Search Results

Search found 7704 results on 309 pages for 'excel 2011'.

Page 262/309 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • PASS: The Budget Process

    - by Bill Graziano
    Every fiscal year PASS creates a detailed budget.  This helps us set priorities and communicate to our members what we’re going to do in the upcoming year.  You can review the current budget on the PASS Governance page.  That page currently requires you to login but I’m talking with HQ to see if there are any legal issues with opening that up. The Accounting Team The PASS accounting team is two people.  The Executive Vice-President of Finance (“EVP”) and the PASS Accounting Manager.  Sandy Cherry is the accounting manager and works at PASS HQ.  Sandy has been with PASS since we switched management companies in 2007.  Throughout this document when I talk about any actual work related to the budget that’s all Sandy :)  She’s the glue that gets us through this process.  Last year we went through 32 iterations of the budget before the Board approved so it’s a pretty busy time for her us – well, mostly her. Fiscal Year The PASS fiscal year runs from July 1st through June 30th the following year.  Right now we’re in fiscal year 2011.  Our 2010 Summit actually occurred in FY2011.  We switched to this schedule from a calendar year in 2006.  Our goal was to have the Summit occur early in our fiscal year.  That gives us the rest of the year to handle any significant financial impact from the Summit.  If registrations are down we can reduce spending.  If registrations are up we can decide how much to increase our reserves and how much to spend.  Keep in mind that the Summit is budgeted to generate 82% of our revenue this year.  How it performs has a significant impact on our financials.  The other benefit of this fiscal year is that it matches the Microsoft fiscal year.  We sign an annual sponsorship agreement with Microsoft and it’s very helpful that our fiscal years match. This year our budget process will probably start in earnest in March or April.  I’d like to be done in early June so we can publish before July 1st.  I was late publishing it this year and I’m trying not to repeat that. Our Budget Our actual budget is an Excel spreadsheet with 36 sheets.  We remove some of those when we publish it since they include salary information.  The budget is broken up into various portfolios or departments.  We have 20 portfolios.  They include chapters, marketing, virtual chapters, marketing, etc.  Ideally each portfolio is assigned to a Board member.  Each portfolio also typically has a staff person assigned to it.  Portfolios that aren’t assigned to a Board member are monitored by HQ and the ExecVP-Finance (me).  These are typically smaller portfolios such as deferred membership or Summit futures.  (More on those in a later post.)  All portfolios are reviewed by all Board members during the budget approval process, when interim financials are released internally and at year-end. The Process Our first step is to budget revenues.  The Board determines a target attendee number.  We have formulas based on historical performance that convert that to an overall attendee revenue number.  Other revenue projections (such as vendor sponsorships) come from different parts of the organization.  I hope to have another post with more details on how we project revenues. The next step is to budget expenses.  Board members fill out a sample spreadsheet with their budget for the year.  They can add line items and notes describing what the amounts are for.  Each Board portfolio typically has from 10 to 30 line items.  Any new initiatives they want to pursue needs to be budgeted.  The Summit operations budget is managed by HQ.  It includes the cost for food, electrical, internet, etc.  Most of these come from our estimate of attendees and our contract with the convention center.  During this process the Board can ask for more or less to be spent on various line items.  For example, if we weren’t happy with the Internet at the last Summit we can ask them to look into different options and/or increasing the budget.  HQ will also make adjustments to these numbers based on what they see at the events and the feedback we receive on the surveys. After we have all the initial estimates we start reviewing the entire budget.  It is sent out to the Board and we can see what each portfolio requested and what the overall profit and loss number is.  We usually start with too much in expenses and need to cut.  In years past the Board started haggling over these numbers as a group.  This past year they decided I should take a first cut and present them with a reasonable budget and a list of what I changed.  That worked well and I think we’ll continue to do that in the future. We go through a number of iterations on the budget.  If I remember correctly, we went through 32 iterations before we passed the budget.  At each iteration various revenue and expense numbers can change.  Keep in mind that the PASS budget has 200+ line items spread over 20 portfolios.  Many of these depend on other numbers.  For example, if we decide increase the projected attendees that cascades through our budget.  At each iteration we list what changed and the impact.  Ideally these discussions will take place at a face-to-face Board meeting.  Many of them also take place over the phone.  Board members explain any increase they are asking for while performing due diligence on other budget requests.  Eventually a budget emerges and is passed. Publishing After the budget is passed we create a version without the formulas and salaries for posting on the web site.  Sandy also creates some charts to help our members understand the budget.  The EVP writes a nice little letter describing some of the changes from last year’s budget.  You can see my letter and our budget on the PASS Governance page. And then, eight months later, we start all over again.

    Read the article

  • Blogging locally and globally–my experience

    - by DigiMortal
    In Baltic MVP Summit 2011 there was discussion about having two blogs - one for local and another for global audience – and how to publish once written information in these blogs. There are many ways how to optimize your blogging activities if you have more than one audience and here you can find my experiences, best practices and advices about this topic. My two blogs I have to working blogs: this one here technology and programming blog for local market My local blog is almost five years old and it makes it one of the oldest company blogs in Estonia. It is still active and I write there as much as I have time for it. This blog here is active since September 2007, so it is about 3.5 years old right now. Both of these blogs are  my major hits in my MVP carrier and they have very good web statistics too. My local blog My local blog is about programming, web and technology. It has way wider target audience then this blog here has. By example, in my local blog I blog also about local events, cool new concept phones, different webs providing some interesting services etc. But local guys can find there also my postings about how to solve one or another programming problem and postings about Microsoft technologies I am playing with. This far my local blog has a lot of readers for such a small country that Estonia is. This blog has made me a lot of cool contacts and I have had there a lot of interesting discussions about different technical topics. Why I started this blog? Living in small country is different than living in big country. In small country you have less people and therefore smaller audience so you have to target more than one technical topic to find enough readers. In a same time you are still interested in your main topics and you want to reach to more people who are sharing same interests with you. Practically one day y will grow out from local market and you go global. This is how this blog was born. Was it worth to create, promote and mess with it? Every second I have put on my time to this blog has been worth of it. Thanks to this blog I have found new good friends and without them I think it is more boring to work on different problems and solutions. Defining target audiences One thing you should always do when having more than one blog is defining target audiences. If you are just technomaniac interested in sharing your stuff and make some new friends and have something to write to your MVP nomination form then you don’t have to go through complex targeting process. You can do it simple way and same effectively. Here is how I defined target audiences to my blogs: local blog – reader of my local blog is IT professional, software developer, technology innovator or just some guy who is interested in technology,   this blog – reader of this blog is experienced professional software developer who works on Microsoft technologies or software developer who is open minded and open to new technologies and interesting solutions to development problems. You can see how local blog – due to small market with less people – has wider definition for audience while this blog is heavily targeted to Microsoft technologies and specially to software development. On practical side these decisions are also made well I think because it is very hard to build up popular common IT blog. On global level it is better to target some specific niche and find readers who are professionals on your favorite topics. Thanks to this blog I have found new friends who are professional developers and I am very happy about all the discussions I have had with them. Publishing content to different blogs My local blog and this blog have some overlapping topics like .NET, databases and SEO. Due to this overlapping there is question: when I write posting to my local blog then should I have to publish same thing in my global blog? And if I write something to my global blog then should I publish same thing also in my local blog? Well, it really depends on the definition of your target audiences. If they match then of course it is good idea to translate you post and publish it also to another blog. But if you have different audiences then you may need to modify your posting before publishing it. The questions you have to answer are: is target audience interested in this topic? is target audience expecting more specific and deeper handling of this topic or are they expecting more general handling of topic? is the problem you are discussing actual for target audience or not? You have to answer these questions and after that make your decision. If you need to modify your original posting then take some time and do it. Provide quality to all your readers because they will respect you if you respect them. Cross-posting and referencing It is tempting to save time that preparing some blog post takes and if you have are done with posting in one blog it may seem like good idea to make short posting to another blog and add reference to first one where topic is discussed longer. Well, don’t do it – all your readers expect good quality content from you and jumping from one blog post to another is disturbing for them. Of course, there is problem with differences between target audiences. You may have wider target audience and some people may be interested in more specific handling of topic. In this case feel free to refer your blog you are writing in english. This is not working very well in opposite direction because almost all my global blog readers understand english but not estonian. By example, estonian language is complex one and online translating tools make very poor translations from estonian language. This is why I don’t even plan to publish postings here that refer to my local blog for more information. I am keeping these two blogs as two different worlds and if there is posting that fits well to both blogs I will write my posting to one blog and then answer previous three questions before posting same thing to another blog. Conclusion Growing out of your local market is not anything mysterious if you are living in small country. As it is harder to find people there who are interested in same topics with you then sooner or later you will start finding these new contacts from global audience. Global audience is bigger and to be visible there you must provide high quality content to your audience. It is something you will learn over time and you will learn every day something new when you are posting to your global blog. You may ask: if global blog is much more complex thing to do then is it worth to do at all? My answer is: yes, do it for sure. It is not easy thing to do when you start but if you work on your global blog and improve it over time you will get over all obstacles pretty soon. Just don’t forget one thing – content is king and your readers expect high quality from you.

    Read the article

  • Calculated Fields - Idiosyncracies

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

    Read the article

  • Oracle HRMS API – Create Employee Contact

    - by PRajkumar
    API - hr_contact_rel_api.create_contact Example --   DECLARE      ln_contact_rel_id                   PER_CONTACT_RELATIONSHIPS.CONTACT_RELATIONSHIP_ID%TYPE;      ln_ctr_object_ver_num         PER_CONTACT_RELATIONSHIPS.OBJECT_VERSION_NUMBER%TYPE;      ln_contact_person                 PER_ALL_PEOPLE_F.PERSON_ID%TYPE;      ln_object_version_number  PER_CONTACT_RELATIONSHIPS.OBJECT_VERSION_NUMBER%TYPE;      ld_per_effective_start_date DATE;      ld_per_effective_end_date  DATE;      lc_full_name                            PER_ALL_PEOPLE_F.FULL_NAME%TYPE;      ln_per_comment_id              PER_ALL_PEOPLE_F.COMMENT_ID%TYPE;      lb_name_comb_warning     BOOLEAN;      lb_orig_hire_warning           BOOLEAN;   BEGIN     -- Create Employee Contact     -- -------------------------------------      hr_contact_rel_api.create_contact      (    -- Input data elements            -- -----------------------------            p_start_date                                      => TO_DATE('14-JUN-2011'),            p_business_group_id                    => fnd_profile.value('PER_BUSINESS_GROUP_ID'),            p_person_id                                      => 32979,            p_contact_type                                 => 'M',            p_date_start                                      => TO_DATE('14-JUN-2011'),            p_last_name                                     => 'TEST',            p_first_name                                     => 'CONTACT',            p_personal_flag                               => 'Y',            -- Output data elements            -- --------------------------------           p_contact_relationship_id            => ln_contact_rel_id,           p_ctr_object_version_number      => ln_ctr_object_ver_num,           p_per_person_id                              => ln_contact_person,           p_per_object_version_number     => ln_object_version_number,           p_per_effective_start_date             => ld_per_effective_start_date,           p_per_effective_end_date              => ld_per_effective_end_date,           p_full_name                                       => lc_full_name,           p_per_comment_id                          => ln_per_comment_id,           p_name_combination_warning  => lb_name_comb_warning,           p_orig_hire_warning                      => lb_orig_hire_warning      );    COMMIT; EXCEPTION             WHEN OTHERS THEN                       ROLLBACK;                       dbms_output.put_line(SQLERRM); END; / SHOW ERR;  

    Read the article

  • The Application was unable to start correctly (0xc0000142)

    - by Guy Thomas
    System = Windows 7 64-bit Various programs, notably Regedit, won't start. Instead I get: The Application was unable to start correctly (0xc0000142). Strangly, at least to my thinking, I can launch them via Task Manager. I am also grappling with AVG errors or over-activity, e.g. reports of Broken digital Signature. I am also having problems with Excel Update KB978474 I mention these just incase anyone thinks there is a connection, rather than expecting people to solve 3 problems at once.

    Read the article

  • Microsoft Office documents collaboration - Open Source alternative

    - by Saggi Malachi
    I am looking for a good solution to collaborate on Microsoft Office documents, we currently just edit directly on a Samba share but it's one big mess because sometimes people leave the office with their laptops while docs are open so swap files remain there and then you nobody is sure what's going on. Is there any good and simple open source solution based on Linux? I've tried Alfresco but it is much more than what I need, we got an internal wiki for most collaboration and I just need some solution for the stuff we need to do in Microsoft Office (mostly Excel files, the rest is in the wiki) EDIT: Some more info as requested - we are very small group, 4 full time employees and a few freelancers. The best idea I've got so far is just managing it in a subversion repository with a Lock-Modify-Lock policy but I'd love to hear about better solutions. Thanks!

    Read the article

  • Windows Server 2012 IPAM feature - "Unblock IPAM Access" error/recomended action

    - by HopelessN00b
    So, I'm in the process of setting up an IP Address Management server, using the built-in IPAM feature in Server 2012, and have run into a problem that I'm hoping someone else has successfully solved. Following the technet guide here, I've installed and configured IPAM, and have provisioned it via GPO. After verifying that the PowerShell invoke-ipamgpoprovisioning command is successful, managing the desired servers in IPAM, running gpupdate /force on the servers and refreshing my view in IPAM, I'm still getting the less-than-useful recommended action of "Unblock IPAM Access" for all servers. (First done 3 hours ago, so it's not a give-it-time-to-propagate issue.) Can't, for the life of me, seem to figure out what's causing this, find anything useful in the logs, or find much about this on Google or in the help files, so I was wondering if anyone here had any ideas about how to fix this, or even where to start looking. I'd really like to get this working, because if not, I have to resume work on creating an Excel spreadsheet for IP address management.

    Read the article

  • Using pfSense, OpenVPN Connects but Still Can't See the Network

    - by nicorellius
    I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

    Read the article

  • Terminal Services printing

    - by Adam
    Hi We are using a hosted terminal server to run some applications on. We have three users who connect to the server through RDP and try to print to a networked printer called: HP Photosmart C7280. One of the users is using Windows XP Pro 32-bit on the host and when they print through the terminal server it works fine. Another one of the users is using Vista 32-bit on the host and when they print through the terminal server it works fine. The third user is using Windows 7 64-bit on the host and when they print through the terminal server it only print the first line of the page (A test page print 3/4s of the test page compared to printing all of the page when using the other 2 machines). We are only printing from Word 2007 and Excel 2007 on all machines. The server is Windows 2003. No errors in the event log. Any ideas?

    Read the article

  • .NET Framework generates strange DCOM error

    - by Anders Oestergaard Jensen
    Hello, I am creating a simple application that enables merging of key-value pairs fields in a Word and/or Excel document. Until this day, the application has worked out just fine. I am using the latest version of .NET Framework 4.0 (since it provides a nice wrapper API for Interop). My sample merging method looks like this: public byte[] ProcessWordDocument(string path, List<KeyValuePair<string, string>> kvs) { logger.InfoFormat("ProcessWordDocument: path = {0}", path); var localWordapp = new Word.Application(); localWordapp.Visible = false; Word.Document doc = null; try { doc = localWordapp.Documents.Open(path, ReadOnly: false); logger.Debug("Executing Find->Replace..."); foreach (Word.Range r in doc.StoryRanges) { foreach (KeyValuePair<string, string> kv in kvs) { r.Find.Execute(Replace: Word.WdReplace.wdReplaceAll, FindText: kv.Key, ReplaceWith: kv.Value, Wrap: Word.WdFindWrap.wdFindContinue); } } logger.Debug("Done! Saving document and cleaning up"); doc.Save(); doc.Close(); System.Runtime.InteropServices.Marshal.ReleaseComObject(doc); localWordapp.Quit(); System.Runtime.InteropServices.Marshal.ReleaseComObject(localWordapp); logger.Debug("Done."); return System.IO.File.ReadAllBytes(path); } catch (Exception ex) { // Logging... // doc.Close(); if (doc != null) { doc.Close(); System.Runtime.InteropServices.Marshal.ReleaseComObject(doc); } localWordapp.Quit(); System.Runtime.InteropServices.Marshal.ReleaseComObject(localWordapp); throw; } } The above C# snippet has worked all fine (compiled and deployed unto a Windows Server 2008 x64) with latest updates installed. But now, suddenly, I get the following strange error: System.Runtime.InteropServices.COMException (0x80080005): Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80080005 Server execution failed (Exception from HRESULT: 0x80080005 (CO_E_SERVER_EXEC_FAILURE)). at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean skipCheckThis, Boolean fillCache) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at Meeho.Integration.OfficeHelper.ProcessWordDocument(String path, List`1 kvs) in C:\meeho\src\webservices\Meeho.Integration\OfficeHelper.cs:line 30 at Meeho.IntegrationService.ConvertDocument(Byte[] template, String ext, String[] fields, String[] values) in C:\meeho\src\webservices\MeehoService\IntegrationService.asmx.cs:line 49 -- I googled the COM error, but it returns nothing of particular value. I even gave the right permissions for the COM dll's using mmc -32, where I allocated the Word and Excel documents respectively and set the execution rights to the Administrator. I could not, however, locate the dll's by the exact COM CLSID given above. Very frustrating. Please, please, please help me as the application is currently pulled out of production. Anders EDIT: output from the Windows event log: Faulting application name: WINWORD.EXE, version: 12.0.6514.5000, time stamp: 0x4a89d533 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x00000000 Faulting process id: 0x720 Faulting application start time: 0x01cac571c4f82a7b Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE Faulting module path: unknown Report Id: 041dd5f9-3165-11df-b96a-0025643cefe6 - 1000 2 100 0x80000000000000 2963 Application meeho3 - WINWORD.EXE 12.0.6514.5000 4a89d533 unknown 0.0.0.0 00000000 c0000005 00000000 720 01cac571c4f82a7b C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE unknown 041dd5f9-3165-11df-b96a-0025643cefe6

    Read the article

  • no namenode error in pseudo-mode

    - by Anshu Basia
    I'm new to hadoop and is in learning phase. As per Hadoop Definitve guide, i have set up my hadoop in pseudo distributed mode and everything was working fine. I was even able to execute all the examples from chapter 3 yesterday. Today, when i rebooted my unix and tried to run start-dfs.sh and then tried http://localhost/50070....it is showing error and when i try to stop dfs (stop-dfs.sh) it says no namenode to stop. I have been googling the issue but no result. Also, when i format my namenode again...everything starts working fine and i'm able to connect to the localhost/50070 and even replicate files and directories in hdfs but as soon as i restart my linux and try to connect to hdfs the same problem comes up. Below is the error log: ************************************************************/ 2011-06-22 15:45:55,249 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: STARTUP_MSG: /************************************************************ STARTUP_MSG: Starting NameNode STARTUP_MSG: host = ubuntu/127.0.1.1 STARTUP_MSG: args = [] STARTUP_MSG: version = 0.20.203.0 STARTUP_MSG: build = http://svn.apache.org/repos/asf/hadoop/common/branches/branch-0.20-security-203 -r 1099333; compiled by 'oom' on Wed May 4 07:57:50 PDT 2011 ************************************************************/ 2011-06-22 15:45:56,383 INFO org.apache.hadoop.metrics2.impl.MetricsConfig: loaded properties from hadoop-metrics2.properties 2011-06-22 15:45:56,455 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source MetricsSystem,sub=Stats registered. 2011-06-22 15:45:56,494 INFO org.apache.hadoop.metrics2.impl.MetricsSystemImpl: Scheduled snapshot period at 10 second(s). 2011-06-22 15:45:56,494 INFO org.apache.hadoop.metrics2.impl.MetricsSystemImpl: NameNode metrics system started 2011-06-22 15:45:57,007 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source ugi registered. 2011-06-22 15:45:57,031 WARN org.apache.hadoop.metrics2.impl.MetricsSystemImpl: Source name ugi already exists! 2011-06-22 15:45:57,059 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source jvm registered. 2011-06-22 15:45:57,070 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source NameNode registered. 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: VM type = 32-bit 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: 2% max memory = 19.33375 MB 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: capacity = 2^22 = 4194304 entries 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: recommended=4194304, actual=4194304 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: fsOwner=anshu 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: supergroup=supergroup 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: isPermissionEnabled=true 2011-06-22 15:45:57,868 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: dfs.block.invalidate.limit=100 2011-06-22 15:45:57,869 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: isAccessTokenEnabled=false accessKeyUpdateInterval=0 min(s), accessTokenLifetime=0 min(s) 2011-06-22 15:45:58,769 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: Registered FSNamesystemStateMBean and NameNodeMXBean 2011-06-22 15:45:58,809 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: Caching file names occuring more than 10 times **2011-06-22 15:45:58,825 INFO org.apache.hadoop.hdfs.server.common.Storage: Storage directory /tmp/hadoop-anshu/dfs/name does not exist. 2011-06-22 15:45:58,827 ERROR org.apache.hadoop.hdfs.server.namenode.FSNamesystem: FSNamesystem initialization failed. org.apache.hadoop.hdfs.server.common.InconsistentFSStateException: Directory /tmp/hadoop-anshu/dfs/name is in an inconsistent state: storage directory does not exist or is not accessible. at org.apache.h**adoop.hdfs.server.namenode.FSImage.recoverTransitionRead(FSImage.java:291) at org.apache.hadoop.hdfs.server.namenode.FSDirectory.loadFSImage(FSDirectory.java:97) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.initialize(FSNamesystem.java:379) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.<init>(FSNamesystem.java:353) at org.apache.hadoop.hdfs.server.namenode.NameNode.initialize(NameNode.java:254) at org.apache.hadoop.hdfs.server.namenode.NameNode.<init>(NameNode.java:434) at org.apache.hadoop.hdfs.server.namenode.NameNode.createNameNode(NameNode.java:1153) at org.apache.hadoop.hdfs.server.namenode.NameNode.main(NameNode.java:1162) 2011-06-22 15:45:58,828 ERROR org.apache.hadoop.hdfs.server.namenode.NameNode: org.apache.hadoop.hdfs.server.common.InconsistentFSStateException: Directory /tmp/hadoop-anshu/dfs/name is in an inconsistent state: storage directory does not exist or is not accessible. at org.apache.hadoop.hdfs.server.namenode.FSImage.recoverTransitionRead(FSImage.java:291) at org.apache.hadoop.hdfs.server.namenode.FSDirectory.loadFSImage(FSDirectory.java:97) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.initialize(FSNamesystem.java:379) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.<init>(FSNamesystem.java:353) at org.apache.hadoop.hdfs.server.namenode.NameNode.initialize(NameNode.java:254) at org.apache.hadoop.hdfs.server.namenode.NameNode.<init>(NameNode.java:434) at org.apache.hadoop.hdfs.server.namenode.NameNode.createNameNode(NameNode.java:1153) at org.apache.hadoop.hdfs.server.namenode.NameNode.main(NameNode.java:1162) 2011-06-22 15:45:58,829 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: SHUTDOWN_MSG: /************************************************************ SHUTDOWN_MSG: Shutting down NameNode at ubuntu/127.0.1.1 ************************************************************/ Any help is appreciated Thank-you

    Read the article

  • Exim mail server slow on sending through SMTP

    - by catalint
    It takes about 30 seconds for the server to send me the banner, but initial connection is done instantly only happens when I am at the office, from home it works fine at the office I have a rRns set-up for my client ip that it's not working. Server: Exim, public fixed ip, rDNS, no ports blocked, in a datacenter Config: hostlist loopback = <; 127.0.0.0/8 ; 0.0.0.0 ; ::1 ; 0000:0000:0000:0000:0000:ffff:7f00:0000/8 hostlist senderverifybypass_hosts = net-iplsearch;/etc/senderverifybypasshosts hostlist skipsmtpcheck_hosts = net-iplsearch;/etc/skipsmtpcheckhosts hostlist spammeripblocks = net-iplsearch;/etc/spammeripblocks hostlist backupmx_hosts = lsearch;/etc/backupmxhosts hostlist trustedmailhosts = lsearch;/etc/trustedmailhosts domainlist user_domains = ${if exists{/etc/userdomains} {lsearch;/etc/userdomains} fail} This happens super fast on the server: 30132 ident connection to 89.238.207.49 failed: Connection refused 30132 sender_fullhost = [89.238.207.49] 30132 sender_rcvhost = [89.238.207.49] 30132 Process 30132 is handling incoming connection from [89.238.207.49] 30132 host in host_lookup? no (option unset) 30132 set_process_info: 30132 handling incoming connection from [89.238.207.49] 30132 host in host_reject_connection? no (option unset) 30132 host in sender_unqualified_hosts? no (option unset) 30132 host in recipient_unqualified_hosts? no (option unset) 30132 host in helo_verify_hosts? no (option unset) 30132 host in helo_try_verify_hosts? no (option unset) 30132 host in helo_accept_junk_hosts? yes (matched "*") 30132 using ACL "acl_connect" 30132 processing "accept" 30132 check hosts = +trustedmailhosts 30132 sender host name required, to match against lsearch;/etc/trustedmailhosts 30132 looking up host name for 89.238.207.49 30132 IP address lookup yielded relay.easycomm.ro Client side 2011.09.14 13:08:13 SMTP (mail.server.ro): Begin execution 2011.09.14 13:08:13 SMTP (mail.server.ro): Port: 465, Secure: SSL, SPA: no 2011.09.14 13:08:13 SMTP (mail.server.ro): Finding host 2011.09.14 13:08:13 SMTP (mail.server.ro): Connecting to host 2011.09.14 13:08:13 SMTP (mail.server.ro): Securing connection 2011.09.14 13:08:13 SMTP (mail.server.ro): Connected to host ---> This is a 1 minute 5 seconds gap 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-genius.filipnet.ro ESMTP Exim 4.69 #1 Wed, 14 Sep 2011 13:09:26 +0300 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-We do not authorize the use of this system to transport unsolicited, 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220 and/or bulk e-mail. 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] EHLO CatalinDell 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-genius.filipnet.ro Hello CatalinDell [89.238.207.49] 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-SIZE 52428800 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-PIPELINING 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-AUTH PLAIN LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 HELP 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorizing to server 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] AUTH LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 VXNlcm5hbWU6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] dGVzdEBzcG9ydGd1cnUucm8= 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 UGFzc3dvcmQ6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] ***** 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 235 Authentication succeeded 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorized to host 2011.09.14 13:09:18 SMTP (mail.server.ro): Connected to host 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] MAIL FROM: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 OK 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] RCPT TO: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 Accepted 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] DATA 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 354 Enter message, ending with "." on a line by itself 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] . ---> This is a 1 minute 10 seconds gap 2011.09.14 13:10:28 SMTP (mail.server.ro): <rx> 250 OK id=1R3mPG-0004T4-7Q 2011.09.14 13:10:28 SMTP (mail.server.ro): End execution --- Initial info I've setup an email account on "Windows Live Mail" that comes with Windows 7 Receiving is super fast, but for some reason sending is very slow, I had to increase the outgoing timeout to 3 minutes in order to make it work. Server software is Exim / Dovecot / cPanel. Do you have any ideeas why there is a slow sending process? Thank you!

    Read the article

  • Installing multiple php versions plus extensions on freebsd

    - by jgtumusiime
    I'm a currently learning how to work with freebsd. Lately I have been trying to run multiple php versions along with their respective packages. However, I seem to be running into issues while making installations. The default location for my php installation is /usr/local/etc/, however I want to be able to install php5.2, php5.3 and php5.4 in /usr/local/etc/php52, /usr/local/etc/php53 and /usr/local/etc/php54 respectively. Using ports I simply achieved this by doing cd /usr/ports/lang/php5x && make PREFIX="/usr/local/etc/php5x" install clean. The problem now is: How do I do the same for extensions of all my PHP versions? When I try installing php-extensions like so: cd /usr/ports/lang/php5x-extension && make PREFIX="/usr/local/etc/php5x/lib/php" install clean, I get this error ... ===> PHPizing for php53-bcmath-5.3.17 env: /usr/local/bin/phpize: No such file or directory *** Error code 127 Stop in /usr/ports/math/php53-bcmath. *** Error code 1 Stop in /usr/ports/lang/php53-extensions. My PHPize is located in /usr/local/etc/php5x/bin/phpize So how do I get make or whatever to look for phpize in the right path? Is there a cleaner, may be simpler way of maintaining multiple php installations? I need to achieve this because of compatibility issues from some legacy code that runs on 5.2 and breaks on 5.3. Thank you. ================= So I successfully installed an configured freebsd jail and I would like to install software within my jail but I cannot connect to the network. Here is my rc.conf jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# I created a /etc/resolv.conf for nameservers mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/home/jtumusiime]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/home/jtumusiime]# I have an updated copy of freebsd 7.1 source in /usr/src/ and I did #make buildworld while building the first jail mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all on vail

    Read the article

  • How to fade away the icon in the dock when close the program in Mac OSX

    - by Magic
    I'm using Mac OSX Mountain Lion. But some program in the dock confusing me. When I close some program(upper left close button). The icon in the dock fade away. That mean the process close. But some program doesn't fade away(mean the process still alive), And I don't select the "Show in Dock" option. Like Microsoft Office(Word, Excel). It's too annoying. What I want is when I click the upper left close button. The icon will fade away and the program close?

    Read the article

  • Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

    - by carbotex
    I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

    Read the article

  • How to cluster two IIS servers for failover?

    - by Ram Gopal
    We have IIS servers running in 2 machines hosting few webservices which provided some integration services to an old document Mgmt system, word/excel related service, etc.... We need to cluster/load balance these 2 IIS in order to achieve a fail-over. i.e If one of the IIS server is down, the other on should be able to handle the request. The reverse proxy used in the DMZ is also IIS 7.5 Our overall business application is in fact a J2EE one and we have successfully deployed on a weblogic cluster installed on the same two machines and load balance from the same above mentioned IIS reverse proxy at DMZ. But we do not know how to achieve this in case of IIS.

    Read the article

  • OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

    - by Vladimir Kadalashvili
    I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

    Read the article

  • Audio Recording with Appcelerator on Android

    - by user951793
    I would like to record audio and then send the file to a webserver. I am using Titanium 1.8.2 on Win7. The application I am woring on is both for Android and iphone and I do realise that Titanium.Media.AudioRecorder and Titanium.Media.AudioPlayer are for these purpose. Let's concentrate on android for a while. On that platform you can achieve audio recording by creating an intent and then you handle the file in your application. See more here. This implementation has a couple of drawbacks: You cannot stay in your application (as a native audio recorder will start up) You only get back an uri from the recorder and not the actual file. Another implementation is done by Codeboxed. This module is for recording an audio without using intents. The only problem that I could not get this working (along with other people) and the codeboxed team does not respond to anyone since last year. So my question is: Do you know how to record audio on android without using an intent? Thanks in advance. Edit: My problem with codeboxed's module: I downloaded the module from here. I copied the zip file into my project directory. I edited my manifest file with: <modules> <module platform="android" version="0.1">com.codeboxed.audiorecorder</module> </modules> When I try and compile I receive the following error: [DEBUG] appending module: com.mwaysolutions.barcode.TitaniumBarcodeModule [DEBUG] module_id = com.codeboxed.audiorecorder [ERROR] The 'apiversion' for 'com.codeboxed.audiorecorder' in the module manifest is not a valid value. Please use a version of the module that has an 'apiversion' value of 2 or greater set in it's manifest file [DEBUG] touching tiapp.xml to force rebuild next time: E:\TitaniumProjects\MyProject\tiapp.xml I can manage to recognise the module by editing the module's manifest file to this: ` version: 0.1 description: My module author: Your Name license: Specify your license copyright: Copyright (c) 2011 by Your Company apiversion: 2 name: audiorecorder moduleid: com.codeboxed.audiorecorder guid: 747dce68-7d2d-426a-a527-7c67f4e9dfad platform: android minsdk: 1.7.0` But Then again I receive error on compiling: [DEBUG] "C:\Program Files\Java\jdk1.6.0_21\bin\javac.exe" -encoding utf8 -classpath "C:\Program Files (x86)\Android\android-sdk\platforms\android-8\android.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-media.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-platform.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\titanium.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\thirdparty.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\jaxen-1.1.1.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-locale.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-app.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-gesture.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-analytics.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\kroll-common.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-network.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\ti-commons-codec-1.3.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-ui.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-database.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\kroll-v8.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-xml.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\android-support-v4.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-filesystem.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\modules\titanium-android.jar;E:\TitaniumProjects\MyProject\modules\android\com.mwaysolutions.barcode\0.3\barcode.jar;E:\TitaniumProjects\MyProject\modules\android\com.mwaysolutions.barcode\0.3\lib\zxing.jar;E:\TitaniumProjects\MyProject\modules\android\com.codeboxed.audiorecorder\0.1\audiorecorder.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\kroll-apt.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\lib\titanium-verify.jar;C:\Users\Gabor\AppData\Roaming\Titanium\mobilesdk\win32\1.8.2\android\lib\titanium-debug.jar" -d E:\TitaniumProjects\MyProject\build\android\bin\classes -proc:none -sourcepath E:\TitaniumProjects\MyProject\build\android\src -sourcepath E:\TitaniumProjects\MyProject\build\android\gen @c:\users\gabor\appdata\local\temp\tmpbqmjuy [ERROR] Error(s) compiling generated Java code [ERROR] E:\TitaniumProjects\MyProject\build\android\gen\com\petosoft\myproject\MyProjectApplication.java:44: cannot find symbol symbol : class AudiorecorderBootstrap location: package com.codeboxed.audiorecorder runtime.addExternalModule("com.codeboxed.audiorecorder", com.codeboxed.audiorecorder.AudiorecorderBootstrap.class); ^ 1 error

    Read the article

  • Can't Remove Logical Drive/Array from HP P400

    - by Myles
    This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

    Read the article

  • Saving a modified InfoPath form to its form library

    - by Nathan Lykken
    Within our corporate SharePoint 2007 site, there is a particular form library that contains 10 separate files. 9 of these are either Excel, Word, or PowerPoint files and one of these is an InfoPath 2007 form that serves as a report. After noticing an error within this InfoPath form, I saved this InfoPath form to my local directory and then, within the design mode of InfoPath, I modified this InfoPath form. What is the proper way to save this modified InfoPath form to its form library? Everything that I have tried results in nobody except myself having access to this modified InfoPath form. I can open this InfoPath form without error but when my coworkers try to open this InfoPath form on their machines, they receive this error: “The form cannot be opened because it requires the domain permission level and it currently has restricted permission. To fix this problem, open the form from the location it was published to."

    Read the article

  • Rerouting traffic from port 80 to another port on a single ip

    - by zam
    I have a server with multiple IP addresses associated with it. I'm trying to run a node.js web server (which I do not want to run as root), using only one of those ip addresses (it would be very bad if the traffic from all the ip addresses were forwarded). Through searching superuser, it looked like this could be possible with iptables: How to setting up iptables for traffic fowarding on port 80 from specific sources iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 --source 212.333.111.222 -j REDIRECT --to-port 9020 However, I do not understand why eth0 is needed. According to: http://blog.softlayer.com/2011/iptables-tips-and-tricks-port-redirection/ this could be done with: iptables -t nat -A PREROUTING -p tcp --dport 2525 -j REDIRECT --to-ports 25 What is the correct way of forwarding traffic from a single ip on port 80, lets say 111.111.111.111:80 to another port on the same server, lets say 111.111.111.111:8765? thanks for your help!

    Read the article

  • SSRS Subscription Fails

    - by Chad
    Our SSRS server is not executing a subscription correctly. (Only subscription we have btw) We created a subscription to export a report as an excel file to the file system. Tried running the job that gets generated, and this error happens 'EXECUTE AS LOGIN' failed for the requested login 'NT AUTHORITY\NETWORK SERVICE'. The step failed. It's not the most helpful in tracking down what exactly it was trying to do. EDIT Digging further into the logs I also get these errors w3wp!extensionfactory!f!7/30/2010-14:29:26:: w WARN: The extension Report Server FileShare does not have a LocalizedNameAttribute. w3wp!extensionfactory!11!7/30/2010-14:34:48:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.

    Read the article

  • Exchange 2010 OWA with Client Certificates

    - by Christian
    I have enabled Client Certificate Authentication for Exchange 2010 through IIS7 and the users are prompted to choose their User Certificate when they log in, but they are all then presented with the following error message Request Url: https://<domain_name>:443/owa/ User host address: <server_ip_address> OWA version: 14.1.355.2 Exception Exception type: System.NullReferenceException Exception message: Object reference not set to an instance of an object. Call stack Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.GetUserIdentities(OwaContext owaContext, OwaIdentity& logonIdentity, OwaIdentity& mailboxIdentity, Boolean& isExplicitLogon, Boolean& isAlternateMailbox, ExchangePrincipal& logonExchangePrincipal) Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext owaContext) Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext owaContext) Microsoft.Exchange.Clients.Owa.Core.OwaRequestEventInspector.OnPostAuthorizeRequest(Object sender, EventArgs e) System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) The method I followed to enable Certificate authentiaction was from this post: http://www.miru.ch/2011/04/how-to-enable-certificate-based-authentication-on-exchange-2010/ Any ideas? Google isn't being very helpful

    Read the article

  • How to create a text file from column and FTP that text file to server

    - by addi
    I have workbook with 2 sheets (Sheet1 and sheet2). On sheet1 user will enter the data which will be populated in the column B and then column C will hold the values from Col A and B on sheet2. I need to create a text file from the values in coloumn C on a click of a button and then upload(FTP) that file to a server. So the sheet1 will have 2 buttons. Button1 will save the excel file and create the text file in windows temp directory. e.g text.xls text.prop (text file whoch has all the values in column C on sheet2) Button2 will upload (FTP) the text file (.prop) to a server. Can anyone please send me the steps and VB code to achieve the above tasks? Thanks in Advance Addi

    Read the article

  • Online backup solution

    - by Petah
    I am looking for a backup solution to backup all my data (about 3-4TB). I have look at many services out there, such as: http://www.backblaze.com/ http://www.crashplan.com/ Those services look very good, and a reasonable price. But I am worried about them because of incidents like this: http://jeffreydonenfeld.com/blog/2011/12/crashplan-online-backup-lost-my-entire-backup-archive/ I am wondering if there is any online back solution that offers a service level agreement (SLA) with compensation for data loss at a reasonable price (under $30 per month). Or is there a good solution that offers a high enough level of redundancy to mitigate the risk? Required: Offsite backup to prevent data loss in terms of fire/theft. Redundancy to protect the backup from corruption. A reasonable cost (< $30 per month). A SLA in case the service provider faults on its agreements.

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >