Search Results

Search found 41598 results on 1664 pages for 'segmentation fault'.

Page 268/1664 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• Alternatives to native LDAP

  - by Matt

  We've implemented an LDAP to NIS solution and have begun transitioning some systems to native LDAP binding for authentication and automount maps. Unfortunately we have a very mixed environment with more than 20 *nix environments. The setup for each variant is of course unique and has required various workarounds to get full functionality. We're now at the point where we're willing to revisit the solution and possibly migrate toward something like Likewise (http://www.likewise.org), but would like to know what others are using to solve this problem.

  Read the article

• Should a webserver in the DMZ be allowed to access MSSQL in the LAN?

  - by Allen

  This should be a very basic question and I tried to research it and couldn't find a solid answer. Say you have a web server in the DMZ and a MSSQL server in the LAN. IMO, and what I've always assumed to be correct, is that the web server in the DMZ should be able to access the MSSQL server in the LAN (maybe you'd have to open a port in the firewall, that'd be ok IMO). Our networking guys are now telling us that we can't have any access to the MSSQL server in the LAN from the DMZ. They say that anything in the DMZ should only be accessible FROM the LAN (and web), and that the DMZ should not have access TO the LAN, just as the web does not have access to the LAN. So my question is, who is right? Should the DMZ have access to/from the LAN? Or, should access to the LAN from the DMZ be strictly forbidden. All this assumes a typical DMZ configuration.

  Read the article

• what port should I open for mysql master-master replication?

  - by Vanddel

  I have two servers running php5-fpm and a load balancer running nginx, the three servers share /var/www/drupal using nfs. nfs is working correctly. I replicated the two servers' database using mysql master master replication. everything was working fine till I added my iptables rules. In my iptables script, I first drop all chains then I accept the ones I want, other than that there are no other drop statements. I opened port 3306 for mysql replication like this : (the rule is on both servers ) iptables -A INPUT -p tcp -s $ip_Of_Other_Server --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d $ip_Of_Other_Server --sport 3306 -j ACCEPT The problem is, when I run both servers and I try to log in using my account on drupal it doesn't log in although I find a successful log in attempt in drupal logs. When I run only one server of them I can log in normally. when I allow everything in my iptables rules it works normally. I believe there's some port I need to open using iptables for the replication to work correctly but I can't find which one to open.

  Read the article

• rsync ssh not working in crontab after reboot

  - by kabeer

  I was using a script to perform rsync in sudo crontab. The script does a 2-way rsync (from serverA to serverB and reverse). the rsync uses ssh to connect between servers. After i reboot both the server machines, the rsync is not working in sudo crontab. I also setup a new cronjob and it fails, The error is: rsync error: unexplained error (code 255) at io.c(600) [sender=3.0.6] rsync: connection unexpectedly closed (0 bytes received so far) [receiver] However, when run from terminal, the rync script works as expected without issues. please help. looks like issue with ssh. however, i am able to ssh into either servers withoiut issues.

  Read the article

• ActiveSync / Exchange 2007 password expiration buffer on device

  - by Matt Hamende

  I'm trying to determine if there is any buffer of time from the time a password expires in AD to the time that users would stop receiving email on their mobile devices our setup is Exchange 2007 ActiveSync DC's are Server 2008 R2 primarily Android shop, with maybe a few iOS devices I've heard some rumors of people still receiving email after their password expired / changed on the domain, just want to see if anyone else has ever heard of this. Did a bit more reading, read about Token Cache in IIS 7.0 and 15min lagtime, still would like to hear any thoughts about this.

  Read the article

• How to force certain traffic through GRE tunnel?

  - by wew

  Here's what I do. Server (public internet is 222.x.x.x): echo 'net.ipv4.ip_forward=1' >> /etc/sysctl.conf sysctl -p iptunnel add gre1 mode gre local 222.x.x.x remote 115.x.x.x ttl 255 ip add add 192.168.168.1/30 dev gre1 ip link set gre1 up iptables -t nat -A POSTROUTING -s 192.168.168.0/30 -j SNAT --to-source 222.x.x.x iptables -t nat -A PREROUTING -d 222.x.x.x -j DNAT --to-destination 192.168.168.2 Client (public internet is 115.x.x.x): iptunnel add gre1 mode gre local 115.x.x.x remote 222.x.x.x ttl 255 ip add add 192.168.168.2/30 dev gre1 ip link set gre1 up echo '100 tunnel' >> /etc/iproute2/rt_tables ip rule add from 192.168.168.0/30 table tunnel ip route add default via 192.168.168.1 table tunnel Until here, all seems going right. But then 1st question, how to use GRE tunnel as a default route? Client computer is still using 115.x.x.x interface as default. 2nd question, how to force only ICMP traffic to go through tunnel, and everything else go default interface? I try doing this in client computer: ip rule add fwmark 200 table tunnel iptables -t mangle -A OUTPUT -p udp -j MARK --set-mark 200 But after doing this, my ping program will timeout (if I not doing 2 command above, and using ping -I gre1 ip instead, it will works). Later I want to do something else also, like only UDP port 53 through tunnel, etc. 3rd question, in client computer, I force one mysql program to listen on gre1 interface 192.168.168.2. In client computer, there's also one more public interface (IP 114.x.x.x)... How to forward traffic properly using iptables and route so mysql also respond a request coming from this 114.x.x.x public interface?

  Read the article

• Change sysout logging level for Weblogic

  - by Justin Voss

  When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

  Read the article

• Windows Server 2008 RAID10

  - by JT

  Hello All, I am building a storage system for myself. I have a 16 bay SATA chasis and right now I have 1 x 500GB SATA for booting 8 x 1.5TB for data. 3Ware 9500S-8 RAID card where these 8 drives above are connected to. I am used to linux, but not in the RAID department. I have Windows experience too. What I am looking for is something that I can just let sit, be reliable and use for other items as well. (Like running test websites, Apache, MySQL, etc). This box is private on a Class-C subnet. My thought is to at least consider Windows Server 2008. I especially like the potential for NON-GUI Mode. Can Windows Server 2008 do a Software RAID 10 out of the box? Software RAID is better performance and better in case the raid needs to be moved to another machine? I just want to SCP files, so OpenSSH running on it? Can one install the GUI, but not use it unless they get in a bind? Is Windows a good idea or should I stick to a Linux Software RAID or FreeBSD + ZFS?

  Read the article

• pfsense single MAC is listed with several IP's in ARP table

  - by Tillebeck

  I have this problem: arp table filling up But I am quite sure that I cannot blame Kaspersky. Scenarie: a user plugs his computer in. He waits and waits but are getting no IP by DHCP. Then he is told there is an IP conflict... He end up assigning himself a static IP to access the net In the ARP table of the router I see: 192.168.24.144 00:16:41:42:3c:9e Lenovo LAN 192.168.24.145 00:16:41:42:3c:9e Lenovo LAN 192.168.24.181 00:16:41:42:3c:9e Lenovo LAN 192.168.24.150 00:16:41:42:3c:9e Lenovo LAN 192.168.24.151 00:16:41:42:3c:9e Lenovo LAN 192.168.24.152 00:16:41:42:3c:9e Lenovo LAN 192.168.24.156 00:16:41:42:3c:9e Lenovo LAN 192.168.24.157 00:16:41:42:3c:9e Lenovo LAN 192.168.24.159 00:16:41:42:3c:9e Lenovo LAN 192.168.24.160 00:16:41:42:3c:9e Lenovo LAN 192.168.24.130 00:16:41:42:3c:9e Lenovo LAN 192.168.24.132 00:16:41:42:3c:9e Lenovo LAN 192.168.24.164 00:16:41:42:3c:9e Lenovo LAN 192.168.24.137 00:16:41:42:3c:9e Lenovo LAN 192.168.24.140 00:16:41:42:3c:9e Lenovo LAN 192.168.24.206 00:16:41:42:3c:9e Lenovo LAN The last .206 is the static address he gave himself. Several users descripe the exact same problem. It started after removing some filters in the switches, så all users are on a LAN and can see each other. Before, when filters blocked access to each others comptuers no one reported this kind of behavior. Any idéeas?

  Read the article

• Cisco ASA and static IPv6 tunnel endpoint?

  - by Martijn Heemels

  I recently installed a Cisco ASA 5505 firewall on the edge of our LAN. The setup is simple: Internet <-- ASA <-- LAN I would like provide the hosts in the LAN with IPv6 connectivity by setting up a 6in4 tunnel to SixXS. It would be nice to have the ASA as tunnel endpoint so it can firewall both IPv4 and IPv6 traffic. Unfortunately the ASA apparently can't create a tunnel itself, and can't port-forward protocol 41 traffic, so I believe I would have to do one of the following instead: Set up a host with it's own IP outside the firewall, and have that function as tunnel-endpoint. The ASA can then firewall and route the v6 subnet to the LAN. Set up a host inside the firewall that functions as endpoint, separated via vlan or whatever, and loop the traffic back into the ASA where it can be firewalled and routed. This seems contrived, but would allow me to use a VM instead of a physical machine as endpoint. Any other way? What would you suggest is the optimal way to set this up? P.S. I do have a spare public IP address available if needed, and can spin up another VM in our VMware infrastructure.

  Read the article

• changing ext4 journal data mode with remount?

  - by Amos Shapira

  I'm tweaking ext4 file system for speed, one tweak at a time. First tweak is to change from "data=ordered" to "data=writeback". To test this, I execute "mount -n -o remount,data=ordered /" but I keep getting "mount: / not mounted already, or bad option". From lots of google'ing I found many questions about similar problems and one answer circa 2001+ext3 which says that you can't change the journal mode with remount. Is this limitation still current?

  Read the article

• WAMP server not starting and a mystery service is using port 80

  - by David Gard

  I'm using WAMP on Windows 7 and tonight I'm unable to start it (it's been working fine for about 3 years previously). I first checked the logs, but nothing in there. So I checked the Windows Event Viewer (eventvwr), where I saw 2x errors for each attempted start - The Apache service named reported the following error: (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80. The Apache service named reported the following error: no listening sockets available, shutting down. After this, I opened the command prompt and ran netstat -a, and to my surprise there were 3 entries for port 80 - Prot   Local Address  Foreign Address   State TCP   127.0.0.1:80       MyPCName:53831   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57834   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57839   TIME_WAIT From here, I'm kind of lost. As far as I can tell, something is utalising port 80, but I don't know what or why. If anyone is able to suggest what I might do next I'd be most greatful. Thanks.

  Read the article

• Ping only works after about 30 seconds

  - by Ricardo Polo

  Today I am working on this issue and I would love your ideas. There is a network with something like this LAN 1 -- WAN CHANNEL--- LAN 2 The LAN 1 have two segments. When I make a ping from LAN 1 segment 1 it works like a charm. When I make a ping from LAN 1 segment 2 I have no ping, but after about 30 seconds of continues ping (ping -t) it start to work perfect. After some time of no activity with the destination host the issue happens again. Tracing the route packets stops in the last router before the target. This is the first router in LAN 2 after the WAN channel. In the next screenshot you can see thie issue, the first ping is before a continuos ping and the second one is while continous ping is running. Thank you in advance

  Read the article

• Intel 520 SSD drives not working with lsi controller on VMware esxi 5

  - by Michael

  We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

  Read the article

• Route from Cisco ASA over site to site VPN

  - by Wookie321

  I want to be able to push f/w logging traffic to a server at a remote site. This server is accepting syslog traffic on port 514. In the ASA I've configured it to use this server as a syslog server. The Cisco f/w's inside interface address is 10.0.0.1 and I want to route over the link to an address of 192.168.1.1. The vpn is up and working between sites, and local clients at each site can access resources etc. How would I go about setting up the route from the f/w to this remote server only?

  Read the article

• How does enterprise failover, such as with google.com, actually work?

  - by Alex Regan

  We have a few fedora systems that are configured for web, FTP, and email services. We'd like to mirror these services, so that we can provide near 100% reliability for our users. I'm a fairly experienced Linux administrator, but don't have much experience with redundant systems. What is the best way to do this? How does google and amazon do it? Google.com resolves to multiple IP addresses, but if my local desktop caches one of the IPs that are unreachable, I'm going to get a failed connection message. How do they prevent that from happening? If one of their servers goes down, how is it automatically redirected to another system, without the end-user ever knowing it? I understand there are failover devices, but they're only for failing over the system itself, not a complete network. Let's say we have the worst-case scenario, such as my primary system becomes inaccessible. What are the fundamental components that are used on Linux systems to provide this capability? I'm looking for concepts, or approaches, not answers like "check out openstack". What are the actual pieces that make up the solution? What has to be done to implement this capability? Hopefully my question is clear. I'd like to know what the pieces are that make up a failover system and what approach is taken by successful organizations that implement it. Thanks again, Alex

  Read the article

• URL Redirection in Multisite wordpress

  - by Toqeer

  We have multi-site wordpress containing more then 50 blogs/sub-site. Our base URL to wordpress site is www.example.com/base-site/ and we have other sub-sites in it like www.example.com/base-site/site1 site2 ... etc. Now My question is to redirect the main-site to one of the subsites but a simple redirect 301 is not working. I tried some solutions of mod-rewrite but its not working either for this main-site to redirect to sub-site. A solution is required to Redirect www.example.com/base-site/ to www.example.com/base-site/site1 Solution used so far but not working for me solution1 solution2

  Read the article

• Setting up VSFTPD on AWS EC2 Instance

  - by Robert Ling III

  I'm trying to set up VSFTPD passive hosting on my EC2 instance. I ran through these instructions http://www.synergycode.com/knowledgebase/blog/item/ftp-server-on-amazon-ec2 . However, when I tried to connect in FileZilla, I got Command: CWD /home/lingiii/ftp Response: 250 Directory successfully changed. Command: TYPE I Response: 200 Switching to Binary mode Command: PASV Response: 227 Entering Passive Mode (10,222,206,33,54,184). Status: Server sent passive reply with unroutable address. Using server address instead. Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Where directory /home/lingiii/ftp is set to wrx permissions for user lingiii, group developers (of which lingiii is a member) AND I'm logging in as user lingiii. Any advice?

  Read the article

• Does MS Forefront TMG cache authentication?

  - by SnOrfus

  I'm testing a client machine that makes requests to a biztalk server using a forefront machine as a web proxy. Upon first test I put in an invalid name/password into the receive port and received the correct error message (407). Then, I set the correct name/password and everything worked correctly. From there, I kept the correct information in the receive port but put an invalid name/password into the send adapter but the process completed successfully (should have failed with 407). I've ensured that both the recieve and send ports are not bypassing the proxy for local addresses. So the only thing that seems to make sense is if TMG is caching the authentication request coming from the machine I'm working on. Is this thinking correct, and if so, does anyone know how to disable it in TMG?

  Read the article

• MTU, DSL router and stalling TCP

  - by user38843

  I am discovering stalling TCP connection problem. The problem arises when I try to scp stuff from remote system from my home network. My home network is connected to internet via PPPoE (ADSL+) and everything works perfectly once working from my home network. The ADSL router has MTU set to 1492 but with that setting the scp from remote system does not work - stalling! When I change the MTU on my router to 1500 the that scp works perfectly but internet accesses from my home network is very slow to most of the www sites - even local ones. Just wondering where the problem exists - my ISP blocking ICMP, etc? Thanks!

  Read the article

• Wild Card DNS setup problems

  - by Phil Jackson

  Hi, this is my firast time with dedicated servers and im having problem setting up a wildcard sub-domain. I previously tried * /-----/ 14400 /-----/ IN /-----/ A /-----/ (serverip) waited 30 hours and nothing. so i then tried * /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. waited another 30 hours, nothing Im now trying; *.actvbiz.co.uk /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. Am i doing this correctly? using WHM. Regards, Phil Jackson

  Read the article

• Turning a log file into a sort of circular buffer

  - by pachanga

  Folks, is there a *nix solution which would make the log file act as a circular buffer? For example, I'd like log files to store maximum 1Gb of data and discard the older entries once the limit is reached. Is it possible at all? I believe in order to achieve that a log file should be turned into some sort of special device... P.S. I'm aware of misc logrotating tools but this is not what I need. Logrotating requires lots of IO, happens usually once a day while I need a "runtime" solution.

  Read the article

• Access to SQL Server when administrator account deleted

  - by Shiraz Bhaiji

  An interesting situation here. We have a database server, used for testing only, where someone went in and deleted the administrator login. Since this is a test server the was no other admin level login on the server. Is there a way to get access to the server again without reinstalling SQL Server? We do not need the data in the databases, these are droped and recreated everytime the tests are run.

  Read the article

• Attempts at NIC teaming on Server 2008 R2 with PRO/1000 MT

  - by Klaus

  I have a Dell PowerEdge 1850 server and a gigabit switch that supports nic teaming (and was configured to do so). The server has a total of four Intel PRO/1000 MT ports, which also support teaming. But.. for some reason Intel does not actually have a version of the drivers/ProSet that will work for these cards on 2008 R2. You have to use the built-in drivers that come with 2008 R2, which do not support the additional features. According to their website, they have no plans to change this. Strangely enough, I experimented with various drivers in an attempt to force it to work. At one point, the teaming was working, but there were side effects (such as the DNS server refusing to start). So now I am back to running just one of the cards, (very) frustrated about the whole situation. I have looked all over to see if there is some way around this, but have not had any success. I know I can probably just get a new network adapter for it, but with the good deal I got, that would cost more than the server! :) While staying with 2008 R2, does anyone know of any possible alternatives? Thanks!

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >