Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 291/444 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • Windows Deployment Services

    - by timbrigham
    I have a slightly advanced Windows Deployment Services setup. My router hands out DHCP addresses, including the following config. ip dhcp pool Servers_100 network 192.168.100.0 255.255.255.0 bootfile boot\\x86\\pxelinux.0 next-server 192.168.100.50 default-router 192.168.100.1 dns-server 192.168.100.80 192.168.100.81 This works perfectly for other subnets - I have a couple screens in my pxelinux that allow me to select my various Linux installers or enter the windows preboot environment. For some reason I'm only receiving the default bootfile that opens to the windows preboot environment. Any idea why?

    Read the article

  • multicast tcpdump and subscriptions

    - by Karoly Horvath
    From the multicast howto: IP_ADD_MEMBERSHIP. Recall that you need to tell the kernel which multicast groups you are interested in. If no process is interested in a group, packets destined to it that arrive to the host are discarded. If you don't do that, you won't see those packets with tcpdump. Is it possible to subscribe to all multicast traffic so I can do a tcpdump for all existing traffic? I would think IGMP doesn't allow this, so probably not.. but maybe you can configure a switch to still send all multicast traffic. Is that possible? Is it possible to do subscription (for a specific IP) with a command line tool? (note: I know how to do this in C.. but would prefer to use an existing tool and not compile a separate program for this)

    Read the article

  • Windows 2008 RRAS and PPPoE

    - by Massimo
    I'm trying to use Windows Server 2008's Routing and Remote Access Server to share an ADSL connection which uses PPPoE, but I'm having no luck. I can setup the connection as a broadband Internet connection in Windows, and it works. I can share it using Internet Connection sharing, and it works (but it's not what I need). I have installed and enabled the Routing and Remote Access Service and configured it for NAT with a demand-dial interface; I create the aforementioned interface using PPPoE with the exact same parameters used on the Windows connection; I connected it, and it seems to work: I can also see it gets its public IP address and DNS assigned correctly. But it just doesn't work. The server has no Internet connectivity at all, and PINGing anything on the Internet results in a cryptic "general error". Any help?

    Read the article

  • mdadm email notification - change the default subject

    - by Shirker
    I have entry in my crontab 00 */1 * * * /sbin/mdadm --monitor --scan -1 [email protected] It works more than perfect, but I need to change the default email template. So instead of subject "mdadm monitoring" it wished to be "mdadm monitoring from «IP ADDRESS»" or like that. [root@mail ~]# rpm -ql mdadm-3.2.5-4.el6_4.2.x86_64 | grep -v -E '(man|doc)' /etc/cron.d/raid-check /etc/rc.d/init.d/mdmonitor /etc/sysconfig/raid-check /lib/udev/rules.d/65-md-incremental.rules /sbin/mdadm /sbin/mdmon /usr/sbin/raid-check /var/run/mdadm Is it hardcoded or its possible to change?

    Read the article

  • Two tor clients

    - by Intellektus
    I have been experimenting with the thought of running two Tor clients at once on my machine. So I decided to try it and modified the source a bit to let me run two clients at once (of course with separate data dirs). But they both get the same exit node, and if I try to switch exit node on one of them via its control port, they both get switched. I have been experimenting with this some more, and Tor always seem to get the same IP, even if I run several separate clients (on the same machine) at once. Is this the expected behavior?

    Read the article

  • Can't resolve localhost on Mac OS X Server

    - by iainbeeston
    I have a server running OS X Server 10.5 and it can't resolve localhost to 127.0.0.1. When I try ping this is what happens: ping localhost ping: cannot resolve localhost: Unknown host SSH and web browsers get similar results (uknown host). If I try using 127.0.0.1 or the ip address assigned on the LAN all of the above work. Here's the contents of my /etc/hosts file: cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I have no local DNS service running. Does anyone have any idea why this might be happening or how I can fix it?

    Read the article

  • Trying to administer network setting of server via netsh

    - by Jaime
    Hi there, I am trying to configure the LAN settings of a Windows 2008 server remotely via netsh. I've been trying this command (issued at the client) assuming the IP address of the server is 192.168.0.1: netsh -r 192.168.0.1 -u 192.168.0.1\Administrator -p password lan show config but I keep getting the following message: WARNING: Could not obtain host information from machine [192.168.0.1]. Some commands may not be available. The RPC server is unavailable. Am I understanding the command above properly? Is there a step or two that I missed in setting this up? Thanks in advance. P.S. The Routing and Remove Access service on the server is enabled.

    Read the article

  • Router stopping my python server

    - by drfrev
    This was originally posted in stackoverflow.com but it was suggested I move it here after it was realized it wasn't my code that was wrong. So my problem, very simply, is that I cannot get my computers that are connected to my router to communicate. example: If I ping a wireless computer I get no responce and the Request times out If I ping a computer wired to the modem directly it works fine. When I ping I use the local ip for each case. *if it helps my original post is here: http://stackoverflow.com/questions/12593024/python-cannot-go-over-internet-network/12593361#12593361 And some screen shots of different things are here: http://imgur.com/a/jUZ4G#3 thank you, any help is greatly appreciated. NOTE I am heading off to bed now, so I will respond around 6:00 AM EST if anyone posts some help

    Read the article

  • VM can't connect to outside in bridged mode

    - by Kamal
    I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

    Read the article

  • Restoring WordPress EC2 instance from snapshot results in 403 Forbidden error

    - by Eric Matthew Turano
    This problem has been perplexing me for weeks now. Here's how the issue goes: Launch Amazon Linux 64-bit instance, successfully install WordPress, and site is active w/ no issues Create snapshot of the instance's root volume Shut down instance Create volume from snapshot, attach to instance, and reboot instance Associate Elastic IP with instance Once that's done and I try logging onto the site, I am redirected to myurl.com/wp-admin/install.php and greeted with this message: Forbidden: You don't have permission to access /wp-admin/install.php on this server. Apache/2.2.25 (Amazon) Server at www.myurl.com Port 80 Port 80 is open on the inbound security group settings, so that's not the issue. Keep in mind all I am doing is merely creating a new volume and attaching it to the same instance, and this issue comes up. What am I doing wrong, and how can I create a complete backup of my instance without this error occuring?

    Read the article

  • Finding the A Record for a Home Server [closed]

    - by Ryan Allred
    I have a hosted website that allows me to add subdomains and point them to different locations on the server. I also know that I can change the 'A Record' to point it to a different IP address. Now, here's the question, I have a home server that I need to access though this hosted website's domain name. How would I go about setting up the 'A Record' on the server to point to my home server. I'm usually pretty good about keyword searches but on this one, I'm pretty lost as to what to search for.

    Read the article

  • redirect to 404 wildcard subdomain

    - by Leandro Garcia
    I setup a wildcard A record on my domain registrar. Now if a user access a missing subdomain on my domain, they will be redirected to the homepage. Currently my initial setup was this: <VirtualHost *:80> ServerAdmin webmaster@localhost RewriteEngine On RewriteRule ^(.*)$ http://domain.com$1 [R] DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> # more below... </VirtualHost> Any wildcard subdomain or if my IP is entered via URL will redirect to the homepage. Can I do something about this that will redirect (HTTP redirect perhaps) the wildcard subdomains to 404 page instead of to homepage?

    Read the article

  • Gradually migrate from one SMTP server to another

    - by Bart van Wissen
    I maintain an application that sends out a ton of e-mail on a daily basis. Soon, we will have to migrate to another SMTP-server for that, which has an ip address that has no reputation with respect to email delivery. So instead of just flipping the switch, I would like to start by sending a small percentage of all mail through the new server, and then gradually increase that percentage until we reach 100%. It wouldn't be very hard to implement something in the application itself, but I would like to know if there is an easier, more reliable out-of-the-box-type solution for this. My first thought was to use round-robin DNS for this, but the servers require different credentials, use different protocols (one uses SASL, the other doesn't) and even different port numbers, so I think that rules out the DNS based solution. Is there any way, for example, to configure Postfix to send 1 out of x e-mails to relay host A and the rest to relay host B? Or perhaps a different MTA?

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

    Read the article

  • linux dns server

    - by Clear.Cache
    Can someone explain to me how to easily setup a centos 5 (64bit) dns server? I want to use this strictly for dns for my clients who require rdns (ptr) for their domains. I do have IP delegation/authority from the data center and allocated IPs directly from ARIN. I just want to setup a Centos 5 box to use strictly as a dns server, perhaps with redundancy with a secondary, clustered (or not) dns server Server 1 = dns1.mycompany.com Server 2 = dns2.mycompany.com Then, I need simply instructions on how to create rdns records for clients upon request, especially in bulk amounts. Thank you.

    Read the article

  • Dell OpenManage iDrac

    - by mhouston100
    I have installed OpenManage Server Administrator on a Windows 7 workstation with the assumption that nothing needed to be done on the actual server I am trying to manage. The server has an iDrac v7 component and I was under the impression that OpenManage just connects to that? When I try to connect I put the IP address of the iDrac console and the username/password and I get a 'Connection Error' message. So my question, does OpenManage have to be installed on the server that is to be managed, even if it has a DRAC connection?

    Read the article

  • Windows 7 Connection Sharing unable to access some sites

    - by Kristopher Ives
    I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

    Read the article

  • Redhat with a reverse proxy, a specific configuration

    - by jessica
    The setup I am trying to put together consists on a server connected to the internet (a redhat box) and 2 Apache Tomcat boxes not connected to the internet. Let's call the server Server and the two Apache Tomcats, Apache1 and Apache2. So, assuming my external IP is 102.1.1.1, Apache1 is 10.1.1.1 and Apache2 is 10.1.1.2, what I'm trying to configure is a reverse proxy so that if the request goes into http://102.1.1.1/mywebserver1/ it will be directed to Apache1 and if the request goes into http://102.1.1.1/mywebserver2/ it will be forwarded to Apache2. Now, I don't need a cache on the proxy since there is application sitting in those tomcats and each request needs to get a fresh answer. I searched for a while and I tried building this with Squid but i can't get it to work the way I need it. Anyone knows how to do this? What software do I need? How do I configure the reverse proxy? Thanks! jessica

    Read the article

  • Change the order of DNS lookup when connected in the VPN

    - by qwerty2010
    Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

    Read the article

  • Loadbalance UDP traffic with session affinity and way to take servers in & out of rotation

    - by William
    What is the best way to go about load balancing UDP traffic among a whole bunch of servers, while keeping session affinity based on the users' IP? I need to also be able to take servers in and out of rotation for new clients, so when they join for the first time, they get put on a server in a list of available servers, and clients already connected would stay connected to their specific server. I have written the software to maintain a list, but I can't seem to find anything that would perform this functionality. If you need the context, this is to facilitate game tournaments for Minecraft: Pocket Edition, which is done with UDP traffic, I cannot change the protocol. And, because tournaments open and close, I need to be able to place players on their proper servers. Performance is also a priority, I have a program to do this but it is very bloated and slow. Thanks for any help! William

    Read the article

  • Remote Desktop to Virtual Machine

    - by Valvaris
    Hello: I recently reformatted one of my servers with Windows Server 2008 x64 and with that, installed the latest version of VMWare server on it. Within that, I created a new Windows Server 2003 R2 x86 virtual machine for the purposes of being a backup domain controller. I was able to successfully configure it as a domain controller and have it provide DNS service to my domain. I've been using the VMWare remote console to set this up and figured it was time to get remote desktop working. I set it up as I have with many other computers on my network (hitting the checkbox, making the firewall isn't blocking it) and I cannot get remote desktop to connect to it. I've tried using the computer name and its IP address neither work. I can ping the computer from the outside but the Virtual machine cannot ping anything from inside it. All machines are on the same subnet. I can't seem to figure this out.

    Read the article

  • Cyrus: How Do I Configure saslauthd For Authentication?

    - by Nick
    I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no UPDATE: When setting: sasl_pwcheck_method: alwaystrue in /etc/imapd.conf, login works correctly. So I'm assuming the issue is saslauthd related.

    Read the article

  • Connect iPad to windows 7 VPN

    - by Linuz
    My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

    Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >