Search Results

Search found 7651 results on 307 pages for 'execution plan'.

Page 259/307 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• Is there a recommended way to communicate scientific/engineering programming to C developers?

  - by ggkmath

  Hi, I have a lot of MATLAB code that needs to get ported to C (execution speed is critical for this work) as part of a back-end process for a web application. When I attempt to outsource this code to a C developer, I assume (correct me if I'm wrong) few C developers also understand MATLAB code (things like indexing and memory management are different, etc.). I wonder if there are any C developers out there that can recommend a procedure for me to follow to best communicate what the code does? For example, should I provide the MATLAB code and explain what it's doing line by line? Or, should I just provide the math/algorithm, explain it in plain English, and let the C developer implement it with this understanding in his/her own way (e.g. can I assume the developer understands how to work with complex math (i.e. imaginary numbers), how to generate histograms, perform an FFT, etc.)? Or, is there a better method? I expect I'm not the first to need to do this, so I wonder if any C developers out there ran into this situation and can share any conventional wisdom how they'd like this task to be transferred? Thanks in advance for any comments.

  Read the article

• Convert a image to a monochrome byte array

  - by Scott Chamberlain

  I am writing a library to interface C# with the EPL2 printer language. One feature I would like to try to implement is printing images, the specification doc says p1 = Width of graphic Width of graphic in bytes. Eight (8) dots = one (1) byte of data. p2 = Length of graphic Length of graphic in dots (or print lines) Data = Raw binary data without graphic file formatting. Data must be in bytes. Multiply the width in bytes (p1) by the number of print lines (p2) for the total amount of graphic data. The printer automatically calculates the exact size of the data block based upon this formula. I plan on my source image being a 1 bit per pixel bmp file, already scaled to size. I just don't know how to get it from that format in to a byte[] for me to send off to the printer. I tried ImageConverter.ConvertTo(Object, Type) it succeeds but the array it outputs is not the correct size and the documentation is very lacking on how the output is formatted. My current test code. Bitmap i = (Bitmap)Bitmap.FromFile("test.bmp"); ImageConverter ic = new ImageConverter(); byte[] b = (byte[])ic.ConvertTo(i, typeof(byte[])); Any help is greatly appreciated even if it is in a totally different direction.

  Read the article

• My C# UploadFile method successfully uploads a file, but then my UI hangs...

  - by kyrathaba

  I have a simple WinForms test application in C#. Using the following method, I'm able to upload a file when I invoke the method from my button's Click event handler. The only problem is: my Windows Form "freezes". I can't close it using the Close button. I have to end execution from within the IDE (Visual C# 2010 Express edition). Here are the two methods: public void UploadFile(string FullPathFilename) { string filename = Path.GetFileName(FullPathFilename); try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(_remoteHost + filename); request.Method = WebRequestMethods.Ftp.UploadFile; request.Credentials = new NetworkCredential(_remoteUser, _remotePass); StreamReader sourceStream = new StreamReader(FullPathFilename); byte[] fileContents = Encoding.UTF8.GetBytes(sourceStream.ReadToEnd()); request.ContentLength = fileContents.Length; Stream requestStream = request.GetRequestStream(); requestStream.Write(fileContents, 0, fileContents.Length); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); response.Close(); requestStream.Close(); sourceStream.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message, "Upload error"); } finally { } } which gets called here: private void btnUploadTxtFile_Click(object sender, EventArgs e) { string username = "my_username"; string password = "my_password"; string host = "ftp://mywebsite.com"; try { clsFTPclient client = new clsFTPclient(host + "/httpdocs/non_church/", username, password); client.UploadFile(Path.GetDirectoryName(Application.ExecutablePath) + "\\myTextFile.txt"); } catch (Exception ex) { MessageBox.Show(ex.Message, "Upload problem"); } }

  Read the article

• Snapshot agent obliterates conflicts

  - by mwolfe02

  We are using merge replication in SQL Server 2000. We have a snapshot agent that runs every night that updates the publication snapshot. About six months ago we updated from SQL Server 7.0 to 2000 (that's not a typo). We noticed a sharp decline in conflicts at that time but could not track down the reason. We finally found that the daily snapshot agent is recreating the conflict tables every night. This seems to be a change in functionality from SQL Server 7.0. We were running the snapshot agent before and the conflicts would accumulate. Is there some way to prevent the data in the conflict tables from being lost when the snapshot runs? Can anyone confirm a change in behavior between 7.0 and 2000? Our current plan is to simply stop automatically updating the publication snapshot. Is that a reasonable workaround? Here is the line from the script that is adding the snapshot: exec sp_addpublication_snapshot @publication = N'MyPub' , @frequency_type = 4 , @frequency_interval = 1 , @frequency_relative_interval = 1 , @frequency_recurrence_factor = 0 , @frequency_subday = 1 , @frequency_subday_interval = 5 , @active_start_date = 0 , @active_end_date = 0 , @active_start_time_of_day = 500 , @active_end_time_of_day = 235959 Here is the step that runs in the agent job: Step Name: Run agent. Type: Replication Snapshot Command: -Publisher [WCDBS02] -PublisherDB [TaxDB] -Distributor [WCDBS02] -Publication [TaxDB] -ReplicationType 2 -DistributorSecurityMode 1 This appears to be running the Replication Snapshot Agent Utility. There is no mention on that link about dropping and recreating system conflict tables, nor is there any flag that can be set to alter this behavior.

  Read the article

• Loop to check all 14 days in the pay period

  - by Rachel Ann Arndt

  Name: Calc_Anniversary Input: Pay_Date, Hire_Date, Termination_Date Output: "Y" if is the anniversary of the employee's Hire_Date, "N" if it is not, and "T" if he has been terminated before his anniversary. Description: Create local variables to hold the month and day of the employee's Date_of_Hire, Termination_Date, and of the processing date using the TO_CHAR function. First check to see if he was terminated before his anniversary. The anniversary could be on any day during the pay period, so there will be a loop to check all 14 days in the pay period to see if one was his anniversary. CREATE OR replace FUNCTION Calc_anniversary( incoming_anniversary_date IN VARCHAR2) RETURN BOOLEAN IS hiredate VARCHAR2(20); terminationdate VARCHAR(20); employeeid VARCHAR2(38); paydate NUMBER := 0; BEGIN SELECT Count(arndt_raw_time_sheet_data.pay_date) INTO paydate FROM arndt_raw_time_sheet_data WHERE paydate = incoming_anniversary_date; WHILE paydate <= 14 LOOP SELECT To_char(employee_id, '999'), To_char(hire_date, 'DD-MON'), To_char(termination_date, 'DD-MON') INTO employeeid, hiredate, terminationdate FROM employees, time_sheet WHERE employees.employee_id = time_sheet.employee_id AND paydate = pay_date; IF terminationdate > hiredate THEN RETURN 'T'; ELSE IF To_char(SYSDATE, 'DD-MON') = To_char(hiredate, 'DD-MON')THEN RETURN 'Y'; ELSE RETURN 'N'; END IF; END IF; paydate := paydate + 1; END LOOP; END; Tables I am using CREATE TABLE Employees ( EMPLOYEE_ID INTEGER, FIRST_NAME VARCHAR2(15), LAST_NAME VARCHAR2(25), ADDRESS_LINE_ONE VARCHAR2(35), ADDRESS_LINE_TWO VARCHAR2(35), CITY VARCHAR2(28), STATE CHAR(2), ZIP_CODE CHAR(10), COUNTY VARCHAR2(10), EMAIL VARCHAR2(16), PHONE_NUMBER VARCHAR2(12), SOCIAL_SECURITY_NUMBER VARCHAR2(11), HIRE_DATE DATE, TERMINATION_DATE DATE, DATE_OF_BIRTH DATE, SPOUSE_ID INTEGER, MARITAL_STATUS CHAR(1), ALLOWANCES INTEGER, PERSONAL_TIME_OFF FLOAT, CONSTRAINT pk_employee_id PRIMARY KEY (EMPLOYEE_ID), CONSTRAINT fk_spouse_id FOREIGN KEY (SPOUSE_ID) REFERENCES EMPLOYEES (EMPLOYEE_ID)) / CREATE TABLE Arndt_Raw_Time_Sheet_data ( EMPLOYEE_ID INTEGER, PAY_DATE DATE, HOURS_WORKED FLOAT, SALES_AMOUNT FLOAT, CONSTRAINT pk_employee_id_pay_date_time PRIMARY KEY (EMPLOYEE_ID, PAY_DATE), CONSTRAINT fk_employee_id_time FOREIGN KEY (EMPLOYEE_ID) REFERENCES EMPLOYEES (EMployee_ID)); error FUNCTION Calc_Anniversary compiled Warning: execution completed with warning

  Read the article

• LINQ to Entites - Left Outer Join - SQL 2000

  - by user255234

  Hi! I'm using Linq to Entities. I have the following query in my code, it includes left outer Join: var surgeonList = (from item in context.T1_STM_Surgeon.Include("T1_STM_SurgeonTitle") .Include("OTER").Include("OSLP") join reptable in context.OSLP on item.Rep equals reptable.SlpCode into surgRepresentative where item.ID == surgeonId select new { ID = item.ID, First = item.First, Last = item.Last, Rep = (surgRepresentative.FirstOrDefault() != null) ? surgRepresentative.FirstOrDefault().SlpName : "N/A", Reg = item.OTER.descript, PrimClinic = item.T1_STM_ClinicalCenter.Name, Titles = item.T1_STM_SurgeonTitle, Phone = item.Phone, Email = item.Email, Address1 = item.Address1, Address2 = item.Address2, City = item.City, State = item.State, Zip = item.Zip, Comments = item.Comments, Active = item.Active, DateEntered = item.DateEntered }) .ToList(); My DEV server has SQL 2008, so the code works just fine. When I moved this code to client's production server - they use SQL 2000, I started getting "Incorrect syntax near '(' ". I've tried changing the ProviderManifestToken to 2000 in my .edmx file, then I started getting "The execution of this query requires the APPLY operator, which is not supported in versions of SQL Server earlier than SQL Server 2005." I tied changing the token to 2005, the "Incorrect syntax near '(' " is back. Can anybody help me to find a workaround for this? Thank you very much in advance!

  Read the article

• Import CSV to class structure as the user defines

  - by Assimilater

  I have a contact manager program and I would like to offer the feature to import csv files. The problem is that different data sources order the fields in different ways. I thought of programming an interface for the user to tell it the field order and how to handle exceptions. Here is an example line in one of many possible field orders: "ID#","Name","Rank","Address1","Address2","City","State","Country","Zip","Phone#","Email","Join Date","Sponsor ID","Sponsor Name" "Z1234","Call, Anson","STU","1234 E. 6578 S.","","Somecity","TX","United States","012345","000-000-0000","[email protected]","5/24/2010","z12343","Quantum Independence" Notice that in one data field "Name" there is a comma to separate last name and first name and in another there is not. My plan is to have a line for each field (ie ID, Name, City etc.) and a statement "import to" and list box with options like: Don't Import, BusinessJoin Date, First Name, Zip and the program recognizes those as properties of an object... I'd also like the user to be able to record preset field orders so they can re-use them for csv files from the same download source. Then I also need it to check if a record all ready exists (is there a record for Anson Call all ready?) and allow the user to tell it what to do if there is a record (ie mailing address may have changes, so if that field is filled overwrite it, or this mailing address is invalid, leave the current data untouched for this person, overwrite the rest). While I'm capable of coding this...i'm not very excited about it and I'm wondering if there's a tool or set of tools out there to all ready perform most of this functionality... I hope this makes sense...

  Read the article

• Crash using WscRegisterForChanges.

  - by user335126

  I'm trying to use the WscRegisterForChanges with C++ function in Windows 7. Documentation located here: http://msdn.microsoft.com/en-us/library/bb432507(v=VS.85).aspx My problem is that even though the callback properly executes, the code crashes when it gets to the end of the callback's execution. Here's the code in question. It's very simple, so I'm not sure why it's crashing: #include #include #include void SecurityCenterChangeOccurred(void *param) { printf("Change occurred!\n"); } int main() { HRESULT result = S_OK; HANDLE callbackRegistration = NULL; result = WscRegisterForChanges( NULL, &callbackRegistration, (LPTHREAD_START_ROUTINE)SecurityCenterChangeOccurred, NULL); while(1) { Sleep(100); } return 0; } My call stack looks like this when the crash occurs: 00faf6e8() ntdll.dll!_TppWorkerThread@4() + 0x1293 bytes kernel32.dll!@BaseThreadInitThunk@12() + 0x12 bytes ntdll.dll!___RtlUserThreadStart@8() + 0x27 bytes ntdll.dll!__RtlUserThreadStart@8() + 0x1b bytes If I add ExitThread(0); to the end of SecurityCenterChangeOccurred, I get an error and the following trace (So I don't think I should be using ExitThread): Unhandled exception at 0x7799852b (ntdll.dll) in WscRegisterForChangesCrash.exe: 0xC000071C: An invalid thread, handle %p, is specified for this operation. Possibly, a threadpool worker thread was specified. ntdll.dll!_TpCheckTerminateWorker@4() + 0x3ca2f bytes ntdll.dll!_RtlExitUserThread@4() + 0x30 bytes WscRegisterForChangesCrash.exe!SecurityCenterChangeOccurred(void * param=0x00000000) Line 8 + 0xa bytes C++ wscapi.dll!WorkItemWrapper() + 0x19 bytes ntdll.dll!_RtlpTpWorkCallback@8() + 0xdf bytes ntdll.dll!_TppWorkerThread@4() + 0x1293 bytes kernel32.dll!@BaseThreadInitThunk@12() + 0x12 bytes ntdll.dll!___RtlUserThreadStart@8() + 0x27 bytes ntdll.dll!__RtlUserThreadStart@8() + 0x1b bytes Does anyone have any ideas why this might be happening? To trigger the crash run the program and turn the firewall on or off.

  Read the article

• Designing a chain of states

  - by devoured elysium

  I want to model a kind of FSM(Finite State Machine). I have a sequence of states (let's say, from StateA to StateZ). This sequence is called a Chain and is implemented internally as a List. I will add states by the order I want them to run. My purpose is to be able to make a sequence of actions in my computer (for example, mouse clicks). (I know this has been done a zillion times). So a state is defined as a: boolean Precondition() <- Checks to see if for this state, some condition is true. For example, if I want to click in the Record button of a program, in this method I would check if the program's process is running or not. If it is, go to the next state in the chain list, otherwise, go to what was defined as the fail state (generally is the first state of them all). IState GetNextState() <- Returns the next state to evaluate. If Precondition() was sucessful, it should yield the next state in the chain otherwise it should yield the fail state. Run() Simply checks the Precondition() and sets the internal data so GetNextState() works as expected. So, a naive approach to this would be something like this: Chain chain = new Chain(); //chain.AddState(new State(Precondition, FailState, NextState) <- Method structure chain.AddState(new State(new WinampIsOpenCondition(), null, new <problem here, I want to referr to a state that still wasn't defined!>); The big problem is that I want to make a reference to a State that at this point still wasn't defined. I could circumvent the problem by using strings when refrering to states and using an internal hashtable, but isn't there a clearer alternative? I could just pass only the pre-condition and failure states in the constructor, having the chain just before execution put in each state the correct next state in a public property but that seems kind of awkward.

  Read the article

• Running Cargo From Maven antrun Plugin

  - by Frank

  I have a maven (multi-module) project creating some WAR and EAR files for JBoss AS 7.1.x. For one purpose, I need to deploy one generated EAR file of one module to a fresh JBoss instance and run it, call some REST web service calls against it and stop JBoss. Then I need to package the results of these calls that were written to the database. Currently, I am trying to use CARGO and the maven ant run plugin to perform this task. Unfortunately, I cannot get the three (maven, ant run and CARGO) to play together. I don't have the uberjar that is used in the ant examples of cargo. How can I configure the ant run task so that the cargo ant task can create, start, deploy my JBoss? Ideally the one unpacked and configured by the cargo-maven2-plugin in another phase? Or, is there a better way to achieve my goal of creating the database? I cannot really use the integration-test phase, as it is executed after the package phase. So, I plan to do it all in compile phase using antrun.

  Read the article

• trouble connecting to MySql DB (PHP)

  - by user332817

  Hi I have the following PHP code to connect to my db. <?php ob_start(); $host="localhost"; // Host name $username="root"; // Mysql username $password=""; // Mysql password $db_name="test"; // Database name $tbl_name="members"; // Table name // Connect to server and select databse. mysql_connect("$host", "$username", "$password")or die("cannot connect"); ?> however I get the following error: Warning: mysql_connect() [function.mysql-connect]: [2002] A connection attempt failed because the connected party did not (trying to connect via tcp://localhost:3306) in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 Fatal error: Maximum execution time of 30 seconds exceeded in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 I am able to add a db/tables via phpmyadmin but I cant connect using php. here is a screenshot of my phpmyadmin page: http://img294.imageshack.us/img294/1589/sqls.jpg any help would be appreciated, thanks in advance.

  Read the article

• sql server - framework 4 - IIS 7 weird sort from db to page

  - by ila

  I am experiencing a strange behavior when reading a resultset from database in a calling method. The sort of the rows is different from what the database should return. My farm: - database server: sql server 2008 on a WinServer 2008 64 bit - web server: a couple of load balanced WinServer 2008 64 bit running IIS 7 The application runs on a v4.0 app pool, set to enable 32bit applications Here's a description of the problem: - a stored procedure is called, that returns a resultset sorted on a particular column - I can see thru profiler the call to the SP, if I run the statement I see correct sorting - the calling page gets the results, and before any further elaboration logs the rows immediately after the SP execution - the results are in a completely different order (I cannot even understand if they are sorted in any way) Some details on the Stored Procedure: - it is called by code using a SqlDatAdapter - it has also an output value (a count of the rows) that is read correctly - which sort field is to be used is passed as a parameter - makes use of temp tables to collect data and perform the desired sort Any idea on what I could check? Same code and same database work correctly in a test environment, 32 bit and not load balanced.

  Read the article

• IPad SQLite Push and Pull Data from external MS SQL Server DB

  - by MattyD

  This carries on from my previous post (http://stackoverflow.com/questions/4182664/ipad-app-pull-and-push-relational-data). My plan is that when the ipad application starts I am going to pull data (config data i.e. Departments, Types etc etc relational data that is used across the system) from a webhosted MS SQL Server DB via a webservice and populate it into an SQL Lite DB on the IPad. Then when I load a listing I will pull the data over the line again via a webservice and populate it into the SQL Lite db on the ipad (than just run select commands to populate the listing). My questions are: 1. What is the most efficient way to transfer data across the line via the web? Everyone seems to do it a different way. My idea is that I will have a webService for each type of data pull (e.g. RetrieveContactListing) that will query the db and than convert that data into "something" to send across the line. My question really is what is the "something" that it should be converting into? 2. Everyone talks about odata services. Is this suited for applications where complex read and writes are needed? Ive created a simple iphone app before that talked to an sql server db (i just sent my own structured xml across the line) but now with this app the data calls are going to be a lot larger so efficiency is key.

  Read the article

• Is there a way to detect Layout or Display changes in WPF?

  Hello! I am trying to check how fast the Frame control can display a FixedPage object when it is assigned to Frame.Content property. I plan to check the tick count before and after the assignment to the Content property. Example: int starttime = Environment.TickCount; frame1.Content = fixedpage; int endtime = Environment.TickCount; The problem is that the assignment to the Content property might be asynchronous and returns immediately therefore i get a zero amount of time. The rendering of the FixedPage however visually has a lag time from assignment of the Content property up to the point where the FixedPage appears on screen. The Frame.ContentChanged() event is no good either because it gets triggered even before the FixedPage appears on screen so it's not accurate. I'm thinking of detecting the change on the window or control's display instead in order to get the time when the FixedPage is actually displayed on screen. Is there a way to do this in WPF? Thanks!

  Read the article

• Zend Framework Application: module dependencies

  - by takeshin

  How do you handle dependencies between modules in Zend Framework to create reusable, drop-in modules? E.g. I have Newsletter module, which allows users to subscribe, providing e-mail address. Next, I plan to add Blog module, which allows to subscribe to posts by e-mail (it obviously duplicates some functionality of the newsletter, but the e-mails addresses are stored in User model). Next one is the Forum module, with the same subscribe to post functionality. But I want to have ability to use these modules independent to each one, i.e. application with newsletter alone, newsletter with blog, comibnation two or three modules at once. This is pretty common, e.g. the same story with search feature. I want to have search module, with options to search in all data, blog data or forum data if available. Is there any design pattern for this? Do I have to add some moduleExists($moduleMame), or provide some interface or abstract classes, some base controller pattern, similar for each module?

  Read the article

• Python finding substring between certain characters using regex and replace()

  - by jCuga

  Suppose I have a string with lots of random stuff in it like the following: strJunk ="asdf2adsf29Value=five&lakl23ljk43asdldl" And I'm interested in obtaining the substring sitting between 'Value=' and '&', which in this example would be 'five'. I can use a regex like the following: match = re.search(r'Value=?([^&>]+)', strJunk) >>> print match.group(0) Value=five >>> print match.group(1) five How come match.group(0) is the whole thing 'Value=five' and group(1) is just 'five'? And is there a way for me to just get 'five' as the only result? (This question stems from me only having a tenuous grasp of regex) I am also going to have to make a substitution in this string such such as the following: val1 = match.group(1) strJunk.replace(val1, "six", 1) Which yields: 'asdf2adsf29Value=six&lakl23ljk43asdldl' Considering that I plan on performing the above two tasks (finding the string between 'Value=' and '&', as well as replacing that value) over and over, I was wondering if there are any other more efficient ways of looking for the substring and replacing it in the original string. I'm fine sticking with what I've got but I just want to make sure that I'm not taking up more time than I have to be if better methods are out there.

  Read the article

• reporting tool/viewer for large datasets

  - by FrustratedWithFormsDesigner

  I have a data processing system that generates very large reports on the data it processes. By "large" I mean that a "small" execution of this system produces about 30 MB of reporting data when dumped into a CSV file and a large dataset is about 130-150 MB (I'm sure someone out there has a bigger idea of "large" but that's not the point... ;) Excel has the ideal interface for the report consumers in the form of its Data Lists: users can filter and segment the data on-the-fly to see the specific details that they are interested in - they can also add notes and markup to the reports, create charts, graphs, etc... They know how to do all this and it's much easier to let them do it if we just give them the data. Excel was great for the small test datasets, but it cannot handle these large ones. Does anyone know of a tool that can provide a similar interface as Excel data lists, but that can handle much larger files? The next tool I tried was MS Access, and found that the Access file bloats hugely (30 MB input file leads to about 70 MB Access file, and when I open the file, run a report and close it the file's at 120-150 MB!), the import process is slow and very manual (currently, the CSV files are created by the same plsql script that runs the main process so there's next to no intervention on my part). I also tried an Access database with linked tables to the database tables that store the report data and that was many times slower (for some reason, sqlplus could query and generate the report file in a minute or soe while Access would take anywhere from 2-5 minutes for the same data) (If it helps, the data processing system is written in PL/SQL and runs on Oracle 10g.)

  Read the article

• Android Signal 11 (SIGSEGV)

  - by Naturjoghurt

  I read many posts here and on other sites, but can not find the problem creating my Error: I use an AsyncTask because I want to easily manipulate the UI Thread before and after Execution. In doInBackground I create a ThreadPoolExecutor and execute Runnables. If I only execute 1 Runnable with the Executor, there is no Problem, but if I execute another Runnable I get following Error: 06-26 18:00:42.288: A/libc(25073): Fatal signal 11 (SIGSEGV) at 0x7f486162 (code=1), thread 25106 (pool-1-thread-2) 06-26 18:00:42.304: D/dalvikvm(25073): GC_CONCURRENT freed 119K, 2% free 8908K/9056K, paused 4ms+4ms, total 45ms 06-26 18:00:42.327: I/System.out(25073): In Check All with Prefix: a and Length: 4 06-26 18:00:42.390: I/DEBUG(126): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 06-26 18:00:42.390: I/DEBUG(126): Build fingerprint: 'google/yakju/maguro:4.2.2/JDQ39/573038:user/release-keys' 06-26 18:00:42.390: I/DEBUG(126): Revision: '9' 06-26 18:00:42.390: I/DEBUG(126): pid: 25073, tid: 25106, name: pool-1-thread-2 >>> de.uni_duesseldorf.cn.distributed_computing2 <<< 06-26 18:00:42.390: I/DEBUG(126): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 7f486162 ... 06-26 18:00:42.538: I/DEBUG(126): memory map around fault addr 7f486162: 06-26 18:00:42.538: I/DEBUG(126): 60292000-60391000 06-26 18:00:42.538: I/DEBUG(126): (no map for address) 06-26 18:00:42.538: I/DEBUG(126): bed14000-bed35000 [stack] I set up the ThreadPoolExecutor like this: // numberOfPackages: Number of Runnables to be executed public void initializeThreadPoolExecutor (int numberOfPackages) { int corePoolSize = Runtime.getRuntime().availableProcessors(); int maxPoolSize = numberOfPackages; long keepAliveTime = 60; final BlockingQueue workingQueue = new LinkedBlockingQueue(); executor = new ThreadPoolExecutor(corePoolSize, maxPoolSize, keepAliveTime, TimeUnit.SECONDS, workingQueue); } I have no clue, why it fails when starting the second Thread. Maybe Memory Leaks? Any Help appreciated. Thanks in Advance

  Read the article

• C/C++ I18N mbstowcs question

  - by bogertron

  I am working on internationalizing the input for a C/C++ application. I have currently hit an issue with converting from a multi-byte string to wide character string. The code needs to be cross platform compatible, so I am using mbstowcs and wcstombs as much as possible. I am currently working on a WIN32 machine and I have set the locale to a non-english locale (Japanese). When I attempt to convert a multibyte character string, I seem to be having some conversion issues. Here is an example of the code: int main(int argc, char** argv) { wchar_t *wcsVal = NULL; char *mbsVal = NULL; /* Get the current code page, in my case 932, runs only on windows */ TCHAR szCodePage[10]; int cch= GetLocaleInfo( GetSystemDefaultLCID(), LOCALE_IDEFAULTANSICODEPAGE, szCodePage, sizeof(szCodePage)); /* verify locale is set */ if (setlocale(LC_CTYPE, "") == 0) { fprintf(stderr, "Failed to set locale\n"); return 1; } mbsVal = argv[1]; /* validate multibyte string and convert to wide character */ int size = mbstowcs(NULL, mbsVal, 0); if (size == -1) { printf("Invalid multibyte\n"); return 1; } wcsVal = (wchar_t*) malloc(sizeof(wchar_t) * (size + 1)); if (wcsVal == NULL) { printf("memory issue \n"); return 1; } mbstowcs(wcsVal, szVal, size + 1); wprintf(L"%ls \n", wcsVal); return 0; } At the end of execution, the wide character string does not contain the converted data. I believe that there is an issue with the code page settings, because when i use MultiByteToWideChar and have the current code page sent in EX: MultiByteToWideChar( CP_ACP, 0, mbsVal, -1, wcsVal, size + 1 ); in place of the mbstowcs calls, the conversion succeeds. My question is, how do I use the generic mbstowcs call instead of teh MuliByteToWideChar call?

  Read the article

• Threads are blocked in malloc and free, virtual size

  - by Albert Wang

  Hi, I'm running a 64-bit multi-threaded program on the windows server 2003 server (X64), It run into a case that some of the threads seem to be blocked in the malloc or free function forever. The stack trace is like follows: ntdll.dll!NtWaitForSingleObject() + 0xa bytes ntdll.dll!RtlpWaitOnCriticalSection() - 0x1aa bytes ntdll.dll!RtlEnterCriticalSection() + 0xb040 bytes ntdll.dll!RtlpDebugPageHeapAllocate() + 0x2f6 bytes ntdll.dll!RtlDebugAllocateHeap() + 0x40 bytes ntdll.dll!RtlAllocateHeapSlowly() + 0x5e898 bytes ntdll.dll!RtlAllocateHeap() - 0x1711a bytes MyProg.exe!malloc(unsigned __int64 size=0) Line 168 C MyProg.exe!operator new(unsigned __int64 size=1) Line 59 + 0x5 bytes C++ ntdll.dll!NtWaitForSingleObject() ntdll.dll!RtlpWaitOnCriticalSection() ntdll.dll!RtlEnterCriticalSection() ntdll.dll!RtlpDebugPageHeapFree() ntdll.dll!RtlDebugFreeHeap() ntdll.dll!RtlFreeHeapSlowly() ntdll.dll!RtlFreeHeap() MyProg.exe!free(void * pBlock=0x000000007e8e4fe0) C BTW, the param values passed to the new operator is not correct here maybe due to optimization. Also, at the same time, I found in the process Explorer, the virtual size of this program is 10GB, but the private bytes and working set is very small (<2GB). We did have some threads using virtualalloc but in a way that commit the memory in the call, and these threads are not blocked. m_pBuf = VirtualAlloc(NULL, m_size, MEM_COMMIT, PAGE_READWRITE); ...... VirtualFree(m_pBuf, 0, MEM_RELEASE); This looks strange to me, seems a lot of virtual space is reserved but not committed, and malloc/free is blocked by lock. I'm guessing if there's any corruptions in the memory/object, so plan to turn on gflag with pageheap to troubleshoot this. Does anyone has similar experience on this before? Could you share with me so I may get more hints? Thanks a lot!

  Read the article

• Why is my code stopping and not returning an exception?

  - by BeckyLou

  I have some code that starts a couple of threads to let them execute, then uses a while loop to check for the current time passing a set timeout period, or for the correct number of results to have been processed (by checking an int on the class object) (with a Thread.Sleep() to wait between loops) Once the while loop is set to exit, it calls Abort() on the threads and should return data to the function that calls the method. When debugging and stepping through the code, I find there can be exceptions in the code running on the separate threads, and in some cases I handle these appropriately, and at other times I don't want to do anything specific. What I have been seeing is that my code goes into the while loop and the thread sleeps, then nothing is returned from my function, either data or an exception. Code execution just stops completely. Any ideas what could be happening? Code sample: System.Threading.Thread sendThread = new System.Threading.Thread(new System.Threading.ThreadStart(Send)); sendThread.Start(); System.Threading.Thread receiveThread = new System.Threading.Thread(new System.Threading.ThreadStart(Receive)); receiveThread.Start(); // timeout Int32 maxSecondsToProcess = this.searchTotalCount * timeout; DateTime timeoutTime = DateTime.Now.AddSeconds(maxSecondsToProcess); Log("Submit() Timeout time: " + timeoutTime.ToString("yyyyMMdd HHmmss")); // while we're still waiting to receive results & haven't hit the timeout, // keep the threads going while (resultInfos.Count < this.searchTotalCount && DateTime.Now < timeoutTime) { Log("Submit() Waiting..."); System.Threading.Thread.Sleep(10 * 1000); // 1 minute } Log("Submit() Aborting threads"); // <== this log doesn't show up sendThread.Abort(); receiveThread.Abort(); return new List<ResultInfo>(this.resultInfos.Values);

  Read the article

• Proper API Design for Version Independence?

  - by Justavian

  I've inherited an enormous .NET solution of about 200 projects. There are now some developers who wish to start adding their own components into our application, which will require that we begin exposing functionality via an API. The major problem with that, of course, is that the solution we've got on our hands contains such a spider web of dependencies that we have to be careful to avoid sabotaging the API every time there's a minor change somewhere in the app. We'd also like to be able to incrementally expose new functionality without destroying any previous third party apps. I have a way to solve this problem, but i'm not sure it's the ideal way - i was looking for other ideas. My plan would be to essentially have three dlls. APIServer_1_0.dll - this would be the dll with all of the dependencies. APIClient_1_0.dll - this would be the dll our developers would actual refer to. No references to any of the mess in our solution. APISupport_1_0.dll - this would contain the interfaces which would allow the client piece to dynamically load the "server" component and perform whatever functions are required. Both of the above dlls would depend upon this. It would be the only dll that the "client" piece refers to. I initially arrived at this design, because the way in which we do inter process communication between windows services is sort of similar (except that the client talks to the server via named pipes, rather than dynamically loading dlls). While i'm fairly certain i can make this work, i'm curious to know if there are better ways to accomplish the same task.

  Read the article

• Dojo: Setting a CheckBox label programmatically

  - by Mitchell Flaherty

  Let me preface by saying that I saw this other question on the subject of CheckBox labels that was asked and answered well over a year ago. I was confused by the answers and am hoping that someone can clarify or that there has been new dojo functionality introduced since then that allows me to do this without resorting to HTML. So without further ado, I would like to know how to programmatically create labels for check boxes. I have a check box like so: this.pubBoxId = new dijit.form.CheckBox({ label: "IdChannel", checked: false, channel: that.idChannel }, that.name + "_PBI"); As you can see I've tried to edit the "label" field, but the label never actually shows up on the page. I have multiple CheckBoxes that I am adding to a ContentPane and simply want a label to the left or right of the check box. Is there any way I can do this without having to write separate HTML? Also, making a separate ContentPane for each individual label would be a big pain because of how many CheckBoxes I plan to have. Thank you for reading, and let me know if further clarification is needed!

  Read the article

• How to duplicate all data in a table except for a single column that should be changed.

  - by twiga

  I have a question regarding a unified insert query against tables with different data structures (Oracle). Let me elaborate with an example: tb_customers ( id NUMBER(3), name VARCHAR2(40), archive_id NUMBER(3) ) tb_suppliers ( id NUMBER(3), name VARCHAR2(40), contact VARCHAR2(40), xxx, xxx, archive_id NUMBER(3) ) The only column that is present in all tables is [archive_id]. The plan is to create a new archive of the dataset by copying (duplicating) all records to a different database partition and incrementing the archive_id for those records accordingly. [archive_id] is always part of the primary key. My problem is with select statements to do the actual duplication of the data. Because the columns are variable, I am struggling to come up with a unified select statement that will copy the data and update the archive_id. One solution (that works), is to iterate over all the tables in a stored procedure and do a: CREATE TABLE temp as (SELECT * from ORIGINAL_TABLE); UPDATE temp SET archive_id=something; INSERT INTO temp (select * from temp); DROP TABLE temp; I do not like this solution very much as the DDL commands muck up all restore points. Does anyone else have any solution?

  Read the article

• Large scale Merge Replication strategy - what can go wrong?

  - by niidto

  Hi, I'm developing a piece of software that uses Merge Replication and SQL Compact on Windows Mobile 6. At the moment it is running on 5 devices reasonably well. The issues I've come up against are as follows: The schema has had to change a lot, and will continue to have to change as the application evolves. There have been various errors replicating these schema changes down to the device, uploads failing due to schema inconsistencies. Subscriptions expiring (after 14 days) and unable to reinitialize with upload - AKA, potential data los of unsynced data up to that point. Basically, the worst case scenario is data loss, and when merge replication fails, there seems to be no way back to get the data off. My method until now has been to drop and create the subscription on the device. I don't hear many people doing this, though it seems to solve everything. The long term plan is to role this out to 500+ devices. Any advice on people who have undertaken similar projects, and how to minimise data loss and make it so that there's appropriate error handling code to recover from sync failures would be much appreciated. James

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >