Search Results

Search found 12267 results on 491 pages for 'memory'.

Page 256/491 | < Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >

• lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

  - by bpetit

  Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

  Read the article

• Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

  - by TGP1994

  Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

  Read the article

• windows 7:blue screen crash problem when pluging a USB external modem to connect to dialup internet?

  - by i-m-engineer

  i have a pc operation windows 7, i'm using a USB external modem to connect to dialup internet but once i connect the modem , window displays a blue screen which is famous in windows vista, it says something like that " dump physical memory " can anyone help me with my problem please ?

  Read the article

• I am building a computer, will these components work? [closed]

  - by david

  Case: Coolermaster HAF 912 Graphic card: Sapphire RADEON HD 6850 Optical Drive: SONY SATA DVD-ROM PSU: Corsair CX500 RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL Motherboard: MSI Z77A-G43 Processor: Intel core i3 2120 Still don't know which harddrive to use, neither if i should buy a cpu cooler fan... so if you can help me, please

  Read the article

• Does SDHC have any write error recovery ?

  - by marc

  What happen if SDHC card get write error (damaged cell / bad sector) ? Whole card is unusable (to trash, all data written to that sector now and in future will be lost) ? or rewrite sector (flash memory get corrupted when writing so maybe have any function to check if sector was written successfully) to another and mark as fault as unusable what will be seen as reduction of capacity but no data lost. I have to do some research about SD card-s on disk less machines. regards

  Read the article

• windows 7:blue screen crash problem when pluging a USB external modem to connect to dialup internet?

  - by i-m-engineer

  i have a pc operation windows 7, i'm using a USB external modem to connect to dialup internet but once i connect the modem , window displays a blue screen which is famous in windows vista, it says something like that " dump physical memory " can anyone help me with my problem please ?

  Read the article

• mac's .dll equivalent

  - by kalaracey

  Hello all-- so, a DLL is similar to a folder, but it allows for multiple programs/executables to access it at once, thus conserving memory (I think). What is Mac's equivalent of a DLL? I was looking through the Google Chrome folders inside ~/Library/Application Support, and instead of the regular Windows Default.dll there was just a folder, "Default" as a regular file, with contents, I assume, would regularly be inside the DLL. Does the Mac equivalent provide the same function?

  Read the article

• Forcibly Uninstalling Eclipse 3.5 Plugins

  - by Chris S

  How do you forcibly uninstall Eclipse 3.5 plugins without using Eclipse? I made the mistake of installing Google's Android SDK, and now when I try to check for updates via the "Check For Updates" or "Install New Software", some Android process runs, consumes all my CPU, takes up 3 gigs of memory, and crashes Eclipse. I can't even get to the uninstall dialog before Google's plugin kills everything.

  Read the article

• Does the size of monitor Matters ?

  - by Arsheep

  I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

  Read the article

• Does the size of monitor Matters ?

  - by Arsheep

  I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

  Read the article

• Laptop will boot to some usb flash drives but not others.

  - by evolvd

  Laptop: HP Compaq 6710b I can boot from usb just fine with the following usb flash drives: Cruzer micro 4GB HP 4GB The flash drive that will not boot: Flash Voyager 8GB To knock out variables I did the following: Using Hard Disk Low Level Format Tool I performed a low level format Full erase with Flash Memory Tookit In windows 7 I formated the drive to fat32 Used USB-Boot-Tester to write to the drive Also used uNetbooting with various distros to see if that would make a difference My guesses on what could be preventing the drive from booting: The laptop does not support booting to usb flash drives larger than 4GB The drive is defective in some way

  Read the article

• Does SDHC have any write (ECC) error recovery ?

  - by marc

  What happen if SDHC card get write error (damaged cell / bad sector) ? Whole card is unusable (to trash, all data written to that sector now and in future will be lost) ? or rewrite sector (flash memory get corrupted when writing so maybe have any function to check if sector was written successfully) to another and mark as fault as unusable what will be seen as reduction of capacity but no data lost. I have to do some research about SD card-s on disk less machines. regards

  Read the article

• whats the difference between GPU and framegrabber?

  - by user261002

  I am working on a project to monitor if human tissue has been fused with radio frequency during the surgery or not, therefore we are using a very fast camera (1800fps) and also laser illumination on the tissue and a framegrabber (1GB memory). I notice that, instead of a framegrabber, I'm able to use GPU as well, but I am not sure on what's the difference between them? Can any body explain what is the difference between a frame grabber and a GPU?

  Read the article

• View BSAVE/BLOAD Image File in Windows?

  - by Dave Mackey

  BSAVE files are essentially partial memory dumps from the "old" DOS days. I have some old files created using BSAVE and would like to open them with a windows image editing application...Does anyone know of such an application?

  Read the article

• Splitting a MySQL DB in two may ease server from "Too many connetions"? I don't think so

  - by Petruza

  I was requested to split a MySQL in two, it's kind of a horizontal partition, in which some rows correspond to one site, and some other correspond to another site. But they want to split it in two DBs in the same MySQL server. I'm no DB expert but I guess keeping them in the same MySQL server with the same amount of memory and processor and the same platform won't improve things. What we're trying to avoid is the "Too many connections" problem.

  Read the article

• SQL Server Full Text Search resource consumption

  - by Sam Saffron

  When SQL Server builds a fulltext index computer resources are consumed (IO/Memory/CPU) Similarly when you perform full text searches, resources are consumed. How can I get a gauge over a 24 hour period of the exact amount of CPU and IO(reads/writes) that fulltext is responsible for, in relation to global SQL Server resource usage. Are there any perfmon counters, DMVs or profiler traces I can use to help answer this question?

  Read the article

• Can only bring up one of two interfaces

  - by mstaessen

  I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

  Read the article

• Is there a system monitoring tool that lets me write complex queries against the data?

  - by benhsu

  I am looking for a system stat collection tool that will let me write queries against the data collected. I am planning to answer questions like: what is the average load, over the last 30 days, on this machine between 9AM and 5PM, as opposed to at night what was the average disk io on these 10 machines yesterday what was the average daytime memory usage on these 10 machines last week, as opposed to 2 weeks ago Has anyone done this with, say, collectd or graphite?

  Read the article

• Total RAM % from perfmon Windows Server 2008 R2

  - by Xaxum

  I am trying to find a good way to get available RAM percentage from perfmon. I can get Available Mbytes but I can't find any way to get the total installed memory on the server or what is in use via perfmon. I can obviously alert on GB but each of my servers have different total RAM so not a great alert. The way I understand % Committed Bytes is this includes page files on disk so this is not a good indicator. Any help would be appreciated.

  Read the article

• Windows 2003 Domain controller

  - by user40766

  I have a win 2K3 domain controller that has sudddenly started logging about 60 events a second. All events are ID 538, 540 and 576 All events pertain to Security Audit of the machine itself logging in successfully. a typical entry is Event Id 540 Successful Network Logon: User Name: <machinename>$ Any pointers to how I can diagnose this? CPU and memory are normal on the machine.

  Read the article

• POC of take screenshot from XP virtual machine of windows 7 main machine.

  - by Svisstack

  Hello, I searching any ideas of take screenshot of main machine on windows 7 from virtual machine on windows XP, have any ideas or proof on concept to can do this? Maybe from integration drivers or something? I don't require any code snipets, must have only POC of can't do this. EDIT: Can be process integration idea? (dump any process memory on main machine from virtualized)

  Read the article

• Prefork or Worker MPM for amazon xlarge server?

  - by Netismine

  I'm trying to measure would it be better to have prefork or worker mpm apache module for the server I'm working on, which is Amazon X-Large 15 GB memory 8 EC2 Compute Units (4 virtual cores with 2 EC2 Compute Units each) and that will run a Magento website with about 50 active users at once. Site serves a lot of images and about 45 requests per page. Images sometimes hang, so it seems worker would be a better option? Thanks

  Read the article

• What is a good lightweight webradio program

  - by Robert Vukovic

  I am currently using Screamer Radio but it is a little bit buggy. It freezes a lot if internet connection is bad and can not continue if there are interruptions in the internet connection. I am not interested in some full sized MP3/media player, just a simple (with low memory footprint) application that can play streaming internet radio stations.

  Read the article

• CRC error when extracting to SSD from 2nd HDD

  - by gbn

  Hello I have a large RAR file (split up) containing an ISO on my 2nd HDD When I extract it: to the same HDD, it's OK to the system/OS SSD, I get CRC errors I've checked memory, run memtests, checked wires etc I have no other issues; only with this one RAR file Any ideas please?

  Read the article

• MS SQL server: Single or multiple instances?

  - by Hugo Riley

  How costly (CPU or memory wise) is it to have multiple instances of SQL server 2005 instead of only one instance with prefixed databases? A company have three application providers. They each will install one application and they each require two or three databases. Should they all use the same instance or should every provider use it's own named instance? Is there any strong reason for one or other setup?

  Read the article

< Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >