Search Results

Search found 10406 results on 417 pages for 'device'.

Page 280/417 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

• How to Set "<options>" in fstab - Manual Mounting is Successfull

  - by nicorellius

  I am not real familiar with fstab yet, so I have a couple questions. When I use this command to mount devices: sudo mount -t cifs -o username=admin //192.168.1.134/share_name /mnt/share_name With passwords: sudo="local user password" password="password for device" How do I translate that into an fstab entry? So far, I have tried this in the fstab and mounting fails: //192.168.1.134/share_name /mnt/share_name cifs default 0 0 This is where the question comes in. Where I have default, should there be something instead, indicating username=admin, etc?

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Windows 8 not booting from DVD while trying to install in a Ubuntu 14.04 system

  - by Tom

  Currently my system runs on Ubuntu 14.04. Yesterday, I deleted and formatted the partition(C drive) as NTFS in which Windows 7 was installed because Windows 7 was not booting for more than a week. I have a Windows 8 disk and it was able to boot from that disk when there was Windows 7 on my system. After the formatting of C drive yesterday, I tried to install Windows 8 by booting from the disk. Unfortunately, this time no booting happened from the disk. So I pressed F2 during the system start up and checked Boot Device Priority, Optical Drive has the first priority there. So why Windows 8 didn't boot from the disk ? I need to install Windows 8 too in my system without doing any damage to Ubuntu 14.04. How can I do it ?

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• Open NetApp CIFS Share

  - by kingfish

  I have a CIFS share on a NetApp device. I want this share to be completely open to any user/computer on the same network. I don't want any authentication (domain, workgroup, etc) required; no login/password should need to be provided. Currently I have CIFS configured to use "Domain - Windows 2000" authentication and have the permissions on the share set to "Everyone - Full Read/Write" but if you try to connect to it from a machine that isn't bound to the domain it is asking for login info.

  Read the article

• Can I use the voice & SMS features of my GSM SIM through my laptop?

  - by i..

  My laptop (a Lenovo T410s) has an internal GSM modem (device manager calls it a Qualcomm Gobi 2000 HS-USB Modem 9205) that I'm currently using a regular (voice, data, text, etc) 3G SIM in. The data functionality works great through the Lenovo software & Windows 7 but I was wondering if I can use the other features (specifically voice & SMS) through Windows. Is it posisble to use the non-data features of my 3G SIM through my Qualcomm GSM modem? If so, what software is available to this end? If not, where is the restriction? (e.g. hardware, OS, driver, software) Thanks!

  Read the article

• Jumbo Frames, ISCSI and ESXi

  - by vlannoob

  I have enabled Jumbo Frames (9000) in ESXi for all my vmNICs, vmKernels, vSwitches, iSCSI Bindings etc - basically anywhere in ESXi where it has an MTU settings I have put 9000 in it. The ports on the switches (Dell PowerConnects) are all set for Jumbo Frames. I have a Dell MD3200i with 2 controllers, each with 4 ports for iSCSI. Each of these ports is set to Jumbo Frames (9000) as well. So now the questions: Do I need to log into each Windows Server VM I am running and delve into the NIC properties and manually set it to Jumbo Frames in the NIC properties in the device Manager as well? Whats the best way of testing that Jumbo Frames are indeed working as intended?

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Setting Linux UID on NFS volume from EMC NX4

  - by ethrbunny

  I have an EMC NX4 from which there are several CIFS shares with corresponding NFS mount points. The CIFS user ids seem fine but when viewed from Linux they are all 327xx numbers and can't be set from the file system. (IE CHOWN doesn't work - permission denied). On our other (older) EMC devices we used an MMC app to set the Linux UID for each user. I don't seem to have such an app on the 'Applications and Tools' CD for this new device. Is there some other method for setting these? Did I setup the system incorrectly?

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• How to create a filesystem mountable by windows in linux?

  - by wcoenen

  I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

  Read the article

• xen hotplug can't add vif to eth0: operation not supported

  - by John Tate

  I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Unable to use cloned VM, OpenSUSE, VirtualBox

  - by Kremchik

  I've cloned a VM and now while booting it I see a message: Trying manual resume from /dev/sda1 Invoking userspace resume from /dev/sda1 resume: libgcrypt version: 1.5.0 Trying manual resume from /dev/sda1 invoking in-kernel resume from /dev/sda1 Waiting for device /dev/disk/by-id/ata-VBOX_HARDDISK_.....-part2 to appear: ... Could not find /dev/disk/...-part2 Want me to fall back to /dev/disk/...-part2 (Y/n) If I press 'Y' it tries to boot again with failure, then exits to /bin/sh. If I press 'n' it exits to /bin/sh immediately. I've read a solution here: http://diggerpage.blogspot.com/2011/11/cannot-boot-opensuse-12-after-cloning.html but I don't understand how to access files on disk to edit /etc/fstab and /boot/grub/menu.lst?

  Read the article

• How to make XP install ubuntu from USB?

  - by Apoorv

  I want to install ubuntu on my PC which is running windows XP right now. I have made my pen drive bootable and have loaded Ubuntu on it. When I insert the pen drive at the time of booting of my PC, nothing happens and windows XP starts normally instead of asking me if I want to boot from my pen drive. Also when, I entered my BIOS setting to change the boot order there was no option of pen drive as a boot device. Please suggest me a way to install the OS using my already made bootable pen drive. And there's no problem with my pen drive cause I have tried it on my friends PC and it worked normally. Thanks in advance

  Read the article

• How to lie to Win98 about USB drivers?

  - by BCS

  I have a new printer and a old (Windows 98) system (that can't be upgraded). I've been told that some of the drivers for older printers of the same make are very likely to work just fine for it if I can talk windows into using them. Is there a way to edit the map of device IDs (VID/PID?) to USB drivers? The specific kind of tool I'm looking for should work for any kind of USB drivers, not just printers. OTOH if someone knows of a technique that work for some kinds of printers, that could be of (general) interest.

  Read the article

• centos 100% disk full - How to remove log files, history, etc?

  - by kopeklan

  mysqld won't start because disk space is full: 101221 14:06:50 [ERROR] /usr/libexec/mysqld: Error writing file '/var/run/mysqld/mysqld.pid' (Errcode: 28) 101221 14:06:50 [ERROR] Can't start server: can't create PID file: No space left on device running df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda2 16G 3.2G 12G 23% / /dev/sda5 4.8G 4.6G 0 100% /var /dev/sda3 430G 855M 407G 1% /home /dev/sda1 76M 24M 49M 33% /boot tmpfs 956M 0 956M 0% /dev/shm du -sh * in /var: 12K account 56M cache 24K db 32K empty 8.0K games 1.5G lib 8.0K local 32K lock 221M log 16K lost+found 0 mail 24K named 8.0K nis 8.0K opt 8.0K preserve 8.0K racoon 292K run 70M spool 8.0K tmp 76K webmin 2.6G www 20K yp in /dev/sda5, there is website files in /var/www. because this is first time, I have no idea which files to remove other than moving /var/www to other partition And one more, what is the right way to remove log files, history, etc in /dev/sda5?

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• HP laptop won't recognize wireless adapter

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. Is there some way, short of installing a new adapter, that I can work around this problem? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers. See this related question where I ask how to use an old Windows Mobile phone as a Wi-Fi (not cellular data) tether.

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• Ending a program on Windows Mobile 6 that refuses to die

  - by Brandon

  I have an application that was installed on a handheld device running Windows Mobile 6.0. The application basically connects to a remote server and sends scanned barcodes to it. The application shut down unexpectedly, and now it refuses to go away. I tried starting it up again and nothing happened. I went to the Running Programs, hit Stop All, and it ended everything but the application. It gives an error saying it's not responding, so I try to End Task, and it does nothing. I even uninstalled and reinstalled the application. Is there any way to kill this thing?

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >