MODULE'] = 'myproject.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler()

  Read the article

• xauth, ssh and missing home directory

  - by flolo

  We have several servers, and normaly everything works fine, except now... we get a new aircondition installed. This takes 36 hours and for this time almost all servers got shutdown, only 2 remaining servers run for the most important tasks (i.e. accepting incoming email, delivering some important websites, login-server). Everybody was informed that when they need appropiate data from the homedirs they should fetch it before take down. Long story short: Someone realized that he have run a certain program on one of the servers. No Problem, he can remote login into our login server and run the programm there without home directory (binaries are local and necessary information can be copied to the /tmp). That works like a charm until... ... the user needs to run a GUI programm. I find no easy way to make it running, usually ssh -Y honk@loginserver is enough but now the homedirectory is missing and ssh is not able to copy the cookies into ~/.Xauthority (as the file server with the home directories is down). Paranoid as all systemadmins all X-Server just listen locally not on tcp ports, so no remote X connection possible SSH config is waterproof - i.e. no way to set environment variables. My Problem is, that the generated proxy MIT cookie from ssh get lost as the .Xauthority doesnt exist. If I could retrieve it somehow I could reenter it a .Xauthority in /tmp. The only other option (besides changing the config) which came to my mind is, makeing a tunnel (netcat, or better ssh) from the remote host to the loginserver and copy the cookie manually (not sure if it the tcp-unix domain socket stuff works as expected). Any good suggestions (for the future - now our servers are already up)?

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• Unable to connect via NetBIOS Name

  - by grom

  I can't connect to machines/shares by NetBIOS names. Below is console output showing the problem. C:\>nbtstat -n Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Local Name Table Name Type Status --------------------------------------------- BEAST <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BEAST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <1D> UNIQUE Registered ..__MSBROWSE__.<01> GROUP Registered C:\>nbtstat -A 192.168.1.3 Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- BRCLAPTOP <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BRCLAPTOP <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered MAC Address = 00-1C-BF-14-B8-6E C:\>ping beast Pinging beast [fe80::59b8:179f:b90b:a63f%11] with 32 bytes of data: Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Ping statistics for fe80::59b8:179f:b90b:a63f%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping brclaptop Ping request could not find host brclaptop. Please check the name and try again. C:\>nbtstat -a brclaptop Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] Host not found.

  Read the article

• Can start-stop-daemon use environmental variables?

  - by scottburton11

  I need to daemonize a Windows app running in Wine, and create a pid in /var/run. Since it requires an X11 session to run, I need to make sure the $DISPLAY variable is set in the running user's environment. Assuming I already have a X11 session running, with a given display, here's what the start-stop-daemon line looks like in my /etc/init.d script: start-stop-daemon --start --pidfile /var/run/wine-app.pid -m -c myuser -g mygroup -k 002 --exec /home/myuser/.wine/drive_c/Program\ Files/wine-app.exe Unfortunately, my version of start-stop-daemon on Ubuntu 8.04 doesn't have the -e option to set environmental variables. I gather that you could simply set $DISPLAY before the command, like so: VAR1="Value" start-stop-daemon ... But it doesn't work. Since I'm using the -c {user} option to run as a specific user, I'm guessing there's an environment switch and VAR1 is lost. I've tried exporting DISPLAY from the running user's .profile and/or .bashrc but it doesn't work either. Is there another way to do this? Is this even possible? Am I overlooking something? Many thanks

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >