Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 255/409 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• If I double my ram on a x86 processor, does that double the ram I can use for each individual process?

  - by Derek Reitz

  I don't understand how 32-Bit OS's use RAM on a per process basis. I've read the max RAM my x86 processor running a 32-bit OS can use is 2^32 = 4gb; but that's just for one process, right? 3DS Max keeps crashing, but it typically can never use more than 2GB of RAM before it crashes, if I increase my RAM from 4-8GB, would that double how much RAM I can use for each individual process or actually cause no change in my performance? Also would increasing my VRAM and getting a better graphics card increase the extent to which individual programs can preform? Lastly, is there any way to upgrade a 86-bit processor to be able to run a 64-bit OS? I feel like it would be ridiculous to sell modern processors that are capped at 4GB of RAM? Thanks. Quad-Core Intel i7 Q 720 @ 1.6GHz

  Read the article

• Poor TCP loopback throughput on Windows

  - by Yodan Tauber

  I measured the throughput of a locally bound TCP socket connection on my computer (Intel Q9550, 64 GB RAM, Windows XP 64 bit) using iperf. I got dissatisfying results (around 1.6 Gbit/s) each time, no matter how I tweaked the TCP settings (buffer length, window size, max segment size, no delay). I got similar results when I tried netperf. Now, I understand (from sources like these) that the average throughput of a loopback connection should be around 5 Gbit/s. What could be the reasons for such poor performance?

  Read the article

• Cannot assign multi-line values to CustomAttributes with Set-Mailbox

  - by Biglig

  A colleague is implementing an application that generates signatures and publishes them to Outlook. It would be useful to him if I could store a multi-line string for each user in Active-Directory. Using one of the Custom-Attributes seems obvious, but if I try set-mailbox biglig -CustomAtribute1 "First Line``r``n Second Line" then CustomAttribute1 gets set to "FirstLineSecondLine" and looses the breaks. However, the same syntax works fine when I set e.g. StreetAddress or Notes. Of course, those are changed with set-user rather than set-mailbox. According to Technet's reference for set-user and set-mailbox, The CustomAttributes, StreetAddress, and Notes all take a system.string as their value. Is it just the case that some attributes accept multi-line strings and some don't? If so, can anyone suggest a workaround?

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Building my own computer

  - by There is nothing we can do

  I'm planning to build my own computer. I do not have enough cash to buy all components I need in one go. I want to ask, if I buy motherboard which is compatible with i7 processor (any) and compatible with graphic card Nvidia gtx 780, does it mean that this mother board will be compatible with processors (from intel) which will be released next year? Same for graphic cards? The point is that I'd like to avoid situation where I buy motherboard let's say now, and in couple of months there will be new graphic card/processor which will not be compatible with my mother board? Or maybe shall I start completely somewhere else?

  Read the article

• How to force Windows XP to rename a file with a special character?

  - by codeLes

  I have a song that Windows can't play because there is a question mark in the name of the file. "Where Have All the Cowboys Gone?.ogg" // as an example So I try to rename it and Windows complains whether I try it in Explorer or from command prompt. Error I get when trying to copy, rename, or move is: The Filename, directory name, or volume label syntax is incorrect Is there a Windows way to force a rename in this case? Update I'll keep an eye on this question, but after 13 answers and many attempts (aside form 3rd party solutions) it seems that Windows can't do this (or at least my windows can't, no short names). So I'm accepting the answer which was my original solution anyway of using Linux. It would be nice to see Windows handle this somehow, so don't stop just because I've accepted this answer, the question still stands!

  Read the article

• Is ceph usable with only 100Mbps bandwidth between nodes?

  - by vaab

  I haven't great hardware, but my requirements are low, I would like to start using ceph so as to abstract filesystem location and allow potential easy scaling to bigger hardware in an hypothetical future. My actual hardware meets ceph hardware requirements except the ethernet bandwidth part between the hosts. Mine is 100 Mbit/s which is much lower than the 1Gbps expected in ceph, even from the minimal requirement. Will I be able to use ceph in a very small smili-prod environnement (with limited number of clients) ? FYI: My hardware is 2 or maybe 3 hosts having each 4 core Intel, 24Go RAM, 2x2To disks but 100Mpbs between them.

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• Authenticated proxy in Windows command prompt

  - by tlvince

  My Internet access is delivered through an authenticated proxy. This is setup correctly in the "Internet Options" control panel applet and all browsing/GUI apps work fine. For cmd, proxy settings are typically set by exporting http_proxy. The applications I'm trying to use are git and Putty's pscp.exe. I've tried the following syntax to no avail: set http_proxy=http://username:[email protected]:port/ I've also experimented with Netsh.exe and ProxyCfg.exe with no luck. How does one configure an authenticated proxy in the Windows command prompt?

  Read the article

• RAID10 Without BBU, With UPS

  - by Richard

  My datacenter says that each rack has primary and backup power on each rack. I assume this means there is a UPS for each server. Therefore, do I have any need of getting a BBU for the following setup? Intel Cherry 520 SSD x 4 RAID 10 LSI-9260 with WRITEBACK CACHE ENABLED I have heard that without a BBU the data in the cache could be lost. Since my needs aren't mission-critical, I can afford to lose some data. But would the rest of the data on the HD be corrupted?

  Read the article

• BSOD doing wireless connection repair

  - by Kb

  (This should maybe be asked on Super User, but currently it is only for beta users.) We have a Dell Latitude X1 which always gets a BSOD (page fault in non page area) after repair on wireless. Wireless works as long as we do not do repair. Have tried the following with no success: Have updated BIOS to latest version and updated drivers for Intel wireless to the latest version. Any other suggestions? For now we just do not do repair and maybe that is the solution?

  Read the article

• All items in my pen drive had been renamed automatically and cannot open it

  - by pabz

  All the items (both files and folders) inside my pen drive had been renamed to some characters like :]h.¡?.A++ and when I try to open any folder Windows gives this message. The filename,directory name, or volume label syntax is incorrect I was told that it is a problem of the pen drive, not a virus. They say if I format the pendrive then I will be able to use it again normally. But I'm not sure. And I need those files. Does anybody knows a solution?

  Read the article

• Grepping through the results of apachectl -S

  - by CamelBlues

  I have a server with about 300 virtual hosts. When I want to make sure a specific httpd.conf file is loaded into the Virual Host config and the syntax is correct, I run apachectl -S. The problem is, though, I get a ton of output. I've tried apacectl -S | grep 'foo' and apachectl -S > foo.txt to try and make this data a little bit more manageable, but the output of the command is not conducive to grepping or shoving into a text file. When I try apachectl -S | grep 'foo', it simply returns the entire output of apachectl -S. When I try apachectl -S > foo.txt, foo.txt is an empty file. This may have something to do with how the server is configured, because I am able to successfully grep on my local machine. Any suggestions?

  Read the article

• How can I improve the rendering performance of this old DOS application?

  - by MicTech

  I have very old DOS Application (CadSoft Eagle - PCB Designer) and I want to work with it on my workstation with Windows 7. Then I install Windows 98 and that software into VmWare Player. But that software has serious problem with redrawing screen. It's very slow in comparison with my Intel Celeron 333MHz with Windows 98. I have same problem if I try to use DOSBox on Windows XP (same Celeron 333MHz). I also trying run this application directly on Windows XP (same Celeron 333MHz) with compatibility mod set to "Windows 98", but I get "(0Dh): General Protection Fault". Can someone give me good advice how I solve that?

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

• Issues with new graphics card and drivers

  - by Ortund

  With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

  Read the article

• Problem with Win7 connecting to Internet

  - by Lucas

  Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

  Read the article

• Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

  - by jdc0589

  There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

  Read the article

• Ultrabook graphics card for gaming

  - by Francisc

  I want to get a Windows 8 "ultrabook" that I can also use for gaming. Most seem to have Intel HD Graphics 4000 (integrated) or NVIDIA GeForce GT 620M (dedicated). From experience, are they any good? Things I enjoy playing are Call of Duty, Fifa and Skyrim for example. I'm looking for a device that will work on the next generation of those games as well, so it shouldn't just barely work on the current versions that exist now. So, would those two cards suffice? Any advice is much appreciated. Thank you.

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• ESXi onboard SATA passthrough [on hold]

  - by lodge93

  I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

  Read the article

• Ram not working in dual dynamic paging mode

  - by Robin Agrahari

  My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

  Read the article

• Can not start Apache 2.2.22 in Fedora 15

  - by Roderik

  I am trying to start Apache 2.2.22 under Fedora 15 on my local machine. After fixing some errors related to missing modules, httpd -t will just give me 'Syntax OK'. However when I try to start apache as the root user: service httpd start it still returns: Starting httpd (via systemctl): Job failed. See system logs and 'systemctl status' for details. [FAILED] When entering systemctl I don't see any extra information other than: httpd.service loaded failed failed LSB: start and stop Apache HTTP Server So I wonder where to look now to get this back up and running.

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >