Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 268/624 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• I can't upgrade to 12.10 Quantal Quetzal

  - by JamesTheAwesomeDude

  After hearing about some of the features in 12.10, I decided to upgrade my Ubuntu from 12.04 LTS to the newer 12.10. However, when I try to upgrade it, I start the update manager, like always, and I start the distro upgrade, just like I do every time there's a new version, but at the end of the "Setting new software channels" stage, it fails, saying: Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E: Unable to correct problems, you have held broken packages. This can be caused by: Upgrading to a pre-release version of Ubuntu Running the current pre-release version of Ubuntu Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. What should I do? I understand that I have some sort of "broken" package on my system, but how do I identify and remove the problem? Note: At the start of the "Setting new software channels" stage, I was presented with this: Third party sources disabled Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• Cross-platform distributed fault-tolerant (disconnected operation/local cache) filesystem

  - by Adrian Frühwirth

  We are facing a design "challenge" where we are required to set up a storage solution with the following properties: What we need HA a scalable storage backend offline/disconnected operation on the client to account for network outages cross-platform access client-side access from certainly Windows (probably XP upwards), possibly Linux backend integrates with AD/LDAP (permission management (user/group management, ...)) should work reasonably well over slow WAN-links Another problem is that we don't really know all possible use cases here, if people need to be able to have concurrent access to shared files or if they will only be accessing their own files, so a possible solution needs to account for concurrent access and how conflict management would look in this case from a user's point of view. This two years old blog posts sums up the impression that I have been getting during the last couple of days of research, that there are lots of current übercool projects implementing (non-Windows) clustered petabyte-capable blob-storage solutions but that there is none that supports disconnected operation nicely and natively, but I am hoping that we have missed an obvious solution. What we have tried OpenAFS We figured that we want a distributed network filesystem with a local cache and tested OpenAFS (which, as the only currently "stable" DFS supporting disconnected operation, seemed the way to go) for a week but there are several problems with it: it's a real pain to set up there are no official RHEL/CentOS packages the package of the current stable version 1.6.5.1 from elrepo randomly kernel panics on fresh installs, this is an absolute no-go Windows support (including the required Kerberos packages) is mystical. The current client for the 1.6 branch does not run on Windows 8, the current client for the 1.7 does but it just randomly crashes. After that experience we didn't even bother testing on XP and Windows 7. Suffice to say, we couldn't get it working and the whole setup has been so unstable and complicated to setup that it's just not an option for production. Samba + Unison Since OpenAFS was a complete disaster and no other DFS seems to support disconnected operation we went for a simpler idea that would sync files against a Samba server using Unison. This has the following advantages: Samba integrates with ADs; it's a pain but can be done. Samba solves the problem of remotely accessing the storage from Windows but introduces another SPOF and does not address the actual storage problem. We could probably stick any clustered FS underneath Samba, but that means we need a HA Samba setup on top of that to maintain HA which probably adds a lot of additional complexity. I vaguely remember trying to implement redundancy with Samba before and I could not silently failover between servers. Even when online, you are working with local files which will result in more conflicts than would be necessary if a local cache were only touched when disconnected It's not automatic. We cannot expect users to manually sync their files using the (functional, but not-so-pretty) GTK GUI on a regular basis. I attempted to semi-automate the process using the Windows task scheduler, but you cannot really do it in a satisfactory way. On top of that, the way Unison works makes syncing against Samba a costly operation, so I am afraid that it just doesn't scale very well or even at all. Samba + "Offline Files" After that we became a little desparate and gave Windows "offline files" a chance. We figured that having something that is inbuilt into the OS would reduce administrative efforts, helps blaming someone else when it's not working properly and should just work since people have been using this for years. Right? Wrong. We really wanted it to work, but it just doesn't. 30 minutes of copying files around and unplugging network cables/disabling network interfaces left us with (silent! there is only a tiny notification in Windows explorer in the statusbar, which doesn't even open Sync Center if you click on it!) undeletable files on the server (!) and conflicts that should not even be conflicts. In the end, we had one successful sync of a tiny text file, everything else just exploded horribly. Beyond that, there are other problems: Microsoft admits that "offline files" in Windows XP cannot cope with "large files" and therefore does not cache/sync them at all which would mean those files become unavailable if the connection drop In Windows 7 the feature is only available in the Professional/Ultimate/Enterprise editions. Summary Unless there is another fault-tolerant DFS that supports Windows natively I assume that stacking a HA Samba cluster on top of something like GlusterFS/Lustre/whatnot is the only option, but I hope that I am wrong here. How do other companies allow fault-tolerant network access to redundant storage in a heterogeneous environment with Windows?

  Read the article

• How do developers verify that software requirement changes in one system do not violate a requirement of downstream software systems?

  - by Peter Smith

  In my work, I do requirements gathering, analysis and design of business solutions in addition to coding. There are multiple software systems and packages, and developers are expected to work on any of them, instead of being assigned to make changes to only 1 system or just a few systems. How developers ensure they have captured all of the necessary requirements and resolved any conflicting requirements? An example of this type of scenario: Bob the developer is asked to modify the problem ticket system for a hypothetical utility repair business. They contract with a local utility company to provide this service. The old system provides a mechanism for an external customer to create a ticket indicating a problem with utility service at a particular address. There is a scheduling system and an invoicing system that is dependent on this data. Bob's new project is to modify the ticket placement system to allow for multiple addresses to entered by a landlord or other end customer with multiple properties. The invoicing system bills per ticket, but should be modified to bill per address. What practices would help Bob discover that the invoicing system needs to be changed as well? How might Bob discover what other systems in his company might need to be changed in order to support the new changes\business model? Let's say there is a documented specification for each system involved, but there are many systems and Bob is not familiar with all of them. End of example. We're often in this scenario, and we do have design reviews but management places ultimate responsibility for any defects (business process or software process) on the developer who is doing the design and the work. Some organizations seem to be better at this than others. How do they manage to detect and solve conflicting or incomplete requirements across software systems? We currently have a lot of tribal knowledge and just a few developers who understand the entire business and software chain. This seems highly ineffective and leads to problems at the requirements level.

  Read the article

• How to convert rmvb to mp4? (or, why ffmpeg doesn't work?)

  - by Tom Brito

  Hi, I'm trying to use this script to convert an rmvb video to mp4, but I'm having problems with the ffmpeg. In apt-get there's only ffmpeg0 and ffmpeg-dev, I installed both, but the script doesn't work, it's saying that ffmpeg was not found. Any hint on this? --update The script I'm talking about: #!/bin/bash tipo=$1 arqv=$2 resolucao=$3 tipoarq=$4 help() { clear echo "Convertor de Vídeos para MP4" echo "Parametro 1 = Tipo: (A - Arquivo/D - Diretório)" echo "Parametro 2 = Arquivo/Caminho" echo "Parametro 3 = Resolução" echo "Parametro 4 = Tipo de Arquivos de Entrada (rmvb, avi, mpeg)" } if [ "$tipo" = "" -o "$arqv" = "" -o "$resolucao" = "" -o "$tipoarq" = "" ]; then help; exit fi if [ "$tipo" = "D" ]; then count=`ls "$arqv"/*.$tipoarq | wc -l` else count=1 fi echo "$count arquivos encontrados para converter." x=0 while [ ! $x -ge $count ]; do x=`echo $x + 1 | bc` if [ "$tipo" = "D" ]; then nome=`ls "$arqv"/*.$tipoarq | head -n $x | tail -n 1` else nome=$arqv fi echo "Convertendo $nome ..." ffmpeg -i "$nome" -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -mbd 2 -cmp 2 -subcmp 2 -s $resolucao "`echo $nome | sed "s/\.$tipoarq//g"`".mp4 done exit --update Using WinFF it gives: Unknown encoder 'libx264' I've installed both the existing packages libx264-67 and libx264-dev, but none solved. Looking for more alternatives...

  Read the article

• SQL Server: Is it possible to prevent SQL Agent from failing a step on error?

  - by franklinkj

  I have a stored procedure that runs custom backups for around 60 SQL servers (mixes 2000 through 2008R2). Occasionally, due to issues outside of my control (backup device inaccessible, network error, etc.) an individual backup on one or two databases will fail. This causes this entire step to fail, which means any subsequent backup commands are not executed and half of the databases on a given server may not be backed up. On the 2005+ boxes I am using TRY/CATCH blocks to manage these problems and continue backing up the remaining databases. On a 2000 server however, for example, I have no way to prevent this error from failing the entire step: Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'db-diff(\PATH\DB-DIFF-03-16-2010.DIF)'. Operating system error 5(Access is denied.). Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally. I am simply asking if anything like this is possible in SQL 2000 or if I need to go in a completely different direction.

  Read the article

• How can I set up sendmail to forward all mail to an external MTA?

  - by unknown (google)

  We have multiple applications that currently talk SMTP to an external MTA. The emails have arbitrary destination domains (they're emails to be sent to our users), but all from the same internal domain ([email protected]). I want to set up an internal MTA (i guess with sendmail) that queues all mails, and have the internal MTA forward these emails to the external MTA, because the external MTA occasionally goes down and this causes various problems in our applications. I figure I can set up sendmail as a queuing middleware. If the above assumptions are correct, what would the sendmail configuration look like? The 'mailertable' feature looks promising, and so does 'SMART_HOST'. Any thoughts before I explore these possibilities? Jae

  Read the article

• VPN/AFP server for centralized TimeMachine backups

  - by Keith Johnson

  I am a sysadmin for a small group of about 7 people who prefer Apple machines for their work. These machines are currently either a) not backed up at all, or b) backed up using Retrospect(Which I'm not very fond of). I don't really have the budget for anything fancy, and I'd like to keep it as user friendly as possible. Ideally I am thinking of a VPN server they can connect to(to keep the traffic secure, and because they work from home frequently) along with an AFP server for use with TimeMachine. The goal would be to get better backup coverage, along with user-initiated restores and overall ease of use. Does this seem like a reasonable idea? Has anyone done this before? Are there any obvious problems I've overlooked?

  Read the article

• A story from SQLvdb and Idera

  - by Peter Larsson

  A year or so back, I struggled with some consistency problems so I figured out I needed a way to "mount" backup files as a virtual database. At the time (SQL Server 2005 and SQL Server 2008) my choice fell on Idera's SQLvdb because it felt easy enough to use. I used it a few times and it worked great. Some time later we upgraded to SQL Server 2008R2 and I didn't use SQLvbd for a long time. Until yesterday... I was upset that suddenly SQLvbd took more than 2 hours to mount the backup file (if it succeeded at all). I uninstalled the application and went for lunch. After lunch, I decided to give SQLvbd another chance so I emailed their tech support and got a response within 30 minutes or so. Now, since I am a SQL Server MVP, they gave me another serial number than my first and I downloaded and installed a newer version. But also this version was really slow. I emailed back to them with the additional information they requested and to my surprise I had got an email this morning when I came back to work, where Idera explained some of the issues (bugs) and asked my to test a newer version. I did, and now a fresh mount of a 100GB database (compressed to 20GB with native compression) located on our SAN takes less than 6 minutes! Thank you. //Peter

  Read the article

• Math questions at a programmer interview?

  - by anon

  So I went to an interview at Samsung here in Dallas, Texas. The way the recruiter described the job, he didn't make it sound like it was too math-oriented. The job basically involved graphics programming and C++. Yes, math is implied in graphics programming, especially shaders, but I still wasn't expecting this... The whole interview lasted about an hour and a half and they asked me nothing but math-related questions. They didn't ask me a single programming question, which I found odd. About all they did was ask me how to write certain math routines as a C++ function, but that's about it. What about programming philosophy questions? Design patterns? Code-correctness? Constness? Exception safety? Thread safety? There are a zillion topics that they could have covered. But they didn't. The main concern I have is that they didn't ask any programming questions. This basically implies to me that any programmer who is good at math can get a job here, but they might put out terrible code. Of course, I think I bombed the interview because I haven't used any sort of linear algebra in about a year and I forget math easily if I haven't used it in practice for a while. Are any of my other fellow programmers out there this way? I'm a game programmer too, so this seems especially odd. The more I learn, the more old knowledge that gets "popped" out of my "stack" (memory). My question is: Does this interview seem suspicious? Is this a typical interview that large corporations have? During the interview they told me that Google's interview process is similar. They have multiple, consecutive interviews where the math problems get more advanced.

  Read the article

• Slick2D + LWJGL collision system

  - by Connor W

  So I've been learning java for a while and have explored slick and lwjgl before but went away from using Slick for a while. But I've recently gone back to using it (as I'm making a platformer and Tiled will be really helpful). But here's where my problems begin: collision. I have a player polygon and I check to see if it's colliding with my tiled map with this method: public static boolean playerCollisionWith() { for(int i = 0; i < Blockmap.entities.size(); i++) { Block entity1 = (Block) Blockmap.entities.get(i); if(playerPoly.intersects(entity1.poly)) { return true; } } return false; } This would work normally but I'm using a different method for movement. Instead of just adding a speed variable to the player's x axis. I move like this: if(Keyboard.isKeyDown(Keyboard.KEY_RIGHT)) { speedX = Math.min(5, speedX + 1); moving = true; playerPoly.setX(x); if(playerCollisionWith()) { speedX = -5; playerPoly.setX(x); } } That Math.min call is what is messing me up =. I can't just call speedX = -5, because when I do the player "bounces" when the right mouse button is down and it's colliding. Bounces as in flashes back and forth REALLY quickly. But I don't really know how I would make it so that collisions on the y axis would work either, whether the player is jumping or not. So if I could get some help with how to fix this problem that would be great. Thank you for the help!

  Read the article

• SSH onto Ubuntu box using RSA keys

  - by jex

  I recently installed OpenSSH on one of my Ubuntu machines and I've been running into problems getting it to use RSA keys. I've generated the RSA key on the client (ssh-keygen), and appended the public key generated to both the /home/jex/.ssh/authorized_keys and /etc/ssh/authorized_keys files on the server. However, when I try to login (ssh -o PreferredAuthorizations=publickey jex@host -v [which forces the use of public key for login]) I get the following output: debug1: Host 'pentheon.local' is known and matches the RSA host key. debug1: Found key in /home/jex/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received Banner message debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/jex/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /home/jex/.ssh/identity debug1: Trying private key: /home/jex/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,keyboard-interactive). I'm not entirely sure where I've gone wrong. I am willing to post my /etc/ssh/sshd_config if needed.

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• A specific user is unable to log in to vsftpd

  - by HackToHell

  I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS ********** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

  Read the article

• Best CMS to handle short snippets of text?

  - by Federico Poloni

  I have to install a CMS to manage a set of mathematical problems, i.e., our main content will be short (~3 lines) snippets of text. We need the ability to add comments and categories/tags, possibly with a powerful search function combining different constraints on the categories. A crucial ability is the possibility to combine the results of a search in the same page to produce a (printable) problem sheet: not many CMS's seem to be able to do so, and it is difficult for me to test every one for this specific function. Do you guys know of a CMS that is capable to return formatted search result in this fashion? Thanks in advance!

  Read the article

• Bitbucket SSH and iptables

  - by Astaz3l

  I'm a newbie in iptables to be honest. I have some basic rules. Everything is blocked by default. iptables -t filter -F iptables -t filter -X iptables -t filter -P INPUT DROP iptables -t filter -P FORWARD DROP iptables -t filter -P OUTPUT DROP iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT ...some rules for http, ftp etc... iptables -t filter -A OUTPUT -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -t filter -A INPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT With the last two lines i'm trying to open the access for ssh so i can connect to bitbucket. When i try to connect to bitbucket: ssh -Tv [email protected] I got the error - connection timed out. But when I disable iptables i can connect without any problems. What am i missing? Should I add any additional rules?

  Read the article

• Pinning Google Chrome's "Application Shortcuts" to the Windows 7 Taskbar

  - by Humphrey

  I love the idea behind Google Chromes Application Shortcuts, but they don't integrate well for me into the Windows 7 taskbar. Ideally, I'd like to be able to have my most used webpages (gmail, calendar, etc) as separate windows, pinned to the Windows 7 taskbar. I've created some application shortcuts on my desktop, but I've come across the following problems. If I open my gmail application shortcut, and then later on open a normal chrome window the new window will also use the gmail icon in the taskbar, even if that window has nothing to do with gmail. (What's weirder, is that this new window then uses a high-res gmail icon, but my actually application shortcut window uses a low-res icon. If I pin the application shortcut to the taskbar, then the icon turns into the regular chrome icon. Any idea's how to fix these issues? Or are they bugs in google chrome? Chrome version: 4.0.249.89

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

• NTFS partitions mount as root instead of user as set in /etc/fstab

  - by G1bs0n

  I recently upgraded a server to Ubuntu 12.04 with a fresh install and my NTFS partitions won't mount as user at boot but I can mount them as user manually from the console with $ sudo mount -a. Using ntfsfix reports no problems and chkdisk sees nothing wrong under Windows 7. Are the drives not ready to be mounted at boot and default to root instead of user for some reason? Here is my /etc/fstab: UUID=E4E6B30CE6B2DDCC /media/Bowles ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=A040C42340C3FDD2 /media/Burroughs ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=EA022C73022C46C3 /media/DoctorGonzo ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=BA425A384259FA19 /media/Geist ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=E87CFAE57CFAAE06 /media/DouglasAdams ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 Here is the output of ls -l after boot: drwxr-xr-x 1 xbmc xbmc 4096 Oct 31 21:46 Bowles drwxrwxr-x 1 root users 8192 Oct 31 21:46 Burroughs drwxrwxr-x 1 root users 4096 Oct 28 21:45 DoctorGonzo drwxrwxr-x 1 root users 12288 Oct 31 19:56 DouglasAdams drwxrwxr-x 1 root users 4096 Nov 3 01:03 Geist If I unmount and mount again with $ sudo mount -a from console, the output of ls -l: drwxr-xr-x 1 xbmc xbmc 4096 Oct 31 21:46 Bowles drwxr-xr-x 1 xbmc xbmc 8192 Oct 31 21:46 Burroughs drwxr-xr-x 1 xbmc xbmc 4096 Oct 28 21:45 DoctorGonzo drwxr-xr-x 1 xbmc xbmc 12288 Oct 31 19:56 DouglasAdams drwxr-xr-x 1 xbmc xbmc 4096 Nov 3 01:03 Geist Update I was fooling myself, I had a custom udev rule set up to auto-mount file systems by label for USB drives, borrowed from here, but didn't update the rule to accommodate for my additional hard drives. Updating the rule to auto-mount only drives after /dev/sde solved my problem. Thank you again for your reply cartoonist.

  Read the article

• debian/rules error "No rule to make target"

  - by Hairo

  i'm having some problems creating a .deb file with debuild before reading some tutorials i managed to make the file but i always get this error: make: *** No rule to make target «build». Stop. dpkg-buildpackage: failure: debian/rules build gave error exit status 2 debuild: fatal error at line 1329: dpkg-buildpackage -rfakeroot -D -us -uc -b failed Any help?? This is my debian rules file: #!/usr/bin/make -f # -*- makefile -*- # Sample debian/rules that uses debhelper. # This file was originally written by Joey Hess and Craig Small. # As a special exception, when this file is copied by dh-make into a # dh-make output file, you may use that output file without restriction. # This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 build-stamp: configure-stamp dh_testdir touch build-stamp clean: dh_testdir dh_testroot rm -f build-stamp configure-stamp dh_clean install: build dh_testdir dh_testroot dh_clean -k dh_installdirs $(MAKE) install DESTDIR=$(CURDIR)/debian/pycounter mkdir -p $(CURDIR)/debian/pycounter # Copy .py files cp pycounter.py $(CURDIR)/debian/pycounter/opt/extras.ubuntu.com/pycounter/pycounter.py cp prefs.py $(CURDIR)/debian/pycounter/opt/extras.ubuntu.com/pycounter/prefs.py # desktop copyright and others (not complete, check) cp extras-pycounter.desktop $(CURDIR)/debian/pycounter/usr/share/applications/extras-pycounter.desktop

  Read the article

• How to avoid tilde ~ in Bash prompt?

  - by Jirka

  Hello! I have set my prompt in bash in a such way that I can use it directly in scp command: My current PS1 string: PS1="\h:\w\n$" And the prompt looks like this: lnx-hladky:/tmp/plugtmp $ What I don't like at all is the fact that $HOME directory is displayed as tilde. Can this be avoided? It's causing problems when switching between different users. Example: lnx-hladky:~/DOC $ Documentation says: \w : the current working directory, with $HOME abbreviated with a tilde \W: the basename of the current working directory, with $HOME abbreviated with a tilde Is there any possibility to avoid $HOME being abbreviated with a tilde? I have found one way around but I feel like it's overcomplicated: PROMPT_COMMAND='echo -ne "\e[4;35m$(date +%T)\e[24m$(whoami)@$(hostname):$(pwd)\e[m\n"' PS1=$ Can anyone propose a better solution? I have a feeling it's not quite OK to run so many commands just to get prompt. (date,whoami,hostname,pwd). Thanks a lot! Jirka

  Read the article

• Knowing 11i HRMS Family Pack K Rollup 5

  - by Robert Story

  Upcoming WebcastTitle: Knowing 11i HRMS Family Pack K Rollup 5Date: 20-Apr-2010  and  27-Apr-2010Time: 11:00 AM EST / 8:00 AM PST / 8:30 PM IST  Product Family: EBS HRMSSummaryThe webcast will focus on providing customers with essential information to ensure the smooth and successful installation of 11i HRMS Family Pack K Rollup 5. All the critical 11i HRMS Family Pack K Rollup 5 information such as prerequisites and known issues will be discussed in the webcast. A close review on common patching and installation problems including frequently asked questions and regularly encountered errors are also included.Details: Session 1Date and Time 20-Apr-2010 11:00 AMTimezone (UTC-05:00) US Eastern TimeDuration 1 HourRegister for this sessionDetails: Session 2Date and Time 27-Apr-2010 6:00 AMTimezone (UTC-05:00) US Eastern TimeDuration 1 HourRegister for this sessionDetails: Session 3Date and Time 27-Apr-2010 7:00 PMTimezone (UTC-05:00) US Eastern TimeDuration 1 HourRegister for this session....... ....... ....... ....... ....... ....... .......The above webcast is a service of the E-Business Suite Communities in My Oracle Support.For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Get cryptic error when trying to create a snapshot of any of my VMs

  - by Zolt

  I'm using Oracle VM VirtualBox. I have 6 VMs that I've imported. When I click on an individual VM, and then click the camera image (or Ctrl+Shift+S) to take a snapshot, the snapshot process fails and VirtualBox gives the following error: Failed to create a snapshot of the virtual machine vmName. Details: Result Code: VBOX_E_IPRT_ERROR (0x80BB0005) This happens not only for one of my VMs, but all of them, if I try to take a snapshot of each one separately, one at a time. My computer is a Windows 7 machine. I have 200 GB free on my hard drive, and I see no reason why the error should occur. I can import VMs, run them, and clone then without any problems. Can anyone tell me what to do to fix the issue?

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >