Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 263/303 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• How can I change the binding order of network adapters in Windows 7?

  - by Chris Farmer

  The end goal here is that I am trying to install an Oracle 10g server on my Windows 7 x64 dev box. I use DHCP, and the Oracle installer is throwing up this warning: Checking Network Configuration requirements ... Check complete. The overall result of this check is: Failed <<<< Problem: The install has detected that the primary IP address of the system is DHCP-assigned. Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP. I have installed the loopback adapter, but I am not sure how to make it the primary network adapter. I see this Microsoft KB article on the subject but it's Windows XP-oriented, and I can't seem to find a comparable one for Windows 7. Some of the options it talks about don't seem to be present in the views of the adapters that I see. So, how can I make the loopback adapter become the primary adapter?

  Read the article

• Aging SBS needs updates / Thoughts for one-off, off-line complete backup?

  - by tcv

  Hey guys, So, we checked out the status of an SBS 2003 at one of our more recent, spend-averse clients and found it to be woefully out-of-date. Scary out of date. I think it's running IE2. Ok, maybe not that far back. Anyway, I was thinking that I could use some kind of disk-imaging software to image the four IDE drives within and, in the event the server gets some kind of Update Induced Indigestion, I could completely restore. Usually my go-to software for this is Acronis, but my client will likely balk at a $500 price tag for a one-off backup with their server product. I had thought we could use the boot media from, say, Backup & Recovery 10 to take an off-line image of all the drives. According to their CHAT tech support, however, it will not work. I pressed for the technical reasons and they said they'd email me. They haven't emailed me. They still might. This server is running SBS 2003, pre sp2. It's got four IDE disks. One is a Basic disk, which contains the O/S. The others are bound as a dynamic disk. You might ask: "Don't they already have backup software?" They do! Backup Exec, a very low-end version that won't even do VSS. I don't know much about BE, but it seems to me that if the worst were to happen, it would mean building a new server O/S, installing BE (if the media is available), then restoring. Would it even work? I can take the system down for hours to do a backup and my goal here is a pretty dead-simple restore if the worst happens. Any and all suggestions are exciting. m

  Read the article

• Setting up a global MySQL Cluster in the cloud

  - by GregB

  I'm giving the question an overhaul to more specifically identify where I need help. I use two tools to manage a bunch of cloud server: Puppet and Rundeck. Both of these can be configured to use a mysql backend. I'd like to setup an instance of each application in both the U.S., and the U.K., treating the U.K. servers as hot stand-bys in case of failure in the U.S. I want to use a MySql cluster so that the data is automatically replicated from the U.S. to the U.K. Because these are hot standbys, high performance is not a goal. Redundancy and data integrity are most important. My question revolves around the setup of the mysql cluster. I want to run three servers, each one running a data node, a sql node, and a management node. Is this a valid configuration for mysql server? If so, could someone point me in the right direction for creating such a setup? I've downloaded the offical tarball, and the official debian, and the documentation for them contradicts many of the online tutorials. I'm installing on Ubuntu 10.04.

  Read the article

• How to verify system using right GPU, after system reset [duplicate]

  - by Antoros

  This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

  Read the article

• Upgrading PHP, MySQL old-passwords issue

  - by Rushyo

  I've inherited a Windows 2k3 server running an XAMPP-installation from the stone age. I needed to upgrade PHP to facilitate an upgrade to MediaWiki to facilitate a new MediaWiki extension (to facilitate some documentation to facilitate doing my job to facilitate getting paid to facilit... you get the idea). However... installing a new version of PHP resulted in PHP's MySQL libraries refusing to communicate using MySQL's 'old style' 152-bit passwords. Not a problem in theory. The MySQL installation is post-4.1, so it should have the functionality to upgrade the user's passwords from 152-bit to 328-bit (what a weird hashing algorithm...). I ran the following: SET PASSWORD = PASSWORD('foo'); on MySQL but querying: SELECT user, password FROM mysql.user; returned just the same password I started out with - 152-bit. Now... I suspect you're thinking 'AHA! old-passwords is on!'. Unfortunately it's not - I've disabled it in the configuration (explicitly set it to 0), made doubly sure I have an absolute reference to that configuration file and ensured the service isn't using the --old-passwords flag. The service was reset after each and every operation. So I went onto another system and generated the 328-bit hash on there, copying the hash over to the first MySQL instance. Unfortunately, that didn't work either (I did remember to FLUSH PRIVILEGES). The application error is: "'mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool [...snip...] Is there anything else I can try to get PHP to recognise MySQL as not using the 'old insecure authentication'? MySQL seems to be stuck in 'old-passwords' mode and I can't get it out of it.

  Read the article

• Why is there no /usr/bin/ in windows? Would it be dangerous to the entire Program Files to the path?

  - by dotancohen

  I am a Linux user spending some time in Windows and I'm trying to understand some of the Windows paradigms instead of fighting them. I notice that each program installed in the traditional manner (i.e. via orgasmic installers: Yes, Yes, Yes, Finish) adds the executables to C:/Program Files/foo/bar.exe and then adds a shortcut to the Desktop / Start Menu containing the entire path. However, there is no common directory with links to the software, i.e. C:/bin/bar.exe which would link to C:/Program Files/foo/bar.exe. Therefore, after installing an application the only way to use the application is via the clicky-clicky menus or by navigating to the executable in the filesystem. One cannot simply Win-R to open the run dialogue and then type bar or bar.exe as is possible with notepad or mspaint. I realize that Windows 8 improves on this with the otherwise horrendous Start Screen which does support typing the name of the app, but again this depends on the app having registered itself for such. Would I be doing any harm by adding C:/Program Files recursively to the Windows path? I do realize that there will be name collisions (i.e. uninstall.exe) but could there be other issues?

  Read the article

• How can I boot from .iso images stored on the harddrive ?

  - by user29701

  I want to put a .iso file of a bootable linux CD on the harddrive of my computer. I want to have it boot using grub (or lilo), and have it boot from the .iso file as if the .iso was a real CD in the CDROM drive. Here is a page that makes reference to doing this, but instead of a .iso file it is a .img file of a floppy or a whole harddisk installation: http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos%5Ftutorial That page makes reference to "cdrom emulation is not supported", but I don't know if it is not supported in grub, or if what want to do is completely impossible. Apparently Epidemic Linux (and maybe Knoppix ?) have a "bootfrom" parameter: "Using the parameter “bootfrom=/partition/path” you can start Epidemic from an ISO image located anywhere on the HD without having to create a DVD. This is very handy for testing the system." (From www.epidemiclinux.org/ ) Drew P.S. I am NOT interested in installing the CD on the harddrive. If I could have a dozen .iso's on the harddrive, I would like to be able to select them from grub and boot each of them.

  Read the article

• Very Slow DSL (ethernet) speed [New Interesting Update]

  - by Abhijit

  Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

  Read the article

• Server 2003 and SSL Certificates

  - by Keith Stokes

  I have a Windows 2000 domain with dozens of Windows 2000 servers and a few 2003 servers. Each server runs a custom app talking to a 3rd party utilizing self-signed certificates. To help troubleshooting we've created a custom test app. The 2000 servers are able to talk within seconds. The 2003 servers take anywhere from 10-30 seconds using a domain account and much less, usually under 5 seconds using a local account. The only exception to the local account performance is a new account, which is slow initially then faster. If you leave the test app open and reconnect repeatedly it talks in seconds. If you leave it open for sometime between 1 and 2 hours, it reverts back to the previous 10 seconds, so obviously something is caching. Installing the destination certificates in the local 2003 server store makes no difference. I've installed the certificates in AD and that apparently makes domain accounts work in 9-12 seconds, vs 30 seconds that was regular before. Manually clearing the certificate store on the 2003 server makes no difference. I'm at a loss as to where the certs might be cached and if I'm using some sort of domain certificate store that's hiding from me.

  Read the article

• Host system resets (crashes) when using VMWare or VirtualBox and 64-bit guest systems

  - by sinni800

  I have been trying to install virtual systems on VMWare for a while now and encountered strange behaviour from my PC. The behaviour is as follows: On "automatic" virtualization mode it either outputs a cryptic error message (can MAYBE give later, if I can reproduce) right on startup (before even the BIOS) or it resets the complete HOST system (blackscreen, bios...) If I install a Windows XP on it it works well on "binary translation" mode. If I try installing Linux on it, in "binary translation" mode it crashes 1 or 2 seconds after I hit enter on the GRUB selection screen (after the first page of kernel messages rolled in) Using VirtualBox it crashes right in the BIOS. It gave me a Bluescreen though! 0x00000101: CLOCK_WATCHDOG_TIMEOUT: a clock interrupt was not received on a secondary processor within the allocated time interval NEWS: I tried VirtualBox again and it did not completely crash the computer this time. It gave me a critical error and a log file: http://pastebin.com/yKZSDs91 In conclusion, it will crash instantly if VT-x is activated. If not, it seemingly only crashed if I try to install something with 64 bits. Another update: Yes, it ONLY crashes when the guest is 64 bit! What I tried: Reinstalling Windows (my Windows installation was quite broken so it seemed natural. Didn't work though.) New BIOS What I am certain of: Virtualization extensions are activated in the BIOS What my computer specs are: ASUS P8P67 LE mainboard, newest BIOS/EFI firmware Intel Core i5 2500k Ati Radeon HD 5770 16 GB Corsair 1333mhz DDR3 RAM, 4 X 4 GB

  Read the article

• Cannot write to directory after taking ownership

  - by jeff charles

  I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

  Read the article

• Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

  - by DOTang

  I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

  Read the article

• Adjust output Brightness/Gamma/Colors in Gnome

  - by Mikee

  We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

  Read the article

• ASUS laptop doesn't charge/use the battery after reinstalling Windows 7

  - by Stan

  I've done a clean install of Windows 7 x64 on an ASUS X501A laptop. The battery is detected and shows in the system tray as "plugged in, charging". However the charge level stays at 76% and if the AC cord is plugged out the laptop turns off. The laptop does not turn on without being plugged in either. Everything worked perfectly prior to reinstall. I've tried: Downloading and installing all the ASUS drivers, including the ATK ACPI driver Checking the BIOS - there do not seem to be any battery-related settings Flashing the BIOS to the latest version Uninstalling Microsoft ACPI-Compliant Control Method Battery in device manager as suggested on the internet Full power discharge/ATX reset as suggested by ASUS support: remove mains power charger, remove battery, press and hold power button for 10 seconds, reconnect battery and mains and turn on I have a feeling all this may have something to do with the EFI BIOS that comes on the laptop. During the reinstall I had to delete all partitions and start anew, because the Windows installer complained about the improper order of GPT partitions. The EFI System Partition was recreated by the installer, and I am guessing that it may be missing the particular ACPI driver needed to make the battery work. I've tried researching this, but could not come up with any useful info. I am hoping someone here may know a bit more about this and maybe help me understand what's going on and how to fix it. Barring that, I'll have to re-image the drive off an identical ASUS laptop with stock install and hope it fixes things.

  Read the article

• Windows 8 preinstall downgrade to Win 7: UEFI problems :/

  - by Tim Flemming

  I have a friend who has a Hp Laptop with UEFI booting. He locked himself out of windows 8 (forgot his password)... so he called me. Well after trying to use the latest version of chntpw in UBCD5.2.6, i came to the conclusion i needed to wipe the drive and install windows 7. A little googling suggested using certain versions of chntpw, but i decided to not waste the time burning endless CDs. Anyway, He agreed to installing Win7 "I hate the big tile thingys". So i attacked with Gparted. Wiped the whole drive. Set flags to boot. Set part table as MBR. However upon trying to install win7, it still claimed i had a GPT style disk. unable to install. the only thing i can think of I'm doing wrong is not changing the bios/UEFI to legacy... My question is, If I enable legacy, somehow get the drive to actually be MBR, and use my X86 DVD, should I be good? Is there some common glitches ppl miss when dealing with GPT/EFI/UEFI? I need answers cuz he now has a blank laptop which I am responsible for. Another question. windows 8 came installed on a GPT disk. SO WHY WHEN I BOOT THE INSTALL DVD DOES IT SAY IT CANT INSTALL TO A GPT STYLE DISK??? WTF??? talk about the bleeding edge man.

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• Random keyboard malfunction - happens in Vista and XP

  - by Stupefy101

  For some weird reason, some of my keyboard keys of my deskop are acting very strangely. I don't remember a certain time when it started and I can't recognize any pattern as to when it happens and when it doesn't. The problem occurs in Windows XP, XP Safe Mode, Vista, and Vista Safe mode (I have a dual boot system) Here's what's happening: When I push the I, K, comma, or 8 keys (notice how they are all in the same column), instead of just getting that character, I get extra characters afterwards. For example, I'll push the k key and it will print "ksfda", pushing "I" gives me "IWREQ", comma gives me ", xvcz", pushing 8 gives me "82431". There are a couple things that I have noticed: It does not happen every time I push the key It happens in all OS and applications I have tested The characters coming after the desired ones are in the same pattern (column order: 2, 4, 3, 1 from the left of the keyboard in the same row as the key pressed. Pressing "]" will sometimes give me "]t", and if done in Notepad, will bring up the "Find" dialog window I cannot seem to remember a specific time the problem started, although I have been defragging, using TuneUp Utilities + CCleaner, and installing lots of new programs lately.

  Read the article

• How to boot XBMC 10.1 ISO on USB via grub?

  - by Shi

  I am trying to boot the XBMC Live image (http://xbmc.org/download/) as ISO from USB via grub 1.98. I have a Kubuntu 11.04 image there as well already and it works using the following configuration: menuentry "Kubuntu 11.04 64bit" { loopback loop /boot/iso/kubuntu-11.04-desktop-amd64.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/kubuntu-11.04-desktop-amd64.iso noeject noprompt initrd (loop)/casper/initrd.gz } However, if I try to boot XBMC in an analogue way, I always get an error "Unable to find a medium containing a live file system". I found different approaches to install XBMC, but they all are about installing the distribution on USB, or using grub4dos, or unetbootin. I already found out that XBMC 10.1 is based on Ubuntu 10.04.2 LTS, so I tried those settings - even though they are quite similar to Kubuntu 11.04. Finally, the ISO contains a grub configuration as well in boot/grub/grub.cfg, but even with those parameters, I get the error above. My current configuration is the following one: menuentry "xbmc 10.1" { loopback loop /boot/iso/xbmc-10.1-live.iso linux (loop)/live/vmlinuz video=vesafb boot=live iso-scan/filename=/boot/iso/xbmc-10.1-live.iso xbmc=autostart,nodiskmount splash quiet loglevel=0 persistent quickreboot quickusbmodules notimezone noaccessibility noapparmor noaptcdrom noautologin noxautologin noconsolekeyboard nofastboot nognomepanel nohosts nokpersonalizer nolanguageselector nolocales nonetworking nopowermanagement noprogramcrashes nojockey nosudo noupdatenotifier nouser nopolkitconf noxautoconfig noxscreensaver nopreseed union=aufs initrd (loop)/live/initrd.img } Any more ideas or any more information I should supply?

  Read the article

• Dual hard drive Windows 7 system, modified the registry to get programs to install on second drive, now IE doesn't work

  - by paul

  I have a dual hard drive Windows 7 system, Windows is installed on an SSD (C:) and I modified the registry to try to force programs to install on second HDD drive (another letter). The registry edits are pretty simple, just a few keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion to change the drive letter. For the most part the system is very fast and works great, but IE doesn't work anymore. With IE10, it opens for a flash with a white window then closes. I tried installed IE11 which opens a white window for a few seconds, doesn't respond, then crashes. I've tried all the solutions I could find. This includes resetting the IE settings, "uninstalling" and re-installing IE, which is just turning it on and off in "Turn Windows Features on or off", copying the Program Files\Internet Explorer files onto both/either drives, changing the registry keys back to use C:, lots of rebooting, and safe mode. Nothing has worked. I don't see errors in the event viewer, but I might not know what to look for. Any ideas on how to get IE running? I don't need IE for daily browsing, I just need it for cross-browser testing on sites I build and on the rare occasion a page only works in IE. I don't really want to use a virtual machine, but would be ok with something standalone like tredosoft's, but I'm not aware of something like that for current versions of IE.

  Read the article

• Problem running “Central Administration” website after windows update at Windows 2003 Server Standar

  - by Magdy Roshdy

  I was have WSS 2.0 and then I upgraded to WSS 3.0 and the old instalation database was SQL 2000, now I have another SQL Server instance called:server_name\MICROSOFT##SSEE . After upgrade every thing works fine and our team started to use the portal and we sent lot of documents and make lot of activities on it. The problem started after installing Windows updates the website suddenly stopped and giving me an error "Cannot connect to the configuration database" If I tried to open SharePoint Products and Technologies Configuration Wizard it is gives me a strange error says: "An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: SharePoint Products and Technologies cannot be configured. The current installation mode does not support SKU to SKU upgrades because there exists an older version of Windows SharePoint Services that must be upgraded first " At this post:http://stackoverflow.com/questions/114398/iis-error-cannot-connect-to-the-configuration-database/249494#249494 the guy of the second answer have the same problem and he suggested a solution but I don't understand well. I tried as he suggested to make the identity of the app pool of the SharePoint web site as "IWAM_server_name " after that the error changed as he said and I web site give me "Server Application Unavailable " and when checked the Event Viewer at the server I found that ASP.NET 2.0 give this exception: "Could not load file or assembly 'System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. Access is denied ." and I don't know how to solve this problem. I'm really want to make my web site working because our team really need these documents and its stuff. I hope I will find some one to help me.

  Read the article

• Nginx settings are screwing up my Drupal form submissions, how do I fix?

  - by bflora

  How do I tell Nginx to "ignore" specific URLS or pages on my web site? I run a Drupal site where anonymous visitors get served via NGINX while logged in users get served via Apache. We do this to keep the load down and scale better. It works great, except, since we set up nginx, a good number of Drupal forms no longer work. For example, before installing Nginx, if you created a new article, then clicked "edit" and edited the article. You could click "save" and your changes to the article would be saved. After setting up nginx, when you make edits and then click "save," the page simple refreshes, but now with "nginx-index.php" inserted into the URL. And your changes to the form were not actually saved to the database. So if you go to edit an article, you'll be on domain.com/node/##/edit or something like that. When you try to save your changes to the form, you'll wind up at domain.com/nginx-index.php?q=node/##/edit. And your changes will not be saved. There is a way around this, but only for administrative users. If you go to a form where this problem is happening, then comment or comment-out three lines in our settings.php file, the form will save properly. Those three lines are: // 'cache_form' = array( // 'engine' = 'db', // ), If they're commented, you uncomment them, them save the form. If they're uncommented, you comment them out and save the form. Obviously, this sucks. My friend who set up our server (and then left the country) told me that there are some Nginx settings that can tell it to "ignore" certain URLs or pages which could work here. How do I do this and where do I do it?

  Read the article

• Is it bad to redirect http to https?

  - by jasondavis

  I just installed an SSL Certificate on my server. I use a web hosting panel called ZPanel that is an open source project. It then set up a redirect for all traffic on my domain on Port 80 to redirect it to Port 443. In other words, all my http://example.com traffic is now redirected to the appropriate https://example.com version of the page. The redirect is done in my Apache Virtual Hosts file with something like this... RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] My question is, are there any drawbacks to using SSL? Since this is not a 301 Redirect, will I lose link juice/ranking in search engines by switching to https? I appreciate the help. I have always wanted to set up SSL on a server, just for the practice of doing it, and I finally decided to do it tonight. It seems to be working well so far, but I am not sure if it's a good idea to use this on every page. My site is not eCommerce and doesn't handle sensitive data; it's mainly for looks and the thrill of installing it for learning. UPDATED ISSUE Strangely Bing creates this screenshot from my site now that it is using HTTPS everywhere...

  Read the article

• Spotlight has stopped indexing/returning anything in /Applications

  - by pra

  After a recent kernel panic & restart, Spotlight no longer seems to know anything about the files under my /Applications folder. I used to launch Safari.app, Opera.app, Textedit.app, etc via Spotlight as a matter of routine. Now, I get "No results found" for all of them (except Textedit.app, which launches a demo text editor from a Qt installation). The programs are still there & still launch directly from Finder. I've already run disk utility & verified the disk, no issues. I repaired disk permissions, which made several changes, but to no effect. Is there anything else I can do, short of re-installing MacOS? Update: I already verified that "Applications" was still checked in my Spotlight preferences. It was still returning applications located elsewhere (the Qt textedit sample app), so that shouldn't have been the issue. A few hours later it resolved itself; I guess there's a background process running on some interval.

  Read the article

• Installed Windows 7 Ultimate on D Drive and previous Windows 7 Enterprise on C Drive has stopped starting up

  - by teenup

  Please please help! I have installed Windows 7 Ultimate on same hard drive on D Drive on my laptop and the previous Windows 7 Enterprise which was installed on C Drive is not booting up now. When I turn on my laptop, I see two Windows 7 on the screen, when I select newer one, it starts, but when I select older one which is Enterprise edition, system won't start and I get the DOS black screen with this error message: Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "repair your computer." Info: The boot selection failed because a required device is inaccessible. I notice that when I run the newer OS installed, the previous OS's drive (Which is D: now instead of C:) has become unusable and when I double click it, it asks me to format the drive. The data, that I had on my D Drive (Which is now C Drive for new OS), I had copied it to a network path and it is available. It was containing Windows 7 Users folder which I copied at that time when installing new windows. I have copied that Users folder again to the new OS's C Drive thinking it would run again, but of no use. Please please please...if someone can help...It is extremely required for me. Thanks a lot in advance.

  Read the article

• Is there any way to synchronize AD users with Office 365 but still be able to edit them online?

  - by Massimo

  I'm performing a migration to Office 365 from a third-party mail server (MDaemon); the local Active Directory doesn't include any Exchange server, and never had any. We will need directory synchronization in order to enable users to log on to Office 365 using their domain credentials; but it seems that as soon as you enable directory synchronization, you can't perform any action anymore on Office 365 users: all changes need to be made on the local Active Directory, and then replicated by the synchronization process. For ordinary users with a single e-mail address and standard features, this is not a big problem; but what about users which need an additional address? What if I need to configure some nonstandard setting, like "hide from address list" or a custom mailbox quota? From what I've gathered, the only supported way to do this, as you can't directly edit Office 365 objects anymore after synchronization is enabled, is to extend the local AD schema with Exchange attributes, and then manually edit them (!). Or, you can install at least one local Exchange server, and then use the Exchange administrative tools to configure the required settings. Is this correct or am I missing something? Is there any way to synchronize user accounts and password, but still be able to edit user settings directly in Office 365? If not (everything really needs to be set locally and then synchronized), is there any simpler way to do this than manually editing LDAP attributes or installing a local Exchange server?

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >