Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 285/444 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• RRAS VPN Server on Windows 2008 Behind NAT

  - by Chris

  Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

  Read the article

• How to configure wpa_supplicant on RHEL6?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop. I uninstalled the default NetworkManager in order that I could configure the network all in the command line. The Ethernet part is okay, but I have problem bringing up the wireless interface. What I got is: Bringing up interface wlan0: Determining IP information for wlan0... failed; no link present. Check cable? I did exactly what this article says. I am not sure if it is because the article is obsolete or something else. Please help.

  Read the article

• Do i need a dedicated server for load balancing?

  - by Ben

  I'm completely new to the concept of load balancing so i hope this question isn't a "stupid question" because i've been searching around and im having a hard time understanding this. So to my understanding, in order to load balance, i need a separate machine with an ip address i can direct all traffic to. I initially thought i needed to rent 3 dedicated servers, one for load balancing and the other two as backend servers. Would a dedicated server be too much for a load balancer or do hosting companies have special types of computers for that process? Then i read somewhere else that i can install a load balance software in both of the two servers and configure it in a way that doesn't require me to rent another machine/dedicated server for load balancing. So im a bit confuse on how to actually implement a load balancer and whether or not i need a dedicated server for the sole purpose of acting as a load balancing machine. Also, i was recommended to use HAproxy so i'll be heading that direction for load balancing.

  Read the article

• Question regarding the SELinux type enforcement file

  - by Luke Bibby

  In my SElinux te file, I define two new types called voice_t and data_t which certain directories will be classified in the fc file (/data/ will be of type data_t and /voice/ will be of type voice_t). I would like the one SELinux policy to be used for all servers in my network, but, some servers will log VoIP data and other servers will be used to log IP data. I only want the voice_t type to be defined on some servers and data_t to be defined on the others - is this possible? I have tried using an if statement with a boolean expression, and then defining the type when the condition is true but this does not seem to work (it tells me there is a syntax error at 'type data_t'' or 'type voice_t;'). Example: if (data_logger) { type data_t; } else { type voice_t; } Any help would be greatly appreciated. Cheers, Luke

  Read the article

• setting domains

  - by allenskd

  I'm setting a local webserver to do a lot of web development work from now on. I'm not really knowledgeable in hosting configuration. Thing is I just added mydomain.com in /etc/hosts that's fine but what's the next step? TI need to use the wildcard on *.mydomain.com, so I'm figuring I need to add my zone in bind, is this correct? so I can make use of virtual hosts in apache and in play-framework Everything will be local, but once in a while I want to make public of my webserver to certain people using the no-ip service, in windows I've done it, in linux I don't know if it's any difference. The question is pretty much if I'm configuring it right or not? If this sounds confusing let me know, I'll try to detail it more

  Read the article

• AWS Large Instance: /mnt does not show all the space that should be available

  - by Emile Baizel

  I just created a Large (m1.large) 64 bit instance which comes with 850 GB instance storage. Look at the Large Instance http://aws.amazon.com/ec2/instance-types/ A 'df -h' from the root folder gives me the output below. The /mnt is where I'm thinking the instance storage is but here it is only showing me 414G. I have set up two servers and both are showing the same numbers. root@ip-11-11-11-11:/# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 1.1G 6.5G 14% / none 3.7G 112K 3.7G 1% /dev none 3.7G 0 3.7G 0% /dev/shm none 3.7G 48K 3.7G 1% /var/run none 3.7G 0 3.7G 0% /var/lock /dev/sdb 414G 199M 393G 1% /mnt

  Read the article

• Wireless and Wired Network Access at same time?

  - by grasper

  At work, I use a laptop. It is a Dell Latitude D630 with Windows XP. I work in a lab environment where I need to use the Ethernet Port as a Static IP to interact with a local network (which cannot talk to the outside world). What I would like to do is use the Wireless as the internet connection so i can check email, etc at the same time I am using the ethernet network... It seems like this is not possible. Is there a piece of software or a way to configure it to allow me to do this?

  Read the article

• Dual Nic, one keeps dropping

  - by user1215018

  I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

  Read the article

• Transition domain to new web host without waiting for DNS propagation

  - by jcmoney

  I was considering switching to Amazon EC2 to host my website to handle more traffic. It seems like I would have to update DNS records to point to the new server but I was wondering if there was a way to avoid having to wait for the new DNS record to propagate. Putting the code on both hosts would not work for me since the app writes to a database pretty frequently. I thought about just using a meta redirect or php redirect on the old host to redirect to the new host ip but was wondering if there's a better more accepted way of doing this.

  Read the article

• Intermittent Connection Issues to SQL Server 2008 R2 RTM

  - by Chandan Jha

  The problem I am facing is a very complex one and inspite of trying to gather a root cause of the problem, I am standing at the same place after 2 months with just bits and pieces of information.Here is a scenario: There is a windows 2003 server which uses an system DSN ODBC connection. I looked into the driver properties and it is as follows: Name Version File SQL Server 2000.86.3959.00 SQLSRV32.DLL Now, this system DSN has been given configured with TCP\IP in Network Libraries and 'determine port dynamically' is checked. Now, lets come to the database destination. It is hosted on Windows 2008 having SQL 2008 R2 RTM version 64-bit. Now, I will give you a an overview about the events that happen and whatever troubleshooting I could perform: I get an email saying 'blah blah' failed and the only message their application gets is 'cannot connect to database' I go the SQL Server logs and find the following information: Login failed for user ''. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. [CLIENT: 10.0.0.xx Error: 18456, Severity: 14, State: 58.] A quick search shows that this error may come when an SQL Server is configured with windows authentication but its not true. We have mixed mode and connection issue is intermittent. This SQL Server is configured to run on a local system account but since we use only SQL Server accounts to connect to this, there should not be any Kerberos errors. When I run a profiler trace and see only 'existing connections', i see a lot of them coming from my client server displaying the sql user but NO hostname is shown. Textdata field shows TCP\IP information along with some arithabort and ansi-null settings. Now, I tried looking into ring connectivity buffer by using following: SELECTCAST(record AS XML) FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = 'RING_BUFFER_CONNECTIVITY' One sample output is: <ConnectivityTraceRecord> <RecordType>Error</RecordType> <RecordSource>Tds</RecordSource> <Spid>118</Spid> <SniConnectionId>5124905D-D1EC-460E-AD78-201050B78C67</SniConnectionId> <OSError>0</OSError> <SniConsumerError>18452</SniConsumerError> <SniProvider>7</SniProvider> <State>1</State> <RemoteHost>10.0.0.21</RemoteHost> <RemotePort>5008</RemotePort> <LocalHost>10.1.0.38</LocalHost> <LocalPort>1433</LocalPort> <RecordTime>6/6/2012 21:14:57.527</RecordTime> <TdsBuffersInformation> <TdsInputBufferError>0</TdsInputBufferError> <TdsOutputBufferError>0</TdsOutputBufferError> <TdsInputBufferBytes>120</TdsInputBufferBytes> </TdsBuffersInformation> <TdsDisconnectFlags> <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled> <DisconnectDueToReadError>0</DisconnectDueToReadError> <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream> <ErrorFoundBeforeLogin>0</ErrorFoundBeforeLogin> <SessionIsKilled>0</SessionIsKilled> <NormalDisconnect>0</NormalDisconnect> </TdsDisconnectFlags> </ConnectivityTraceRecord> <Stack> <frame id="0">0X000000000174C34B</frame> <frame id="1">0X0000000001748FDD</frame> <frame id="2">0X0000000002461001</frame> <frame id="3">0X0000000000C47E98</frame> <frame id="4">0X00000000008015AD</frame> <frame id="5">0X0000000000801492</frame> <frame id="6">0X00000000003CBBD8</frame> <frame id="7">0X00000000003CB8BA</frame> <frame id="8">0X00000000003CB6FF</frame> <frame id="9">0X00000000008E8FB6</frame> <frame id="10">0X00000000008E9175</frame> <frame id="11">0X00000000008E9839</frame> <frame id="12">0X00000000008E9502</frame> <frame id="13">0X0000000074E437D7</frame> <frame id="14">0X0000000074E43894</frame> <frame id="15">0X00000000775A652D</frame> Somehow all the errors show error number 18452 whereas I never found this error in my SQL logs where I see only 18456. I am just stuck on a dead end because this connection issue appears intermittently. Sorry for a long question but I hope if you read this, you can make out that I tried a lot at my end before giving up.

  Read the article

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• does ping command to a dns name uses DNS PTR type messages?

  - by TiagoM

  Okay I cant understand this, when I try to ping to a machine on my network using the name associated I get a response from that machine, thats normal.. But there are messages that the sender sends to the top machine (SOA) that I dont understand.. First he sends a type A and gets a response with the IP associated to the name used on the ping command, but after that.. the sender only sends (before each ping) messages of type PTR to the (SOA) Saying this: Standar query 0xf66c PTR 12.45.168.192.in-addr.arpa and SOA respond with: Standard query response 0xf66c No such name And before each ping they do this, I dont know why... I notice this using wireshark, thanks alot again for accept me here, being able to get some answer :)

  Read the article

• Setting a custom timeout to nmblookup

  - by C2H5OH

  As part of a batch script, I have the following command: hostname=$(nmblookup -A $ip_address | awk '$2 == "<20>" {print $1}') Which works fine from a functinality perspective, even for unresolved hosts. The problem is that when the IP address is not reachable or the remote machine does not respond to the SMB request, the command takes about ten seconds to complete. Therefore, the question is simple: is there a way to lower the elapsed time in such cases? Or, in other words, is there a way to set a custom timeout for the nmblookup command? NOTE: I'm interested in solutions that do not make use of SIGALRM or similar mechanisms; if they exist. The nmblookup version is 3.6.3 from Ubuntu 12.04 LTS.

  Read the article

• nTop RRD file architecture

  - by Seanny123

  I have a gig of nTop RRD files and I would like to start graphing them with rrdtool (but not with nTop, since I'm hoping to do this with a separate backup of the database as workaround to the impossibility of limiting the RRD files by size), but I don't know how the files are structured. I've tried reading the RRD documentation from SourceForge and the nTop FAQ, but I'm not finding the information I need. Does anyone know of any documentation I should be looking at or how the files are structured? Here https://dl.dropbox.com/u/669437/file%20structure.png is a screenshot of the file structure. At first I thought it was organized by IP address (so the rrd files for address 1.1.2.3 would be stored in folder 1-1-2-3 or even the reverse order), but that doesn't seem to be the case. It isn't organized by MAC address either, although some hosts are saved that way. Any help would be appreciated.

  Read the article

• Hyper-V server 2012 nic teaming setup and virtual switch configuration

  - by Calvin

  I have a server with 2 nics. I installed Hyper-v 2012 server (not windows server 2012, no gui) I am trying to set up load balancing. I have both nics in the same switch currently in trunk mode and no native vlan. I use the new-netlbfoteam command to create a team with both nics, I can then "set-netlbfoteamnic "Nic Team" -vlanid 4" so that its available to me with a DHCP or static address but as soon as I try to create a virtual switch it becomes unresponsive. My guess is that is due to it removing the vlan tagging I setup. if I add-netlbfoteamnic and set it for vlan 4, then set the IP I can ping it from my management computer but I just get an error "an error occurred while attempting to connect to server "xxxxxx" Check that the Virtual Machine Management service is running and that you are authorized to connect to the server."

  Read the article

• Using the Juniper EX3300 Switch as a router?

  - by Richard Whitman

  I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the same VLAN as ge-0/1/0 can access the Internet. I have done some research, and I haven't gotten anywhere really. I have configured the interface as follows: ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family inet { address xx.xx.xx.xx/32; } } } where xx.xx.xx.xx is the "Customer Router Port IP" assigned by my ISP. When I try to commit, I get the following error: Interface ge-0/1/0.0 not enabled for switching Can some one tell me what is the right way to configure it?

  Read the article

• Cisco 877 as a VPN server?

  - by Massimo

  I have a Cisco 877 router which connects my network to the Internet using an ADSL line, a single public IP address and NAT; the IOS version is 15. Everything is working ok, but I'd like to configure this router to be a VPN server, to be able to connect to the network from the outside. I've tried looking for documentation, but everything I can find is related to having the 877 act as a VPN client, or to site-to-site VPNs; I can't find anything about letting single remote computers access the internal network, which is something I can do quite easily using Windows' RRAS or ISA Server. Can the Cisco 877 act as a VPN server for remote client computers? (Looks like it should, but just to be sure...) Which type of VPNs does it support? Do they require some special software on the client machines, or can they be used by standard out-of-the-box Windows computers? And, finally: how to set up this?

  Read the article

• Ping, firewall or DNS problem on Win Server 2008 R2

  - by Fred Kaiser

  Hi there, I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it. Cheers, Fred Kaiser

  Read the article

• Using Ubuntu Karmic as an L2TP Client for VPN

  - by James Lawrie

  I'm trying to connect to a VPN service over L2TP using Karmic as a client and it's not working. The only details I have are the remote IP address, username & password, and a shared secret string; this is enough for Windows but doesn't appear to be enough for Ubuntu. I've tried using network-manager-vpnc and vpnc from the terminal to connect and I get "no supported authentication", and trying with OpenSwan it says "unable to identify either side of the connection". I'd really appreciate some help here if anyone else has implemented this successfully.

  Read the article

• OpenVPN make redirect-gateway optional

  - by Tuinslak

  Hi there, I'm currently running an OpenVPN server for multiple clients. All traffic is directed through the VPN (it's set up as gateway; push "redirect-gateway def1"). So far, all is working fine. However, I'd like to connect a couple of servers to this virtual private network, without these servers using the OVPN daemon as gateway. These servers have to be accessible from both their WAN as well as their LAN IP address. Certain services will be accessible only from the LAN side. Is there any way, for a client, to ignore the push redirect-gateway option? Kind regards, Tuinslak

  Read the article

• Centos Virtual host loading default page

  - by ntechi

  I have asked a question which was related to this but not same, I have a centos VPS, which has two wordpress websites, one is mbas.co.in and another is onlinemba123.com, now for virtual hosting using just ONE IP ADDRESS, first I started mbas.co.in, which is working fine, when I added onlinemba123.com then, it is loading default Centos page instead of my website, and I am just testing my onlinemba123 website, I haven't configured DNS for it, I am testing it through editing my PC's hosts file, My website folder names are also same as in the conf file below Now my question is how can I load my website instead of Default page, is my virtual host config fine? My virtual host config: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.mbas.co.in ServerName mbas.co.in ErrorLog logs/mbas.co.in-error_log CustomLog logs/mbas.co.in-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.onlinemba123.com ServerName www.onlinemba123.com ErrorLog logs/onlinemba123-error_log CustomLog logs/onlinemba123-access_log common </VirtualHost> My computers host file is: xx.xxx.xxx.xxx www.onlinemba123.com

  Read the article

• Yahoo flagging mail as spam when using relay server

  - by modulaaron

  I'm using Postfix to relay mail from my site to my mail server. Mail is received properly at my Gmail and Hotmail accounts - only Yahoo is the problem. The Yahoo mail headers state: Received-SPF: none (mta1133.mail.mud.yahoo.com: domain of [email protected] does not designate permitted sender hosts) In contrast, the Gmail headers state: Received-SPF: pass (google.com: domain of [email protected] designates 74.50.xxx.xxx as permitted sender) client-ip=74.50.xxx.xxx; Reverse DNS is set up correctly, as is my SPF record. Does anyone have any suggestions as to what I can do to solve the Yahoo problem (short of contacting Yahoo, as this is a brand new mail server)? FYI - domainkeys are on the origin server and are showing as passed. Thanks

  Read the article

• Does NMBD depend on DHCP?

  - by Atilla Filiz

  I am trying to debug a SMB share issue on an embedded Linux setup. Before diving into source code, I want to make sure this is not a configuration problem. So here is my case: Scenario-1: dhcp server enabled by default 1- system boots 2- udhcpcd server starts 3- smb server starts (smbd) 4- nmb server starts (nmbd) 5- smb share accessible Scenario-2: dhcp server disabled by default 1- system boots 2- smbd starts 3- nmbd fails to start 4- smb share inaccessible 5- $/etc/init.d/udhcpcd start 6- $/usr/sbin/nmbd still fails without an error message The client pc and the server device have static IP addresses in both cases. Is it possible that, NMBD somehow depends on a DHCP server at start?

  Read the article

• Load balanced asp.net websites and required memory usage

  - by Matt

  Each of my servers has 8Gb RAM and the memory usage hovers around 7Gb. I have a load balancer available to me but at the moment I'm worried that putting my sites through it will cause the platform to fall over. The load balancer would be configured with a sticky round-robin where a new connection is round robin but subsequent connections for the same source ip will remain on the same server (until a limit is reached). Thats all standard stuff. How do I know what memory usage my sites will need across the platform when I put them through the load balancer? Rather than knowing that a site is using 150mb on a particular server I could face a situation where the 150mb is taken up on each of the servers. I know that with only 1 gb free I could have a serious problem on my hands. If I free up some memory then how can I work out what I need to have free to prevent this from happening? Thanks Matt

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >