Search Results

Search found 38274 results on 1531 pages for 'getting started'.

Page 286/1531 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

• IPv6: Can't ping anything - "Operation not permitted"

  - by Matthew Iselin

  I've been working on getting IPv6 support into my network, and had everything working properly for a short while. The server is running Ubuntu Server 8.10. Now however whenever I attempt to do anything related to IPv6 on the server, I get "Operation not permitted". This is coming from things like wide-dhcpv6-client (when trying to get an IPv6 address from the ISP) and radvd - both log errors of this type into syslog. Even pinging the loopback interface fails: xxx@gordon:~$ ping6 ::1 PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms xxx@gordon:~$ sudo ping6 ::1 sudo: unable to resolve host gordon PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms As you can see, I have attempted pinging as root, as most of the material I've found on the internet points to a permission problem. However, that has not helped. Any hints to getting unstuck would be appreciated.

  Read the article

• MySQL table does not exist

  - by Phanindra

  I am getting following error in err file. 110803 6:51:26 InnoDB: Error: table `ims`.`temp_discoveryjobdetails` already exists in InnoDB internal InnoDB: data dictionary. Have you deleted the .frm file InnoDB: and not used DROP TABLE? Have you used DROP DATABASE InnoDB: for InnoDB tables in MySQL version <= 3.23.43? InnoDB: See the Restrictions section of the InnoDB manual. InnoDB: You can drop the orphaned table inside InnoDB by InnoDB: creating an InnoDB table with the same name in another InnoDB: database and copying the .frm file to the current database. InnoDB: Then MySQL thinks the table exists, and DROP TABLE will InnoDB: succeed. InnoDB: You can look for further help from InnoDB: http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html And when I do the same, like copying the frm file from other database to here and drop the table, i am getting following error, InnoDB: Error: trying to load index PRIMARY for table ims/temp_discoveryjobdetails InnoDB: but the index tree has been freed! 110803 6:50:26 InnoDB: Error: table `ims`.`temp_discoveryjobdetails` does not exist in the InnoDB internal InnoDB: data dictionary though MySQL is trying to drop it. InnoDB: Have you copied the .frm file of the table to the InnoDB: MySQL database directory from another database? InnoDB: You can look for further help from InnoDB: http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html Please any one help me out of this. Also can any one tell me why this error is coming. EDIT: The issue is occurring only when disk size is full and when we use Truncate table. Also this is occurring only in 5.1 version but not in 5.0 version.

  Read the article

• SQL Server 2008 login problem with ASP.NET application: Failed to open the explicitly specified data

  - by eulerfx

  I am running SQL Server 2008 Express Edition on Windows Server 2008 with an ASP.NET application which must access the server. The ASP.NET application is associated with an application pool that runs on the NetworkService account. This account in turn has a Login and User record on SQL Server in the required database. When I attempt to run the ASP.NET website I get a blank page and when viewed in the error log, I seem to be getting this information event record: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Failed to open the explicitly specified database. [CLIENT: myLocalMachine] The connection string has Trusted_Connection=True; and the required database specified. When I explicitly specify the user name and password I get another login error stating the password is incorrect, even though the same un/pw combination works through SQL Server Management studio. The NETWORK SERVICE account seems to have all the required privileges for the database. Also, I made a test ASP.NET website project which does a simple select from a table in that database, and using the same config file I am not getting the error and it seems to work. Is it something to do with trust levels then, because the original ASP.NET web app references various DLLs including open source libraries. Also, the application does not seem to be able to write to the event log itself, throwing a security exception, even though everything in the config files, including machine.config states the app is in full trust.

  Read the article

• Can't install NPM after installing Node on EC2 Linux instance?

  - by frequent

  I'm trying my first attempt on getting a node server set up on an amazon ec2 linux instance. I think I made it quite far. First problem I ran into was when trying to make Node the connection timed out after a while, so I need three attempts until I got this: LINK(target) /home/ec2-user/node/out/Release/node: Finished touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_header.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_provider.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_ustack.stamp touch /home/ec2-user/node/out/Release/obj.target/node_etw.stamp make[1]: Leaving directory `/home/ec2-user/node/out' ln -fs out/Release/node node Which tells me, "Node is done", although I'm not sure it is also working as it should. Following this,this and this tutorial, I'm now stuck at installing npm. I think I first cloned into the wrong folder, which always gave me error 127, but even if I'm doing this: cd ~ git clone git://github.com/isaacs/npm.git cd npm sudo -s PATH=/usr/local/bin:$PATH make install I'm still getting this: #after cloning# make[1]: Entering directory `/root/npm' node cli.js install bash: node: command not found make[1]: *** [node_modules/.bin/ronn] Error 127 make[1]: Leaving directory `/root/npm' make: *** [man/man3/start.3] Error 2 Question:: Since I'm pretty much a newby at everything I'm trying here, can someone please tell me what I'm doing wrong and how to get npm to install? Also, in case I cloned into the wrong folder, is there a way to remove the "false clone" or is this not written to disk until I call make install and I don't need to worry? Thanks for helping out!

  Read the article

• TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

  - by Broam

  Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

  Read the article

• Firefox Won't Save My Google Cookies Between Restarts

  - by Tom Purl

  I'm using firefox 11 on Ubuntu. For some strange reason, Firefox won't save my google cookies between browser restarts. I have to log in to gmail every time I restart my browser, even if I click on the check box that tells Google to remember me. The strange thing is that Firefox does actually store some gmail cookies when I log in. It's just that those cookies disappear after restarting Firefox. The especially strange thing is that this only seems to happen with *.google.com url's. I haven't noticed this problem with any other site that I use. Please note that I tried to see if this was a plugin-related problem. I therefore started Firefox in safe mode and turned off all plugins. I then logged into Gmail and told it to remember me. I then shut down Firefox and started it the same way in safe mode. I got the same bad results. Has anyone else ever seen anything like this before? Is there a reason that Firefox seems to be blacklisting Google cookies?

  Read the article

• Need help with some IIS7 web.config compression settings.

  - by Pure.Krome

  Hi folks, I'm trying to configure my IIS7 compression settings in my web.config file. I'm trying to enable HTTP 1.0 requests to be gzip. MSDN has all the info about it here. Is it possible to have this config info in my own website's web.config file? Or do i need to set it at an application level? Currently, I have that code in my web.config... <system.webServer> <urlCompression doDynamicCompression="true" dynamicCompressionBeforeCache="true" /> <httpCompression cacheControlHeader="max-age=86400" noCompressionForHttp10="False" noCompressionForProxies="False" sendCacheHeaders="true" /> ... other stuff snipped ... </system.webServer> It's not working :( HTTP 1.1 requests are getting compressed, just not 1.0. That MSDN page above says that it can be used in :- Machine.config ApplicationHost.config Root application Web.config Application Web.config Directory Web.config So, can we set these settings on a per-website-basis, programatically in a web.config file? (this is an Application Web.config file...) What have i done wrong? cheers :) EDIT: I was asked how i know HTTP1.0 is not getting compressed. I'm using the Failed Request Tracing Rules, which reports back:- DYNAMIC_COMPRESSION_START DYNAMIC_COMPRESSION_NOT_SUCESS Reason: 3 Reason: NO_COMPRESSION_10 DYNAMIC_COMPRESSION_END

  Read the article

• OCZ Vertex 3 SSD boot failure

  - by Col Zero

  Ok, so I just purchased and received a 120GB OCZ Vertex 3. I had Windows 7 on an .ISO file on my computer. I formatted a USB stick and configured it to be read as a CD so that I could install windows onto my SSD from it. I started my comp, had the boot priority set to my USB, starting installing windows 7 to my SSD. And out of no where (I wasn't watching) my computer restarted and it brought me back to the beginning of the Windows 7 set-up. So I turned my computer off and booted it up from the SSD to see if it had installed onto the SSD. The first 2 attempts I had a disk boot failure. So I plugged my hard drive back in, started my computer, turned it off, plugged the SSD back in (literally) and it booted up fine/ Finalized windows got internet set up, and Windows had updates that required a restart. So I restarted and had another disk boot failure. Now I have a disk boot failure every time I try to start my computer up through my SSD. Extra Info: My SSD has never been able to be detected in my BIOS unless my Hard Drive was unplugged (eve then my BIOS didn't always detect it). MY SSD wasn't detected in my BIOS the first and only time it successfully booted up. My SSD literally boots up successfully randomly (only once unfortunately) and is detected in my BIOS randomly. I've tried switching cords etc and nothing has worked. I just want to get this damn thing running so I can see whats its like. I finally found a way to get the OS on this sucker and now it won't even boot up. Any help appreciated

  Read the article

• How do I fix libdispatch problem crashing Mac OS X apps?

  - by david-ocallaghan

  In the last day I have started having a lot of brokenness on my Mac (MacBook Air running Mac OS X 10.6.2 with all software updates). Most noticably, iTunes no longer syncs with my iPhone. It fails with a crash dialog reporting "AppleMobileDeviceHelper quit unexpectedly" and an error dialog "iTunes was unable to load dataclass information from SyncServices. Reconnect or try again later." I've attempted the fix at support.apple.com/kb/HT1747 but it failed. I've also been having problems (at first seemingly unrelated) with the horrible Cisco VPN client, which started giving me this error: Error 51: Unable to communicate with the VPN subsystem I followed the steps at www.anders.com/cms/192/CiscoVPN/Error.51:.Unable.to.communicate.with.the.VPN.subsystem which don't seem to work for me, although I can connect if I use the command line with sudo : sudo vpnclient connect MyProfile I had a look in the Console app at the diagnostic messages and I noticed a pattern, that a number of apps were reporting "BUG IN CLIENT OF LIBDISPATCH". The affected programs are: AppleMobileBackup AppleMobileDeviceHelper Safari Webpage Preview Fetcher cvpnd (the Cisco VPN daemon) Of these, only the last is non-Apple software! The common text in the diagnostic messages is: Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Crashed Thread: 1 Dispatch queue: com.apple.libdispatch-manager Application Specific Information: BUG IN CLIENT OF LIBDISPATCH: Do not close random Unix descriptors I'm beginning to wonder if there's a permissions problem, or corruption of an important library, ... I should note that I've rebooted several times and verified the disk permissions and the disk. Any help would be great!

  Read the article

• Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

  - by gotqn

  A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• DFS replication and the SYSTEM user (NTFS permissions)

  - by HopelessN00b

  Question for which I'm having trouble finding an answer on Google or Technet... Does granting the SYSTEM user permissions to DFS-shared files and folders have any effect on DFS replication? (And while we're at it, is there any good reason not to let SYSTEM have permissions to DFS-shared files?) It comes up because I have a collection of DFS namespaces and folders that I'm not able to make someone else's problem, and while troubleshooting a problem where one DFS replica just wasn't replicating with another for no discernible reason, I observed that the SYSTEM didn't have any permissions granted to any of the files or folders in the folder in question. So I set SYSTEM to have full control and propagated it down, and our DFS health diagnostic reports went from showing a backlog of ~80 files to a backlog of ~100,000... and things started replicating, including a number of files that had been missing on one server or the other (so more than just the permissions changes started replicating). Naturally, this made me curious as to whether or not DFS needs the SYSTEM account to have permissions to do its work, or if perhaps it was just any change to folder tree in question that prompted DFS to jump into action. If it matters, our DFS namespaces were set up under 2000/2003, and I have just recently finished upgrading all the servers to 2008 R2 or 2012 (with UAC enabled, blech), but have not yet gotten around to raising the DFS namespace functional levels to Server 2008. (And bonus points if anyone has an official Microsoft article on NTFS file permissions and the SYSTEM account as it pertains to DFS or network files.)

  Read the article

• VMware virtual machine network devices malfunctioning

  - by sheepz

  I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

  Read the article

• Problems with OpenVPN setup

  - by user70617

  Hi, I'm trying to set up a VPN server using OpenVPN and I'm getting some errors while trying to connect the client to the server. I'm getting the following error: Sun Feb 13 14:54:16 2011 OpenVPN 2.1.4 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] built on Feb 5 2011 Sun Feb 13 14:54:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Feb 13 14:54:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Feb 13 14:54:16 2011 ******* WARNING *******: all encryption and authentication features disabled -- all data will be tunnelled as cleartext Sun Feb 13 14:54:16 2011 RESOLVE: NOTE: localhost resolves to 2 addresses Sun Feb 13 14:54:16 2011 Note: Cannot ioctl TUNSETIFF tap0: Device or resource busy (errno=16) Sun Feb 13 14:54:16 2011 Note: Attempting fallback to kernel 2.2 TUN/TAP interface Sun Feb 13 14:54:16 2011 Cannot open TUN/TAP dev /dev/tap0: No such file or directory (errno=2) Sun Feb 13 14:54:16 2011 Exiting I have bridge-utils installed and tap0 shows up in ifconfig. Can anybody give me a hand? Thanks in advance.

  Read the article

• General logging won't work in MySQL

  - by leonstr

  I saw on SF that there's an option in MySQL to log all queries. So, in my version (mysql-server-5.0.45-7.el5 on CentOS 5.2) this appears to be a case of enabling the 'log' option, so I edited /etc/my.cnf to add this: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql old_passwords= log=/var/log/mysql-general.log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I then created the file and set permissions: # touch /var/log/mysql-general.log # chown mysql. /var/log/mysql-general.log # ls -l /var/log/mysql-general.log -rw-r--r-- 1 mysql mysql 0 Jan 18 15:22 /var/log/mysql-general.log But when I start mysqld I get: 120118 15:24:18 mysqld started ^G/usr/libexec/mysqld: File '/var/log/mysql-general.log' not found (Errcode: 13) 120118 15:24:18 [ERROR] Could not use /var/log/mysql-general.log for logging (error 13). Turning logging off for the whole duration of the MySQL server process. To turn it on again: fix the cause, shutdown the MySQL server and restart it. 120118 15:24:18 InnoDB: Started; log sequence number 0 182917764 120118 15:24:18 [Note] /usr/libexec/mysqld: ready for connections. Can anyone suggest why this isn't working?

  Read the article

• win8: access denied to external USB disk; update access rights fails

  - by Gerard

  I use to work with 2 laptops (vista and win7), my work being files on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take win8. 1/ I suspect something changed with access rights, as my external disk suffered some "access denied" problem on win8. I was prompted (by win8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying "disk is not ready". Additonnally, the usb somehow was not recognized anymore. 2/ Back to win7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them i could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under win7, all the folder showed with a lock. 3/ Then back again to win8. Same problem : access denied to my disk + no way to change access rights as it gets stuck "disk is not ready". Now I am pretty sure there is some kind of bug or inconsistence in win8 / win7. I did 2/ and 3/ a few times. At some point, I also got an access denied in win7. I could restore access rigths to the disk to "system" (properties - security - EDIT for full control to group "system" ...). But then I still get the same access right pb on win8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. Now, after I tried for more than 3 days, I am losing my patience with that bloody win8 which I did not want to buy but had no choice. I upgraded win8 with the windows updates available. Does not help. Anybody can help me ?

  Read the article

• IIS7 Session ID rotating with Classic ASP

  - by ManiacZX

  I am trying to migrate a Classic ASP app onto a Windows 2008 R2 server. The application features run fine, but I am having issue with session. The application keeps the logged in user information in session and I am constantly getting knocked out as if the session had expired. While debugging I have discovered the sessions are not expiring but instead I am getting 2-3 different Session IDs in use by one browser. I am outputting Response.Write(Session.SessionID) on various pages in the application and I can sit there and hit refresh over and over and watch the number changed between these 2-3 SessionIDs randomly. The sessions are still valid because when I refresh and get the Session ID that I logged in under the page is displayed (because the security check was successful) and when I get one of the other Session IDs I get the "you aren't logged in, you need to log in" message. If I close and re-open the browser, same story just the set of IDs are new. This happens with IE8, Firefox and Chrome from multiple computers. Things I've tried: - AppPool set to No Managed Code and Classic - Output Caching set .asp to never cache - ASP Session Properties enabled and disabled asp session state and confirmed it affected page (error trying to read Session.SessionID when disabled) Things I've tried just in case but shouldn't have anything to do with ASP Session: - Disabled compression - Changed ASP.Net Session State properties (InProc, StateServer, SQLServer, Cookies, URI, etc) -

  Read the article

• Gmail and FB is not rendering properly in Firefox

  - by Andy

  I am unable read Gmail in my Firefox browser on my laptop. However, there are no problems when I try to access Gmail on my office desktop. In fact, Gmail renders fine on IE on both computers. Things I have tried: Uninstalling and reinstalling Firefox. Using Firefox 3.6.26 and Firefox 10; same problem. Clearing the cache. But all to no avail. For starters: My background image does not get loaded. It says "Oops. Your selected image failed to load". The buttons for the new look do not get rendered, but when I do a mouse-over I see text which helps me navigate. When I try to read a message, I see the subject line and I see the reply / forward box. The message body does not get rendered, it seems like a styling error. Check this screenshot where the icons in the GMail new look are not rendered properly Check this screenshot where even facebook is not getting rendered properly EDIT: 25th Feb 2012 GMAIL is getting rendered fine in the old look

  Read the article

• PXE boot -- kernel not found on TFTP server

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• Ubuntu server PPTPD with OS X clients Problems

  - by Nakedsteve

  I'm trying to get a PPTP server running on a ubuntu server, but I've run into some issues with it. I followed this guide on how to set up pptpd on my server, and everything went smooth, but when I try to connect with my mac, it gives me this error: Here's my configuration: Does anyone have any idea as to what I'm doing wrong here? Update: Here's what the pptpd.log has to say about it: steve@debian:~$ sudo tail /var/log/pptpd.log sudo: unable to resolve host debian Sep 3 21:46:43 debian pptpd[2485]: MGR: Manager process started Sep 3 21:46:43 debian pptpd[2485]: MGR: Maximum of 11 connections available Sep 3 21:46:43 debian pptpd[2485]: MGR: Couldn't create host socket Sep 3 21:46:43 debian pptpd[2485]: createHostSocket: Address already in use Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection started Sep 3 21:46:56 debian pptpd[2486]: CTRL: Starting call (launching pppd, opening GRE) Sep 3 21:46:56 debian pptpd[2486]: GRE: read(fd=6,buffer=204d0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 3 21:46:56 debian pptpd[2486]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 3 21:46:56 debian pptpd[2486]: CTRL: Reaping child PPP[2487] Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection finished My pptpd options are: asyncmap 0 noauth crtscts lock hide-password modem debug proxyarp lcp-echo-interval 30 lcp-echo-failure 4 nopix

  Read the article

• Is there a way to "burn" audio to an ISO? (as an audio CD)

  - by Sootah

  I have an audiobook that I've downloaded via their download manager, and it's loaded into their cutesy little audio program that they force you to use. I can play the book just fine using their proprietary software, and while it's annoying when using my PC, it's utterly UNBEARABLE when I try to listen to it on my Blackberry. The program is INSANELY slow, it literally takes around 30 seconds to switch between tracks, so if I've forgotten where I am in the book it takes me around 15 minutes to finally get to where I was at. I've looked everywhere on how to transcode the book to .MP3, but evidently with their current format it's either extremely convoluted (and I have no desire to dick around with installing some older version of the codec, getting a different transcoding app, and then wrestling with getting it to actually work). Since I'm able to burn a copy of the book to an audio CD, I figure the best way to go about this is to just make the CDs and then rip them off of those to .MP3. In order to avoid wasting two hours, not to mention 14 CD-R's, I was wondering if there's a way to "burn" to an .ISO instead of an actual CD-R. I currently have SlySoft's Virtual CloneDrive installed, so I can mount .ISO's easily enough, but now I want to actually create an ISO via the CD burning process. Just in case I've not explained myself very well, here is an overview of what I intend to do: "Burn" a set of Audio CD .ISOs from the audiobook (hopefully I can do this using Windows Media Player, otherwise I'll be forced to use the audiobook app) Mount an .ISO in Virtual CloneDrive Rip the audio tracks on the mounted .ISO to .MP3s Repeat steps 2-3 until the entire book is in .MP3 format Copy .MP3s to my Blackberry so that I'm not driven insane every time I want to listen to the book in the car, and be able to use Winamp when listening on my computer EDIT: I'd suppose a rather concise way to put it is that I need something that will emulate a CD-R drive, so that you can select it as the output drive in whatever app your burning the audio CD from. (I'd suppose that when you "insert a blank CD-R" the app would then ask you what file to save to)

  Read the article

• Sharing disk volumes across OpenVZ guests to reduce Package Management Overhead

  - by andyortlieb

  Is it feasible to create a single "master" OpenVZ guest who would only be used for package management, and use something like mount --bind on several other OpenVZ guests sort of trick them into using the environment installed by the master guest? The point of this would be so that users can maintain their own containers, and yet stay in sync with the master development environment, so they'll always have the latest & greatest requirements without worrying too much about system administration. If they need to install their own packages, could put them in /opt, or /usr/local (or set a path to their home directory)? To rephrase, I would like several (developer's, for example) OpenVZ guests whose /bin, /usr (and so on...) actually refer to the same disk location as that of a master OpenVZ guest who can be started up to install and update common packages for the environment to be shared by all of this group of OpenVZ guests. For what it's worth, we're running Debian 6. Edit: I have tried mounting (bind, and readonly) /bin, /lib, /sbin, /usr in this fashion and it refuses to start the containers stating that files are already mounted or otherwise in use: Starting container ... vzquota : (error) Quota on syscall for id 1102: Device or resource busy vzquota : (error) Possible reasons: vzquota : (error) - Container's root is already mounted vzquota : (error) - there are opened files inside Container's private area vzquota : (error) - your current working directory is inside Container's vzquota : (error) private area vzquota : (error) Currently used file(s): /var/lib/vz/private/1102/sbin /var/lib/vz/private/1102/usr /var/lib/vz/private/1102/lib /var/lib/vz/private/1102/bin vzquota on failed [3] If I unmount these four volumes, and start the guest, and then mount them after the guest has started, the guest never sees them mounted.

  Read the article

• Mac OS X L2TP VPN won't connect

  - by smokris

  I'm running Mac OS X Server 10.6, providing an L2TP VPN service. The VPN works just fine when connecting from all computers except one --- this one computer stays at the "Connecting..." stage for a while, then says "The L2TP-VPN server did not respond". In the console, I see this: 6/7/10 10:48:07 AM pppd[341] pppd 2.4.2 (Apple version 412.0.10) started by jdoe, uid 503 6/7/10 10:48:07 AM pppd[341] L2TP connecting to server 'foo.bar.baz.edu' (256.256.256.256)... 6/7/10 10:48:07 AM pppd[341] IPSec connection started 6/7/10 10:48:07 AM racoon[342] Connecting. 6/7/10 10:48:07 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 1). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 2). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 3). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 4). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 5). 6/7/10 10:48:11 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:14 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:17 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). ...and the "retransmit" messages continue until the error message pops up. So far I've unsuccessfully tried: rebooting deleting the VPN profile and recreating it verifying the client's internet connection (it is able to reach the VPN server) connecting through several different networks (in case a router was blocking VPN packets) disabling the Mac OS X Firewall on the client making sure that the VPN settings exactly match those of other working computers running software update (the client is on 10.6.3) Any ideas?

  Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >