Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 277/594 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Wireless Connection Troubles

  - by James

  I just recently switched from Windows 7 over to Ubuntu 12.04 and have been experiencing some issues connecting to my home's wireless network. The only way I can get it to connect to the network is by disabling IPv4 and IPv6 settings. Even then while it says its connected to the network (3 bars), I'm unable to access the Internet. It connected for a little while after I first installed Ubuntu, but after the first reboot I haven't been able to access the web at all. I have very basic knowledge when it comes to computers and barely any when dealing with Ubuntu and Linux. I'm very happy with Ubuntu apart from this one issue, as before my computer was overheating and crashing, I've yet to experience any of those problems since installing Ubuntu. The information I can give may be very limited since I'm having to use my cell phone to figure out the solution to this. Any help would be greatly appreciated. Thanks in advance!

  Read the article

• My Generation Drivers DropdownList Empty

  - by hmloo

  I just installed MyGeneration 1.3.1 on my Windows Vista, and when I try to setup the default settings there are no drivers to select from. but it's OK in my Windows XP machine. At last I got the answers from search engine, it is caused by multi .Net Frameworks coexist and MyMeta.dll is registered by the .Net v2.0 while it should be registered with the .Net v4.0. So we have to manually register the dll. Please follow these steps: 1. Run Visual Studio Command Prompt (2010) with "Run as Administrator". 2. Enter the command "regasm.exe "C:\Program Files\MyGeneration13\MyMeta.dll" /tlb: MyMeta.tlb" 3. Exit Command Prompt when successfully registered. 4. Run MyGeneration and the proplem should be disapear. Hope this helps. Thanks for reading.

  Read the article

• 'Invalid or corrupt kernel image' error while booting from USB stick

  - by steve

  I got the Ubuntu 11.10 32-bit edition and i used Unetbootin to write the ISO to a usb stick.After that i tried to boot from the stick,having changed the BIOS boot settings,and when the first interface shows up with the choices of istallation,whatever choice i select i got the message"invalid or corrupt kernel image".I use a netbook with windows 7 on it.I tried different usb sticks but same again.I also tried Universal USB installer instead of Unetbootin but same again.Any idea of what happens?I am using ASUS 1000H.The USB doesn't work in one more PC i tried to,but i also tried a second USB to both of the two computers and same again. I downloaded the ISO image once again and follow the same procedure but same again

  Read the article

• Framework Folders and Duplicate File Names

  - by Kevin Smith

  I have been working with Framework folders a little bit in the past few days and found one unexpected behavior that is different from Contribution Folders (Folders_g). If you try and check a file into a Framework Folder that already exists in the folder it will allow it and rename the file for you. In Folders_g this would have generated an error and prevented you from checking in the file. A quick check of the Framework Folder configuration settings in the Application Administrator’s Guide for Content Server does not show a configuration parameter to control this. I'm still thinking about this and not sure if I like this new behavior or not. I guess from a user perspective this more closely aligns Framework Folders to how Windows handle duplicate file names, but if you are migrating from Folders_g and expect a duplicate file name to be rejected, this might cause you some problems.

  Read the article

• how can i get rotation vector from matrix4x4 in xna?

  - by mr.Smyle

  i want to get rotation vector from matrix to realize some parent-children system for models. Matrix bonePos = link.Bone.Transform * World; Matrix m = Matrix.CreateTranslation(link.Offset) * Matrix.CreateScale(link.gameObj.Scale.X, link.gameObj.Scale.Y, link.gameObj.Scale.Z) * Matrix.CreateFromYawPitchRoll(MathHelper.ToRadians(link.gameObj.Rotation.Y), MathHelper.ToRadians(link.gameObj.Rotation.X), MathHelper.ToRadians(link.gameObj.Rotation.Z)) //need rotation vector from bone matrix here (now it's global model rotation vector) * Matrix.CreateFromYawPitchRoll(MathHelper.ToRadians(Rotation.Y), MathHelper.ToRadians(Rotation.X), MathHelper.ToRadians(Rotation.Z)) * Matrix.CreateTranslation(bonePos.Translation); link.gameObj.World = m; where : link - struct with children model settings, like position, rotation etc. And link.Bone - Parent Bone

  Read the article

• How to control fan speed and temperatures on Asus A8Js laptop running Ubuntu Server?

  - by Azeworai

  Hi, I have tried installing asusfan and lm-sensors but I'm unable to control my fans to cool my laptop down sufficiently. Currently it overheats at about 100 degrees celsius and my sensors output somehow does not have any fan information on it: jackson@OLYMPIA:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +69.0°C (crit = +110.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +66.0°C (high = +100.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +66.0°C (high = +100.0°C, crit = +100.0°C) I have checked my bios and there isn't any fan settings there. I can consistently overheat just by converting a video via Handbrake. I have ubuntu-desktop installed for a GUI. Is there a way for me to control my fans to start spinning before it reaches a critical temperature and kills itself?

  Read the article

• Depth is disabled - How to turn on?

  - by marc wellman

  In XNA 3.1 is there any other way to disable depth in 3D Worlds using DirectX models other than GraphicsDevice.RenderState.DepthBufferEnable = false; ? The reason for my question is I have quite a huge program which offers a 3D World with a couple of 3D DirectX models inside. Depth was never an issue since it ever worked fine but since a few days after doing some modifications my models are all depth-translucent i.e. depth-buffering and/or culling seems to be disabled. But in my whole source code I never touch any of the options related to Depth or Culling which means I never turn these settings on explicitly nor turn it off somewhere. So I am searching for some other statement maybe related to the GraphicsDevice that implicitly turns depth off - but I can't find it. (Sorry that I don't post any source code but I have too much source code and I simply don't know where to search) UPDATE: These are a couple of simple objects seen with correct depth. These are the same objects in their current state.

  Read the article

• Applications Menu disappeared [closed]

  - by Sophie Sperner

  Possible Duplicate: Applications Menu disappeared I'm using Ubuntu 12.04, classic desktop without effects. Once the indicator-applet-complete (right part of the top panel) had disappeared. I found how to fix it: Alt-Win-RightMouseClick on the panel, then "Add to the Panel", where choose "Indicator Applet Complete" to add. Now, the left part of the top panel (Applications Menu) has disappeared! If I do Alt-Win-RightMouseClick on the panel, I can add only individual Menu sections like Internet, Office, Settings etc. But how to get back the full Menu as it ought to be?

  Read the article

• Changing DisplayMode seems not to update Input&Graphic Dimension

  - by coding.mof

  I'm writing a small game using Slick and Nifty-GUI. At the program startup I set the DisplayMode using the following lines: AppGameContainer app = new ... app.setDisplayMode( 800, 600, false ); app.start(); I wrote a Nifty-ScreenController for my settings dialog in which the user can select the desired DisplayMode. When I try to set the new DisplayMode within this controller class the game window gets resized correctly but the Graphics and Input objects aren't updated accordingly. Therefore my rendering code just uses a part of the new window. I tried to set different DisplayModes in the main method to test if it's generally possible to invoke this method multiple times. It seems that changing the DisplayMode only works before I call app.start(). Furthermore I tried to update the Graphics & Input object manually but the init and setDimensions methods are package private. :( Does someone know what I'm doing wrong and how to change the DisplayMode correctly?

  Read the article

• Bad anti-aliasing in some applications

  - by Matty

  There was an update a few weeks ago that seemed to mess with anti-aliasing in some applications. Firefox, Thunderbird, and the text in some apps such as Mousepad and Leafpad (but not the rest of the window) are affected, whereas Chrome and everything else seems to be just fine. Attached are two screenshots showing the difference between rendering in Firefox and Chrome. The anti-aliasing settings are the same as they've always been, which have worked just fine - full hinting, RGB sub-pixel order. I'm really not sure what's going on and am thinking that it might be faster to fix this problem by re-installing, but is there anything I can try first as re-installing is the last thing I want to do? I'm running Xubuntu 12.04.

  Read the article

• External display suddenly not detected

  - by NChase

  I have a Lenovo IdeaPad U410 running Ubuntu Desktop 13.04. I have an external monitor that I connect to via HDMI, and it's worked flawlessly for six months. I plug in my laptop, it detects the display. The "change display" key built into the laptop works for switching between the two screens. Never any problems. This afternoon, when I reconnected my computer after taking it into another room for a bit, it didn't work. When I open up Display settings, it can't detect the display. I tried disconnecting/reconnecting everything multiple times. And most strangely, that same "change display" key now behaves like a Super key, opening the dash instead of toggling the display. Nothing at all changed between when I plugged it in this morning and when it stopped working a few hours later. I tried xrandr, that doesn't detect it either. Anyone have any ideas?

  Read the article

• Both Webmin & ISPConfig won't work on my Ubuntu Linode

  - by SERVE-U

  I followed the steps on this page to download and setup Webmin on my Linode Ubuntu server, however, when I try to visit https + my.ip.add.ress + :10000, the page just hangs and nothing loads. I already looked into my firewall settings. I uninstalled Webmin and installed ISPConfig and all its dependencies, and the same thing happens at https + my.ip.add.ress + :8080. This is my first time managing a server so there could be something I overlooked. But my server is a pretty vanilla Ubuntu 12.10 with LAMP stack installed exactly as per the instructions in Linode's documentation.

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• Connecting Ubuntu 11.10 to Samsung LSCD TV over HDMI TV, gives screen in green and lila

  - by Gorog Imre

  I have a Dell 5720 laptop with ubuntu 11.10. I can't connect to my Samsung LCD TV (over Marantz nr 1601 AV). Audio is ok but the pictures are displayed in two colours: green and lila ! Please send me a massage how can I fix this problem ! Thanks a lot. I am very confused because I do not do anything however it comes(seldom) to the right colouring but only for a while(5minutes) and returns to the green-lila picture again when I do something else for example surfing with firefox or starting other programs ! The settings : resolutions of laptopscreenplay and TV are the same and I did not change the colour profile as well . My laptop screen is HD+ truebright (1600x900) and my TV SAmsung 1280x720 I have no idea what to do my HDMI connection to make right with the colours! How can I fix this situation to gain a stable colouring ?

  Read the article

• Shortcut to change Launcher 'Hide' setting

  - by joris

  When I'm working on my laptop I have periods that I am only using a couple of programs, so the default intellihide setting of the Launcher ('Dodge windows') is very handy. But I also have periods that I have to switch very often between programs, and then I find it very useful (and better for my workflow) that the Launcher doesn't hide. Now, every time I wan't to switch I have to open CCSM and change the setting (Unity plugin - Hide Launcher), but it would be easier if I could use a shortcut for it. So my question: Is there a way to create a shortcut to switch between (or change) the two settings of Compiz? I thought of command line interface to compiz, but I couldn't directly find something like that.

  Read the article

• Sharing samba-folder with root access

  - by Industrial

  Hi everyone, I have a staging server in my network running Ubuntu server 10.10, being my main development area. As I need to access the files in the Apache root from other computers in the network, I have setup samba with the following settings: [www] comment = Apache root www path = /var/www writable = yes force user = root force group = root On the host computer, running Ubuntu 10.10 desktop, I am trying to mount the drive with a bash file looking like below: #!/bin/bash sudo mount -t cifs //192.168.1.5/www /media/www/ -o username=myusername,password=mypassword,rw,iocharset=utf8,file_mode=0777,dir_mode=0777 What happens is that I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) thrown in my face whilst trying to execute the mount. I've done exactly the same, with exactly the same smb.conf & mount-bash file on another computer in my network, but this just wont work. What am I doing wrong? I am running out of ideas.

  Read the article

• General solution to solve different sports results in different languages

  - by sq2

  I currently have some code that checks if squash and tennis scores are valid, both in javascript and PHP. This results in 4 blocks of code existing, 2 languages * 2 sports, which does not scale well should any extra sports come around, or extra languages... How can one describe the valid scores of games via a settings/text file, so that each language can parse them and apply these rules. I'm stumped with the strange tie break situations in tennis should it reach 6-6 in a set, and also infinite play off in the final set should it reach 2 sets all. ie: tennis = { "format": [ { "name": "sets" "min": 3, "max": 5, "winby": 1 }, { "name": "games" "min": 6, "max": 7, "winby": 2 } ] } squash = { "format": [ { "name": "games" "min": 3, "max": 5, "winby": 1 }, { "name": "points" "min": 15, "max": 0, "winby": 2 } ] }

  Read the article

• Empathy 3.6.0 requires reauthorisation to Windows Live on every reboot

  - by Allu2

  I've been testing Ubuntu 12.10 beta2 and the only problem I've faced has been that with Windows Live Messenger(a.k.a MSN) After I have added Windows Live in the online-accounts in system settings, empathy works fine and connects to Windows Live Messenger with no problems until I reboot my system. After rebooting and logging in, when empathy connects to services it shows me message "Windows Live account requires authorisation" next to it is a button that takes me back to online-accounts where i can see the authorized Windows Live. So far the only way to get MSN work again has been to remove the Windows Live authorisation and add it again, which makes it work till the next time i close my computer. How could i make empathy to remember the authorisation to Windows Live

  Read the article

• mic on cam don't work

  - by ezz9

  the cam works. I pull up PulseAudio I can see it pick me up for 1sec then stops. don't work on Skype I've tried every USB port same thing it worked on 10.04 fine. but now I'm on 12.04 and it don't work. it is a logitech B500 desktop:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:0807 Logitech, Inc. Webcam B500 Bus 003 Device 002: ID 03f0:6104 Hewlett-Packard DeskJet 5650c Bus 005 Device 002: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks I have changed some setting in flash Player Settings Manager, I don't think it would affect it after all the cam is still working it's the microphone that freezes up, but thought I would tell you this, info is good.

  Read the article

• Keyboard layout issues using Ubuntu 12.04 in ssh via X11 for mac

  - by LostInTranslation

  I just upgraded from 10.04 LTS to 12.04 LTS on my server (DELL Intel XEON). By SSH login from my mac (OS X Lion) everything is fine (no issues with command lines) but when I open a window through X11, the keyboard layout is now completely messed up. As an owner of a french mac keyboard, I got used to such issues and could deal by guessing the "QUERTY" keys, but this time it's worse. To fix it, I tried: 1/ sudo dpkg-reconfigure keyboard-configuration = no effect 2/ sudo gnome-control-center then change the keyboard settings, however adding a couple of keyboard layouts did not change anything. I feel there is something to do with the X11 forwarding. Any hints? Thanks

  Read the article

• ethernet doesn't work

  - by Grig Tanasescu

  I know that it may look pretty stupid, but that's it. I have a ethernet connection with my mom's computer, and is her's who's the source or anyway it is called. I'm new at linux, but i had before linux mint 13 and the ethernet didn't work 'till a friend went to network settings-options he clicked "add" somewhere and and introduced some numbers, after he looked somewhere in my mom's computer. I've tried neither linux nor ethernet until now. Please help and sorry for my english. P.S. I'm just 13 and I don't know much about computers so, please, talk to me as you would with a completely idiot. Thanks

  Read the article

• All video thumbnails fail to be generated

  - by Forage

  Not a single video thumbnail is being generated and shown in Nautilus. The folder ~/.cache/thumbnails/fail/gnome-thumbnail-factory/ keeps getting filled for all of them. I tried removing all the thumbnails from the folder, reinstalling the gstreamer-plugins-... and totem packages, changing the thumbnail settings (Always, 4 GB) in the Preview section of the Nautilus preferences. All to no avail. Some recommend to install packages like libxine1 and ffmpegthumbnailer but this didn't not solve it either. There used to be an .xsession-errors error log file generated in the home folder in previous version of Ubuntu but that doesn't seem to be the case any more. I'm running Ubuntu 12.10 GNOME remix (x64) with the GNOME3 ppa packages installed. What could be the cause of the problem and how can I fix it?

  Read the article

• How to disable automatic login?

  - by iammilind

  I was playing around with "User accounts" and somehow set automatic login. Now, when I start my PC, it just has one button named as "login". Clicking that button, directly logs me in to my PC. There is no music or no asking for password while logging in. As a side effect, it asks me separately for keyring password How to disable auto login and make login/keyring password unified again like before? NOTE: Attempting to disable Automatic Login from System Settings User Accounts does not work. This is the content of my /etc/lightdm/lightdm.conf (where I have commented the autologin for my username mgandhi): [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu #autologin-user=mgandhi

  Read the article

• Network setup not working. Can't connect to the Internet in Ubuntu

  - by Clint Eastwood

  I want to know how to set-up network in 12.04 using automatic settings (DHCP). I installed Ubuntu, but I can't seen to see the network connection. What can I do? My notebook has no wireless only cable. The cable will not fit in. How can I plug it in? Do I need a special Cable? There is no router can I fix this myself, or should I call a technician? Also can I use USB to connect to the network/Internet? please can you help Thank you jamel

  Read the article

• Skype no sound on Kubuntu 13.10

  - by Michael Aquilina

  I just performed a fresh install of Kubuntu 13.10 on my machine. Everything is working great except for Skype. I cannot get any form of audio playback in Skype. In the sound settings panel I get a bunch of different sound sources, none of which work! At the moment I have set it to "sysdefault (unknown)" I installed it using the deb package found on the official website. My phonon backend is using phonon-gstreamer. When running skype from the terminal I get the following error messages: ALSA lib control.c:953:(snd_ctl_open_noupdate) Invalid CTL plughw:CARD=PCH ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Is this a known problem or has anyone experienced the problem and managed to solve it?

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >