Search Results

Search found 19953 results on 799 pages for 'post get'.

Page 263/799 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• The Product Owner

  - by Robert May

  In a previous post, I outlined the rules of Scrum.  This post details one of those rules. Picking a most important part of Scrum is difficult.  All of the rules are required, but if there were one rule that is “more” required that every other rule, its having a good Product Owner.  Simply put, the Product Owner can make or break the project. Duties of the Product Owner A Product Owner has many duties and responsibilities.  I’ll talk about each of these duties in detail below. A Product Owner: Discovers and records stories for the backlog. Prioritizes stories in the Product Backlog, Release Backlog and Iteration Backlog. Determines Release dates and Iteration Dates. Develops story details and helps the team understand those details. Helps QA to develop acceptance tests. Interact with the Customer to make sure that the product is meeting the customer’s needs. Discovers and Records Stories for the Backlog When I do Scrum, I always use User Stories as the means for capturing functionality that’s required in the system.  Some people will use Use Cases, but the same rule applies.  The Product Owner has the ultimate responsibility for figuring out what functionality will be in the system.  Many different mechanisms for capturing this input can be used.  User interviews are great, but all sources should be considered, including talking with Customer Support types.  Often, they hear what users are struggling with the most and are a great source for stories that can make the application easier to use. Care should be taken when soliciting user stories from technical types such as programmers and the people that manage them.  They will almost always give stories that are very technical in nature and may not have a direct benefit for the end user.  Stories are about adding value to the company.  If the stories don’t have direct benefit to the end user, the Product Owner should question whether or not the story should be implemented.  In general, technical stories should be included as tasks in User Stories.  Technical stories are often needed, but the ultimate value to the user is in user based functionality, so technical stories should be considered nothing more than overhead in providing that user functionality. Until the iteration prior to development, stories should be nothing more than short, one line placeholders. An exercise called Story Planning can be used to brainstorm and come up with stories.  I’ll save the description of this activity for another blog post. For more information on User Stories, please read the book User Stories Applied by Mike Cohn. Prioritizes Stories in the Product Backlog, Release Backlog and Iteration Backlog Prioritization of stories is one of the most difficult tasks that a Product Owner must do.  A key concept of Scrum done right is the need to have the team working from a single set of prioritized stories.  If the team does not have a single set of prioritized stories, Scrum will likely fail at your organization.  The Product Owner is the ONLY person who has the responsibility to prioritize that list.  The Product Owner must be very diplomatic and sincerely listen to the people around him so that he can get the priorities correct. Just listening will still not yield the proper priorities.  Care must also be taken to ensure that Return on Investment is also considered.  Ultimately, determining which stories give the most value to the company for the least cost is the most important factor in determining priorities.  Product Owners should be willing to look at cold, hard numbers to determine the order for stories.  Even when many people want a feature, if that features is costly to develop, it may not have as high of a return on investment as features that are cheaper, but not as popular. The act of prioritization often causes conflict in an environment.  Customer Service thinks that feature X is the most important, because it will stop people from calling.  Operations thinks that feature Y is the most important, because it will stop servers from crashing.  Developers think that feature Z is most important because it will make writing software much easier for them.  All of these are useful goals, but the team can have only one list of items, and each item must have a priority that is different from all other stories.  The Product Owner will determine which feature gives the best return on investment and the other features will have to wait their turn, which means that someone will not have their top priority feature implemented first. A weak Product Owner will refuse to do prioritization.  I’ve heard from multiple Product Owners the following phrase, “Well, it’s all got to be done, so what does it matter what order we do it in?”  If your product owner is using this phrase, you need a new Product Owner.  Order is VERY important.  In Scrum, every release is potentially shippable.  If the wrong priority items are developed, then the value added in each release isn’t what it should be.  Additionally, the Product Owner with this mindset doesn’t understand Agile.  A product is NEVER finished, until the company has decided that it is no longer a going concern and they are no longer going to sell the product.  Therefore, prioritization isn’t an event, its something that continues every day.  The logical extension of the phrase “It’s all got to be done” is that you will never ship your product, since a product is never “done.”  Once stories have been prioritized, assigning them to the Release Backlog and the Iteration Backlog becomes relatively simple.  The top priority items are copied into the respective backlogs in order and the task is complete.  The team does have the right to shuffle things around a little in the iteration backlog.  For example, they may determine that working on story C with story A is appropriate because they’re related, even though story B is technically a higher priority than story C.  Or they may decide that story B is too big to complete in the time available after Story A has tasks created, so they’ll work on Story C since it’s smaller.  They can’t, however, go deep into the backlog to pick stories to implement.  The team and the Product Owner should work together to determine what’s best for the company. Prioritization is time consuming, but its one of the most important things a Product Owner does. Determines Release Dates and Iteration Dates Product owners are responsible for determining release dates for a product.  A common misconception that Product Owners have is that every “release” needs to correspond with an actual release to customers.  This is not the case.  In general, releases should be no more than 3 months long.  You  may decide to release the product to the customers, and many companies do release the product to customers, but it may also be an internal release. If a release date is too far away, developers will fall into the trap of not feeling a sense of urgency.  The date is far enough away that they don’t need to give the release their full attention.  Additionally, important tasks, such as performance tuning, regression testing, user documentation, and release preparation, will not happen regularly, making them much more difficult and time consuming to do.  The more frequently you do these tasks, the easier they are to accomplish. The Product Owner will be a key participant in determining whether or not a release should be sent out to the customers.  The determination should be made on whether or not the features contained in the release are valuable enough  and complete enough that the customers will see real value in the release.  Often, some features will take more than three months to get them to a state where they qualify for a release or need additional supporting features to be released.  The product owner has the right to make this determination. In addition to release dates, the Product Owner also will help determine iteration dates.  In general, an iteration length should be chosen and the team should follow that iteration length for an extended period of time.  If the iteration length is changed every iteration, you’re not doing Scrum.  Iteration lengths help the team and company get into a rhythm of developing quality software.  Iterations should be somewhere between 2 and 4 weeks in length.  Any shorter, and significant software will likely not be developed.  Any longer, and the team won’t feel urgency and planning will become very difficult. Iterations may not be extended during the iteration.  Companies where Scrum isn’t really followed will often use this as a strategy to complete all stories.  They don’t want to face the harsh reality of what their true performance is, and looking good is more important than seeking visibility and improving the process and team.  Companies like this typically don’t allow failure.  This is unhealthy.  Failure is part of life and unless we learn from it, we can’t improve.  I would much rather see a team push out stories to the next iteration and then have healthy discussions about why they failed rather than extend the iteration and not deal with the core problems. If iteration length varies, retrospectives become more difficult.  For example, evaluating the performance of the team’s estimation efforts becomes much more difficult if the iteration length varies.  Also, the team must have a velocity measurement.  If the iteration length varies, measuring velocity becomes impossible and upper management no longer will have the ability to evaluate the teams performance.  People external to the team will no longer have the ability to determine when key features are likely to be developed.  Variable iterations cause the entire company to fail and likely cause Scrum to fail at an organization. Develops Story Details and Helps the Team Understand Those Details A key concept in Scrum is that the stories are nothing more than a placeholder for a conversation.  Stories should be nothing more than short, one line statements about the functionality.  The team will then converse with the Product Owner about the details about that story.  The product owner needs to have a very good idea about what the details of the story are and needs to be able to help the team understand those details. Too often, we see this requirement as being translated into the need for comprehensive documentation about the story, including old fashioned requirements documentation.  The team should only develop the documentation that is required and should not develop documentation that is only created because their is a process to do so. In general, what we see that works best is the iteration before a team starts development work on a story, the Product Owner, with other appropriate business analysts, will develop the details of that story.  They’ll figure out what business rules are required, potentially make paper prototypes or other light weight mock-ups, and they seek to understand the story and what is implied.  Note that the time allowed for this task is deliberately short.  The Product Owner only has a single iteration to develop all of the stories for the next iteration. If more than one iteration is used, I’ve found that teams will end up with Big Design Up Front and traditional requirements documents.  This is a waste of time, since the team will need to then have discussions with the Product Owner to figure out what the requirements document says.  Instead of this, skip making the pretty pictures and detailing the nuances of the requirements and build only what is minimally needed by the team to do development.  If something comes up during development, you can address it at that time and figure out what you want to do.  The goal is to keep things as light weight as possible so that everyone can move as quickly as possible. Helps QA to Develop Acceptance Tests In Scrum, no story can be counted until it is accepted by QA.  Because of this, acceptance tests are very important to the team.  In general, acceptance tests need to be developed prior to the iteration or at the very beginning of the iteration so that the team can make sure that the tasks that they develop will fulfill the acceptance criteria. The Product Owner will help the team, including QA, understand what will make the story acceptable.  Note that the Product Owner needs to be careful about specifying that the feature will work “Perfectly” at the end of the iteration.  In general, features are developed a little bit at a time, so only the bit that is being developed should be considered as necessary for acceptance. A weak Product Owner will make statements like “Do it right the first time.”  Not only are these statements damaging to the team (like they would try to do it WRONG the first time . . .), they’re also ignoring the iterative nature of Scrum.  Additionally, a weak product owner will seek to add scope in the acceptance testing.  For example, they will refuse to determine acceptance at the beginning of the iteration, and then, after the team has planned and committed to the iteration, they will expand scope by defining acceptance.  This often causes the team to miss the iteration because scope that wasn’t planned on is included.  There are ways that the team can mitigate this problem.  For example, include extra “Product Owner” time to deal with the uncertainty that you know will be introduced by the Product Owner.  This will slow the perceived velocity of the team and is not ideal, since they’ll be doing more work than they get credit for. Interact with the Customer to Make Sure that the Product is Meeting the Customer’s Needs Once development is complete, what the team has worked on should be put in front of real live people to see if it meets the needs of the customer.  One of the great things about Agile is that if something doesn’t work, we can revisit it in a future iteration!  This frees up the team to make the best decision now and know that if that decision proves to be incorrect, the team can revisit it and change that decision. Features are about adding value to the customer, so if the customer doesn’t find them useful, then having the team make tweaks is valuable.  In general, most software will be 80 to 90 percent “right” after the initial round and only minor tweaks are required.  If proper coding standards are followed, these tweaks are usually minor and easy to accomplish.  Product Owners that are doing a good job will encourage real users to see and use the software, since they know that they are trying to add value to the customer. Poor product owners will think that they know the answers already, that their customers are silly and do stupid things and that they don’t need customer input.  If you have a product owner that is afraid to show the team’s work to real customers, you probably need a different product owner. Up Next, “Who Makes a Good Product Owner.” Followed by, “Messing with the Team.” Technorati Tags: Scrum,Product Owner

  Read the article

• LLBLGen Pro feature highlights: automatic element name construction

  - by FransBouma

  (This post is part of a series of posts about features of the LLBLGen Pro system) One of the things one might take for granted but which has a huge impact on the time spent in an entity modeling environment is the way the system creates names for elements out of the information provided, in short: automatic element name construction. Element names are created in both directions of modeling: database first and model first and the more names the system can create for you without you having to rename them, the better. LLBLGen Pro has a rich, fine grained system for creating element names out of the meta-data available, which I'll describe more in detail below. First the model element related element naming features are highlighted, in the section Automatic model element naming features and after that I'll go more into detail about the relational model element naming features LLBLGen Pro has to offer in the section Automatic relational model element naming features. Automatic model element naming features When working database first, the element names in the model, e.g. entity names, entity field names and so on, are in general determined from the relational model element (e.g. table, table field) they're mapped on, as the model elements are reverse engineered from these relational model elements. It doesn't take rocket science to automatically name an entity Customer if the entity was created after reverse engineering a table named Customer. It gets a little trickier when the entity which was created by reverse engineering a table called TBL_ORDER_LINES has to be named 'OrderLine' automatically. Automatic model element naming also takes into effect with model first development, where some settings are used to provide you with a default name, e.g. in the case of navigator name creation when you create a new relationship. The features below are available to you in the Project Settings. Open Project Settings on a loaded project and navigate to Conventions -> Element Name Construction. Strippers! The above example 'TBL_ORDER_LINES' shows that some parts of the table name might not be needed for name creation, in this case the 'TBL_' prefix. Some 'brilliant' DBAs even add suffixes to table names, fragments you might not want to appear in the entity names. LLBLGen Pro offers you to define both prefix and suffix fragments to strip off of table, view, stored procedure, parameter, table field and view field names. In the example above, the fragment 'TBL_' is a good candidate for such a strip pattern. You can specify more than one pattern for e.g. the table prefix strip pattern, so even a really messy schema can still be used to produce clean names. Underscores Be Gone Another thing you might get rid of are underscores. After all, most naming schemes for entities and their classes use PasCal casing rules and don't allow for underscores to appear. LLBLGen Pro can automatically strip out underscores for you. It's an optional feature, so if you like the underscores, you're not forced to see them go: LLBLGen Pro will leave them alone when ordered to to so. PasCal everywhere... or not, your call LLBLGen Pro can automatically PasCal case names on word breaks. It determines word breaks in a couple of ways: a space marks a word break, an underscore marks a word break and a case difference marks a word break. It will remove spaces in all cases, and based on the underscore removal setting, keep or remove the underscores, and upper-case the first character of a word break fragment, and lower case the rest. Say, we keep the defaults, which is remove underscores and PasCal case always and strip the TBL_ fragment, we get with our example TBL_ORDER_LINES, after stripping TBL_ from the table name two word fragments: ORDER and LINES. The underscores are removed, the first character of each fragment is upper-cased, the rest lower-cased, so this results in OrderLines. Almost there! Pluralization and Singularization In general entity names are singular, like Customer or OrderLine so LLBLGen Pro offers a way to singularize the names. This will convert OrderLines, the result we got after the PasCal casing functionality, into OrderLine, exactly what we're after. Show me the patterns! There are other situations in which you want more flexibility. Say, you have an entity Customer and an entity Order and there's a foreign key constraint defined from the target of Order and the target of Customer. This foreign key constraint results in a 1:n relationship between the entities Customer and Order. A relationship has navigators mapped onto the relationship in both entities the relationship is between. For this particular relationship we'd like to have Customer as navigator in Order and Orders as navigator in Customer, so the relationship becomes Customer.Orders 1:n Order.Customer. To control the naming of these navigators for the various relationship types, LLBLGen Pro defines a set of patterns which allow you, using macros, to define how the auto-created navigator names will look like. For example, if you rather have Customer.OrderCollection, you can do so, by changing the pattern from {$EndEntityName$P} to {$EndEntityName}Collection. The $P directive makes sure the name is pluralized, which is not what you want if you're going for <EntityName>Collection, hence it's removed. When working model first, it's a given you'll create foreign key fields along the way when you define relationships. For example, you've defined two entities: Customer and Order, and they have their fields setup properly. Now you want to define a relationship between them. This will automatically create a foreign key field in the Order entity, which reflects the value of the PK field in Customer. (No worries if you hate the foreign key fields in your classes, on NHibernate and EF these can be hidden in the generated code if you want to). A specific pattern is available for you to direct LLBLGen Pro how to name this foreign key field. For example, if all your entities have Id as PK field, you might want to have a different name than Id as foreign key field. In our Customer - Order example, you might want to have CustomerId instead as foreign key name in Order. The pattern for foreign key fields gives you that freedom. Abbreviations... make sense of OrdNr and friends I already described word breaks in the PasCal casing paragraph, how they're used for the PasCal casing in the constructed name. Word breaks are used for another neat feature LLBLGen Pro has to offer: abbreviation support. Burt, your friendly DBA in the dungeons below the office has a hate-hate relationship with his keyboard: he can't stand it: typing is something he avoids like the plague. This has resulted in tables and fields which have names which are very short, but also very unreadable. Example: our TBL_ORDER_LINES example has a lovely field called ORD_NR. What you would like to see in your fancy new OrderLine entity mapped onto this table is a field called OrderNumber, not a field called OrdNr. What you also like is to not have to rename that field manually. There are better things to do with your time, after all. LLBLGen Pro has you covered. All it takes is to define some abbreviation - full word pairs and during reverse engineering model elements from tables/views, LLBLGen Pro will take care of the rest. For the ORD_NR field, you need two values: ORD as abbreviation and Order as full word, and NR as abbreviation and Number as full word. LLBLGen Pro will now convert every word fragment found with the word breaks which matches an abbreviation to the given full word. They're case sensitive and can be found in the Project Settings: Navigate to Conventions -> Element Name Construction -> Abbreviations. Automatic relational model element naming features Not everyone works database first: it may very well be the case you start from scratch, or have to add additional tables to an existing database. For these situations, it's key you have the flexibility that you can control the created table names and table fields without any work: let the designer create these names based on the entity model you defined and a set of rules. LLBLGen Pro offers several features in this area, which are described in more detail below. These features are found in Project Settings: navigate to Conventions -> Model First Development. Underscores, welcome back! Not every database is case insensitive, and not every organization requires PasCal cased table/field names, some demand all lower or all uppercase names with underscores at word breaks. Say you create an entity model with an entity called OrderLine. You work with Oracle and your organization requires underscores at word breaks: a table created from OrderLine should be called ORDER_LINE. LLBLGen Pro allows you to do that: with a simple checkbox you can order LLBLGen Pro to insert an underscore at each word break for the type of database you're working with: case sensitive or case insensitive. Checking the checkbox Insert underscore at word break case insensitive dbs will let LLBLGen Pro create a table from the entity called Order_Line. Half-way there, as there are still lower case characters there and you need all caps. No worries, see below Casing directives so everyone can sleep well at night For case sensitive databases and case insensitive databases there is one setting for each of them which controls the casing of the name created from a model element (e.g. a table created from an entity definition using the auto-mapping feature). The settings can have the following values: AsProjectElement, AllUpperCase or AllLowerCase. AsProjectElement is the default, and it keeps the casing as-is. In our example, we need to get all upper case characters, so we select AllUpperCase for the setting for case sensitive databases. This will produce the name ORDER_LINE. Sequence naming after a pattern Some databases support sequences, and using model-first development it's key to have sequences, when needed, to be created automatically and if possible using a name which shows where they're used. Say you have an entity Order and you want to have the PK values be created by the database using a sequence. The database you're using supports sequences (e.g. Oracle) and as you want all numeric PK fields to be sequenced, you have enabled this by the setting Auto assign sequences to integer pks. When you're using LLBLGen Pro's auto-map feature, to create new tables and constraints from the model, it will create a new table, ORDER, based on your settings I previously discussed above, with a PK field ID and it also creates a sequence, SEQ_ORDER, which is auto-assigns to the ID field mapping. The name of the sequence is created by using a pattern, defined in the Model First Development setting Sequence pattern, which uses plain text and macros like with the other patterns previously discussed. Grouping and schemas When you start from scratch, and you're working model first, the tables created by LLBLGen Pro will be in a catalog and / or schema created by LLBLGen Pro as well. If you use LLBLGen Pro's grouping feature, which allows you to group entities and other model elements into groups in the project (described in a future blog post), you might want to have that group name reflected in the schema name the targets of the model elements are in. Say you have a model with a group CRM and a group HRM, both with entities unique for these groups, e.g. Employee in HRM, Customer in CRM. When auto-mapping this model to create tables, you might want to have the table created for Employee in the HRM schema but the table created for Customer in the CRM schema. LLBLGen Pro will do just that when you check the setting Set schema name after group name to true (default). This gives you total control over where what is placed in the database from your model. But I want plural table names... and TBL_ prefixes! For now we follow best practices which suggest singular table names and no prefixes/suffixes for names. Of course that won't keep everyone happy, so we're looking into making it possible to have that in a future version. Conclusion LLBLGen Pro offers a variety of options to let the modeling system do as much work for you as possible. Hopefully you enjoyed this little highlight post and that it has given you new insights in the smaller features available to you in LLBLGen Pro, ones you might not have thought off in the first place. Enjoy!

  Read the article

• apt-get is broken

  - by Amol Shinde

  I Cannot install any package in the server, As I am newbie in Server. In Morning I found that some, I am not able to install any package from command line in the server,Now every package is now manually downloaded packages and then installed in the server. Can any one Please tell me what is the issue and how could it be resolved. OS:- Ubuntu 10.04.4 LTS \n \l (64 Bit) Below is the error: iam@ubuntu$ sudo apt-get install pidgin Reading package lists... Done Building dependency tree Reading state information... Done pidgin is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 102 not upgraded. 32 not fully installed or removed. After this operation, 0B of additional disk space will be used. Traceback (most recent call last): File "/usr/bin/apt-listchanges", line 33, in <module> from ALChacks import * File "/usr/share/apt-listchanges/ALChacks.py", line 32, in <module> sys.stderr.write(_("Can't set locale; make sure $LC_* and $LANG are correct!\n")) NameError: name '_' is not defined perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_IN" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up shared-mime-info (0.71-1ubuntu2) ... /var/lib/dpkg/info/shared-mime-info.postinst: line 13: 21935 Segmentation fault update-mime-database.real /usr/share/mime dpkg: error processing shared-mime-info (--configure): subprocess installed post-installation script returned error exit status 139 dpkg: dependency problems prevent configuration of libgtk2.0-0: libgtk2.0-0 depends on shared-mime-info; however: Package shared-mime-info is not configured yet. dpkg: error processing libgtk2.0-0 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of chromium-browser: chromium-browser depends on libgtk2.0-0 (>= 2.20.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing chromium-browser (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of chromium-codecs-ffmpeg: chromium-codecs-ffmpeg depends on chromium-browser (>= 4.0.203.0~); however: Package chromium-browser is not configured yet. dpkg: error processing chromium-codecs-ffmpeg (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of chromium-browser-l10n: chromium-browser-l10n depends on chromium-browser (= 18.0.1025.151~r130497-0ubuntu0.10.04.No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already 1); however: Package chromium-browser is not configured yet. dpkg: error processing chromium-browser-l10n (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libevdocument2: libevdocument2 depends on libgtk2.0-0 (>= 2.14.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libevdocument2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libevview2: libevview2 depends on libevdocument2 (>= 2.29.5); however: Package libevdocument2 is not configured yet. libevview2 depends on libgtk2.0-0 (>= 2.20.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libevview2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of evince: evince depends on libevdocument2 (>= 2.29.5); however: Package libevdocument2 is not configured yet. evince depends on libevview2 (>= 2.29.No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already 5); however: Package libevview2 is not configured yet. evince depends on libgtk2.0-0 (>= 2.16.0); however: Package libgtk2.0-0 is not configured yet. evince depends on shared-mime-info; however: Package shared-mime-info is not configured yet. dpkg: error processing evince (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of firefox: firefox depends on libgtk2.0-0 (>= 2.20.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing firefox (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gcalctool: gcalctool depends on libgtk2.0-0 (>= 2.18.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing gcalctool (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgdict-1.0-6: libgdict-1.0-6 depends on libgtk2.0-0 (>= 2.18.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libgdict-1.0-6 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gnome-utils: gnome-utils depends on libgdict-1.0-6 (>= 2.23.90); however: Package libgdict-1.0-6 is not configured yet. gnome-utils depends on libgtk2.0-0 (>= 2.18.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing gnome-utils (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gtk2-engines-pixbuf: gtk2-engines-pixbuf depends on gtk2.0-binver-2.10.0; however: Package gtk2.0-binver-2.10.0 is not installed. Package libgtk2.0-0 which provides gtk2.0-binver-2.10.0 is not configured yet. gtk2-engines-pixbuf depends on libgtk2.0-0 (= 2.20.1-0ubuntu2.1); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing gtk2-engines-pixbuf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libedataserverui1.2-8: libedataserverui1.2-8 depends on libgtk2.0-0 (>= 2.14.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libedataserverui1.2-8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgail18: libgail18 depends on libgtk2.0-0 (= 2.20.1-0ubuntu2.1); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libgail18 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgtk2.0-bin: libgtk2.0-bin depends on libgtk2.0-0 (>= 2.20.1-0ubuntu2.1); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libgtk2.0-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgtk2.0-dev: libgtk2.0-dev depends on libgtk2.0-0 (= 2.20.1-0ubuntu2.1); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing libgtk2.0-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libnotify-dev: libnotify-dev depends on libgtk2.0-dev (>= 2.10); however: Package libgtk2.0-dev is not configured yet. dpkg: error processing libnotify-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of network-manager-gnome: network-manager-gnome depends on libgtk2.0-0 (>= 2.16.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing network-manager-gnome (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openoffice.org-core: openoffice.org-core depends on libgtk2.0-0 (>= 2.10); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing openoffice.org-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openoffice.org-draw: openoffice.org-draw depends on openoffice.org-core (= 1:3.2.0-7ubuntu4.4); however: Package openoffice.org-core is not configured yet. dpkg: error processing openoffice.org-draw (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openoffice.org-impress: openoffice.org-impress depends on openoffice.org-core (= 1:3.2.0-7ubuntu4.4); however: Package openoffice.org-core is not configured yet. openoffice.org-impress depends on openoffice.org-draw (= 1:3.2.0-7ubuntu4.4); however: Package openoffice.org-draw is not configured yet. dpkg: error processing openoffice.org-impress (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of pidgin: pidgin depends on libgtk2.0-0 (>= 2.18.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing pidgin (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Setting up update-manager (1:0.134.12.1) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory dpkg: error processing update-manager (--configure): subprocess installed post-installation script returned error exit status 245 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of update-notifier: update-notifier depends on libgtk2.0-0 (>= 2.14.0); however: Package libgtk2.0-0 is not configured yet. update-notifier depends on update-manager; however: Package update-manager is not configured yet. dpkg: error processing update-notifier (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xulrunner-1.9.2: xulrunner-1.9.2 depends on libgtk2.0-0 (>= 2.18.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing xulrunner-1.9.2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xulrunner-1.9.2-dev: xulrunner-1.9.2-dev depends on xulrunner-1.9.2 (= 1.9.2.28+build1+nobinonly-0ubuntu0.10.04.1); however: Package xulrunner-1.9.2 is not configured yet. xulrunner-1.9.2-dev depends on libnotify-dev; however: Package libnotify-dev is not configured yet. dpkg: error processing xulrunner-1.9.2-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of icedtea6-plugin: icedtea6-plugin depends on xulrunner-1.9.2; however: Package xulrunner-1.9.2 is not configured yet. icedtea6-plugin depends on libgtk2.0-0 (>= 2.8.0); however: Package libgtk2.0-0 is not configured yet. dpkg: error processing icedtea6-plugin (--configure): dependency problems - leaving unconfigured Setting up libgweather-common (2.30.0-0ubuntu1.1) ... No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory dpkg: error processing libgweather-common (--configure): subprocess installed post-installation script returned error exit status 245 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of libgweather1: libgweather1 depends on libgtk2.0-0 (>= 2.11.0); however: Package libgtk2.0-0 is not configured yet. libgweather1 depends on libgweather-common (>= 2.24.0); however: Package libgweather-common is not configured yet. dpkg: error processing libgweather1 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openoffice.org-style-galaxy: openoffice.org-style-galaxy depends on openoffice.org-core (>= 1:3.2.0~beta); however: Package openoffice.org-core is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing openoffice.org-style-galaxy (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openoffice.org-common: openoffice.org-common depends on openoffice.org-style-default | openoffice.org-style; however: Package openoffice.org-style-default is not installed. Package openoffice.org-style-galaxy which provides openoffice.org-style-default is not configured yet. Package openoffice.org-style is not installed. Package openoffice.org-style-galaxy which provides openoffice.org-style is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing openoffice.org-common (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: shared-mime-info libgtk2.0-0 chromium-browser chromium-codecs-ffmpeg chromium-browser-l10n libevdocument2 libevview2 evince firefox gcalctool libgdict-1.0-6 gnome-utils gtk2-engines-pixbuf libedataserverui1.2-8 libgail18 libgtk2.0-bin libgtk2.0-dev libnotify-dev network-manager-gnome openoffice.org-core openoffice.org-draw openoffice.org-impress pidgin update-manager update-notifier xulrunner-1.9.2 xulrunner-1.9.2-dev icedtea6-plugin libgweather-common libgweather1 openoffice.org-style-galaxy openoffice.org-common E: Sub-process /usr/bin/dpkg returned an error code (1) While typing command in terminal, command is not auto-completing.

  Read the article

• Windows Phone 7: Building a simple dictionary web client

  - by TechTwaddle

  Like I mentioned in this post a while back, I came across a dictionary web service called Aonaware that serves up word definitions from various dictionaries and is really easy to use. The services page on their website, http://services.aonaware.com/DictService/DictService.asmx, lists all the operations that are supported by the dictionary service. Here they are, Word Dictionary Web Service The following operations are supported. For a formal definition, please review the Service Description. Define Define given word, returning definitions from all dictionaries DefineInDict Define given word, returning definitions from specified dictionary DictionaryInfo Show information about the specified dictionary DictionaryList Returns a list of available dictionaries DictionaryListExtended Returns a list of advanced dictionaries (e.g. translating dictionaries) Match Look for matching words in all dictionaries using the given strategy MatchInDict Look for matching words in the specified dictionary using the given strategy ServerInfo Show remote server information StrategyList Return list of all available strategies on the server Follow the links above to get more information on each API. In this post we will be building a simple windows phone 7 client which uses this service to get word definitions for words entered by the user. The application will also allow the user to select a dictionary from all the available ones and look up the word definition in that dictionary. So of all the apis above we will be using only two, DictionaryList() to get a list of all supported dictionaries and DefineInDict() to get the word definition from a particular dictionary. Before we get started, a note to you all; I would have liked to implement this application using concepts from data binding, item templates, data templates etc. I have a basic understanding of what they are but, being a beginner, I am not very comfortable with those topics yet so I didn’t use them. I thought I’ll get this version out of the way and maybe in the next version I could give those a try. A somewhat scary mock-up of the what the final application will look like, Select Dictionary is a list picker control from the silverlight toolkit (you need to download and install the toolkit if you haven’t already). Below it is a textbox where the user can enter words to look up and a button beside it to fetch the word definition when clicked. Finally we have a textblock which occupies the remaining area and displays the word definition from the selected dictionary. Create a silverlight application for windows phone 7, AonawareDictionaryClient, and add references to the silverlight toolkit and the web service. From the solution explorer right on References and select Microsoft.Phone.Controls.Toolkit from under the .NET tab, Next, add a reference to the web service. Again right click on References and this time select Add Service Reference In the resulting dialog paste the service url in the Address field and press go, (url –> http://services.aonaware.com/DictService/DictService.asmx) once the service is discovered, provide a name for the NameSpace, in this case I’ve called it AonawareDictionaryService. Press OK. You can now use the classes and functions that are generated in the AonawareDictionaryClient.AonawareDictionaryService namespace. Let’s get the UI done now. In MainPage.xaml add a namespace declaration to use the toolkit controls, xmlns:toolkit="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Toolkit" the content of LayoutRoot is changed as follows, (sorry, no syntax highlighting in this post) <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,5,0,5">     <TextBlock x:Name="ApplicationTitle" Text="AONAWARE DICTIONARY CLIENT" Style="{StaticResource PhoneTextNormalStyle}"/>     <!--<TextBlock x:Name="PageTitle" Text="page name" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/>--> </StackPanel> <!--ContentPanel - place additional content here--> <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0">     <Grid.RowDefinitions>         <RowDefinition Height="Auto"/>         <RowDefinition Height="Auto"/>         <RowDefinition Height="*"/>     </Grid.RowDefinitions>     <toolkit:ListPicker Grid.Column="1" x:Name="listPickerDictionaryList"                         Header="Select Dictionary :">     </toolkit:ListPicker>     <Grid Grid.Row="1" Margin="0,5,0,0">         <Grid.ColumnDefinitions>             <ColumnDefinition Width="*"/>             <ColumnDefinition Width="Auto" />         </Grid.ColumnDefinitions>         <TextBox x:Name="txtboxInputWord" Grid.Column="0" GotFocus="OnTextboxInputWordGotFocus" />         <Button x:Name="btnGo" Grid.Column="1" Click="OnButtonGoClick" >             <Button.Content>                 <Image Source="/images/button-go.png"/>             </Button.Content>         </Button>     </Grid>     <ScrollViewer Grid.Row="2" x:Name="scrollViewer">         <TextBlock  Margin="12,5,12,5"  x:Name="txtBlockWordMeaning" HorizontalAlignment="Stretch"                    VerticalAlignment="Stretch" TextWrapping="Wrap"                    FontSize="26" />     </ScrollViewer> </Grid> I have commented out the PageTitle as it occupies too much valuable space, and the ContentPanel is changed to contain three rows. First row contains the list picker control, second row contains the textbox and the button, and the third row contains a textblock within a scroll viewer. The designer will now be showing the final ui, Now go to MainPage.xaml.cs, and add the following namespace declarations, using Microsoft.Phone.Controls; using AonawareDictionaryClient.AonawareDictionaryService; using System.IO.IsolatedStorage; A class called DictServiceSoapClient would have been created for you in the background when you added a reference to the web service. This class functions as a wrapper to the services exported by the web service. All the web service functions that we saw at the start can be access through this class, or more precisely through an object of this class. Create a data member of type DictServiceSoapClient in the Mainpage class, and a function which initializes it, DictServiceSoapClient DictSvcClient = null; private DictServiceSoapClient GetDictServiceSoapClient() {     if (null == DictSvcClient)     {         DictSvcClient = new DictServiceSoapClient();     }     return DictSvcClient; } We have two major tasks remaining. First, when the application loads we need to populate the list picker with all the supported dictionaries and second, when the user enters a word and clicks on the arrow button we need to fetch the word’s meaning. Populating the List Picker In the OnNavigatingTo event of the MainPage, we call the DictionaryList() api. This can also be done in the OnLoading event handler of the MainPage; not sure if one has an advantage over the other. Here’s the code for OnNavigatedTo, protected override void OnNavigatedTo(System.Windows.Navigation.NavigationEventArgs e) {     DictServiceSoapClient client = GetDictServiceSoapClient();     client.DictionaryListCompleted += new EventHandler<DictionaryListCompletedEventArgs>(OnGetDictionaryListCompleted);     client.DictionaryListAsync();     base.OnNavigatedTo(e); } Windows Phone 7 supports only async calls to web services. When we added a reference to the dictionary service, asynchronous versions of all the functions were generated automatically. So in the above function we register a handler to the DictionaryListCompleted event which will occur when the call to DictionaryList() gets a response from the server. Then we call the DictionaryListAsynch() function which is the async version of the DictionaryList() api. The result of this api will be sent to the handler OnGetDictionaryListCompleted(), void OnGetDictionaryListCompleted(object sender, DictionaryListCompletedEventArgs e) {     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     Dictionary[] listOfDictionaries;     if (e.Error == null)     {         listOfDictionaries = e.Result;         PopulateListPicker(listOfDictionaries, settings);     }     else if (settings.Contains("SavedDictionaryList"))     {         listOfDictionaries = settings["SavedDictionaryList"] as Dictionary[];         PopulateListPicker(listOfDictionaries, settings);     }     else     {         MessageBoxResult res = MessageBox.Show("An error occured while retrieving dictionary list, do you want to try again?", "Error", MessageBoxButton.OKCancel);         if (MessageBoxResult.OK == res)         {             GetDictServiceSoapClient().DictionaryListAsync();         }     }     settings.Save(); } I have used IsolatedStorageSettings to store a few things; the entire dictionary list and the dictionary that is selected when the user exits the application, so that the next time when the user starts the application the current dictionary is set to the last selected value. First we check if the api returned any error, if the error object is null e.Result will contain the list (actually array) of Dictionary type objects. If there was an error, we check the isolated storage settings to see if there is a dictionary list stored from a previous instance of the application and if so, we populate the list picker based on this saved list. Note that in this case there are chances that the dictionary list might be out of date if there have been changes on the server. Finally, if none of these cases are true, we display an error message to the user and try to fetch the list again. PopulateListPicker() is passed the array of Dictionary objects and the settings object as well, void PopulateListPicker(Dictionary[] listOfDictionaries, IsolatedStorageSettings settings) {     listPickerDictionaryList.Items.Clear();     foreach (Dictionary dictionary in listOfDictionaries)     {         listPickerDictionaryList.Items.Add(dictionary.Name);     }     settings["SavedDictionaryList"] = listOfDictionaries;     string savedDictionaryName;     if (settings.Contains("SavedDictionary"))     {         savedDictionaryName = settings["SavedDictionary"] as string;     }     else     {         savedDictionaryName = "WordNet (r) 2.0"; //default dictionary, wordnet     }     foreach (string dictName in listPickerDictionaryList.Items)     {         if (dictName == savedDictionaryName)         {             listPickerDictionaryList.SelectedItem = dictName;             break;         }     }     settings["SavedDictionary"] = listPickerDictionaryList.SelectedItem as string; } We first clear all the items from the list picker, add the dictionary names from the array and then create a key in the settings called SavedDictionaryList and store the dictionary list in it. We then check if there is saved dictionary available from a previous instance, if there is, we set it as the selected item in the list picker. And if not, we set “WordNet ® 2.0” as the default dictionary. Before returning, we save the selected dictionary in the “SavedDictionary” key of the isolated storage settings. Fetching word definitions Getting this part done is very similar to the above code. We get the input word from the textbox, call into DefineInDictAsync() to fetch the definition and when DefineInDictAsync completes, we get the result and display it in the textblock. Here is the handler for the button click, private void OnButtonGoClick(object sender, RoutedEventArgs e) {     txtBlockWordMeaning.Text = "Please wait..";     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     if (txtboxInputWord.Text.Trim().Length <= 0)     {         MessageBox.Show("Please enter a word in the textbox and press 'Go'");     }     else     {         Dictionary[] listOfDictionaries = settings["SavedDictionaryList"] as Dictionary[];         string selectedDictionary = listPickerDictionaryList.SelectedItem.ToString();         string dictId = "wn"; //default dictionary is wordnet (wn is the dict id)         foreach (Dictionary dict in listOfDictionaries)         {             if (dict.Name == selectedDictionary)             {                 dictId = dict.Id;                 break;             }         }         DictServiceSoapClient client = GetDictServiceSoapClient();         client.DefineInDictCompleted += new EventHandler<DefineInDictCompletedEventArgs>(OnDefineInDictCompleted);         client.DefineInDictAsync(dictId, txtboxInputWord.Text.Trim());     } } We validate the input and then select the dictionary id based on the currently selected dictionary. We need the dictionary id because the api DefineInDict() expects the dictionary identifier and not the dictionary name. We could very well have stored the dictionary id in isolated storage settings too. Again, same as before, we register a event handler for the DefineInDictCompleted event and call the DefineInDictAsync() method passing in the dictionary id and the input word. void OnDefineInDictCompleted(object sender, DefineInDictCompletedEventArgs e) {     WordDefinition wd = e.Result;     scrollViewer.ScrollToVerticalOffset(0.0f);     if (wd.Definitions.Length == 0)     {         txtBlockWordMeaning.Text = String.Format("No definitions were found for '{0}' in '{1}'", txtboxInputWord.Text.Trim(), listPickerDictionaryList.SelectedItem.ToString().Trim());     }     else     {         foreach (Definition def in wd.Definitions)         {             string str = def.WordDefinition;             str = str.Replace("  ", " "); //some formatting             txtBlockWordMeaning.Text = str;         }     } } When the api completes, e.Result will contain a WordDefnition object. This class is also generated in the background while adding the service reference. We check the word definitions within this class to see if any results were returned, if not, we display a message to the user in the textblock. If a definition was found the text on the textblock is set to display the definition of the word. Adding final touches, we now need to save the current dictionary when the application exits. A small but useful thing is selecting the entire word in the input textbox when the user selects it. This makes sure that if the user has looked up a definition for a really long word, he doesn’t have to press ‘clear’ too many times to enter the next word, protected override void OnNavigatingFrom(System.Windows.Navigation.NavigatingCancelEventArgs e) {     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     settings["SavedDictionary"] = listPickerDictionaryList.SelectedItem as string;     settings.Save();     base.OnNavigatingFrom(e); } private void OnTextboxInputWordGotFocus(object sender, RoutedEventArgs e) {     TextBox txtbox = sender as TextBox;     if (txtbox.Text.Trim().Length > 0)     {         txtbox.SelectionStart = 0;         txtbox.SelectionLength = txtbox.Text.Length;     } } OnNavigatingFrom() is called whenever you navigate away from the MainPage, since our application contains only one page that would mean that it is exiting. I leave you with a short video of the application in action, but before that if you have any suggestions on how to make the code better and improve it please do leave a comment. Until next time…

  Read the article

• Stored Procedures with SSRS? Hmm… not so much

  - by Rob Farley

  Little Bobby Tables’ mother says you should always sanitise your data input. Except that I think she’s wrong. The SQL Injection aspect is for another post, where I’ll show you why I think SQL Injection is the same kind of attack as many other attacks, such as the old buffer overflow, but here I want to have a bit of a whinge about the way that some people sanitise data input, and even have a whinge about people who insist on using stored procedures for SSRS reports. Let me say that again, in case you missed it the first time: I want to have a whinge about people who insist on using stored procedures for SSRS reports. Let’s look at the data input sanitisation aspect – except that I’m going to call it ‘parameter validation’. I’m talking about code that looks like this: create procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     /* First check that @eomdate is a valid date */     if isdate(@eomdate) != 1     begin         select 'Please enter a valid date' as ErrorMessage;         return;     end     /* Then check that time has passed since @eomdate */     if datediff(day,@eomdate,sysdatetime()) < 5     begin         select 'Sorry - EOM is not complete yet' as ErrorMessage;         return;     end         /* If those checks have succeeded, return the data */     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where OrderDate >= dateadd(month,-1,@eomdate)         and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Notice that the code checks that a date has been entered. Seriously??!! This must only be to check for NULL values being passed in, because anything else would have to be a valid datetime to avoid an error. The other check is maybe fair enough, but I still don’t like it. The two problems I have with this stored procedure are the result sets and the small fact that the stored procedure even exists in the first place. But let’s consider the first one of these problems for starters. I’ll get to the second one in a moment. If you read Jes Borland (@grrl_geek)’s recent post about returning multiple result sets in Reporting Services, you’ll be aware that Reporting Services doesn’t support multiple results sets from a single query. And when it says ‘single query’, it includes ‘stored procedure call’. It’ll only handle the first result set that comes back. But that’s okay – we have RETURN statements, so our stored procedure will only ever return a single result set.  Sometimes that result set might contain a single field called ErrorMessage, but it’s still only one result set. Except that it’s not okay, because Reporting Services needs to know what fields to expect. Your report needs to hook into your fields, so SSRS needs to have a way to get that information. For stored procs, it uses an option called FMTONLY. When Reporting Services tries to figure out what fields are going to be returned by a query (or stored procedure call), it doesn’t want to have to run the whole thing. That could take ages. (Maybe it’s seen some of the stored procedures I’ve had to deal with over the years!) So it turns on FMTONLY before it makes the call (and turns it off again afterwards). FMTONLY is designed to be able to figure out the shape of the output, without actually running the contents. It’s very useful, you might think. set fmtonly on exec dbo.GetMonthSummaryPerSalesPerson '20030401'; set fmtonly off Without the FMTONLY lines, this stored procedure returns a result set that has three columns and fourteen rows. But with FMTONLY turned on, those rows don’t come back. But what I do get back hurts Reporting Services. It doesn’t run the stored procedure at all. It just looks for anything that could be returned and pushes out a result set in that shape. Despite the fact that I’ve made sure that the logic will only ever return a single result set, the FMTONLY option kills me by returning three of them. It would have been much better to push these checks down into the query itself. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Now if we run it with FMTONLY turned on, we get the single result set back. But let’s consider the execution plan when we pass in an invalid date. First let’s look at one that returns data. I’ve got a semi-useful index in place on OrderDate, which includes the SalesPersonID and TotalDue fields. It does the job, despite a hefty Sort operation. …compared to one that uses a future date: You might notice that the estimated costs are similar – the Index Seek is still 28%, the Sort is still 71%. But the size of that arrow coming out of the Index Seek is a whole bunch smaller. The coolest thing here is what’s going on with that Index Seek. Let’s look at some of the properties of it. Glance down it with me… Estimated CPU cost of 0.0005728, 387 estimated rows, estimated subtree cost of 0.0044385, ForceSeek false, Number of Executions 0. That’s right – it doesn’t run. So much for reading plans right-to-left... The key is the Filter on the left of it. It has a Startup Expression Predicate in it, which means that it doesn’t call anything further down the plan (to the right) if the predicate evaluates to false. Using this method, we can make sure that our stored procedure contains a single query, and therefore avoid any problems with multiple result sets. If we wanted, we could always use UNION ALL to make sure that we can return an appropriate error message. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, /*Placeholder: */ '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     /* Now include the error messages */     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5     order by SalesPersonID; end But still I don’t like it, because it’s now a stored procedure with a single query. And I don’t like stored procedures that should be functions. That’s right – I think this should be a function, and SSRS should call the function. And I apologise to those of you who are now planning a bonfire for me. Guy Fawkes’ night has already passed this year, so I think you miss out. (And I’m not going to remind you about when the PASS Summit is in 2012.) create function dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) returns table as return (     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5 ); We’ve had to lose the ORDER BY – but that’s fine, as that’s a client thing anyway. We can have our reports leverage this stored query still, but we’re recognising that it’s a query, not a procedure. A procedure is designed to DO stuff, not just return data. We even get entries in sys.columns that confirm what the shape of the result set actually is, which makes sense, because a table-valued function is the right mechanism to return data. And we get so much more flexibility with this. If you haven’t seen the simplification stuff that I’ve preached on before, jump over to http://bit.ly/SimpleRob and watch the video of when I broke a microphone and nearly fell off the stage in Wales. You’ll see the impact of being able to have a simplifiable query. You can also read the procedural functions post I wrote recently, if you didn’t follow the link from a few paragraphs ago. So if we want the list of SalesPeople that made any kind of sales in a given month, we can do something like: select SalesPersonID from dbo.GetMonthSummaryPerSalesPerson(@eomonth) order by SalesPersonID; This doesn’t need to look up the TotalDue field, which makes a simpler plan. select * from dbo.GetMonthSummaryPerSalesPerson(@eomonth) where SalesPersonID is not null order by SalesPersonID; This one can avoid having to do the work on the rows that don’t have a SalesPersonID value, pushing the predicate into the Index Seek rather than filtering the results that come back to the report. If we had joins involved, we might see some of those being simplified out. We also get the ability to include query hints in individual reports. We shift from having a single-use stored procedure to having a reusable stored query – and isn’t that one of the main points of modularisation? Stored procedures in Reporting Services are just a bit limited for my liking. They’re useful in plenty of ways, but if you insist on using stored procedures all the time rather that queries that use functions – that’s rubbish. @rob_farley

  Read the article

• NoSQL with MongoDB, NoRM and ASP.NET MVC - Part 2

  - by shiju

   In my last post, I have given an introduction to MongoDB and NoRM using an ASP.NET MVC demo app. I have updated the demo ASP.NET MVC app and a created a new drop at codeplex. You can download the demo at http://mongomvc.codeplex.com/In my last post, we have discussed to doing basic CRUD operations against a simple domain entity. In this post, let’s discuss on domain entity with deep object graph.The below is our domain entities  public class Category {       [MongoIdentifier]     public ObjectId Id { get; set; }       [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public List<Expense> Expenses { get; set; }       public Category()     {         Expenses = new List<Expense>();     } }    public class Expense {     [MongoIdentifier]     public ObjectId Id { get; set; }     public Category Category { get; set; }     public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }   }   We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category.The MongoSession class  internal class MongoSession : IDisposable {     private readonly MongoQueryProvider provider;       public MongoSession()     {         this.provider = new MongoQueryProvider("Expense");     }       public IQueryable<Category> Categories     {         get { return new MongoQuery<Category>(this.provider); }     }     public IQueryable<Expense> Expenses     {         get { return new MongoQuery<Expense>(this.provider); }     }     public MongoQueryProvider Provider     {         get { return this.provider; }     }       public void Add<T>(T item) where T : class, new()     {         this.provider.DB.GetCollection<T>().Insert(item);     }       public void Dispose()     {         this.provider.Server.Dispose();     }     public void Delete<T>(T item) where T : class, new()     {         this.provider.DB.GetCollection<T>().Delete(item);     }       public void Drop<T>()     {         this.provider.DB.DropCollection(typeof(T).Name);     }       public void Save<T>(T item) where T : class,new()     {         this.provider.DB.GetCollection<T>().Save(item);                }     }     ASP.NET MVC view model  for Expense transaction  public class ExpenseViewModel {     public ObjectId Id { get; set; }       public ObjectId CategoryId { get; set; }       [Required(ErrorMessage = "Transaction Required")]            public string Transaction { get; set; }       [Required(ErrorMessage = "Date Required")]            public DateTime Date { get; set; }       [Required(ErrorMessage = "Amount Required")]        public double Amount { get; set; }       public IEnumerable<SelectListItem> Category { get; set; } }  Let's create action method for Insert and Update a expense transaction   [HttpPost] public ActionResult Save(ExpenseViewModel expenseViewModel) {     try     {         if (!ModelState.IsValid)         {             using (var session = new MongoSession())             {                 var categories = session.Categories.AsEnumerable<Category>();                 expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId);                }             return View("Save", expenseViewModel);         }           var expense=new Expense();         ModelCopier.CopyModel(expenseViewModel, expense);           using (var session = new MongoSession())         {             ObjectId Id = expenseViewModel.CategoryId;             var category = session.Categories                 .Where(c => c.Id ==Id  )                 .FirstOrDefault();             expense.Category = category;             session.Save(expense);         }         return RedirectToAction("Index");     }     catch     {         return View();     } } Query with Expenses  using (var session = new MongoSession()) {     var expenses = session.Expenses.         Where(exp => exp.Date >= StartDate && exp.Date <= EndDate)         .AsEnumerable<Expense>(); }  We are doing a LINQ query expression with a Date filter. We can easily work with MongoDB using NoRM driver and can managing object graph of domain entities are pretty cool. Download the Source - You can download the source code form http://mongomvc.codeplex.com

  Read the article

• URL Rewrite – Protocol (http/https) in the Action

  - by OWScott

  IIS URL Rewrite supports server variables for pretty much every part of the URL and http header. However, there is one commonly used server variable that isn’t readily available.  That’s the protocol—HTTP or HTTPS. You can easily check if a page request uses HTTP or HTTPS, but that only works in the conditions part of the rule.  There isn’t a variable available to dynamically set the protocol in the action part of the rule.  What I wish is that there would be a variable like {HTTP_PROTOCOL} which would have a value of ‘HTTP’ or ‘HTTPS’.  There is a server variable called {HTTPS}, but the values of ‘on’ and ‘off’ aren’t practical in the action.  You can also use {SERVER_PORT} or {SERVER_PORT_SECURE}, but again, they aren’t useful in the action. Let me illustrate.  The following rule will redirect traffic for http(s)://localtest.me/ to http://www.localtest.me/. <rule name="Redirect to www"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> The problem is that it forces the request to HTTP even if the original request was for HTTPS. Interestingly enough, I planned to blog about this topic this week when I noticed in my twitter feed yesterday that Jeff Graves, a former colleague of mine, just wrote an excellent blog post about this very topic.  He beat me to the punch by just a couple days.  However, I figured I would still write my blog post on this topic.  While his solution is a excellent one, I personally handle this another way most of the time.  Plus, it’s a commonly asked question that isn’t documented well enough on the web yet, so having another article on the web won’t hurt. I can think of four different ways to handle this, and depending on your situation you may lean towards any of the four.  Don’t let the choices overwhelm you though.  Let’s keep it simple, Option 1 is what I use most of the time, Option 2 is what Jeff proposed and is the safest option, and Option 3 and Option 4 need only be considered if you have a more unique situation.  All four options will work for most situations. Option 1 – CACHE_URL, single rule There is a server variable that has the protocol in it; {CACHE_URL}.  This server variable contains the entire URL string (e.g. http://www.localtest.me:80/info.aspx?id=5)  All we need to do is extract the HTTP or HTTPS and we’ll be set. This tends to be my preferred way to handle this situation. Indeed, Jeff did briefly mention this in his blog post: … you could use a condition on the CACHE_URL variable and a back reference in the rewritten URL. The problem there is that you then need to match all of the conditions which could be a problem if your rule depends on a logical “or” match for conditions. Thus the problem.  If you have multiple conditions set to “Match Any” rather than “Match All” then this option won’t work.  However, I find that 95% of all rules that I write use “Match All” and therefore, being the lazy administrator that I am I like this simple solution that only requires adding a single condition to a rule.  The caveat is that if you use “Match Any” then you must consider one of the next two options. Enough with the preamble.  Here’s how it works.  Add a condition that checks for {CACHE_URL} with a pattern of “^(.+)://” like so: How you have a back-reference to the part before the ://, which is our treasured HTTP or HTTPS.  In URL Rewrite 2.0 or greater you can check the “Track capture groups across conditions”, make that condition the first condition, and you have yourself a back-reference of {C:1}. The “Redirect to www” example with support for maintaining the protocol, will become: <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="true"> <add input="{CACHE_URL}" pattern="^(.+)://" /> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{C:1}://www.localtest.me/{R:1}" /> </rule> It’s not as easy as it would be if Microsoft gave us a built-in {HTTP_PROTOCOL} variable, but it’s pretty close. I also like this option since I often create rule examples for other people and this type of rule is portable since it’s self-contained within a single rule. Option 2 – Using a Rewrite Map For a safer rule that works for both “Match Any” and “Match All” situations, you can use the Rewrite Map solution that Jeff proposed.  It’s a perfectly good solution with the only drawback being the ever so slight extra effort to set it up since you need to create a rewrite map before you create the rule.  In other words, if you choose to use this as your sole method of handling the protocol, you’ll be safe. After you create a Rewrite Map called MapProtocol, you can use “{MapProtocol:{HTTPS}}” for the protocol within any rule action.  Following is an example using a Rewrite Map. <rewrite> <rules> <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{MapProtocol:{HTTPS}}://www.localtest.me/{R:1}" /> </rule> </rules> <rewriteMaps> <rewriteMap name="MapProtocol"> <add key="on" value="https" /> <add key="off" value="http" /> </rewriteMap> </rewriteMaps> </rewrite> Option 3 – CACHE_URL, Multi-rule If you have many rules that will use the protocol, you can create your own server variable which can be used in subsequent rules. This option is no easier to set up than Option 2 above, but you can use it if you prefer the easier to remember syntax of {HTTP_PROTOCOL} vs. {MapProtocol:{HTTPS}}. The potential issue with this rule is that if you don’t have access to the server level (e.g. in a shared environment) then you cannot set server variables without permission. First, create a rule and place it at the top of the set of rules.  You can create this at the server, site or subfolder level.  However, if you create it at the site or subfolder level then the HTTP_PROTOCOL server variable needs to be approved at the server level.  This can be achieved in IIS Manager by navigating to URL Rewrite at the server level, clicking on “View Server Variables” from the Actions pane, and added HTTP_PROTOCOL. If you create the rule at the server level then this step is not necessary.  Following is an example of the first rule to create the HTTP_PROTOCOL and then a rule that uses it.  The Create HTTP_PROTOCOL rule only needs to be created once on the server. <rule name="Create HTTP_PROTOCOL"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{CACHE_URL}" pattern="^(.+)://" /> </conditions> <serverVariables> <set name="HTTP_PROTOCOL" value="{C:1}" /> </serverVariables> <action type="None" /> </rule>   <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{HTTP_PROTOCOL}://www.localtest.me/{R:1}" /> </rule> Option 4 – Multi-rule Just to be complete I’ll include an example of how to achieve the same thing with multiple rules. I don’t see any reason to use it over the previous examples, but I’ll include an example anyway.  Note that it will only work with the “Match All” setting for the conditions. <rule name="Redirect to www - http" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="off" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> <rule name="Redirect to www - https" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="on" /> </conditions> <action type="Redirect" url="https://www.localtest.me/{R:1}" /> </rule> Conclusion Above are four working examples of methods to call the protocol (HTTP or HTTPS) from the action of a URL Rewrite rule.  You can use whichever method you most prefer.  I’ve listed them in the order that I favor them, although I could see some people preferring Option 2 as their first choice.  In any of the cases, hopefully you can use this as a reference for when you need to use the protocol in the rule’s action when writing your URL Rewrite rules. Further information: Viewing all Server Variable for a site. URL Parts available to URL Rewrite Rules Further URL Rewrite articles

  Read the article

• Using the Data Form Web Part (SharePoint 2010) Site Agnostically!

  - by David Jacobus

  Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/24/154465.aspxAs a Developer whom has worked closely with web designers (Power users) in a SharePoint environment, I have come across the issue of making the Data Form Web Part reusable across the site collection! In SharePoint 2007 it was very easy and this blog pointed the way to make it happen: Josh Gaffey's Blog. In SharePoint 2010 something changed! This method failed except for using a Data Form Web Part that pointed to a list in the Site Collection Root! I am making this discussion relative to a developer whom creates a solution (WSP) with all the artifacts embedded and the user shouldn’t have any involvement in the process except to activate features. The Scenario: 1. A Power User creates a Data Form Web Part using SharePoint Designer 2010! It is a great web part the uses all the power of SharePoint Designer and XSLT (Conditional formatting, etc.). 2. Other Users in the site collection want to use that specific web part in sub sites in the site collection. Pointing to a list with the same name, not at the site collection root! The Issues: 1. The Data Form Web Part Data Source uses a List ID (GUID) to point to the specific list. Which means a list in a sub site will have a list with a new GUID different than the one which was created with SharePoint Designer! Obviously, the List needs to be the same List (Fields, Content Types, etc.) with different data. 2. How can we make this web part site agnostic, and dependent only on the lists Name? I had this problem come up over and over and decided to put my solution forward! The Solution: 1. Use the XSL of the Data Form Web Part Created By the Power User in SharePoint Designer! 2. Extend the OOTB Data Form Web Part to use this XSL and Point to a List by name. The solution points to a hybrid solution that requires some coding (Developer) and the XSL (Power User) artifacts put together in a Visual Studio SharePoint Solution. Here are the solution steps in summary: 1. Create an empty SharePoint project in Visual Studio 2. Create a Module and Feature and put the XSL file created by the Power User into it a. Scope the feature to web 3. Create a Feature Receiver to Create the List. The same list from which the Data Form Web Part was created with by the Power User. a. Scope the feature to web 4. Create a Web Part extending the Data Form Web a. Point the Data Form Web Part to point to the List by Name b. Point the Data Form Web Part XSL link to the XSL added using the Module feature c. Scope The feature to Site i. This is because all web parts are in the site collection web part gallery. So in a Narrative Summary: We are creating a list in code which has the same name and (site Columns) as the list from which the Power User created the Data Form Web Part Using SharePoint Designer. We are creating a Web Part in code which extends the OOTB Data Form Web Part to point to a list by name and use the XSL created by the Power User. Okay! Here are the steps with images and code! At the end of this post I will provide a link to the code for a solution which works in any site! I want to TOOT the HORN for the power of this solution! It is the mantra a use with all my clients! What is a basic skill a SharePoint Developer: Create an application that uses the data from a SharePoint list and make that data visible to the user in a manner which meets requirements! Create an Empty SharePoint 2010 Project Here I am naming my Project DJ.DataFormWebPart Create a Code Folder Copy and paste the Extension and Utilities classes (Found in the solution provided at the end of this post) Change the Namespace to match this project The List to which the Data Form Web Part which was used to make the XSL by the Power User in SharePoint Designer is now going to be created in code! If already in code, then all the better! Here I am going to create a list in the site collection root and add some data to it! For the purpose of this discussion I will actually create this list in code before using SharePoint Designer for simplicity! So here I create the List and deploy it within this solution before I do anything else. I will use a List I created before for demo purposes. Footer List is used within the footer of my master page. Add a new Feature: Here I name the Feature FooterList and add a Feature Event Receiver: Here is the code for the Event Receiver: I have a previous blog post about adding lists in code so I will not take time to narrate this code: using System; using System.Runtime.InteropServices; using System.Security.Permissions; using Microsoft.SharePoint; using DJ.DataFormWebPart.Code; namespace DJ.DataFormWebPart.Features.FooterList { /// <summary> /// This class handles events raised during feature activation, deactivation, installation, uninstallation, and upgrade. /// </summary> /// <remarks> /// The GUID attached to this class may be used during packaging and should not be modified. /// </remarks> [Guid("a58644fd-9209-41f4-aa16-67a53af7a9bf")] public class FooterListEventReceiver : SPFeatureReceiver { SPWeb currentWeb = null; SPSite currentSite = null; const string columnGroup = "DJ"; const string ctName = "FooterContentType"; // Uncomment the method below to handle the event raised after a feature has been activated. public override void FeatureActivated(SPFeatureReceiverProperties properties) { using (SPWeb spWeb = properties.GetWeb() as SPWeb) { using (SPSite site = new SPSite(spWeb.Site.ID)) { using (SPWeb rootWeb = site.OpenWeb(site.RootWeb.ID)) { //add the fields addFields(rootWeb); //add content type SPContentType testCT = rootWeb.ContentTypes[ctName]; // we will not create the content type if it exists if (testCT == null) { //the content type does not exist add it addContentType(rootWeb, ctName); } if ((spWeb.Lists.TryGetList("FooterList") == null)) { //create the list if it dosen't to exist CreateFooterList(spWeb, site); } } } } } #region ContentType public void addFields(SPWeb spWeb) { Utilities.addField(spWeb, "Link", SPFieldType.URL, false, columnGroup); Utilities.addField(spWeb, "Information", SPFieldType.Text, false, columnGroup); } private static void addContentType(SPWeb spWeb, string name) { SPContentType myContentType = new SPContentType(spWeb.ContentTypes["Item"], spWeb.ContentTypes, name) { Group = columnGroup }; spWeb.ContentTypes.Add(myContentType); addContentTypeLinkages(spWeb, myContentType); myContentType.Update(); } public static void addContentTypeLinkages(SPWeb spWeb, SPContentType ct) { Utilities.addContentTypeLink(spWeb, "Link", ct); Utilities.addContentTypeLink(spWeb, "Information", ct); } private void CreateFooterList(SPWeb web, SPSite site) { Guid newListGuid = web.Lists.Add("FooterList", "Footer List", SPListTemplateType.GenericList); SPList newList = web.Lists[newListGuid]; newList.ContentTypesEnabled = true; var footer = site.RootWeb.ContentTypes[ctName]; newList.ContentTypes.Add(footer); newList.ContentTypes.Delete(newList.ContentTypes["Item"].Id); newList.Update(); var view = newList.DefaultView; //add all view fields here //view.ViewFields.Add("NewsTitle"); view.ViewFields.Add("Link"); view.ViewFields.Add("Information"); view.Update(); } } } Basically created a content type with two site columns Link and Information. I had to change some code as we are working at the SPWeb level and need Content Types at the SPSite level! I’ll use a new Site Collection for this demo (Best Practice) keep old artifacts from impinging on development: Next we will add this list to the root of the site collection by deploying this solution, add some data and then use SharePoint Designer to create a Data Form Web Part. The list has been added, now let’s add some data: Okay let’s add a Data Form Web Part in SharePoint Designer. Create a new web part page in the site pages library: I will name it TestWP.aspx and edit it in advanced mode: Let’s add an empty Data Form Web Part to the web part zone: Click on the web part to add a data source: Choose FooterList in the Data Source menu: Choose appropriate fields and select insert as multiple item view: Here is what it look like after insertion: Let’s add some conditional formatting if the information filed is not blank: Choose Create (right side) apply formatting: Choose the Information Field and set the condition not null: Click Set Style: Here is the result: Okay! Not flashy but simple enough for this demo. Remember this is the job of the Power user! All we want from this web part is the XLS-Style Sheet out of SharePoint Designer. We are going to use it as the XSL for our web part which we will be creating next. Let’s add a web part to our project extending the OOTB Data Form Web Part. Add new item from the Visual Studio add menu: Choose Web Part: Change WebPart to DataFormWebPart (Oh well my namespace needs some improvement, but it will sure make it readily identifiable as an extended web part!) Below is the code for this web part: using System; using System.ComponentModel; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using Microsoft.SharePoint; using Microsoft.SharePoint.WebControls; using System.Text; namespace DJ.DataFormWebPart.DataFormWebPart { [ToolboxItemAttribute(false)] public class DataFormWebPart : Microsoft.SharePoint.WebPartPages.DataFormWebPart { protected override void OnInit(EventArgs e) { base.OnInit(e); this.ChromeType = PartChromeType.None; this.Title = "FooterListDF"; try { //SPSite site = SPContext.Current.Site; SPWeb web = SPContext.Current.Web; SPList list = web.Lists.TryGetList("FooterList"); if (list != null) { string queryList1 = "<Query><Where><IsNotNull><FieldRef Name='Title' /></IsNotNull></Where><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy></Query>"; uint maximumRowList1 = 10; SPDataSource dataSourceList1 = GetDataSource(list.Title, web.Url, list, queryList1, maximumRowList1); this.DataSources.Add(dataSourceList1); this.XslLink = web.Url + "/Assests/Footer.xsl"; this.ParameterBindings = BuildDataFormParameters(); this.DataBind(); } } catch (Exception ex) { this.Controls.Add(new LiteralControl("ERROR: " + ex.Message)); } } private SPDataSource GetDataSource(string dataSourceId, string webUrl, SPList list, string query, uint maximumRow) { SPDataSource dataSource = new SPDataSource(); dataSource.UseInternalName = true; dataSource.ID = dataSourceId; dataSource.DataSourceMode = SPDataSourceMode.List; dataSource.List = list; dataSource.SelectCommand = "" + query + ""; Parameter listIdParam = new Parameter("ListID"); listIdParam.DefaultValue = list.ID.ToString( "B").ToUpper(); Parameter maximumRowsParam = new Parameter("MaximumRows"); maximumRowsParam.DefaultValue = maximumRow.ToString(); QueryStringParameter rootFolderParam = new QueryStringParameter("RootFolder", "RootFolder"); dataSource.SelectParameters.Add(listIdParam); dataSource.SelectParameters.Add(maximumRowsParam); dataSource.SelectParameters.Add(rootFolderParam); dataSource.UpdateParameters.Add(listIdParam); dataSource.DeleteParameters.Add(listIdParam); dataSource.InsertParameters.Add(listIdParam); return dataSource; } private string BuildDataFormParameters() { StringBuilder parameters = new StringBuilder("<ParameterBindings><ParameterBinding Name=\"dvt_apos\" Location=\"Postback;Connection\"/><ParameterBinding Name=\"UserID\" Location=\"CAMLVariable\" DefaultValue=\"CurrentUserName\"/><ParameterBinding Name=\"Today\" Location=\"CAMLVariable\" DefaultValue=\"CurrentDate\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_firstrow\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_nextpagedata\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocmode\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocfiltermode\" Location=\"Postback;Connection\"/>"); parameters.Append("</ParameterBindings>"); return parameters.ToString(); } } } The OnInit method we use to set the list name and the XSL Link property of the Data Form Web Part. We do not have the link to XSL in our Solution so we will add the XSL now: Add a Module in the Visual Studio add menu: Rename Sample.txt in the module to footer.xsl and then copy the XSL from SharePoint Designer Look at elements.xml to where the footer.xsl is being provisioned to which is Assets/footer.xsl, make sure the Web parts xsl link is pointing to this url: Okay we are good to go! Let’s check our features and package: DataFormWebPart should be scoped to site and have the web part: The Footer List feature should be scoped to web and have the Assets module (Okay, I see, a spelling issue but it won’t affect this demo) If everything is correct we should be able to click a couple of sub site feature activations and have our list and web part in a sub site. (In fact this solution can be activated anywhere) Here is the list created at SubSite1 with new data It. Next let’s add the web part on a test page and see if it works as expected: It does! So we now have a repeatable way to use a WSP to move a Data Form Web Part around our sites! Here is a link to the code: DataFormWebPart Solution

  Read the article

• NerdDinner form validation DataAnnotations ERROR in MVC2 when a form field is left blank.

  - by Edward Burns

  Platform: Windows 7 Ultimate IDE: Visual Studio 2010 Ultimate Web Environment: ASP.NET MVC 2 Database: SQL Server 2008 R2 Express Data Access: Entity Framework 4 Form Validation: DataAnnotations Sample App: NerdDinner from Wrox Pro ASP.NET MVC 2 Book: Wrox Professional MVC 2 Problem with Chapter 1 - Section: "Integrating Validation and Business Rule Logic with Model Classes" (pages 33 to 35) ERROR Synopsis: NerdDinner form validation ERROR with DataAnnotations and db nulls. DataAnnotations in sample code does not work when the database fields are set to not allow nulls. ERROR occurs with the code from the book and with the sample code downloaded from codeplex. Help! I'm really frustrated by this!! I can't believe something so simple just doesn't work??? Steps to reproduce ERROR: Set Database fields to not allow NULLs (See Picture) Set NerdDinnerEntityModel Dinner class fields' Nullable property to false (See Picture) Add DataAnnotations for Dinner_Validation class (CODE A) Create Dinner repository class (CODE B) Add CREATE action to DinnerController (CODE C) This is blank form before posting (See Picture) This null ERROR occurs when posting a blank form which should be intercepted by the Dinner_Validation class DataAnnotations. Note ERROR message says that "This property cannot be set to a null value. WTH??? (See Picture) The next ERROR occurs during the edit process. Here is the Edit controller action (CODE D) This is the "Edit" form with intentionally wrong input to test Dinner Validation DataAnnotations (See Picture) The ERROR occurs again when posting the edit form with blank form fields. The post request should be intercepted by the Dinner_Validation class DataAnnotations. Same null entry error. WTH??? (See Picture) See screen shots at: http://www.intermedia4web.com/temp/nerdDinner/StackOverflowNerdDinnerQuestionshort.png CODE A: [MetadataType(typeof(Dinner_Validation))] public partial class Dinner { } [Bind(Include = "Title, EventDate, Description, Address, Country, ContactPhone, Latitude, Longitude")] public class Dinner_Validation { [Required(ErrorMessage = "Title is required")] [StringLength(50, ErrorMessage = "Title may not be longer than 50 characters")] public string Title { get; set; } [Required(ErrorMessage = "Description is required")] [StringLength(265, ErrorMessage = "Description must be 256 characters or less")] public string Description { get; set; } [Required(ErrorMessage="Event date is required")] public DateTime EventDate { get; set; } [Required(ErrorMessage = "Address is required")] public string Address { get; set; } [Required(ErrorMessage = "Country is required")] public string Country { get; set; } [Required(ErrorMessage = "Contact phone is required")] public string ContactPhone { get; set; } [Required(ErrorMessage = "Latitude is required")] public double Latitude { get; set; } [Required(ErrorMessage = "Longitude is required")] public double Longitude { get; set; } } CODE B: public class DinnerRepository { private NerdDinnerEntities _NerdDinnerEntity = new NerdDinnerEntities(); // Query Method public IQueryable<Dinner> FindAllDinners() { return _NerdDinnerEntity.Dinners; } // Query Method public IQueryable<Dinner> FindUpcomingDinners() { return from dinner in _NerdDinnerEntity.Dinners where dinner.EventDate > DateTime.Now orderby dinner.EventDate select dinner; } // Query Method public Dinner GetDinner(int id) { return _NerdDinnerEntity.Dinners.FirstOrDefault(d => d.DinnerID == id); } // Insert Method public void Add(Dinner dinner) { _NerdDinnerEntity.Dinners.AddObject(dinner); } // Delete Method public void Delete(Dinner dinner) { foreach (var rsvp in dinner.RSVPs) { _NerdDinnerEntity.RSVPs.DeleteObject(rsvp); } _NerdDinnerEntity.Dinners.DeleteObject(dinner); } // Persistence Method public void Save() { _NerdDinnerEntity.SaveChanges(); } } CODE C: // ************************************** // GET: /Dinners/Create/ // ************************************** public ActionResult Create() { Dinner dinner = new Dinner() { EventDate = DateTime.Now.AddDays(7) }; return View(dinner); } // ************************************** // POST: /Dinners/Create/ // ************************************** [HttpPost] public ActionResult Create(Dinner dinner) { if (ModelState.IsValid) { dinner.HostedBy = "The Code Dude"; _dinnerRepository.Add(dinner); _dinnerRepository.Save(); return RedirectToAction("Details", new { id = dinner.DinnerID }); } else { return View(dinner); } } CODE D: // ************************************** // GET: /Dinners/Edit/{id} // ************************************** public ActionResult Edit(int id) { Dinner dinner = _dinnerRepository.GetDinner(id); return View(dinner); } // ************************************** // POST: /Dinners/Edit/{id} // ************************************** [HttpPost] public ActionResult Edit(int id, FormCollection formValues) { Dinner dinner = _dinnerRepository.GetDinner(id); if (TryUpdateModel(dinner)){ _dinnerRepository.Save(); return RedirectToAction("Details", new { id=dinner.DinnerID }); } return View(dinner); } I have sent Wrox and one of the authors a request for help but have not heard back from anyone. Readers of the book cannot even continue to finish the rest of chapter 1 because of these errors. Even if I download the latest build from Codeplex, it still has the same errors. Can someone please help me and tell me what needs to be fixed? Thanks - Ed.

  Read the article

• Binding data to subgrid

  - by bhargav

  i have a jqgrid with a subgrid...the databinding is done in javascript like this <script language="javascript" type="text/javascript"> var x = screen.width; $(document).ready(function () { $("#projgrid").jqGrid({ mtype: 'POST', datatype: function (pdata) { getData(pdata); }, colNames: ['Project ID', 'Due Date', 'Project Name', 'SalesRep', 'Organization:', 'Status', 'Active Value', 'Delete'], colModel: [ { name: 'Project ID', index: 'project_id', width: 12, align: 'left', key: true }, { name: 'Due Date', index: 'project_date_display', width: 15, align: 'left' }, { name: 'Project Name', index: 'project_title', width: 60, align: 'left' }, { name: 'SalesRep', index: 'Salesrep', width: 22, align: 'left' }, { name: 'Organization:', index: 'customer_company_name:', width: 56, align: 'left' }, { name: 'Status', index: 'Status', align: 'left', width: 15 }, { name: 'Active Value', index: 'Active Value', align: 'left', width: 10 }, { name: 'Delete', index: 'Delete', align: 'left', width: 10}], pager: '#proj_pager', rowList: [10, 20, 50], sortname: 'project_id', sortorder: 'asc', rowNum: 10, loadtext: "Loading....", subGrid: true, shrinkToFit: true, emptyrecords: "No records to view", width: x - 100, height: "100%", rownumbers: true, caption: 'Projects', subGridRowExpanded: function (subgrid_id, row_id) { var subgrid_table_id, pager_id; subgrid_table_id = subgrid_id + "_t"; pager_id = "p_" + subgrid_table_id; $("#" + subgrid_id).html("<table id='" + subgrid_table_id + "' class='scroll'></table><div id='" + pager_id + "' class='scroll'></div>"); jQuery("#" + subgrid_table_id).jqGrid({ mtype: 'POST', postData: { entityIndex: function () { return row_id } }, datatype: function (pdata) { getactionData(pdata); }, height: "100%", colNames: ['Event ID', 'Priority', 'Deadline', 'From Date', 'Title', 'Status', 'Hours', 'Contact From', 'Contact To'], colModel: [ { name: 'Event ID', index: 'Event ID' }, { name: 'Priority', index: 'IssueCode' }, { name: 'Deadline', index: 'IssueTitle' }, { name: 'From Date', index: 'From Date' }, { name: 'Title', index: 'Title' }, { name: 'Status', index: 'Status' }, { name: 'Hours', index: 'Hours' }, { name: 'Contact From', index: 'Contact From' }, { name: 'Contact To', index: 'Contact To' } ], caption: "Action Details", rowNum: 10, pager: '#actionpager', rowList: [10, 20, 30, 50], sortname: 'Event ID', sortorder: "desc", loadtext: "Loading....", shrinkToFit: true, emptyrecords: "No records to view", rownumbers: true, ondblClickRow: function (rowid) { } }); jQuery("#actiongrid").jqGrid('navGrid', '#actionpager', { edit: false, add: false, del: false, search: false }); } }); jQuery("#projgrid").jqGrid('navGrid', '#proj_pager', { edit: false, add: false, del: false, excel: true, search: false }); }); function getactionData(pdata) { var project_id = pdata.entityIndex(); var ChannelContact = document.getElementById('ctl00_ContentPlaceHolder2_ddlChannelContact').value; var HideCompleted = document.getElementById('ctl00_ContentPlaceHolder2_chkHideCompleted').checked; var Scm = document.getElementById('ctl00_ContentPlaceHolder2_chkScm').checked; var checkOnlyContact = document.getElementById('ctl00_ContentPlaceHolder2_chkOnlyContact').checked; var MerchantId = document.getElementById('ctl00_ContentPlaceHolder2_ucProjectDetail_hidden_MerchantId').value; var nrows = pdata.rows; var npage = pdata.page; var sortindex = pdata.sidx; var sortdir = pdata.sord; var path = "project_brow.aspx/GetActionDetails" $.ajax({ type: "POST", url: path, data: "{'project_id': '" + project_id + "','ChannelContact': '" + ChannelContact + "','HideCompleted': '" + HideCompleted + "','Scm': '" + Scm + "','checkOnlyContact': '" + checkOnlyContact + "','MerchantId': '" + MerchantId + "','nrows': '" + nrows + "','npage': '" + npage + "','sortindex': '" + sortindex + "','sortdir': '" + sortdir + "'}", contentType: "application/json; charset=utf-8", success: function (data, textStatus) { if (textStatus == "success") obj = jQuery.parseJSON(data.d) ReceivedData(obj); }, error: function (data, textStatus) { alert('An error has occured retrieving data!'); } }); } function ReceivedData(data) { var thegrid = jQuery("#actiongrid")[0]; thegrid.addJSONData(data); } function getData(pData) { var dtDateFrom = document.getElementById('ctl00_ContentPlaceHolder2_dtDateFrom_textBox').value; var dtDateTo = document.getElementById('ctl00_ContentPlaceHolder2_dtDateTo_textBox').value; var Status = document.getElementById('ctl00_ContentPlaceHolder2_ddlStatus').value; var Type = document.getElementById('ctl00_ContentPlaceHolder2_ddlType').value; var Channel = document.getElementById('ctl00_ContentPlaceHolder2_ddlChannel').value; var ChannelContact = document.getElementById('ctl00_ContentPlaceHolder2_ddlChannelContact').value; var Customers = document.getElementById('ctl00_ContentPlaceHolder2_txtCustomers').value; var KeywordSearch = document.getElementById('ctl00_ContentPlaceHolder2_txtKeywordSearch').value; var Scm = document.getElementById('ctl00_ContentPlaceHolder2_chkScm').checked; var HideCompleted = document.getElementById('ctl00_ContentPlaceHolder2_chkHideCompleted').checked; var SelectedCustomerId = document.getElementById("<%=hdnSelectedCustomerId.ClientID %>").value var MerchantId = document.getElementById('ctl00_ContentPlaceHolder2_ucProjectDetail_hidden_MerchantId').value; var nrows = pData.rows; var npage = pData.page; var sortindex = pData.sidx; var sortdir = pData.sord; PageMethods.GetProjectDetails(SelectedCustomerId, Customers, KeywordSearch, MerchantId, Channel, Status, Type, dtDateTo, dtDateFrom, ChannelContact, HideCompleted, Scm, nrows, npage, sortindex, sortdir, AjaxSucceeded, AjaxFailed); } function AjaxSucceeded(data) { var obj = jQuery.parseJSON(data) if (obj != null) { if (obj.records!="") { ReceivedClientData(obj); } else { alert('No Data Available to Display') } } } function AjaxFailed(data) { alert('An error has occured retrieving data!'); } function ReceivedClientData(data) { var thegrid = jQuery("#projgrid")[0]; thegrid.addJSONData(data); } </script> as u can see projgrid is my parent grid and action grid is my subgrid to be shown onclicking the '+' symbol Projgrid is binded and being displayed but when it comes to subgrid im able to get the data but the problem comes at the time of binding data to subgrid which is done in function named ReceivedData where you can see like this function ReceivedData(data) { var thegrid = jQuery("#actiongrid")[0]; thegrid.addJSONData(data); } "data" is what i wanted exactly but it cannot be binded to actiongrid which is the subgrid Thanx in advance for help

  Read the article

• http request to cgi python script successful, but the script doesn't seem to run

  - by chipChocolate.py

  I have configured cgi scripts for my apache2 web server. Here is what I want to do: Client uploads the image to the server. (this already works) On success, I want to execute the python script to resize the image. I tried the following and the success function does execute but my python script does not seem to execute: Javascript code that sends the request: var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; if(file != undefined){ formData= new FormData(); console.log(formData.length); if(!!file.type.match(/image.*/)){ formData.append("image", file); $.ajax({ url: "upload.php", type: "POST", processData: false, contentType: false, success: function() { var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; formData = new FormData(); formData.append("filename", file); $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, processData: false, contentType: false, success: function(data) { console.log(data); } }); // code continues... resize.py: #!/usr/bin/python import cgi import cgitb import Image cgitb.enable() data = cgi.FieldStorage() filename = data.getvalue("filename") im = Image.open("../JS/upload/" + filename) (width, height) = im.size maxWidth = 600 maxHeight = 400 if width > maxWidth: d = float(width) / maxWidth height = int(height / d) width = maxWidth if height > maxHeight: d = float(height) / maxHeight width = int(width / d) height = maxHeight size = (width, height) im = im.resize(size, Image.ANTIALIAS) im.save("../JS/upload/" + filename, quality=100) This is the apache2.conf: <Directory /var/www/html/Main/cgi-bin> AllowOverride None Options +ExecCGI SetHandler cgi-script AddHandler cgi-script .py .cgi Order allow,deny Allow from all </Directory> cgi-bin and python script file permissions: drwxrwxr-x 2 mou mou 4096 Aug 24 03:28 cgi-bin -rwxrwxrwx 1 mou mou 1673 Aug 24 03:28 resize.py Edit: Executing this code $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, // formData = {"filename" : "the filename which was saved in a variable whie the image was uploaded"} processData: false, contentType: false, success: function(data) { alert(data); } }); it alerts the following: <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> --> </font> </font> </font> </script> </object> </blockquote> </pre> </table> </table> </table> </table> </table> </font> </font> </font><body bgcolor="#f0f0f8"> <table width="100%" cellspacing=0 cellpadding=2 border=0 summary="heading"> <tr bgcolor="#6622aa"> <td valign=bottom>&nbsp;<br> <font color="#ffffff" face="helvetica, arial">&nbsp;<br><big><big><strong>&lt;type 'exceptions.TypeError'&gt;</strong></big></big></font></td ><td align=right valign=bottom ><font color="#ffffff" face="helvetica, arial">Python 2.7.6: /usr/bin/python<br>Sun Aug 24 17:24:15 2014</font></td></tr></table> <p>A problem occurred in a Python script. Here is the sequence of function calls leading up to the error, in the order they occurred.</p> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///var/www/html/Main/cgi-bin/resize.py">/var/www/html/Main/cgi-bin/resize.py</a> in <strong><module></strong>()</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;10</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;11</small>&nbsp;filename&nbsp;=&nbsp;data.getvalue("filename")<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;&nbsp;&nbsp;12</small>&nbsp;im&nbsp;=&nbsp;Image.open("../JS/upload/"&nbsp;+&nbsp;filename)<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;13</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;14</small>&nbsp;(width,&nbsp;height)&nbsp;=&nbsp;im.size<br> </tt></font></td></tr> <tr><td><small><font color="#909090">im <em>undefined</em>, <strong>Image</strong>&nbsp;= &lt;module 'Image' from '/usr/lib/python2.7/dist-packages/PILcompat/Image.pyc'&gt;, Image.<strong>open</strong>&nbsp;= &lt;function open&gt;, <strong>filename</strong>&nbsp;= '<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06\x07\x07\x06\x08\n\x10\n\n\t\t\n\x14\x0e</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>'</font></small></td></tr></table> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///usr/lib/python2.7/dist-packages/PIL/Image.py">/usr/lib/python2.7/dist-packages/PIL/Image.py</a> in <strong>open</strong>(fp='../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', mode='r')</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1994</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;if&nbsp;isPath(fp):<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1995</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;fp<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;1996</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;fp&nbsp;=&nbsp;builtins.open(fp,&nbsp;"rb")<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1997</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;else:<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1998</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;""<br> </tt></font></td></tr> <tr><td><small><font color="#909090"><strong>fp</strong>&nbsp;= '../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', <em>global</em> <strong>builtins</strong>&nbsp;= &lt;module '__builtin__' (built-in)&gt;, builtins.<strong>open</strong>&nbsp;= &lt;built-in function open&gt;</font></small></td></tr></table><p><strong>&lt;type 'exceptions.TypeError'&gt;</strong>: file() argument 1 must be encoded string without NULL bytes, not str <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>args&nbsp;= ('file() argument 1 must be encoded string without NULL bytes, not str',) <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>message&nbsp;= 'file() argument 1 must be encoded string without NULL bytes, not str' <!-- The above is a description of an error in a Python program, formatted for a Web browser because the 'cgitb' module was enabled. In case you are not reading this in a Web browser, here is the original traceback: Traceback (most recent call last): File "/var/www/html/Main/cgi-bin/resize.py", line 12, in &lt;module&gt; im = Image.open("../JS/upload/" + filename) File "/usr/lib/python2.7/dist-packages/PIL/Image.py", line 1996, in open fp = builtins.open(fp, "rb") TypeError: file() argument 1 must be encoded string without NULL bytes, not str --> Does this mean that the formData I am sending over is empty?

  Read the article

• How to create a new WCF/MVC/jQuery application from scratch

  - by pjohnson

  As a corporate developer by trade, I don't get much opportunity to create from-the-ground-up web sites; usually it's tweaks, fixes, and new functionality to existing sites. And with hobby sites, I often don't find the challenges I run into with enterprise systems; usually it's starting from Visual Studio's boilerplate project and adding whatever functionality I want to play around with, rarely deploying outside my own machine. So my experience creating a new enterprise-level site was a bit dated, and the technologies to do so have come a long way, and are much more ready to go out of the box. My intention with this post isn't so much to provide any groundbreaking insights, but to just tie together a lot of information in one place to make it easy to create a new site from scratch. Architecture One site I created earlier this year had an MVC 3 front end and a WCF 4-driven service layer. Using Visual Studio 2010, these project types are easy enough to add to a new solution. I created a third Class Library project to store common functionality the front end and services layers both needed to access, for example, the DataContract classes that the front end uses to call services in the service layer. By keeping DataContract classes in a separate project, I avoided the need for the front end to have an assembly/project reference directly to the services code, a bit cleaner and more flexible of an SOA implementation. Consuming the service Even by this point, VS has given you a lot. You have a working web site and a working service, neither of which do much but are great starting points. To wire up the front end and the services, I needed to create proxy classes and WCF client configuration information. I decided to use the SvcUtil.exe utility provided as part of the Windows SDK, which you should have installed if you installed VS. VS also provides an Add Service Reference command since the .NET 1.x ASMX days, which I've never really liked; it creates several .cs/.disco/etc. files, some of which contained hardcoded URL's, adding duplicate files (*1.cs, *2.cs, etc.) without doing a good job of cleaning up after itself. I've found SvcUtil much cleaner, as it outputs one C# file (containing several proxy classes) and a config file with settings, and it's easier to use to regenerate the proxy classes when the service changes, and to then maintain all your configuration in one place (your Web.config, instead of the Service Reference files). I provided it a reference to a copy of my common assembly so it doesn't try to recreate the data contract classes, had it use the type List<T> for collections, and modified the output files' names and .NET namespace, ending up with a command like: svcutil.exe /l:cs /o:MyService.cs /config:MyService.config /r:MySite.Common.dll /ct:System.Collections.Generic.List`1 /n:*,MySite.Web.ServiceProxies http://localhost:59999/MyService.svc I took the generated MyService.cs file and drop it in the web project, under a ServiceProxies folder, matching the namespace and keeping it separate from classes I coded manually. Integrating the config file took a little more work, but only needed to be done once as these settings didn't often change. A great thing Microsoft improved with WCF 4 is configuration; namely, you can use all the default settings and not have to specify them explicitly in your config file. Unfortunately, SvcUtil doesn't generate its config file this way. If you just copy & paste MyService.config's contents into your front end's Web.config, you'll copy a lot of settings you don't need, plus this will get unwieldy if you add more services in the future, each with its own custom binding. Really, as the only mandatory settings are the endpoint's ABC's (address, binding, and contract) you can get away with just this: <system.serviceModel>  <client>    <endpoint address="http://localhost:59999/MyService.svc" binding="wsHttpBinding" contract="MySite.Web.ServiceProxies.IMyService" />  </client></system.serviceModel> By default, the services project uses basicHttpBinding. As you can see, I switched it to wsHttpBinding, a more modern standard. Using something like netTcpBinding would probably be faster and more efficient since the client & service are both written in .NET, but it requires additional server setup and open ports, whereas switching to wsHttpBinding is much simpler. From an MVC controller action method, I instantiated the client, and invoked the method for my operation. As with any object that implements IDisposable, I wrapped it in C#'s using() statement, a tidy construct that ensures Dispose gets called no matter what, even if an exception occurs. Unfortunately there are problems with that, as WCF's ClientBase<TChannel> class doesn't implement Dispose according to Microsoft's own usage guidelines. I took an approach similar to Technology Toolbox's fix, except using partial classes instead of a wrapper class to extend the SvcUtil-generated proxy, making the fix more seamless from the controller's perspective, and theoretically, less code I have to change if and when Microsoft fixes this behavior. User interface The MVC 3 project template includes jQuery and some other common JavaScript libraries by default. I updated the ones I used to the latest versions using NuGet, available in VS via the Tools > Library Package Manager > Manage NuGet Packages for Solution... > Updates. I also used this dialog to remove packages I wasn't using. Given that it's smart enough to know the difference between the .js and .min.js files, I was hoping it would be smart enough to know which to include during build and publish operations, but this doesn't seem to be the case. I ended up using Cassette to perform the minification and bundling of my JavaScript and CSS files; ASP.NET 4.5 includes this functionality out of the box. The web client to web server link via jQuery was easy enough. In my JavaScript function, unobtrusively wired up to a button's click event, I called $.ajax, corresponding to an action method that returns a JsonResult, accomplished by passing my model class to the Controller.Json() method, which jQuery helpfully translates from JSON to a JavaScript object.$.ajax calls weren't perfectly straightforward. I tried using the simpler $.post method instead, but ran into trouble without specifying the contentType parameter, which $.post doesn't have. The url parameter is simple enough, though for flexibility in how the site is deployed, I used MVC's Url.Action method to get the URL, then sent this to JavaScript in a JavaScript string variable. If the request needed input data, I used the JSON.stringify function to convert a JavaScript object with the parameters into a JSON string, which MVC then parses into strongly-typed C# parameters. I also specified "json" for dataType, and "application/json; charset=utf-8" for contentType. For success and error, I provided my success and error handling functions, though success is a bit hairier. "Success" in this context indicates whether the HTTP request succeeds, not whether what you wanted the AJAX call to do on the web server was successful. For example, if you make an AJAX call to retrieve a piece of data, the success handler will be invoked for any 200 OK response, and the error handler will be invoked for failed requests, e.g. a 404 Not Found (if the server rejected the URL you provided in the url parameter) or 500 Internal Server Error (e.g. if your C# code threw an exception that wasn't caught). If an exception was caught and handled, or if the data requested wasn't found, this would likely go through the success handler, which would need to do further examination to verify it did in fact get back the data for which it asked. I discuss this more in the next section. Logging and exception handling At this point, I had a working application. If I ran into any errors or unexpected behavior, debugging was easy enough, but of course that's not an option on public web servers. Microsoft Enterprise Library 5.0 filled this gap nicely, with its Logging and Exception Handling functionality. First I installed Enterprise Library; NuGet as outlined above is probably the best way to do so. I needed a total of three assembly references--Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, and Microsoft.Practices.EnterpriseLibrary.Logging. VS links with the handy Enterprise Library 5.0 Configuration Console, accessible by right-clicking your Web.config and choosing Edit Enterprise Library V5 Configuration. In this console, under Logging Settings, I set up a Rolling Flat File Trace Listener to write to log files but not let them get too large, using a Text Formatter with a simpler template than that provided by default. Logging to a different (or additional) destination is easy enough, but a flat file suited my needs. At this point, I verified it wrote as expected by calling the Microsoft.Practices.EnterpriseLibrary.Logging.Logger.Write method from my C# code. With those settings verified, I went on to wire up Exception Handling with Logging. Back in the EntLib Configuration Console, under Exception Handling, I used a LoggingExceptionHandler, setting its Logging Category to the category I already had configured in the Logging Settings. Then, from code (e.g. a controller's OnException method, or any action method's catch block), I called the Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException method, providing the exception and the exception policy name I had configured in the Exception Handling Settings. Before I got this configured correctly, when I tried it out, nothing was logged. In working with .NET, I'm used to seeing an exception if something doesn't work or isn't set up correctly, but instead working with these EntLib modules reminds me more of JavaScript (before the "use strict" v5 days)--it just does nothing and leaves you to figure out why, I presume due in part to the listener pattern Microsoft followed with the Enterprise Library. First, I verified logging worked on its own. Then, verifying/correcting where each piece wires up to the next resolved my problem. Your C# code calls into the Exception Handling module, referencing the policy you pass the HandleException method; that policy's configuration contains a LoggingExceptionHandler that references a logCategory; that logCategory should be added in the loggingConfiguration's categorySources section; that category references a listener; that listener should be added in the loggingConfiguration's listeners section, which specifies the name of the log file. One final note on error handling, as the proper way to handle WCF and MVC errors is a whole other very lengthy discussion. For AJAX calls to MVC action methods, depending on your configuration, an exception thrown here will result in ASP.NET'S Yellow Screen Of Death being sent back as a response, which is at best unnecessarily and uselessly verbose, and at worst a security risk as the internals of your application are exposed to potential hackers. I mitigated this by overriding my controller's OnException method, passing the exception off to the Exception Handling module as above. I created an ErrorModel class with as few properties as possible (e.g. an Error string), sending as little information to the client as possible, to both maximize bandwidth and mitigate risk. I then return an ErrorModel in JSON format for AJAX requests: if (filterContext.HttpContext.Request.IsAjaxRequest()){    filterContext.Result = Json(new ErrorModel(...));    filterContext.ExceptionHandled = true;} My $.ajax calls from the browser get a valid 200 OK response and go into the success handler. Before assuming everything is OK, I check if it's an ErrorModel or a model containing what I requested. If it's an ErrorModel, or null, I pass it to my error handler. If the client needs to handle different errors differently, ErrorModel can contain a flag, error code, string, etc. to differentiate, but again, sending as little information back as possible is ideal. Summary As any experienced ASP.NET developer knows, this is a far cry from where ASP.NET started when I began working with it 11 years ago. WCF services are far more powerful than ASMX ones, MVC is in many ways cleaner and certainly more unit test-friendly than Web Forms (if you don't consider the code/markup commingling you're doing again), the Enterprise Library makes error handling and logging almost entirely configuration-driven, AJAX makes a responsive UI more feasible, and jQuery makes JavaScript coding much less painful. It doesn't take much work to get a functional, maintainable, flexible application, though having it actually do something useful is a whole other matter.

  Read the article

• delphi insert update record´s

  - by ml

  Hi friends what is that im doing wrong because it goes and goes on LOOP var ii: Integer; i: Integer; j: Integer; ie : integer; je : integer; fileSource, fileDest: string; Fo : TSHFileOpStruct; buffer : array[0..4096] of char; p : pchar; dirFile: String; dirFile1: String; dirFile11: String; begin dirFile1 := (Dirlocal + 'Vibrometria\'+ClienteN.text+'\'); dirFile := (localAplicação+ 'Vibrometria\'+ClienteN.text+'\'+NInterv.text ) ; dirFile11:= Dirlocal+'Vibrometria\'; if ForceDirectories(dirFile11) then if ForceDirectories(dirFile1) then //...................................................................... begin ShowMessage('Vai devolver "'+cxDBTextEdit5.Text+'..........' +obra.Text); Sub_TRelFinal.First; Begin ADOTable_casa.First; Begin begin Sub_TRelFinal.Edit; //Tabela1Codoco.Value := Tabela2Codoco.Value; Sub_TRelFinal.FieldByName('Foto1').text := ADOTable_casa.FieldByName('Foto1').text; Sub_TRelFinal.FieldByName('Obra').text := ADOTable_casa.FieldByName('Obra').text; Sub_TRelFinal.FieldByName('OBS1').text := ADOTable_casa.FieldByName('OBS1').text; Sub_TRelFinal.FieldByName('Data_VisitaLocal').text := ADOTable_casa.FieldByName('Data_VisitaLocal').text; Sub_TRelFinal.FieldByName('ContractoN').text := ADOTable_casa .FieldByName('ContractoN').text;; Sub_TRelFinal.FieldByName('Cliente').text := ADOTable_casa .FieldByName('Cliente').text; Sub_TRelFinal.FieldByName('Morada').text := ADOTable_casa .FieldByName('Morada').text; Sub_TRelFinal.FieldByName('localizacao').text:= ADOTable_casa .FieldByName('localizacao').text; Sub_TRelFinal.FieldByName('Intruducao').text:= ADOTable_casa .FieldByName('Intruducao').text; Sub_TRelFinal.FieldByName('Analise').text := ADOTable_casa.FieldByName('Analise').text; Sub_TRelFinal.Post; end; End; end; //iniciar inserção registos sub Sub_TRelFinal_1.First; For j := 1 to Sub_TRelFinal_1.RecordCount do Begin ADOTable_casa_sub_1.First; For i := 1 To ADOTable_casa_sub_1.RecordCount Do Begin begin Sub_TRelFinal_1.Edit; //Tabela1Codoco.Value := Tabela2Codoco.Value; Sub_TRelFinal_1.FieldByName('Foto1').text := ADOTable_casa_sub_1.FieldByName('Foto1').text; Sub_TRelFinal_1.FieldByName('Obra').text := ADOTable_casa_sub_1.FieldByName('Obra').text; Sub_TRelFinal_1.FieldByName('OBS1').text := ADOTable_casa_sub_1.FieldByName('OBS1').text; Sub_TRelFinal_1.FieldByName('Data_VisitaLocal').text := ADOTable_casa_sub_1.FieldByName('Data_VisitaLocal').text; Sub_TRelFinal_1.FieldByName('ContractoN').text := ADOTable_casa_sub_1.FieldByName('ContractoN').text; Sub_TRelFinal_1.FieldByName('Cliente').text := ADOTable_casa_sub_1.FieldByName('Cliente').text; Sub_TRelFinal_1.FieldByName('Morada').text := ADOTable_casa_sub_1.FieldByName('Morada').text; Sub_TRelFinal_1.FieldByName('localizacao_eq').text:= ADOTable_casa_sub_1.FieldByName('localizacao_eq').text; Sub_TRelFinal_1.FieldByName('Equipamento').text:= ADOTable_casa_sub_1.FieldByName('Equipamento').text; Sub_TRelFinal_1.FieldByName('tipo_equip').text := ADOTable_casa_sub_1.FieldByName('tipo_equip').text; Sub_TRelFinal_1.Post; end; //iniciar inserção registos subsub SubTRelFinal_sub.First; For ie := 1 to SubTRelFinal_sub.RecordCount do Begin ADOTable_casa_sub_Sub.First; For je := 1 To ADOTable_casa_sub_Sub.RecordCount Do begin SubTRelFinal_sub.Edit; //Tabela1Codoco.Value := Tabela2Codoco.Value; SubTRelFinal_sub.FieldByName('Foto1').text := ADOTable_casa_sub_Sub.FieldByName('Foto1').text; SubTRelFinal_sub.FieldByName('Foto2').text := ADOTable_casa_sub_Sub.FieldByName('Foto2').text; SubTRelFinal_sub.FieldByName('Analisefoto1').text := ADOTable_casa_sub_Sub.FieldByName('Analisefoto1').text; SubTRelFinal_sub.FieldByName('Observações').text := ADOTable_casa_sub_Sub.FieldByName('Observações').text;; SubTRelFinal_sub.FieldByName('ContractoN').text := ADOTable_casa_sub_Sub.FieldByName('ContractoN').text; SubTRelFinal_sub.FieldByName('OBS3').text := ADOTable_casa_sub_Sub.FieldByName('OBS3').text; SubTRelFinal_sub.FieldByName('OBS4').text := ADOTable_casa_sub_Sub.FieldByName('OBS4').text; SubTRelFinal_sub.FieldByName('OBS2').text := ADOTable_casa_sub_Sub.FieldByName('OBS2').text; SubTRelFinal_sub.FieldByName('OBS1').text := ADOTable_casa_sub_Sub.FieldByName('OBS1').text; SubTRelFinal_sub.FieldByName('Localização').text := ADOTable_casa_sub_Sub.FieldByName('Localização').text; SubTRelFinal_sub.FieldByName('Tipo_equipamento').text:= ADOTable_casa_sub_Sub.FieldByName('Tipo_equipamento').text; SubTRelFinal_sub.FieldByName('Analisefoto101').text:= ADOTable_casa_sub_Sub.FieldByName('Analisefoto101').text; SubTRelFinal_sub.FieldByName('Analisefoto201').text := ADOTable_casa_sub_Sub.FieldByName('Analisefoto201').text; SubTRelFinal_sub.FieldByName('GrauAnomalia').text := ADOTable_casa_sub_Sub.FieldByName('GrauAnomalia').text; SubTRelFinal_sub.Post; end; ADOTable_casa_sub_Sub.Next; End; SubTRelFinal_sub.Next; End; ADOTable_casa_sub_1.Next; End; Sub_TRelFinal_1 .Next;

  Read the article

• Running SSIS packages from C#

  - by Piotr Rodak

  Most of the developers and DBAs know about two ways of deploying packages: You can deploy them to database server and run them using SQL Server Agent job or you can deploy the packages to file system and run them using dtexec.exe utility. Both approaches have their pros and cons. However I would like to show you that there is a third way (sort of) that is often overlooked, and it can give you capabilities the ‘traditional’ approaches can’t. I have been working for a few years with applications that run packages from host applications that are implemented in .NET. As you know, SSIS provides programming model that you can use to implement more flexible solutions. SSIS applications are usually thought to be batch oriented, with fairly rigid architecture and processing model, with fixed timeframes when the packages are executed to process data. It doesn’t to be the case, you don’t have to limit yourself to batch oriented architecture. I have very good experiences with service oriented architectures processing large amounts of data. These applications are more complex than what I would like to show here, but the principle stays the same: you can execute packages as a service, on ad-hoc basis. You can also implement and schedule various signals, HTTP calls, file drops, time schedules, Tibco messages and other to run the packages. You can implement event handler that will trigger execution of SSIS when a certain event occurs in StreamInsight stream. This post is just a small example of how you can use the API and other features to create a service that can run SSIS packages on demand. I thought it might be a good idea to implement a restful service that would listen to requests and execute appropriate actions. As it turns out, it is trivial in C#. The application is implemented as console application for the ease of debugging and running. In reality, you might want to implement the application as Windows service. To begin, you have to reference namespace System.ServiceModel.Web and then add a few lines of code: Uri baseAddress = new Uri("http://localhost:8011/");               WebServiceHost svcHost = new WebServiceHost(typeof(PackRunner), baseAddress);                           try             {                 svcHost.Open();                   Console.WriteLine("Service is running");                 Console.WriteLine("Press enter to stop the service.");                 Console.ReadLine();                   svcHost.Close();             }             catch (CommunicationException cex)             {                 Console.WriteLine("An exception occurred: {0}", cex.Message);                 svcHost.Abort();             } The interesting lines are 3, 7 and 13. In line 3 you create a WebServiceHost object. In line 7 you start listening on the defined URL and then in line 13 you shut down the service. As you have noticed, the WebServiceHost constructor is accepting type of an object (here: PackRunner) that will be instantiated as singleton and subsequently used to process the requests. This is the class where you put your logic, but to tell WebServiceHost how to use it, the class must implement an interface which declares methods to be used by the host. The interface itself must be ornamented with attribute ServiceContract. [ServiceContract]     public interface IPackRunner     {         [OperationContract]         [WebGet(UriTemplate = "runpack?package={name}")]         string RunPackage1(string name);           [OperationContract]         [WebGet(UriTemplate = "runpackwithparams?package={name}&rows={rows}")]         string RunPackage2(string name, int rows);     } Each method that is going to be used by WebServiceHost has to have attribute OperationContract, as well as WebGet or WebInvoke attribute. The detailed discussion of the available options is outside of scope of this post. I also recommend using more descriptive names to methods . Then, you have to provide the implementation of the interface: public class PackRunner : IPackRunner     {         ... There are two methods defined in this class. I think that since the full code is attached to the post, I will show only the more interesting method, the RunPackage2.   /// <summary> /// Runs package and sets some of its variables. /// </summary> /// <param name="name">Name of the package</param> /// <param name="rows">Number of rows to export</param> /// <returns></returns> public string RunPackage2(string name, int rows) {     try     {         string pkgLocation = ConfigurationManager.AppSettings["PackagePath"];           pkgLocation = Path.Combine(pkgLocation, name.Replace("\"", ""));           Console.WriteLine();         Console.WriteLine("Calling package {0} with parameter {1}.", name, rows);                  Application app = new Application();         Package pkg = app.LoadPackage(pkgLocation, null);           pkg.Variables["User::ExportRows"].Value = rows;         DTSExecResult pkgResults = pkg.Execute();         Console.WriteLine();         Console.WriteLine(pkgResults.ToString());         if (pkgResults == DTSExecResult.Failure)         {             Console.WriteLine();             Console.WriteLine("Errors occured during execution of the package:");             foreach (DtsError er in pkg.Errors)                 Console.WriteLine("{0}: {1}", er.ErrorCode, er.Description);             Console.WriteLine();             return "Errors occured during execution. Contact your support.";         }                  Console.WriteLine();         Console.WriteLine();         return "OK";     }     catch (Exception ex)     {         Console.WriteLine(ex);         return ex.ToString();     } }   The method accepts package name and number of rows to export. The packages are deployed to the file system. The path to the packages is configured in the application configuration file. This way, you can implement multiple services on the same machine, provided you also configure the URL for each instance appropriately. To run a package, you have to reference Microsoft.SqlServer.Dts.Runtime namespace. This namespace is implemented in Microsoft.SQLServer.ManagedDTS.dll which in my case was installed in the folder “C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies”. Once you have done it, you can create an instance of Microsoft.SqlServer.Dts.Runtime.Application as in line 18 in the above snippet. It may be a good idea to create the Application object in the constructor of the PackRunner class, to avoid necessity of recreating it each time the service is invoked. Then, in line 19 you see that an instance of Microsoft.SqlServer.Dts.Runtime.Package is created. The method LoadPackage in its simplest form just takes package file name as the first parameter. Before you run the package, you can set its variables to certain values. This is a great way of configuring your packages without all the hassle with dtsConfig files. In the above code sample, variable “User:ExportRows” is set to value of the parameter “rows” of the method. Eventually, you execute the package. The method doesn’t throw exceptions, you have to test the result of execution yourself. If the execution wasn’t successful, you can examine collection of errors exposed by the package. These are the familiar errors you often see during development and debugging of the package. I you run the package from the code, you have opportunity to persist them or log them using your favourite logging framework. The package itself is very simple; it connects to my AdventureWorks database and saves number of rows specified in variable “User::ExportRows” to a file. You should know that before you run the package, you can change its connection strings, logging, events and many more. I attach solution with the test service, as well as a project with two test packages. To test the service, you have to run it and wait for the message saying that the host is started. Then, just type (or copy and paste) the below command to your browser. http://localhost:8011/runpackwithparams?package=%22ExportEmployees.dtsx%22&rows=12 When everything works fine, and you modified the package to point to your AdventureWorks database, you should see "OK” wrapped in xml: I stopped the database service to simulate invalid connection string situation. The output of the request is different now: And the service console window shows more information: As you see, implementing service oriented ETL framework is not a very difficult task. You have ability to configure the packages before you run them, you can implement logging that is consistent with the rest of your system. In application I have worked with we also have resource monitoring and execution control. We don’t allow to run more than certain number of packages to run simultaneously. This ensures we don’t strain the server and we use memory and CPUs efficiently. The attached zip file contains two projects. One is the package runner. It has to be executed with administrative privileges as it registers HTTP namespace. The other project contains two simple packages. This is really a cool thing, you should check it out!

  Read the article

• CodePlex Daily Summary for Wednesday, November 21, 2012

  CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

  Read the article

• MERGE Bug with Filtered Indexes

  - by Paul White

  A MERGE statement can fail, and incorrectly report a unique key violation when: The target table uses a unique filtered index; and No key column of the filtered index is updated; and A column from the filtering condition is updated; and Transient key violations are possible Example Tables Say we have two tables, one that is the target of a MERGE statement, and another that contains updates to be applied to the target.  The target table contains three columns, an integer primary key, a single character alternate key, and a status code column.  A filtered unique index exists on the alternate key, but is only enforced where the status code is ‘a’: CREATE TABLE #Target ( pk integer NOT NULL, ak character(1) NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) );   CREATE UNIQUE INDEX uq1 ON #Target (ak) INCLUDE (status_code) WHERE status_code = 'a'; The changes table contains just an integer primary key (to identify the target row to change) and the new status code: CREATE TABLE #Changes ( pk integer NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) ); Sample Data The sample data for the example is: INSERT #Target (pk, ak, status_code) VALUES (1, 'A', 'a'), (2, 'B', 'a'), (3, 'C', 'a'), (4, 'A', 'd');   INSERT #Changes (pk, status_code) VALUES (1, 'd'), (4, 'a');          Target                     Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ a           ¦    ¦  1 ¦ d           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ d           ¦ +-----------------------+ The target table’s alternate key (ak) column is unique, for rows where status_code = ‘a’.  Applying the changes to the target will change row 1 from status ‘a’ to status ‘d’, and row 4 from status ‘d’ to status ‘a’.  The result of applying all the changes will still satisfy the filtered unique index, because the ‘A’ in row 1 will be deleted from the index and the ‘A’ in row 4 will be added. Merge Test One Let’s now execute a MERGE statement to apply the changes: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; The MERGE changes the two target rows as expected.  The updated target table now contains: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦ <—changed from ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦ <—changed from ‘d’ +-----------------------+ Merge Test Two Now let’s repopulate the changes table to reverse the updates we just performed: TRUNCATE TABLE #Changes;   INSERT #Changes (pk, status_code) VALUES (1, 'a'), (4, 'd'); This will change row 1 back to status ‘a’ and row 4 back to status ‘d’.  As a reminder, the current state of the tables is:          Target                        Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ d           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ a           ¦ +-----------------------+ We execute the same MERGE statement: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; However this time we receive the following message: Msg 2601, Level 14, State 1, Line 1 Cannot insert duplicate key row in object 'dbo.#Target' with unique index 'uq1'. The duplicate key value is (A). The statement has been terminated. Applying the changes using UPDATE Let’s now rewrite the MERGE to use UPDATE instead: UPDATE t SET status_code = c.status_code FROM #Target AS t JOIN #Changes AS c ON t.pk = c.pk WHERE c.status_code <> t.status_code; This query succeeds where the MERGE failed.  The two rows are updated as expected: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ a           ¦ <—changed back to ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ d           ¦ <—changed back to ‘d’ +-----------------------+ What went wrong with the MERGE? In this test, the MERGE query execution happens to apply the changes in the order of the ‘pk’ column. In test one, this was not a problem: row 1 is removed from the unique filtered index by changing status_code from ‘a’ to ‘d’ before row 4 is added.  At no point does the table contain two rows where ak = ‘A’ and status_code = ‘a’. In test two, however, the first change was to change row 1 from status ‘d’ to status ‘a’.  This change means there would be two rows in the filtered unique index where ak = ‘A’ (both row 1 and row 4 meet the index filtering criteria ‘status_code = a’). The storage engine does not allow the query processor to violate a unique key (unless IGNORE_DUP_KEY is ON, but that is a different story, and doesn’t apply to MERGE in any case).  This strict rule applies regardless of the fact that if all changes were applied, there would be no unique key violation (row 4 would eventually be changed from ‘a’ to ‘d’, removing it from the filtered unique index, and resolving the key violation). Why it went wrong The query optimizer usually detects when this sort of temporary uniqueness violation could occur, and builds a plan that avoids the issue.  I wrote about this a couple of years ago in my post Beware Sneaky Reads with Unique Indexes (you can read more about the details on pages 495-497 of Microsoft SQL Server 2008 Internals or in Craig Freedman’s blog post on maintaining unique indexes).  To summarize though, the optimizer introduces Split, Filter, Sort, and Collapse operators into the query plan to: Split each row update into delete followed by an inserts Filter out rows that would not change the index (due to the filter on the index, or a non-updating update) Sort the resulting stream by index key, with deletes before inserts Collapse delete/insert pairs on the same index key back into an update The effect of all this is that only net changes are applied to an index (as one or more insert, update, and/or delete operations).  In this case, the net effect is a single update of the filtered unique index: changing the row for ak = ‘A’ from pk = 4 to pk = 1.  In case that is less than 100% clear, let’s look at the operation in test two again:          Target                     Changes                   Result +-----------------------+    +------------------+    +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦    ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦    ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ d           ¦    ¦  1 ¦ A  ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦    ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+    ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦                            ¦  4 ¦ A  ¦ d           ¦ +-----------------------+                            +-----------------------+ From the filtered index’s point of view (filtered for status_code = ‘a’ and shown in nonclustered index key order) the overall effect of the query is:   Before           After +---------+    +---------+ ¦ pk ¦ ak ¦    ¦ pk ¦ ak ¦ ¦----+----¦    ¦----+----¦ ¦  4 ¦ A  ¦    ¦  1 ¦ A  ¦ ¦  2 ¦ B  ¦    ¦  2 ¦ B  ¦ ¦  3 ¦ C  ¦    ¦  3 ¦ C  ¦ +---------+    +---------+ The single net change there is a change of pk from 4 to 1 for the nonclustered index entry ak = ‘A’.  This is the magic performed by the split, sort, and collapse.  Notice in particular how the original changes to the index key (on the ‘ak’ column) have been transformed into an update of a non-key column (pk is included in the nonclustered index).  By not updating any nonclustered index keys, we are guaranteed to avoid transient key violations. The Execution Plans The estimated MERGE execution plan that produces the incorrect key-violation error looks like this (click to enlarge in a new window): The successful UPDATE execution plan is (click to enlarge in a new window): The MERGE execution plan is a narrow (per-row) update.  The single Clustered Index Merge operator maintains both the clustered index and the filtered nonclustered index.  The UPDATE plan is a wide (per-index) update.  The clustered index is maintained first, then the Split, Filter, Sort, Collapse sequence is applied before the nonclustered index is separately maintained. There is always a wide update plan for any query that modifies the database. The narrow form is a performance optimization where the number of rows is expected to be relatively small, and is not available for all operations.  One of the operations that should disallow a narrow plan is maintaining a unique index where intermediate key violations could occur. Workarounds The MERGE can be made to work (producing a wide update plan with split, sort, and collapse) by: Adding all columns referenced in the filtered index’s WHERE clause to the index key (INCLUDE is not sufficient); or Executing the query with trace flag 8790 set e.g. OPTION (QUERYTRACEON 8790). Undocumented trace flag 8790 forces a wide update plan for any data-changing query (remember that a wide update plan is always possible).  Either change will produce a successfully-executing wide update plan for the MERGE that failed previously. Conclusion The optimizer fails to spot the possibility of transient unique key violations with MERGE under the conditions listed at the start of this post.  It incorrectly chooses a narrow plan for the MERGE, which cannot provide the protection of a split/sort/collapse sequence for the nonclustered index maintenance. The MERGE plan may fail at execution time depending on the order in which rows are processed, and the distribution of data in the database.  Worse, a previously solid MERGE query may suddenly start to fail unpredictably if a filtered unique index is added to the merge target table at any point. Connect bug filed here Tests performed on SQL Server 2012 SP1 CUI (build 11.0.3321) x64 Developer Edition © 2012 Paul White – All Rights Reserved Twitter: @SQL_Kiwi Email: [email protected]

  Read the article

• CodePlex Daily Summary for Friday, February 04, 2011

  CodePlex Daily Summary for Friday, February 04, 2011Popular ReleasesOJDetective: Branch828: New branch for testing.TVA Code Library: TVA Code Library v4.0.1 Release: This download contains TVA Code Library class libraries, tools, templates and help docs that target the .NET Framework 4.0. Build Date: 02/04/2011 Build Version: 4.0.1.62247 See TVA Code Library v4.0.1 Release Notes for a detailed list of changes.ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...Rawr: Rawr 4.0.18 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionFacebook C# SDK: 5.0.1 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is second BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using t...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comPhalanger - The PHP Language Compiler for the .NET Framework: 2.0 (February 2011): Next release of Phalanger; again faster, more stable and ready for daily use. Based on many user experiences this release is one more step closer to be perfect compiler and runtime of your old PHP applications; or perfect platform for migrating to .NET. February 2011 release of Phalanger introduces several changes, enhancements and fixes. See complete changelist for all the changes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger....Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...Minemapper: Minemapper v0.1.4: Updated mcmap, now supports new block types. Added a Worlds->'View Cache Folder' menu item.StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...Minecraft Tools: Minecraft Topographical Survey 1.4: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds MCRegion support and fixes bugs that caused rendering to fail for some users. New in this version of MTS: Support for rendering worlds compressed with MCRegion Fixed rendering failure when encountering non-NBT files with the .dat extension Fixed rendering failure when encountering corrupt NBT files Minor GUI updates Note that the command...MVC Controls Toolkit: Mvc Controls Toolkit 0.8: Fixed the following bugs: *Variable name error in the jvascript file that prevented the use of the deleted item template of the Datagrid *Now after the changes applied to an item of the DataGrid are cancelled all input fields are reset to the very initial value they had. *Other minor bugs. Added: *This version is available both for MVC2, and MVC 3. The MVC 3 version has a release number of 0.85. This way one can install both version. *Client Validation support has been added to all control...Office Web.UI: Beta preview (Source): This is the first Beta. it includes full source code and all available controls. Some designers are not ready, and some features are not finalized allready (missing properties, draft styles) ThanksASP.net Ribbon: Version 2.2: This release brings some new controls (part of Office Web.UI). A few bugs are fixed and it includes the "auto resize" feature as you resize the window. (It can cause an infinite loop when the window is too reduced, it's why this release is not marked as "stable"). I will release more versions 2.3, 2.4... until V3 which will be the official launch of Office Web.UI. Both products will evolve at the same speed. Thanks.xUnit.net - Unit Testing for .NET: xUnit.net 1.7: xUnit.net release 1.7Build #1540 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision) Ad...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.3: Version: 2.0.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654New Projects.NET API for ZingChart: This is a .NET assembly that accepts key value pairs in the form of a dictionary object. It also allows you to set the properties needed for a ZingChart. It includes a ToJSON method that returns the appropriate JSON to rend either a Flash or HTML 5 version of ZingChart..net vkontakte api: vkontakte .net wrapper vor vkontakte api, written in C# 2.0CID Delivery: CIDContact Form for Umbraco: Contact Form for Umbraco is an extension for Umbraco (surprise!). It's supposed to be just like Umbraco: Simple, flexible and friendly.DashBoard: ProyectoenVerifyV2.0: Server Compare toolHttp Post: HttpPost makes it easier to post form data and upload files via HTTP. Supports uri-encoded and Multipart (http-boundary) formats. Written in C#, just 10 KBMemoDb: MemoDb is a memory database that supports transactionability. MemoDb is for mocking Linq providers in unit testing environments.MiRCraft: Mechanics Inspired Realitypower: educational purposesSpace Invaders Clone: <Space invaders clone> <C# with XNA 3.0>SSIS Dataflow Discoverer (DFLD): Dataflow Discoverer (DFLD) is a command-line discovery utility that detects and writes the metadata of SSIS dataflow columns to a SQL Server lookup table. DFLD detects Dataflows nested within containers up to any level of nesting. Test Case Editor 2010: TCE 2010 is a lightweight application that makes it easier for MTM users to edit both Test Cases and Shared Steps without using MTM. This project was inspired by ajryan at http://teststepseditor.codeplex.com However, it has since taken on a different functionality and appearance.TFS Project: Team Foundation ProjectTimeSnapper GCAL Plugin: TimeSnapper GCAL PluginTower of Hanoi: tower of hanoiTwilight 1.0 (Beta): My first Twitter application written in VB.Net and TwitterVB. It performs basic Twitter functions and is designed to run as a desktop client application. For more information about TwitterVB Goto http://twittervb.codeplex.comUnicode Regions Generator: A Silverlight app that generate unicode regions used in a file.WCF-Based Streaming File Server: Use a secure token to access a file on a remote UNC drive. The token expires after a period of time, and can be adapted into other security mechanismsWidget Twitter: Projeto que será apresentado no webcast Criando uma Aplicação (Widget) para o Twitter, no dia 24/02/2011.

  Read the article

• Tabular (X)HTML forms

  - by detly

  I have a set of items that can be in various states. I want to allow a user to use an (X)HTML form to change the state, and easily view the state of a group of objects ...so to this end, I'd like a layout like: | item1 | radio button for state 1 | radio for state 2 | ... | [update button] | | item2 | radio button for state 1 | radio for state 2 | ... | [update button] | etc. I prefer the radio buttons to list boxes so that it's easy for a user to visually scan for things in a certain state. It seemed like perfectly tabular data to me. The only problem is, you can't have forms inside a table that cross table cells (ie. <tr> <form> <td> ... is invalid). I thought, "hey, I could have one giant form wrapping a table, and make the [update button] value contain the IDs for each row!" Turns out certain versions of IE send ALL THE SUBMIT BUTTON VALUES on any single form. So I thought perhaps to to lay it out with <div>s and place the forms inside a single <td>. But then they break a line on each <div>. So I fixed their width and made them float: left. But then they wrap inside the table cells if the table row is wider than the page, and the radio controls don't line up with the headings. Is it possible to lay this out as I intend? The XHTML below shows the intended structure. Observe what happens if you resize the browser window below the width of the table (ideally, the name would break or the table would show a scroll bar). <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head><title>Test</title> <style type="text/css"> .state-select, .thing-state-name, .update { float: left; width: 8em; } .state-select { text-align: center; } </style> </head> <body> <table> <thead> <tr> <th class="thing-name-header">Thing</th> <th> <div class="thing-state-name">Present</div> <div class="thing-state-name">Absent</div> <div class="thing-state-name">Haven't looked</div> </th> </tr> </thead> <tbody> <tr> <td>Apple</td> <td> <form action="something" method="post"> <input type="hidden" name="id" value="1" /> <div class="state-select"><input type="radio" name="presence" value="present" checked="checked" /></div> <div class="state-select"><input type="radio" name="presence" value="absent" /></div> <div class="state-select"><input type="radio" name="presence" value="unknown" /></div> <div class="update"><input type="submit" value="Update" /></div> </form> </td></tr> <tr> <td>Orange</td> <td> <form action="something" method="post"> <input type="hidden" name="id" value="2" /> <div class="state-select"><input type="radio" name="presence" value="present" /></div> <div class="state-select"><input type="radio" name="presence" value="absent" checked="checked" /></div> <div class="state-select"><input type="radio" name="presence" value="unknown" /></div> <div class="update"><input type="submit" value="Update" /></div> </form> </td></tr> <tr> <td>David Bowie</td> <td> <form action="something" method="post"> <input type="hidden" name="id" value="3" /> <div class="state-select"><input type="radio" name="presence" value="present" /></div> <div class="state-select"><input type="radio" name="presence" value="absent" /></div> <div class="state-select"><input type="radio" name="presence" value="unknown" checked="checked" /></div> <div class="update"><input type="submit" value="Update" /></div> </form> </td></tr> </tbody> </table> </body> </html>

  Read the article

• Creating ASP.NET MVC Negotiated Content Results

  - by Rick Strahl

  In a recent ASP.NET MVC application I’m involved with, we had a late in the process request to handle Content Negotiation: Returning output based on the HTTP Accept header of the incoming HTTP request. This is standard behavior in ASP.NET Web API but ASP.NET MVC doesn’t support this functionality directly out of the box. Another reason this came up in discussion is last week’s announcements of ASP.NET vNext, which seems to indicate that ASP.NET Web API is not going to be ported to the cloud version of vNext, but rather be replaced by a combined version of MVC and Web API. While it’s not clear what new API features will show up in this new framework, it’s pretty clear that the ASP.NET MVC style syntax will be the new standard for all the new combined HTTP processing framework. Why negotiated Content? Content negotiation is one of the key features of Web API even though it’s such a relatively simple thing. But it’s also something that’s missing in MVC and once you get used to automatically having your content returned based on Accept headers it’s hard to go back to manually having to create separate methods for different output types as you’ve had to with Microsoft server technologies all along (yes, yes I know other frameworks – including my own – have done this for years but for in the box features this is relatively new from Web API). As a quick review,  Accept Header content negotiation works off the request’s HTTP Accept header:POST http://localhost/mydailydosha/Editable/NegotiateContent HTTP/1.1 Content-Type: application/json Accept: application/json Host: localhost Content-Length: 76 Pragma: no-cache { ElementId: "header", PageName: "TestPage", Text: "This is a nice header" } If I make this request I would expect to get back a JSON result based on my application/json Accept header. To request XML  I‘d just change the accept header:Accept: text/xml and now I’d expect the response to come back as XML. Now this only works with media types that the server can process. In my case here I need to handle JSON, XML, HTML (using Views) and Plain Text. HTML results might need more than just a data return – you also probably need to specify a View to render the data into either by specifying the view explicitly or by using some sort of convention that can automatically locate a view to match. Today ASP.NET MVC doesn’t support this sort of automatic content switching out of the box. Unfortunately, in my application scenario we have an application that started out primarily with an AJAX backend that was implemented with JSON only. So there are lots of JSON results like this:[Route("Customers")] public ActionResult GetCustomers() { return Json(repo.GetCustomers(),JsonRequestBehavior.AllowGet); } These work fine, but they are of course JSON specific. Then a couple of weeks ago, a requirement came in that an old desktop application needs to also consume this API and it has to use XML to do it because there’s no JSON parser available for it. Ooops – stuck with JSON in this case. While it would have been easy to add XML specific methods I figured it’s easier to add basic content negotiation. And that’s what I show in this post. Missteps – IResultFilter, IActionFilter My first attempt at this was to use IResultFilter or IActionFilter which look like they would be ideal to modify result content after it’s been generated using OnResultExecuted() or OnActionExecuted(). Filters are great because they can look globally at all controller methods or individual methods that are marked up with the Filter’s attribute. But it turns out these filters don’t work for raw POCO result values from Action methods. What we wanted to do for API calls is get back to using plain .NET types as results rather than result actions. That is  you write a method that doesn’t return an ActionResult, but a standard .NET type like this:public Customer UpdateCustomer(Customer cust) { … do stuff to customer :-) return cust; } Unfortunately both OnResultExecuted and OnActionExecuted receive an MVC ContentResult instance from the POCO object. MVC basically takes any non-ActionResult return value and turns it into a ContentResult by converting the value using .ToString(). Ugh. The ContentResult itself doesn’t contain the original value, which is lost AFAIK with no way to retrieve it. So there’s no way to access the raw customer object in the example above. Bummer. Creating a NegotiatedResult This leaves mucking around with custom ActionResults. ActionResults are MVC’s standard way to return action method results – you basically specify that you would like to render your result in a specific format. Common ActionResults are ViewResults (ie. View(vn,model)), JsonResult, RedirectResult etc. They work and are fairly effective and work fairly well for testing as well as it’s the ‘standard’ interface to return results from actions. The problem with the this is mainly that you’re explicitly saying that you want a specific result output type. This works well for many things, but sometimes you do want your result to be negotiated. My first crack at this solution here is to create a simple ActionResult subclass that looks at the Accept header and based on that writes the output. I need to support JSON and XML content and HTML as well as text – so effectively 4 media types: application/json, text/xml, text/html and text/plain. Everything else is passed through as ContentResult – which effecively returns whatever .ToString() returns. Here’s what the NegotiatedResult usage looks like:public ActionResult GetCustomers() { return new NegotiatedResult(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return new NegotiatedResult("Show", repo.GetCustomer(id)); } There are two overloads of this method – one that returns just the raw result value and a second version that accepts an optional view name. The second version returns the Razor view specified only if text/html is requested – otherwise the raw data is returned. This is useful in applications where you have an HTML front end that can also double as an API interface endpoint that’s using the same model data you send to the View. For the application I mentioned above this was another actual use-case we needed to address so this was a welcome side effect of creating a custom ActionResult. There’s also an extension method that directly attaches a Negotiated() method to the controller using the same syntax:public ActionResult GetCustomers() { return this.Negotiated(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return this.Negotiated("Show",repo.GetCustomer(id)); } Using either of these mechanisms now allows you to return JSON, XML, HTML or plain text results depending on the Accept header sent. Send application/json you get just the Customer JSON data. Ditto for text/xml and XML data. Pass text/html for the Accept header and the "Show.cshtml" Razor view is rendered passing the result model data producing final HTML output. While this isn’t as clean as passing just POCO objects back as I had intended originally, this approach fits better with how MVC action methods are intended to be used and we get the bonus of being able to specify a View to render (optionally) for HTML. How does it work An ActionResult implementation is pretty straightforward. You inherit from ActionResult and implement the ExecuteResult method to send your output to the ASP.NET output stream. ActionFilters are an easy way to effectively do post processing on ASP.NET MVC controller actions just before the content is sent to the output stream, assuming your specific action result was used. Here’s the full code to the NegotiatedResult class (you can also check it out on GitHub):/// <summary> /// Returns a content negotiated result based on the Accept header. /// Minimal implementation that works with JSON and XML content, /// can also optionally return a view with HTML. /// </summary> /// <example> /// // model data only /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult(repo.Customers.OrderBy( c=> c.Company) ) /// } /// // optional view for HTML /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public class NegotiatedResult : ActionResult { /// <summary> /// Data stored to be 'serialized'. Public /// so it's potentially accessible in filters. /// </summary> public object Data { get; set; } /// <summary> /// Optional name of the HTML view to be rendered /// for HTML responses /// </summary> public string ViewName { get; set; } public static bool FormatOutput { get; set; } static NegotiatedResult() { FormatOutput = HttpContext.Current.IsDebuggingEnabled; } /// <summary> /// Pass in data to serialize /// </summary> /// <param name="data">Data to serialize</param> public NegotiatedResult(object data) { Data = data; } /// <summary> /// Pass in data and an optional view for HTML views /// </summary> /// <param name="data"></param> /// <param name="viewName"></param> public NegotiatedResult(string viewName, object data) { Data = data; ViewName = viewName; } public override void ExecuteResult(ControllerContext context) { if (context == null) throw new ArgumentNullException("context"); HttpResponseBase response = context.HttpContext.Response; HttpRequestBase request = context.HttpContext.Request; // Look for specific content types if (request.AcceptTypes.Contains("text/html")) { response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); } else if (request.AcceptTypes.Contains("text/plain")) { response.ContentType = "text/plain"; response.Write(Data); } else if (request.AcceptTypes.Contains("application/json")) { using (JsonTextWriter writer = new JsonTextWriter(response.Output)) { var settings = new JsonSerializerSettings(); if (FormatOutput) settings.Formatting = Newtonsoft.Json.Formatting.Indented; JsonSerializer serializer = JsonSerializer.Create(settings); serializer.Serialize(writer, Data); writer.Flush(); } } else if (request.AcceptTypes.Contains("text/xml")) { response.ContentType = "text/xml"; if (Data != null) { using (var writer = new XmlTextWriter(response.OutputStream, new UTF8Encoding())) { if (FormatOutput) writer.Formatting = System.Xml.Formatting.Indented; XmlSerializer serializer = new XmlSerializer(Data.GetType()); serializer.Serialize(writer, Data); writer.Flush(); } } } else { // just write data as a plain string response.Write(Data); } } } /// <summary> /// Extends Controller with Negotiated() ActionResult that does /// basic content negotiation based on the Accept header. /// </summary> public static class NegotiatedResultExtensions { /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated( repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, object data) { return new NegotiatedResult(data); } /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="viewName">Name of the View to when Accept is text/html</param> /// /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, string viewName, object data) { return new NegotiatedResult(viewName, data); } } Output Generation – JSON and XML Generating output for XML and JSON is simple – you use the desired serializer and off you go. Using XmlSerializer and JSON.NET it’s just a handful of lines each to generate serialized output directly into the HTTP output stream. Please note this implementation uses JSON.NET for its JSON generation rather than the default JavaScriptSerializer that MVC uses which I feel is an additional bonus to implementing this custom action. I’d already been using a custom JsonNetResult class previously, but now this is just rolled into this custom ActionResult. Just keep in mind that JSON.NET outputs slightly different JSON for certain things like collections for example, so behavior may change. One addition to this implementation might be a flag to allow switching the JSON serializer. Html View Generation Html View generation actually turned out to be easier than anticipated. Initially I used my generic ASP.NET ViewRenderer Class that can render MVC views from any ASP.NET application. However it turns out since we are executing inside of an active MVC request there’s an easier way: We can simply create a custom ViewResult and populate its members and then execute it. The code in text/html handling code that renders the view is simply this:response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); which is a neat and easy way to render a Razor view assuming you have an active controller that’s ready for rendering. Sweet – dependency removed which makes this class self-contained without any external dependencies other than JSON.NET. Summary While this isn’t exactly a new topic, it’s the first time I’ve actually delved into this with MVC. I’ve been doing content negotiation with Web API and prior to that with my REST library. This is the first time it’s come up as an issue in MVC. But as I have worked through this I find that having a way to specify both HTML Views *and* JSON and XML results from a single controller certainly is appealing to me in many situations as we are in this particular application returning identical data models for each of these operations. Rendering content negotiated views is something that I hope ASP.NET vNext will provide natively in the combined MVC and WebAPI model, but we’ll see how this actually will be implemented. In the meantime having a custom ActionResult that provides this functionality is a workable and easily adaptable way of handling this going forward. Whatever ends up happening in ASP.NET vNext the abstraction can probably be changed to support the native features of the future. Anyway I hope some of you found this useful if not for direct integration then as insight into some of the rendering logic that MVC uses to get output into the HTTP stream… Related Resources Latest Version of NegotiatedResult.cs on GitHub Understanding Action Controllers Rendering ASP.NET Views To String© Rick Strahl, West Wind Technologies, 2005-2014Posted in MVC  ASP.NET  HTTP   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Curl_errno=55, "Failed sending network data."

  - by 4dplane

  Hi all: I have a php script that updates a database via an api. This script works on one server but not on another. Both servers have curl enabled and they have php 5.2.6 or above. The error happens in the do_put() method. The rest of the script seems to be fine. I have found that: curl_errno= 55 = "Failed sending network data". curl_error= select/poll returned error <?php //phpinfo(); require_once "class.DelveAuthUtil.php"; $access_key = ""; $secret = "W"; $org_id = ""; $media_id = ""; $new_tag_name = "uvideo"; $assign_tag_to_media_url = "http://api..com/rest/organizations/$org_id/media/$media_id/properties/tags/$new_tag_name"; $signed_create_new_tag_url = DAU::authenticate_request("PUT", $assign_tag_to_media_url, $access_key, $secret); # perform the creation of the new custom property $put_response = do_put($signed_create_new_tag_url); # Execute the POST function do_post($url, $params=array()) { # Combine parameters $param_string = ""; foreach ($params as $key => $value) { $value = urlencode($value); $param_string = $param_string . "&$key=$value"; } // Get the curl session object $session = curl_init($url); // Set the POST options. curl_setopt ($session, CURLOPT_POST, true); curl_setopt ($session, CURLOPT_POSTFIELDS, $param_string); curl_setopt($session, CURLOPT_HEADER, false); curl_setopt($session, CURLOPT_RETURNTRANSFER, true); // Do the POST and then close the session $response = curl_exec($session); curl_close($session); return $response; } # Execute the PUT function do_put($url) { // Get the curl session object $session = curl_init($url); print(" <br> session= " . $session . "<br>"); // Set the PUT options. print ("opt0= " . curl_setopt($session, CURLOPT_VERBOSE, TRUE) . "<br>"); print ("opt1= " . curl_setopt ($session, CURLOPT_PUT, true) . "<br>"); print ("opt2= " . curl_setopt ($session, CURLOPT_HEADER, false) . "<br>"); print ("opt3= " . curl_setopt ($session, CURLOPT_RETURNTRANSFER, true) . "<br>"); // Do the PUT and then close the session $response = curl_exec($session); if (curl_errno($session)) { print ( "curl_errno= " . curl_errno($session). "<br>"); print( "curl_error= " . curl_error($session) . "<br>"); } else { curl_close($session); } } I have small lead in the Apache log - there is an SSL issue that I do not know how to resolve. [Thu Mar 25 15:57:58 2010] [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! [Thu Mar 25 15:57:58 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations [Thu Mar 25 15:58:59 2010] [notice] caught SIGTERM, shutting down [Thu Mar 25 15:58:59 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Mar 25 15:58:59 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu Mar 25 15:58:59 2010] [warn] RSA server certificate CommonName (CN) `yourvps.a2hosting.com' does NOT match server name!? [Thu Mar 25 15:58:59 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu Mar 25 15:58:59 2010] [warn] RSA server certificate CommonName (CN) `yourvps.a2hosting.com' does NOT match server name!? [Thu Mar 25 15:58:59 2010] [warn] Init: SSL server IP/port conflict: my1.com:443 (/home/httpd/my.com/conf/kloxo.my1.com:69) vs. elggtest.my1.com:443 (/home/httpd/elggtest.my1.com/conf/kloxo.elggtest.my1.com:71) [Thu Mar 25 15:58:59 2010] [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! [Thu Mar 25 15:58:59 2010] [notice] Digest: generating secret for digest authentication ... [Thu Mar 25 15:58:59 2010] [notice] Digest: done [Thu Mar 25 15:59:00 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu Mar 25 15:59:00 2010] [warn] RSA server certificate CommonName (CN) `yourvps.a2hosting.com' does NOT match server name!? [Thu Mar 25 15:59:00 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu Mar 25 15:59:00 2010] [warn] RSA server certificate CommonName (CN) `yourvps.a2hosting.com' does NOT match server name!? [Thu Mar 25 15:59:00 2010] [warn] Init: SSL server IP/port conflict: my1.com:443 (/home/httpd/my1.com/conf/kloxo.my1.com:69) vs. elggtest.my1.com:443 (/home/httpd/elggtest.my1.com/conf/kloxo.elggtest.my1.com:71) [Thu Mar 25 15:59:00 2010] [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! [Thu Mar 25 15:59:00 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations[/PHP] Any help would be great! Thanks, 4dplane

  Read the article

• JQuery form submit Question?

  - by SLAPme

  I'm kind of new to JQuery and was wondering how can I have the following text appear when the user submits there changes <p>Your changes have been saved.</p>? How do I fix my code so it displays this message? JQuery script. $(function() { $(".save-button").click(function() { $.post($("#contact-form").attr("action"), $("#contact-form").serialize(), function(html) { $("div.contact-info-form").html(html); }); return false; // prevent normal submit }); }); Here is the html. <div id="contact-info-form" class="form-content"> <h2>Contact Information</h2> <form method="post" action="index.php" id="contact-form"> <fieldset> <ul> <li><label for="address">Address 1: </label><input type="text" name="address" id="address" size="25" class="input-size" value="<?php if (isset($_POST['address'])) { echo $_POST['address']; } else if(!empty($address)) { echo $address; } ?>" /></li> <li><label for="address_two">Address 2: </label><input type="text" name="address_two" id="address_two" size="25" class="input-size" value="<?php if (isset($_POST['address_two'])) { echo $_POST['address_two']; } else if(!empty($address_two)) { echo $address_two; } ?>" /></li> <li><label for="city_town">City/Town: </label><input type="text" name="city_town" id="city_town" size="25" class="input-size" value="<?php if (isset($_POST['city_town'])) { echo $_POST['city_town']; } else if(!empty($city_town)) { echo $city_town; } ?>" /></li> <li><label for="state_province">State/Province: </label> <?php echo '<select name="state_province" id="state_province">' . "\n"; foreach($state_options as $option) { if ($option == $state_province) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="zipcode">Zip/Post Code: </label><input type="text" name="zipcode" id="zipcode" size="5" class="input-size" value="<?php if (isset($_POST['zipcode'])) { echo $_POST['zipcode']; } else if(!empty($zipcode)) { echo $zipcode; } ?>" /></li> <li><label for="country">Country: </label> <?php echo '<select name="country" id="country">' . "\n"; foreach($countries as $option) { if ($option == $country) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else if($option == "-------------") { echo '<option value="' . $option . '" disabled="disabled">' . $option . '</option>'; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="email">Email Address: </label><input type="text" name="email" id="email" size="25" class="input-size" value="<?php if (isset($_POST['email'])) { echo $_POST['email']; } else if(!empty($email)) { echo $email; } ?>" /><br /><span>We don't spam or share your email with third parties. We respect your privacy.</span></li> <li><p>Changes have been saved</p><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="contact_info_submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form> </div>

  Read the article

• CodePlex Daily Summary for Monday, October 31, 2011

  CodePlex Daily Summary for Monday, October 31, 2011Popular ReleasesWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.24: New features in the 1.24 release: - Added MFI indicatorPROFIT: 1.1.0.102: Removed Attributes from agent and extensions Updated Modules with last data Added Elite T2 and T4 modules Modified sensor strength calculation to reflect ECCM module changesBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Home Access Plus+: v7.6: This download now (31/10/11 6pm) includes the v7.6.1031.1800 patch Changes: New Download Routing Handler: Support for Pausing/Resuming Downloads Should fix OfficeOpenXML files when you download and it corrupts Update MyFiles ALPHA: Updated Layout of some elements on the tiles Details View Added with a table Update Booking System: Fixed some issues found since the v7.5 release Added support for spaces in Resource names Fixed some issues with the Booking System Admin page Added SI...Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...WriteableBitmapEx: WriteableBitmapEx 0.9.8.5: Added a Rotate method for arbitrary angles (RotateFree). Provided by montago. See http://writeablebitmapex.codeplex.com/workitem/15214 Added Nokola's anti-aliased line drawing implementation. http://nokola.com/blog/post/2010/10/14/Anti-aliased-Lines-And-Optimizing-Code-for-Windows-Phone-7e28093First-Look.aspx Updated the Windows Phone project to WP 7.1 Mango. Added an extension file for the Windows Phone specific extensions and added the SaveToMediaLibrary extension including support fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Now the the SMinimum and SMaximum par...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngNicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)New ProjectsagsXMPP-facebook: This is a fork of agsXMPP library (http://www.ag-software.de/agsxmpp-sdk/) that brings support for X-FACEBOOK-PLATFORM SASL mechanism. Tags: xmpp, facebook, chat, agsxmpp, .net, C#Azure Toss: With the booming of personal devices (such as iPad and Windows 8 tablets) and cloud-based services (such as Azure and iCloud), we are entering an era of highly connected yet very loosely coupled applications and services. As ISVs and application developers, you’ll find your applications need to communicate with many other applications and services in a “non-binding” way - there are no hard commitments among the applications and services to work together. Instead, services and features are dis...Backup MS Outlook: Console program to copy all active (usage) pst files from default Microsoft Outlook to backup folder. It's stripped down and modified version of the program backupmymail.codeplex.com. Program to copy file using VSS (Volume shadow service) through hobocopy(c) program.BoxWorld: Welcome to BoxWorld. Also known as Sokoban. This application/game was designed as an experiment really! I remember playing this game on my graphing calculator many years ago. And even with this, it's not so much as the game as it was making the game.com-binbin-reader: rss reader Priority Inbox Spam Custom CssLink control for the wiki pages of a SharePoint 2010 team site: Replace the native CssLink by this custom control for removing the OOTB RTE styles in a wiki page of SharePoint 2010 Foundation. This custom control wraps the native one in order to remove the link to the OOTB corev4.css that remains in the wiki pages while using an alternate CSS. Droppoint: Drop your file to sharepointEvents&Handlers: Implementing example for events and handlers in CLR via C#KIVA AIP for C# 4: A C#4 API implementation of the KIVA API found at http://build.kiva.org/apiKKScada: KKScada is a scada projectKoober: Koober is a .NET framework based visually appealing Ebook creator for Windows. It has a pre defined format using SQLite database as book files. Lighter: Text to Braille: Lighter is an extensible and flexible Thai/English and further language translation to Braille format.Lynx Toolkit: A collection of small command line developer tools.Michael's Code: this is michael's code.Passwords Thief: Sometimes you need to see what is behind asteriks in password edit box. It will help you to resolve this problem. PET@runtime: PET@runtime provides additional components to PET, especially for supporting PET outcomes at project execution time in several tools, e.g. Word or TFS.ProduzioneWebFlora: cascascaResources Over MVC: Resources Over MVC provides extensions for ASP.Net MVC to support the typical features of a REST web service. These include support for multiple representations, encodings and a number of ways of overloading POST. Regardless of your opinion of what makes a RESTful service, these can help.Servelat Pieces: Servelat Pieces is a collection of reusable bits of code that can make you Silverlight development easier. You'll be able to simplify the code which consumed server-side WCF services. It may greatly simplify your Sillverlight unit testing experience.Silverlight Sphere Control: This is a Silverlight spherical selection control that I built that uses the projection transformations in Silverlight. It includes several modes (including random, rows, columns, vertical carousel, horizontal carousel, and checkered) and events. Upon selecting one of the elements (which are arranged in a spherical pattern, hence the name), the sphere rotates until the control is at the front face of the sphere. Events are available to hook into (on element selected, rotation finished,...WinRT File Based Database: This database is based on a file system in Windows 8 and is using WinRT (Windows Runtime) in Windows 8 environment and thus can be used for Metro style applications. It includes simple, yet effective API that allows you to create tables based on classes. xianshihai--nothing to display: nothing to display

  Read the article

• CodePlex Daily Summary for Tuesday, November 20, 2012

  CodePlex Daily Summary for Tuesday, November 20, 2012Popular ReleasesTwitter Bootstrap for SharePoint: Twitter Bootstrap Master Page for SharePoint 2010: Twitter Bootstrap Master Page for SharePoint 2010 Version 1.0 Beta by Liam Powell @LiamPowell87 for more information visit my blog http://www.LiamPowell.com .WSP file can be deployed to SharePoint using powershell .Rar file contains sourceJson.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...HigLabo: HigLabo_20121119: HigLabo_2012111 --HigLabo.Mail-- Modify bug fix of ExecuteAppend method. Add ExecuteXList method to ImapClient class. --HigLabo.Net.WindowsLive-- Add AsyncCall to WindowsLiveClient class.mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectxUnit.net Contrib: xunitcontrib-resharper 0.7 (RS 7.1, 6.1.1): xunitcontrib release 0.6.1 (ReSharper runner) This release provides a test runner plugin for Resharper 7.1 RTM and 6.1.1, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release drops 7.0 support and targets the latest revisions of the last two major versions of ReSharper (namely 7.0 and 6.1.1). Copies of the plugin that support previous verions of ReSharper can be downloaded from this release. Also note that all builds work against ALL ...OnTopReplica: Release 3.4: Update to the 3 version with major fixes and improvements. Compatible with Windows 8. Now runs (and requires) .NET Framework v.4.0. Added relative mode for region selection (allows the user to select regions as margins from the borders of the thumbnail, useful for windows which have a variable size but fixed size controls, like video players). Improved window seeking when restoring cloned thumbnail or cloning a window by title or by class. Improved settings persistence. Improved co...DotSpatial: DotSpatial 1.4: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.5: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes Docum...New ProjectsAzzeton: azzetonBadminton: Source codeBitFox Expression Evaluator: Integrate evaluation of expressions wrote in fox language into your app. Part of BITFOX, a project to help in migration of Visual Foxpro apps to .NET world.Brunch: Brunch is a Visual Studio 2008 add-in that shows the name of a code branch in a toolbar that you can place wherever you want. You'll no longer have to inspect the path of a file in your project to find out which branch you are working in.CapturePoint365 - an Office 365 extension to Cropper: CapturePoint365 - an Office 365 extension to Cropper utility. CLR Profiler: Provides downloads for those who want to use a profiler of managed code, and those who want to write a profiler of managed code.CMS KickStart: Working on building a Content Management System.cricketcodeplex: uploading projectDanish Language Pack for Community Server: Danish Language Packs for Community Server 2.1 and 2007. At its inception, this project contains quite incomplete translations to Danish. This project provides a common resource where all interested parties can gradually improve on this language pack. Please join to improve the contents. The source code tree contains two major folders: One for Community Server 2.1 and one for Community Server 2007.Data Workflow Activities: OData and SQL Server Workflow Activities and DesignersDelegateMock: DelegateMock is C# library for mocking and stubbing delegates.DevMango: MongoDB ToolEasyIADP Application Component: EasyIADP application component is built for application which want to integrate to Intel AppUp Center. Enterprise Library Logging Dynamics Crm 2011 Trace Listener: Enterprise Library Trace Listener that writes to Microsoft Dynamics CRM 2011, formatting the output with an ILogFormatterEPiServer Customizable Page Reference Properties: Customizable PageReference and LinkCollection properties for EPiServer. Allows to easily setup root page and available types for selecting. This project uses cool <a href="http://episerverfpr.codeplex.com">Filtered Page Reference</a> library written by <a href="http://world.episerver.com/Blogs/Lee-Crowe">Lee Crowe</a>. For more information look at this blog post: <a href="http://dotnetcake.blogspot.com/2011/08/episerver-filtered-page-reference-easy.html">EPiServer Filtered Page Referen...exSnake: exSnake is a C# version of the classic game Snake.Friday Shopping: Windows Mobile applicationHIC Projects Home: HIC's central public location for source control, file collaboration and project management.Infinite DoWork: Example of an infinite loop.Kinect n Touch to WWT: Using Kinect and Touch devices with WWT - worldwide telescopeKoka: Koka is a function-oriented strongly typed language that separates pure values from side-effecting computations. Laboratório de Engenharia de Software - Projeto: Criado para estudar e aplicar novas tecnologias web.M26WC - Mono 2.6 Wizard Control: Wizard which runs under Mono2.6 A fork of: http://aerowizard.codeplex.com/Mercado seguridad: Este es mi summaryMVC 4 Web d?t tour du l?ch: Web d?t tour du l?ch mvc 4ObjectMerger: ObjectMerger is a class library with extension methods for merging two different objects of the same (generic) type. It's developed in C#. omr.selector.js: Easy dom selectorORM-Micro: ORM-Micro Easiest and fastest Micro ORM, you've got the queries, you've got the objects, take the best of two worlds !Primary5choo1: ????????DEMOProject1327: wdPubSync: Visual Studio's publishing solutions are slow and somewhat unreliable. PubSync is my solution to these issues. Rhythm Comet: Jogo em C# utilizando o framework XNARuntime Hello Worlds: Runtime Hello Worlds is a very simple project demonstrating a number of ways of implementing "Hello, World" in C#/.NET 4.0 in runtime generated and/or bound code.SeguridadDeSistemas: sumarySercury: ????????，????WCF??????????????。Setup Project Tuner: A VisualStudio addin that gives you some additional views on your setup project (.vdproj) filesSimple Sales Tracking CRM API Wrapper: The Simple Sales Tracking API Wrapper, enables easy extention development and integration with the hosted service at http://www.simplesalestracking.comSkincaretips: Skincare tips coding shownSQScriptRunner: Simple Quick Script Runner allows an administrator to run T-SQL Scripts against one or more servers with common characteristics. For example, an maintenance script might be targeted at a list of mirrored servers, or a list of computers running SQL Express.SystemHelperLibrary: Some helper classesTask Manager Nuke: How to write a dotnetnuke moduleThe TVDB API: Library to utilise The TVDB API.Thermo: This is the software developed for my PhD. It's about computing thermal properties of materials using first principles quantum mechanics.tool projects: Tool Projectstourism: updateVirtualPoSH Script Repository: This is the VirtualPoSH Script Repository!Wheel of Jeopardy: This is the repository for Wheel of Jeopardy project for Software Engineering 605.401.82 SU10 class.

  Read the article

• Adding SQL Cache Dependencies to the Loosely coupled .NET Cache Provider

  - by Rhames

  This post adds SQL Cache Dependency support to the loosely coupled .NET Cache Provider that I described in the previous post (http://geekswithblogs.net/Rhames/archive/2012/09/11/loosely-coupled-.net-cache-provider-using-dependency-injection.aspx). The sample code is available on github at https://github.com/RobinHames/CacheProvider.git. Each time we want to apply a cache dependency to a call to fetch or cache a data item we need to supply an instance of the relevant dependency implementation. This suggests an Abstract Factory will be useful to create cache dependencies as needed. We can then use Dependency Injection to inject the factory into the relevant consumer. Castle Windsor provides a typed factory facility that will be utilised to implement the cache dependency abstract factory (see http://docs.castleproject.org/Windsor.Typed-Factory-Facility-interface-based-factories.ashx). Cache Dependency Interfaces First I created a set of cache dependency interfaces in the domain layer, which can be used to pass a cache dependency into the cache provider. ICacheDependency The ICacheDependency interface is simply an empty interface that is used as a parent for the specific cache dependency interfaces. This will allow us to place a generic constraint on the Cache Dependency Factory, and will give us a type that can be passed into the relevant Cache Provider methods. namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheDependency { } }   ISqlCacheDependency.cs The ISqlCacheDependency interface provides specific SQL caching details, such as a Sql Command or a database connection and table. It is the concrete implementation of this interface that will be created by the factory in passed into the Cache Provider. using System; using System.Collections.Generic; using System.Linq; using System.Text;   namespace CacheDiSample.Domain.CacheInterfaces { public interface ISqlCacheDependency : ICacheDependency { ISqlCacheDependency Initialise(string databaseConnectionName, string tableName); ISqlCacheDependency Initialise(System.Data.SqlClient.SqlCommand sqlCommand); } } If we want other types of cache dependencies, such as by key or file, interfaces may be created to support these (the sample code includes an IKeyCacheDependency interface). Modifying ICacheProvider to accept Cache Dependencies Next I modified the exisitng ICacheProvider<T> interface so that cache dependencies may be passed into a Fetch method call. I did this by adding two overloads to the existing Fetch methods, which take an IEnumerable<ICacheDependency> parameter (the IEnumerable allows more than one cache dependency to be included). I also added a method to create cache dependencies. This means that the implementation of the Cache Provider will require a dependency on the Cache Dependency Factory. It is pretty much down to personal choice as to whether this approach is taken, or whether the Cache Dependency Factory is injected directly into the repository or other consumer of Cache Provider. I think, because the cache dependency cannot be used without the Cache Provider, placing the dependency on the factory into the Cache Provider implementation is cleaner. ICacheProvider.cs using System; using System.Collections.Generic;   namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheProvider<T> { T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies);   IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies);   U CreateCacheDependency<U>() where U : ICacheDependency; } }   Cache Dependency Factory Next I created the interface for the Cache Dependency Factory in the domain layer. ICacheDependencyFactory.cs namespace CacheDiSample.Domain.CacheInterfaces { public interface ICacheDependencyFactory { T Create<T>() where T : ICacheDependency;   void Release<T>(T cacheDependency) where T : ICacheDependency; } }   I used the ICacheDependency parent interface as a generic constraint on the create and release methods in the factory interface. Now the interfaces are in place, I moved on to the concrete implementations. ISqlCacheDependency Concrete Implementation The concrete implementation of ISqlCacheDependency will need to provide an instance of System.Web.Caching.SqlCacheDependency to the Cache Provider implementation. Unfortunately this class is sealed, so I cannot simply inherit from this. Instead, I created an interface called IAspNetCacheDependency that will provide a Create method to create an instance of the relevant System.Web.Caching Cache Dependency type. This interface is specific to the ASP.NET implementation of the Cache Provider, so it should be defined in the same layer as the concrete implementation of the Cache Provider (the MVC UI layer in the sample code). IAspNetCacheDependency.cs using System.Web.Caching;   namespace CacheDiSample.CacheProviders { public interface IAspNetCacheDependency { CacheDependency CreateAspNetCacheDependency(); } }   Next, I created the concrete implementation of the ISqlCacheDependency interface. This class also implements the IAspNetCacheDependency interface. This concrete implementation also is defined in the same layer as the Cache Provider implementation. AspNetSqlCacheDependency.cs using System.Web.Caching; using CacheDiSample.Domain.CacheInterfaces;   namespace CacheDiSample.CacheProviders { public class AspNetSqlCacheDependency : ISqlCacheDependency, IAspNetCacheDependency { private string databaseConnectionName;   private string tableName;   private System.Data.SqlClient.SqlCommand sqlCommand;   #region ISqlCacheDependency Members   public ISqlCacheDependency Initialise(string databaseConnectionName, string tableName) { this.databaseConnectionName = databaseConnectionName; this.tableName = tableName; return this; }   public ISqlCacheDependency Initialise(System.Data.SqlClient.SqlCommand sqlCommand) { this.sqlCommand = sqlCommand; return this; }   #endregion   #region IAspNetCacheDependency Members   public System.Web.Caching.CacheDependency CreateAspNetCacheDependency() { if (sqlCommand != null) return new SqlCacheDependency(sqlCommand); else return new SqlCacheDependency(databaseConnectionName, tableName); }   #endregion   } }   ICacheProvider Concrete Implementation The ICacheProvider interface is implemented by the CacheProvider class. This implementation is modified to include the changes to the ICacheProvider interface. First I needed to inject the Cache Dependency Factory into the Cache Provider: private ICacheDependencyFactory cacheDependencyFactory;   public CacheProvider(ICacheDependencyFactory cacheDependencyFactory) { if (cacheDependencyFactory == null) throw new ArgumentNullException("cacheDependencyFactory");   this.cacheDependencyFactory = cacheDependencyFactory; }   Next I implemented the CreateCacheDependency method, which simply passes on the create request to the factory: public U CreateCacheDependency<U>() where U : ICacheDependency { return this.cacheDependencyFactory.Create<U>(); }   The signature of the FetchAndCache helper method was modified to take an additional IEnumerable<ICacheDependency> parameter:   private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) and the following code added to create the relevant System.Web.Caching.CacheDependency object for any dependencies and pass them to the HttpContext Cache: CacheDependency aspNetCacheDependencies = null;   if (cacheDependencies != null) { if (cacheDependencies.Count() == 1) // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aspNetCacheDependencies = ((IAspNetCacheDependency)cacheDependencies.ElementAt(0)).CreateAspNetCacheDependency(); else if (cacheDependencies.Count() > 1) { AggregateCacheDependency aggregateCacheDependency = new AggregateCacheDependency(); foreach (ICacheDependency cacheDependency in cacheDependencies) { // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aggregateCacheDependency.Add(((IAspNetCacheDependency)cacheDependency).CreateAspNetCacheDependency()); } aspNetCacheDependencies = aggregateCacheDependency; } }   HttpContext.Current.Cache.Insert(key, value, aspNetCacheDependencies, absoluteExpiry.Value, relativeExpiry.Value);   The full code listing for the modified CacheProvider class is shown below: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Caching; using CacheDiSample.Domain.CacheInterfaces;   namespace CacheDiSample.CacheProviders { public class CacheProvider<T> : ICacheProvider<T> { private ICacheDependencyFactory cacheDependencyFactory;   public CacheProvider(ICacheDependencyFactory cacheDependencyFactory) { if (cacheDependencyFactory == null) throw new ArgumentNullException("cacheDependencyFactory");   this.cacheDependencyFactory = cacheDependencyFactory; }   public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) { return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry, null); }   public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry, cacheDependencies); }   public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) { return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry, null); }   public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry, cacheDependencies); }   public U CreateCacheDependency<U>() where U : ICacheDependency { return this.cacheDependencyFactory.Create<U>(); }   #region Helper Methods   private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry, IEnumerable<ICacheDependency> cacheDependencies) { U value; if (!TryGetValue<U>(key, out value)) { value = retrieveData(); if (!absoluteExpiry.HasValue) absoluteExpiry = Cache.NoAbsoluteExpiration;   if (!relativeExpiry.HasValue) relativeExpiry = Cache.NoSlidingExpiration;   CacheDependency aspNetCacheDependencies = null;   if (cacheDependencies != null) { if (cacheDependencies.Count() == 1) // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aspNetCacheDependencies = ((IAspNetCacheDependency)cacheDependencies.ElementAt(0)).CreateAspNetCacheDependency(); else if (cacheDependencies.Count() > 1) { AggregateCacheDependency aggregateCacheDependency = new AggregateCacheDependency(); foreach (ICacheDependency cacheDependency in cacheDependencies) { // We know that the implementations of ICacheDependency will also implement IAspNetCacheDependency // so we can use a cast here and call the CreateAspNetCacheDependency() method aggregateCacheDependency.Add( ((IAspNetCacheDependency)cacheDependency).CreateAspNetCacheDependency()); } aspNetCacheDependencies = aggregateCacheDependency; } }   HttpContext.Current.Cache.Insert(key, value, aspNetCacheDependencies, absoluteExpiry.Value, relativeExpiry.Value);   } return value; }   private bool TryGetValue<U>(string key, out U value) { object cachedValue = HttpContext.Current.Cache.Get(key); if (cachedValue == null) { value = default(U); return false; } else { try { value = (U)cachedValue; return true; } catch { value = default(U); return false; } } }   #endregion } }   Wiring up the DI Container Now the implementations for the Cache Dependency are in place, I wired them up in the existing Windsor CacheInstaller. First I needed to register the implementation of the ISqlCacheDependency interface: container.Register( Component.For<ISqlCacheDependency>() .ImplementedBy<AspNetSqlCacheDependency>() .LifestyleTransient());   Next I registered the Cache Dependency Factory. Notice that I have not implemented the ICacheDependencyFactory interface. Castle Windsor will do this for me by using the Type Factory Facility. I do need to bring the Castle.Facilities.TypedFacility namespace into scope: using Castle.Facilities.TypedFactory;   Then I registered the factory: container.AddFacility<TypedFactoryFacility>();   container.Register( Component.For<ICacheDependencyFactory>() .AsFactory()); The full code for the CacheInstaller class is: using Castle.MicroKernel.Registration; using Castle.MicroKernel.SubSystems.Configuration; using Castle.Windsor; using Castle.Facilities.TypedFactory;   using CacheDiSample.Domain.CacheInterfaces; using CacheDiSample.CacheProviders;   namespace CacheDiSample.WindsorInstallers { public class CacheInstaller : IWindsorInstaller { public void Install(IWindsorContainer container, IConfigurationStore store) { container.Register( Component.For(typeof(ICacheProvider<>)) .ImplementedBy(typeof(CacheProvider<>)) .LifestyleTransient());   container.Register( Component.For<ISqlCacheDependency>() .ImplementedBy<AspNetSqlCacheDependency>() .LifestyleTransient());   container.AddFacility<TypedFactoryFacility>();   container.Register( Component.For<ICacheDependencyFactory>() .AsFactory()); } } }   Configuring the ASP.NET SQL Cache Dependency There are a couple of configuration steps required to enable SQL Cache Dependency for the application and database. From the Visual Studio Command Prompt, the following commands should be used to enable the Cache Polling of the relevant database tables: aspnet_regsql -S <servername> -E -d <databasename> –ed aspnet_regsql -S <servername> -E -d CacheSample –et –t <tablename>   (The –t option should be repeated for each table that is to be made available for cache dependencies). Finally the SQL Cache Polling needs to be enabled by adding the following configuration to the <system.web> section of web.config: <caching> <sqlCacheDependency pollTime="10000" enabled="true"> <databases> <add name="BloggingContext" connectionStringName="BloggingContext"/> </databases> </sqlCacheDependency> </caching>   (obviously the name and connection string name should be altered as required). Using a SQL Cache Dependency Now all the coding is complete. To specify a SQL Cache Dependency, I can modify my BlogRepositoryWithCaching decorator class (see the earlier post) as follows: public IList<Blog> GetAll() { var sqlCacheDependency = cacheProvider.CreateCacheDependency<ISqlCacheDependency>() .Initialise("BloggingContext", "Blogs");   ICacheDependency[] cacheDependencies = new ICacheDependency[] { sqlCacheDependency };   string key = string.Format("CacheDiSample.DataAccess.GetAll");   return cacheProvider.Fetch(key, () => { return parentBlogRepository.GetAll(); }, null, null, cacheDependencies) .ToList(); }   This will add a dependency of the “Blogs” table in the database. The data will remain in the cache until the contents of this table change, then the cache item will be invalidated, and the next call to the GetAll() repository method will be routed to the parent repository to refresh the data from the database.

  Read the article

• CodePlex Daily Summary for Tuesday, October 23, 2012

  CodePlex Daily Summary for Tuesday, October 23, 2012Popular ReleasesDNN Module Creator: 01.01.00: Updated templates for DNN7 ( ie. DAL2, Web Service API ). Numerous bug fixes and enhancements.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...ltxml.js - LINQ to XML for JavaScript: 1.0 - Beta 1: First release!EvoGame: EvoGame PreAlpha v0.0.2_c InDev: Yup, a new update, go the sprites working.Ficharts.Net: 1.0 Alpha: ??Ficharts????、???????????，?? ??/???、??/???、???、??/???ZXMAK2: Version 2.6.6.0: + fix refresh debugger after open RZX file + add NoFlic video filterSQLLib: Alpha release 17: Added CLR UDFs: * clr.fn_regex_instr - similar to Oracle REGEX_INSTR * clr.fn_regex_substr - similar to Oracle REGEX_SUBSTR To deploy CLR objects copy ClrAgg.dll and ClrRegEx.dll to a folder of you choice (currently deployment script points to C:\Program Files\Microsoft SQL Server\100\CLR\ClrAgg.dll) and execute deployment scripts InstallCLRAggregates.sql and InstallCLRRegEx.sql Thank you for rating the download and/or your feedback.EPiServer CMS ElencySolutions.MultipleProperty: ElencySolutions.MultipleProperty v1.6.3: The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London). Installation notes The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below: Embedded: <location path="util/ElencySolutionsMultipleP...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...MCEBuddy 2.x: MCEBuddy 2.3.4: Changelog for 2.3.4 (32bit and 64bit) 1. Fixed a bug introduced in 2.3.3 that would cause HD recordings and recordings with multiple audio channels to fail. 2. Updated <encoder-unsupported> option to compare with all Audio tracks for videos with multiple audio tracks. 3. Fixed a bug with SRT and EDL files, when input and output directory are the same the files are not preserved.BlogEngine.NET: BlogEngine.NET 2.7 RC: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! dot This is a Release Candidate version for BlogEngine.NET 2.7. The most current, stable version of BlogEngine.NET is version 2.6. Find out more about the BlogEngine.NET 2.7 RC here. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions...Pulse: Pulse 0.6.3.0: Fixed a number of bugs that showed up since my update yesterday. Fixes included are for: - Weird issue where the initial "Nature" wallbase.cc search would duplicate itself - After changing a providers settings it wouldn't take affect until you restarted Pulse (removing or adding a provider entirely did take effect though) - Another small issue with the regex for the wallbase.cc wallpapers that I tweaked yesterday, seems good now though.Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...New ProjectsAddition of two numbers: Addition of two integer numbersAddTwoNumbers: Add two numbersASP_BANMAYTINH: Xây d?ng web bán máy tính b?ng ASPAvalon MVC: Do not use, still in alphaCaio Proiete's HG Playground: Simple test project to leverage Mercurial features using CodePlexCaio Proiete's TFS Playground: Simple test project to leverage TFS features using CodePlexcodeplexaddproject: Task 1 adding two numbers.Compresor markov orden 1 shannon: Compresor de fuentes basado en el algoritmo de shannon con markov orden 1Cricket Mania: addd39 grid system: A web-based combat grid system for use in play-by-post DnD (or similar) role playing games.DarkSky Tagit: An Orchard module that exposes the jQuery Tagit plugin written by Hailwood as a script resource.DnnExpert: ??? ????? ?? ???? ???? ????? ? ???? ??? ?????? ??? ?? ???? ?? ???? ?? ???????? ???? ?? ???? ??? ???? ?? ?? ? ?????? ????? ???? ? ?????? ? ???? ???? ?? ????.Expandable Text/HTML for DotNetNuke by IowaComputerGurus Inc.: The DNN Expandable Text/HTML module allows you to display multiple text items with the ability to expand and collapse individual items.FarajsWeb2Project: This project is intended to design a Web2.0 website for 7COM0203 ModuleGeminorum Software Contacts for DotNetNuke: A simple contact manager for DotNetNuke.GitText: Test olyGoDarting by Harsh Maurya: Darts Game developed in WPF. requires .Net Framework 4.0Info Gempa BMKG: Aplikasi pembaca informasi gempa BMKGMassive encryption of files: "Massive Encrypt" allows you to encrypt or rename many files at once. Of course you can decrypt later encrypted files!Metal Player: Simple and easy to use, Metal Player has basic multimedia player functions, and some new functions that will enjoy you.NAntDefineTasks: NAnt Define Tasks allows you to define NAnt tasks in terms of other NAnt tasks, instead of having to write any C# code. Nebulosa: Nebulosa is a complete engine to create a complete websitesNigeria Single Mothers: This website project helps single mothers in Nigeria share ideas on how to raise children given the socio-economic and cultural challenges they face.PCV_Clinic_Pro: PCVClinicPro is a software proRendering.NET: Rendering.NET is an abstraction for any visualization device and over several APIs like OpenGL, DirectX, XNA, WebGL, WPF, Silverlight, Mobile DirectX, etc.RLA: A template for illustrate a MVC2 websiteSecure Password Recovery for DotNetNuke by IowaComputerGurus Inc.: IowaComputerGurus's Secure Password Recovery module is the next step in preventing user passwords from being sent via e-mail!SimpleSum: This calculates a simple sum using Visual Basic.SiteCetic: Sitio de CETIC Social Learning: Social Learning Project for BC 2012Towards a generic DSL for modeling page types in WCMSs: An exploration of creating DSLs to facilitate the creation of page models in WCMSs using VMSDK. The concepts of PIM, PSM, DSL, M2M, and M2T will be explored.TrafficArchives: TrafficArchives is a two people group of TrafficArchives team, in this project ,we will use asp.net do Traffic Archives information manager system.UnivDevs: university test developmentUppityUp: UppityUp is a simple and light-weight tray application which monitors a remote server and shows a notification when it comes online. This is useful when you need to connect to a server that is currently down and you want to be notified the moment it becomes available.uurrooster: Hier wordt nog aan gewerktUWE Computer Science: A collection of all work submitted and completed during my course at UWE - Bristol.ViewMyDeals: This Site is all about sharing dramatic deals and offers of several products using Promotional codes and vouchers .WebUntis4Win8: WebUntis4Win8X.MetaWeblog.Model: This is a model for MetaWeblog API. Detail info at: http://xmlrpc.scripting.com/metaWeblogApi.html http://en.wikipedia.org/wiki/MetaWeblogXPath execution utility: CommonXPath is a utility to execute an XPath expression on some XML and see the result.

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >