Search Results

Search found 755 results on 31 pages for 'acer'.

Page 27/31 | < Previous Page | 23 24 25 26 27 28 29 30 31  | Next Page >

  • How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

    - by tnorthcutt
    I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

    Read the article

  • Updating GeForce 9200 driver on Vista (64-bit) yields installer failed

    - by weka
    OK, so I have a Windows Vista... more specifically this: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103182 a Acer Aspire AX3200-U3600A Desktop. I have DirectX 11 and I am trying to update my drivers... During the update of the latest one: GeForce 306.23 Driver my screen flashes a bit and goes black. This is standard when updating GRAPHIC DRIVERS. Then... my screen shifts 50 pixels or so to the left... OFFSCREEN. Not even Auto Image Adjust will fix the screen back... Then after that happens, I get this: Help, please? I just want to update my graphic drivers....

    Read the article

  • Reset disk does not work for different model of computer

    - by dato
    I've created a reset USB disk on my HP computer, with Windows 7 Ultimate 32-bit, and it works fine. However, it does not work for Acer computers (notebooks too), so what is the problem here? I've have created it for the same user named user, and the password is exactly the same as well. Is it possible to show the language bar with a keyboard shortcut at the logon screen in Windows 7? I know I can do it through Control Panel, but I can't log into the system. When I click Reset Passwword, it shows me my USB flash drive and says that the password hint is on this USB drive. Then I click Next and type the new passwword, then confirm this new password, but an error dialog is shown. It says that an error occured when trying to change the password for this user-

    Read the article

  • ElanTech touchpad both keys simultaneously don't work

    - by Wojciech
    I have a huge problem with ElanTech touchpad. Without the ElanTech driver both the keys can be used at the same time(R+L). This is usefull in games like Mafia2 (can't play without it). When I install their driver I get the gestures, scrolling etc. but I can't use both keys at the same time. It is a common problem. Acer Aspire v3-571G Windows 7 x64 This didn't work at all: Synaptics 15.3.41.5 Is there any universal driver which will give me at least scrolling and simultaneous keys usage?

    Read the article

  • Problem installing Ubuntu 14.04 into a laptop using Windows 8.1

    - by AlexanderFreud
    I have used Ubuntu on my LG laptop for several years. I lately bought an Acer Aspire V5 laptop which included Windows 8.1. I don't have any data on it; I would like to just remove it completely (that horrible Windows 8.1) and install Ubuntu. I tried using a USB device with Ubuntu 14.04 (64bit version) saved on it. I changed the BIOS configuration, putting USB device first on boot order, Windows Boot Manager last. When I try to run with USB device it doesn't work. Messages like these show up: System doesn't have any USB boot option. Please select other boot option in Boot Manager Menu. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. insert your windows installation disc and restart your computer 2. choose your language settings, and then click "next" 3. click "repair your computer" If you do not have this disk, contact your system administrator manufacturer for assistance File \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: the application or operating system couldn't be load...[?] required file is missing or contains errors. Could someone please write step-by-step procedures to install Ubuntu 14.04 after removing Windows 8.1 ? I already have done a second partition on the hard disk just in case.

    Read the article

  • Ubuntu is unresponsive and scrolling is very jerky

    - by peterpipe
    I'm new to Ubuntu. I've been using 12.04LTS for over a week now. For 3 days it was great but now I'm having a number of problems. I'm using an Acer Aspire one D255 it has a 250GB HDD and a 1GB Memory. My browser is Firefox. Pages freeze occasionally and I wait for over 10 minutes and have to use the computer's 'off' button. Pages crash. On facebook some pictures don't load and I have to close down and restart a couple of times. Scrolling can sometimes be very jerky. Downloading software has become a problem and I have a 'no entry' sign in the top taskbar. I've looked at this page for some help but the words used and the explanations are not helpful to someone like me who has little knowledge of this. Please - 'Ubuntu for dummies'. I'd like to continue using Ubuntu but am close to giving up.

    Read the article

  • In facebook pictures bdon't always load properly and scrolling is very jerky

    - by peterpipe
    I'm new to Ubuntu. I've been using 12.04LTS for over a week now. For 3 days it was great but now I'm having a number of problems. I'm using an Acer Aspire one D255 it has a 250GB HDD and a 1GB Memory. My browser is Firefox. Pages freeze occasionally and I wait for over 10 minutes and have to use the computer's 'off' button. Pages crash. On facebook some pictures don't load and I have to close down and restart a couple of times. Scrolling can sometimes be very jerky. Downloading software has become a problem and I have a 'no entry' sign in the top taskbar. I've looked at this page for some help but the words used and the explanations are not helpful to someone like me who has little knowledge of this. Please - 'Ubuntu for dummies'. I'd like to continue using Ubuntu but am close to giving up.

    Read the article

  • After tarball restore my PC (tar xvfpz backup.tgz -C /), my sound card and network are not working. How to detect?

    - by axton hunger
    1 . I have a old laptop I installed Ubuntu 12.04 on. (It was ACER) 2 . I booted into single user mode and backed it up via cd / sudo -i tar cvpzf backup.tgz --exclude=/proc --exclude=/dev --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys / 3 . I installed a fresh copy of Ubuntu 1204 on my new laptop (It is Dell) 4 . I boot into single user mode 5 . I backup the existing /boot directory 6 . I untar my backup to restore on to the Dell sudo tar xvfpz backup.tgz -C / 7 . I restore the previous /boot directory again 8 . I boot it up, and my profile and settings are loaded ok but, Ubuntu shows that there is no Sound Card.. I cannot use unity to drag and change volume. I noticed that the network card also doesnt work. ** How do you make ubuntu recognize changed hardware, if the hardware is already configured for a different laptop? Does anyone know?**

    Read the article

  • MonoDevelop: error VBNC99999

    - by teo
    Hi at all guys, hope someone is using Mono & monodevelop... i'm getting the following error when i try to compile an ASP.NET apps ported from vs.net 2008 Error VBNC99999: Unexpected error: The classes in the module cannot be loaded. (VBNC99999) This is the only error i get. I'm using 4 external assembly / dll AjaxControlToolkit.dll FusionCharts.dll MySql.Data.dll PostBackRitalin.dll I've added the dll in bin directory, then i've referenced it. I'm using Mono, because on my "old" computer (acer aspire t2300 buyed in 2007) run with linux & with monodevelop very well. With windows, visual studio is reeeeeeally slow.. so i decide to pass to mono.. Can somenone know something about that error ? Thank you very much. Regards !

    Read the article

  • ath9k driver does not weak up

    - by shantanu
    I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

    Read the article

  • Best Ati Radeon x1200 drivers for 12.10

    - by Jaclyn
    [Long story short is at the bottom if you don't care about my ranting] Ok, well, I have the unfortunate distinction of having an Acer Extensa 4420 (Yes, the model with the faulty motherboard, and no, I do not know how it is still working either). Long story short I need the best drivers for my Ati Radeon x1200 integrated graphics card. The Ati Propriatary drivers for 12.10 no longer supports my video card. Currently when I try to play Minecraft, or any game really, the framerate is quite terrible despite the fact that my handy dandy system load monitor says that I have plenty of memory and CPU power (Mind you, this is when I'm not playing minecraft; that kind of uses up all of my resources unless it's on the worst graphical settings, and even then I have terrible framerate, but plenty of resources left over). I tried the fglrx through a workaround guide, and it completely killed my display and I had to uninstall it. I'm considering just trying to install fglrx through synaptic, but I am hesitant to do so since I don't want a repeat of the BSBDD!!! (Black Screen of Bad Drivers 'o DOOOM!!!), so I will wait until after I get some input from you fine ladies and gentlemen on to what your advice it. ok, so I'm running xubuntu 12.10 64 bit. I upgraded from 10.10 to 11.04. Then about a month ago I went from natty to quantal via the update option in the package updater, and then I decided that I was sick of gnome so I installed xfce. I did not install new drivers from natty to when I wound up at 12.10, so that shouldn't have changed, and they were indeed quite terrible back then, but now I'm using xubuntu as my main os, so I actually need good drivers. uuuugh. Anyway, long story short: I need to know what are the best drivers available for my card, and how to install them, because I am a linux novice, and I have tried everything that I can think of, including search google. Small edit: I forgot to note that since I upgraded to 12.10, my VGA out does not work (I haven't had a chance to try the s-video yet), and possibly related, the USB port on that side of my laptop does not work anymore either.

    Read the article

  • E160 ubuntu 12.04 can't detect the modem

    - by Matt
    i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by torbengb
    Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

    Read the article

  • Atheros AR928X wireless connection makes neighbourhood machine drop off line

    - by funicorn
    I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

    Read the article

  • HDMI sound gone, can't figure out how to turn it back on

    - by Oli
    I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

    Read the article

  • Microsoft BUILD 2013&ndash;Day 1 Summary

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013ndashday-1-summary.aspx I’m happy to be at BUILD this week, mainly because my flights finally got me here late on Tuesday.  My biggest complaints so far are the flights and the hotel.  It seems that almost every flight into San Francisco were delayed multiple hours.  The Sequester so lovingly forced on America by congress means that the airport was short controllers.   That, along with poor weather and airport construction meant most people were 2-3 hours late arriving.  Add on top of that the fact that the hotel that I picked durring registration is absolutely horrid.  It looks like something out of a ghost hunters show and smells like it too.  I think if Microsoft is going to select a hotel they need to make sure that it is adequate. Rant over! So what happened the first day?  Steve Balmer started off the keynote along with Julie Larson-Green and a cast of others.  We finally found out that there were around six thousand people attending BUILD and that the focus this year would be Windows 8, Windows Phone 8 and Azure.  For the rest of the keynote I am going to have a separate post. You can’t have a Microsoft conference without some fun.  This year they have a hunt for pins that represent different gestures in Windows 8.  I got all of mine.  Now they just need to pull my name. The sessions I attended were really good. They covered live tiles, what’s new in XAML and building Windows Phone UIs presented by Kraig Brockschmidt, Tim Heuer and Shawn Oster respectively.  These will also be covered in separate posts. The exhibit area was interesting, but somewhat disappointing.  TechEd 2012 I think was better organized and better staffed by the vendors.  It also seemed that the Microsoft teams’ booths were also in need of some organization and staffing. Overall it was a really fun day capped off by all six thousand attendees standing in like to get their Acer 8” tables and Surface Pros.  What a day!  Stay tuned for follow up posts. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote

    Read the article

  • iwlwifi on lenovo z570 disabled by hardware switch

    - by Kevin Gallagher
    It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

    Read the article

  • Unity Dash and top toolbar won't open after updating to 12.10

    - by pgrytdal
    Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • A Windows Update Prevented Live Discs From Working? [migrated]

    - by user88311
    First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

    Read the article

  • SD Card reader not working on Sony Vaio

    - by TessellatingHeckler
    This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by BlueBill
    Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

    Read the article

  • kvm works only when kvm-intel is unloaded

    - by Sathya
    I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now coming to the issue - I dont get any errors while executing "sudo modprobe kvm-intel". So I presume my processor does indeed support hardware virtualization. I use virt-manager and create a VM on which I install ubuntu from an *.iso file. When I start the VM it says it is running. No signs of any trouble. I can see the domain list in "virsh list". But when I try to connect to the VM thru VNC, all I get to see is a blank screen (no cursor). There is no response to any key press. I changed the video mode etc. Tried all different combinations but none work. But strangely, if I shutdown the vm an virt-manager and then unload the module by doing "sudo modprove -r kvm-intel", everything works fine. ie., I can see the screen via VNC. I am able to install the OS and so on. So what does this mean ? IS hardware virtualization not supported ? How come there is no error anywhere ? dmesg | grep kvm doesnt report anything. Can someone throw light on what excatly is happening ?

    Read the article

  • Htpc aka "Media Center": cheap and *silent*?

    - by Unknown
    It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

    Read the article

  • Dual VGA monitors with Quadro FX 580?

    - by dentrasi
    I have a machine with a Quadro FX 580 card (DVI and two Displayport). Attached to it are two 19" Acer screens, which are both (annoyingly) VGA. The first one works perfectly, with a DVI-VGA adaptor. The second one doesn't work. It's got a VGA cable, which goes into a VGA-DVI converted, which then goes into a DVI-Displayport converter. Initally, I was getting 'Cable Unplugged' on the screen, and it couldn't be seen by Windows or the nVidia control panel. After swapping the VGA-DVI adaptor (which works perfectly on another machine), Windows can now see the monitor. The nVidia panel sees the model and native resolution, but I get a constant 'No Signal' error. Switching to the other Displayport makes no difference. I suspect that the card is seeing a DVI connection plugged into it (nVididaCP shows the monitor as having a DVI connection), and it only sending out a digital signal because of this. Does anyone know of a solution (other than trying to get a Displayport-VGA adaptor), or of a way to force the card to see it as VGA? Thanks, ~Dentrasi

    Read the article

  • LCD monitor flicker when connected to a laptop using VGA

    - by Björn Lindqvist
    I have a dual screen setup with two AOC e2450Sw monitors connected to a laptop. The laptop has one HDMI and one VGA output. When one of the monitors is connected using VGA, it flickers or displays static noise. The flickering is fairly subtle and only visible on darker colors. But it is there and noticable and appears like horizontal lines. The problem only appears on the monitor connected to the laptop using the VGA cable. If I swap the monitors, the one connected using VGA is displaying the flicker but not the one connected using HDMI. The simple solution would ofcourse be to connect both monitors using HDMI, but since the laptop only has one VGA and one HDMI out that isn't possible. I've tried tweaking the monitor setting using the OSD menu, but it had little or no effect. Update: After several more trouble shooting hours, it seems the problem is not related to the monitor or VGA cable as the problem persists even if I swap the display with another brand and different cables. So it may be the graphics card? Intel HD Graphics 4000. The laptop is Acer Aspire E1-571.

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31  | Next Page >