Search Results

Search found 10406 results on 417 pages for 'device'.

Page 274/417 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Weather Logging Software on Windows Home Server

  - by Cruiser

  I'm looking for some weather logging software that I can run as a Windows Home Server add-in, or as a service on my Home Server, so I don't need to log into my Home Server to log weather data. I have an Oregon Scientific WMR918 weather station, and an HP MediaSmart EX485 Windows Home Server. The two are currently connected through a serial bluetooth adapter, but that shouldn't matter as the computer sees it basically as a serial device. I'm currently using Cumulus to log data and upload to Weather Underground, but it is a regular windows application, so I need to remain logged into my Home Server by RDP in order to run the software (I disconnect, but don't log off so the session remains open). Ideally I would like something to run as a service or WHS add-in, so that it runs all the time without logging in, can log data from my WMR918, and can upload to Weather Underground. Thanks!

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• Convert video files for Maemo (Nokia N900) using ffmpeg/mencoder

  - by Vikrant Chaudhary

  I'm a newbie in video encoding so I'm looking for some expert advice. I'm looking to transcode media files with ffmpeg or mencoder (or something other) on Ubuntu for my Nokia N900 running Maemo. I'd prefer mencoder, because of ffmpeg's crazy dependencies. Video output should be AVC/H.264 (probably hardware accelerated on device). Audio output in AAC (should have preferred Vorbis but not supported natively and requires .mkv which is also not completely supported). Output video should retain the original aspect ratio. Resolution of screen is 800x480 (16:10). (Explanation of why-this-value-is-chosen would be really appreciated). Thanks.

  Read the article

• Thinkpad Bluetooth turns itself on upon restart/hibernate

  - by Traveling Tech Guy

  I have a T400 with Windows 7 64bit. About 3 weeks ago, the Lenovo update pushed a Bluetooth update that added a 2.1 driver and device experience. Since then, my bluetooth turns itself on whenever the OS comes up (full restarts as well as waking from hibernation). I can turn it of using the <Fn>+<F5> Radio menu, but it just turns itself on again the next time. If I forget to turn it off, it just eats my battery that much faster.I've been scouring the web and couldn't find similar occurrences. Is this a hardware issue, a BIOS issue (although no reference to BT in any of the BIOS menus), a driver issue or (shudder) a user issue? Thanks for your help.

  Read the article

• How do I make my Boot Camp partition bootable again?

  - by Dan Herbert

  I needed to resize my Boot Camp partition so I used Gparted to move and resize it. This seemed to work, except that now I can't boot into Windows. I can boot into OS X just fine. OS X can recognize the Boot Camp partition and view its contents. When I try to reboot into Windows, however I get the message: No bootable device -- insert boot disk and press any key The only solutions I've been able to find online suggest that the only way to fix this is to either clone the drive or remove the Windows partition and re-install it. Is there any way to fix my Windows partition so that I don't have to reinstall Windows again?

  Read the article

• NTFS Error - file system structure is corrupt and unusable

  - by SomeGuy

  My Windows 7 (64) keeps completely locking up, and I have to hold the power button to shit it down. Event logs are showing EventID 55. I realize that this can be a warning sign of an impending disk failure, but my data on this machine is safely backed up and I don't feel like taking the time to replace the drive right now. When I have seen this problem before, I have been able to delete the offending folder with a Linux Live CD. (When CHKDSK /F didn't work). In this case, the folder is from VSS. I assume this is from Crashplan, my online backup provider. What are the ramifications of deleting this folder from Linux? Is it safe to do? "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy26."

  Read the article

• Windows - Force Wi-Fi to N mode

  - by Frederick Marcoux

  I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

  Read the article

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• SCCM deploy from VMware XP image

  - by HannesFostie

  We recently set up the latest version of SCCM and I managed to capture a .wim image from a virtual machine (build and capture task sequence). I want to use this .wim file to deploy winXP to different hardware, and therefor need to add device drivers to the task sequence. I created a driver package per laptop type, and deployed for the first time. However, I am getting a BSOD (0x00007B) which leads me to believe theres a problem with the storage drivers. After adjusting the task sequence to try and point to the mass storage drivers (which are applied at F6, I suppose) I do not get a list of compatible drivers (the list is empty). I looked around, and found some issues regarding hdc class drivers that are not recognized as mass storage drivers. The workaround suggested changing the INF file to make the driver a SCSIAdapter class driver, and importing these again, but to no avail. The list remains empty. Any help is much appreciated

  Read the article

• Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

  - by Charles Long

  I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

  Read the article

• Internet access using Edimax BR-6204WG as NIC

  - by Mat Richardson

  My internet access at home is provided by Virgin Media via their superhub. I have a laptop with no NIC - however I do have a spare wireless router, the Edimax BR-6204WG, which I have been led to believe can be used to bridge wireless connections. Only problem is, I'm not sure how to go about doing this. The manual for the device is here:- http://www.edimax.co.uk/images/Image/manual/Wireless/BR-6204Wg/BR-6204Wg_Manual.pdf Basically, I want to be able to connect the Edimax wireless router to my laptop using ethernet cable and to use it to pick up the wireless connection from my Virgin superhub. I've managed to get so far in some ways, but then I'm stuck.

  Read the article

• b43 module loaded, but no interface showed up

  - by Eduardo Bezerra

  I'm using CentOS 6.3 x86_64 on a hardware with a BCM43224 chip for wi-fi. I installed the b43-fwcutter module and then run modprobe b43, with no error messages. However, no new network interface showed up, and the return of iwconfig is: lo no wireless extensions. eth0 no wireless extensions. lspci -nn | grep 43224 returns: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) and uname -a: Linux localhost.localdomain 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Any ideas of how to make the wireless device work?

  Read the article

• Windows 7 Bluetooth Configuration

  - by ahsteele

  I have Bluetooth installed in my laptop. The Bluetooth is enabled according to the status light. However, I do not see Bluetooth listed in device manager or have a control panel option for it. A scan for new hardware doesn't turn up Bluetooth. Nor are any devices listed with a Yellow Exclamation Point. I do have three USB Hubs Listed as "Generic USB Hub." There is no Bluetooth icon in the notification area and Bluetooth is not listed under Devices and Printers. What am I missing?

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• Cheapest server to run Windows 2008 R2?

  - by chopps

  Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

  Read the article

• How to tell which physical disks have bootable MBR?

  - by Jon

  The computer I am using right now has 6 physical disks attached. Using the BIOS's "select boot device" functionality I have discovered that I can boot off 3 of these disks into the exact same bootloader. This means that all of these disks have the bootable flag set on their MBR, even though I had been under the impression that only 2 of them are in fact bootable. My question is: is there an easy way to check which disks have a bootable MBR with a command line tool or some OS utility? I am aware of the DISKPART tool and its basic functionality, but I haven't found how to view the information I need. The OS is Windows 7 x64 Ultimate with SP1.

  Read the article

• How to identify cause of system lock on debian squeeze?

  - by David Sanders

  I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

  Read the article

• Proper upstart script for hamachi?

  - by ALQ

  I've been looking for a script to supervise hamachi and mostly got it to work except for the part that daemonizes hamachid. The following script works but is not perfect. I'm not familiar with upstart internals to debug this further. description "Hamachi VPN" author "Alexis Le-Quoc <[email protected]>" start on (net-device-up and local-filesystems and runlevel [2345]) stop on runlevel [016] respawn oom never env DAEMON=/opt/logmein-hamachi/bin/hamachid pre-start script [ -x "$DAEMON" ] end script # should really be: # expect daemon # exec $DAEMON exec $DAEMON debug > /dev/null

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• Stop Touchpad from disabling itself when I press any keys?

  - by ApprenticeHacker

  I have an acer E1-571 laptop, with an ELAN Smart Pad. Unfortunately the "Smart" pad is a bit too smart. It automatically disables itself while I am pressing any keys. This is useful when typing. However it does not allow me to play games that use the mouse for scrolling such as Counter Strike and GTA San Andreas as the touchpad gets disabled when I press any key. I tried to find an option or check-box of some kind that would disable this behavior in the ELAN Smart Device Driver's Properties and the Windows 7 Control Panel, but to no avail. Any ideas?

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• Can't find second partition on encrypted drive with two partitions

  - by Thomas Uhrig

  I have a drive with two partitions, a system partition (Windows 7) and a partition just for data. Both are encrypted with the same password. I didn't had any problems, but yesterday my laptop gets broken. Now, I'm trying to connect the drive via USB to a new laptop and read it. The problem is, that I only see the system partition, not the one with my data. When I click on "Select Device", I can see my drive as "Harddisk 1" with 300 gb. But I only see a single partition "Partition1" with 117 gb. I'm unable to find the second one. It's not a hidden partition. Any ideas? Thanks.

  Read the article

• How to find out if the screen is WLED or RGBLED on Dell Studio XPS 16?

  - by Abhijeet

  I just ordered the Dell Studio XPS 16 with i7 and 16" RGBLED screen. This upgrade from WLED LCD to RGBLED LCD charged me more $$. But now when I view the order online, it lists this part as "320-8335 Premium FHD WLED Display, Obsidian Black, 2.0 MP Webcam". When called Dell, the rep says this part is RGBLED screen and the "premium" is for RGBLED. I want to make sure they are shipping me the RGBLED screen and not the WLED. Is there any way to verify this after I receive (either from Device Manager or BIOS or somewhere in system settings)? Also, is there any published specifications / criteria that we can run (some third party software) on this monitor which can tell if this is WLED or RGBLED?

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >