Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 262/624 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

    - by keepitsimpleengineer
    I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

    Read the article

  • Updating PHP in CenOS

    - by Reza
    I followed this tutorial to update PHP from 5.3 version to 5.4. My distro is CentOS 5.5. after running following command: yum --enablerepo=remi,remi-test install httpd php php-common I get following error: --> Missing Dependency: php-common = 5.3.13-1.w5 is needed by package php-zts-5.3.13-1.w5.i386 (installed) Error: Missing Dependency: php-common = 5.3.13-1.w5 is needed by package php-zts-5.3.13-1.w5.i386 (installed) Error: php53-common conflicts with php-common You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. How can I solve this error?

    Read the article

  • Project Euler 14: (Iron)Python

    - by Ben Griswold
    In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 14.  As always, any feedback is welcome. # Euler 14 # http://projecteuler.net/index.php?section=problems&id=14 # The following iterative sequence is defined for the set # of positive integers: # n -> n/2 (n is even) # n -> 3n + 1 (n is odd) # Using the rule above and starting with 13, we generate # the following sequence: # 13 40 20 10 5 16 8 4 2 1 # It can be seen that this sequence (starting at 13 and # finishing at 1) contains 10 terms. Although it has not # been proved yet (Collatz Problem), it is thought that all # starting numbers finish at 1. Which starting number, # under one million, produces the longest chain? # NOTE: Once the chain starts the terms are allowed to go # above one million. import time start = time.time() def collatz_length(n): # 0 and 1 return self as length if n <= 1: return n length = 1 while (n != 1): if (n % 2 == 0): n /= 2 else: n = 3*n + 1 length += 1 return length starting_number, longest_chain = 1, 0 for x in xrange(1, 1000001): l = collatz_length(x) if l > longest_chain: starting_number, longest_chain = x, l print starting_number print longest_chain # Slow 31 seconds print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

    Read the article

  • HTG Explains: Just How Bad Are Android Tablet Apps?

    - by Chris Hoffman
    Apple loves to criticize the state of Android tablet apps when pushing its own iPad tablets. But just how bad is the Android tablet app situation? Should you avoid Android tablets like the Nexus 7 because of the apps? It’s clear that Apple’s iPad is way ahead when it comes to the sheer quantity of tablet-optimized apps. It’s also clear that some popular apps — particularly touch-optimized games — only show up on iPad. But that’s not the whole story. The Basics First, let’s get an idea of the basic stuff that will work well for you on Android. An excellent web browser. Chrome has struggled with performance on Android, but hits its stride on the Nexus 7 (2013). Great, tablet-optimized apps for all of Google’s services, from YouTube to Gmail and Google Maps. Everything you need for reading, from Amazon’s Kindle app for eBooks, Flipboard and Feedly for new articles from websites, and other services like the popular Pocket read-it-later service. Apps for most popular media services, from Netflix, Hulu, and YouTube for videos to Pandora, Spotify, and Rdio for music. A few things aren’t available — you won’t find Apple’s iTunes and Amazon still doesn’t offer an Amazon Instant Video app for Android, while they do for iPad and even their own Android-based Kindle Fire devices. Android has very good app coverage when it comes to consuming content, whether you’re reading websites and ebooks or watching videos and listening to music. You can play almost any Android smartphone game, too. For content consumption, Android is better than something like Windows 8, which lacks apps for Google services like YouTube and still doesn’t have apps for popular media services like Spotify and Rdio. How Android Scales Smartphone Apps Let’s look at how Android scales smartphone apps. Now, bear with us here — we know “scaling” is a dirty word considering how poorly Apple’s iPad scales iPhone apps, but it’s not as bad on Android. When an iPad runs an iPhone app, it simply doubles the pixels and effectively zooms in. For example, if you had  Twitter app with five tweets visible at once on an iPhone and ran the same app on an iPad, the iPad would simply “zoom in” and enlarge the same screen — you’d still see five tweets, but each tweet would appear larger. This is why developers create optimized iPad apps with their own interfaces. It’s especially important on Apple’s iOS. Android devices come in all shapes and sizes, so Android apps have a smarter, more intelligent way to adapt to different screen sizes. Let’s say you have a Twitter app designed for smartphones and it only shows five tweets at once when run on a phone. If you ran the same app on a tablet, you wouldn’t see the same five tweets — you’d see ten or more tweets. Rather than simply zooming in, the app can show more content at the same time on a tablet, even if it was never optimized for tablet-size screens. While apps designed for smartphones aren’t generally ideal, they adapt much better on Android than they do on an iPad. This is particularly true when it comes to games. You’re capable of playing almost any Android smartphone game on an Android tablet, and games generally adapt very well to the larger screen. This gives you access to a huge catalog of games. It’s a great option to have, especially when you look at Microsoft’s Window 8 and consider how much better the touch-based app and game selection would be if Microsoft allowed its users to run Windows Phone games on Windows 8. 7-inch vs 10-inch Tablets The Twitter example above wasn’t just an example. The official Twitter app for Android still doesn’t have a tablet-optimized interface, so this is the sort of situation you’d have to deal with on an Android tablet. On the popular Nexus 7, Twitter is an example of a smartphone app that actually works fairly well — in portrait mode, you can see many more tweets on screen at the same time and none of the space really feels all that wasted. This is important to consider — smartphone apps like Twitter often scale quite well to 7-inch screens because a 7-inch screen is much closer in form factor to a smartphone than a 10-inch screen is. When you begin to look at 10-inch Android tablets that are the same size as an iPad, the situation changes. While the Twitter app works well enough on a Nexus 7, it looks horrible on a Nexus 10 or other 10-inch tablet. Running many smartphone-designed apps — possible with the exception of games — on a 10-inch tablet is a frustrating, poor experience. There’s much more white, empty space in the interface. It feels like you’re using a smartphone app on a large screen, and what’s the point of that? A tablet-optimized Twitter app for Android is finally on its way, but this same situation will repeat with many other types of apps. For example, Facebook doesn’t offer a tablet-optimized interface, but it’s okay on a Nexus 7 anyway. On a 10-inch screen, it probably wouldn’t be anywhere near as nice an experience. It goes without saying that Facebook and Twitter both offer iPad apps with interfaces designed for a tablet-size screen. Here’s another problematic app — the official Yelp app for Android. Even just using it on a 7-inch Nexus 7 will be a poor experience, while it would be much worse on a larger 10-inch tablet app. Now, it’s true that many — maybe even most — of the popular apps you might want to run today are optimized for Android tablets. But, when you look at the situation when it comes to popular apps like Twitter, Facebook, and Yelp, it’s clear Android is still behind in a meaningful way. Price Let’s be honest. The thing that really makes Android tablets compelling — and the only reason Android tablets started seeing real traction after years of almost complete dominance by Apple’s iPads — is that Android tablets are available for so much cheaper than iPads. Google’s latest Nexus 7 (2013) is available for only $230. Apple’s non-retina iPad Mini is available at $300, which is already $70 more. In spite of that, the iPad Mini has much older, slower internals and a much lower resolution screen. It’s not as nice to look at when it comes to reading or watching movies, and the iPad Mini reportedly struggles to run Apple’s latest iOS 7. In contrast, the new Nexus 7 has a very high resolution screen, speedy internals, and runs Android very well with little-to-no lag in real use. We haven’t had any problems with it, unlike all the problems we unfortunately encountered with the first Nexus 7. For a really comparable experience to the current Nexus 7, you’d want to get one of Apple’s new retina iPad Minis. That would cost you $400, another $170 over the Nexus 7. In fact, it’s possible to regularly find sales on the Nexus 7, so if you waited you could get it for just $200 — half the price of the iPad mini with a comparable screen and internals. (In fairness, the iPad certainly has better hardware — but you won’t feel if it you’re just using your tablet to browse the web, watch videos, and do other typical tablet things.) This makes a tablet like the popular Nexus 7 a very good option for budget-conscious users who just want a high-quality device they can use to browse the web, watch videos, play games, and generally do light computing. There’s a reason we’re focusing on the Nexus 7 here. The combination of price and size brings it to a very good place. It’s awfully cheap for the high-quality experience you get, and the 7-inch screen means that even the non-tablet-optimized apps you may stumble across will often work fairly well. On the other hand, more expensive 10-inch Android tablets are still a tougher sell. For $400-$500, you’re getting awfully close to Apple’s full-size iPad price range and Android tablets don’t have as good an app ecosystem as an iPad. It’s hard to recommend an expensive, 10-inch Android tablet over a full-size iPad to average users. In summary, the Android app tablet app situation is nowhere near as bad as it was a few years ago. The success of the Nexus 7 proves that Android tablets can be compelling experiences, and there are a wide variety of strong apps. That said, more expensive 10-inch Android tablets that compete directly with the full-size iPad on price still don’t make much sense for most people.  Unless you have a specific reason for preferring an Android tablet, it’s tough not to recommend an iPad if you’re looking at spending $400+ on a 10-inch tablet. Image Credit: Christian Ghanime on Flickr, Christian Ghanime on Flickr     

    Read the article

  • Guidance in naming awkward domain-specific objects?

    - by GlenH7
    I'm modeling a chemical system, and I'm having problems with naming my objects within an enum. I'm not sure if I should use: the atomic formula the chemical name an abbreviated chemical name. For example, sulfuric acid is H2SO4 and hydrochloric acid is HCl. With those two, I would probably just use the atomic formula as they are reasonably common. However, I have others like sodium hexafluorosilicate which is Na2SiF6. In that example, the atomic formula isn't as obvious (to me) but the chemical name is hideously long: myEnum.SodiumHexaFluoroSilicate. I'm not sure how I would be able to safely come up with an abbreviated chemical name that would have a consistent naming pattern. From a maintenance point of view, which of the options would you prefer to see and why? Some details from comments on this question: Audience for the code will be just programmers, not chemists. I'm using C#, but I think this question is more interesting when ignoring the implementation language I'm starting with 10 - 20 compounds and would have at most 100 compounds. The enum is to facilitate common calculations - the equation is the same for all compounds but you insert a property of the compound to complete the equation. For example, Molar mass (in g/mol) is used when calculating the number of moles from a mass (in grams) of the compound. Another example of a common calculation is the Ideal Gas Law and its use of the Specific Gas Constant

    Read the article

  • named-checkzone reports 'ns.example.com.ns' has no address records (A or AAAA)

    - by hydroparadise
    The first thing I see wrong is that its a recursion problem. But I'm not sure where the problems lie in my reverse lookup file. ns should report back as ns.example.com but instead getting ns.example.com.ns. Of course it wouldn't find any entries for that name because there isn't one, nor is it supposed to. Here's my reverse file: $TTL 86400 @ IN SOA ns.example.com root.example.com. ( 16071990 ; Serial 3600 ; Refresh 1800 ; Retry 604800 ; Expire 86400 ; Minimum TTL ) @ IN NS ns.example.com It's not extraordinarily complicated. What my question is, what other files affect the output for named-checkzone when checking a name against the revers file?

    Read the article

  • Record management system java web framework

    - by Kamil Tomšík
    We're currently reconsidering technologies and frameworks to get more agile with "simple" RMS CRUD-based projects. In short, short-living things like this Right now we have a custom extension on top of SmartGWT but after some time it has proven not to be flexible enough. I also personally dislike the java-js compilation process and the whole GWT codebase. Not only is the design ugly, it also makes certain low-level js things very complicated if not completely impossible. So what I'm looking for is: closest to web as possible, like JSF or possibly Tapestry, it is very important to be able get "low" and weave framework if necessary. Happens more often than we thought. datagrid capable - Ext.js & PrimeFaces looks pretty good, Vaadin does too. db-schema generators (optional, no matter in which way) If it were only on me, I'd probably stick to Ext.js + custom rest-based java solution, possibly generated from database schema (not sure about concrete tooling yet). I only have experience with vanilla Ext.js, vanilla GWT and JSF 2.0 / Seam, so it hard for me to judge or even propose other frameworks. What would be your proposition? What are the problems you've faced? What was your solution and how hard do you think it was to deal with them in "big picture"?

    Read the article

  • Win 7 BSOD stucks at dumping

    - by AFO
    Recently Ive been getting frequent bsods, which always gets stuck at dumping without finishing it, with most of them showing no error messages. This never happened before i upgraded to new rams, but 2 passes of memtest86 turned out fine. Tried reinstalling windows, problem still there. Tried initiating a manual crash, and that did create a successful dump. The SSD win 7 is on doesn't seem to have any problems, crystaldisk says its healthy. Varied the cpu multiplier between stock and +500Mhz, crashed regardless. Left voltage control to auto. Im fairly sure its a hardware problem, just cant pinpoint which specific part(s). The specs- Windows 7 x64 (1 day old) 955 x4 BE c3 (running at stock) (3.5 years old) GA-970A-D3 (1.5 years old) Gigabyte 6950, unlocked to 6970 (still at 6950 speeds) (<3 years old) 2x4GB 1600 CL9 HyperX Blu (running at 11-11-11, default motherboard setting) (<1 month old) Plextor M5s (around 5 months)

    Read the article

  • Meinberg ntp for Windows - force more frequent updates?

    - by ana
    I have a Windows VM that has time drift problems, and left to its own devices will drift by minutes per day. I know there are issues with time on VMs, but I was hoping using the Meinberg NTP service would be successful. It works, generally, in that the time gets corrected in one big step about once every 70mins when it's at about 10mins offset. This has totally confused me as I thought NTP was meant to drift gently back towards the right time, and panic and die if the offset was more than 3 minutes. So (a) what is happening and (b) how do I make it update more regularly?

    Read the article

  • OpenVPN server behind firewall issues

    - by Gabriel
    I'm trying to setup an OpenVPN but I do have some problems doing it. This is my scenario: INTERNET --- HOME ROUTER (10.1.0.0/28) --- FIREWALL SERVER (DEFAULT GATEWAY FOR MY INTERNAL LAN 10.1.0.2) --- OpenVPN Server (10.1.0.9 LAN | 10.2.0.1 VPN) single nic / bridge iface I can connect to my VPN server successfully (it gets the 10.2.0.5 address). Though, I'm not able to ping anything, neither my VPN server, nor my lan clients. I guess the problem is on the firewall. I'm not really an expert on iptables, I tried adding plenty of different rules without success. I would appreciate a lot if someone could explain me how to get to work the VPN server in this scenario. After connecting through VPN, when I try to ping the server, I'm not really sure about how the ping message gets to the server and how the response should go back to the client. Thanks a lot Gabriel

    Read the article

  • FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!

    - by Daniel Mortimer
    Introduction There is nothing more frustrating than a problem that "cannot be reproduced". Logs, configuration files have been analysed but there just isn't enough information to establish the root cause. The issue maybe closed, but you are left with the feeling that the problem will raise its ugly head again in the future. Trouble is, to resolve such issues you need to capture diagnostic data at the exact time the incident occurs. Step forward Fusion Middleware Diagnostic Framework!  Diagnostic Framework monitors WebLogic Managed Servers and delivers "Automatic capture of diagnostic data upon first failure". To quote fromOracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems "When a critical error occurs ... the Diagnostic Framework automatically collects diagnostics, such as thread dumps, DMS metric dumps, and WebLogic Diagnostics Framework (WLDF) server image dumps ... The data is stored in a file-based repository and is accessible with command-line utilities." In other words the data collected upon first failure - especially the thread and image dumps - provides a snapshot of the system as or immediately after the problem occurs. The table below shows the type of WebLogic Server issues which fall into the scope of Diagnostic Framework How to Configure Diagnostic Framework? Depending on your Fusion Middleware product choice you may not need to do anything! Diagnostic Framework is automatically installed, configured and initiated for any WebLogic Domain which has the Oracle Java Required Files (JRF) template applied. This template is applied by default whenever you configure WebLogic Managed Servers for products such as Portal / Forms / Reports / Discoverer Identity Management ( OID , OAM , OIM etc) WebCenter SOA Check your WebLogic Domain directory structure. If you have an "adr" sub directory under DOMAIN_HOME/servers/<servername>/ then JRF template has been applied and Diagnostic Framework will be in play. Should the "adr" sub directory not exist, review the advice given in My Oracle Support article How to Apply FMW ( EM ) Control and JRF to a WebLogic Domain and Managed Servers [ID 947043.1] If you are working with a standalone WebLogic Server solution and applying Oracle JRF is not acceptable, consider using WLDF - WebLogic Diagnostic Framework. (Fusion Middleware Diagnostic Framework makes use of WLDF under the covers.) Couple of useful links about WLDF are listed below Configuring and Using the Diagnostics Framework for Oracle WebLogic Server 11g WebLogic Diagnostics Framework-A Very Useful Tool [A nice blog which describes a WLDF use case] How to Get Started With Diagnostic Framework To be frank, the Fusion Middleware Administrator's Guide is the best place to start your learning Oracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems A lot of reading here,  but if you are in hurry and just want to get the right information to Oracle Support to help resolve your issue, check out the next section below. How to Upload Diagnostic Framework Incident Data to Oracle Support Some Background Information There are three interfaces to the Repository: Enterprise Manager Cloud Control (Support Workbench) WLST (Command Line) ADRCI (Command Line) The Enterprise Manager Cloud Control does provide a nice GUI interface to search, view and package diagnostic framework incidents. However, this software is not to be confused with Fusion Middleware (EM) Control. Cloud Control (formerly known as Grid Control) is part of the Enterprise Manager media package. EM Cloud Control has it's own install and configuration story. Therefore, for the benefit of those yet to install and play with Cloud Control, I am going to describe how to use the command line tools. Ideally, you would only need to one command line interface, but currently I suggest using both - mainly due to the fact that ADRCI SHOW INCIDENTS does not reveal the description behind the Diagnostic Framework error code. Instructions: Note: WLST and ADRCI are case sensitive when it comes to handling parameter values. If you make a mistake, expect an unfriendly syntax error message. 1) Find the incident Note: The managed server which you are troubleshooting must be up and running. If the managed server is down, ensure the domain's Admin Server is accessible. If you cannot connect to the Admin Server or the Managed Server the example WLST commands will not work. a) Launch WLST  Note: Use the WLST which resides in the "oracle_common" directory (not WL_HOME/common/bin) otherwise you will get a syntax error like the one below Traceback (innermost last):  File "<console>", line 1, in ?NameError: listIncidents MW_HOME/oracle_common/common/bin/wlst.sh b) Connect to the managed server or the admin server e.g. wls:/offline> connect('weblogic','welcome1','t3://localhost:7020') c) Run the command wls:/MyDomain/serverConfig> listIncidents() This will list the incidents for the server to which you have connected. If you have connected to the Admin Server and want to list the incidents for a managed server within the domain, use the command wls:/MyDomain/serverConfig> listIncidents(adrHome='diag\ofm\MyDomain\MyManagedServer' ,server='MyManagedServer') Example output Incident Id     Problem Key              Incident Time         1       DFW-99998 [java.lang.NullPointerException] [oracle.error.simulator.ErrorSimulator.createNullPointerException][errorWebApp_1-0-0-0]        Fri Nov 02 10:38:46 GMT 2012  The piece highlighted in bold is the description you do not see when using the ADRCI 'SHOW INCIDENT' command. Make a note of the incident id. You are ready to move to step 2 2. Package the incident a) Set up the environment - example commands below are for Unix cd <DOMAIN_HOME>/bin . ./setDomainEnv.sh If you want ADRCI to run a Remote Diagnostic Agent collection (recommended) at generate package time, point ORACLE_HOME at oracle_common ORACLE_HOME=$MW_HOME/oracle_common; export ORACLE_HOME To prevent ADRCI from running RDA at generate package time, point ORACLE_HOME at WL_HOME/server/adr directory.  ORACLE_HOME=$WL_HOME/server/adr; export ORACLE_HOME b) Launch adrci $WL_HOME/server/adr/adrci c) Set BASE and HOMEPATH adrci> SET BASE /oracle/middleware/user_projects/domains/ mydomain/servers/mymanagedserver/adr adrci> SET HOMEPATH diag/ofm/mydomain/mymanagedserver d)  Optionally run SHOW INCIDENTS e.g. adrci> SHOW INCIDENTS -MODE DETAIL ADR Home = /oracle/middleware/user_projects/domains/mydomain/ servers/mymanagedserver/adr/diag/ofm/mydomain/mymanagedserver:***********************************************************************************************************************************INCIDENT INFO RECORD 1**********************************************************   INCIDENT_ID                   1   STATUS                        ready   CREATE_TIME                   2012-11-02 10:38:46.468000 +00:00   PROBLEM_ID                    1   CLOSE_TIME                    <NULL>   FLOOD_CONTROLLED              none   ERROR_FACILITY                DFW   ERROR_NUMBER                  99998   ERROR_ARG1                    <NULL>   ERROR_ARG2                    <NULL>   ERROR_ARG3                    <NULL>   ERROR_ARG4                    <NULL>   ERROR_ARG5                    <NULL>   ERROR_ARG6                    <NULL>   ERROR_ARG7                    <NULL>   ERROR_ARG8                    <NULL>   ERROR_ARG9                    <NULL>   ERROR_ARG10                   <NULL>   ERROR_ARG11                   <NULL>   ERROR_ARG12                   <NULL>   SIGNALLING_COMPONENT          <NULL>   SIGNALLING_SUBCOMPONENT       <NULL>   SUSPECT_COMPONENT             <NULL>   SUSPECT_SUBCOMPONENT          <NULL>   ECID                          5162744c6a2eea5e:155ff445:13ac0aae7cb:-8000-0000000000000325   IMPACTS                       01 rows fetched e)  Create a logical package IPS CREATE PACKAGE INCIDENT incident_number e.g. adrci> IPS CREATE PACKAGE INCIDENT 1Created package 1 based on incident id 1, correlation level typical f) Generate the package IPS GENERATE PACKAGE package_number IN path e.g. adrci> IPS GENERATE PACKAGE 1 IN /tmp Generated package 1 in file /tmp/DFW99998j_20121102113633_COM_1.zip, mode complete Note: If the generate package command hangs, ADRCI may be experiencing an issue when running RDA. To avoid such trouble, exit ADRCI and point the ORACLE_HOME environment variable at WL_HOME/server/adr 3) Upload the package zip to Oracle Support via your Service Request a) Log into My Oracle Support and locate your Service Request b) Click on "Add Attachments c) And upload the zip file

    Read the article

  • Functional Languages that compile to Android's Dalvik VM?

    - by Berin Loritsch
    I have a software problem that fits the functional approach to programming, but the target market will be on the Android OS. I ask because there are functional languages that compile to Java's VM, but Dalvik bytecode != Java bytecode. Alternatively, do you know if the dx utility can intelligently convert the .class files generated from functional languages like Scala? Edit: In order to add a bit more helpfulness to the community, and also to help me choose better, can I refine the question a bit? Have you used any alternate languages with Dalvik? Which ones? What are some "gotchas" (problems) that I might run into? Is performance acceptable? By that, I mean the application still feels responsive to the user. I've never done mobile phone development, but I grew up on constrained devices and I'm under no illusion that there is a cost to using non-standard languages with the platform. I just need to know if the cost is such that I should shoe-horn my approach into default language (i.e. apply functional principles in the OOP language).

    Read the article

  • Where is the Flash in Chrome?

    - by Daniel
    I installed Google Chrome. This is the first thing I did after installing Ubuntu. I went into firefox, and went to chrome.google.com, and hit the button. I don't like package managers, and avoid the command line like the pox. Then, I started using Google Chrome. I went to Kongregate, and clicked on a game. It told me I didn't have flash. A few different websites told me the same. I assumed that they must have been wrong. I hit the link to Adobe, to install Flash, and it reassured me; of course, Google Chrome includes Flash. I checked my version - Chrome 5.0.375.126. Of course, I just downloaded it. I scoured the internet for solutions. None worked. Many seemed to involve re-enabling Flash, or something like that. But insofar as I can tell, there is no Flash anywhere in my Chrome. I feel like I bought a Reese's cup, and found solid chocolate. I checked in the Chrome plugin manager, and everything. A few solutions told me to copy some garbage into my command line and hit enter (as almost all solutions to problems on linux entail). I did it, reluctantly, and it did nothing. I thought Flash was supposed to come with Chrome. But it didn't. Sooooo... What gives? Google Chrome version: Google Chrome 5.0.375.126 (Official Build 53802) WebKit 533.4 V8 2.1.10.15 User Agent Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.126 Safari/533.4 Command Line /opt/google/chrome/google-chrome Operating System: Ubuntu 10.4 64 bit.

    Read the article

  • Transmission dependencies are not in repository

    - by chocobai
    I'm running Ubuntu 12.04 using Gnome3 through their ppa in launchpad. Went good until now. Today Ubuntu wanted to make some updates and I thought okay. But it didn't want to install all of them. Turned out there were not all dependencies in the ppa. Before I noticed that, I (noob :D) uninstalled (apt-get purge) Transmission in order to reinstall it. Bad Idea, because now I can't install it, even using synaptics. The problem: It seems like the only ppas that have transmission in it are the one from gnome3 team (not all packages included according to synaptics, v2.71) and the official (transmission-common missing, v2.61). So when I try to install a package it says that transmission-common is too new. I can't even find the version that should be somewhere in the official standard Ubuntu ppa. Installing from the Software center doesn't work either. Why aren't all dependencies in the ppas or why can't I see them? How can I install Transmission (stable, newest version) again? And why has the gnome3 team a newer version as the stable ppa of transmission? Are they including beta software? If you need any additional information just tell me. Sorry I think it's quiet confusing what I did there. Thanks in advance. EDIT1 Okay sorry, I should have explained better. When I try to install it tells me something of dependency problems. When I try sudo apt-get install ... it says: Die folgenden Pakete haben unerfüllte Abhängigkeiten: transmission-cli : Hängt ab von: transmission-common (= 2.61-0ubuntu0.12.04.1) aber 2.71-0ubuntu1~precise1 soll installiert werden transmission-daemon : Hängt ab von: transmission-common (= 2.61-0ubuntu0.12.04.1) aber 2.71-0ubuntu1~precise1 soll installiert werden transmission-gtk : Hängt ab von: transmission-common (= 2.61-0ubuntu0.12.04.1) aber 2.71-0ubuntu1~precise1 soll installiert werden E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete. Unfortunately I'm using Ubuntu in German.

    Read the article

  • What is an effective git process for managing our central code library?

    - by Mathew Byrne
    Quick background: we're a small web agency (3-6 developers at any one time) developing small to medium sized Symfony 1.4 sites. We've used git for a year now, but most of our developers have preferred Subversion and aren't used to a distributed model. For the past 6 months we've put a lot of development time into a central Symfony plugin that powers our custom CMS. This plugin includes a number of features, helpers, base classes etc. that we use to build custom functionality. This plugin is stored in git, but branches wildly as the plugin is used in various products and is pulled from/pushed to constantly. The repository is usually used as a submodule within a major project. The problems we're starting to see now are a large number of Merge conflicts and backwards incompatible changes brought into the repository by developers adding custom functionality in the context of their own project. I've read Vincent Driessen's excellent git branching model and successfully used it for projects in the past, but it doesn't seem to quite apply well to our particular situation; we have a number of projects concurrently using the same core plugin while developing new features for it. What we need is a strategy that provides the following: A methodology for developing major features within the code repository. A way of migrating those features into other projects. A way of versioning the core repository, and of tracking which version each major project uses. A plan for migrating bug fixes back to older versions. A cleaner history that's easier to see where changes have come from. Any suggestions or discussion would be greatly appreciated.

    Read the article

  • Tweaks on nvidia-settings only working when the program is opened

    - by Igoru
    I have two monitors. The master one (17") is 1yo, and the secondary (15") is really old, like 4yo. This old screen is having problems displaying colors... They are a little bit darker, what is a problem when I'm viewing pics. I have a GeForce 9800, so I changed some settings inside nvidia-settings, that fit better with this second screen. But those settings just are applied when I first open nvidia-settings. First time I configured this, it worked. I turned off computer, next day turned it on, and screen is dark again. As soon as I open nvidia-settings again, the screens get lighter again! How can I make those settings permanent and loaded at startup?

    Read the article

  • Loading a new instance of a class through XML not working quite right

    - by Thegluestickman
    I'm having trouble with XML and XNA. I want to be able to load weapon settings through XML to make my weapons easier to make and to have less code in the actual project file. So I started out making a basic XML document, something to just assign variables with. But no matter what I changed it gave me a new error every time. The code below gives me a "XML element 'Tag' not found", I added and it started to say the variables weren't found. What I wanted to do in the XML file as well, was load a texture for the file too. So I created a static class to hold my texture values, then in the Texture tag of my XML document I would set it to that instance too. I think that's were the problems are occuring because that's where the "XML element 'Tag' not found" error is pointing me too. My XML document: <XnaContent> <Asset Type="ConversationEngine.Weapon"> <weaponStrength>0</weaponStrength> <damageModifiers>0</damageModifiers> <speed>0</speed> <magicDefense>0</magicDefense> <description>0</description> <identifier>0</identifier> <weaponTexture>LoadWeaponTextures.ironSword</weaponTexture> </Asset> </XnaContent> My Class to load the weapon XML: public static class LoadWeaponXML { static Weapon Weapons; public static Weapon WeaponLoad(ContentManager content, int id) { Weapons = content.Load<Weapon>(@"Weapons/" + id); return Weapons; } } public static class LoadWeaponTextures { public static Texture2D ironSword; public static void TextureLoad(ContentManager content) { ironSword = content.Load<Texture2D>("Sword"); } } I'm not entirely sure if you can load textures through XML, but any help would be greatly appreciated.

    Read the article

  • Connection timeout when accessing Github

    - by Felipe Micaroni Lalli
    I have exactly the same problem as described here: http://stackoverflow.com/questions/12849986/connection-timeout-when-accessing-github So I'll just copy & paste: I have some weird problems. When I try to log in my Github account, I get a "net::ERR_EMPTY_RESPONSE" error. I tried with Chrome, Firefox and Opera. In Firefox, if a clean the cache and offline data, it works for a while. Then I can log in, but I still can't create a Github repository, even if I clear the cache again. My friend, in the same network, with Windows, can do whatever he wants on Github's web site, but I can't. I tried many DNS servers, I tried not to set it (my friend doesn't), but it's still not working. My OS: Ubuntu x64 12.04 Ideas, please. And thanks. Also, I can clone any repo but I can't push. I had to change to https://codeplane.com/ due to this problem, but I want to understand why it happens. EDIT: I could clone one repo, but the other one just hangs at this point: felipelalli@felipelalli-Studio-XPS-8100:~/wa$ git clone [email protected]:felipelalli/micaroni.git Cloning into 'micaroni'... remote: Counting objects: 5238, done. remote: Compressing objects: 100% (3257/3257), done. Receiving objects: 92% (4839/5238), 43.29 MiB | 902 KiB/s

    Read the article

  • Virtual guest does not have network access in cafe.

    - by blee
    My Virtualbox guest OS (Ubuntu on ubuntu host) does not connect to the internet when I have wifi access through an internet cafe system. By this, I mean where your browser redirects to an internal web page where you can enter a code. On the guest, I can successfully connect to the virtual network adapter, but I do not get internet access, nor a redirect to the internal web page. I use OpenDNS for the host. I have no problems when connecting through ethernet or regular wifi. Can someone tell me any of: 1) How to fix the problem. 2) How such cafe systems work. 3) At least point me to a technical explanation of such a cafe system so I can begin to troubleshoot. Thanks!

    Read the article

  • Smart defaults [SSDT]

    - by jamiet
    I’ve just discovered a new, somewhat hidden, feature in SSDT that I didn’t know about and figured it would be worth highlighting here because I’ll bet not many others know it either; the feature is called Smart Defaults. It gets around the problem of adding a NOT NULLable column to an existing table that has got data in it – previous to SSDT you would need to define a DEFAULT constraint however it does feel rather cumbersome to create an object purely for the purpose of pushing through a deployment – that’s the situation that Smart Defaults is meant to alleviate. The Smart Defaults option exists in the advanced section of a Publish Profile file: The description of the setting is “Automatically provides a default value when updating a table that contains data with a column that does not allow null values”, in other words checking that option will cause SSDT to insert an arbitrary default value into your newly created NON NULLable column. In case you’re wondering how it does it, here’s how: SSDT creates a DEFAULT CONSTRAINT at the same time as the column is created and then immediately removes that constraint: ALTER TABLE [dbo].[T1]    ADD [C1] INT NOT NULL,         CONSTRAINT [SD_T1_1df7a5f76cf44bb593506d05ff9a1e2b] DEFAULT 0 FOR [C1];ALTER TABLE [dbo].[T1] DROP CONSTRAINT [SD_T1_1df7a5f76cf44bb593506d05ff9a1e2b]; You can then update the value as appropriate in a Post-Deployment script. Pretty cool! On the downside, you can only specify this option for the whole project, not for an individual table or even an individual column – I’m not sure that I’d want to turn this on for an entire project as it could hide problems that a failed deployment would highlight, in other words smart defaults could be seen to be “papering over the cracks”. If you think that should be improved go and vote (and leave a comment) at [SSDT] Allow us to specify Smart defaults per table or even per column. @Jamiet

    Read the article

  • Name Servers changed over 48 hrs ago and site is still down

    - by Solomon Closson
    Ok, I just recently changed Name Servers for my site (Oct. 29th): http://dream-portal.net but there is an issue, the name servers were changed from godaddy, however, the DNS is being hosted elsewhere. Godaddy states that the DNS is resolving the site to www.dream-portal.net and that is making it inaccessible from the DNS on the other host and that they can't do anything because I'm not hosting DNS with godaddy. I've contacted the other host and they say that everything is fine, however, people are not able to access the site and I can't access it from my work computer. I can only access it from my home computer. From my work computer it says that the page can not be found. What should I do? What can I do? Other people reported problems with the site here: http://www.simplemachines.org/community/index.php?topic=487592.msg3629960#msg3629960

    Read the article

  • Google earth will not reinstall

    - by chad
    I was trying to perform the the fix found at this link http://www.omgubuntu.co.uk/2012/01/how-to-make-google-earth-look-native-in-ubuntu It requires you to delete certain files from the /opt/google/earth/free folder and then add some new ones that you download. I deleted the files but the links to download the new ones were unusable. I was using gksudo nautilus so trash was disabled meaning I could not restore the files I had deleted. I the tried to go to the Google Earth website and reinstall it. I downloaded the .deb but when I tried to install it it gav me an error message saying "cannot install ia32-libs" I tried installing this via terminal and it gave me an error message saying chad@chad-Lenovo-G570:~$ sudo apt-get install ia32-libs [sudo] password for chad: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. How do I fix this? Now I am stuck without a functioning Google Earth. How can I fix this?

    Read the article

  • WEP key not working on laptop running Ubuntu

    - by stupid-idiot
    I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

    Read the article

  • Basic video editor for AVCHD Lite files?

    - by davr
    I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

    Read the article

  • How can I permanently fix my date synchronize problem in linux?

    - by gr33d
    Ubuntu 7.10 server i386 clock/date/time won't stay in sync. Are their log files I can view to tell when the clock changes? For a temporary fix, I created a file in /etc/cron.hourly: #!/bin/sh ntpdate time.nist.gov However, this still leaves a potential hour of unchecked time. Is there a cron.minutely? That would still leave a potential minute of unchecked time. I have read about CMOS battery problems, but what if this does not fix it? I'd like to be able to troubleshoot this as a completely software problem. My squid logs are showing dates back in 2005 when the clock changes, and my time-sensitive access controls are skewed and end up allowing users to surf prohibited websites during business hours.

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >