Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 265/303 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

• WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

  - by prayingpantis

  So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

  Read the article

• Revamping an old and unstable office IT-solution using Windows Server and OpenVPN

  - by cmbrnt

  I've been given the cumbersome task to totally redo the IT-infrastructure for a customer's office. They are currently running Windows XP all over, with one computer acting as a file server with no control over which users have access to which files, and so on. To top it off, this file server also functions as a workstation, which means it gets rebooted every time the user notices some sluggish behavior or experiences problems with flash games. To say the least, this isn't working for them. Now - I've got a very slim budget, but I need to set up a new server, and I wish to run Windows Server 2008 on it. I also need the ability to access the network remotely via VPN. Would it be a good idea to install VMware ESXi 4.1 onto the new server, and then run Windows Server 2008 as well as a separate Debian install for openvpn on it? I don't like the Domain Controller for the future AD to also run a VPN-server, because of stability issues when something goes to hell with either of them. There will be no redundancy though. However, I'm not sure if there is something to gain by installing a VPN solution on the Windows Server itself, when it comes to accessing file shares on the network via VPN. I don't know how to enable users logging in via the VPN to access the remote files, since they will be accessing the network from their own home computers (which is indeed a really bad idea, but this is what I've got to work with). They won't be logged in to the windows Domain, but rather their home workgroups. I need to be able to grant access to files in certain directories based on the logged in AD-user, but every computer won't necessarily be configured to log into the domain. I'm not sure how to explain this in a good way, but I'd be happy to clarify if somethings not clear. Any help would be great, because I've got a feeling that I can't do this without introducing a bunch of costly new rules when it comes to their IT-solution. I'd rather leave that untouched and go on my merry way to the next assignment.

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something. Edit: Re-installed windows on this system yesterday. That's my usual solution to issues I don't feel like diagnosing, like this one.

  Read the article

• ubuntu suspend works, but then immediately starts

  - by Yoav Aner

  Having a strange problem after upgrading from Ubuntu 11.04 to 12.04. Previously I could suspend just fine, the computer will switch itself off. Pressing the ON button will switch it on and it will resume. After upgrading to 12.04 however, when I suspend it does (almost) the same, turns itself off, but about 2 seconds later, the computer turns itself on again, and it goes back to life from suspend. I haven't changed any of the hardware or BIOS and it was working before just fine. Also tried every possible switch of pm-suspend ; setting acpi_sleep=nonvs in /etc/default/grub and also this suggestion but nothing seems to make a difference... UPDATE: just tested suspend using the 12.04 liveCD and it was working perfectly fine... but when I boot normally it doesn't. ANOTHER UPDATE: After re-installing I noticed that I can suspend. However, after restoring my home folder - the strange suspend problem happens again. I then created a new user account. When I login to the other account I can suspend without a problem... So This seems specific to my account only. How/What can cause this in my own user settings?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• Google Chrome won't install via IE9/Windows7

  - by purir

  Using IE9, I've tried installing Google Chrome on Windows 7 from this url http://www.google.com/chrome/eula.html?hl=en-GB&platform=win But get the following error (apologies for uncouthly dumping this nonsense...) Any ideas dearly appreciated! PLATFORM VERSION INFO Windows : 6.1.7601.65536 (Win32NT) Common Language Runtime : 4.0.30319.235 System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100) clr.dll : 4.0.30319.235 (RTMGDR.030319-2300) dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100) dfshim.dll : 4.0.31106.0 (Main.031106-0000) SOURCES Deployment url : _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser resulted in exception. Following failure messages were detected: + The system cannot find the file specified. (Exception from HRESULT: 0x80070002) COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [25/06/2011 11:41:04] : Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser has started. ERROR DETAILS Following errors were detected during this operation. * [25/06/2011 11:41:04] System.IO.FileNotFoundException - The system cannot find the file specified. (Exception from HRESULT: 0x80070002) - Source: System.Deployment - Stack trace: at System.Deployment.Internal.Isolation.IsolationInterop.GetUserStore(UInt32 Flags, IntPtr hToken, Guid& riid) at System.Deployment.Application.ComponentStore..ctor(ComponentStoreType storeType, SubscriptionStore subStore) at System.Deployment.Application.SubscriptionStore..ctor(String deployPath, String tempPath, ComponentStoreType storeType) at System.Deployment.Application.SubscriptionStore.get_CurrentUser() at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS No transaction information is available.

  Read the article

• Allow SFTP in iptables

  - by Kevin Orriss

  I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

  Read the article

• Local user vs. domain user? What is the right way here?

  - by ebeeb

  I'm a software developer in a company with 6 employees. Everyone has a machine for him-/herself, so none of the machines is shared. I'm currently setting up my machine with Windows 8 and was experimenting a bit with domain and local user accounts. Correct me please if I'm wrong, but I think the idea behind is, that domain users generally should not be able to modify the configuration of a machine (like installing software), since they are able to login on every single machine in the domain. The local user (usually just one local administrator per machine) is the one who cares about the configuration of the machine. But in my case the login into the domain is just for being able to access directories/servers in the domain (I do not really know the details, all I know is, that loggin into the domain user account is necessary). So overall I've got a local admin account and a domain account used on my machine. While working I'm logged in to my domain user account. But it annoys me, that I always need to enter the credentials of my local user account when I'm about to update/install something, which happens quite often as a software developer. I fixed this with adding the domain account into the user accounts in my control panel and putting it into the Administrators group. The only thing I wanted to know about this: is there something REALLY bad about doing this? Or is there maybe a more common way to be able to act like a local admin, while logged in as a domain user? PS: I'm sorry about the tags, but I don't know the proper ones. I'd be glad if some of the superuser experts could fix this :-)

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• Uninstall Glassfish and metro completely

  - by user775829

  I thought of updating my Glassfish server from 2.1 to 3.1.1 in a Linux machine. I downloaded the .ZIP package. However during uninstalling of Glassfish v2.1 I did not find the uninstall.sh file in "bin" directory. Following are a few steps which I did... I removed the glassfish folder (rm -rf ...) After removing files in the end it gave me a notification that it could not remove 2 files used by Metro. I cant recollect those file names, but I manually deleted that folder. I made a mistake by first not uninstalling Metro. I uninstalled metro completely after that. but it seemed pointless (it uninstalled successfully :P ) I transfered the Glassfish 3.1.1 ZIP file and unzipped and configured it. FOllow are a few Problems I am facing I cannot deploy any of my WAR file. Its giving errors saying " Error creating bean,Instantiation of bean failed etc etc." (However the WAR file is getting deployed successfully in other Linux Machine) When I try installing Metro v2.1 separately, it does not show the admin console or it timesout while starting the domain. The Log File of the Domain says it has started the domain successfully and the process is also created. But after running the command (asadmin) it takes like forever and times out without showing Domain Started Successfully, There is no uninstall.sh in Glassfishv3.1.1 bin directory. How do I completely uninstall Glassfish v 3.1.1 and Metro 2.1 ??? What are the files which I will have to manually remove?

  Read the article

• Expanding raidz vdev

  - by Blubber

  I'm currently planning on installing FreeBSD 9 on my home server. The machine has 4x 1.5TB disks, and at some point, when HDD prices drop I'll be upgrading to something bigger, perhaps 3TB. The disks are connected to an IBM ServerRaid m1015 in IT mode, this card has room for up to eight disks. Now here is the problem, currently the 4x 1.5TB will be connected to the m1015. Then when prices drop I'll be adding something like 4x 3TB, also connected to the m1015. No problem yet, I can just run 2 raidz2 vdevs and put them in the same pool. But, at some point the 1.5TBs will start to break, or I will have to upgrade them when the pool runs out of space. So I started researching if it's possible to expand a raidz vdev, and I found several pages explaining the same procedure, like this on SF: How to upgrade a ZFS RAID-Z array to larger disks on OpenSolaris?. So I went a head and tried that in vmware, I installed FreeBSD 9 and created 6 virtual disks, 3 of 1GB each and 3 of 10GB each. After building a raidz vdev of the 1GBs I replaced them one by one with the 10GB, but the pool did not increase in size. Is this a limitation of the ZFS implementation in FreeBSD? Or am I just doing something wrong?

  Read the article

• What is the --daemon option?

  - by Pascal Dimassimo

  I was installing Solr with Jetty using these instructions. Basically, those instructions made you download the Jetty startup script and copy it to /etc/init.d/jetty. But it was not working. Each time I was starting Jetty, I had a "FAILED" message and nothing to understand why it was happening. I decided to open up the /etc/init.d/jetty script to understand what was happening. I saw that this script was using start-stop-daemon to launch jetty. After a couple of time of debugging, I discovered that removing the --daemon option at the end of the start-stop-daemon call was fixing my problem. I did a couple of research and discovered that this guy had the same problem and resolved it like I did: my removing the --daemon option. What is weird is that the switch does not seem to be specific to start-stop-daemon, because it is not documented in the man page. Also, I've seen it used for other commands. So what is that --daemon option doing? And why removing it resolved my problem? Note that I am working on Ubuntu 10.04.2 LTS.

  Read the article

• Recover data from hard drive with partitions (but not most data) overwritten

  - by Macha

  I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

  Read the article

• Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

  - by emotionull

  I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

  Read the article

• php extensions & apache mods gone/not working after server restart?

  - by user1782359

  I was wondering if anyone has ever come across this before, as I'm pretty stumped to be honest, and my server admin knowledge isn't particular good so I'm not sure what could even be wrong, let alone how to fix it. Basically, Thursday last week everything was fine on our server. I come in on Friday and it's a mess: php extensions are missing/not working, apache modules are gone. (e.g. oci_* was gone completely, odbc_ not working but still there, the apache ntlm_auth for single sign on was gone and so the website wasn't even loading in IE). I'm ruling out anything deliberate because it's just incredibly unlikely. The only thing that really happened between thursday & friday is that on thursday evening one of the network guys did a RAM upgrade on the server and restarted it. That's it, nothing else. Now I'm wondering if somehow those extensions and such which we installed months ago were somehow only saved in a local memory of sorts, and a restart has wiped them? But we installed them all as root, so I don't see why it should be any different from installing anything else. It makes little/no sense to me. To expand on an example of something that's gone very wrong, the php odbc_ extension: It's still on the server, it doesn't return undefined function or anything. But it just cannot connect to the datasource any more. I've tested it through the command line and it's working perfectly fine with that datasource and login details, but all of a sudden having it in the php odbc_connect() function and it just can't connect. ( [S1000][unixODBC][FreeTDS][SQL Server]Unable to connect to data source. ) But unixODBC is set up fine. Like I say i've tested it all through the terminal and it can connect, and we've not changed anything, it's just now all of a sudden not working through the PHP function. Anyone have any ideas whatsoever as to what could be going on? This is on CentOS 5.x by the way.

  Read the article

• Windows preventing running of Telnet client

  - by palswim

  At first, I had issues because Windows 7 doesn't install the Telnet client by default (also, SuperUser has a thread). So, after installing it (and restarting, like Windows asked, though completely unnecessary), I opened a command prompt, and went to run my new Telnet program. I enter telnet, and receive: C:\Users\[USER]>telnet 'telnet' is not recognized as an internal or external command, operable program or batch file. "That's odd," I think to myself. So, in Windows explorer, I navigate to \Windows\System32 and see telnet.exe sitting in that folder. If I double-click on the executable file, the Telnet command prompt opens for me without a problem. So, I return to my Windows Command Prompt, and enter: C:\Users\[USER]>\Windows\System32\telnet.exe '\Windows\System32\telnet.exe' is not recognized as an internal or external command, operable program or batch file. And then (grep comes from cygwin): C:\Users\ryan\Desktop>dir \Windows\System32 | grep telnet Nothing. I've disabled UAC and have no idea why my Command Prompt is lying to me. Anyone experience something similar? To recap: In Windows 7, I have installed Telnet and can see it in my System32 folder, but cannot run it via a Command Prompt.

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• How do I find the Serial Number of a USB Drive?

  - by jamuraa

  I'm trying to re-enable USB Autoplay in a secure way, by installing a program on each of the computers that I use so that I can run my launcher (PStart in this case) whenever I plug in my specific USB drive. The tool that I'm using to enable this - AutoRunGuard - needs the serial number of the USB drive that I am using. I can't figure out where to find this in Windows. Ideally I would not need to install and run a separate program to do this (seemingly) simple task. Since this is a pretty easy question, bonus points if you also tell me how to discover it in Linux as well. What steps do I need to take to retrieve a USB Drive's serial number? UPDATE: Just incase people come here looking for the answer for AutoRunGuard, I discovered that they don't want the USB device serial number, but the volume serial number. The drive serial can be found by going into the command line, navigating to the drive, and executing dir. The volume serial number is found in the top two lines - use it without the dash.

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• Verification of downloaded package with rpm

  - by moooeeeep

  I wanted to install a package on CentOS 6 via rpm (e.g., the current epel-release). EDIT: Of course I would always prefer the installation via yum but somehow I failed to get that specific package installed using this normal approach. As such, the EPEL/FAQ recommends Version 2. As I'm downloading the package through an insecure channel (http) I wanted to make sure that the integrity of the file is verified using information that is not provided with the downloaded file itself. Is this especially true for all of these approaches? I've seen various approaches to this on the internet: Version 1 rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm Version 2 rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm Version 3 wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm rpm --import https://fedoraproject.org/static/0608B895.txt rpm -K epel-release-6-7.noarch.rpm rpm -i epel-release-6-7.noarch.rpm I do not know rpm very well, so I wondered how they might differ? My guess (after reading the manpage) is that the first should only be used when the package is previously not installed, the second would additionally remove previous versions of the package after installation, the first two omit some verification steps before the actual installation that are done by rpm -K. So my main questions at this point are Are my guesses correct or am I missing something? Is the rpm --import ... implicitly done for the first two approaches as well, and if not, isn't it necessary to do so after all? Are these additional checks performed by rpm -K ... any relevant? What is the best (most secure, most reliable, most maintainable, ...) way of installing packages via rpm in general?

  Read the article

• How to set up a server without a hosting control panel

  - by A4J

  I have always used a control panel on my dedicated servers - from cPanel to Plesk to Virtualmin, and I am now considering ditching a CP altogether and manually editing config files. My requirements are fairly simple, I will host multiple sites on the server; some Apache with PHP & Mysql and some Passenger with Rails & Postgres. All will require email smtp/pop. FTP/Stats will not be required. Could someone please give me a quick run-down of what I would need to do - in terms of installing software and configuration? My server will come with a base install of CentOS 6.4 minimal. My thoughts so far: Install/update latest versions of MySQL & Postgres (are they 'safe' out of the box? Or do I need to do anything else like set up root passwords etc?) Install Apache & PHP (again, are the base installs good to go or do they require security tweaks?) Set up nameservers/hostnames/reverse DNS etc (Any guides on how to do this please?) Install Rubygems Install and configure Dovecot and Postfix (any tips on doing this? Or links to how-tos that cover it please?) Set up each website - any links to guides on how to do this? Install/configure firewall (or is the default install good to go?) Any other tips or advice would be greatly appreciated, as would links to guides or how-tos.

  Read the article

• Oracle Linux screen freezes during installation

  - by Fearless

  I was installing Oracle Linux 6.4 on a server, and the screen suddenly froze. Here were the previous steps: I put in the disk, clicked install, checked the disk (no errors), did pre-install setup (clock, root password, host+domain name, etc.), configured two 40GB hard drives in a RAID1 array (no swap, 3100mb encrypted raid partitions, ~100mb ext4 partition mounting to /boot, encrypted ext4 RAID device with mounting to /), selected packages, hit continue. The system did its short preinstall processes, then when to the main installation screen with the long status bar. The installer proceeded like always, but around package 250 out of ~1000, the screen suddenly went black with a text cursor in the upper left corner of the screen and the mouse cursor in its previous place. Neither cursor moved and the only thing that triggered a response was a ctrl-alt-delete that rebooted it. I have run this in VMs before without this issue. Memtest hasn't reported anything, and the media check went smoothly. The machine has supported Ubuntu server without issues before. Any ideas? I have tried booting after that, but the grub bootloader tries to find fd0 for some reason (I have no idea why it would search for the floppy disk). UPDATE My server successfully installed, but won't boot up. I think that, for some reason, it is still using the old bootloader from the previous installation. Any ideas on how to fix that?

  Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >