Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 285/729 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• Wired connection not being recognized

  - by maxifick

  I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

  Read the article

• Aero to Accelerate Android Application Development

  The mobile application development arena saw the dawn of a new mobile handset that capitalized on the rapid strides that have recently characterized the Android application development scene. The Aero is an Android handset unveiled by AT&T developed in the trusted stables of Dell. The Android smartphone has laid to rest all rumours that have floated around Dell's launch of their first Android device.

  Read the article

• please look my first project [closed]

  - by gökhan

  good night my project is about that Write a program that uses a loop to calculate the first 15 values of the Fibonacci number sequence and store them in an array, call it FibArr, of size 15 DWORDS. Fibonacci number sequence is described by the following formula: Fib(1) = 1, Fib(2) = 1, Fib(n) = Fib(n -1) + Fib(n - 2). Place each value in the EAX register and display it with a call DumpRegs statement.So I dont have an idea about this topic please help me thanks

  Read the article

• Managing Images in Web Development

  Images are an important ingredient of web content. Since developers have little control over the display of website, they need to follow some norms to ensure perfect display of images on the target device. The prescribed standard of managing images while developing web pages are as follows:

  Read the article

• problem after suspend ubuntu 12.04

  - by alex

  I'd like to have a thing cleared. I just started using Ubuntu and installed 12.04 the only problem is that when i turn my laptop back on after suspension i get a black screen with this written: legacy_resume():pnp_bus_resume+0x0/0x70 return -19 PM: Device 00:09 failed to resume: error -19 i8042: Can't reactivate AUX port and after this message at times my touchpad doesn't work as well. I am currently using a vpc eh2n1e thanks for the support

  Read the article

• Google Drive SDK: Writing your first Drive app on Android

  Google Drive SDK: Writing your first Drive app on Android If you want to write a Drive app on Android and don't know how to get started, this is the sessions for you. We'll start from the very basics and go through all the steps needed to build an Android app that uses the device camera to take pictures and upload them to Google Drive. From: GoogleDevelopers Views: 0 0 ratings Time: 03:30:00 More in Science & Technology

  Read the article

• GNU GRUB version 1.99-21ubuntu3 with windows installer

  - by fwrlfo

  I have this problem after damage I think hit the OS GNU GRUB version 1.99-21ubuntu3 Minimal bash-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. I read the thread that was posted before but I don't have an ubuntu cd because I used "windows installer" ..... please don't tell me to uninstall it and install it again because I have important files and I don't want to lose. please help

  Read the article

• Windows Phone 7 Isolated Storage Explorer

  - by help.net

  WP7 Isolated Storage Explorer is a tool designed to help developers and testers interact with the isolated storage file for Silverlight Windows Phone 7 applications. The explorer can work both as a desktop application for testers or integrated in Visual Studio for developers. Whenever a WP7 application/project involves storing data locally the the device, it will be to the isolated storage file. A common difficulty is accessing the data for testing or rapidly restoring the application's data/state...(read more)

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• Where I can find /sbin/hotplug in my kernel source

  - by Rahul

  I am reading hotplug events. And I want to enable automatic loading unloading module, when a new device is added. For that I read that kernel does it using /sbin/hotplug script, but I am not able to find it in my source code, can someone help me out where can I find it? Also when I tried to do cat /proc/sys/kernel/hotplug there is nothing coming in output, I am running the same kernel which I downloaded and built.

  Read the article

• Download And Convert YouTube To IPad On Mac

  YouTube.com is a great resource. YouTube allows users to freely upload, view, and even share video clips on your blog or web site. Now the new iPad is a much better device to videos on than any previ... [Author: Bellu Su - Computers and Internet - May 09, 2010]

  Read the article

• No sound on Dell Inspiron 6400n

  - by yanski

  After a clean install of Ubuntu 12.04 on my Dell Inspiron 6400n Laptop there is no sound on any application I use apart from the log in screen ready noise. If I click on the speaker icon on the top panel then sound settings it tells me that the default playback device is S/PDIF. In alsamixer the slider is set to zero. I am sure it should be HDA intel or similar. How can I get the sound working please...?

  Read the article

• Windows 8.1 erased Ubuntu 14.04 partition

  - by Caumons

  I had Ubuntu 14.04 installed with a Windows 7 dual boot. Now, I've just replaced W7 by Windows 8, but the Ubuntu partition has disappeared! Running fdisk -l doesn't show /dev/sda5 (which was the Ubuntu partition), if I access to Gparted, it shows the Ubuntu partition as "empty space" and from Windows 8's device manager, this partition also appears as empty space! WTF has happened here? Has the partition been actually erased?

  Read the article

• Ubuntu Won't Install On Custom Build

  - by Dallas

  just built my first computer, trying to install Ubuntu, when I tell my BIOS to startup from disk drive it says "Please insert boot media into boot device" so I insert my burned disc and my computer thinks for a few seconds and then prompts me again. Any idea why? Tried multiple times, burned two discs, I have even confirmed that my build works by swapping hard drives with the computer I'm currently using to post this, so I'm kinda out of answers right now and hoping you guys can help me find something I've done wrong, thanks in advance for any help.

  Read the article

• help me with my wine, it doesn't work properly

  - by Sebastian Raun Mikkelsen

  When I try to run something with wine, nothing happens! I have many had problems with Ubuntu so I have tried to get Windows 8 back on the computer, but because Ubuntu can't run exe files I can't open the installer. Furthermore my computer can't boot from a CD/DVD anymore after I installed Ubuntu, it turns up with a black screen with a blinking marker at the upper left corner of the screen and after 10 minutes it says something like Can't boot from the selected media device - select another How do I get Windows back?

  Read the article

• Be Careful With Content Providers

  The notion of a Content Provider is central to getting things done in an Android application. This is the mechanism used to expose many of a device's data...

  Read the article

• Bluetooth not finding any devices on 12.10

  - by DeanGrobler

  When I switch on my bluetooth and search for devices my laptop doesn't find any even though there's plenty in the area. Most likely this is because of drivers that are missing. So what I want to know is if there's a way I can view the exact details of what bluetooth device I have built into my laptop so I can start searching for a linux version of the needed driver. Any tips? PS - Running 64bit 12.10

  Read the article

• Are there any limitations to using WinRT instead of .Net?

  - by jerrykobes

  From my understanding creating an application that runs on multiple architectures requires virtualization, and virtualization reduces performance since it creates a layer of abstraction. With Windows 8 supporting both Intel and ARM architectures should we expect slower performance with a WinRT app versus a .Net app running on an Intel device? Also, will WinRT support database connectivity and active directory access?

  Read the article

• Should the main game object be static in c++

  - by Som_kun

  I am creating a 2d platformer using SDL and I was thinking that my game object could be static, but I wasn't sure if this was a good idea. The pros (that I can see): Accessing settings options (such as screen size and keyboard bindings) would be easier accessed There should only ever be one main game loop, so this makes sure for me. The cons: From what I've heard, static classes in C++ are a bear to work with I've read that this may cause problems later in development (things don't work right or can't be used properly

  Read the article

• Question about Byte-Pairing for data compression [closed]

  - by user1669533

  Question about Byte-Pairing for data compression. If byte pairing converts two byte values to a single byte value, splitting the file in half, then taking a gig file and recusing it 16 times shrinks it to 62,500,000. My question is, is byte-pairing really efficient? Is the creation of a 5,000,000 iteration loop, to be conservative, efficient? I would like some feed back on and some incisive opinions please. Best Regards.

  Read the article

• How can I install Ubuntu on my Nexus 7 while being able to recover from an Nandroid backup?

  - by MagicFab

  I use CyanogenMod and ClockWork Recovery on my Nexus 7. How can my existing full nandroid backup be used to restore my device after installing Ubuntu? The instructions assume "recovery" would mean re-flashing the vanilla image, at factory, data-wiped condition. It would be useful to provide a .zip that can be flashed via Clockwork (or other) recovery usin ROM Manager or booting into recovery and back to whatever Nandroid backup there is - much as any other ROM is provided/used.

  Read the article

• Problem in shared folder

  - by alsadi90

  I followed the steps for sharing folders between windows 7 and Ubuntu in virtual box. but the folder appear with X sign and give me the following message when open it "the folder conent could not be displayed" and when choose "shared folder" from "Device" menu the following is written below "on the system page , you have asigned more than 50% of your computer's memory (2.93) to the virtual machine ...

  Read the article

• WIF in .NET 4.5&ndash;First Observations (2)

  - by Your DisplayName here!

    WindowsIdentity, FormsIdentity and GenericIdentity now derive from ClaimsIdentity WindowsIdentity.GetCurrent() converts Windows token details (groups for the current Windows versions) to claims. Claims for Windows identities now distinguish between user claims and device claims (Windows 8 feature) WCF now populates Thread.CurrentPrincipal with a ClaimsPrincipal derived type

  Read the article

• Intel Graphic card problem

  - by user10406

  Hello, I am facing a problem in installing the right driver for my computer "HP dv4 2154ca" The problem that I tried to install it couple of times but the xorg.conf file is still empty no matter what So my question is why is this file empty and how could I generate it correctly for my device The problem that I think this thing is causing is that when I maximize flash to full screen it lags the video will go slower while the sound will go smooth Thanks in advance

  Read the article

• Frequently Asked Questions - Oracle Xsigo Products

  - by Cinzia Mascanzoni

  Oracle-Xsigo products provide dynamic, virtualized connectivity from any server to any storage or networking device in the data center all over a converged, high-performance physical infrastructure. To learn more, click here for responses to frequently asked questions (FAQs) about Oracle-Xsigo products.

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >